Some DCE8 boards have a funky BlankCrtc table that results
in a timeout when trying to blank the display. The
timeout is harmless (all operations needed from the table
are complete), but wastes time and is confusing to users so
work around it.
bug:
https://bugs.freedesktop.org/show_bug.cgi?id=73420
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
This is effectively a revert of 4573388c92.
Forcing a display active when there is none causes problems with
dpm on some SI boards which results in improperly initialized
dpm state and boot failures on some boards. As for the bug commit
4573388c92 tried to address, one can manually force the state to
high for better performance when using the card as a headless compute
node until a better fix is developed.
bugs:
https://bugs.freedesktop.org/show_bug.cgi?id=73788https://bugs.freedesktop.org/show_bug.cgi?id=69395
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
cc: stable@vger.kernel.org
DCE5 and newer hardware only has 1 DAC. Use the correct
offset. This may fix display problems on certain board
configurations.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
If we are not able to properly initialize one of the gpu
engines for buffer paging, we limit vram to the size of
the cpu visible aperture. We generally either use the gfx
or dma engine to do this. Clean up the size limiting code
to only adjust the size based on what ring is selected
for buffer paging rather than making assumptions about which
engine is selected for paging.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
The hw is buggy and it's not currently used, but it's
currently still initialized by the driver. Skip the init.
Skipping init also seems to improve stability with dpm on
some r6xx asics.
bug:
https://bugs.freedesktop.org/show_bug.cgi?id=66963
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Prevent runtime suspend of non-PX GPUs. Runtime suspend is
not what we want in those cases.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Otherwise we allocate a new VMID on nearly every submit.
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Here's the vblank timestamp pull request you wanted.
I addressed the few bugs that Mario pointed out and added
the r-bs.
As it has been a while since I made the changes, I gave it a
quick spin on a few different i915 machines. Fortunately
everything still seems to be fine.
* 'drm-vbl-timestamp' of git://gitorious.org/vsyrjala/linux:
drm/i915: Add a kludge for DSL incrementing too late and ISR not working
drm/radeon: Move the early vblank IRQ fixup to radeon_get_crtc_scanoutpos()
drm: Pass 'flags' from the caller to .get_scanout_position()
drm: Fix vblank timestamping constants for interlaced modes
drm/i915: Fix scanoutpos calculations for interlaced modes
drm: Change {pixel,line,frame}dur_ns from s64 to int
drm: Use crtc_clock in drm_calc_timestamping_constants()
drm/radeon: Populate crtc_clock in radeon_atom_get_tv_timings()
drm: Simplify the math in drm_calc_timestamping_constants()
drm: Improve drm_calc_timestamping_constants() documentation
drm/i915: Call drm_calc_timestamping_constants() earlier
drm/i915: Kill hwmode save/restore
drm: Pass the display mode to drm_calc_vbltimestamp_from_scanoutpos()
drm: Pass the display mode to drm_calc_timestamping_constants()
It seems this got dropped when we merged UVD support
last year. Add this back now.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
We need to set the engine bit to select the ME and
also set the full cache bit. Should help stability
on TN and cayman.
V2: fix up surface sync in ib execute as well
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Mclk switching doesn't seem to work reliably on these
cards. Most RV770 boards specify the same mclk for all
performance levels anyway so in most cases, this has
no affect.
Bug:
https://bugs.freedesktop.org/show_bug.cgi?id=73067
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
If the ss percentage is 0 or we are using external ss,
just bail when enabling ss. We disable it explicitly
earlier in the modeset already.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is needed for reporting the max GPU engine clock
in OpenCL. This just reports the max possible engine
clock, it does not take into account current conditions
that may limit that clock.
v2: fix query number for merge with 3.13
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
According to the DP 1.1 spec, the sink must power
up within 1ms. Noticed while reviewing Thierry's
drm/dp patches.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As per the DP1.2 spec. Noticed while reviewing
Thierry's drm/dp patches. Also bump native aux
retries to 7 for consistency.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is the preferred flushing method on CIK.
Note, this only works on the PFP so the engine bit must be
set.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
i915 doesn't need this kludge for most platforms. Although we do
appear to need something similar on certain platforms, but we can
be more accurate when we apply the adjustment since we know exactly
why the scanline counter doesn't always quite match the vblank
status.
Also the current code doesn't handle interlaced modes correctly,
and we already deal with interlaced modes in i915 code.
So let's just move the current code to radeon_get_crtc_scanoutpos()
since that's why it was added. For i915 we'll add a more finely
targeted variant.
v2: Fix vpos vs. *vpos bug (Mario)
Reviewed-by: mario.kleiner.de@gmail.com
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Preparation for moving the early vblank IRQ logic into
radeon_get_crtc_scanoutpos().
v2: Fix radeon_drv.c compile warning (Mario)
Reviewed-by: mario.kleiner.de@gmail.com
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
crtc_clock is now supposed to be the actual pixel clock corresponding to
the other crtc_ timing values. Populate crtc_clock appropriately in
radeon_atom_get_tv_timings().
This was the only obvious place where we frob with the crtc_ timigns
directly instead of calling drm_mode_set_crtcinfo() which would also
update crtc_clock.
Reviewed-by: mario.kleiner.de@gmail.com
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Rather than using crtc->hwmode, just pass the relevant mode to
drm_calc_vbltimestamp_from_scanoutpos(). This removes the last hwmode
usage from core drm.
Reviewed-by: mario.kleiner.de@gmail.com
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
drm-intel-next-2014-01-10:
- final bits for runtime D3 on Haswell from Paul (now enabled fully)
- parse the backlight modulation freq information in the VBT from Jani
(but not yet used)
- more watermark improvements from Ville for ilk-ivb and bdw
- bugfixes for fastboot from Jesse
- watermark fix for i830M (but not yet everything)
- vlv vga hotplug w/a (Imre)
- piles of other small improvements, cleanups and fixes all over
Note that the pull request includes a backmerge of the last drm-fixes
pulled into Linus' tree - things where getting a bit too messy. So the
shortlog also contains a bunch of patches from Linus tree. Please yell if
you want me to frob it for you a bit.
* 'drm-intel-next' of git://people.freedesktop.org/~danvet/drm-intel: (609 commits)
drm/i915/bdw: make sure south port interrupts are enabled properly v2
drm/i915: Include more information in disabled hotplug interrupt warning
drm/i915: Only complain about a rogue hotplug IRQ after disabling
drm/i915: Only WARN about a stuck hotplug irq ONCE
drm/i915: s/hotplugt_status_gen4/hotplug_status_g4x/
pci config reset is a low level reset that resets
the entire chip from the bus interface. It can
be more reliable if soft reset fails.
v2: fix rebase
v3: hide behind module parameter
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
pci config reset is a low level reset that resets
the entire chip from the bus interface. It can
be more reliable if soft reset fails.
v2: hide behind module parameter
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
pci config reset is a low level reset that resets
the entire chip from the bus interface. It can
be more reliable if soft reset fails.
v2: put behind module parameter
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
pci config reset is a low level reset that resets
the entire chip from the bus interface. It can
be more reliable if soft reset fails.
There's not much information still available on
r6xx, so r6xx is based on guess-work.
v2: put behind module parameter
v3: add IGP check
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is used to hard reset the asic. If a soft
reset is not able to reset things, a hard reset
can be used.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enabling this parameter enables pci config reset,
aka hard reset, which is a bus level chip reset.
In some cases this works more reliably than a soft
reset. Disabled by default.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This fixes a bug which was causing rejections of valid GPU commands
from userspace.
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It's never allocated on systems without an ATOMBIOS or COMBIOS ROM.
Should fix an oops I encountered while resetting the GPU after a lockup
on my PowerBook with an RV350.
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Move prototype declarations of functions radeon_get_encoder_enum() and
radeon_link_encoder_connector() to header file drm/radeon/radeon_mode.h
because they are used by more than one file.
This eliminates the following warnings in drm/radeon/radeon_encoders.c:
drivers/gpu/drm/radeon/radeon_encoders.c:86:1: warning: no previous prototype for ‘radeon_get_encoder_enum’ [-Wmissing-prototypes]
drivers/gpu/drm/radeon/radeon_encoders.c:162:1: warning: no previous prototype for ‘radeon_link_encoder_connector’ [-Wmissing-prototypes]
Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move prototype declaration of functions radeon_add_atom_connector() and
radeon_add_legacy_connector() to header file drm/radeon/radeon_mode.h
because they are used by more than one file.
This eliminates the following warning in drm/radeon/radeon_connectors.c:
drivers/gpu/drm/radeon/radeon_connectors.c:1588:1: warning: no previous prototype for ‘radeon_add_atom_connector’ [-Wmissing-prototypes]
drivers/gpu/drm/radeon/radeon_connectors.c:2020:1: warning: no previous prototype for ‘radeon_add_legacy_connector’ [-Wmissing-prototypes]
Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
fixes warnings with -Wmissing-prototypes
Based on initial patches from Rashika Kheria.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Rashika Kheria <rashika.kheria@gmail.com>
Noticed by Rashika Kheria and cherry-picked from
her larger patch set.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Rashika Kheria <rashika.kheria@gmail.com>
