The code sets the default return code to -ENOSYS but then overrides this
to -EINVAL in the switch() statement's default case, which is clearly
silly.
This patch removes the override and sets the default return code to
-ENOTTY, which is the conventional return for an unimplemented ioctl.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Handling of multiple concurrent Xenstore accesses through xenbus driver
either from the kernel or user land is rather lame today: xenbus is
capable to have one access active only at one point of time.
Rewrite xenbus to handle multiple requests concurrently by making use
of the request id of the Xenstore protocol. This requires to:
- Instead of blocking inside xb_read() when trying to read data from
the xenstore ring buffer do so only in the main loop of
xenbus_thread().
- Instead of doing writes to the xenstore ring buffer in the context of
the caller just queue the request and do the write in the dedicated
xenbus thread.
- Instead of just forwarding the request id specified by the caller of
xenbus to xenstore use a xenbus internal unique request id. This will
allow multiple outstanding requests.
- Modify the locking scheme in order to allow multiple requests being
active in parallel.
- Instead of waiting for the reply of a user's xenstore request after
writing the request to the xenstore ring buffer return directly to
the caller and do the waiting in the read path.
Additionally signal handling was optimized by avoiding waking up the
xenbus thread or sending an event to Xenstore in case the addressed
entity is known to be running already.
As a result communication with Xenstore is sped up by a factor of up
to 5: depending on the request type (read or write) and the amount of
data transferred the gain was at least 20% (small reads) and went up to
a factor of 5 for large writes.
In the end some more rough edges of xenbus have been smoothed:
- Handling of memory shortage when reading from xenstore ring buffer in
the xenbus driver was not optimal: it was busy looping and issuing a
warning in each loop.
- In case of xenstore not running in dom0 but in a stubdom we end up
with two xenbus threads running as the initialization of xenbus in
dom0 expecting a local xenstored will be redone later when connecting
to the xenstore domain. Up to now this was no problem as locking
would prevent the two xenbus threads interfering with each other, but
this was just a waste of kernel resources.
- An out of memory situation while writing to or reading from the
xenstore ring buffer no longer will lead to a possible loss of
synchronization with xenstore.
- The user read and write part are now interruptible by signals.
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
The xenbus driver has an awful mixture of internally and globally
visible headers: some of the internally used only stuff is defined in
the global header include/xen/xenbus.h while some stuff defined in
internal headers is used by other drivers, too.
Clean this up by moving the externally used symbols to
include/xen/xenbus.h and the symbols used internally only to a new
header drivers/xen/xenbus/xenbus.h replacing xenbus_comms.h and
xenbus_probe.h
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
This function error patch can be simplified, so do so.
Remove fail: label and somewhat obfuscating, used once "error_path"
function.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Using native_machine_emergency_restart (called during reboot) will
lead PVH guests to machine_real_restart() where we try to use
real_mode_header which is not initialized.
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
PVH guests don't (yet) receive ACPI hotplug interrupts and therefore
need to monitor xenstore for CPU hotplug event.
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Like PV guests, PVH does not have PCI devices and therefore cannot
use MMIO space to store grants. Instead it balloons out memory and
keeps grants there.
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Since we are not using PIC and (at least currently) don't have IOAPIC
we want to make sure that acpi_irq_model doesn't stay set to
ACPI_IRQ_MODEL_PIC (which is the default value). If we allowed it to
stay then acpi_os_install_interrupt_handler() would try (and fail) to
request_irq() for PIC.
Instead we set the model to ACPI_IRQ_MODEL_PLATFORM which will prevent
this from happening.
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Start PVH guest at XEN_ELFNOTE_PHYS32_ENTRY address. Setup hypercall
page, initialize boot_params, enable early page tables.
Since this stub is executed before kernel entry point we cannot use
variables in .bss which is cleared by kernel. We explicitly place
variables that are initialized here into .data.
While adjusting xen_hvm_init_shared_info() make it use cpuid_e?x()
instead of cpuid() (wherever possible).
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
We are replacing existing PVH guests with new implementation.
We are keeping xen_pvh_domain() macro (for now set to zero) because
when we introduce new PVH implementation later in this series we will
reuse current PVH-specific code (xen_pvh_gnttab_setup()), and that
code is conditioned by 'if (xen_pvh_domain())'. (We will also need
a noop xen_pvh_domain() for !CONFIG_XEN_PVH).
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
The new Xen PVH entry point requires page tables to be setup by the
kernel since it is entered with paging disabled.
Pull the common code out of head_32.S so that mk_early_pgtbl_32() can be
invoked from both the new Xen entry point and the existing startup_32()
code.
Convert resulting common code to C.
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: matt@codeblueprint.co.uk
Cc: xen-devel@lists.xenproject.org
Link: http://lkml.kernel.org/r/1481215471-9639-1-git-send-email-boris.ostrovsky@oracle.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
A negative return value indicates an error; in fact the function at
present won't ever return zero.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
This patch fixes the following warning message seen when booting the
kernel as Dom0 with Xen on Intel machines.
[0.003000] [Firmware Bug]: CPU1: APIC id mismatch. Firmware: 0 APIC: 1]
The code generating the warning in validate_apic_and_package_id() matches
cpu_data(cpu).apicid (initialized in init_intel()->
detect_extended_topology() using cpuid) against the apicid returned from
xen_apic_read(). Now, xen_apic_read() makes a hypercall to retrieve apicid
for the boot cpu but returns 0 otherwise. Hence the warning gets thrown
for all but the boot cpu.
The idea behind xen_apic_read() returning 0 for apicid is that the
guests (even Dom0) should not need to know what physical processor their
vcpus are running on. This is because we currently do not have topology
information in Xen and also because xen allows more vcpus than physical
processors. However, boot cpu's apicid is required for loading
xen-acpi-processor driver on AMD machines. Look at following patch for
details:
commit 558daa289a ("xen/apic: Return the APIC ID (and version) for CPU
0.")
So to get rid of the warning, this patch modifies
xen_cpu_present_to_apicid() to return cpu_data(cpu).apicid instead of
calling xen_apic_read().
The warning is not seen on AMD machines because init_amd() populates
cpu_data(cpu).apicid by calling hard_smp_processor_id()->xen_apic_read()
as opposed to using apicid from cpuid as is done on Intel machines.
Signed-off-by: Mohit Gambhir <mohit.gambhir@oracle.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
The default for the maximum number of tx/rx queues of one interface is
the number of cpus of the system today. As each queue pair reserves 512
grant pages this default consumes a ridiculous number of grants for
large guests.
Limit the queue number to 8 as default. This value can be modified
via a module parameter if required.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
The default for the number of tx/rx queues of one interface is the
number of vcpus of the system today. As each queue pair reserves 512
grant pages this default consumes a ridiculous number of grants for
large guests.
Limit the queue number to 8 as default. This value can be modified
via a module parameter if required.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
I've seen this trigger twice now, where the i915_gem_object_to_ggtt()
call in intel_unpin_fb_obj() returns NULL, resulting in an oops
immediately afterwards as the (inlined) call to i915_vma_unpin_fence()
tries to dereference it.
It seems to be some race condition where the object is going away at
shutdown time, since both times happened when shutting down the X
server. The call chains were different:
- VT ioctl(KDSETMODE, KD_TEXT):
intel_cleanup_plane_fb+0x5b/0xa0 [i915]
drm_atomic_helper_cleanup_planes+0x6f/0x90 [drm_kms_helper]
intel_atomic_commit_tail+0x749/0xfe0 [i915]
intel_atomic_commit+0x3cb/0x4f0 [i915]
drm_atomic_commit+0x4b/0x50 [drm]
restore_fbdev_mode+0x14c/0x2a0 [drm_kms_helper]
drm_fb_helper_restore_fbdev_mode_unlocked+0x34/0x80 [drm_kms_helper]
drm_fb_helper_set_par+0x2d/0x60 [drm_kms_helper]
intel_fbdev_set_par+0x18/0x70 [i915]
fb_set_var+0x236/0x460
fbcon_blank+0x30f/0x350
do_unblank_screen+0xd2/0x1a0
vt_ioctl+0x507/0x12a0
tty_ioctl+0x355/0xc30
do_vfs_ioctl+0xa3/0x5e0
SyS_ioctl+0x79/0x90
entry_SYSCALL_64_fastpath+0x13/0x94
- i915 unpin_work workqueue:
intel_unpin_work_fn+0x58/0x140 [i915]
process_one_work+0x1f1/0x480
worker_thread+0x48/0x4d0
kthread+0x101/0x140
and this patch purely papers over the issue by adding a NULL pointer
check and a WARN_ON_ONCE() to avoid the oops that would then generally
make the machine unresponsive.
Other callers of i915_gem_object_to_ggtt() seem to also check for the
returned pointer being NULL and warn about it, so this clearly has
happened before in other places.
[ Reported it originally to the i915 developers on Jan 8, applying the
ugly workaround on my own now after triggering the problem for the
second time with no feedback.
This is likely to be the same bug reported as
https://bugs.freedesktop.org/show_bug.cgi?id=98829https://bugs.freedesktop.org/show_bug.cgi?id=99134
which has a patch for the underlying problem, but it hasn't gotten to
me, so I'm applying the workaround. ]
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull two parisc fixes from Helge Deller:
"One fix to avoid usage of BITS_PER_LONG in user-space exported swab.h
header which breaks compiling qemu, and one trivial fix for printk
continuation in the parisc parport driver"
* 'parisc-4.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Don't use BITS_PER_LONG in userspace-exported swab.h header
parisc, parport_gsc: Fixes for printk continuation lines
Pull i2c fixes from Wolfram Sang:
"Two I2C driver bugfixes.
The 'VLLS mode support' patch should have been entitled 'reconfigure
pinctrl after suspend' to make the bugfix more clear. Sorry, I missed
that, yet didn't want to rebase"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: imx-lpi2c: add VLLS mode support
i2c: i2c-cadence: Initialize configuration before probing devices
In swab.h the "#if BITS_PER_LONG > 32" breaks compiling userspace programs if
BITS_PER_LONG is #defined by userspace with the sizeof() compiler builtin.
Solve this problem by using __BITS_PER_LONG instead. Since we now
#include asm/bitsperlong.h avoid further potential userspace pollution
by moving the #define of SHIFT_PER_LONG to bitops.h which is not
exported to userspace.
This patch unbreaks compiling qemu on hppa/parisc.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org>
Stable patches:
- NFSv4.1: Fix a deadlock in layoutget
- NFSv4 must not bump sequence ids on NFS4ERR_MOVED errors
- NFSv4 Fix a regression with OPEN EXCLUSIVE4 mode
- Fix a memory leak when removing the SUNRPC module
Bugfixes:
- Fix a reference leak in _pnfs_return_layout
-----BEGIN PGP SIGNATURE-----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=S5qH
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-4.10-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client bugfixes from Trond Myklebust:
"Stable patches:
- NFSv4.1: Fix a deadlock in layoutget
- NFSv4 must not bump sequence ids on NFS4ERR_MOVED errors
- NFSv4 Fix a regression with OPEN EXCLUSIVE4 mode
- Fix a memory leak when removing the SUNRPC module
Bugfixes:
- Fix a reference leak in _pnfs_return_layout"
* tag 'nfs-for-4.10-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
pNFS: Fix a reference leak in _pnfs_return_layout
nfs: Fix "Don't increment lock sequence ID after NFS4ERR_MOVED"
SUNRPC: cleanup ida information when removing sunrpc module
NFSv4.0: always send mode in SETATTR after EXCLUSIVE4
nfs: Don't increment lock sequence ID after NFS4ERR_MOVED
NFSv4.1: Fix a deadlock in layoutget
Pull MD fixes from Shaohua Li:
"This fixes several corner cases for raid5 cache, which is merged into
this cycle"
* tag 'md/4.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md:
md/r5cache: disable write back for degraded array
md/r5cache: shift complex rmw from read path to write path
md/r5cache: flush data only stripes in r5l_recovery_log()
md/raid5: move comment of fetch_block to right location
md/r5cache: read data into orig_page for prexor of cached data
md/raid5-cache: delete meaningless code
is not currently handled
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=syme
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fix from Catalin Marinas:
"Fix kernel panic on ACPI-based systems where CPU capacity description
is not currently handled"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: skip register_cpufreq_notifier on ACPI-based systems
- Fix for unaligned access emulation corner case
- fix for udelay loop inline asm regression
- Fix irq affinity finally for AXS103 board [Yuriy]
- Final fixes for setting IO-coherency sanely in SMP
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=u+Jp
-----END PGP SIGNATURE-----
Merge tag 'arc-4.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc
Pull ARC fixes from Vineet Gupta:
"Hopefully last set of changes for ARC for 4.10:
- fix for unaligned access emulation corner case
- fix for udelay loop inline asm regression
- fix irq affinity finally for AXS103 board [Yuriy]
- final fixes for setting IO-coherency sanely in SMP"
* tag 'arc-4.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
ARC: [arcompact] handle unaligned access delay slot corner case
ARCv2: smp-boot: wake_flag polling by non-Masters needs to be uncached
ARC: smp-boot: Decouple Non masters waiting API from jump to entry point
ARCv2: MCIP: update the BCR per current changes
ARC: udelay: fix inline assembler by adding LP_COUNT to clobber list
ARCv2: MCIP: Deprecate setting of affinity in Device Tree
Pull networking fixes from David Miller:
1) GTP fixes from Andreas Schultz (missing genl module alias, clear IP
DF on transmit).
2) Netfilter needs to reflect the fwmark when sending resets, from Pau
Espin Pedrol.
3) nftable dump OOPS fix from Liping Zhang.
4) Fix erroneous setting of VIRTIO_NET_HDR_F_DATA_VALID on transmit,
from Rolf Neugebauer.
5) Fix build error of ipt_CLUSTERIP when procfs is disabled, from Arnd
Bergmann.
6) Fix regression in handling of NETIF_F_SG in harmonize_features(),
from Eric Dumazet.
7) Fix RTNL deadlock wrt. lwtunnel module loading, from David Ahern.
8) tcp_fastopen_create_child() needs to setup tp->max_window, from
Alexey Kodanev.
9) Missing kmemdup() failure check in ipv6 segment routing code, from
Eric Dumazet.
10) Don't execute unix_bind() under the bindlock, otherwise we deadlock
with splice. From WANG Cong.
11) ip6_tnl_parse_tlv_enc_lim() potentially reallocates the skb buffer,
therefore callers must reload cached header pointers into that skb.
Fix from Eric Dumazet.
12) Fix various bugs in legacy IRQ fallback handling in alx driver, from
Tobias Regnery.
13) Do not allow lwtunnel drivers to be unloaded while they are
referenced by active instances, from Robert Shearman.
14) Fix truncated PHY LED trigger names, from Geert Uytterhoeven.
15) Fix a few regressions from virtio_net XDP support, from John
Fastabend and Jakub Kicinski.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (102 commits)
ISDN: eicon: silence misleading array-bounds warning
net: phy: micrel: add support for KSZ8795
gtp: fix cross netns recv on gtp socket
gtp: clear DF bit on GTP packet tx
gtp: add genl family modules alias
tcp: don't annotate mark on control socket from tcp_v6_send_response()
ravb: unmap descriptors when freeing rings
virtio_net: reject XDP programs using header adjustment
virtio_net: use dev_kfree_skb for small buffer XDP receive
r8152: check rx after napi is enabled
r8152: re-schedule napi for tx
r8152: avoid start_xmit to schedule napi when napi is disabled
r8152: avoid start_xmit to call napi_schedule during autosuspend
net: dsa: Bring back device detaching in dsa_slave_suspend()
net: phy: leds: Fix truncated LED trigger names
net: phy: leds: Break dependency of phy.h on phy_led_triggers.h
net: phy: leds: Clear phy_num_led_triggers on failure to avoid crash
net-next: ethernet: mediatek: change the compatible string
Documentation: devicetree: change the mediatek ethernet compatible string
bnxt_en: Fix RTNL lock usage on bnxt_get_port_module_status().
...
- Fix race conditions in the CoW code
- Fix some incorrect input validation checks
- Avoid crashing fs by running out of space when freeing inodes
- Fix toctou race wrt whether or not an inode has an attr
- Fix build error on arm
- Fix page refcount corruption when readahead fails
- Don't corrupt userspace in the bmap ioctl
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABCgAGBQJYi4RJAAoJEPh/dxk0SrTrsU4QAIZBUUSpvpwggyfbTcOb6QWb
F/vBoj50f+cxZB2jxLrch4aRsvlhW6IkRnsKiciG4cQaDbjPbjhSMH4JEUUqrPvG
TRTcBvT6rEbxnB3adIH2DVrDAaEEVpRSkPaV/vLjYEfJp8Nyv8yXb6U8zH//NeZQ
Pwrwe0RX0bJRyAEBIRwBnTayMP6xIccCE9Ml7+sMG/UVnb0Fa8t5zg/9igfd0MrB
xf3MdkW0fpFCcp1Bbby8cnDmTjjxEtB6OApL82UnSZ7l2/U5AHhiA0NgHreYuzt8
47ezqEQfk+IWK5LY1c6V/vARKhVvM738jS2dG1tsFhnbTbq9yXA2yiCMdA+sKB7+
wlRIuTq7tuhN4Lk/9eheXHR4xHKDbOKY+zWEWi/AlFRaWmld0otMykVC6wbp6soo
1gYgbaCjJcJcResKYAdby92jqvIRONqknpUF2L0jOiGIPgz8rmjA6BIvymjaXEuO
4MLfSjeVP4Ip2tDcaa0R3dSQ40lP778UQNiuqcKb1WODx1AyljJB+gemK0jE8kwN
OEY7IBSs+wP/UBYN+XbYhoIGlJ4ckwyhIctl4bMvVOduQ40uASlyQS6hmqng5Df/
NIFd+fCwuBCa45mwUJ2LPTzx3WndMyLv30z/ladtshV+WlUbu60yTzT4bIiQDcpZ
CYALhDjBiCHzrs6rIhxW
=Co7t
-----END PGP SIGNATURE-----
Merge tag 'xfs-for-linus-4.10-rc6-5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs uodates from Darrick Wong:
"I have some more fixes this week: better input validation, corruption
avoidance, build fixes, memory leak fixes, and a couple from Christoph
to avoid an ENOSPC failure.
Summary:
- Fix race conditions in the CoW code
- Fix some incorrect input validation checks
- Avoid crashing fs by running out of space when freeing inodes
- Fix toctou race wrt whether or not an inode has an attr
- Fix build error on arm
- Fix page refcount corruption when readahead fails
- Don't corrupt userspace in the bmap ioctl"
* tag 'xfs-for-linus-4.10-rc6-5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: prevent quotacheck from overloading inode lru
xfs: fix bmv_count confusion w/ shared extents
xfs: clear _XBF_PAGES from buffers when readahead page
xfs: extsize hints are not unlikely in xfs_bmap_btalloc
xfs: remove racy hasattr check from attr ops
xfs: use per-AG reservations for the finobt
xfs: only update mount/resv fields on success in __xfs_ag_resv_init
xfs: verify dirblocklog correctly
xfs: fix COW writeback race
Pull btrfs updates from Chris Mason:
"Some fixes that we've collected from the list.
We still have one more pending to nail down a regression in lzo
compression, but I wanted to get this batch out the door"
* 'for-linus-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: remove ->{get, set}_acl() from btrfs_dir_ro_inode_operations
Btrfs: disable xattr operations on subvolume directories
Btrfs: remove old tree_root case in btrfs_read_locked_inode()
Btrfs: fix truncate down when no_holes feature is enabled
Btrfs: Fix deadlock between direct IO and fast fsync
btrfs: fix false enospc error when truncating heavily reflinked file
Pull block fixes from Jens Axboe:
"A set of fixes for this series. This contains:
- Set of fixes for the nvme target code
- A revert of patch from this merge window, causing a regression with
WRITE_SAME on iSCSI targets at least.
- A fix for a use-after-free in the new O_DIRECT bdev code.
- Two fixes for the xen-blkfront driver"
* 'for-linus' of git://git.kernel.dk/linux-block:
Revert "sd: remove __data_len hack for WRITE SAME"
nvme-fc: use blk_rq_nr_phys_segments
nvmet-rdma: Fix missing dma sync to nvme data structures
nvmet: Call fatal_error from keep-alive timout expiration
nvmet: cancel fatal error and flush async work before free controller
nvmet: delete controllers deletion upon subsystem release
nvmet_fc: correct logic in disconnect queue LS handling
block: fix use after free in __blkdev_direct_IO
xen-blkfront: correct maximum segment accounting
xen-blkfront: feature flags handling adjustments
- Series of iw_cxgb4 fixes to make it work with the drain cq API
- One or two patches each to: srp, iser, cxgb3, vmw_pvrdma, umem, rxe,
and ipoib
- One big series (13 patches) for the new qedr driver
-----BEGIN PGP SIGNATURE-----
iQIcBAABAgAGBQJYi6KyAAoJELgmozMOVy/d9wgP+gN1i3pEvXN+yy8JmQb/kYDT
9k74tbrPY/E3FnxqfWhqIWWSU427/+wXq7phqFxc/w9BNB3by7Ivud1FuHpBWfx5
PoEhQj+TA3gQEHk259+Jdz8OHLMrKEME3zg1tuDUM9vq+e9hfZWyRVXcTFuOZTKg
YoKBpAE4AmSyKCcogn0FNHkm7UxlSZGlIfiVA61I1vPYjV0Z/ePkiXg51Y3RNOUy
x8StD+RVfWHWJTZ7ZKASC26Mm9tLzQxENQ0kJXg24oG0CaAO90iO3oFUM86z5NP8
gFyvdCpsgDSByRtoLhPnUvSmoTTzcLPa65YneINu17MeKiKjZaVmZipwr54pNTw0
++mqnfuEYhOUzjN1naDaK3DihEAj7CoW9Gdx84s9hOggOyURFUrV7DqwJSEBAz02
9VxBWpKsR7NKF7xVdy/oTgoWpO8Nr7DuYyHklaxS6eORci7CD3lqs71uf1XJg48t
b9SfncPxHReC4L6Y9sAUZsseaLsSCy/3bestB5wTqL6iRxjp25fJ7EvK9VLW/gXl
FcRU5pzph1pKDAasb/M8CjUnS4f4LveenALKAcNViuZDh8WEimM/Jlfg5vHbUAr8
rc0z9s/0cgU9AL/ZPaWQb57ZivaS0pXXa1z+ykKvSvj7nYRAX2tsYLzaX8Im2ang
8Rqqy93AdiO4Zq8ypnCq
=d5rm
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma
Pull rdma fixes from Doug Ledford:
"Second round of -rc fixes for 4.10.
This -rc cycle has been slow for the rdma subsystem. I had already
sent you the first batch before the Holiday break. After that, we kept
only getting a few here or there. Up until this week, when I got a
drop of 13 to one driver (qedr). So, here's the -rc patches I have. I
currently have none held in reserve, so unless something new comes in,
this is it until the next merge window opens.
Summary:
- series of iw_cxgb4 fixes to make it work with the drain cq API
- one or two patches each to: srp, iser, cxgb3, vmw_pvrdma, umem,
rxe, and ipoib
- one big series (13 patches) for the new qedr driver"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (27 commits)
RDMA/cma: Fix unknown symbol when CONFIG_IPV6 is not enabled
IB/rxe: Prevent from completer to operate on non valid QP
IB/rxe: Fix rxe dev insertion to rxe_dev_list
IB/umem: Release pid in error and ODP flow
RDMA/qedr: Dispatch port active event from qedr_add
RDMA/qedr: Fix and simplify memory leak in PD alloc
RDMA/qedr: Fix RDMA CM loopback
RDMA/qedr: Fix formatting
RDMA/qedr: Mark three functions as static
RDMA/qedr: Don't reset QP when queues aren't flushed
RDMA/qedr: Don't spam dmesg if QP is in error state
RDMA/qedr: Remove CQ spinlock from CM completion handlers
RDMA/qedr: Return max inline data in QP query result
RDMA/qedr: Return success when not changing QP state
RDMA/qedr: Add uapi header qedr-abi.h
RDMA/qedr: Fix MTU returned from QP query
RDMA/core: Add the function ib_mtu_int_to_enum
IB/vmw_pvrdma: Fix incorrect cleanup on pvrdma_pci_probe error path
IB/vmw_pvrdma: Don't leak info from alloc_ucontext
IB/cxgb3: fix misspelling in header guard
...
Pull s390 fixes from Martin Schwidefsky:
"Another two bug fixes:
- ptrace partial write information leak
- a guest page hinting regression introduced with v4.6"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/mm: Fix cmma unused transfer from pgste into pte
s390/ptrace: Preserve previous registers for short regset write
Pull swiotlb fix from Konrad Rzeszutek Wilk:
"An ARM fix in the Xen SWIOTLB - mainly the translation of physical to
bus addresses was done just a tad too late"
* 'stable/for-linus-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb:
swiotlb-xen: update dev_addr after swapping pages
- mdev IOMMU groups are not yet compatible with the powerpc SPAPR
IOMMU backend, detect and fail group attach (Greg Kurz)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.14 (GNU/Linux)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=h4To
-----END PGP SIGNATURE-----
Merge tag 'vfio-v4.10-rc6' of git://github.com/awilliam/linux-vfio
Pull VFIO fix from Alex Williamson:
"mdev IOMMU groups are not yet compatible with the powerpc SPAPR IOMMU
backend, detect and fail group attach (Greg Kurz)"
* tag 'vfio-v4.10-rc6' of git://github.com/awilliam/linux-vfio:
vfio/spapr: fail tce_iommu_attach_group() when iommu_data is null
If IPV6 has not been enabled in the underlying kernel, we must avoid
calling IPV6 procedures in rdma_cm.ko.
This requires using "IS_ENABLED(CONFIG_IPV6)" in "if" statements
surrounding any code which calls external IPV6 procedures.
In the instance fixed here, procedure cma_bind_addr() called
ipv6_addr_type() -- which resulted in calling external procedure
__ipv6_addr_type().
Fixes: 6c26a77124 ("RDMA/cma: fix IPv6 address resolution")
Cc: <stable@vger.kernel.org> # v4.2+
Cc: Spencer Baugh <sbaugh@catern.com>
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Reviewed-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Konrad writes:
Please pull in your 'for-linus' branch two little fixes for Xen
block front:
One fix is for handling the XEN_PAGE_SIZE != PAGE_SIZE (4KB vs 64KB
on ARM for example) mishandling while the other is fixing
the accounting for the configuration changes.
After emulating an unaligned access in delay slot of a branch, we
pretend as the delay slot never happened - so return back to actual
branch target (or next PC if branch was not taken).
Curently we did this by handling STATUS32.DE, we also need to clear the
BTA.T bit, which is disregarded when returning from original misaligned
exception, but could cause weirdness if it took the interrupt return
path (in case interrupt was acive too)
One ARC700 customer ran into this when enabling unaligned access fixup
for kernel mode accesses as well
Cc: stable@vger.kernel.org
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
-----BEGIN PGP SIGNATURE-----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=r51U
-----END PGP SIGNATURE-----
Merge tag 'media/v4.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
- fix a regression on tvp5150 causing failures at input selection and
image glitches
- CEC was moved out of staging for v4.10. Fix some bugs on it while not
too late
- fix a regression on pctv452e caused by VM stack changes
- fix suspend issued with smiapp
- fix a regression on cobalt driver
- fix some warnings and Kconfig issues with some random configs.
* tag 'media/v4.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
[media] s5k4ecgx: select CRC32 helper
[media] dvb: avoid warning in dvb_net
[media] v4l: tvp5150: Don't override output pinmuxing at stream on/off time
[media] v4l: tvp5150: Fix comment regarding output pin muxing
[media] v4l: tvp5150: Reset device at probe time, not in get/set format handlers
[media] pctv452e: move buffer to heap, no mutex
[media] media/cobalt: use pci_irq_allocate_vectors
[media] cec: fix race between configuring and unconfiguring
[media] cec: move cec_report_phys_addr into cec_config_thread_func
[media] cec: replace cec_report_features by cec_fill_msg_report_features
[media] cec: update log_addr[] before finishing configuration
[media] cec: CEC_MSG_GIVE_FEATURES should abort for CEC version < 2
[media] cec: when canceling a message, don't overwrite old status info
[media] cec: fix report_current_latency
[media] smiapp: Make suspend and resume functions __maybe_unused
[media] smiapp: Implement power-on and power-off sequences without runtime PM
Pull thermal management fix from Zhang Rui:
"A single revert from a recently introduced problem.
Specifics:
Commit 7611fb6806 ("thermal: thermal_hwmon: Convert to
hwmon_device_register_with_info()"), which was introduced in 4.10-rc5,
uses new hwmon API. But this breaks some soc thermal driver because
the new hwmon API has a strict rule for the hwmon device name. Revert
the offending commit as a quick solution for 4.10"
* 'for-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux:
Revert "thermal: thermal_hwmon: Convert to hwmon_device_register_with_info()"
Quotacheck runs at mount time in situations where quota accounting must
be recalculated. In doing so, it uses bulkstat to visit every inode in
the filesystem. Historically, every inode processed during quotacheck
was released and immediately tagged for reclaim because quotacheck runs
before the superblock is marked active by the VFS. In other words,
the final iput() lead to an immediate ->destroy_inode() call, which
allowed the XFS background reclaim worker to start reclaiming inodes.
Commit 17c12bcd3 ("xfs: when replaying bmap operations, don't let
unlinked inodes get reaped") marks the XFS superblock active sooner as
part of the mount process to support caching inodes processed during log
recovery. This occurs before quotacheck and thus means all inodes
processed by quotacheck are inserted to the LRU on release. The
s_umount lock is held until the mount has completed and thus prevents
the shrinkers from operating on the sb. This means that quotacheck can
excessively populate the inode LRU and lead to OOM conditions on systems
without sufficient RAM.
Update the quotacheck bulkstat handler to set XFS_IGET_DONTCACHE on
inodes processed by quotacheck. This causes ->drop_inode() to return 1
and in turn causes iput_final() to evict the inode. This preserves the
original quotacheck behavior and prevents it from overloading the LRU
and running out of memory.
CC: stable@vger.kernel.org # v4.9
Reported-by: Martin Svec <martin.svec@zoner.cz>
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
With some gcc versions, we get a warning about the eicon driver,
and that currently shows up as the only remaining warning in one
of the build bots:
In file included from ../drivers/isdn/hardware/eicon/message.c:30:0:
eicon/message.c: In function 'mixer_notify_update':
eicon/platform.h:333:18: warning: array subscript is above array bounds [-Warray-bounds]
The code is easily changed to open-code the unusual PUT_WORD() line
causing this to avoid the warning.
Cc: stable@vger.kernel.org
Link: http://arm-soc.lixom.net/buildlogs/stable-rc/v4.4.45/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is adds support for the PHYs in the KSZ8795 5port managed switch.
It will allow to detect the link between the switch and the soc
and uses the same read_status functions as the KSZ8873MLL switch.
Signed-off-by: Sean Nyekjaer <sean.nyekjaer@prevas.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Andreas Schultz says:
====================
various gtp fixes
I'm sorry for the compile error mess up in the last version.
It's no excuse for not test compiling, but the hunks got lost in
a rebase.
This is the part of the previous "simple gtp improvements" series
that Pablo indicated should go into net.
The addition of the module alias fixes genl family autoloading,
clearing the DF bit fixes a protocol violation in regard to the
specification and the netns comparison fixes a corner case of
cross netns recv.
v2->v3: fix compiler error introduced in rebase
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The use of the passed through netlink src_net to check for a
cross netns operation was wrong. Using the GTP socket and the
GTP netdevice is always correct (even if the netdev has been
moved to new netns after link creation).
Remove the now obsolete net field from gtp_dev.
Signed-off-by: Andreas Schultz <aschultz@tpip.net>
Acked-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
3GPP TS 29.281 and 3GPP TS 29.060 imply that GTP-U packets should be
sent with the DF bit cleared. For example 3GPP TS 29.060, Release 8,
Section 13.2.2:
> Backbone router: Any router in the backbone may fragment the GTP
> packet if needed, according to IPv4.
Signed-off-by: Andreas Schultz <aschultz@tpip.net>
Acked-by: Harald Welte <laforge@netfilter.org>
Acked-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Auto-load the module when userspace asks for the gtp netlink
family.
Signed-off-by: Andreas Schultz <aschultz@tpip.net>
Acked-by: Harald Welte <laforge@netfilter.org>
Acked-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Unlike ipv4, this control socket is shared by all cpus so we cannot use
it as scratchpad area to annotate the mark that we pass to ip6_xmit().
Add a new parameter to ip6_xmit() to indicate the mark. The SCTP socket
family caches the flowi6 structure in the sctp_transport structure, so
we cannot use to carry the mark unless we later on reset it back, which
I discarded since it looks ugly to me.
Fixes: bf99b4ded5 ("tcp: fix mark propagation with fwmark_reflect enabled")
Suggested-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
