PIN LPSR_GPIO1_IO04 is LPSR pin, then move it to iomuxc_lpsr
node. And remove the dummy pin group for the PIN.
Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
one of the sai3 pinctrl should be in lpsr iomux group rather than
in iomux group, which messes up the QSPI iomux control.
Signed-off-by: Han Xu <han.xu@nxp.com>
Otherwise, the system will hang if USB driver try to access
portsc register.
Cc: André Draszik <git@andred.net>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Without configuring this pinctrl, the ID value can't be got correctly,
then, the dual-role switch can't work well.
Signed-off-by: Peter Chen <peter.chen@nxp.com>
pinctrl-assert-gpios, this property does not exist in upstream, need add
back.
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
(cherry picked from commit 4577fefdc5bc5e7de7a0a2f904fefc8445d68ac9)
pinctrl-assert-gpios and registers-default, these properties does not exist
in upstream, need add back.
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
(cherry picked from commit 8492eb228a80712059d1873c613954b180f009ae)
Add assigned-clocks for audio PLL
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
(cherry picked from commit 12727b6d7c6f47452c14da34edc9c1194ea81cde)
This patch changes LDB_DI0/1_SEL clock's parent from PLL3_USB_OTG to
PLL2_PFD0_352M so that it aligns with imx_4.19.y kernel. Also, with
this patch applied, the clock tree may provide ~64.6MHz pixel clock
rate to the Hannstar XGA LVDS panel, which is closer to the desired
65MHz(before the change, it's ~68.5MHz).
Signed-off-by: Liu Ying <victor.liu@nxp.com>
(cherry picked from commit 142b7222bbebe521d3f4b8d3850c40bd7660a7cf)
This patch changes LDB_DI0/1_SEL clock's parent from PLL3_USB_OTG to
PLL2_PFD0_352M so that it aligns with imx_4.19.y kernel. Also, with
this patch applied, the clock tree may provide ~64.6MHz pixel clock
rate to the Hannstar XGA LVDS panel, which is closer to the desired
65MHz(before the change, it's ~68.5MHz).
Signed-off-by: Liu Ying <victor.liu@nxp.com>
(cherry picked from commit a76d0c86ada7717c1cb556a1ac1fc4dd022db8bc)
change cpu-dai to audio-cpu for alignment between
imx-wm8962 and fsl-asoc-card
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
(cherry picked from commit 010293d320968ac8b74ae2beff2815574efaf2a6)
change compatible string for sdma
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
(cherry picked from commit 12c7a2a0fa87a09977eb5582a28f39db29b11f00)
on imx6qp sabresd board, use different regulators for AVDD and DOVDD
power supply for camera ov5640 (both parallel and mipi).
Signed-off-by: Robby Cai <robby.cai@nxp.com>
(cherry picked from commit 2f372c5776fd84541577bc61a9501795206d1dd0)
Improve model name which is used as machine name in
soc driver to meet test team's auto test requirement.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
(cherry picked from commit b7d8943bb1b2342a431424e7e4c3c9094d35fa5c)
cpu clocks should match cpufreq's clk table, otherwise,
cpufreq driver probe will fail.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
(cherry picked from commit ca2dadb6be4a30b3b8b429faa2bbbd8c86ab9eae)
on SDB board, LCD1_DATA07 is shared by lcdif1 and csi1, so add -lcdif1 dts
file to resovle the conflict.
[ 503.947201] imx6sx-pinctrl 20e0000.iomuxc: pin MX6SX_PAD_LCD1_DATA07 already requested by 2220000.lcdif; cannot claim for 0-003c
[ 503.958957] imx6sx-pinctrl 20e0000.iomuxc: pin-59 (0-003c) status -22
[ 503.965560] imx6sx-pinctrl 20e0000.iomuxc: could not request pin 59 (MX6SX_PAD_LCD1_DATA07) from group csigrp-0 on device 20e0000.iomuxc
Signed-off-by: Robby Cai <robby.cai@nxp.com>
Add csi node on imx6ul
This has different clocks versus upstream.
Signed-off-by: Robby Cai <robby.cai@nxp.com>
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
use internal version and resolve conflict with upstreaming code.
add the nodes for v4l2 capture, mipi csi, and ov5460 cameras.
Signed-off-by: Robby Cai <robby.cai@nxp.com>
Fugang Duan