2005-04-16 16:20:36 -06:00
|
|
|
/************************************************************************
|
|
|
|
* s2io.c: A Linux PCI-X Ethernet driver for S2IO 10GbE Server NIC
|
|
|
|
* Copyright(c) 2002-2005 Neterion Inc.
|
|
|
|
|
|
|
|
* This software may be used and distributed according to the terms of
|
|
|
|
* the GNU General Public License (GPL), incorporated herein by reference.
|
|
|
|
* Drivers based on or derived from this code fall under the GPL and must
|
|
|
|
* retain the authorship, copyright and license notice. This file is not
|
|
|
|
* a complete program and may only be used when the entire operating
|
|
|
|
* system is licensed under the GPL.
|
|
|
|
* See the file COPYING in this distribution for more information.
|
|
|
|
*
|
|
|
|
* Credits:
|
2005-08-03 13:24:33 -06:00
|
|
|
* Jeff Garzik : For pointing out the improper error condition
|
|
|
|
* check in the s2io_xmit routine and also some
|
|
|
|
* issues in the Tx watch dog function. Also for
|
|
|
|
* patiently answering all those innumerable
|
2005-04-16 16:20:36 -06:00
|
|
|
* questions regaring the 2.6 porting issues.
|
|
|
|
* Stephen Hemminger : Providing proper 2.6 porting mechanism for some
|
|
|
|
* macros available only in 2.6 Kernel.
|
2005-08-03 13:24:33 -06:00
|
|
|
* Francois Romieu : For pointing out all code part that were
|
2005-04-16 16:20:36 -06:00
|
|
|
* deprecated and also styling related comments.
|
2005-08-03 13:24:33 -06:00
|
|
|
* Grant Grundler : For helping me get rid of some Architecture
|
2005-04-16 16:20:36 -06:00
|
|
|
* dependent code.
|
|
|
|
* Christopher Hellwig : Some more 2.6 specific issues in the driver.
|
2005-08-03 13:24:33 -06:00
|
|
|
*
|
2005-04-16 16:20:36 -06:00
|
|
|
* The module loadable parameters that are supported by the driver and a brief
|
|
|
|
* explaination of all the variables.
|
2005-08-03 13:24:33 -06:00
|
|
|
* rx_ring_num : This can be used to program the number of receive rings used
|
|
|
|
* in the driver.
|
|
|
|
* rx_ring_len: This defines the number of descriptors each ring can have. This
|
2005-04-16 16:20:36 -06:00
|
|
|
* is also an array of size 8.
|
|
|
|
* tx_fifo_num: This defines the number of Tx FIFOs thats used int the driver.
|
2005-08-03 13:24:33 -06:00
|
|
|
* tx_fifo_len: This too is an array of 8. Each element defines the number of
|
2005-04-16 16:20:36 -06:00
|
|
|
* Tx descriptors that can be associated with each corresponding FIFO.
|
|
|
|
************************************************************************/
|
|
|
|
|
|
|
|
#include <linux/config.h>
|
|
|
|
#include <linux/module.h>
|
|
|
|
#include <linux/types.h>
|
|
|
|
#include <linux/errno.h>
|
|
|
|
#include <linux/ioport.h>
|
|
|
|
#include <linux/pci.h>
|
2005-06-26 16:22:14 -06:00
|
|
|
#include <linux/dma-mapping.h>
|
2005-04-16 16:20:36 -06:00
|
|
|
#include <linux/kernel.h>
|
|
|
|
#include <linux/netdevice.h>
|
|
|
|
#include <linux/etherdevice.h>
|
|
|
|
#include <linux/skbuff.h>
|
|
|
|
#include <linux/init.h>
|
|
|
|
#include <linux/delay.h>
|
|
|
|
#include <linux/stddef.h>
|
|
|
|
#include <linux/ioctl.h>
|
|
|
|
#include <linux/timex.h>
|
|
|
|
#include <linux/sched.h>
|
|
|
|
#include <linux/ethtool.h>
|
|
|
|
#include <linux/version.h>
|
|
|
|
#include <linux/workqueue.h>
|
2005-08-03 13:35:55 -06:00
|
|
|
#include <linux/if_vlan.h>
|
2005-04-16 16:20:36 -06:00
|
|
|
|
|
|
|
#include <asm/system.h>
|
|
|
|
#include <asm/uaccess.h>
|
2005-08-03 13:24:33 -06:00
|
|
|
#include <asm/io.h>
|
2005-04-16 16:20:36 -06:00
|
|
|
|
|
|
|
/* local include */
|
|
|
|
#include "s2io.h"
|
|
|
|
#include "s2io-regs.h"
|
|
|
|
|
|
|
|
/* S2io Driver name & version. */
|
2005-08-03 13:24:33 -06:00
|
|
|
static char s2io_driver_name[] = "Neterion";
|
|
|
|
static char s2io_driver_version[] = "Version 1.7.7";
|
2005-04-16 16:20:36 -06:00
|
|
|
|
2005-08-03 13:27:09 -06:00
|
|
|
static inline int RXD_IS_UP2DT(RxD_t *rxdp)
|
|
|
|
{
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
ret = ((!(rxdp->Control_1 & RXD_OWN_XENA)) &&
|
|
|
|
(GET_RXD_MARKER(rxdp->Control_2) != THE_RXD_MARK));
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
2005-08-03 13:24:33 -06:00
|
|
|
/*
|
2005-04-16 16:20:36 -06:00
|
|
|
* Cards with following subsystem_id have a link state indication
|
|
|
|
* problem, 600B, 600C, 600D, 640B, 640C and 640D.
|
|
|
|
* macro below identifies these cards given the subsystem_id.
|
|
|
|
*/
|
|
|
|
#define CARDS_WITH_FAULTY_LINK_INDICATORS(subid) \
|
|
|
|
(((subid >= 0x600B) && (subid <= 0x600D)) || \
|
|
|
|
((subid >= 0x640B) && (subid <= 0x640D))) ? 1 : 0
|
|
|
|
|
|
|
|
#define LINK_IS_UP(val64) (!(val64 & (ADAPTER_STATUS_RMAC_REMOTE_FAULT | \
|
|
|
|
ADAPTER_STATUS_RMAC_LOCAL_FAULT)))
|
|
|
|
#define TASKLET_IN_USE test_and_set_bit(0, (&sp->tasklet_status))
|
|
|
|
#define PANIC 1
|
|
|
|
#define LOW 2
|
|
|
|
static inline int rx_buffer_level(nic_t * sp, int rxb_size, int ring)
|
|
|
|
{
|
|
|
|
int level = 0;
|
2005-08-03 13:24:33 -06:00
|
|
|
mac_info_t *mac_control;
|
|
|
|
|
|
|
|
mac_control = &sp->mac_control;
|
|
|
|
if ((mac_control->rings[ring].pkt_cnt - rxb_size) > 16) {
|
2005-04-16 16:20:36 -06:00
|
|
|
level = LOW;
|
2005-08-03 13:32:00 -06:00
|
|
|
if (rxb_size <= MAX_RXDS_PER_BLOCK) {
|
2005-04-16 16:20:36 -06:00
|
|
|
level = PANIC;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
return level;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Ethtool related variables and Macros. */
|
|
|
|
static char s2io_gstrings[][ETH_GSTRING_LEN] = {
|
|
|
|
"Register test\t(offline)",
|
|
|
|
"Eeprom test\t(offline)",
|
|
|
|
"Link test\t(online)",
|
|
|
|
"RLDRAM test\t(offline)",
|
|
|
|
"BIST Test\t(offline)"
|
|
|
|
};
|
|
|
|
|
|
|
|
static char ethtool_stats_keys[][ETH_GSTRING_LEN] = {
|
|
|
|
{"tmac_frms"},
|
|
|
|
{"tmac_data_octets"},
|
|
|
|
{"tmac_drop_frms"},
|
|
|
|
{"tmac_mcst_frms"},
|
|
|
|
{"tmac_bcst_frms"},
|
|
|
|
{"tmac_pause_ctrl_frms"},
|
|
|
|
{"tmac_any_err_frms"},
|
|
|
|
{"tmac_vld_ip_octets"},
|
|
|
|
{"tmac_vld_ip"},
|
|
|
|
{"tmac_drop_ip"},
|
|
|
|
{"tmac_icmp"},
|
|
|
|
{"tmac_rst_tcp"},
|
|
|
|
{"tmac_tcp"},
|
|
|
|
{"tmac_udp"},
|
|
|
|
{"rmac_vld_frms"},
|
|
|
|
{"rmac_data_octets"},
|
|
|
|
{"rmac_fcs_err_frms"},
|
|
|
|
{"rmac_drop_frms"},
|
|
|
|
{"rmac_vld_mcst_frms"},
|
|
|
|
{"rmac_vld_bcst_frms"},
|
|
|
|
{"rmac_in_rng_len_err_frms"},
|
|
|
|
{"rmac_long_frms"},
|
|
|
|
{"rmac_pause_ctrl_frms"},
|
|
|
|
{"rmac_discarded_frms"},
|
|
|
|
{"rmac_usized_frms"},
|
|
|
|
{"rmac_osized_frms"},
|
|
|
|
{"rmac_frag_frms"},
|
|
|
|
{"rmac_jabber_frms"},
|
|
|
|
{"rmac_ip"},
|
|
|
|
{"rmac_ip_octets"},
|
|
|
|
{"rmac_hdr_err_ip"},
|
|
|
|
{"rmac_drop_ip"},
|
|
|
|
{"rmac_icmp"},
|
|
|
|
{"rmac_tcp"},
|
|
|
|
{"rmac_udp"},
|
|
|
|
{"rmac_err_drp_udp"},
|
|
|
|
{"rmac_pause_cnt"},
|
|
|
|
{"rmac_accepted_ip"},
|
|
|
|
{"rmac_err_tcp"},
|
2005-08-03 13:29:20 -06:00
|
|
|
{"\n DRIVER STATISTICS"},
|
|
|
|
{"single_bit_ecc_errs"},
|
|
|
|
{"double_bit_ecc_errs"},
|
2005-04-16 16:20:36 -06:00
|
|
|
};
|
|
|
|
|
|
|
|
#define S2IO_STAT_LEN sizeof(ethtool_stats_keys)/ ETH_GSTRING_LEN
|
|
|
|
#define S2IO_STAT_STRINGS_LEN S2IO_STAT_LEN * ETH_GSTRING_LEN
|
|
|
|
|
|
|
|
#define S2IO_TEST_LEN sizeof(s2io_gstrings) / ETH_GSTRING_LEN
|
|
|
|
#define S2IO_STRINGS_LEN S2IO_TEST_LEN * ETH_GSTRING_LEN
|
|
|
|
|
2005-08-03 13:34:11 -06:00
|
|
|
#define S2IO_TIMER_CONF(timer, handle, arg, exp) \
|
|
|
|
init_timer(&timer); \
|
|
|
|
timer.function = handle; \
|
|
|
|
timer.data = (unsigned long) arg; \
|
|
|
|
mod_timer(&timer, (jiffies + exp)) \
|
|
|
|
|
2005-08-03 13:35:55 -06:00
|
|
|
/* Add the vlan */
|
|
|
|
static void s2io_vlan_rx_register(struct net_device *dev,
|
|
|
|
struct vlan_group *grp)
|
|
|
|
{
|
|
|
|
nic_t *nic = dev->priv;
|
|
|
|
unsigned long flags;
|
|
|
|
|
|
|
|
spin_lock_irqsave(&nic->tx_lock, flags);
|
|
|
|
nic->vlgrp = grp;
|
|
|
|
spin_unlock_irqrestore(&nic->tx_lock, flags);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Unregister the vlan */
|
|
|
|
static void s2io_vlan_rx_kill_vid(struct net_device *dev, unsigned long vid)
|
|
|
|
{
|
|
|
|
nic_t *nic = dev->priv;
|
|
|
|
unsigned long flags;
|
|
|
|
|
|
|
|
spin_lock_irqsave(&nic->tx_lock, flags);
|
|
|
|
if (nic->vlgrp)
|
|
|
|
nic->vlgrp->vlan_devices[vid] = NULL;
|
|
|
|
spin_unlock_irqrestore(&nic->tx_lock, flags);
|
|
|
|
}
|
|
|
|
|
2005-08-03 13:24:33 -06:00
|
|
|
/*
|
2005-04-16 16:20:36 -06:00
|
|
|
* Constants to be programmed into the Xena's registers, to configure
|
|
|
|
* the XAUI.
|
|
|
|
*/
|
|
|
|
|
|
|
|
#define SWITCH_SIGN 0xA5A5A5A5A5A5A5A5ULL
|
|
|
|
#define END_SIGN 0x0
|
|
|
|
|
|
|
|
static u64 default_mdio_cfg[] = {
|
|
|
|
/* Reset PMA PLL */
|
|
|
|
0xC001010000000000ULL, 0xC0010100000000E0ULL,
|
|
|
|
0xC0010100008000E4ULL,
|
|
|
|
/* Remove Reset from PMA PLL */
|
|
|
|
0xC001010000000000ULL, 0xC0010100000000E0ULL,
|
|
|
|
0xC0010100000000E4ULL,
|
|
|
|
END_SIGN
|
|
|
|
};
|
|
|
|
|
|
|
|
static u64 default_dtx_cfg[] = {
|
|
|
|
0x8000051500000000ULL, 0x80000515000000E0ULL,
|
|
|
|
0x80000515D93500E4ULL, 0x8001051500000000ULL,
|
|
|
|
0x80010515000000E0ULL, 0x80010515001E00E4ULL,
|
|
|
|
0x8002051500000000ULL, 0x80020515000000E0ULL,
|
|
|
|
0x80020515F21000E4ULL,
|
|
|
|
/* Set PADLOOPBACKN */
|
|
|
|
0x8002051500000000ULL, 0x80020515000000E0ULL,
|
|
|
|
0x80020515B20000E4ULL, 0x8003051500000000ULL,
|
|
|
|
0x80030515000000E0ULL, 0x80030515B20000E4ULL,
|
|
|
|
0x8004051500000000ULL, 0x80040515000000E0ULL,
|
|
|
|
0x80040515B20000E4ULL, 0x8005051500000000ULL,
|
|
|
|
0x80050515000000E0ULL, 0x80050515B20000E4ULL,
|
|
|
|
SWITCH_SIGN,
|
|
|
|
/* Remove PADLOOPBACKN */
|
|
|
|
0x8002051500000000ULL, 0x80020515000000E0ULL,
|
|
|
|
0x80020515F20000E4ULL, 0x8003051500000000ULL,
|
|
|
|
0x80030515000000E0ULL, 0x80030515F20000E4ULL,
|
|
|
|
0x8004051500000000ULL, 0x80040515000000E0ULL,
|
|
|
|
0x80040515F20000E4ULL, 0x8005051500000000ULL,
|
|
|
|
0x80050515000000E0ULL, 0x80050515F20000E4ULL,
|
|
|
|
END_SIGN
|
|
|
|
};
|
|
|
|
|
2005-08-03 13:24:33 -06:00
|
|
|
/*
|
2005-04-16 16:20:36 -06:00
|
|
|
* Constants for Fixing the MacAddress problem seen mostly on
|
|
|
|
* Alpha machines.
|
|
|
|
*/
|
|
|
|
static u64 fix_mac[] = {
|
|
|
|
0x0060000000000000ULL, 0x0060600000000000ULL,
|
|
|
|
0x0040600000000000ULL, 0x0000600000000000ULL,
|
|
|
|
0x0020600000000000ULL, 0x0060600000000000ULL,
|
|
|
|
0x0020600000000000ULL, 0x0060600000000000ULL,
|
|
|
|
0x0020600000000000ULL, 0x0060600000000000ULL,
|
|
|
|
0x0020600000000000ULL, 0x0060600000000000ULL,
|
|
|
|
0x0020600000000000ULL, 0x0060600000000000ULL,
|
|
|
|
0x0020600000000000ULL, 0x0060600000000000ULL,
|
|
|
|
0x0020600000000000ULL, 0x0060600000000000ULL,
|
|
|
|
0x0020600000000000ULL, 0x0060600000000000ULL,
|
|
|
|
0x0020600000000000ULL, 0x0060600000000000ULL,
|
|
|
|
0x0020600000000000ULL, 0x0060600000000000ULL,
|
|
|
|
0x0020600000000000ULL, 0x0000600000000000ULL,
|
|
|
|
0x0040600000000000ULL, 0x0060600000000000ULL,
|
|
|
|
END_SIGN
|
|
|
|
};
|
|
|
|
|
|
|
|
/* Module Loadable parameters. */
|
|
|
|
static unsigned int tx_fifo_num = 1;
|
|
|
|
static unsigned int tx_fifo_len[MAX_TX_FIFOS] =
|
|
|
|
{[0 ...(MAX_TX_FIFOS - 1)] = 0 };
|
|
|
|
static unsigned int rx_ring_num = 1;
|
|
|
|
static unsigned int rx_ring_sz[MAX_RX_RINGS] =
|
|
|
|
{[0 ...(MAX_RX_RINGS - 1)] = 0 };
|
2005-08-03 13:24:33 -06:00
|
|
|
static unsigned int rts_frm_len[MAX_RX_RINGS] =
|
|
|
|
{[0 ...(MAX_RX_RINGS - 1)] = 0 };
|
2005-08-03 13:27:09 -06:00
|
|
|
static unsigned int use_continuous_tx_intrs = 1;
|
2005-04-16 16:20:36 -06:00
|
|
|
static unsigned int rmac_pause_time = 65535;
|
|
|
|
static unsigned int mc_pause_threshold_q0q3 = 187;
|
|
|
|
static unsigned int mc_pause_threshold_q4q7 = 187;
|
|
|
|
static unsigned int shared_splits;
|
|
|
|
static unsigned int tmac_util_period = 5;
|
|
|
|
static unsigned int rmac_util_period = 5;
|
|
|
|
#ifndef CONFIG_S2IO_NAPI
|
|
|
|
static unsigned int indicate_max_pkts;
|
|
|
|
#endif
|
|
|
|
|
2005-08-03 13:24:33 -06:00
|
|
|
/*
|
2005-04-16 16:20:36 -06:00
|
|
|
* S2IO device table.
|
2005-08-03 13:24:33 -06:00
|
|
|
* This table lists all the devices that this driver supports.
|
2005-04-16 16:20:36 -06:00
|
|
|
*/
|
|
|
|
static struct pci_device_id s2io_tbl[] __devinitdata = {
|
|
|
|
{PCI_VENDOR_ID_S2IO, PCI_DEVICE_ID_S2IO_WIN,
|
|
|
|
PCI_ANY_ID, PCI_ANY_ID},
|
|
|
|
{PCI_VENDOR_ID_S2IO, PCI_DEVICE_ID_S2IO_UNI,
|
|
|
|
PCI_ANY_ID, PCI_ANY_ID},
|
|
|
|
{PCI_VENDOR_ID_S2IO, PCI_DEVICE_ID_HERC_WIN,
|
2005-08-03 13:24:33 -06:00
|
|
|
PCI_ANY_ID, PCI_ANY_ID},
|
|
|
|
{PCI_VENDOR_ID_S2IO, PCI_DEVICE_ID_HERC_UNI,
|
|
|
|
PCI_ANY_ID, PCI_ANY_ID},
|
2005-04-16 16:20:36 -06:00
|
|
|
{0,}
|
|
|
|
};
|
|
|
|
|
|
|
|
MODULE_DEVICE_TABLE(pci, s2io_tbl);
|
|
|
|
|
|
|
|
static struct pci_driver s2io_driver = {
|
|
|
|
.name = "S2IO",
|
|
|
|
.id_table = s2io_tbl,
|
|
|
|
.probe = s2io_init_nic,
|
|
|
|
.remove = __devexit_p(s2io_rem_nic),
|
|
|
|
};
|
|
|
|
|
|
|
|
/* A simplifier macro used both by init and free shared_mem Fns(). */
|
|
|
|
#define TXD_MEM_PAGE_CNT(len, per_each) ((len+per_each - 1) / per_each)
|
|
|
|
|
|
|
|
/**
|
|
|
|
* init_shared_mem - Allocation and Initialization of Memory
|
|
|
|
* @nic: Device private variable.
|
2005-08-03 13:24:33 -06:00
|
|
|
* Description: The function allocates all the memory areas shared
|
|
|
|
* between the NIC and the driver. This includes Tx descriptors,
|
2005-04-16 16:20:36 -06:00
|
|
|
* Rx descriptors and the statistics block.
|
|
|
|
*/
|
|
|
|
|
|
|
|
static int init_shared_mem(struct s2io_nic *nic)
|
|
|
|
{
|
|
|
|
u32 size;
|
|
|
|
void *tmp_v_addr, *tmp_v_addr_next;
|
|
|
|
dma_addr_t tmp_p_addr, tmp_p_addr_next;
|
|
|
|
RxD_block_t *pre_rxd_blk = NULL;
|
2005-08-03 13:24:33 -06:00
|
|
|
int i, j, blk_cnt, rx_sz, tx_sz;
|
2005-04-16 16:20:36 -06:00
|
|
|
int lst_size, lst_per_page;
|
|
|
|
struct net_device *dev = nic->dev;
|
|
|
|
#ifdef CONFIG_2BUFF_MODE
|
2005-08-03 13:24:33 -06:00
|
|
|
u64 tmp;
|
2005-04-16 16:20:36 -06:00
|
|
|
buffAdd_t *ba;
|
|
|
|
#endif
|
|
|
|
|
|
|
|
mac_info_t *mac_control;
|
|
|
|
struct config_param *config;
|
|
|
|
|
|
|
|
mac_control = &nic->mac_control;
|
|
|
|
config = &nic->config;
|
|
|
|
|
|
|
|
|
|
|
|
/* Allocation and initialization of TXDLs in FIOFs */
|
|
|
|
size = 0;
|
|
|
|
for (i = 0; i < config->tx_fifo_num; i++) {
|
|
|
|
size += config->tx_cfg[i].fifo_len;
|
|
|
|
}
|
|
|
|
if (size > MAX_AVAILABLE_TXDS) {
|
|
|
|
DBG_PRINT(ERR_DBG, "%s: Total number of Tx FIFOs ",
|
|
|
|
dev->name);
|
|
|
|
DBG_PRINT(ERR_DBG, "exceeds the maximum value ");
|
|
|
|
DBG_PRINT(ERR_DBG, "that can be used\n");
|
|
|
|
return FAILURE;
|
|
|
|
}
|
|
|
|
|
|
|
|
lst_size = (sizeof(TxD_t) * config->max_txds);
|
2005-08-03 13:24:33 -06:00
|
|
|
tx_sz = lst_size * size;
|
2005-04-16 16:20:36 -06:00
|
|
|
lst_per_page = PAGE_SIZE / lst_size;
|
|
|
|
|
|
|
|
for (i = 0; i < config->tx_fifo_num; i++) {
|
|
|
|
int fifo_len = config->tx_cfg[i].fifo_len;
|
|
|
|
int list_holder_size = fifo_len * sizeof(list_info_hold_t);
|
2005-08-03 13:24:33 -06:00
|
|
|
mac_control->fifos[i].list_info = kmalloc(list_holder_size,
|
|
|
|
GFP_KERNEL);
|
|
|
|
if (!mac_control->fifos[i].list_info) {
|
2005-04-16 16:20:36 -06:00
|
|
|
DBG_PRINT(ERR_DBG,
|
|
|
|
"Malloc failed for list_info\n");
|
|
|
|
return -ENOMEM;
|
|
|
|
}
|
2005-08-03 13:24:33 -06:00
|
|
|
memset(mac_control->fifos[i].list_info, 0, list_holder_size);
|
2005-04-16 16:20:36 -06:00
|
|
|
}
|
|
|
|
for (i = 0; i < config->tx_fifo_num; i++) {
|
|
|
|
int page_num = TXD_MEM_PAGE_CNT(config->tx_cfg[i].fifo_len,
|
|
|
|
lst_per_page);
|
2005-08-03 13:24:33 -06:00
|
|
|
mac_control->fifos[i].tx_curr_put_info.offset = 0;
|
|
|
|
mac_control->fifos[i].tx_curr_put_info.fifo_len =
|
2005-04-16 16:20:36 -06:00
|
|
|
config->tx_cfg[i].fifo_len - 1;
|
2005-08-03 13:24:33 -06:00
|
|
|
mac_control->fifos[i].tx_curr_get_info.offset = 0;
|
|
|
|
mac_control->fifos[i].tx_curr_get_info.fifo_len =
|
2005-04-16 16:20:36 -06:00
|
|
|
config->tx_cfg[i].fifo_len - 1;
|
2005-08-03 13:24:33 -06:00
|
|
|
mac_control->fifos[i].fifo_no = i;
|
|
|
|
mac_control->fifos[i].nic = nic;
|
|
|
|
mac_control->fifos[i].max_txds = MAX_SKB_FRAGS;
|
|
|
|
|
2005-04-16 16:20:36 -06:00
|
|
|
for (j = 0; j < page_num; j++) {
|
|
|
|
int k = 0;
|
|
|
|
dma_addr_t tmp_p;
|
|
|
|
void *tmp_v;
|
|
|
|
tmp_v = pci_alloc_consistent(nic->pdev,
|
|
|
|
PAGE_SIZE, &tmp_p);
|
|
|
|
if (!tmp_v) {
|
|
|
|
DBG_PRINT(ERR_DBG,
|
|
|
|
"pci_alloc_consistent ");
|
|
|
|
DBG_PRINT(ERR_DBG, "failed for TxDL\n");
|
|
|
|
return -ENOMEM;
|
|
|
|
}
|
|
|
|
while (k < lst_per_page) {
|
|
|
|
int l = (j * lst_per_page) + k;
|
|
|
|
if (l == config->tx_cfg[i].fifo_len)
|
2005-08-03 13:24:33 -06:00
|
|
|
break;
|
|
|
|
mac_control->fifos[i].list_info[l].list_virt_addr =
|
2005-04-16 16:20:36 -06:00
|
|
|
tmp_v + (k * lst_size);
|
2005-08-03 13:24:33 -06:00
|
|
|
mac_control->fifos[i].list_info[l].list_phy_addr =
|
2005-04-16 16:20:36 -06:00
|
|
|
tmp_p + (k * lst_size);
|
|
|
|
k++;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Allocation and initialization of RXDs in Rings */
|
|
|
|
size = 0;
|
|
|
|
for (i = 0; i < config->rx_ring_num; i++) {
|
|
|
|
if (config->rx_cfg[i].num_rxd % (MAX_RXDS_PER_BLOCK + 1)) {
|
|
|
|
DBG_PRINT(ERR_DBG, "%s: RxD count of ", dev->name);
|
|
|
|
DBG_PRINT(ERR_DBG, "Ring%d is not a multiple of ",
|
|
|
|
i);
|
|
|
|
DBG_PRINT(ERR_DBG, "RxDs per Block");
|
|
|
|
return FAILURE;
|
|
|
|
}
|
|
|
|
size += config->rx_cfg[i].num_rxd;
|
2005-08-03 13:24:33 -06:00
|
|
|
mac_control->rings[i].block_count =
|
2005-04-16 16:20:36 -06:00
|
|
|
config->rx_cfg[i].num_rxd / (MAX_RXDS_PER_BLOCK + 1);
|
2005-08-03 13:24:33 -06:00
|
|
|
mac_control->rings[i].pkt_cnt =
|
|
|
|
config->rx_cfg[i].num_rxd - mac_control->rings[i].block_count;
|
2005-04-16 16:20:36 -06:00
|
|
|
}
|
2005-08-03 13:24:33 -06:00
|
|
|
size = (size * (sizeof(RxD_t)));
|
|
|
|
rx_sz = size;
|
2005-04-16 16:20:36 -06:00
|
|
|
|
|
|
|
for (i = 0; i < config->rx_ring_num; i++) {
|
2005-08-03 13:24:33 -06:00
|
|
|
mac_control->rings[i].rx_curr_get_info.block_index = 0;
|
|
|
|
mac_control->rings[i].rx_curr_get_info.offset = 0;
|
|
|
|
mac_control->rings[i].rx_curr_get_info.ring_len =
|
2005-04-16 16:20:36 -06:00
|
|
|
config->rx_cfg[i].num_rxd - 1;
|
2005-08-03 13:24:33 -06:00
|
|
|
mac_control->rings[i].rx_curr_put_info.block_index = 0;
|
|
|
|
mac_control->rings[i].rx_curr_put_info.offset = 0;
|
|
|
|
mac_control->rings[i].rx_curr_put_info.ring_len =
|
2005-04-16 16:20:36 -06:00
|
|
|
config->rx_cfg[i].num_rxd - 1;
|
2005-08-03 13:24:33 -06:00
|
|
|
mac_control->rings[i].nic = nic;
|
|
|
|
mac_control->rings[i].ring_no = i;
|
|
|
|
|
2005-04-16 16:20:36 -06:00
|
|
|
blk_cnt =
|
|
|
|
config->rx_cfg[i].num_rxd / (MAX_RXDS_PER_BLOCK + 1);
|
|
|
|
/* Allocating all the Rx blocks */
|
|
|
|
for (j = 0; j < blk_cnt; j++) {
|
|
|
|
#ifndef CONFIG_2BUFF_MODE
|
|
|
|
size = (MAX_RXDS_PER_BLOCK + 1) * (sizeof(RxD_t));
|
|
|
|
#else
|
|
|
|
size = SIZE_OF_BLOCK;
|
|
|
|
#endif
|
|
|
|
tmp_v_addr = pci_alloc_consistent(nic->pdev, size,
|
|
|
|
&tmp_p_addr);
|
|
|
|
if (tmp_v_addr == NULL) {
|
|
|
|
/*
|
2005-08-03 13:24:33 -06:00
|
|
|
* In case of failure, free_shared_mem()
|
|
|
|
* is called, which should free any
|
|
|
|
* memory that was alloced till the
|
2005-04-16 16:20:36 -06:00
|
|
|
* failure happened.
|
|
|
|
*/
|
2005-08-03 13:24:33 -06:00
|
|
|
mac_control->rings[i].rx_blocks[j].block_virt_addr =
|
2005-04-16 16:20:36 -06:00
|
|
|
tmp_v_addr;
|
|
|
|
return -ENOMEM;
|
|
|
|
}
|
|
|
|
memset(tmp_v_addr, 0, size);
|
2005-08-03 13:24:33 -06:00
|
|
|
mac_control->rings[i].rx_blocks[j].block_virt_addr =
|
|
|
|
tmp_v_addr;
|
|
|
|
mac_control->rings[i].rx_blocks[j].block_dma_addr =
|
|
|
|
tmp_p_addr;
|
2005-04-16 16:20:36 -06:00
|
|
|
}
|
|
|
|
/* Interlinking all Rx Blocks */
|
|
|
|
for (j = 0; j < blk_cnt; j++) {
|
2005-08-03 13:24:33 -06:00
|
|
|
tmp_v_addr =
|
|
|
|
mac_control->rings[i].rx_blocks[j].block_virt_addr;
|
2005-04-16 16:20:36 -06:00
|
|
|
tmp_v_addr_next =
|
2005-08-03 13:24:33 -06:00
|
|
|
mac_control->rings[i].rx_blocks[(j + 1) %
|
2005-04-16 16:20:36 -06:00
|
|
|
blk_cnt].block_virt_addr;
|
2005-08-03 13:24:33 -06:00
|
|
|
tmp_p_addr =
|
|
|
|
mac_control->rings[i].rx_blocks[j].block_dma_addr;
|
2005-04-16 16:20:36 -06:00
|
|
|
tmp_p_addr_next =
|
2005-08-03 13:24:33 -06:00
|
|
|
mac_control->rings[i].rx_blocks[(j + 1) %
|
2005-04-16 16:20:36 -06:00
|
|
|
blk_cnt].block_dma_addr;
|
|
|
|
|
|
|
|
pre_rxd_blk = (RxD_block_t *) tmp_v_addr;
|
2005-08-03 13:24:33 -06:00
|
|
|
pre_rxd_blk->reserved_1 = END_OF_BLOCK; /* last RxD
|
2005-04-16 16:20:36 -06:00
|
|
|
* marker.
|
|
|
|
*/
|
|
|
|
#ifndef CONFIG_2BUFF_MODE
|
|
|
|
pre_rxd_blk->reserved_2_pNext_RxD_block =
|
|
|
|
(unsigned long) tmp_v_addr_next;
|
|
|
|
#endif
|
|
|
|
pre_rxd_blk->pNext_RxD_Blk_physical =
|
|
|
|
(u64) tmp_p_addr_next;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
#ifdef CONFIG_2BUFF_MODE
|
2005-08-03 13:24:33 -06:00
|
|
|
/*
|
2005-04-16 16:20:36 -06:00
|
|
|
* Allocation of Storages for buffer addresses in 2BUFF mode
|
|
|
|
* and the buffers as well.
|
|
|
|
*/
|
|
|
|
for (i = 0; i < config->rx_ring_num; i++) {
|
|
|
|
blk_cnt =
|
|
|
|
config->rx_cfg[i].num_rxd / (MAX_RXDS_PER_BLOCK + 1);
|
2005-08-03 13:24:33 -06:00
|
|
|
mac_control->rings[i].ba = kmalloc((sizeof(buffAdd_t *) * blk_cnt),
|
2005-04-16 16:20:36 -06:00
|
|
|
GFP_KERNEL);
|
2005-08-03 13:24:33 -06:00
|
|
|
if (!mac_control->rings[i].ba)
|
2005-04-16 16:20:36 -06:00
|
|
|
return -ENOMEM;
|
|
|
|
for (j = 0; j < blk_cnt; j++) {
|
|
|
|
int k = 0;
|
2005-08-03 13:24:33 -06:00
|
|
|
mac_control->rings[i].ba[j] = kmalloc((sizeof(buffAdd_t) *
|
2005-04-16 16:20:36 -06:00
|
|
|
(MAX_RXDS_PER_BLOCK + 1)),
|
|
|
|
GFP_KERNEL);
|
2005-08-03 13:24:33 -06:00
|
|
|
if (!mac_control->rings[i].ba[j])
|
2005-04-16 16:20:36 -06:00
|
|
|
return -ENOMEM;
|
|
|
|
while (k != MAX_RXDS_PER_BLOCK) {
|
2005-08-03 13:24:33 -06:00
|
|
|
ba = &mac_control->rings[i].ba[j][k];
|
2005-04-16 16:20:36 -06:00
|
|
|
|
2005-08-03 13:24:33 -06:00
|
|
|
ba->ba_0_org = (void *) kmalloc
|
2005-04-16 16:20:36 -06:00
|
|
|
(BUF0_LEN + ALIGN_SIZE, GFP_KERNEL);
|
|
|
|
if (!ba->ba_0_org)
|
|
|
|
return -ENOMEM;
|
2005-08-03 13:24:33 -06:00
|
|
|
tmp = (u64) ba->ba_0_org;
|
2005-04-16 16:20:36 -06:00
|
|
|
tmp += ALIGN_SIZE;
|
2005-08-03 13:24:33 -06:00
|
|
|
tmp &= ~((u64) ALIGN_SIZE);
|
2005-04-16 16:20:36 -06:00
|
|
|
ba->ba_0 = (void *) tmp;
|
|
|
|
|
2005-08-03 13:24:33 -06:00
|
|
|
ba->ba_1_org = (void *) kmalloc
|
2005-04-16 16:20:36 -06:00
|
|
|
(BUF1_LEN + ALIGN_SIZE, GFP_KERNEL);
|
|
|
|
if (!ba->ba_1_org)
|
|
|
|
return -ENOMEM;
|
2005-08-03 13:24:33 -06:00
|
|
|
tmp = (u64) ba->ba_1_org;
|
2005-04-16 16:20:36 -06:00
|
|
|
tmp += ALIGN_SIZE;
|
2005-08-03 13:24:33 -06:00
|
|
|
tmp &= ~((u64) ALIGN_SIZE);
|
2005-04-16 16:20:36 -06:00
|
|
|
ba->ba_1 = (void *) tmp;
|
|
|
|
k++;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
|
|
|
|
/* Allocation and initialization of Statistics block */
|
|
|
|
size = sizeof(StatInfo_t);
|
|
|
|
mac_control->stats_mem = pci_alloc_consistent
|
|
|
|
(nic->pdev, size, &mac_control->stats_mem_phy);
|
|
|
|
|
|
|
|
if (!mac_control->stats_mem) {
|
2005-08-03 13:24:33 -06:00
|
|
|
/*
|
|
|
|
* In case of failure, free_shared_mem() is called, which
|
|
|
|
* should free any memory that was alloced till the
|
2005-04-16 16:20:36 -06:00
|
|
|
* failure happened.
|
|
|
|
*/
|
|
|
|
return -ENOMEM;
|
|
|
|
}
|
|
|
|
mac_control->stats_mem_sz = size;
|
|
|
|
|
|
|
|
tmp_v_addr = mac_control->stats_mem;
|
|
|
|
mac_control->stats_info = (StatInfo_t *) tmp_v_addr;
|
|
|
|
memset(tmp_v_addr, 0, size);
|
|
|
|
DBG_PRINT(INIT_DBG, "%s:Ring Mem PHY: 0x%llx\n", dev->name,
|
|
|
|
(unsigned long long) tmp_p_addr);
|
|
|
|
|
|
|
|
return SUCCESS;
|
|
|
|
}
|
|
|
|
|
2005-08-03 13:24:33 -06:00
|
|
|
/**
|
|
|
|
* free_shared_mem - Free the allocated Memory
|
2005-04-16 16:20:36 -06:00
|
|
|
* @nic: Device private variable.
|
|
|
|
* Description: This function is to free all memory locations allocated by
|
|
|
|
* the init_shared_mem() function and return it to the kernel.
|
|
|
|
*/
|
|
|
|
|
|
|
|
static void free_shared_mem(struct s2io_nic *nic)
|
|
|
|
{
|
|
|
|
int i, j, blk_cnt, size;
|
|
|
|
void *tmp_v_addr;
|
|
|
|
dma_addr_t tmp_p_addr;
|
|
|
|
mac_info_t *mac_control;
|
|
|
|
struct config_param *config;
|
|
|
|
int lst_size, lst_per_page;
|
|
|
|
|
|
|
|
|
|
|
|
if (!nic)
|
|
|
|
return;
|
|
|
|
|
|
|
|
mac_control = &nic->mac_control;
|
|
|
|
config = &nic->config;
|
|
|
|
|
|
|
|
lst_size = (sizeof(TxD_t) * config->max_txds);
|
|
|
|
lst_per_page = PAGE_SIZE / lst_size;
|
|
|
|
|
|
|
|
for (i = 0; i < config->tx_fifo_num; i++) {
|
|
|
|
int page_num = TXD_MEM_PAGE_CNT(config->tx_cfg[i].fifo_len,
|
|
|
|
lst_per_page);
|
|
|
|
for (j = 0; j < page_num; j++) {
|
|
|
|
int mem_blks = (j * lst_per_page);
|
2005-08-03 13:24:33 -06:00
|
|
|
if (!mac_control->fifos[i].list_info[mem_blks].
|
|
|
|
list_virt_addr)
|
2005-04-16 16:20:36 -06:00
|
|
|
break;
|
|
|
|
pci_free_consistent(nic->pdev, PAGE_SIZE,
|
2005-08-03 13:24:33 -06:00
|
|
|
mac_control->fifos[i].
|
|
|
|
list_info[mem_blks].
|
2005-04-16 16:20:36 -06:00
|
|
|
list_virt_addr,
|
2005-08-03 13:24:33 -06:00
|
|
|
mac_control->fifos[i].
|
|
|
|
list_info[mem_blks].
|
2005-04-16 16:20:36 -06:00
|
|
|
list_phy_addr);
|
|
|
|
}
|
2005-08-03 13:24:33 -06:00
|
|
|
kfree(mac_control->fifos[i].list_info);
|
2005-04-16 16:20:36 -06:00
|
|
|
}
|
|
|
|
|
|
|
|
#ifndef CONFIG_2BUFF_MODE
|
|
|
|
size = (MAX_RXDS_PER_BLOCK + 1) * (sizeof(RxD_t));
|
|
|
|
#else
|
|
|
|
size = SIZE_OF_BLOCK;
|
|
|
|
#endif
|
|
|
|
for (i = 0; i < config->rx_ring_num; i++) {
|
2005-08-03 13:24:33 -06:00
|
|
|
blk_cnt = mac_control->rings[i].block_count;
|
2005-04-16 16:20:36 -06:00
|
|
|
for (j = 0; j < blk_cnt; j++) {
|
2005-08-03 13:24:33 -06:00
|
|
|
tmp_v_addr = mac_control->rings[i].rx_blocks[j].
|
|
|
|
block_virt_addr;
|
|
|
|
tmp_p_addr = mac_control->rings[i].rx_blocks[j].
|
|
|
|
block_dma_addr;
|
2005-04-16 16:20:36 -06:00
|
|
|
if (tmp_v_addr == NULL)
|
|
|
|
break;
|
|
|
|
pci_free_consistent(nic->pdev, size,
|
|
|
|
tmp_v_addr, tmp_p_addr);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
#ifdef CONFIG_2BUFF_MODE
|
|
|
|
/* Freeing buffer storage addresses in 2BUFF mode. */
|
|
|
|
for (i = 0; i < config->rx_ring_num; i++) {
|
|
|
|
blk_cnt =
|
|
|
|
config->rx_cfg[i].num_rxd / (MAX_RXDS_PER_BLOCK + 1);
|
|
|
|
for (j = 0; j < blk_cnt; j++) {
|
|
|
|
int k = 0;
|
2005-08-03 13:24:33 -06:00
|
|
|
if (!mac_control->rings[i].ba[j])
|
|
|
|
continue;
|
2005-04-16 16:20:36 -06:00
|
|
|
while (k != MAX_RXDS_PER_BLOCK) {
|
2005-08-03 13:24:33 -06:00
|
|
|
buffAdd_t *ba = &mac_control->rings[i].ba[j][k];
|
2005-04-16 16:20:36 -06:00
|
|
|
kfree(ba->ba_0_org);
|
|
|
|
kfree(ba->ba_1_org);
|
|
|
|
k++;
|
|
|
|
}
|
2005-08-03 13:24:33 -06:00
|
|
|
kfree(mac_control->rings[i].ba[j]);
|
2005-04-16 16:20:36 -06:00
|
|
|
}
|
2005-08-03 13:24:33 -06:00
|
|
|
if (mac_control->rings[i].ba)
|
|
|
|
kfree(mac_control->rings[i].ba);
|
2005-04-16 16:20:36 -06:00
|
|
|
}
|
|
|
|
#endif
|
|
|
|
|
|
|
|
if (mac_control->stats_mem) {
|
|
|
|
pci_free_consistent(nic->pdev,
|
|
|
|
mac_control->stats_mem_sz,
|
|
|
|
mac_control->stats_mem,
|
|
|
|
mac_control->stats_mem_phy);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2005-08-03 13:24:33 -06:00
|
|
|
/**
|
|
|
|
* init_nic - Initialization of hardware
|
2005-04-16 16:20:36 -06:00
|
|
|
* @nic: device peivate variable
|
2005-08-03 13:24:33 -06:00
|
|
|
* Description: The function sequentially configures every block
|
|
|
|
* of the H/W from their reset values.
|
|
|
|
* Return Value: SUCCESS on success and
|
2005-04-16 16:20:36 -06:00
|
|
|
* '-1' on failure (endian settings incorrect).
|
|
|
|
*/
|
|
|
|
|
|
|
|
static int init_nic(struct s2io_nic *nic)
|
|
|
|
{
|
|
|
|
XENA_dev_config_t __iomem *bar0 = nic->bar0;
|
|
|
|
struct net_device *dev = nic->dev;
|
|
|
|
register u64 val64 = 0;
|
|
|
|
void __iomem *add;
|
|
|
|
u32 time;
|
|
|
|
int i, j;
|
|
|
|
mac_info_t *mac_control;
|
|
|
|
struct config_param *config;
|
|
|
|
int mdio_cnt = 0, dtx_cnt = 0;
|
|
|
|
unsigned long long mem_share;
|
2005-08-03 13:24:33 -06:00
|
|
|
int mem_size;
|
2005-04-16 16:20:36 -06:00
|
|
|
|
|
|
|
mac_control = &nic->mac_control;
|
|
|
|
config = &nic->config;
|
|
|
|
|
2005-08-03 13:27:09 -06:00
|
|
|
/* to set the swapper controle on the card */
|
2005-08-03 13:24:33 -06:00
|
|
|
if(s2io_set_swapper(nic)) {
|
2005-04-16 16:20:36 -06:00
|
|
|
DBG_PRINT(ERR_DBG,"ERROR: Setting Swapper failed\n");
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Remove XGXS from reset state */
|
|
|
|
val64 = 0;
|
|
|
|
writeq(val64, &bar0->sw_reset);
|
|
|
|
msleep(500);
|
2005-08-03 13:24:33 -06:00
|
|
|
val64 = readq(&bar0->sw_reset);
|
2005-04-16 16:20:36 -06:00
|
|
|
|
|
|
|
/* Enable Receiving broadcasts */
|
|
|
|
add = &bar0->mac_cfg;
|
|
|
|
val64 = readq(&bar0->mac_cfg);
|
|
|
|
val64 |= MAC_RMAC_BCAST_ENABLE;
|
|
|
|
writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key);
|
|
|
|
writel((u32) val64, add);
|
|
|
|
writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key);
|
|
|
|
writel((u32) (val64 >> 32), (add + 4));
|
|
|
|
|
|
|
|
/* Read registers in all blocks */
|
|
|
|
val64 = readq(&bar0->mac_int_mask);
|
|
|
|
val64 = readq(&bar0->mc_int_mask);
|
|
|
|
val64 = readq(&bar0->xgxs_int_mask);
|
|
|
|
|
|
|
|
/* Set MTU */
|
|
|
|
val64 = dev->mtu;
|
|
|
|
writeq(vBIT(val64, 2, 14), &bar0->rmac_max_pyld_len);
|
|
|
|
|
2005-08-03 13:24:33 -06:00
|
|
|
/*
|
|
|
|
* Configuring the XAUI Interface of Xena.
|
2005-04-16 16:20:36 -06:00
|
|
|
* ***************************************
|
2005-08-03 13:24:33 -06:00
|
|
|
* To Configure the Xena's XAUI, one has to write a series
|
|
|
|
* of 64 bit values into two registers in a particular
|
|
|
|
* sequence. Hence a macro 'SWITCH_SIGN' has been defined
|
|
|
|
* which will be defined in the array of configuration values
|
|
|
|
* (default_dtx_cfg & default_mdio_cfg) at appropriate places
|
|
|
|
* to switch writing from one regsiter to another. We continue
|
2005-04-16 16:20:36 -06:00
|
|
|
* writing these values until we encounter the 'END_SIGN' macro.
|
2005-08-03 13:24:33 -06:00
|
|
|
* For example, After making a series of 21 writes into
|
|
|
|
* dtx_control register the 'SWITCH_SIGN' appears and hence we
|
2005-04-16 16:20:36 -06:00
|
|
|
* start writing into mdio_control until we encounter END_SIGN.
|
|
|
|
*/
|
|
|
|
while (1) {
|
|
|
|
dtx_cfg:
|
|
|
|
while (default_dtx_cfg[dtx_cnt] != END_SIGN) {
|
|
|
|
if (default_dtx_cfg[dtx_cnt] == SWITCH_SIGN) {
|
|
|
|
dtx_cnt++;
|
|
|
|
goto mdio_cfg;
|
|
|
|
}
|
|
|
|
SPECIAL_REG_WRITE(default_dtx_cfg[dtx_cnt],
|
|
|
|
&bar0->dtx_control, UF);
|
|
|
|
val64 = readq(&bar0->dtx_control);
|
|
|
|
dtx_cnt++;
|
|
|
|
}
|
|
|
|
mdio_cfg:
|
|
|
|
while (default_mdio_cfg[mdio_cnt] != END_SIGN) {
|
|
|
|
if (default_mdio_cfg[mdio_cnt] == SWITCH_SIGN) {
|
|
|
|
mdio_cnt++;
|
|
|
|
goto dtx_cfg;
|
|
|
|
}
|
|
|
|
SPECIAL_REG_WRITE(default_mdio_cfg[mdio_cnt],
|
|
|
|
&bar0->mdio_control, UF);
|
|
|
|
val64 = readq(&bar0->mdio_control);
|
|
|
|
mdio_cnt++;
|
|
|
|
}
|
|
|
|
if ((default_dtx_cfg[dtx_cnt] == END_SIGN) &&
|
|
|
|
(default_mdio_cfg[mdio_cnt] == END_SIGN)) {
|
|
|
|
break;
|
|
|
|
} else {
|
|
|
|
goto dtx_cfg;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Tx DMA Initialization */
|
|
|
|
val64 = 0;
|
|
|
|
writeq(val64, &bar0->tx_fifo_partition_0);
|
|
|
|
writeq(val64, &bar0->tx_fifo_partition_1);
|
|
|
|
writeq(val64, &bar0->tx_fifo_partition_2);
|
|
|
|
writeq(val64, &bar0->tx_fifo_partition_3);
|
|
|
|
|
|
|
|
|
|
|
|
for (i = 0, j = 0; i < config->tx_fifo_num; i++) {
|
|
|
|
val64 |=
|
|
|
|
vBIT(config->tx_cfg[i].fifo_len - 1, ((i * 32) + 19),
|
|
|
|
13) | vBIT(config->tx_cfg[i].fifo_priority,
|
|
|
|
((i * 32) + 5), 3);
|
|
|
|
|
|
|
|
if (i == (config->tx_fifo_num - 1)) {
|
|
|
|
if (i % 2 == 0)
|
|
|
|
i++;
|
|
|
|
}
|
|
|
|
|
|
|
|
switch (i) {
|
|
|
|
case 1:
|
|
|
|
writeq(val64, &bar0->tx_fifo_partition_0);
|
|
|
|
val64 = 0;
|
|
|
|
break;
|
|
|
|
case 3:
|
|
|
|
writeq(val64, &bar0->tx_fifo_partition_1);
|
|
|
|
val64 = 0;
|
|
|
|
break;
|
|
|
|
case 5:
|
|
|
|
writeq(val64, &bar0->tx_fifo_partition_2);
|
|
|
|
val64 = 0;
|
|
|
|
break;
|
|
|
|
case 7:
|
|
|
|
writeq(val64, &bar0->tx_fifo_partition_3);
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Enable Tx FIFO partition 0. */
|
|
|
|
val64 = readq(&bar0->tx_fifo_partition_0);
|
|
|
|
val64 |= BIT(0); /* To enable the FIFO partition. */
|
|
|
|
writeq(val64, &bar0->tx_fifo_partition_0);
|
|
|
|
|
2005-08-03 13:27:09 -06:00
|
|
|
/*
|
|
|
|
* Disable 4 PCCs for Xena1, 2 and 3 as per H/W bug
|
|
|
|
* SXE-008 TRANSMIT DMA ARBITRATION ISSUE.
|
|
|
|
*/
|
|
|
|
if (get_xena_rev_id(nic->pdev) < 4)
|
|
|
|
writeq(PCC_ENABLE_FOUR, &bar0->pcc_enable);
|
|
|
|
|
2005-04-16 16:20:36 -06:00
|
|
|
val64 = readq(&bar0->tx_fifo_partition_0);
|
|
|
|
DBG_PRINT(INIT_DBG, "Fifo partition at: 0x%p is: 0x%llx\n",
|
|
|
|
&bar0->tx_fifo_partition_0, (unsigned long long) val64);
|
|
|
|
|
2005-08-03 13:24:33 -06:00
|
|
|
/*
|
|
|
|
* Initialization of Tx_PA_CONFIG register to ignore packet
|
2005-04-16 16:20:36 -06:00
|
|
|
* integrity checking.
|
|
|
|
*/
|
|
|
|
val64 = readq(&bar0->tx_pa_cfg);
|
|
|
|
val64 |= TX_PA_CFG_IGNORE_FRM_ERR | TX_PA_CFG_IGNORE_SNAP_OUI |
|
|
|
|
TX_PA_CFG_IGNORE_LLC_CTRL | TX_PA_CFG_IGNORE_L2_ERR;
|
|
|
|
writeq(val64, &bar0->tx_pa_cfg);
|
|
|
|
|
|
|
|
/* Rx DMA intialization. */
|
|
|
|
val64 = 0;
|
|
|
|
for (i = 0; i < config->rx_ring_num; i++) {
|
|
|
|
val64 |=
|
|
|
|
vBIT(config->rx_cfg[i].ring_priority, (5 + (i * 8)),
|
|
|
|
3);
|
|
|
|
}
|
|
|
|
writeq(val64, &bar0->rx_queue_priority);
|
|
|
|
|
2005-08-03 13:24:33 -06:00
|
|
|
/*
|
|
|
|
* Allocating equal share of memory to all the
|
2005-04-16 16:20:36 -06:00
|
|
|
* configured Rings.
|
|
|
|
*/
|
|
|
|
val64 = 0;
|
2005-08-03 13:24:33 -06:00
|
|
|
mem_size = 64;
|
2005-04-16 16:20:36 -06:00
|
|
|
for (i = 0; i < config->rx_ring_num; i++) {
|
|
|
|
switch (i) {
|
|
|
|
case 0:
|
2005-08-03 13:24:33 -06:00
|
|
|
mem_share = (mem_size / config->rx_ring_num +
|
|
|
|
mem_size % config->rx_ring_num);
|
2005-04-16 16:20:36 -06:00
|
|
|
val64 |= RX_QUEUE_CFG_Q0_SZ(mem_share);
|
|
|
|
continue;
|
|
|
|
case 1:
|
2005-08-03 13:24:33 -06:00
|
|
|
mem_share = (mem_size / config->rx_ring_num);
|
2005-04-16 16:20:36 -06:00
|
|
|
val64 |= RX_QUEUE_CFG_Q1_SZ(mem_share);
|
|
|
|
continue;
|
|
|
|
case 2:
|
2005-08-03 13:24:33 -06:00
|
|
|
mem_share = (mem_size / config->rx_ring_num);
|
2005-04-16 16:20:36 -06:00
|
|
|
val64 |= RX_QUEUE_CFG_Q2_SZ(mem_share);
|
|
|
|
continue;
|
|
|
|
case 3:
|
2005-08-03 13:24:33 -06:00
|
|
|
mem_share = (mem_size / config->rx_ring_num);
|
2005-04-16 16:20:36 -06:00
|
|
|
val64 |= RX_QUEUE_CFG_Q3_SZ(mem_share);
|
|
|
|
continue;
|
|
|
|
case 4:
|
2005-08-03 13:24:33 -06:00
|
|
|
mem_share = (mem_size / config->rx_ring_num);
|
2005-04-16 16:20:36 -06:00
|
|
|
val64 |= RX_QUEUE_CFG_Q4_SZ(mem_share);
|
|
|
|
continue;
|
|
|
|
case 5:
|
2005-08-03 13:24:33 -06:00
|
|
|
mem_share = (mem_size / config->rx_ring_num);
|
2005-04-16 16:20:36 -06:00
|
|
|
val64 |= RX_QUEUE_CFG_Q5_SZ(mem_share);
|
|
|
|
continue;
|
|
|
|
case 6:
|
2005-08-03 13:24:33 -06:00
|
|
|
mem_share = (mem_size / config->rx_ring_num);
|
2005-04-16 16:20:36 -06:00
|
|
|
val64 |= RX_QUEUE_CFG_Q6_SZ(mem_share);
|
|
|
|
continue;
|
|
|
|
case 7:
|
2005-08-03 13:24:33 -06:00
|
|
|
mem_share = (mem_size / config->rx_ring_num);
|
2005-04-16 16:20:36 -06:00
|
|
|
val64 |= RX_QUEUE_CFG_Q7_SZ(mem_share);
|
|
|
|
continue;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
writeq(val64, &bar0->rx_queue_cfg);
|
|
|
|
|
2005-08-03 13:24:33 -06:00
|
|
|
/*
|
2005-08-03 13:27:09 -06:00
|
|
|
* Filling Tx round robin registers
|
|
|
|
* as per the number of FIFOs
|
2005-04-16 16:20:36 -06:00
|
|
|
*/
|
2005-08-03 13:27:09 -06:00
|
|
|
switch (config->tx_fifo_num) {
|
|
|
|
case 1:
|
|
|
|
val64 = 0x0000000000000000ULL;
|
|
|
|
writeq(val64, &bar0->tx_w_round_robin_0);
|
|
|
|
writeq(val64, &bar0->tx_w_round_robin_1);
|
|
|
|
writeq(val64, &bar0->tx_w_round_robin_2);
|
|
|
|
writeq(val64, &bar0->tx_w_round_robin_3);
|
|
|
|
writeq(val64, &bar0->tx_w_round_robin_4);
|
|
|
|
break;
|
|
|
|
case 2:
|
|
|
|
val64 = 0x0000010000010000ULL;
|
|
|
|
writeq(val64, &bar0->tx_w_round_robin_0);
|
|
|
|
val64 = 0x0100000100000100ULL;
|
|
|
|
writeq(val64, &bar0->tx_w_round_robin_1);
|
|
|
|
val64 = 0x0001000001000001ULL;
|
|
|
|
writeq(val64, &bar0->tx_w_round_robin_2);
|
|
|
|
val64 = 0x0000010000010000ULL;
|
|
|
|
writeq(val64, &bar0->tx_w_round_robin_3);
|
|
|
|
val64 = 0x0100000000000000ULL;
|
|
|
|
writeq(val64, &bar0->tx_w_round_robin_4);
|
|
|
|
break;
|
|
|
|
case 3:
|
|
|
|
val64 = 0x0001000102000001ULL;
|
|
|
|
writeq(val64, &bar0->tx_w_round_robin_0);
|
|
|
|
val64 = 0x0001020000010001ULL;
|
|
|
|
writeq(val64, &bar0->tx_w_round_robin_1);
|
|
|
|
val64 = 0x0200000100010200ULL;
|
|
|
|
writeq(val64, &bar0->tx_w_round_robin_2);
|
|
|
|
val64 = 0x0001000102000001ULL;
|
|
|
|
writeq(val64, &bar0->tx_w_round_robin_3);
|
|
|
|
val64 = 0x0001020000000000ULL;
|
|
|
|
writeq(val64, &bar0->tx_w_round_robin_4);
|
|
|
|
break;
|
|
|
|
case 4:
|
|
|
|
val64 = 0x0001020300010200ULL;
|
|
|
|
writeq(val64, &bar0->tx_w_round_robin_0);
|
|
|
|
val64 = 0x0100000102030001ULL;
|
|
|
|
writeq(val64, &bar0->tx_w_round_robin_1);
|
|
|
|
val64 = 0x0200010000010203ULL;
|
|
|
|
writeq(val64, &bar0->tx_w_round_robin_2);
|
|
|
|
val64 = 0x0001020001000001ULL;
|
|
|
|
writeq(val64, &bar0->tx_w_round_robin_3);
|
|
|
|
val64 = 0x0203000100000000ULL;
|
|
|
|
writeq(val64, &bar0->tx_w_round_robin_4);
|
|
|
|
break;
|
|
|
|
case 5:
|
|
|
|
val64 = 0x0001000203000102ULL;
|
|
|
|
writeq(val64, &bar0->tx_w_round_robin_0);
|
|
|
|
val64 = 0x0001020001030004ULL;
|
|
|
|
writeq(val64, &bar0->tx_w_round_robin_1);
|
|
|
|
val64 = 0x0001000203000102ULL;
|
|
|
|
writeq(val64, &bar0->tx_w_round_robin_2);
|
|
|
|
val64 = 0x0001020001030004ULL;
|
|
|
|
writeq(val64, &bar0->tx_w_round_robin_3);
|
|
|
|
val64 = 0x0001000000000000ULL;
|
|
|
|
writeq(val64, &bar0->tx_w_round_robin_4);
|
|
|
|
break;
|
|
|
|
case 6:
|
|
|
|
val64 = 0x0001020304000102ULL;
|
|
|
|
writeq(val64, &bar0->tx_w_round_robin_0);
|
|
|
|
val64 = 0x0304050001020001ULL;
|
|
|
|
writeq(val64, &bar0->tx_w_round_robin_1);
|
|
|
|
val64 = 0x0203000100000102ULL;
|
|
|
|
writeq(val64, &bar0->tx_w_round_robin_2);
|
|
|
|
val64 = 0x0304000102030405ULL;
|
|
|
|
writeq(val64, &bar0->tx_w_round_robin_3);
|
|
|
|
val64 = 0x0001000200000000ULL;
|
|
|
|
writeq(val64, &bar0->tx_w_round_robin_4);
|
|
|
|
break;
|
|
|
|
case 7:
|
|
|
|
val64 = 0x0001020001020300ULL;
|
|
|
|
writeq(val64, &bar0->tx_w_round_robin_0);
|
|
|
|
val64 = 0x0102030400010203ULL;
|
|
|
|
writeq(val64, &bar0->tx_w_round_robin_1);
|
|
|
|
val64 = 0x0405060001020001ULL;
|
|
|
|
writeq(val64, &bar0->tx_w_round_robin_2);
|
|
|
|
val64 = 0x0304050000010200ULL;
|
|
|
|
writeq(val64, &bar0->tx_w_round_robin_3);
|
|
|
|
val64 = 0x0102030000000000ULL;
|
|
|
|
writeq(val64, &bar0->tx_w_round_robin_4);
|
|
|
|
break;
|
|
|
|
case 8:
|
|
|
|
val64 = 0x0001020300040105ULL;
|
|
|
|
writeq(val64, &bar0->tx_w_round_robin_0);
|
|
|
|
val64 = 0x0200030106000204ULL;
|
|
|
|
writeq(val64, &bar0->tx_w_round_robin_1);
|
|
|
|
val64 = 0x0103000502010007ULL;
|
|
|
|
writeq(val64, &bar0->tx_w_round_robin_2);
|
|
|
|
val64 = 0x0304010002060500ULL;
|
|
|
|
writeq(val64, &bar0->tx_w_round_robin_3);
|
|
|
|
val64 = 0x0103020400000000ULL;
|
|
|
|
writeq(val64, &bar0->tx_w_round_robin_4);
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Filling the Rx round robin registers as per the
|
|
|
|
* number of Rings and steering based on QoS.
|
|
|
|
*/
|
|
|
|
switch (config->rx_ring_num) {
|
|
|
|
case 1:
|
|
|
|
val64 = 0x8080808080808080ULL;
|
|
|
|
writeq(val64, &bar0->rts_qos_steering);
|
|
|
|
break;
|
|
|
|
case 2:
|
|
|
|
val64 = 0x0000010000010000ULL;
|
|
|
|
writeq(val64, &bar0->rx_w_round_robin_0);
|
|
|
|
val64 = 0x0100000100000100ULL;
|
|
|
|
writeq(val64, &bar0->rx_w_round_robin_1);
|
|
|
|
val64 = 0x0001000001000001ULL;
|
|
|
|
writeq(val64, &bar0->rx_w_round_robin_2);
|
|
|
|
val64 = 0x0000010000010000ULL;
|
|
|
|
writeq(val64, &bar0->rx_w_round_robin_3);
|
|
|
|
val64 = 0x0100000000000000ULL;
|
|
|
|
writeq(val64, &bar0->rx_w_round_robin_4);
|
|
|
|
|
|
|
|
val64 = 0x8080808040404040ULL;
|
|
|
|
writeq(val64, &bar0->rts_qos_steering);
|
|
|
|
break;
|
|
|
|
case 3:
|
|
|
|
val64 = 0x0001000102000001ULL;
|
|
|
|
writeq(val64, &bar0->rx_w_round_robin_0);
|
|
|
|
val64 = 0x0001020000010001ULL;
|
|
|
|
writeq(val64, &bar0->rx_w_round_robin_1);
|
|
|
|
val64 = 0x0200000100010200ULL;
|
|
|
|
writeq(val64, &bar0->rx_w_round_robin_2);
|
|
|
|
val64 = 0x0001000102000001ULL;
|
|
|
|
writeq(val64, &bar0->rx_w_round_robin_3);
|
|
|
|
val64 = 0x0001020000000000ULL;
|
|
|
|
writeq(val64, &bar0->rx_w_round_robin_4);
|
|
|
|
|
|
|
|
val64 = 0x8080804040402020ULL;
|
|
|
|
writeq(val64, &bar0->rts_qos_steering);
|
|
|
|
break;
|
|
|
|
case 4:
|
|
|
|
val64 = 0x0001020300010200ULL;
|
|
|
|
writeq(val64, &bar0->rx_w_round_robin_0);
|
|
|
|
val64 = 0x0100000102030001ULL;
|
|
|
|
writeq(val64, &bar0->rx_w_round_robin_1);
|
|
|
|
val64 = 0x0200010000010203ULL;
|
|
|
|
writeq(val64, &bar0->rx_w_round_robin_2);
|
|
|
|
val64 = 0x0001020001000001ULL;
|
|
|
|
writeq(val64, &bar0->rx_w_round_robin_3);
|
|
|
|
val64 = 0x0203000100000000ULL;
|
|
|
|
writeq(val64, &bar0->rx_w_round_robin_4);
|
|
|
|
|
|
|
|
val64 = 0x8080404020201010ULL;
|
|
|
|
writeq(val64, &bar0->rts_qos_steering);
|
|
|
|
break;
|
|
|
|
case 5:
|
|
|
|
val64 = 0x0001000203000102ULL;
|
|
|
|
writeq(val64, &bar0->rx_w_round_robin_0);
|
|
|
|
val64 = 0x0001020001030004ULL;
|
|
|
|
writeq(val64, &bar0->rx_w_round_robin_1);
|
|
|
|
val64 = 0x0001000203000102ULL;
|
|
|
|
writeq(val64, &bar0->rx_w_round_robin_2);
|
|
|
|
val64 = 0x0001020001030004ULL;
|
|
|
|
writeq(val64, &bar0->rx_w_round_robin_3);
|
|
|
|
val64 = 0x0001000000000000ULL;
|
|
|
|
writeq(val64, &bar0->rx_w_round_robin_4);
|
|
|
|
|
|
|
|
val64 = 0x8080404020201008ULL;
|
|
|
|
writeq(val64, &bar0->rts_qos_steering);
|
|
|
|
break;
|
|
|
|
case 6:
|
|
|
|
val64 = 0x0001020304000102ULL;
|
|
|
|
writeq(val64, &bar0->rx_w_round_robin_0);
|
|
|
|
val64 = 0x0304050001020001ULL;
|
|
|
|
writeq(val64, &bar0->rx_w_round_robin_1);
|
|
|
|
val64 = 0x0203000100000102ULL;
|
|
|
|
writeq(val64, &bar0->rx_w_round_robin_2);
|
|
|
|
val64 = 0x0304000102030405ULL;
|
|
|
|
writeq(val64, &bar0->rx_w_round_robin_3);
|
|
|
|
val64 = 0x0001000200000000ULL;
|
|
|
|
writeq(val64, &bar0->rx_w_round_robin_4);
|
|
|
|
|
|
|
|
val64 = 0x8080404020100804ULL;
|
|
|
|
writeq(val64, &bar0->rts_qos_steering);
|
|
|
|
break;
|
|
|
|
case 7:
|
|
|
|
val64 = 0x0001020001020300ULL;
|
|
|
|
writeq(val64, &bar0->rx_w_round_robin_0);
|
|
|
|
val64 = 0x0102030400010203ULL;
|
|
|
|
writeq(val64, &bar0->rx_w_round_robin_1);
|
|
|
|
val64 = 0x0405060001020001ULL;
|
|
|
|
writeq(val64, &bar0->rx_w_round_robin_2);
|
|
|
|
val64 = 0x0304050000010200ULL;
|
|
|
|
writeq(val64, &bar0->rx_w_round_robin_3);
|
|
|
|
val64 = 0x0102030000000000ULL;
|
|
|
|
writeq(val64, &bar0->rx_w_round_robin_4);
|
|
|
|
|
|
|
|
val64 = 0x8080402010080402ULL;
|
|
|
|
writeq(val64, &bar0->rts_qos_steering);
|
|
|
|
break;
|
|
|
|
case 8:
|
|
|
|
val64 = 0x0001020300040105ULL;
|
|
|
|
writeq(val64, &bar0->rx_w_round_robin_0);
|
|
|
|
val64 = 0x0200030106000204ULL;
|
|
|
|
writeq(val64, &bar0->rx_w_round_robin_1);
|
|
|
|
val64 = 0x0103000502010007ULL;
|
|
|
|
writeq(val64, &bar0->rx_w_round_robin_2);
|
|
|
|
val64 = 0x0304010002060500ULL;
|
|
|
|
writeq(val64, &bar0->rx_w_round_robin_3);
|
|
|
|
val64 = 0x0103020400000000ULL;
|
|
|
|
writeq(val64, &bar0->rx_w_round_robin_4);
|
|
|
|
|
|
|
|
val64 = 0x8040201008040201ULL;
|
|
|
|
writeq(val64, &bar0->rts_qos_steering);
|
|
|
|
break;
|
|
|
|
}
|
2005-04-16 16:20:36 -06:00
|
|
|
|
|
|
|
/* UDP Fix */
|
|
|
|
val64 = 0;
|
2005-08-03 13:24:33 -06:00
|
|
|
for (i = 0; i < 8; i++)
|
2005-04-16 16:20:36 -06:00
|
|
|
writeq(val64, &bar0->rts_frm_len_n[i]);
|
|
|
|
|
2005-08-03 13:27:09 -06:00
|
|
|
/* Set the default rts frame length for the rings configured */
|
|
|
|
val64 = MAC_RTS_FRM_LEN_SET(dev->mtu+22);
|
|
|
|
for (i = 0 ; i < config->rx_ring_num ; i++)
|
|
|
|
writeq(val64, &bar0->rts_frm_len_n[i]);
|
|
|
|
|
|
|
|
/* Set the frame length for the configured rings
|
|
|
|
* desired by the user
|
|
|
|
*/
|
|
|
|
for (i = 0; i < config->rx_ring_num; i++) {
|
|
|
|
/* If rts_frm_len[i] == 0 then it is assumed that user not
|
|
|
|
* specified frame length steering.
|
|
|
|
* If the user provides the frame length then program
|
|
|
|
* the rts_frm_len register for those values or else
|
|
|
|
* leave it as it is.
|
|
|
|
*/
|
|
|
|
if (rts_frm_len[i] != 0) {
|
|
|
|
writeq(MAC_RTS_FRM_LEN_SET(rts_frm_len[i]),
|
|
|
|
&bar0->rts_frm_len_n[i]);
|
|
|
|
}
|
|
|
|
}
|
2005-04-16 16:20:36 -06:00
|
|
|
|
2005-08-03 13:24:33 -06:00
|
|
|
/* Program statistics memory */
|
2005-04-16 16:20:36 -06:00
|
|
|
writeq(mac_control->stats_mem_phy, &bar0->stat_addr);
|
|
|
|
|
2005-08-03 13:24:33 -06:00
|
|
|
/*
|
2005-04-16 16:20:36 -06:00
|
|
|
* Initializing the sampling rate for the device to calculate the
|
|
|
|
* bandwidth utilization.
|
|
|
|
*/
|
|
|
|
val64 = MAC_TX_LINK_UTIL_VAL(tmac_util_period) |
|
|
|
|
MAC_RX_LINK_UTIL_VAL(rmac_util_period);
|
|
|
|
writeq(val64, &bar0->mac_link_util);
|
|
|
|
|
|
|
|
|
2005-08-03 13:24:33 -06:00
|
|
|
/*
|
|
|
|
* Initializing the Transmit and Receive Traffic Interrupt
|
2005-04-16 16:20:36 -06:00
|
|
|
* Scheme.
|
|
|
|
*/
|
2005-08-03 13:24:33 -06:00
|
|
|
/*
|
|
|
|
* TTI Initialization. Default Tx timer gets us about
|
2005-04-16 16:20:36 -06:00
|
|
|
* 250 interrupts per sec. Continuous interrupts are enabled
|
|
|
|
* by default.
|
|
|
|
*/
|
|
|
|
val64 = TTI_DATA1_MEM_TX_TIMER_VAL(0x2078) |
|
|
|
|
TTI_DATA1_MEM_TX_URNG_A(0xA) |
|
|
|
|
TTI_DATA1_MEM_TX_URNG_B(0x10) |
|
2005-08-03 13:27:09 -06:00
|
|
|
TTI_DATA1_MEM_TX_URNG_C(0x30) | TTI_DATA1_MEM_TX_TIMER_AC_EN;
|
|
|
|
if (use_continuous_tx_intrs)
|
|
|
|
val64 |= TTI_DATA1_MEM_TX_TIMER_CI_EN;
|
2005-04-16 16:20:36 -06:00
|
|
|
writeq(val64, &bar0->tti_data1_mem);
|
|
|
|
|
|
|
|
val64 = TTI_DATA2_MEM_TX_UFC_A(0x10) |
|
|
|
|
TTI_DATA2_MEM_TX_UFC_B(0x20) |
|
2005-08-03 13:27:09 -06:00
|
|
|
TTI_DATA2_MEM_TX_UFC_C(0x70) | TTI_DATA2_MEM_TX_UFC_D(0x80);
|
2005-04-16 16:20:36 -06:00
|
|
|
writeq(val64, &bar0->tti_data2_mem);
|
|
|
|
|
|
|
|
val64 = TTI_CMD_MEM_WE | TTI_CMD_MEM_STROBE_NEW_CMD;
|
|
|
|
writeq(val64, &bar0->tti_command_mem);
|
|
|
|
|
2005-08-03 13:24:33 -06:00
|
|
|
/*
|
2005-04-16 16:20:36 -06:00
|
|
|
* Once the operation completes, the Strobe bit of the command
|
|
|
|
* register will be reset. We poll for this particular condition
|
|
|
|
* We wait for a maximum of 500ms for the operation to complete,
|
|
|
|
* if it's not complete by then we return error.
|
|
|
|
*/
|
|
|
|
time = 0;
|
|
|
|
while (TRUE) {
|
|
|
|
val64 = readq(&bar0->tti_command_mem);
|
|
|
|
if (!(val64 & TTI_CMD_MEM_STROBE_NEW_CMD)) {
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
if (time > 10) {
|
|
|
|
DBG_PRINT(ERR_DBG, "%s: TTI init Failed\n",
|
|
|
|
dev->name);
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
msleep(50);
|
|
|
|
time++;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* RTI Initialization */
|
|
|
|
val64 = RTI_DATA1_MEM_RX_TIMER_VAL(0xFFF) |
|
|
|
|
RTI_DATA1_MEM_RX_URNG_A(0xA) |
|
|
|
|
RTI_DATA1_MEM_RX_URNG_B(0x10) |
|
|
|
|
RTI_DATA1_MEM_RX_URNG_C(0x30) | RTI_DATA1_MEM_RX_TIMER_AC_EN;
|
|
|
|
|
|
|
|
writeq(val64, &bar0->rti_data1_mem);
|
|
|
|
|
|
|
|
val64 = RTI_DATA2_MEM_RX_UFC_A(0x1) |
|
|
|
|
RTI_DATA2_MEM_RX_UFC_B(0x2) |
|
|
|
|
RTI_DATA2_MEM_RX_UFC_C(0x40) | RTI_DATA2_MEM_RX_UFC_D(0x80);
|
|
|
|
writeq(val64, &bar0->rti_data2_mem);
|
|
|
|
|
|
|
|
val64 = RTI_CMD_MEM_WE | RTI_CMD_MEM_STROBE_NEW_CMD;
|
|
|
|
writeq(val64, &bar0->rti_command_mem);
|
|
|
|
|
2005-08-03 13:24:33 -06:00
|
|
|
/*
|
2005-08-03 13:27:09 -06:00
|
|
|
* Once the operation completes, the Strobe bit of the
|
|
|
|
* command register will be reset. We poll for this
|
|
|
|
* particular condition. We wait for a maximum of 500ms
|
|
|
|
* for the operation to complete, if it's not complete
|
|
|
|
* by then we return error.
|
2005-04-16 16:20:36 -06:00
|
|
|
*/
|
|
|
|
time = 0;
|
|
|
|
while (TRUE) {
|
|
|
|
val64 = readq(&bar0->rti_command_mem);
|
2005-08-03 13:24:33 -06:00
|
|
|
if (!(val64 & RTI_CMD_MEM_STROBE_NEW_CMD)) {
|
2005-04-16 16:20:36 -06:00
|
|
|
break;
|
|
|
|
}
|
|
|
|
if (time > 10) {
|
|
|
|
DBG_PRINT(ERR_DBG, "%s: RTI init Failed\n",
|
|
|
|
dev->name);
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
time++;
|
|
|
|
msleep(50);
|
|
|
|
}
|
|
|
|
|
2005-08-03 13:24:33 -06:00
|
|
|
/*
|
|
|
|
* Initializing proper values as Pause threshold into all
|
2005-04-16 16:20:36 -06:00
|
|
|
* the 8 Queues on Rx side.
|
|
|
|
*/
|
|
|
|
writeq(0xffbbffbbffbbffbbULL, &bar0->mc_pause_thresh_q0q3);
|
|
|
|
writeq(0xffbbffbbffbbffbbULL, &bar0->mc_pause_thresh_q4q7);
|
|
|
|
|
|
|
|
/* Disable RMAC PAD STRIPPING */
|
2005-08-03 13:24:33 -06:00
|
|
|
add = (void *) &bar0->mac_cfg;
|
2005-04-16 16:20:36 -06:00
|
|
|
val64 = readq(&bar0->mac_cfg);
|
|
|
|
val64 &= ~(MAC_CFG_RMAC_STRIP_PAD);
|
|
|
|
writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key);
|
|
|
|
writel((u32) (val64), add);
|
|
|
|
writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key);
|
|
|
|
writel((u32) (val64 >> 32), (add + 4));
|
|
|
|
val64 = readq(&bar0->mac_cfg);
|
|
|
|
|
2005-08-03 13:24:33 -06:00
|
|
|
/*
|
|
|
|
* Set the time value to be inserted in the pause frame
|
2005-04-16 16:20:36 -06:00
|
|
|
* generated by xena.
|
|
|
|
*/
|
|
|
|
val64 = readq(&bar0->rmac_pause_cfg);
|
|
|
|
val64 &= ~(RMAC_PAUSE_HG_PTIME(0xffff));
|
|
|
|
val64 |= RMAC_PAUSE_HG_PTIME(nic->mac_control.rmac_pause_time);
|
|
|
|
writeq(val64, &bar0->rmac_pause_cfg);
|
|
|
|
|
2005-08-03 13:24:33 -06:00
|
|
|
/*
|
2005-04-16 16:20:36 -06:00
|
|
|
* Set the Threshold Limit for Generating the pause frame
|
|
|
|
* If the amount of data in any Queue exceeds ratio of
|
|
|
|
* (mac_control.mc_pause_threshold_q0q3 or q4q7)/256
|
|
|
|
* pause frame is generated
|
|
|
|
*/
|
|
|
|
val64 = 0;
|
|
|
|
for (i = 0; i < 4; i++) {
|
|
|
|
val64 |=
|
|
|
|
(((u64) 0xFF00 | nic->mac_control.
|
|
|
|
mc_pause_threshold_q0q3)
|
|
|
|
<< (i * 2 * 8));
|
|
|
|
}
|
|
|
|
writeq(val64, &bar0->mc_pause_thresh_q0q3);
|
|
|
|
|
|
|
|
val64 = 0;
|
|
|
|
for (i = 0; i < 4; i++) {
|
|
|
|
val64 |=
|
|
|
|
(((u64) 0xFF00 | nic->mac_control.
|
|
|
|
mc_pause_threshold_q4q7)
|
|
|
|
<< (i * 2 * 8));
|
|
|
|
}
|
|
|
|
writeq(val64, &bar0->mc_pause_thresh_q4q7);
|
|
|
|
|
2005-08-03 13:24:33 -06:00
|
|
|
/*
|
|
|
|
* TxDMA will stop Read request if the number of read split has
|
2005-04-16 16:20:36 -06:00
|
|
|
* exceeded the limit pointed by shared_splits
|
|
|
|
*/
|
|
|
|
val64 = readq(&bar0->pic_control);
|
|
|
|
val64 |= PIC_CNTL_SHARED_SPLITS(shared_splits);
|
|
|
|
writeq(val64, &bar0->pic_control);
|
|
|
|
|
|
|
|
return SUCCESS;
|
|
|
|
}
|
|
|
|
|
2005-08-03 13:24:33 -06:00
|
|
|
/**
|
|
|
|
* en_dis_able_nic_intrs - Enable or Disable the interrupts
|
2005-04-16 16:20:36 -06:00
|
|
|
* @nic: device private variable,
|
|
|
|
* @mask: A mask indicating which Intr block must be modified and,
|
|
|
|
* @flag: A flag indicating whether to enable or disable the Intrs.
|
|
|
|
* Description: This function will either disable or enable the interrupts
|
2005-08-03 13:24:33 -06:00
|
|
|
* depending on the flag argument. The mask argument can be used to
|
|
|
|
* enable/disable any Intr block.
|
2005-04-16 16:20:36 -06:00
|
|
|
* Return Value: NONE.
|
|
|
|
*/
|
|
|
|
|
|
|
|
static void en_dis_able_nic_intrs(struct s2io_nic *nic, u16 mask, int flag)
|
|
|
|
{
|
|
|
|
XENA_dev_config_t __iomem *bar0 = nic->bar0;
|
|
|
|
register u64 val64 = 0, temp64 = 0;
|
|
|
|
|
|
|
|
/* Top level interrupt classification */
|
|
|
|
/* PIC Interrupts */
|
|
|
|
if ((mask & (TX_PIC_INTR | RX_PIC_INTR))) {
|
|
|
|
/* Enable PIC Intrs in the general intr mask register */
|
|
|
|
val64 = TXPIC_INT_M | PIC_RX_INT_M;
|
|
|
|
if (flag == ENABLE_INTRS) {
|
|
|
|
temp64 = readq(&bar0->general_int_mask);
|
|
|
|
temp64 &= ~((u64) val64);
|
|
|
|
writeq(temp64, &bar0->general_int_mask);
|
2005-08-03 13:24:33 -06:00
|
|
|
/*
|
2005-04-16 16:20:36 -06:00
|
|
|
* Disabled all PCIX, Flash, MDIO, IIC and GPIO
|
2005-08-03 13:24:33 -06:00
|
|
|
* interrupts for now.
|
|
|
|
* TODO
|
2005-04-16 16:20:36 -06:00
|
|
|
*/
|
|
|
|
writeq(DISABLE_ALL_INTRS, &bar0->pic_int_mask);
|
2005-08-03 13:24:33 -06:00
|
|
|
/*
|
2005-04-16 16:20:36 -06:00
|
|
|
* No MSI Support is available presently, so TTI and
|
|
|
|
* RTI interrupts are also disabled.
|
|
|
|
*/
|
|
|
|
} else if (flag == DISABLE_INTRS) {
|
2005-08-03 13:24:33 -06:00
|
|
|
/*
|
|
|
|
* Disable PIC Intrs in the general
|
|
|
|
* intr mask register
|
2005-04-16 16:20:36 -06:00
|
|
|
*/
|
|
|
|
writeq(DISABLE_ALL_INTRS, &bar0->pic_int_mask);
|
|
|
|
temp64 = readq(&bar0->general_int_mask);
|
|
|
|
val64 |= temp64;
|
|
|
|
writeq(val64, &bar0->general_int_mask);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/* DMA Interrupts */
|
|
|
|
/* Enabling/Disabling Tx DMA interrupts */
|
|
|
|
if (mask & TX_DMA_INTR) {
|
|
|
|
/* Enable TxDMA Intrs in the general intr mask register */
|
|
|
|
val64 = TXDMA_INT_M;
|
|
|
|
if (flag == ENABLE_INTRS) {
|
|
|
|
temp64 = readq(&bar0->general_int_mask);
|
|
|
|
temp64 &= ~((u64) val64);
|
|
|
|
writeq(temp64, &bar0->general_int_mask);
|
2005-08-03 13:24:33 -06:00
|
|
|
/*
|
|
|
|
* Keep all interrupts other than PFC interrupt
|
2005-04-16 16:20:36 -06:00
|
|
|
* and PCC interrupt disabled in DMA level.
|
|
|
|
*/
|
|
|
|
val64 = DISABLE_ALL_INTRS & ~(TXDMA_PFC_INT_M |
|
|
|
|
TXDMA_PCC_INT_M);
|
|
|
|
writeq(val64, &bar0->txdma_int_mask);
|
2005-08-03 13:24:33 -06:00
|
|
|
/*
|
|
|
|
* Enable only the MISC error 1 interrupt in PFC block
|
2005-04-16 16:20:36 -06:00
|
|
|
*/
|
|
|
|
val64 = DISABLE_ALL_INTRS & (~PFC_MISC_ERR_1);
|
|
|
|
writeq(val64, &bar0->pfc_err_mask);
|
2005-08-03 13:24:33 -06:00
|
|
|
/*
|
|
|
|
* Enable only the FB_ECC error interrupt in PCC block
|
2005-04-16 16:20:36 -06:00
|
|
|
*/
|
|
|
|
val64 = DISABLE_ALL_INTRS & (~PCC_FB_ECC_ERR);
|
|
|
|
writeq(val64, &bar0->pcc_err_mask);
|
|
|
|
} else if (flag == DISABLE_INTRS) {
|
2005-08-03 13:24:33 -06:00
|
|
|
/*
|
|
|
|
* Disable TxDMA Intrs in the general intr mask
|
|
|
|
* register
|
2005-04-16 16:20:36 -06:00
|
|
|
*/
|
|
|
|
writeq(DISABLE_ALL_INTRS, &bar0->txdma_int_mask);
|
|
|
|
writeq(DISABLE_ALL_INTRS, &bar0->pfc_err_mask);
|
|
|
|
temp64 = readq(&bar0->general_int_mask);
|
|
|
|
val64 |= temp64;
|
|
|
|
writeq(val64, &bar0->general_int_mask);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Enabling/Disabling Rx DMA interrupts */
|
|
|
|
if (mask & RX_DMA_INTR) {
|
|
|
|
/* Enable RxDMA Intrs in the general intr mask register */
|
|
|
|
val64 = RXDMA_INT_M;
|
|
|
|
if (flag == ENABLE_INTRS) {
|
|
|
|
temp64 = readq(&bar0->general_int_mask);
|
|
|
|
temp64 &= ~((u64) val64);
|
|
|
|
writeq(temp64, &bar0->general_int_mask);
|
2005-08-03 13:24:33 -06:00
|
|
|
/*
|
|
|
|
* All RxDMA block interrupts are disabled for now
|
|
|
|
* TODO
|
2005-04-16 16:20:36 -06:00
|
|
|
*/
|
|
|
|
writeq(DISABLE_ALL_INTRS, &bar0->rxdma_int_mask);
|
|
|
|
} else if (flag == DISABLE_INTRS) {
|
2005-08-03 13:24:33 -06:00
|
|
|
/*
|
|
|
|
* Disable RxDMA Intrs in the general intr mask
|
|
|
|
* register
|
2005-04-16 16:20:36 -06:00
|
|
|
*/
|
|
|
|
writeq(DISABLE_ALL_INTRS, &bar0->rxdma_int_mask);
|
|
|
|
temp64 = readq(&bar0->general_int_mask);
|
|
|
|
val64 |= temp64;
|
|
|
|
writeq(val64, &bar0->general_int_mask);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/* MAC Interrupts */
|
|
|
|
/* Enabling/Disabling MAC interrupts */
|
|
|
|
if (mask & (TX_MAC_INTR | RX_MAC_INTR)) {
|
|
|
|
val64 = TXMAC_INT_M | RXMAC_INT_M;
|
|
|
|
if (flag == ENABLE_INTRS) {
|
|
|
|
temp64 = readq(&bar0->general_int_mask);
|
|
|
|
temp64 &= ~((u64) val64);
|
|
|
|
writeq(temp64, &bar0->general_int_mask);
|
2005-08-03 13:24:33 -06:00
|
|
|
/*
|
|
|
|
* All MAC block error interrupts are disabled for now
|
2005-04-16 16:20:36 -06:00
|
|
|
* except the link status change interrupt.
|
|
|
|
* TODO
|
|
|
|
*/
|
|
|
|
val64 = MAC_INT_STATUS_RMAC_INT;
|
|
|
|
temp64 = readq(&bar0->mac_int_mask);
|
|
|
|
temp64 &= ~((u64) val64);
|
|
|
|
writeq(temp64, &bar0->mac_int_mask);
|
|
|
|
|
|
|
|
val64 = readq(&bar0->mac_rmac_err_mask);
|
|
|
|
val64 &= ~((u64) RMAC_LINK_STATE_CHANGE_INT);
|
|
|
|
writeq(val64, &bar0->mac_rmac_err_mask);
|
|
|
|
} else if (flag == DISABLE_INTRS) {
|
2005-08-03 13:24:33 -06:00
|
|
|
/*
|
|
|
|
* Disable MAC Intrs in the general intr mask register
|
2005-04-16 16:20:36 -06:00
|
|
|
*/
|
|
|
|
writeq(DISABLE_ALL_INTRS, &bar0->mac_int_mask);
|
|
|
|
writeq(DISABLE_ALL_INTRS,
|
|
|
|
&bar0->mac_rmac_err_mask);
|
|
|
|
|
|
|
|
temp64 = readq(&bar0->general_int_mask);
|
|
|
|
val64 |= temp64;
|
|
|
|
writeq(val64, &bar0->general_int_mask);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/* XGXS Interrupts */
|
|
|
|
if (mask & (TX_XGXS_INTR | RX_XGXS_INTR)) {
|
|
|
|
val64 = TXXGXS_INT_M | RXXGXS_INT_M;
|
|
|
|
if (flag == ENABLE_INTRS) {
|
|
|
|
temp64 = readq(&bar0->general_int_mask);
|
|
|
|
temp64 &= ~((u64) val64);
|
|
|
|
writeq(temp64, &bar0->general_int_mask);
|
2005-08-03 13:24:33 -06:00
|
|
|
/*
|
2005-04-16 16:20:36 -06:00
|
|
|
* All XGXS block error interrupts are disabled for now
|
2005-08-03 13:24:33 -06:00
|
|
|
* TODO
|
2005-04-16 16:20:36 -06:00
|
|
|
*/
|
|
|
|
writeq(DISABLE_ALL_INTRS, &bar0->xgxs_int_mask);
|
|
|
|
} else if (flag == DISABLE_INTRS) {
|
2005-08-03 13:24:33 -06:00
|
|
|
/*
|
|
|
|
* Disable MC Intrs in the general intr mask register
|
2005-04-16 16:20:36 -06:00
|
|
|
*/
|
|
|
|
writeq(DISABLE_ALL_INTRS, &bar0->xgxs_int_mask);
|
|
|
|
temp64 = readq(&bar0->general_int_mask);
|
|
|
|
val64 |= temp64;
|
|
|
|
writeq(val64, &bar0->general_int_mask);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Memory Controller(MC) interrupts */
|
|
|
|
if (mask & MC_INTR) {
|
|
|
|
val64 = MC_INT_M;
|
|
|
|
if (flag == ENABLE_INTRS) {
|
|
|
|
temp64 = readq(&bar0->general_int_mask);
|
|
|
|
temp64 &= ~((u64) val64);
|
|
|
|
writeq(temp64, &bar0->general_int_mask);
|
2005-08-03 13:24:33 -06:00
|
|
|
/*
|
2005-08-03 13:27:09 -06:00
|
|
|
* Enable all MC Intrs.
|
2005-04-16 16:20:36 -06:00
|
|
|
*/
|
2005-08-03 13:27:09 -06:00
|
|
|
writeq(0x0, &bar0->mc_int_mask);
|
|
|
|
writeq(0x0, &bar0->mc_err_mask);
|
2005-04-16 16:20:36 -06:00
|
|
|
} else if (flag == DISABLE_INTRS) {
|
|
|
|
/*
|
|
|
|
* Disable MC Intrs in the general intr mask register
|
|
|
|
*/
|
|
|
|
writeq(DISABLE_ALL_INTRS, &bar0->mc_int_mask);
|
|
|
|
temp64 = readq(&bar0->general_int_mask);
|
|
|
|
val64 |= temp64;
|
|
|
|
writeq(val64, &bar0->general_int_mask);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
/* Tx traffic interrupts */
|
|
|
|
if (mask & TX_TRAFFIC_INTR) {
|
|
|
|
val64 = TXTRAFFIC_INT_M;
|
|
|
|
if (flag == ENABLE_INTRS) {
|
|
|
|
temp64 = readq(&bar0->general_int_mask);
|
|
|
|
temp64 &= ~((u64) val64);
|
|
|
|
writeq(temp64, &bar0->general_int_mask);
|
2005-08-03 13:24:33 -06:00
|
|
|
/*
|
2005-04-16 16:20:36 -06:00
|
|
|
* Enable all the Tx side interrupts
|
2005-08-03 13:24:33 -06:00
|
|
|
* writing 0 Enables all 64 TX interrupt levels
|
2005-04-16 16:20:36 -06:00
|
|
|
*/
|
|
|
|
writeq(0x0, &bar0->tx_traffic_mask);
|
|
|
|
} else if (flag == DISABLE_INTRS) {
|
2005-08-03 13:24:33 -06:00
|
|
|
/*
|
|
|
|
* Disable Tx Traffic Intrs in the general intr mask
|
2005-04-16 16:20:36 -06:00
|
|
|
* register.
|
|
|
|
*/
|
|
|
|
writeq(DISABLE_ALL_INTRS, &bar0->tx_traffic_mask);
|
|
|
|
temp64 = readq(&bar0->general_int_mask);
|
|
|
|
val64 |= temp64;
|
|
|
|
writeq(val64, &bar0->general_int_mask);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Rx traffic interrupts */
|
|
|
|
if (mask & RX_TRAFFIC_INTR) {
|
|
|
|
val64 = RXTRAFFIC_INT_M;
|
|
|
|
if (flag == ENABLE_INTRS) {
|
|
|
|
temp64 = readq(&bar0->general_int_mask);
|
|
|
|
temp64 &= ~((u64) val64);
|
|
|
|
writeq(temp64, &bar0->general_int_mask);
|
|
|
|
/* writing 0 Enables all 8 RX interrupt levels */
|
|
|
|
writeq(0x0, &bar0->rx_traffic_mask);
|
|
|
|
} else if (flag == DISABLE_INTRS) {
|
2005-08-03 13:24:33 -06:00
|
|
|
/*
|
|
|
|
* Disable Rx Traffic Intrs in the general intr mask
|
2005-04-16 16:20:36 -06:00
|
|
|
* register.
|
|
|
|
*/
|
|
|
|
writeq(DISABLE_ALL_INTRS, &bar0->rx_traffic_mask);
|
|
|
|
temp64 = readq(&bar0->general_int_mask);
|
|
|
|
val64 |= temp64;
|
|
|
|
writeq(val64, &bar0->general_int_mask);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2005-08-03 13:27:09 -06:00
|
|
|
static int check_prc_pcc_state(u64 val64, int flag, int rev_id)
|
2005-08-03 13:24:33 -06:00
|
|
|
{
|
|
|
|
int ret = 0;
|
|
|
|
|
|
|
|
if (flag == FALSE) {
|
2005-08-03 13:27:09 -06:00
|
|
|
if (rev_id >= 4) {
|
|
|
|
if (!(val64 & ADAPTER_STATUS_RMAC_PCC_IDLE) &&
|
|
|
|
((val64 & ADAPTER_STATUS_RC_PRC_QUIESCENT) ==
|
|
|
|
ADAPTER_STATUS_RC_PRC_QUIESCENT)) {
|
|
|
|
ret = 1;
|
|
|
|
}
|
|
|
|
} else {
|
|
|
|
if (!(val64 & ADAPTER_STATUS_RMAC_PCC_FOUR_IDLE) &&
|
|
|
|
((val64 & ADAPTER_STATUS_RC_PRC_QUIESCENT) ==
|
|
|
|
ADAPTER_STATUS_RC_PRC_QUIESCENT)) {
|
|
|
|
ret = 1;
|
|
|
|
}
|
2005-08-03 13:24:33 -06:00
|
|
|
}
|
|
|
|
} else {
|
2005-08-03 13:27:09 -06:00
|
|
|
if (rev_id >= 4) {
|
|
|
|
if (((val64 & ADAPTER_STATUS_RMAC_PCC_IDLE) ==
|
|
|
|
ADAPTER_STATUS_RMAC_PCC_IDLE) &&
|
|
|
|
(!(val64 & ADAPTER_STATUS_RC_PRC_QUIESCENT) ||
|
|
|
|
((val64 & ADAPTER_STATUS_RC_PRC_QUIESCENT) ==
|
|
|
|
ADAPTER_STATUS_RC_PRC_QUIESCENT))) {
|
|
|
|
ret = 1;
|
|
|
|
}
|
|
|
|
} else {
|
|
|
|
if (((val64 & ADAPTER_STATUS_RMAC_PCC_FOUR_IDLE) ==
|
|
|
|
ADAPTER_STATUS_RMAC_PCC_FOUR_IDLE) &&
|
|
|
|
(!(val64 & ADAPTER_STATUS_RC_PRC_QUIESCENT) ||
|
|
|
|
((val64 & ADAPTER_STATUS_RC_PRC_QUIESCENT) ==
|
|
|
|
ADAPTER_STATUS_RC_PRC_QUIESCENT))) {
|
|
|
|
ret = 1;
|
|
|
|
}
|
2005-08-03 13:24:33 -06:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
/**
|
|
|
|
* verify_xena_quiescence - Checks whether the H/W is ready
|
2005-04-16 16:20:36 -06:00
|
|
|
* @val64 : Value read from adapter status register.
|
|
|
|
* @flag : indicates if the adapter enable bit was ever written once
|
|
|
|
* before.
|
|
|
|
* Description: Returns whether the H/W is ready to go or not. Depending
|
2005-08-03 13:24:33 -06:00
|
|
|
* on whether adapter enable bit was written or not the comparison
|
2005-04-16 16:20:36 -06:00
|
|
|
* differs and the calling function passes the input argument flag to
|
|
|
|
* indicate this.
|
2005-08-03 13:24:33 -06:00
|
|
|
* Return: 1 If xena is quiescence
|
2005-04-16 16:20:36 -06:00
|
|
|
* 0 If Xena is not quiescence
|
|
|
|
*/
|
|
|
|
|
2005-08-03 13:24:33 -06:00
|
|
|
static int verify_xena_quiescence(nic_t *sp, u64 val64, int flag)
|
2005-04-16 16:20:36 -06:00
|
|
|
{
|
|
|
|
int ret = 0;
|
|
|
|
u64 tmp64 = ~((u64) val64);
|
2005-08-03 13:27:09 -06:00
|
|
|
int rev_id = get_xena_rev_id(sp->pdev);
|
2005-04-16 16:20:36 -06:00
|
|
|
|
|
|
|
if (!
|
|
|
|
(tmp64 &
|
|
|
|
(ADAPTER_STATUS_TDMA_READY | ADAPTER_STATUS_RDMA_READY |
|
|
|
|
ADAPTER_STATUS_PFC_READY | ADAPTER_STATUS_TMAC_BUF_EMPTY |
|
|
|
|
ADAPTER_STATUS_PIC_QUIESCENT | ADAPTER_STATUS_MC_DRAM_READY |
|
|
|
|
ADAPTER_STATUS_MC_QUEUES_READY | ADAPTER_STATUS_M_PLL_LOCK |
|
|
|
|
ADAPTER_STATUS_P_PLL_LOCK))) {
|
2005-08-03 13:27:09 -06:00
|
|
|
ret = check_prc_pcc_state(val64, flag, rev_id);
|
2005-04-16 16:20:36 -06:00
|
|
|
}
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* fix_mac_address - Fix for Mac addr problem on Alpha platforms
|
|
|
|
* @sp: Pointer to device specifc structure
|
2005-08-03 13:24:33 -06:00
|
|
|
* Description :
|
2005-04-16 16:20:36 -06:00
|
|
|
* New procedure to clear mac address reading problems on Alpha platforms
|
|
|
|
*
|
|
|
|
*/
|
|
|
|
|
2005-08-03 13:24:33 -06:00
|
|
|
void fix_mac_address(nic_t * sp)
|
2005-04-16 16:20:36 -06:00
|
|
|
{
|
|
|
|
XENA_dev_config_t __iomem *bar0 = sp->bar0;
|
|
|
|
u64 val64;
|
|
|
|
int i = 0;
|
|
|
|
|
|
|
|
while (fix_mac[i] != END_SIGN) {
|
|
|
|
writeq(fix_mac[i++], &bar0->gpio_control);
|
2005-08-03 13:24:33 -06:00
|
|
|
udelay(10);
|
2005-04-16 16:20:36 -06:00
|
|
|
val64 = readq(&bar0->gpio_control);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
2005-08-03 13:24:33 -06:00
|
|
|
* start_nic - Turns the device on
|
2005-04-16 16:20:36 -06:00
|
|
|
* @nic : device private variable.
|
2005-08-03 13:24:33 -06:00
|
|
|
* Description:
|
|
|
|
* This function actually turns the device on. Before this function is
|
|
|
|
* called,all Registers are configured from their reset states
|
|
|
|
* and shared memory is allocated but the NIC is still quiescent. On
|
2005-04-16 16:20:36 -06:00
|
|
|
* calling this function, the device interrupts are cleared and the NIC is
|
|
|
|
* literally switched on by writing into the adapter control register.
|
2005-08-03 13:24:33 -06:00
|
|
|
* Return Value:
|
2005-04-16 16:20:36 -06:00
|
|
|
* SUCCESS on success and -1 on failure.
|
|
|
|
*/
|
|
|
|
|
|
|
|
static int start_nic(struct s2io_nic *nic)
|
|
|
|
{
|
|
|
|
XENA_dev_config_t __iomem *bar0 = nic->bar0;
|
|
|
|
struct net_device *dev = nic->dev;
|
|
|
|
register u64 val64 = 0;
|
2005-08-03 13:24:33 -06:00
|
|
|
u16 interruptible;
|
|
|
|
u16 subid, i;
|
2005-04-16 16:20:36 -06:00
|
|
|
mac_info_t *mac_control;
|
|
|
|
struct config_param *config;
|
|
|
|
|
|
|
|
mac_control = &nic->mac_control;
|
|
|
|
config = &nic->config;
|
|
|
|
|
|
|
|
/* PRC Initialization and configuration */
|
|
|
|
for (i = 0; i < config->rx_ring_num; i++) {
|
2005-08-03 13:24:33 -06:00
|
|
|
writeq((u64) mac_control->rings[i].rx_blocks[0].block_dma_addr,
|
2005-04-16 16:20:36 -06:00
|
|
|
&bar0->prc_rxd0_n[i]);
|
|
|
|
|
|
|
|
val64 = readq(&bar0->prc_ctrl_n[i]);
|
|
|
|
#ifndef CONFIG_2BUFF_MODE
|
|
|
|
val64 |= PRC_CTRL_RC_ENABLED;
|
|
|
|
#else
|
|
|
|
val64 |= PRC_CTRL_RC_ENABLED | PRC_CTRL_RING_MODE_3;
|
|
|
|
#endif
|
|
|
|
writeq(val64, &bar0->prc_ctrl_n[i]);
|
|
|
|
}
|
|
|
|
|
|
|
|
#ifdef CONFIG_2BUFF_MODE
|
|
|
|
/* Enabling 2 buffer mode by writing into Rx_pa_cfg reg. */
|
|
|
|
val64 = readq(&bar0->rx_pa_cfg);
|
|
|
|
val64 |= RX_PA_CFG_IGNORE_L2_ERR;
|
|
|
|
writeq(val64, &bar0->rx_pa_cfg);
|
|
|
|
#endif
|
|
|
|
|
2005-08-03 13:24:33 -06:00
|
|
|
/*
|
2005-04-16 16:20:36 -06:00
|
|
|
* Enabling MC-RLDRAM. After enabling the device, we timeout
|
|
|
|
* for around 100ms, which is approximately the time required
|
|
|
|
* for the device to be ready for operation.
|
|
|
|
*/
|
|
|
|
val64 = readq(&bar0->mc_rldram_mrs);
|
|
|
|
val64 |= MC_RLDRAM_QUEUE_SIZE_ENABLE | MC_RLDRAM_MRS_ENABLE;
|
|
|
|
SPECIAL_REG_WRITE(val64, &bar0->mc_rldram_mrs, UF);
|
|
|
|
val64 = readq(&bar0->mc_rldram_mrs);
|
|
|
|
|
2005-08-03 13:24:33 -06:00
|
|
|
msleep(100); /* Delay by around 100 ms. */
|
2005-04-16 16:20:36 -06:00
|
|
|
|
|
|
|
/* Enabling ECC Protection. */
|
|
|
|
val64 = readq(&bar0->adapter_control);
|
|
|
|
val64 &= ~ADAPTER_ECC_EN;
|
|
|
|
writeq(val64, &bar0->adapter_control);
|
|
|
|
|
2005-08-03 13:24:33 -06:00
|
|
|
/*
|
|
|
|
* Clearing any possible Link state change interrupts that
|
2005-04-16 16:20:36 -06:00
|
|
|
* could have popped up just before Enabling the card.
|
|
|
|
*/
|
|
|
|
val64 = readq(&bar0->mac_rmac_err_reg);
|
|
|
|
if (val64)
|
|
|
|
writeq(val64, &bar0->mac_rmac_err_reg);
|
|
|
|
|
2005-08-03 13:24:33 -06:00
|
|
|
/*
|
|
|
|
* Verify if the device is ready to be enabled, if so enable
|
2005-04-16 16:20:36 -06:00
|
|
|
* it.
|
|
|
|
*/
|
|
|
|
val64 = readq(&bar0->adapter_status);
|
2005-08-03 13:24:33 -06:00
|
|
|
if (!verify_xena_quiescence(nic, val64, nic->device_enabled_once)) {
|
2005-04-16 16:20:36 -06:00
|
|
|
DBG_PRINT(ERR_DBG, "%s: device is not ready, ", dev->name);
|
|
|
|
DBG_PRINT(ERR_DBG, "Adapter status reads: 0x%llx\n",
|
|
|
|
(unsigned long long) val64);
|
|
|
|
return FAILURE;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Enable select interrupts */
|
|
|
|
interruptible = TX_TRAFFIC_INTR | RX_TRAFFIC_INTR | TX_MAC_INTR |
|
2005-08-03 13:27:09 -06:00
|
|
|
RX_MAC_INTR | MC_INTR;
|
2005-04-16 16:20:36 -06:00
|
|
|
en_dis_able_nic_intrs(nic, interruptible, ENABLE_INTRS);
|
|
|
|
|
2005-08-03 13:24:33 -06:00
|
|
|
/*
|
2005-04-16 16:20:36 -06:00
|
|
|
* With some switches, link might be already up at this point.
|
2005-08-03 13:24:33 -06:00
|
|
|
* Because of this weird behavior, when we enable laser,
|
|
|
|
* we may not get link. We need to handle this. We cannot
|
|
|
|
* figure out which switch is misbehaving. So we are forced to
|
|
|
|
* make a global change.
|
2005-04-16 16:20:36 -06:00
|
|
|
*/
|
|
|
|
|
|
|
|
/* Enabling Laser. */
|
|
|
|
val64 = readq(&bar0->adapter_control);
|
|
|
|
val64 |= ADAPTER_EOI_TX_ON;
|
|
|
|
writeq(val64, &bar0->adapter_control);
|
|
|
|
|
|
|
|
/* SXE-002: Initialize link and activity LED */
|
|
|
|
subid = nic->pdev->subsystem_device;
|
|
|
|
if ((subid & 0xFF) >= 0x07) {
|
|
|
|
val64 = readq(&bar0->gpio_control);
|
|
|
|
val64 |= 0x0000800000000000ULL;
|
|
|
|
writeq(val64, &bar0->gpio_control);
|
|
|
|
val64 = 0x0411040400000000ULL;
|
2005-08-03 13:24:33 -06:00
|
|
|
writeq(val64, (void __iomem *) ((u8 *) bar0 + 0x2700));
|
2005-04-16 16:20:36 -06:00
|
|
|
}
|
|
|
|
|
2005-08-03 13:24:33 -06:00
|
|
|
/*
|
|
|
|
* Don't see link state interrupts on certain switches, so
|
2005-04-16 16:20:36 -06:00
|
|
|
* directly scheduling a link state task from here.
|
|
|
|
*/
|
|
|
|
schedule_work(&nic->set_link_task);
|
|
|
|
|
|
|
|
return SUCCESS;
|
|
|
|
}
|
|
|
|
|
2005-08-03 13:24:33 -06:00
|
|
|
/**
|
|
|
|
* free_tx_buffers - Free all queued Tx buffers
|
2005-04-16 16:20:36 -06:00
|
|
|
* @nic : device private variable.
|
2005-08-03 13:24:33 -06:00
|
|
|
* Description:
|
2005-04-16 16:20:36 -06:00
|
|
|
* Free all queued Tx buffers.
|
2005-08-03 13:24:33 -06:00
|
|
|
* Return Value: void
|
2005-04-16 16:20:36 -06:00
|
|
|
*/
|
|
|
|
|
|
|
|
static void free_tx_buffers(struct s2io_nic *nic)
|
|
|
|
{
|
|
|
|
struct net_device *dev = nic->dev;
|
|
|
|
struct sk_buff *skb;
|
|
|
|
TxD_t *txdp;
|
|
|
|
int i, j;
|
|
|
|
mac_info_t *mac_control;
|
|
|
|
struct config_param *config;
|
2005-08-03 13:30:43 -06:00
|
|
|
int cnt = 0, frg_cnt;
|
2005-04-16 16:20:36 -06:00
|
|
|
|
|
|
|
mac_control = &nic->mac_control;
|
|
|
|
config = &nic->config;
|
|
|
|
|
|
|
|
for (i = 0; i < config->tx_fifo_num; i++) {
|
|
|
|
for (j = 0; j < config->tx_cfg[i].fifo_len - 1; j++) {
|
2005-08-03 13:24:33 -06:00
|
|
|
txdp = (TxD_t *) mac_control->fifos[i].list_info[j].
|
2005-04-16 16:20:36 -06:00
|
|
|
list_virt_addr;
|
|
|
|
skb =
|
|
|
|
(struct sk_buff *) ((unsigned long) txdp->
|
|
|
|
Host_Control);
|
|
|
|
if (skb == NULL) {
|
2005-08-03 13:30:43 -06:00
|
|
|
memset(txdp, 0, sizeof(TxD_t) *
|
|
|
|
config->max_txds);
|
2005-04-16 16:20:36 -06:00
|
|
|
continue;
|
|
|
|
}
|
2005-08-03 13:30:43 -06:00
|
|
|
frg_cnt = skb_shinfo(skb)->nr_frags;
|
|
|
|
pci_unmap_single(nic->pdev, (dma_addr_t)
|
|
|
|
txdp->Buffer_Pointer,
|
|
|
|
skb->len - skb->data_len,
|
|
|
|
PCI_DMA_TODEVICE);
|
|
|
|
if (frg_cnt) {
|
|
|
|
TxD_t *temp;
|
|
|
|
temp = txdp;
|
|
|
|
txdp++;
|
|
|
|
for (j = 0; j < frg_cnt; j++, txdp++) {
|
|
|
|
skb_frag_t *frag =
|
|
|
|
&skb_shinfo(skb)->frags[j];
|
|
|
|
pci_unmap_page(nic->pdev,
|
|
|
|
(dma_addr_t)
|
|
|
|
txdp->
|
|
|
|
Buffer_Pointer,
|
|
|
|
frag->size,
|
|
|
|
PCI_DMA_TODEVICE);
|
|
|
|
}
|
|
|
|
txdp = temp;
|
|
|
|
}
|
2005-04-16 16:20:36 -06:00
|
|
|
dev_kfree_skb(skb);
|
2005-08-03 13:30:43 -06:00
|
|
|
memset(txdp, 0, sizeof(TxD_t) * config->max_txds);
|
2005-04-16 16:20:36 -06:00
|
|
|
cnt++;
|
|
|
|
}
|
|
|
|
DBG_PRINT(INTR_DBG,
|
|
|
|
"%s:forcibly freeing %d skbs on FIFO%d\n",
|
|
|
|
dev->name, cnt, i);
|
2005-08-03 13:24:33 -06:00
|
|
|
mac_control->fifos[i].tx_curr_get_info.offset = 0;
|
|
|
|
mac_control->fifos[i].tx_curr_put_info.offset = 0;
|
2005-04-16 16:20:36 -06:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2005-08-03 13:24:33 -06:00
|
|
|
/**
|
|
|
|
* stop_nic - To stop the nic
|
2005-04-16 16:20:36 -06:00
|
|
|
* @nic ; device private variable.
|
2005-08-03 13:24:33 -06:00
|
|
|
* Description:
|
|
|
|
* This function does exactly the opposite of what the start_nic()
|
2005-04-16 16:20:36 -06:00
|
|
|
* function does. This function is called to stop the device.
|
|
|
|
* Return Value:
|
|
|
|
* void.
|
|
|
|
*/
|
|
|
|
|
|
|
|
static void stop_nic(struct s2io_nic *nic)
|
|
|
|
{
|
|
|
|
XENA_dev_config_t __iomem *bar0 = nic->bar0;
|
|
|
|
register u64 val64 = 0;
|
|
|
|
u16 interruptible, i;
|
|
|
|
mac_info_t *mac_control;
|
|
|
|
struct config_param *config;
|
|
|
|
|
|
|
|
mac_control = &nic->mac_control;
|
|
|
|
config = &nic->config;
|
|
|
|
|
|
|
|
/* Disable all interrupts */
|
|
|
|
interruptible = TX_TRAFFIC_INTR | RX_TRAFFIC_INTR | TX_MAC_INTR |
|
2005-08-03 13:27:09 -06:00
|
|
|
RX_MAC_INTR | MC_INTR;
|
2005-04-16 16:20:36 -06:00
|
|
|
en_dis_able_nic_intrs(nic, interruptible, DISABLE_INTRS);
|
|
|
|
|
|
|
|
/* Disable PRCs */
|
|
|
|
for (i = 0; i < config->rx_ring_num; i++) {
|
|
|
|
val64 = readq(&bar0->prc_ctrl_n[i]);
|
|
|
|
val64 &= ~((u64) PRC_CTRL_RC_ENABLED);
|
|
|
|
writeq(val64, &bar0->prc_ctrl_n[i]);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2005-08-03 13:24:33 -06:00
|
|
|
/**
|
|
|
|
* fill_rx_buffers - Allocates the Rx side skbs
|
2005-04-16 16:20:36 -06:00
|
|
|
* @nic: device private variable
|
2005-08-03 13:24:33 -06:00
|
|
|
* @ring_no: ring number
|
|
|
|
* Description:
|
2005-04-16 16:20:36 -06:00
|
|
|
* The function allocates Rx side skbs and puts the physical
|
|
|
|
* address of these buffers into the RxD buffer pointers, so that the NIC
|
|
|
|
* can DMA the received frame into these locations.
|
|
|
|
* The NIC supports 3 receive modes, viz
|
|
|
|
* 1. single buffer,
|
|
|
|
* 2. three buffer and
|
|
|
|
* 3. Five buffer modes.
|
2005-08-03 13:24:33 -06:00
|
|
|
* Each mode defines how many fragments the received frame will be split
|
|
|
|
* up into by the NIC. The frame is split into L3 header, L4 Header,
|
2005-04-16 16:20:36 -06:00
|
|
|
* L4 payload in three buffer mode and in 5 buffer mode, L4 payload itself
|
|
|
|
* is split into 3 fragments. As of now only single buffer mode is
|
|
|
|
* supported.
|
|
|
|
* Return Value:
|
|
|
|
* SUCCESS on success or an appropriate -ve value on failure.
|
|
|
|
*/
|
|
|
|
|
2005-08-03 13:24:33 -06:00
|
|
|
int fill_rx_buffers(struct s2io_nic *nic, int ring_no)
|
2005-04-16 16:20:36 -06:00
|
|
|
{
|
|
|
|
struct net_device *dev = nic->dev;
|
|
|
|
struct sk_buff *skb;
|
|
|
|
RxD_t *rxdp;
|
|
|
|
int off, off1, size, block_no, block_no1;
|
|
|
|
int offset, offset1;
|
|
|
|
u32 alloc_tab = 0;
|
2005-08-03 13:24:33 -06:00
|
|
|
u32 alloc_cnt;
|
2005-04-16 16:20:36 -06:00
|
|
|
mac_info_t *mac_control;
|
|
|
|
struct config_param *config;
|
|
|
|
#ifdef CONFIG_2BUFF_MODE
|
|
|
|
RxD_t *rxdpnext;
|
|
|
|
int nextblk;
|
2005-08-03 13:24:33 -06:00
|
|
|
u64 tmp;
|
2005-04-16 16:20:36 -06:00
|
|
|
buffAdd_t *ba;
|
|
|
|
dma_addr_t rxdpphys;
|
|
|
|
#endif
|
|
|
|
#ifndef CONFIG_S2IO_NAPI
|
|
|
|
unsigned long flags;
|
|
|
|
#endif
|
|
|
|
|
|
|
|
mac_control = &nic->mac_control;
|
|
|
|
config = &nic->config;
|
2005-08-03 13:24:33 -06:00
|
|
|
alloc_cnt = mac_control->rings[ring_no].pkt_cnt -
|
|
|
|
atomic_read(&nic->rx_bufs_left[ring_no]);
|
2005-04-16 16:20:36 -06:00
|
|
|
size = dev->mtu + HEADER_ETHERNET_II_802_3_SIZE +
|
|
|
|
HEADER_802_2_SIZE + HEADER_SNAP_SIZE;
|
|
|
|
|
|
|
|
while (alloc_tab < alloc_cnt) {
|
2005-08-03 13:24:33 -06:00
|
|
|
block_no = mac_control->rings[ring_no].rx_curr_put_info.
|
2005-04-16 16:20:36 -06:00
|
|
|
block_index;
|
2005-08-03 13:24:33 -06:00
|
|
|
block_no1 = mac_control->rings[ring_no].rx_curr_get_info.
|
2005-04-16 16:20:36 -06:00
|
|
|
block_index;
|
2005-08-03 13:24:33 -06:00
|
|
|
off = mac_control->rings[ring_no].rx_curr_put_info.offset;
|
|
|
|
off1 = mac_control->rings[ring_no].rx_curr_get_info.offset;
|
2005-04-16 16:20:36 -06:00
|
|
|
#ifndef CONFIG_2BUFF_MODE
|
|
|
|
offset = block_no * (MAX_RXDS_PER_BLOCK + 1) + off;
|
|
|
|
offset1 = block_no1 * (MAX_RXDS_PER_BLOCK + 1) + off1;
|
|
|
|
#else
|
|
|
|
offset = block_no * (MAX_RXDS_PER_BLOCK) + off;
|
|
|
|
offset1 = block_no1 * (MAX_RXDS_PER_BLOCK) + off1;
|
|
|
|
#endif
|
|
|
|
|
2005-08-03 13:24:33 -06:00
|
|
|
rxdp = mac_control->rings[ring_no].rx_blocks[block_no].
|
2005-04-16 16:20:36 -06:00
|
|
|
block_virt_addr + off;
|
|
|
|
if ((offset == offset1) && (rxdp->Host_Control)) {
|
|
|
|
DBG_PRINT(INTR_DBG, "%s: Get and Put", dev->name);
|
|
|
|
DBG_PRINT(INTR_DBG, " info equated\n");
|
|
|
|
goto end;
|
|
|
|
}
|
|
|
|
#ifndef CONFIG_2BUFF_MODE
|
|
|
|
if (rxdp->Control_1 == END_OF_BLOCK) {
|
2005-08-03 13:24:33 -06:00
|
|
|
mac_control->rings[ring_no].rx_curr_put_info.
|
2005-04-16 16:20:36 -06:00
|
|
|
block_index++;
|
2005-08-03 13:24:33 -06:00
|
|
|
mac_control->rings[ring_no].rx_curr_put_info.
|
|
|
|
block_index %= mac_control->rings[ring_no].block_count;
|
|
|
|
block_no = mac_control->rings[ring_no].rx_curr_put_info.
|
|
|
|
block_index;
|
2005-04-16 16:20:36 -06:00
|
|
|
off++;
|
|
|
|
off %= (MAX_RXDS_PER_BLOCK + 1);
|
2005-08-03 13:24:33 -06:00
|
|
|
mac_control->rings[ring_no].rx_curr_put_info.offset =
|
2005-04-16 16:20:36 -06:00
|
|
|
off;
|
|
|
|
rxdp = (RxD_t *) ((unsigned long) rxdp->Control_2);
|
|
|
|
DBG_PRINT(INTR_DBG, "%s: Next block at: %p\n",
|
|
|
|
dev->name, rxdp);
|
|
|
|
}
|
|
|
|
#ifndef CONFIG_S2IO_NAPI
|
|
|
|
spin_lock_irqsave(&nic->put_lock, flags);
|
2005-08-03 13:24:33 -06:00
|
|
|
mac_control->rings[ring_no].put_pos =
|
2005-04-16 16:20:36 -06:00
|
|
|
(block_no * (MAX_RXDS_PER_BLOCK + 1)) + off;
|
|
|
|
spin_unlock_irqrestore(&nic->put_lock, flags);
|
|
|
|
#endif
|
|
|
|
#else
|
|
|
|
if (rxdp->Host_Control == END_OF_BLOCK) {
|
2005-08-03 13:24:33 -06:00
|
|
|
mac_control->rings[ring_no].rx_curr_put_info.
|
2005-04-16 16:20:36 -06:00
|
|
|
block_index++;
|
2005-08-03 13:24:33 -06:00
|
|
|
mac_control->rings[ring_no].rx_curr_put_info.block_index
|
|
|
|
%= mac_control->rings[ring_no].block_count;
|
|
|
|
block_no = mac_control->rings[ring_no].rx_curr_put_info
|
|
|
|
.block_index;
|
2005-04-16 16:20:36 -06:00
|
|
|
off = 0;
|
|
|
|
DBG_PRINT(INTR_DBG, "%s: block%d at: 0x%llx\n",
|
|
|
|
dev->name, block_no,
|
|
|
|
(unsigned long long) rxdp->Control_1);
|
2005-08-03 13:24:33 -06:00
|
|
|
mac_control->rings[ring_no].rx_curr_put_info.offset =
|
2005-04-16 16:20:36 -06:00
|
|
|
off;
|
2005-08-03 13:24:33 -06:00
|
|
|
rxdp = mac_control->rings[ring_no].rx_blocks[block_no].
|
2005-04-16 16:20:36 -06:00
|
|
|
block_virt_addr;
|
|
|
|
}
|
|
|
|
#ifndef CONFIG_S2IO_NAPI
|
|
|
|
spin_lock_irqsave(&nic->put_lock, flags);
|
2005-08-03 13:24:33 -06:00
|
|
|
mac_control->rings[ring_no].put_pos = (block_no *
|
2005-04-16 16:20:36 -06:00
|
|
|
(MAX_RXDS_PER_BLOCK + 1)) + off;
|
|
|
|
spin_unlock_irqrestore(&nic->put_lock, flags);
|
|
|
|
#endif
|
|
|
|
#endif
|
|
|
|
|
|
|
|
#ifndef CONFIG_2BUFF_MODE
|
|
|
|
if (rxdp->Control_1 & RXD_OWN_XENA)
|
|
|
|
#else
|
|
|
|
if (rxdp->Control_2 & BIT(0))
|
|
|
|
#endif
|
|
|
|
{
|
2005-08-03 13:24:33 -06:00
|
|
|
mac_control->rings[ring_no].rx_curr_put_info.
|
2005-04-16 16:20:36 -06:00
|
|
|
offset = off;
|
|
|
|
goto end;
|
|
|
|
}
|
|
|
|
#ifdef CONFIG_2BUFF_MODE
|
2005-08-03 13:24:33 -06:00
|
|
|
/*
|
|
|
|
* RxDs Spanning cache lines will be replenished only
|
|
|
|
* if the succeeding RxD is also owned by Host. It
|
|
|
|
* will always be the ((8*i)+3) and ((8*i)+6)
|
|
|
|
* descriptors for the 48 byte descriptor. The offending
|
2005-04-16 16:20:36 -06:00
|
|
|
* decsriptor is of-course the 3rd descriptor.
|
|
|
|
*/
|
2005-08-03 13:24:33 -06:00
|
|
|
rxdpphys = mac_control->rings[ring_no].rx_blocks[block_no].
|
2005-04-16 16:20:36 -06:00
|
|
|
block_dma_addr + (off * sizeof(RxD_t));
|
|
|
|
if (((u64) (rxdpphys)) % 128 > 80) {
|
2005-08-03 13:24:33 -06:00
|
|
|
rxdpnext = mac_control->rings[ring_no].rx_blocks[block_no].
|
2005-04-16 16:20:36 -06:00
|
|
|
block_virt_addr + (off + 1);
|
|
|
|
if (rxdpnext->Host_Control == END_OF_BLOCK) {
|
|
|
|
nextblk = (block_no + 1) %
|
2005-08-03 13:24:33 -06:00
|
|
|
(mac_control->rings[ring_no].block_count);
|
|
|
|
rxdpnext = mac_control->rings[ring_no].rx_blocks
|
2005-04-16 16:20:36 -06:00
|
|
|
[nextblk].block_virt_addr;
|
|
|
|
}
|
|
|
|
if (rxdpnext->Control_2 & BIT(0))
|
|
|
|
goto end;
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
|
|
|
|
#ifndef CONFIG_2BUFF_MODE
|
|
|
|
skb = dev_alloc_skb(size + NET_IP_ALIGN);
|
|
|
|
#else
|
|
|
|
skb = dev_alloc_skb(dev->mtu + ALIGN_SIZE + BUF0_LEN + 4);
|
|
|
|
#endif
|
|
|
|
if (!skb) {
|
|
|
|
DBG_PRINT(ERR_DBG, "%s: Out of ", dev->name);
|
|
|
|
DBG_PRINT(ERR_DBG, "memory to allocate SKBs\n");
|
|
|
|
return -ENOMEM;
|
|
|
|
}
|
|
|
|
#ifndef CONFIG_2BUFF_MODE
|
|
|
|
skb_reserve(skb, NET_IP_ALIGN);
|
|
|
|
memset(rxdp, 0, sizeof(RxD_t));
|
|
|
|
rxdp->Buffer0_ptr = pci_map_single
|
|
|
|
(nic->pdev, skb->data, size, PCI_DMA_FROMDEVICE);
|
|
|
|
rxdp->Control_2 &= (~MASK_BUFFER0_SIZE);
|
|
|
|
rxdp->Control_2 |= SET_BUFFER0_SIZE(size);
|
|
|
|
rxdp->Host_Control = (unsigned long) (skb);
|
|
|
|
rxdp->Control_1 |= RXD_OWN_XENA;
|
|
|
|
off++;
|
|
|
|
off %= (MAX_RXDS_PER_BLOCK + 1);
|
2005-08-03 13:24:33 -06:00
|
|
|
mac_control->rings[ring_no].rx_curr_put_info.offset = off;
|
2005-04-16 16:20:36 -06:00
|
|
|
#else
|
2005-08-03 13:24:33 -06:00
|
|
|
ba = &mac_control->rings[ring_no].ba[block_no][off];
|
2005-04-16 16:20:36 -06:00
|
|
|
skb_reserve(skb, BUF0_LEN);
|
2005-06-28 16:25:31 -06:00
|
|
|
tmp = ((unsigned long) skb->data & ALIGN_SIZE);
|
|
|
|
if (tmp)
|
|
|
|
skb_reserve(skb, (ALIGN_SIZE + 1) - tmp);
|
2005-04-16 16:20:36 -06:00
|
|
|
|
|
|
|
memset(rxdp, 0, sizeof(RxD_t));
|
|
|
|
rxdp->Buffer2_ptr = pci_map_single
|
|
|
|
(nic->pdev, skb->data, dev->mtu + BUF0_LEN + 4,
|
|
|
|
PCI_DMA_FROMDEVICE);
|
|
|
|
rxdp->Buffer0_ptr =
|
|
|
|
pci_map_single(nic->pdev, ba->ba_0, BUF0_LEN,
|
|
|
|
PCI_DMA_FROMDEVICE);
|
|
|
|
rxdp->Buffer1_ptr =
|
|
|
|
pci_map_single(nic->pdev, ba->ba_1, BUF1_LEN,
|
|
|
|
PCI_DMA_FROMDEVICE);
|
|
|
|
|
|
|
|
rxdp->Control_2 = SET_BUFFER2_SIZE(dev->mtu + 4);
|
|
|
|
rxdp->Control_2 |= SET_BUFFER0_SIZE(BUF0_LEN);
|
|
|
|
rxdp->Control_2 |= SET_BUFFER1_SIZE(1); /* dummy. */
|
|
|
|
rxdp->Control_2 |= BIT(0); /* Set Buffer_Empty bit. */
|
|
|
|
rxdp->Host_Control = (u64) ((unsigned long) (skb));
|
|
|
|
rxdp->Control_1 |= RXD_OWN_XENA;
|
|
|
|
off++;
|
2005-08-03 13:24:33 -06:00
|
|
|
mac_control->rings[ring_no].rx_curr_put_info.offset = off;
|
2005-04-16 16:20:36 -06:00
|
|
|
#endif
|
2005-08-03 13:27:09 -06:00
|
|
|
rxdp->Control_2 |= SET_RXD_MARKER;
|
2005-08-03 13:24:33 -06:00
|
|
|
|
2005-04-16 16:20:36 -06:00
|
|
|
atomic_inc(&nic->rx_bufs_left[ring_no]);
|
|
|
|
alloc_tab++;
|
|
|
|
}
|
|
|
|
|
|
|
|
end:
|
|
|
|
return SUCCESS;
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
2005-08-03 13:24:33 -06:00
|
|
|
* free_rx_buffers - Frees all Rx buffers
|
2005-04-16 16:20:36 -06:00
|
|
|
* @sp: device private variable.
|
2005-08-03 13:24:33 -06:00
|
|
|
* Description:
|
2005-04-16 16:20:36 -06:00
|
|
|
* This function will free all Rx buffers allocated by host.
|
|
|
|
* Return Value:
|
|
|
|
* NONE.
|
|
|
|
*/
|
|
|
|
|
|
|
|
static void free_rx_buffers(struct s2io_nic *sp)
|
|
|
|
{
|
|
|
|
struct net_device *dev = sp->dev;
|
|
|
|
int i, j, blk = 0, off, buf_cnt = 0;
|
|
|
|
RxD_t *rxdp;
|
|
|
|
struct sk_buff *skb;
|
|
|
|
mac_info_t *mac_control;
|
|
|
|
struct config_param *config;
|
|
|
|
#ifdef CONFIG_2BUFF_MODE
|
|
|
|
buffAdd_t *ba;
|
|
|
|
#endif
|
|
|
|
|
|
|
|
mac_control = &sp->mac_control;
|
|
|
|
config = &sp->config;
|
|
|
|
|
|
|
|
for (i = 0; i < config->rx_ring_num; i++) {
|
|
|
|
for (j = 0, blk = 0; j < config->rx_cfg[i].num_rxd; j++) {
|
|
|
|
off = j % (MAX_RXDS_PER_BLOCK + 1);
|
2005-08-03 13:24:33 -06:00
|
|
|
rxdp = mac_control->rings[i].rx_blocks[blk].
|
|
|
|
block_virt_addr + off;
|
2005-04-16 16:20:36 -06:00
|
|
|
|
|
|
|
#ifndef CONFIG_2BUFF_MODE
|
|
|
|
if (rxdp->Control_1 == END_OF_BLOCK) {
|
|
|
|
rxdp =
|
|
|
|
(RxD_t *) ((unsigned long) rxdp->
|
|
|
|
Control_2);
|
|
|
|
j++;
|
|
|
|
blk++;
|
|
|
|
}
|
|
|
|
#else
|
|
|
|
if (rxdp->Host_Control == END_OF_BLOCK) {
|
|
|
|
blk++;
|
|
|
|
continue;
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
|
|
|
|
if (!(rxdp->Control_1 & RXD_OWN_XENA)) {
|
|
|
|
memset(rxdp, 0, sizeof(RxD_t));
|
|
|
|
continue;
|
|
|
|
}
|
|
|
|
|
|
|
|
skb =
|
|
|
|
(struct sk_buff *) ((unsigned long) rxdp->
|
|
|
|
Host_Control);
|
|
|
|
if (skb) {
|
|
|
|
#ifndef CONFIG_2BUFF_MODE
|
|
|
|
pci_unmap_single(sp->pdev, (dma_addr_t)
|
|
|
|
rxdp->Buffer0_ptr,
|
|
|
|
dev->mtu +
|
|
|
|
HEADER_ETHERNET_II_802_3_SIZE
|
|
|
|
+ HEADER_802_2_SIZE +
|
|
|
|
HEADER_SNAP_SIZE,
|
|
|
|
PCI_DMA_FROMDEVICE);
|
|
|
|
#else
|
2005-08-03 13:24:33 -06:00
|
|
|
ba = &mac_control->rings[i].ba[blk][off];
|
2005-04-16 16:20:36 -06:00
|
|
|
pci_unmap_single(sp->pdev, (dma_addr_t)
|
|
|
|
rxdp->Buffer0_ptr,
|
|
|
|
BUF0_LEN,
|
|
|
|
PCI_DMA_FROMDEVICE);
|
|
|
|
pci_unmap_single(sp->pdev, (dma_addr_t)
|
|
|
|
rxdp->Buffer1_ptr,
|
|
|
|
BUF1_LEN,
|
|
|
|
PCI_DMA_FROMDEVICE);
|
|
|
|
pci_unmap_single(sp->pdev, (dma_addr_t)
|
|
|
|
rxdp->Buffer2_ptr,
|
|
|
|
dev->mtu + BUF0_LEN + 4,
|
|
|
|
PCI_DMA_FROMDEVICE);
|
|
|
|
#endif
|
|
|
|
dev_kfree_skb(skb);
|
|
|
|
atomic_dec(&sp->rx_bufs_left[i]);
|
|
|
|
buf_cnt++;
|
|
|
|
}
|
|
|
|
memset(rxdp, 0, sizeof(RxD_t));
|
|
|
|
}
|
2005-08-03 13:24:33 -06:00
|
|
|
mac_control->rings[i].rx_curr_put_info.block_index = 0;
|
|
|
|
mac_control->rings[i].rx_curr_get_info.block_index = 0;
|
|
|
|
mac_control->rings[i].rx_curr_put_info.offset = 0;
|
|
|
|
mac_control->rings[i].rx_curr_get_info.offset = 0;
|
2005-04-16 16:20:36 -06:00
|
|
|
atomic_set(&sp->rx_bufs_left[i], 0);
|
|
|
|
DBG_PRINT(INIT_DBG, "%s:Freed 0x%x Rx Buffers on ring%d\n",
|
|
|
|
dev->name, buf_cnt, i);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* s2io_poll - Rx interrupt handler for NAPI support
|
|
|
|
* @dev : pointer to the device structure.
|
2005-08-03 13:24:33 -06:00
|
|
|
* @budget : The number of packets that were budgeted to be processed
|
2005-04-16 16:20:36 -06:00
|
|
|
* during one pass through the 'Poll" function.
|
|
|
|
* Description:
|
|
|
|
* Comes into picture only if NAPI support has been incorporated. It does
|
|
|
|
* the same thing that rx_intr_handler does, but not in a interrupt context
|
|
|
|
* also It will process only a given number of packets.
|
|
|
|
* Return value:
|
|
|
|
* 0 on success and 1 if there are No Rx packets to be processed.
|
|
|
|
*/
|
|
|
|
|
2005-08-03 13:24:33 -06:00
|
|
|
#if defined(CONFIG_S2IO_NAPI)
|
2005-04-16 16:20:36 -06:00
|
|
|
static int s2io_poll(struct net_device *dev, int *budget)
|
|
|
|
{
|
|
|
|
nic_t *nic = dev->priv;
|
2005-08-03 13:24:33 -06:00
|
|
|
int pkt_cnt = 0, org_pkts_to_process;
|
2005-04-16 16:20:36 -06:00
|
|
|
mac_info_t *mac_control;
|
|
|
|
struct config_param *config;
|
2005-08-03 13:24:33 -06:00
|
|
|
XENA_dev_config_t *bar0 = (XENA_dev_config_t *) nic->bar0;
|
|
|
|
u64 val64;
|
|
|
|
int i;
|
2005-04-16 16:20:36 -06:00
|
|
|
|
2005-08-03 13:29:20 -06:00
|
|
|
atomic_inc(&nic->isr_cnt);
|
2005-04-16 16:20:36 -06:00
|
|
|
mac_control = &nic->mac_control;
|
|
|
|
config = &nic->config;
|
|
|
|
|
2005-08-03 13:24:33 -06:00
|
|
|
nic->pkts_to_process = *budget;
|
|
|
|
if (nic->pkts_to_process > dev->quota)
|
|
|
|
nic->pkts_to_process = dev->quota;
|
|
|
|
org_pkts_to_process = nic->pkts_to_process;
|
2005-04-16 16:20:36 -06:00
|
|
|
|
|
|
|
val64 = readq(&bar0->rx_traffic_int);
|
|
|
|
writeq(val64, &bar0->rx_traffic_int);
|
|
|
|
|
|
|
|
for (i = 0; i < config->rx_ring_num; i++) {
|
2005-08-03 13:24:33 -06:00
|
|
|
rx_intr_handler(&mac_control->rings[i]);
|
|
|
|
pkt_cnt = org_pkts_to_process - nic->pkts_to_process;
|
|
|
|
if (!nic->pkts_to_process) {
|
|
|
|
/* Quota for the current iteration has been met */
|
|
|
|
goto no_rx;
|
2005-04-16 16:20:36 -06:00
|
|
|
}
|
|
|
|
}
|
|
|
|
if (!pkt_cnt)
|
|
|
|
pkt_cnt = 1;
|
|
|
|
|
|
|
|
dev->quota -= pkt_cnt;
|
|
|
|
*budget -= pkt_cnt;
|
|
|
|
netif_rx_complete(dev);
|
|
|
|
|
|
|
|
for (i = 0; i < config->rx_ring_num; i++) {
|
|
|
|
if (fill_rx_buffers(nic, i) == -ENOMEM) {
|
|
|
|
DBG_PRINT(ERR_DBG, "%s:Out of memory", dev->name);
|
|
|
|
DBG_PRINT(ERR_DBG, " in Rx Poll!!\n");
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
/* Re enable the Rx interrupts. */
|
|
|
|
en_dis_able_nic_intrs(nic, RX_TRAFFIC_INTR, ENABLE_INTRS);
|
2005-08-03 13:29:20 -06:00
|
|
|
atomic_dec(&nic->isr_cnt);
|
2005-04-16 16:20:36 -06:00
|
|
|
return 0;
|
|
|
|
|
2005-08-03 13:24:33 -06:00
|
|
|
no_rx:
|
2005-04-16 16:20:36 -06:00
|
|
|
dev->quota -= pkt_cnt;
|
|
|
|
*budget -= pkt_cnt;
|
|
|
|
|
|
|
|
for (i = 0; i < config->rx_ring_num; i++) {
|
|
|
|
if (fill_rx_buffers(nic, i) == -ENOMEM) {
|
|
|
|
DBG_PRINT(ERR_DBG, "%s:Out of memory", dev->name);
|
|
|
|
DBG_PRINT(ERR_DBG, " in Rx Poll!!\n");
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
2005-08-03 13:29:20 -06:00
|
|
|
atomic_dec(&nic->isr_cnt);
|
2005-04-16 16:20:36 -06:00
|
|
|
return 1;
|
|
|
|
}
|
2005-08-03 13:24:33 -06:00
|
|
|
#endif
|
|
|
|
|
|
|
|
/**
|
2005-04-16 16:20:36 -06:00
|
|
|
* rx_intr_handler - Rx interrupt handler
|
|
|
|
* @nic: device private variable.
|
2005-08-03 13:24:33 -06:00
|
|
|
* Description:
|
|
|
|
* If the interrupt is because of a received frame or if the
|
2005-04-16 16:20:36 -06:00
|
|
|
* receive ring contains fresh as yet un-processed frames,this function is
|
2005-08-03 13:24:33 -06:00
|
|
|
* called. It picks out the RxD at which place the last Rx processing had
|
|
|
|
* stopped and sends the skb to the OSM's Rx handler and then increments
|
2005-04-16 16:20:36 -06:00
|
|
|
* the offset.
|
|
|
|
* Return Value:
|
|
|
|
* NONE.
|
|
|
|
*/
|
2005-08-03 13:24:33 -06:00
|
|
|
static void rx_intr_handler(ring_info_t *ring_data)
|
2005-04-16 16:20:36 -06:00
|
|
|
{
|
2005-08-03 13:24:33 -06:00
|
|
|
nic_t *nic = ring_data->nic;
|
2005-04-16 16:20:36 -06:00
|
|
|
struct net_device *dev = (struct net_device *) nic->dev;
|
2005-08-03 13:24:33 -06:00
|
|
|
int get_block, get_offset, put_block, put_offset, ring_bufs;
|
2005-04-16 16:20:36 -06:00
|
|
|
rx_curr_get_info_t get_info, put_info;
|
|
|
|
RxD_t *rxdp;
|
|
|
|
struct sk_buff *skb;
|
2005-08-03 13:24:33 -06:00
|
|
|
#ifndef CONFIG_S2IO_NAPI
|
|
|
|
int pkt_cnt = 0;
|
2005-04-16 16:20:36 -06:00
|
|
|
#endif
|
2005-08-03 13:29:20 -06:00
|
|
|
spin_lock(&nic->rx_lock);
|
|
|
|
if (atomic_read(&nic->card_state) == CARD_DOWN) {
|
|
|
|
DBG_PRINT(ERR_DBG, "%s: %s going down for reset\n",
|
|
|
|
__FUNCTION__, dev->name);
|
|
|
|
spin_unlock(&nic->rx_lock);
|
|
|
|
}
|
|
|
|
|
2005-08-03 13:24:33 -06:00
|
|
|
get_info = ring_data->rx_curr_get_info;
|
|
|
|
get_block = get_info.block_index;
|
|
|
|
put_info = ring_data->rx_curr_put_info;
|
|
|
|
put_block = put_info.block_index;
|
|
|
|
ring_bufs = get_info.ring_len+1;
|
|
|
|
rxdp = ring_data->rx_blocks[get_block].block_virt_addr +
|
2005-04-16 16:20:36 -06:00
|
|
|
get_info.offset;
|
2005-08-03 13:24:33 -06:00
|
|
|
get_offset = (get_block * (MAX_RXDS_PER_BLOCK + 1)) +
|
|
|
|
get_info.offset;
|
|
|
|
#ifndef CONFIG_S2IO_NAPI
|
|
|
|
spin_lock(&nic->put_lock);
|
|
|
|
put_offset = ring_data->put_pos;
|
|
|
|
spin_unlock(&nic->put_lock);
|
|
|
|
#else
|
|
|
|
put_offset = (put_block * (MAX_RXDS_PER_BLOCK + 1)) +
|
|
|
|
put_info.offset;
|
|
|
|
#endif
|
2005-08-03 13:27:09 -06:00
|
|
|
while (RXD_IS_UP2DT(rxdp) &&
|
|
|
|
(((get_offset + 1) % ring_bufs) != put_offset)) {
|
2005-08-03 13:24:33 -06:00
|
|
|
skb = (struct sk_buff *) ((unsigned long)rxdp->Host_Control);
|
|
|
|
if (skb == NULL) {
|
|
|
|
DBG_PRINT(ERR_DBG, "%s: The skb is ",
|
|
|
|
dev->name);
|
|
|
|
DBG_PRINT(ERR_DBG, "Null in Rx Intr\n");
|
2005-08-03 13:29:20 -06:00
|
|
|
spin_unlock(&nic->rx_lock);
|
2005-08-03 13:24:33 -06:00
|
|
|
return;
|
2005-04-16 16:20:36 -06:00
|
|
|
}
|
2005-08-03 13:24:33 -06:00
|
|
|
#ifndef CONFIG_2BUFF_MODE
|
|
|
|
pci_unmap_single(nic->pdev, (dma_addr_t)
|
|
|
|
rxdp->Buffer0_ptr,
|
|
|
|
dev->mtu +
|
|
|
|
HEADER_ETHERNET_II_802_3_SIZE +
|
|
|
|
HEADER_802_2_SIZE +
|
|
|
|
HEADER_SNAP_SIZE,
|
|
|
|
PCI_DMA_FROMDEVICE);
|
2005-04-16 16:20:36 -06:00
|
|
|
#else
|
2005-08-03 13:24:33 -06:00
|
|
|
pci_unmap_single(nic->pdev, (dma_addr_t)
|
|
|
|
rxdp->Buffer0_ptr,
|
|
|
|
BUF0_LEN, PCI_DMA_FROMDEVICE);
|
|
|
|
pci_unmap_single(nic->pdev, (dma_addr_t)
|
|
|
|
rxdp->Buffer1_ptr,
|
|
|
|
BUF1_LEN, PCI_DMA_FROMDEVICE);
|
|
|
|
pci_unmap_single(nic->pdev, (dma_addr_t)
|
|
|
|
rxdp->Buffer2_ptr,
|
|
|
|
dev->mtu + BUF0_LEN + 4,
|
|
|
|
PCI_DMA_FROMDEVICE);
|
|
|
|
#endif
|
|
|
|
rx_osm_handler(ring_data, rxdp);
|
|
|
|
get_info.offset++;
|
|
|
|
ring_data->rx_curr_get_info.offset =
|
2005-04-16 16:20:36 -06:00
|
|
|
get_info.offset;
|
2005-08-03 13:24:33 -06:00
|
|
|
rxdp = ring_data->rx_blocks[get_block].block_virt_addr +
|
|
|
|
get_info.offset;
|
|
|
|
if (get_info.offset &&
|
|
|
|
(!(get_info.offset % MAX_RXDS_PER_BLOCK))) {
|
|
|
|
get_info.offset = 0;
|
|
|
|
ring_data->rx_curr_get_info.offset
|
|
|
|
= get_info.offset;
|
|
|
|
get_block++;
|
|
|
|
get_block %= ring_data->block_count;
|
|
|
|
ring_data->rx_curr_get_info.block_index
|
|
|
|
= get_block;
|
|
|
|
rxdp = ring_data->rx_blocks[get_block].block_virt_addr;
|
|
|
|
}
|
2005-04-16 16:20:36 -06:00
|
|
|
|
2005-08-03 13:24:33 -06:00
|
|
|
get_offset = (get_block * (MAX_RXDS_PER_BLOCK + 1)) +
|
2005-04-16 16:20:36 -06:00
|
|
|
get_info.offset;
|
2005-08-03 13:24:33 -06:00
|
|
|
#ifdef CONFIG_S2IO_NAPI
|
|
|
|
nic->pkts_to_process -= 1;
|
|
|
|
if (!nic->pkts_to_process)
|
|
|
|
break;
|
|
|
|
#else
|
|
|
|
pkt_cnt++;
|
2005-04-16 16:20:36 -06:00
|
|
|
if ((indicate_max_pkts) && (pkt_cnt > indicate_max_pkts))
|
|
|
|
break;
|
2005-08-03 13:24:33 -06:00
|
|
|
#endif
|
2005-04-16 16:20:36 -06:00
|
|
|
}
|
2005-08-03 13:29:20 -06:00
|
|
|
spin_unlock(&nic->rx_lock);
|
2005-04-16 16:20:36 -06:00
|
|
|
}
|
2005-08-03 13:24:33 -06:00
|
|
|
|
|
|
|
/**
|
2005-04-16 16:20:36 -06:00
|
|
|
* tx_intr_handler - Transmit interrupt handler
|
|
|
|
* @nic : device private variable
|
2005-08-03 13:24:33 -06:00
|
|
|
* Description:
|
|
|
|
* If an interrupt was raised to indicate DMA complete of the
|
|
|
|
* Tx packet, this function is called. It identifies the last TxD
|
|
|
|
* whose buffer was freed and frees all skbs whose data have already
|
2005-04-16 16:20:36 -06:00
|
|
|
* DMA'ed into the NICs internal memory.
|
|
|
|
* Return Value:
|
|
|
|
* NONE
|
|
|
|
*/
|
|
|
|
|
2005-08-03 13:24:33 -06:00
|
|
|
static void tx_intr_handler(fifo_info_t *fifo_data)
|
2005-04-16 16:20:36 -06:00
|
|
|
{
|
2005-08-03 13:24:33 -06:00
|
|
|
nic_t *nic = fifo_data->nic;
|
2005-04-16 16:20:36 -06:00
|
|
|
struct net_device *dev = (struct net_device *) nic->dev;
|
|
|
|
tx_curr_get_info_t get_info, put_info;
|
|
|
|
struct sk_buff *skb;
|
|
|
|
TxD_t *txdlp;
|
|
|
|
u16 j, frg_cnt;
|
|
|
|
|
2005-08-03 13:24:33 -06:00
|
|
|
get_info = fifo_data->tx_curr_get_info;
|
|
|
|
put_info = fifo_data->tx_curr_put_info;
|
|
|
|
txdlp = (TxD_t *) fifo_data->list_info[get_info.offset].
|
|
|
|
list_virt_addr;
|
|
|
|
while ((!(txdlp->Control_1 & TXD_LIST_OWN_XENA)) &&
|
|
|
|
(get_info.offset != put_info.offset) &&
|
|
|
|
(txdlp->Host_Control)) {
|
|
|
|
/* Check for TxD errors */
|
|
|
|
if (txdlp->Control_1 & TXD_T_CODE) {
|
|
|
|
unsigned long long err;
|
|
|
|
err = txdlp->Control_1 & TXD_T_CODE;
|
|
|
|
DBG_PRINT(ERR_DBG, "***TxD error %llx\n",
|
|
|
|
err);
|
|
|
|
}
|
2005-04-16 16:20:36 -06:00
|
|
|
|
2005-08-03 13:24:33 -06:00
|
|
|
skb = (struct sk_buff *) ((unsigned long)
|
|
|
|
txdlp->Host_Control);
|
|
|
|
if (skb == NULL) {
|
|
|
|
DBG_PRINT(ERR_DBG, "%s: Null skb ",
|
|
|
|
__FUNCTION__);
|
|
|
|
DBG_PRINT(ERR_DBG, "in Tx Free Intr\n");
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
frg_cnt = skb_shinfo(skb)->nr_frags;
|
|
|
|
nic->tx_pkt_count++;
|
|
|
|
|
|
|
|
pci_unmap_single(nic->pdev, (dma_addr_t)
|
|
|
|
txdlp->Buffer_Pointer,
|
|
|
|
skb->len - skb->data_len,
|
|
|
|
PCI_DMA_TODEVICE);
|
|
|
|
if (frg_cnt) {
|
|
|
|
TxD_t *temp;
|
|
|
|
temp = txdlp;
|
|
|
|
txdlp++;
|
|
|
|
for (j = 0; j < frg_cnt; j++, txdlp++) {
|
|
|
|
skb_frag_t *frag =
|
|
|
|
&skb_shinfo(skb)->frags[j];
|
|
|
|
pci_unmap_page(nic->pdev,
|
|
|
|
(dma_addr_t)
|
|
|
|
txdlp->
|
|
|
|
Buffer_Pointer,
|
|
|
|
frag->size,
|
|
|
|
PCI_DMA_TODEVICE);
|
2005-04-16 16:20:36 -06:00
|
|
|
}
|
2005-08-03 13:24:33 -06:00
|
|
|
txdlp = temp;
|
2005-04-16 16:20:36 -06:00
|
|
|
}
|
2005-08-03 13:24:33 -06:00
|
|
|
memset(txdlp, 0,
|
|
|
|
(sizeof(TxD_t) * fifo_data->max_txds));
|
|
|
|
|
|
|
|
/* Updating the statistics block */
|
|
|
|
nic->stats.tx_bytes += skb->len;
|
|
|
|
dev_kfree_skb_irq(skb);
|
|
|
|
|
|
|
|
get_info.offset++;
|
|
|
|
get_info.offset %= get_info.fifo_len + 1;
|
|
|
|
txdlp = (TxD_t *) fifo_data->list_info
|
|
|
|
[get_info.offset].list_virt_addr;
|
|
|
|
fifo_data->tx_curr_get_info.offset =
|
|
|
|
get_info.offset;
|
2005-04-16 16:20:36 -06:00
|
|
|
}
|
|
|
|
|
|
|
|
spin_lock(&nic->tx_lock);
|
|
|
|
if (netif_queue_stopped(dev))
|
|
|
|
netif_wake_queue(dev);
|
|
|
|
spin_unlock(&nic->tx_lock);
|
|
|
|
}
|
|
|
|
|
2005-08-03 13:24:33 -06:00
|
|
|
/**
|
2005-04-16 16:20:36 -06:00
|
|
|
* alarm_intr_handler - Alarm Interrrupt handler
|
|
|
|
* @nic: device private variable
|
2005-08-03 13:24:33 -06:00
|
|
|
* Description: If the interrupt was neither because of Rx packet or Tx
|
2005-04-16 16:20:36 -06:00
|
|
|
* complete, this function is called. If the interrupt was to indicate
|
2005-08-03 13:24:33 -06:00
|
|
|
* a loss of link, the OSM link status handler is invoked for any other
|
|
|
|
* alarm interrupt the block that raised the interrupt is displayed
|
2005-04-16 16:20:36 -06:00
|
|
|
* and a H/W reset is issued.
|
|
|
|
* Return Value:
|
|
|
|
* NONE
|
|
|
|
*/
|
|
|
|
|
|
|
|
static void alarm_intr_handler(struct s2io_nic *nic)
|
|
|
|
{
|
|
|
|
struct net_device *dev = (struct net_device *) nic->dev;
|
|
|
|
XENA_dev_config_t __iomem *bar0 = nic->bar0;
|
|
|
|
register u64 val64 = 0, err_reg = 0;
|
|
|
|
|
|
|
|
/* Handling link status change error Intr */
|
|
|
|
err_reg = readq(&bar0->mac_rmac_err_reg);
|
|
|
|
writeq(err_reg, &bar0->mac_rmac_err_reg);
|
|
|
|
if (err_reg & RMAC_LINK_STATE_CHANGE_INT) {
|
|
|
|
schedule_work(&nic->set_link_task);
|
|
|
|
}
|
|
|
|
|
2005-08-03 13:27:09 -06:00
|
|
|
/* Handling Ecc errors */
|
|
|
|
val64 = readq(&bar0->mc_err_reg);
|
|
|
|
writeq(val64, &bar0->mc_err_reg);
|
|
|
|
if (val64 & (MC_ERR_REG_ECC_ALL_SNG | MC_ERR_REG_ECC_ALL_DBL)) {
|
|
|
|
if (val64 & MC_ERR_REG_ECC_ALL_DBL) {
|
2005-08-03 13:29:20 -06:00
|
|
|
nic->mac_control.stats_info->sw_stat.
|
|
|
|
double_ecc_errs++;
|
2005-08-03 13:27:09 -06:00
|
|
|
DBG_PRINT(ERR_DBG, "%s: Device indicates ",
|
|
|
|
dev->name);
|
|
|
|
DBG_PRINT(ERR_DBG, "double ECC error!!\n");
|
|
|
|
netif_stop_queue(dev);
|
|
|
|
schedule_work(&nic->rst_timer_task);
|
|
|
|
} else {
|
2005-08-03 13:29:20 -06:00
|
|
|
nic->mac_control.stats_info->sw_stat.
|
|
|
|
single_ecc_errs++;
|
2005-08-03 13:27:09 -06:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2005-04-16 16:20:36 -06:00
|
|
|
/* In case of a serious error, the device will be Reset. */
|
|
|
|
val64 = readq(&bar0->serr_source);
|
|
|
|
if (val64 & SERR_SOURCE_ANY) {
|
|
|
|
DBG_PRINT(ERR_DBG, "%s: Device indicates ", dev->name);
|
|
|
|
DBG_PRINT(ERR_DBG, "serious error!!\n");
|
|
|
|
netif_stop_queue(dev);
|
|
|
|
schedule_work(&nic->rst_timer_task);
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Also as mentioned in the latest Errata sheets if the PCC_FB_ECC
|
|
|
|
* Error occurs, the adapter will be recycled by disabling the
|
2005-08-03 13:24:33 -06:00
|
|
|
* adapter enable bit and enabling it again after the device
|
2005-04-16 16:20:36 -06:00
|
|
|
* becomes Quiescent.
|
|
|
|
*/
|
|
|
|
val64 = readq(&bar0->pcc_err_reg);
|
|
|
|
writeq(val64, &bar0->pcc_err_reg);
|
|
|
|
if (val64 & PCC_FB_ECC_DB_ERR) {
|
|
|
|
u64 ac = readq(&bar0->adapter_control);
|
|
|
|
ac &= ~(ADAPTER_CNTL_EN);
|
|
|
|
writeq(ac, &bar0->adapter_control);
|
|
|
|
ac = readq(&bar0->adapter_control);
|
|
|
|
schedule_work(&nic->set_link_task);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Other type of interrupts are not being handled now, TODO */
|
|
|
|
}
|
|
|
|
|
2005-08-03 13:24:33 -06:00
|
|
|
/**
|
2005-04-16 16:20:36 -06:00
|
|
|
* wait_for_cmd_complete - waits for a command to complete.
|
2005-08-03 13:24:33 -06:00
|
|
|
* @sp : private member of the device structure, which is a pointer to the
|
2005-04-16 16:20:36 -06:00
|
|
|
* s2io_nic structure.
|
2005-08-03 13:24:33 -06:00
|
|
|
* Description: Function that waits for a command to Write into RMAC
|
|
|
|
* ADDR DATA registers to be completed and returns either success or
|
|
|
|
* error depending on whether the command was complete or not.
|
2005-04-16 16:20:36 -06:00
|
|
|
* Return value:
|
|
|
|
* SUCCESS on success and FAILURE on failure.
|
|
|
|
*/
|
|
|
|
|
2005-08-03 13:24:33 -06:00
|
|
|
int wait_for_cmd_complete(nic_t * sp)
|
2005-04-16 16:20:36 -06:00
|
|
|
{
|
|
|
|
XENA_dev_config_t __iomem *bar0 = sp->bar0;
|
|
|
|
int ret = FAILURE, cnt = 0;
|
|
|
|
u64 val64;
|
|
|
|
|
|
|
|
while (TRUE) {
|
|
|
|
val64 = readq(&bar0->rmac_addr_cmd_mem);
|
|
|
|
if (!(val64 & RMAC_ADDR_CMD_MEM_STROBE_CMD_EXECUTING)) {
|
|
|
|
ret = SUCCESS;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
msleep(50);
|
|
|
|
if (cnt++ > 10)
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
2005-08-03 13:24:33 -06:00
|
|
|
/**
|
|
|
|
* s2io_reset - Resets the card.
|
2005-04-16 16:20:36 -06:00
|
|
|
* @sp : private member of the device structure.
|
|
|
|
* Description: Function to Reset the card. This function then also
|
2005-08-03 13:24:33 -06:00
|
|
|
* restores the previously saved PCI configuration space registers as
|
2005-04-16 16:20:36 -06:00
|
|
|
* the card reset also resets the configuration space.
|
|
|
|
* Return value:
|
|
|
|
* void.
|
|
|
|
*/
|
|
|
|
|
2005-08-03 13:24:33 -06:00
|
|
|
void s2io_reset(nic_t * sp)
|
2005-04-16 16:20:36 -06:00
|
|
|
{
|
|
|
|
XENA_dev_config_t __iomem *bar0 = sp->bar0;
|
|
|
|
u64 val64;
|
2005-08-03 13:27:09 -06:00
|
|
|
u16 subid, pci_cmd;
|
2005-04-16 16:20:36 -06:00
|
|
|
|
|
|
|
val64 = SW_RESET_ALL;
|
|
|
|
writeq(val64, &bar0->sw_reset);
|
|
|
|
|
2005-08-03 13:24:33 -06:00
|
|
|
/*
|
|
|
|
* At this stage, if the PCI write is indeed completed, the
|
|
|
|
* card is reset and so is the PCI Config space of the device.
|
|
|
|
* So a read cannot be issued at this stage on any of the
|
2005-04-16 16:20:36 -06:00
|
|
|
* registers to ensure the write into "sw_reset" register
|
|
|
|
* has gone through.
|
|
|
|
* Question: Is there any system call that will explicitly force
|
|
|
|
* all the write commands still pending on the bus to be pushed
|
|
|
|
* through?
|
|
|
|
* As of now I'am just giving a 250ms delay and hoping that the
|
|
|
|
* PCI write to sw_reset register is done by this time.
|
|
|
|
*/
|
|
|
|
msleep(250);
|
|
|
|
|
|
|
|
/* Restore the PCI state saved during initializarion. */
|
|
|
|
pci_restore_state(sp->pdev);
|
2005-08-03 13:24:33 -06:00
|
|
|
|
2005-04-16 16:20:36 -06:00
|
|
|
s2io_init_pci(sp);
|
|
|
|
|
|
|
|
msleep(250);
|
|
|
|
|
2005-08-03 13:24:33 -06:00
|
|
|
/* Set swapper to enable I/O register access */
|
|
|
|
s2io_set_swapper(sp);
|
|
|
|
|
2005-08-03 13:27:09 -06:00
|
|
|
/* Clear certain PCI/PCI-X fields after reset */
|
|
|
|
pci_read_config_word(sp->pdev, PCI_COMMAND, &pci_cmd);
|
|
|
|
pci_cmd &= 0x7FFF; /* Clear parity err detect bit */
|
|
|
|
pci_write_config_word(sp->pdev, PCI_COMMAND, pci_cmd);
|
|
|
|
|
|
|
|
val64 = readq(&bar0->txpic_int_reg);
|
|
|
|
val64 &= ~BIT(62); /* Clearing PCI_STATUS error reflected here */
|
|
|
|
writeq(val64, &bar0->txpic_int_reg);
|
|
|
|
|
|
|
|
/* Clearing PCIX Ecc status register */
|
|
|
|
pci_write_config_dword(sp->pdev, 0x68, 0);
|
|
|
|
|
2005-08-03 13:24:33 -06:00
|
|
|
/* Reset device statistics maintained by OS */
|
|
|
|
memset(&sp->stats, 0, sizeof (struct net_device_stats));
|
|
|
|
|
2005-04-16 16:20:36 -06:00
|
|
|
/* SXE-002: Configure link and activity LED to turn it off */
|
|
|
|
subid = sp->pdev->subsystem_device;
|
|
|
|
if ((subid & 0xFF) >= 0x07) {
|
|
|
|
val64 = readq(&bar0->gpio_control);
|
|
|
|
val64 |= 0x0000800000000000ULL;
|
|
|
|
writeq(val64, &bar0->gpio_control);
|
|
|
|
val64 = 0x0411040400000000ULL;
|
2005-08-03 13:24:33 -06:00
|
|
|
writeq(val64, (void __iomem *) ((u8 *) bar0 + 0x2700));
|
2005-04-16 16:20:36 -06:00
|
|
|
}
|
|
|
|
|
|
|
|
sp->device_enabled_once = FALSE;
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
2005-08-03 13:24:33 -06:00
|
|
|
* s2io_set_swapper - to set the swapper controle on the card
|
|
|
|
* @sp : private member of the device structure,
|
2005-04-16 16:20:36 -06:00
|
|
|
* pointer to the s2io_nic structure.
|
2005-08-03 13:24:33 -06:00
|
|
|
* Description: Function to set the swapper control on the card
|
2005-04-16 16:20:36 -06:00
|
|
|
* correctly depending on the 'endianness' of the system.
|
|
|
|
* Return value:
|
|
|
|
* SUCCESS on success and FAILURE on failure.
|
|
|
|
*/
|
|
|
|
|
2005-08-03 13:24:33 -06:00
|
|
|
int s2io_set_swapper(nic_t * sp)
|
2005-04-16 16:20:36 -06:00
|
|
|
{
|
|
|
|
struct net_device *dev = sp->dev;
|
|
|
|
XENA_dev_config_t __iomem *bar0 = sp->bar0;
|
|
|
|
u64 val64, valt, valr;
|
|
|
|
|
2005-08-03 13:24:33 -06:00
|
|
|
/*
|
2005-04-16 16:20:36 -06:00
|
|
|
* Set proper endian settings and verify the same by reading
|
|
|
|
* the PIF Feed-back register.
|
|
|
|
*/
|
|
|
|
|
|
|
|
val64 = readq(&bar0->pif_rd_swapper_fb);
|
|
|
|
if (val64 != 0x0123456789ABCDEFULL) {
|
|
|
|
int i = 0;
|
|
|
|
u64 value[] = { 0xC30000C3C30000C3ULL, /* FE=1, SE=1 */
|
|
|
|
0x8100008181000081ULL, /* FE=1, SE=0 */
|
|
|
|
0x4200004242000042ULL, /* FE=0, SE=1 */
|
|
|
|
0}; /* FE=0, SE=0 */
|
|
|
|
|
|
|
|
while(i<4) {
|
|
|
|
writeq(value[i], &bar0->swapper_ctrl);
|
|
|
|
val64 = readq(&bar0->pif_rd_swapper_fb);
|
|
|
|
if (val64 == 0x0123456789ABCDEFULL)
|
|
|
|
break;
|
|
|
|
i++;
|
|
|
|
}
|
|
|
|
if (i == 4) {
|
|
|
|
DBG_PRINT(ERR_DBG, "%s: Endian settings are wrong, ",
|
|
|
|
dev->name);
|
|
|
|
DBG_PRINT(ERR_DBG, "feedback read %llx\n",
|
|
|
|
(unsigned long long) val64);
|
|
|
|
return FAILURE;
|
|
|
|
}
|
|
|
|
valr = value[i];
|
|
|
|
} else {
|
|
|
|
valr = readq(&bar0->swapper_ctrl);
|
|
|
|
}
|
|
|
|
|
|
|
|
valt = 0x0123456789ABCDEFULL;
|
|
|
|
writeq(valt, &bar0->xmsi_address);
|
|
|
|
val64 = readq(&bar0->xmsi_address);
|
|
|
|
|
|
|
|
if(val64 != valt) {
|
|
|
|
int i = 0;
|
|
|
|
u64 value[] = { 0x00C3C30000C3C300ULL, /* FE=1, SE=1 */
|
|
|
|
0x0081810000818100ULL, /* FE=1, SE=0 */
|
|
|
|
0x0042420000424200ULL, /* FE=0, SE=1 */
|
|
|
|
0}; /* FE=0, SE=0 */
|
|
|
|
|
|
|
|
while(i<4) {
|
|
|
|
writeq((value[i] | valr), &bar0->swapper_ctrl);
|
|
|
|
writeq(valt, &bar0->xmsi_address);
|
|
|
|
val64 = readq(&bar0->xmsi_address);
|
|
|
|
if(val64 == valt)
|
|
|
|
break;
|
|
|
|
i++;
|
|
|
|
}
|
|
|
|
if(i == 4) {
|
2005-08-03 13:24:33 -06:00
|
|
|
unsigned long long x = val64;
|
2005-04-16 16:20:36 -06:00
|
|
|
DBG_PRINT(ERR_DBG, "Write failed, Xmsi_addr ");
|
2005-08-03 13:24:33 -06:00
|
|
|
DBG_PRINT(ERR_DBG, "reads:0x%llx\n", x);
|
2005-04-16 16:20:36 -06:00
|
|
|
return FAILURE;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
val64 = readq(&bar0->swapper_ctrl);
|
|
|
|
val64 &= 0xFFFF000000000000ULL;
|
|
|
|
|
|
|
|
#ifdef __BIG_ENDIAN
|
2005-08-03 13:24:33 -06:00
|
|
|
/*
|
|
|
|
* The device by default set to a big endian format, so a
|
2005-04-16 16:20:36 -06:00
|
|
|
* big endian driver need not set anything.
|
|
|
|
*/
|
|
|
|
val64 |= (SWAPPER_CTRL_TXP_FE |
|
|
|
|
SWAPPER_CTRL_TXP_SE |
|
|
|
|
SWAPPER_CTRL_TXD_R_FE |
|
|
|
|
SWAPPER_CTRL_TXD_W_FE |
|
|
|
|
SWAPPER_CTRL_TXF_R_FE |
|
|
|
|
SWAPPER_CTRL_RXD_R_FE |
|
|
|
|
SWAPPER_CTRL_RXD_W_FE |
|
|
|
|
SWAPPER_CTRL_RXF_W_FE |
|
|
|
|
SWAPPER_CTRL_XMSI_FE |
|
|
|
|
SWAPPER_CTRL_XMSI_SE |
|
|
|
|
SWAPPER_CTRL_STATS_FE | SWAPPER_CTRL_STATS_SE);
|
|
|
|
writeq(val64, &bar0->swapper_ctrl);
|
|
|
|
#else
|
2005-08-03 13:24:33 -06:00
|
|
|
/*
|
2005-04-16 16:20:36 -06:00
|
|
|
* Initially we enable all bits to make it accessible by the
|
2005-08-03 13:24:33 -06:00
|
|
|
* driver, then we selectively enable only those bits that
|
2005-04-16 16:20:36 -06:00
|
|
|
* we want to set.
|
|
|
|
*/
|
|
|
|
val64 |= (SWAPPER_CTRL_TXP_FE |
|
|
|
|
SWAPPER_CTRL_TXP_SE |
|
|
|
|
SWAPPER_CTRL_TXD_R_FE |
|
|
|
|
SWAPPER_CTRL_TXD_R_SE |
|
|
|
|
SWAPPER_CTRL_TXD_W_FE |
|
|
|
|
SWAPPER_CTRL_TXD_W_SE |
|
|
|
|
SWAPPER_CTRL_TXF_R_FE |
|
|
|
|
SWAPPER_CTRL_RXD_R_FE |
|
|
|
|
SWAPPER_CTRL_RXD_R_SE |
|
|
|
|
SWAPPER_CTRL_RXD_W_FE |
|
|
|
|
SWAPPER_CTRL_RXD_W_SE |
|
|
|
|
SWAPPER_CTRL_RXF_W_FE |
|
|
|
|
SWAPPER_CTRL_XMSI_FE |
|
|
|
|
SWAPPER_CTRL_XMSI_SE |
|
|
|
|
SWAPPER_CTRL_STATS_FE | SWAPPER_CTRL_STATS_SE);
|
|
|
|
writeq(val64, &bar0->swapper_ctrl);
|
|
|
|
#endif
|
|
|
|
val64 = readq(&bar0->swapper_ctrl);
|
|
|
|
|
2005-08-03 13:24:33 -06:00
|
|
|
/*
|
|
|
|
* Verifying if endian settings are accurate by reading a
|
2005-04-16 16:20:36 -06:00
|
|
|
* feedback register.
|
|
|
|
*/
|
|
|
|
val64 = readq(&bar0->pif_rd_swapper_fb);
|
|
|
|
if (val64 != 0x0123456789ABCDEFULL) {
|
|
|
|
/* Endian settings are incorrect, calls for another dekko. */
|
|
|
|
DBG_PRINT(ERR_DBG, "%s: Endian settings are wrong, ",
|
|
|
|
dev->name);
|
|
|
|
DBG_PRINT(ERR_DBG, "feedback read %llx\n",
|
|
|
|
(unsigned long long) val64);
|
|
|
|
return FAILURE;
|
|
|
|
}
|
|
|
|
|
|
|
|
return SUCCESS;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* ********************************************************* *
|
|
|
|
* Functions defined below concern the OS part of the driver *
|
|
|
|
* ********************************************************* */
|
|
|
|
|
2005-08-03 13:24:33 -06:00
|
|
|
/**
|
2005-04-16 16:20:36 -06:00
|
|
|
* s2io_open - open entry point of the driver
|
|
|
|
* @dev : pointer to the device structure.
|
|
|
|
* Description:
|
|
|
|
* This function is the open entry point of the driver. It mainly calls a
|
|
|
|
* function to allocate Rx buffers and inserts them into the buffer
|
2005-08-03 13:24:33 -06:00
|
|
|
* descriptors and then enables the Rx part of the NIC.
|
2005-04-16 16:20:36 -06:00
|
|
|
* Return value:
|
|
|
|
* 0 on success and an appropriate (-)ve integer as defined in errno.h
|
|
|
|
* file on failure.
|
|
|
|
*/
|
|
|
|
|
2005-08-03 13:24:33 -06:00
|
|
|
int s2io_open(struct net_device *dev)
|
2005-04-16 16:20:36 -06:00
|
|
|
{
|
|
|
|
nic_t *sp = dev->priv;
|
|
|
|
int err = 0;
|
|
|
|
|
2005-08-03 13:24:33 -06:00
|
|
|
/*
|
|
|
|
* Make sure you have link off by default every time
|
2005-04-16 16:20:36 -06:00
|
|
|
* Nic is initialized
|
|
|
|
*/
|
|
|
|
netif_carrier_off(dev);
|
2005-08-03 13:29:20 -06:00
|
|
|
sp->last_link_state = 0; /* Unkown link state */
|
2005-04-16 16:20:36 -06:00
|
|
|
|
|
|
|
/* Initialize H/W and enable interrupts */
|
|
|
|
if (s2io_card_up(sp)) {
|
|
|
|
DBG_PRINT(ERR_DBG, "%s: H/W initialization failed\n",
|
|
|
|
dev->name);
|
2005-08-03 13:24:33 -06:00
|
|
|
err = -ENODEV;
|
|
|
|
goto hw_init_failed;
|
2005-04-16 16:20:36 -06:00
|
|
|
}
|
|
|
|
|
|
|
|
/* After proper initialization of H/W, register ISR */
|
2005-08-03 13:24:33 -06:00
|
|
|
err = request_irq((int) sp->pdev->irq, s2io_isr, SA_SHIRQ,
|
2005-04-16 16:20:36 -06:00
|
|
|
sp->name, dev);
|
|
|
|
if (err) {
|
|
|
|
DBG_PRINT(ERR_DBG, "%s: ISR registration failed\n",
|
|
|
|
dev->name);
|
2005-08-03 13:24:33 -06:00
|
|
|
goto isr_registration_failed;
|
2005-04-16 16:20:36 -06:00
|
|
|
}
|
|
|
|
|
|
|
|
if (s2io_set_mac_addr(dev, dev->dev_addr) == FAILURE) {
|
|
|
|
DBG_PRINT(ERR_DBG, "Set Mac Address Failed\n");
|
2005-08-03 13:24:33 -06:00
|
|
|
err = -ENODEV;
|
|
|
|
goto setting_mac_address_failed;
|
2005-04-16 16:20:36 -06:00
|
|
|
}
|
|
|
|
|
|
|
|
netif_start_queue(dev);
|
|
|
|
return 0;
|
2005-08-03 13:24:33 -06:00
|
|
|
|
|
|
|
setting_mac_address_failed:
|
|
|
|
free_irq(sp->pdev->irq, dev);
|
|
|
|
isr_registration_failed:
|
2005-08-03 13:34:11 -06:00
|
|
|
del_timer_sync(&sp->alarm_timer);
|
2005-08-03 13:24:33 -06:00
|
|
|
s2io_reset(sp);
|
|
|
|
hw_init_failed:
|
|
|
|
return err;
|
2005-04-16 16:20:36 -06:00
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* s2io_close -close entry point of the driver
|
|
|
|
* @dev : device pointer.
|
|
|
|
* Description:
|
|
|
|
* This is the stop entry point of the driver. It needs to undo exactly
|
|
|
|
* whatever was done by the open entry point,thus it's usually referred to
|
|
|
|
* as the close function.Among other things this function mainly stops the
|
|
|
|
* Rx side of the NIC and frees all the Rx buffers in the Rx rings.
|
|
|
|
* Return value:
|
|
|
|
* 0 on success and an appropriate (-)ve integer as defined in errno.h
|
|
|
|
* file on failure.
|
|
|
|
*/
|
|
|
|
|
2005-08-03 13:24:33 -06:00
|
|
|
int s2io_close(struct net_device *dev)
|
2005-04-16 16:20:36 -06:00
|
|
|
{
|
|
|
|
nic_t *sp = dev->priv;
|
|
|
|
flush_scheduled_work();
|
|
|
|
netif_stop_queue(dev);
|
|
|
|
/* Reset card, kill tasklet and free Tx and Rx buffers. */
|
|
|
|
s2io_card_down(sp);
|
|
|
|
|
2005-08-03 13:24:33 -06:00
|
|
|
free_irq(sp->pdev->irq, dev);
|
2005-04-16 16:20:36 -06:00
|
|
|
sp->device_close_flag = TRUE; /* Device is shut down. */
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* s2io_xmit - Tx entry point of te driver
|
|
|
|
* @skb : the socket buffer containing the Tx data.
|
|
|
|
* @dev : device pointer.
|
|
|
|
* Description :
|
|
|
|
* This function is the Tx entry point of the driver. S2IO NIC supports
|
|
|
|
* certain protocol assist features on Tx side, namely CSO, S/G, LSO.
|
|
|
|
* NOTE: when device cant queue the pkt,just the trans_start variable will
|
|
|
|
* not be upadted.
|
|
|
|
* Return value:
|
|
|
|
* 0 on success & 1 on failure.
|
|
|
|
*/
|
|
|
|
|
2005-08-03 13:24:33 -06:00
|
|
|
int s2io_xmit(struct sk_buff *skb, struct net_device *dev)
|
2005-04-16 16:20:36 -06:00
|
|
|
{
|
|
|
|
nic_t *sp = dev->priv;
|
|
|
|
u16 frg_cnt, frg_len, i, queue, queue_len, put_off, get_off;
|
|
|
|
register u64 val64;
|
|
|
|
TxD_t *txdp;
|
|
|
|
TxFIFO_element_t __iomem *tx_fifo;
|
|
|
|
unsigned long flags;
|
|
|
|
#ifdef NETIF_F_TSO
|
|
|
|
int mss;
|
|
|
|
#endif
|
2005-08-03 13:35:55 -06:00
|
|
|
u16 vlan_tag = 0;
|
|
|
|
int vlan_priority = 0;
|
2005-04-16 16:20:36 -06:00
|
|
|
mac_info_t *mac_control;
|
|
|
|
struct config_param *config;
|
|
|
|
|
|
|
|
mac_control = &sp->mac_control;
|
|
|
|
config = &sp->config;
|
|
|
|
|
2005-08-03 13:24:33 -06:00
|
|
|
DBG_PRINT(TX_DBG, "%s: In Neterion Tx routine\n", dev->name);
|
2005-04-16 16:20:36 -06:00
|
|
|
spin_lock_irqsave(&sp->tx_lock, flags);
|
|
|
|
if (atomic_read(&sp->card_state) == CARD_DOWN) {
|
2005-08-03 13:24:33 -06:00
|
|
|
DBG_PRINT(TX_DBG, "%s: Card going down for reset\n",
|
2005-04-16 16:20:36 -06:00
|
|
|
dev->name);
|
|
|
|
spin_unlock_irqrestore(&sp->tx_lock, flags);
|
2005-08-03 13:24:33 -06:00
|
|
|
dev_kfree_skb(skb);
|
|
|
|
return 0;
|
2005-04-16 16:20:36 -06:00
|
|
|
}
|
|
|
|
|
|
|
|
queue = 0;
|
|
|
|
|
2005-08-03 13:35:55 -06:00
|
|
|
/* Get Fifo number to Transmit based on vlan priority */
|
|
|
|
if (sp->vlgrp && vlan_tx_tag_present(skb)) {
|
|
|
|
vlan_tag = vlan_tx_tag_get(skb);
|
|
|
|
vlan_priority = vlan_tag >> 13;
|
|
|
|
queue = config->fifo_mapping[vlan_priority];
|
|
|
|
}
|
|
|
|
|
2005-08-03 13:24:33 -06:00
|
|
|
put_off = (u16) mac_control->fifos[queue].tx_curr_put_info.offset;
|
|
|
|
get_off = (u16) mac_control->fifos[queue].tx_curr_get_info.offset;
|
|
|
|
txdp = (TxD_t *) mac_control->fifos[queue].list_info[put_off].
|
|
|
|
list_virt_addr;
|
|
|
|
|
|
|
|
queue_len = mac_control->fifos[queue].tx_curr_put_info.fifo_len + 1;
|
2005-04-16 16:20:36 -06:00
|
|
|
/* Avoid "put" pointer going beyond "get" pointer */
|
|
|
|
if (txdp->Host_Control || (((put_off + 1) % queue_len) == get_off)) {
|
|
|
|
DBG_PRINT(ERR_DBG, "Error in xmit, No free TXDs.\n");
|
|
|
|
netif_stop_queue(dev);
|
|
|
|
dev_kfree_skb(skb);
|
|
|
|
spin_unlock_irqrestore(&sp->tx_lock, flags);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
#ifdef NETIF_F_TSO
|
|
|
|
mss = skb_shinfo(skb)->tso_size;
|
|
|
|
if (mss) {
|
|
|
|
txdp->Control_1 |= TXD_TCP_LSO_EN;
|
|
|
|
txdp->Control_1 |= TXD_TCP_LSO_MSS(mss);
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
|
|
|
|
frg_cnt = skb_shinfo(skb)->nr_frags;
|
|
|
|
frg_len = skb->len - skb->data_len;
|
|
|
|
|
|
|
|
txdp->Buffer_Pointer = pci_map_single
|
|
|
|
(sp->pdev, skb->data, frg_len, PCI_DMA_TODEVICE);
|
2005-08-03 13:24:33 -06:00
|
|
|
txdp->Host_Control = (unsigned long) skb;
|
2005-04-16 16:20:36 -06:00
|
|
|
if (skb->ip_summed == CHECKSUM_HW) {
|
|
|
|
txdp->Control_2 |=
|
|
|
|
(TXD_TX_CKO_IPV4_EN | TXD_TX_CKO_TCP_EN |
|
|
|
|
TXD_TX_CKO_UDP_EN);
|
|
|
|
}
|
|
|
|
|
|
|
|
txdp->Control_2 |= config->tx_intr_type;
|
2005-08-03 13:33:12 -06:00
|
|
|
|
2005-08-03 13:35:55 -06:00
|
|
|
if (sp->vlgrp && vlan_tx_tag_present(skb)) {
|
|
|
|
txdp->Control_2 |= TXD_VLAN_ENABLE;
|
|
|
|
txdp->Control_2 |= TXD_VLAN_TAG(vlan_tag);
|
|
|
|
}
|
|
|
|
|
2005-04-16 16:20:36 -06:00
|
|
|
txdp->Control_1 |= (TXD_BUFFER0_SIZE(frg_len) |
|
|
|
|
TXD_GATHER_CODE_FIRST);
|
|
|
|
txdp->Control_1 |= TXD_LIST_OWN_XENA;
|
|
|
|
|
|
|
|
/* For fragmented SKB. */
|
|
|
|
for (i = 0; i < frg_cnt; i++) {
|
|
|
|
skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
|
|
|
|
txdp++;
|
|
|
|
txdp->Buffer_Pointer = (u64) pci_map_page
|
|
|
|
(sp->pdev, frag->page, frag->page_offset,
|
|
|
|
frag->size, PCI_DMA_TODEVICE);
|
|
|
|
txdp->Control_1 |= TXD_BUFFER0_SIZE(frag->size);
|
|
|
|
}
|
|
|
|
txdp->Control_1 |= TXD_GATHER_CODE_LAST;
|
|
|
|
|
|
|
|
tx_fifo = mac_control->tx_FIFO_start[queue];
|
2005-08-03 13:24:33 -06:00
|
|
|
val64 = mac_control->fifos[queue].list_info[put_off].list_phy_addr;
|
2005-04-16 16:20:36 -06:00
|
|
|
writeq(val64, &tx_fifo->TxDL_Pointer);
|
|
|
|
|
2005-08-03 13:32:00 -06:00
|
|
|
wmb();
|
|
|
|
|
2005-04-16 16:20:36 -06:00
|
|
|
val64 = (TX_FIFO_LAST_TXD_NUM(frg_cnt) | TX_FIFO_FIRST_LIST |
|
|
|
|
TX_FIFO_LAST_LIST);
|
2005-08-03 13:24:33 -06:00
|
|
|
|
2005-04-16 16:20:36 -06:00
|
|
|
#ifdef NETIF_F_TSO
|
|
|
|
if (mss)
|
|
|
|
val64 |= TX_FIFO_SPECIAL_FUNC;
|
|
|
|
#endif
|
|
|
|
writeq(val64, &tx_fifo->List_Control);
|
|
|
|
|
|
|
|
put_off++;
|
2005-08-03 13:24:33 -06:00
|
|
|
put_off %= mac_control->fifos[queue].tx_curr_put_info.fifo_len + 1;
|
|
|
|
mac_control->fifos[queue].tx_curr_put_info.offset = put_off;
|
2005-04-16 16:20:36 -06:00
|
|
|
|
|
|
|
/* Avoid "put" pointer going beyond "get" pointer */
|
|
|
|
if (((put_off + 1) % queue_len) == get_off) {
|
|
|
|
DBG_PRINT(TX_DBG,
|
|
|
|
"No free TxDs for xmit, Put: 0x%x Get:0x%x\n",
|
|
|
|
put_off, get_off);
|
|
|
|
netif_stop_queue(dev);
|
|
|
|
}
|
|
|
|
|
|
|
|
dev->trans_start = jiffies;
|
|
|
|
spin_unlock_irqrestore(&sp->tx_lock, flags);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2005-08-03 13:34:11 -06:00
|
|
|
static void
|
|
|
|
s2io_alarm_handle(unsigned long data)
|
|
|
|
{
|
|
|
|
nic_t *sp = (nic_t *)data;
|
|
|
|
|
|
|
|
alarm_intr_handler(sp);
|
|
|
|
mod_timer(&sp->alarm_timer, jiffies + HZ / 2);
|
|
|
|
}
|
|
|
|
|
2005-04-16 16:20:36 -06:00
|
|
|
/**
|
|
|
|
* s2io_isr - ISR handler of the device .
|
|
|
|
* @irq: the irq of the device.
|
|
|
|
* @dev_id: a void pointer to the dev structure of the NIC.
|
|
|
|
* @pt_regs: pointer to the registers pushed on the stack.
|
2005-08-03 13:24:33 -06:00
|
|
|
* Description: This function is the ISR handler of the device. It
|
|
|
|
* identifies the reason for the interrupt and calls the relevant
|
|
|
|
* service routines. As a contongency measure, this ISR allocates the
|
2005-04-16 16:20:36 -06:00
|
|
|
* recv buffers, if their numbers are below the panic value which is
|
|
|
|
* presently set to 25% of the original number of rcv buffers allocated.
|
|
|
|
* Return value:
|
2005-08-03 13:24:33 -06:00
|
|
|
* IRQ_HANDLED: will be returned if IRQ was handled by this routine
|
2005-04-16 16:20:36 -06:00
|
|
|
* IRQ_NONE: will be returned if interrupt is not from our device
|
|
|
|
*/
|
|
|
|
static irqreturn_t s2io_isr(int irq, void *dev_id, struct pt_regs *regs)
|
|
|
|
{
|
|
|
|
struct net_device *dev = (struct net_device *) dev_id;
|
|
|
|
nic_t *sp = dev->priv;
|
|
|
|
XENA_dev_config_t __iomem *bar0 = sp->bar0;
|
2005-08-03 13:24:33 -06:00
|
|
|
int i;
|
2005-08-03 13:32:00 -06:00
|
|
|
u64 reason = 0, val64;
|
2005-04-16 16:20:36 -06:00
|
|
|
mac_info_t *mac_control;
|
|
|
|
struct config_param *config;
|
|
|
|
|
2005-08-03 13:29:20 -06:00
|
|
|
atomic_inc(&sp->isr_cnt);
|
2005-04-16 16:20:36 -06:00
|
|
|
mac_control = &sp->mac_control;
|
|
|
|
config = &sp->config;
|
|
|
|
|
2005-08-03 13:24:33 -06:00
|
|
|
/*
|
2005-04-16 16:20:36 -06:00
|
|
|
* Identify the cause for interrupt and call the appropriate
|
|
|
|
* interrupt handler. Causes for the interrupt could be;
|
|
|
|
* 1. Rx of packet.
|
|
|
|
* 2. Tx complete.
|
|
|
|
* 3. Link down.
|
2005-08-03 13:24:33 -06:00
|
|
|
* 4. Error in any functional blocks of the NIC.
|
2005-04-16 16:20:36 -06:00
|
|
|
*/
|
|
|
|
reason = readq(&bar0->general_int_status);
|
|
|
|
|
|
|
|
if (!reason) {
|
|
|
|
/* The interrupt was not raised by Xena. */
|
2005-08-03 13:29:20 -06:00
|
|
|
atomic_dec(&sp->isr_cnt);
|
2005-04-16 16:20:36 -06:00
|
|
|
return IRQ_NONE;
|
|
|
|
}
|
|
|
|
|
|
|
|
#ifdef CONFIG_S2IO_NAPI
|
|
|
|
if (reason & GEN_INTR_RXTRAFFIC) {
|
|
|
|
if (netif_rx_schedule_prep(dev)) {
|
|
|
|
en_dis_able_nic_intrs(sp, RX_TRAFFIC_INTR,
|
|
|
|
DISABLE_INTRS);
|
|
|
|
__netif_rx_schedule(dev);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
#else
|
|
|
|
/* If Intr is because of Rx Traffic */
|
|
|
|
if (reason & GEN_INTR_RXTRAFFIC) {
|
2005-08-03 13:32:00 -06:00
|
|
|
/*
|
|
|
|
* rx_traffic_int reg is an R1 register, writing all 1's
|
|
|
|
* will ensure that the actual interrupt causing bit get's
|
|
|
|
* cleared and hence a read can be avoided.
|
|
|
|
*/
|
|
|
|
val64 = 0xFFFFFFFFFFFFFFFFULL;
|
|
|
|
writeq(val64, &bar0->rx_traffic_int);
|
2005-08-03 13:24:33 -06:00
|
|
|
for (i = 0; i < config->rx_ring_num; i++) {
|
|
|
|
rx_intr_handler(&mac_control->rings[i]);
|
|
|
|
}
|
2005-04-16 16:20:36 -06:00
|
|
|
}
|
|
|
|
#endif
|
|
|
|
|
2005-08-03 13:24:33 -06:00
|
|
|
/* If Intr is because of Tx Traffic */
|
|
|
|
if (reason & GEN_INTR_TXTRAFFIC) {
|
2005-08-03 13:32:00 -06:00
|
|
|
/*
|
|
|
|
* tx_traffic_int reg is an R1 register, writing all 1's
|
|
|
|
* will ensure that the actual interrupt causing bit get's
|
|
|
|
* cleared and hence a read can be avoided.
|
|
|
|
*/
|
|
|
|
val64 = 0xFFFFFFFFFFFFFFFFULL;
|
|
|
|
writeq(val64, &bar0->tx_traffic_int);
|
|
|
|
|
2005-08-03 13:24:33 -06:00
|
|
|
for (i = 0; i < config->tx_fifo_num; i++)
|
|
|
|
tx_intr_handler(&mac_control->fifos[i]);
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* If the Rx buffer count is below the panic threshold then
|
|
|
|
* reallocate the buffers from the interrupt handler itself,
|
2005-04-16 16:20:36 -06:00
|
|
|
* else schedule a tasklet to reallocate the buffers.
|
|
|
|
*/
|
|
|
|
#ifndef CONFIG_S2IO_NAPI
|
|
|
|
for (i = 0; i < config->rx_ring_num; i++) {
|
2005-08-03 13:24:33 -06:00
|
|
|
int ret;
|
2005-04-16 16:20:36 -06:00
|
|
|
int rxb_size = atomic_read(&sp->rx_bufs_left[i]);
|
|
|
|
int level = rx_buffer_level(sp, rxb_size, i);
|
|
|
|
|
|
|
|
if ((level == PANIC) && (!TASKLET_IN_USE)) {
|
|
|
|
DBG_PRINT(INTR_DBG, "%s: Rx BD hit ", dev->name);
|
|
|
|
DBG_PRINT(INTR_DBG, "PANIC levels\n");
|
|
|
|
if ((ret = fill_rx_buffers(sp, i)) == -ENOMEM) {
|
|
|
|
DBG_PRINT(ERR_DBG, "%s:Out of memory",
|
|
|
|
dev->name);
|
|
|
|
DBG_PRINT(ERR_DBG, " in ISR!!\n");
|
|
|
|
clear_bit(0, (&sp->tasklet_status));
|
2005-08-03 13:29:20 -06:00
|
|
|
atomic_dec(&sp->isr_cnt);
|
2005-04-16 16:20:36 -06:00
|
|
|
return IRQ_HANDLED;
|
|
|
|
}
|
|
|
|
clear_bit(0, (&sp->tasklet_status));
|
|
|
|
} else if (level == LOW) {
|
|
|
|
tasklet_schedule(&sp->task);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
|
2005-08-03 13:29:20 -06:00
|
|
|
atomic_dec(&sp->isr_cnt);
|
2005-04-16 16:20:36 -06:00
|
|
|
return IRQ_HANDLED;
|
|
|
|
}
|
|
|
|
|
2005-08-03 13:29:20 -06:00
|
|
|
/**
|
|
|
|
* s2io_updt_stats -
|
|
|
|
*/
|
|
|
|
static void s2io_updt_stats(nic_t *sp)
|
|
|
|
{
|
|
|
|
XENA_dev_config_t __iomem *bar0 = sp->bar0;
|
|
|
|
u64 val64;
|
|
|
|
int cnt = 0;
|
|
|
|
|
|
|
|
if (atomic_read(&sp->card_state) == CARD_UP) {
|
|
|
|
/* Apprx 30us on a 133 MHz bus */
|
|
|
|
val64 = SET_UPDT_CLICKS(10) |
|
|
|
|
STAT_CFG_ONE_SHOT_EN | STAT_CFG_STAT_EN;
|
|
|
|
writeq(val64, &bar0->stat_cfg);
|
|
|
|
do {
|
|
|
|
udelay(100);
|
|
|
|
val64 = readq(&bar0->stat_cfg);
|
|
|
|
if (!(val64 & BIT(0)))
|
|
|
|
break;
|
|
|
|
cnt++;
|
|
|
|
if (cnt == 5)
|
|
|
|
break; /* Updt failed */
|
|
|
|
} while(1);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2005-04-16 16:20:36 -06:00
|
|
|
/**
|
2005-08-03 13:24:33 -06:00
|
|
|
* s2io_get_stats - Updates the device statistics structure.
|
2005-04-16 16:20:36 -06:00
|
|
|
* @dev : pointer to the device structure.
|
|
|
|
* Description:
|
2005-08-03 13:24:33 -06:00
|
|
|
* This function updates the device statistics structure in the s2io_nic
|
2005-04-16 16:20:36 -06:00
|
|
|
* structure and returns a pointer to the same.
|
|
|
|
* Return value:
|
|
|
|
* pointer to the updated net_device_stats structure.
|
|
|
|
*/
|
|
|
|
|
2005-08-03 13:24:33 -06:00
|
|
|
struct net_device_stats *s2io_get_stats(struct net_device *dev)
|
2005-04-16 16:20:36 -06:00
|
|
|
{
|
|
|
|
nic_t *sp = dev->priv;
|
|
|
|
mac_info_t *mac_control;
|
|
|
|
struct config_param *config;
|
|
|
|
|
2005-08-03 13:24:33 -06:00
|
|
|
|
2005-04-16 16:20:36 -06:00
|
|
|
mac_control = &sp->mac_control;
|
|
|
|
config = &sp->config;
|
|
|
|
|
2005-08-03 13:29:20 -06:00
|
|
|
/* Configure Stats for immediate updt */
|
|
|
|
s2io_updt_stats(sp);
|
|
|
|
|
|
|
|
sp->stats.tx_packets =
|
|
|
|
le32_to_cpu(mac_control->stats_info->tmac_frms);
|
2005-08-03 13:24:33 -06:00
|
|
|
sp->stats.tx_errors =
|
|
|
|
le32_to_cpu(mac_control->stats_info->tmac_any_err_frms);
|
|
|
|
sp->stats.rx_errors =
|
|
|
|
le32_to_cpu(mac_control->stats_info->rmac_drop_frms);
|
|
|
|
sp->stats.multicast =
|
|
|
|
le32_to_cpu(mac_control->stats_info->rmac_vld_mcst_frms);
|
2005-04-16 16:20:36 -06:00
|
|
|
sp->stats.rx_length_errors =
|
2005-08-03 13:24:33 -06:00
|
|
|
le32_to_cpu(mac_control->stats_info->rmac_long_frms);
|
2005-04-16 16:20:36 -06:00
|
|
|
|
|
|
|
return (&sp->stats);
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* s2io_set_multicast - entry point for multicast address enable/disable.
|
|
|
|
* @dev : pointer to the device structure
|
|
|
|
* Description:
|
2005-08-03 13:24:33 -06:00
|
|
|
* This function is a driver entry point which gets called by the kernel
|
|
|
|
* whenever multicast addresses must be enabled/disabled. This also gets
|
2005-04-16 16:20:36 -06:00
|
|
|
* called to set/reset promiscuous mode. Depending on the deivce flag, we
|
|
|
|
* determine, if multicast address must be enabled or if promiscuous mode
|
|
|
|
* is to be disabled etc.
|
|
|
|
* Return value:
|
|
|
|
* void.
|
|
|
|
*/
|
|
|
|
|
|
|
|
static void s2io_set_multicast(struct net_device *dev)
|
|
|
|
{
|
|
|
|
int i, j, prev_cnt;
|
|
|
|
struct dev_mc_list *mclist;
|
|
|
|
nic_t *sp = dev->priv;
|
|
|
|
XENA_dev_config_t __iomem *bar0 = sp->bar0;
|
|
|
|
u64 val64 = 0, multi_mac = 0x010203040506ULL, mask =
|
|
|
|
0xfeffffffffffULL;
|
|
|
|
u64 dis_addr = 0xffffffffffffULL, mac_addr = 0;
|
|
|
|
void __iomem *add;
|
|
|
|
|
|
|
|
if ((dev->flags & IFF_ALLMULTI) && (!sp->m_cast_flg)) {
|
|
|
|
/* Enable all Multicast addresses */
|
|
|
|
writeq(RMAC_ADDR_DATA0_MEM_ADDR(multi_mac),
|
|
|
|
&bar0->rmac_addr_data0_mem);
|
|
|
|
writeq(RMAC_ADDR_DATA1_MEM_MASK(mask),
|
|
|
|
&bar0->rmac_addr_data1_mem);
|
|
|
|
val64 = RMAC_ADDR_CMD_MEM_WE |
|
|
|
|
RMAC_ADDR_CMD_MEM_STROBE_NEW_CMD |
|
|
|
|
RMAC_ADDR_CMD_MEM_OFFSET(MAC_MC_ALL_MC_ADDR_OFFSET);
|
|
|
|
writeq(val64, &bar0->rmac_addr_cmd_mem);
|
|
|
|
/* Wait till command completes */
|
|
|
|
wait_for_cmd_complete(sp);
|
|
|
|
|
|
|
|
sp->m_cast_flg = 1;
|
|
|
|
sp->all_multi_pos = MAC_MC_ALL_MC_ADDR_OFFSET;
|
|
|
|
} else if ((dev->flags & IFF_ALLMULTI) && (sp->m_cast_flg)) {
|
|
|
|
/* Disable all Multicast addresses */
|
|
|
|
writeq(RMAC_ADDR_DATA0_MEM_ADDR(dis_addr),
|
|
|
|
&bar0->rmac_addr_data0_mem);
|
2005-08-03 13:27:09 -06:00
|
|
|
writeq(RMAC_ADDR_DATA1_MEM_MASK(0x0),
|
|
|
|
&bar0->rmac_addr_data1_mem);
|
2005-04-16 16:20:36 -06:00
|
|
|
val64 = RMAC_ADDR_CMD_MEM_WE |
|
|
|
|
RMAC_ADDR_CMD_MEM_STROBE_NEW_CMD |
|
|
|
|
RMAC_ADDR_CMD_MEM_OFFSET(sp->all_multi_pos);
|
|
|
|
writeq(val64, &bar0->rmac_addr_cmd_mem);
|
|
|
|
/* Wait till command completes */
|
|
|
|
wait_for_cmd_complete(sp);
|
|
|
|
|
|
|
|
sp->m_cast_flg = 0;
|
|
|
|
sp->all_multi_pos = 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
if ((dev->flags & IFF_PROMISC) && (!sp->promisc_flg)) {
|
|
|
|
/* Put the NIC into promiscuous mode */
|
|
|
|
add = &bar0->mac_cfg;
|
|
|
|
val64 = readq(&bar0->mac_cfg);
|
|
|
|
val64 |= MAC_CFG_RMAC_PROM_ENABLE;
|
|
|
|
|
|
|
|
writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key);
|
|
|
|
writel((u32) val64, add);
|
|
|
|
writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key);
|
|
|
|
writel((u32) (val64 >> 32), (add + 4));
|
|
|
|
|
|
|
|
val64 = readq(&bar0->mac_cfg);
|
|
|
|
sp->promisc_flg = 1;
|
|
|
|
DBG_PRINT(ERR_DBG, "%s: entered promiscuous mode\n",
|
|
|
|
dev->name);
|
|
|
|
} else if (!(dev->flags & IFF_PROMISC) && (sp->promisc_flg)) {
|
|
|
|
/* Remove the NIC from promiscuous mode */
|
|
|
|
add = &bar0->mac_cfg;
|
|
|
|
val64 = readq(&bar0->mac_cfg);
|
|
|
|
val64 &= ~MAC_CFG_RMAC_PROM_ENABLE;
|
|
|
|
|
|
|
|
writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key);
|
|
|
|
writel((u32) val64, add);
|
|
|
|
writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key);
|
|
|
|
writel((u32) (val64 >> 32), (add + 4));
|
|
|
|
|
|
|
|
val64 = readq(&bar0->mac_cfg);
|
|
|
|
sp->promisc_flg = 0;
|
|
|
|
DBG_PRINT(ERR_DBG, "%s: left promiscuous mode\n",
|
|
|
|
dev->name);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Update individual M_CAST address list */
|
|
|
|
if ((!sp->m_cast_flg) && dev->mc_count) {
|
|
|
|
if (dev->mc_count >
|
|
|
|
(MAX_ADDRS_SUPPORTED - MAC_MC_ADDR_START_OFFSET - 1)) {
|
|
|
|
DBG_PRINT(ERR_DBG, "%s: No more Rx filters ",
|
|
|
|
dev->name);
|
|
|
|
DBG_PRINT(ERR_DBG, "can be added, please enable ");
|
|
|
|
DBG_PRINT(ERR_DBG, "ALL_MULTI instead\n");
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
prev_cnt = sp->mc_addr_count;
|
|
|
|
sp->mc_addr_count = dev->mc_count;
|
|
|
|
|
|
|
|
/* Clear out the previous list of Mc in the H/W. */
|
|
|
|
for (i = 0; i < prev_cnt; i++) {
|
|
|
|
writeq(RMAC_ADDR_DATA0_MEM_ADDR(dis_addr),
|
|
|
|
&bar0->rmac_addr_data0_mem);
|
|
|
|
writeq(RMAC_ADDR_DATA1_MEM_MASK(0ULL),
|
2005-08-03 13:24:33 -06:00
|
|
|
&bar0->rmac_addr_data1_mem);
|
2005-04-16 16:20:36 -06:00
|
|
|
val64 = RMAC_ADDR_CMD_MEM_WE |
|
|
|
|
RMAC_ADDR_CMD_MEM_STROBE_NEW_CMD |
|
|
|
|
RMAC_ADDR_CMD_MEM_OFFSET
|
|
|
|
(MAC_MC_ADDR_START_OFFSET + i);
|
|
|
|
writeq(val64, &bar0->rmac_addr_cmd_mem);
|
|
|
|
|
|
|
|
/* Wait for command completes */
|
|
|
|
if (wait_for_cmd_complete(sp)) {
|
|
|
|
DBG_PRINT(ERR_DBG, "%s: Adding ",
|
|
|
|
dev->name);
|
|
|
|
DBG_PRINT(ERR_DBG, "Multicasts failed\n");
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Create the new Rx filter list and update the same in H/W. */
|
|
|
|
for (i = 0, mclist = dev->mc_list; i < dev->mc_count;
|
|
|
|
i++, mclist = mclist->next) {
|
|
|
|
memcpy(sp->usr_addrs[i].addr, mclist->dmi_addr,
|
|
|
|
ETH_ALEN);
|
|
|
|
for (j = 0; j < ETH_ALEN; j++) {
|
|
|
|
mac_addr |= mclist->dmi_addr[j];
|
|
|
|
mac_addr <<= 8;
|
|
|
|
}
|
|
|
|
mac_addr >>= 8;
|
|
|
|
writeq(RMAC_ADDR_DATA0_MEM_ADDR(mac_addr),
|
|
|
|
&bar0->rmac_addr_data0_mem);
|
|
|
|
writeq(RMAC_ADDR_DATA1_MEM_MASK(0ULL),
|
2005-08-03 13:24:33 -06:00
|
|
|
&bar0->rmac_addr_data1_mem);
|
2005-04-16 16:20:36 -06:00
|
|
|
val64 = RMAC_ADDR_CMD_MEM_WE |
|
|
|
|
RMAC_ADDR_CMD_MEM_STROBE_NEW_CMD |
|
|
|
|
RMAC_ADDR_CMD_MEM_OFFSET
|
|
|
|
(i + MAC_MC_ADDR_START_OFFSET);
|
|
|
|
writeq(val64, &bar0->rmac_addr_cmd_mem);
|
|
|
|
|
|
|
|
/* Wait for command completes */
|
|
|
|
if (wait_for_cmd_complete(sp)) {
|
|
|
|
DBG_PRINT(ERR_DBG, "%s: Adding ",
|
|
|
|
dev->name);
|
|
|
|
DBG_PRINT(ERR_DBG, "Multicasts failed\n");
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
2005-08-03 13:24:33 -06:00
|
|
|
* s2io_set_mac_addr - Programs the Xframe mac address
|
2005-04-16 16:20:36 -06:00
|
|
|
* @dev : pointer to the device structure.
|
|
|
|
* @addr: a uchar pointer to the new mac address which is to be set.
|
2005-08-03 13:24:33 -06:00
|
|
|
* Description : This procedure will program the Xframe to receive
|
2005-04-16 16:20:36 -06:00
|
|
|
* frames with new Mac Address
|
2005-08-03 13:24:33 -06:00
|
|
|
* Return value: SUCCESS on success and an appropriate (-)ve integer
|
2005-04-16 16:20:36 -06:00
|
|
|
* as defined in errno.h file on failure.
|
|
|
|
*/
|
|
|
|
|
|
|
|
int s2io_set_mac_addr(struct net_device *dev, u8 * addr)
|
|
|
|
{
|
|
|
|
nic_t *sp = dev->priv;
|
|
|
|
XENA_dev_config_t __iomem *bar0 = sp->bar0;
|
|
|
|
register u64 val64, mac_addr = 0;
|
|
|
|
int i;
|
|
|
|
|
2005-08-03 13:24:33 -06:00
|
|
|
/*
|
2005-04-16 16:20:36 -06:00
|
|
|
* Set the new MAC address as the new unicast filter and reflect this
|
|
|
|
* change on the device address registered with the OS. It will be
|
2005-08-03 13:24:33 -06:00
|
|
|
* at offset 0.
|
2005-04-16 16:20:36 -06:00
|
|
|
*/
|
|
|
|
for (i = 0; i < ETH_ALEN; i++) {
|
|
|
|
mac_addr <<= 8;
|
|
|
|
mac_addr |= addr[i];
|
|
|
|
}
|
|
|
|
|
|
|
|
writeq(RMAC_ADDR_DATA0_MEM_ADDR(mac_addr),
|
|
|
|
&bar0->rmac_addr_data0_mem);
|
|
|
|
|
|
|
|
val64 =
|
|
|
|
RMAC_ADDR_CMD_MEM_WE | RMAC_ADDR_CMD_MEM_STROBE_NEW_CMD |
|
|
|
|
RMAC_ADDR_CMD_MEM_OFFSET(0);
|
|
|
|
writeq(val64, &bar0->rmac_addr_cmd_mem);
|
|
|
|
/* Wait till command completes */
|
|
|
|
if (wait_for_cmd_complete(sp)) {
|
|
|
|
DBG_PRINT(ERR_DBG, "%s: set_mac_addr failed\n", dev->name);
|
|
|
|
return FAILURE;
|
|
|
|
}
|
|
|
|
|
|
|
|
return SUCCESS;
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
2005-08-03 13:24:33 -06:00
|
|
|
* s2io_ethtool_sset - Sets different link parameters.
|
2005-04-16 16:20:36 -06:00
|
|
|
* @sp : private member of the device structure, which is a pointer to the * s2io_nic structure.
|
|
|
|
* @info: pointer to the structure with parameters given by ethtool to set
|
|
|
|
* link information.
|
|
|
|
* Description:
|
2005-08-03 13:24:33 -06:00
|
|
|
* The function sets different link parameters provided by the user onto
|
2005-04-16 16:20:36 -06:00
|
|
|
* the NIC.
|
|
|
|
* Return value:
|
|
|
|
* 0 on success.
|
|
|
|
*/
|
|
|
|
|
|
|
|
static int s2io_ethtool_sset(struct net_device *dev,
|
|
|
|
struct ethtool_cmd *info)
|
|
|
|
{
|
|
|
|
nic_t *sp = dev->priv;
|
|
|
|
if ((info->autoneg == AUTONEG_ENABLE) ||
|
|
|
|
(info->speed != SPEED_10000) || (info->duplex != DUPLEX_FULL))
|
|
|
|
return -EINVAL;
|
|
|
|
else {
|
|
|
|
s2io_close(sp->dev);
|
|
|
|
s2io_open(sp->dev);
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
2005-08-03 13:24:33 -06:00
|
|
|
* s2io_ethtol_gset - Return link specific information.
|
2005-04-16 16:20:36 -06:00
|
|
|
* @sp : private member of the device structure, pointer to the
|
|
|
|
* s2io_nic structure.
|
|
|
|
* @info : pointer to the structure with parameters given by ethtool
|
|
|
|
* to return link information.
|
|
|
|
* Description:
|
|
|
|
* Returns link specific information like speed, duplex etc.. to ethtool.
|
|
|
|
* Return value :
|
|
|
|
* return 0 on success.
|
|
|
|
*/
|
|
|
|
|
|
|
|
static int s2io_ethtool_gset(struct net_device *dev, struct ethtool_cmd *info)
|
|
|
|
{
|
|
|
|
nic_t *sp = dev->priv;
|
|
|
|
info->supported = (SUPPORTED_10000baseT_Full | SUPPORTED_FIBRE);
|
|
|
|
info->advertising = (SUPPORTED_10000baseT_Full | SUPPORTED_FIBRE);
|
|
|
|
info->port = PORT_FIBRE;
|
|
|
|
/* info->transceiver?? TODO */
|
|
|
|
|
|
|
|
if (netif_carrier_ok(sp->dev)) {
|
|
|
|
info->speed = 10000;
|
|
|
|
info->duplex = DUPLEX_FULL;
|
|
|
|
} else {
|
|
|
|
info->speed = -1;
|
|
|
|
info->duplex = -1;
|
|
|
|
}
|
|
|
|
|
|
|
|
info->autoneg = AUTONEG_DISABLE;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
2005-08-03 13:24:33 -06:00
|
|
|
* s2io_ethtool_gdrvinfo - Returns driver specific information.
|
|
|
|
* @sp : private member of the device structure, which is a pointer to the
|
2005-04-16 16:20:36 -06:00
|
|
|
* s2io_nic structure.
|
|
|
|
* @info : pointer to the structure with parameters given by ethtool to
|
|
|
|
* return driver information.
|
|
|
|
* Description:
|
|
|
|
* Returns driver specefic information like name, version etc.. to ethtool.
|
|
|
|
* Return value:
|
|
|
|
* void
|
|
|
|
*/
|
|
|
|
|
|
|
|
static void s2io_ethtool_gdrvinfo(struct net_device *dev,
|
|
|
|
struct ethtool_drvinfo *info)
|
|
|
|
{
|
|
|
|
nic_t *sp = dev->priv;
|
|
|
|
|
|
|
|
strncpy(info->driver, s2io_driver_name, sizeof(s2io_driver_name));
|
|
|
|
strncpy(info->version, s2io_driver_version,
|
|
|
|
sizeof(s2io_driver_version));
|
|
|
|
strncpy(info->fw_version, "", 32);
|
|
|
|
strncpy(info->bus_info, pci_name(sp->pdev), 32);
|
|
|
|
info->regdump_len = XENA_REG_SPACE;
|
|
|
|
info->eedump_len = XENA_EEPROM_SPACE;
|
|
|
|
info->testinfo_len = S2IO_TEST_LEN;
|
|
|
|
info->n_stats = S2IO_STAT_LEN;
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* s2io_ethtool_gregs - dumps the entire space of Xfame into the buffer.
|
2005-08-03 13:24:33 -06:00
|
|
|
* @sp: private member of the device structure, which is a pointer to the
|
2005-04-16 16:20:36 -06:00
|
|
|
* s2io_nic structure.
|
2005-08-03 13:24:33 -06:00
|
|
|
* @regs : pointer to the structure with parameters given by ethtool for
|
2005-04-16 16:20:36 -06:00
|
|
|
* dumping the registers.
|
|
|
|
* @reg_space: The input argumnet into which all the registers are dumped.
|
|
|
|
* Description:
|
|
|
|
* Dumps the entire register space of xFrame NIC into the user given
|
|
|
|
* buffer area.
|
|
|
|
* Return value :
|
|
|
|
* void .
|
|
|
|
*/
|
|
|
|
|
|
|
|
static void s2io_ethtool_gregs(struct net_device *dev,
|
|
|
|
struct ethtool_regs *regs, void *space)
|
|
|
|
{
|
|
|
|
int i;
|
|
|
|
u64 reg;
|
|
|
|
u8 *reg_space = (u8 *) space;
|
|
|
|
nic_t *sp = dev->priv;
|
|
|
|
|
|
|
|
regs->len = XENA_REG_SPACE;
|
|
|
|
regs->version = sp->pdev->subsystem_device;
|
|
|
|
|
|
|
|
for (i = 0; i < regs->len; i += 8) {
|
|
|
|
reg = readq(sp->bar0 + i);
|
|
|
|
memcpy((reg_space + i), ®, 8);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* s2io_phy_id - timer function that alternates adapter LED.
|
2005-08-03 13:24:33 -06:00
|
|
|
* @data : address of the private member of the device structure, which
|
2005-04-16 16:20:36 -06:00
|
|
|
* is a pointer to the s2io_nic structure, provided as an u32.
|
2005-08-03 13:24:33 -06:00
|
|
|
* Description: This is actually the timer function that alternates the
|
|
|
|
* adapter LED bit of the adapter control bit to set/reset every time on
|
|
|
|
* invocation. The timer is set for 1/2 a second, hence tha NIC blinks
|
2005-04-16 16:20:36 -06:00
|
|
|
* once every second.
|
|
|
|
*/
|
|
|
|
static void s2io_phy_id(unsigned long data)
|
|
|
|
{
|
|
|
|
nic_t *sp = (nic_t *) data;
|
|
|
|
XENA_dev_config_t __iomem *bar0 = sp->bar0;
|
|
|
|
u64 val64 = 0;
|
|
|
|
u16 subid;
|
|
|
|
|
|
|
|
subid = sp->pdev->subsystem_device;
|
|
|
|
if ((subid & 0xFF) >= 0x07) {
|
|
|
|
val64 = readq(&bar0->gpio_control);
|
|
|
|
val64 ^= GPIO_CTRL_GPIO_0;
|
|
|
|
writeq(val64, &bar0->gpio_control);
|
|
|
|
} else {
|
|
|
|
val64 = readq(&bar0->adapter_control);
|
|
|
|
val64 ^= ADAPTER_LED_ON;
|
|
|
|
writeq(val64, &bar0->adapter_control);
|
|
|
|
}
|
|
|
|
|
|
|
|
mod_timer(&sp->id_timer, jiffies + HZ / 2);
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* s2io_ethtool_idnic - To physically identify the nic on the system.
|
|
|
|
* @sp : private member of the device structure, which is a pointer to the
|
|
|
|
* s2io_nic structure.
|
2005-08-03 13:24:33 -06:00
|
|
|
* @id : pointer to the structure with identification parameters given by
|
2005-04-16 16:20:36 -06:00
|
|
|
* ethtool.
|
|
|
|
* Description: Used to physically identify the NIC on the system.
|
2005-08-03 13:24:33 -06:00
|
|
|
* The Link LED will blink for a time specified by the user for
|
2005-04-16 16:20:36 -06:00
|
|
|
* identification.
|
2005-08-03 13:24:33 -06:00
|
|
|
* NOTE: The Link has to be Up to be able to blink the LED. Hence
|
2005-04-16 16:20:36 -06:00
|
|
|
* identification is possible only if it's link is up.
|
|
|
|
* Return value:
|
|
|
|
* int , returns 0 on success
|
|
|
|
*/
|
|
|
|
|
|
|
|
static int s2io_ethtool_idnic(struct net_device *dev, u32 data)
|
|
|
|
{
|
|
|
|
u64 val64 = 0, last_gpio_ctrl_val;
|
|
|
|
nic_t *sp = dev->priv;
|
|
|
|
XENA_dev_config_t __iomem *bar0 = sp->bar0;
|
|
|
|
u16 subid;
|
|
|
|
|
|
|
|
subid = sp->pdev->subsystem_device;
|
|
|
|
last_gpio_ctrl_val = readq(&bar0->gpio_control);
|
|
|
|
if ((subid & 0xFF) < 0x07) {
|
|
|
|
val64 = readq(&bar0->adapter_control);
|
|
|
|
if (!(val64 & ADAPTER_CNTL_EN)) {
|
|
|
|
printk(KERN_ERR
|
|
|
|
"Adapter Link down, cannot blink LED\n");
|
|
|
|
return -EFAULT;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
if (sp->id_timer.function == NULL) {
|
|
|
|
init_timer(&sp->id_timer);
|
|
|
|
sp->id_timer.function = s2io_phy_id;
|
|
|
|
sp->id_timer.data = (unsigned long) sp;
|
|
|
|
}
|
|
|
|
mod_timer(&sp->id_timer, jiffies);
|
|
|
|
if (data)
|
2005-08-03 13:24:33 -06:00
|
|
|
msleep_interruptible(data * HZ);
|
2005-04-16 16:20:36 -06:00
|
|
|
else
|
2005-08-03 13:24:33 -06:00
|
|
|
msleep_interruptible(MAX_FLICKER_TIME);
|
2005-04-16 16:20:36 -06:00
|
|
|
del_timer_sync(&sp->id_timer);
|
|
|
|
|
|
|
|
if (CARDS_WITH_FAULTY_LINK_INDICATORS(subid)) {
|
|
|
|
writeq(last_gpio_ctrl_val, &bar0->gpio_control);
|
|
|
|
last_gpio_ctrl_val = readq(&bar0->gpio_control);
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* s2io_ethtool_getpause_data -Pause frame frame generation and reception.
|
2005-08-03 13:24:33 -06:00
|
|
|
* @sp : private member of the device structure, which is a pointer to the
|
|
|
|
* s2io_nic structure.
|
2005-04-16 16:20:36 -06:00
|
|
|
* @ep : pointer to the structure with pause parameters given by ethtool.
|
|
|
|
* Description:
|
|
|
|
* Returns the Pause frame generation and reception capability of the NIC.
|
|
|
|
* Return value:
|
|
|
|
* void
|
|
|
|
*/
|
|
|
|
static void s2io_ethtool_getpause_data(struct net_device *dev,
|
|
|
|
struct ethtool_pauseparam *ep)
|
|
|
|
{
|
|
|
|
u64 val64;
|
|
|
|
nic_t *sp = dev->priv;
|
|
|
|
XENA_dev_config_t __iomem *bar0 = sp->bar0;
|
|
|
|
|
|
|
|
val64 = readq(&bar0->rmac_pause_cfg);
|
|
|
|
if (val64 & RMAC_PAUSE_GEN_ENABLE)
|
|
|
|
ep->tx_pause = TRUE;
|
|
|
|
if (val64 & RMAC_PAUSE_RX_ENABLE)
|
|
|
|
ep->rx_pause = TRUE;
|
|
|
|
ep->autoneg = FALSE;
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* s2io_ethtool_setpause_data - set/reset pause frame generation.
|
2005-08-03 13:24:33 -06:00
|
|
|
* @sp : private member of the device structure, which is a pointer to the
|
2005-04-16 16:20:36 -06:00
|
|
|
* s2io_nic structure.
|
|
|
|
* @ep : pointer to the structure with pause parameters given by ethtool.
|
|
|
|
* Description:
|
|
|
|
* It can be used to set or reset Pause frame generation or reception
|
|
|
|
* support of the NIC.
|
|
|
|
* Return value:
|
|
|
|
* int, returns 0 on Success
|
|
|
|
*/
|
|
|
|
|
|
|
|
static int s2io_ethtool_setpause_data(struct net_device *dev,
|
2005-08-03 13:24:33 -06:00
|
|
|
struct ethtool_pauseparam *ep)
|
2005-04-16 16:20:36 -06:00
|
|
|
{
|
|
|
|
u64 val64;
|
|
|
|
nic_t *sp = dev->priv;
|
|
|
|
XENA_dev_config_t __iomem *bar0 = sp->bar0;
|
|
|
|
|
|
|
|
val64 = readq(&bar0->rmac_pause_cfg);
|
|
|
|
if (ep->tx_pause)
|
|
|
|
val64 |= RMAC_PAUSE_GEN_ENABLE;
|
|
|
|
else
|
|
|
|
val64 &= ~RMAC_PAUSE_GEN_ENABLE;
|
|
|
|
if (ep->rx_pause)
|
|
|
|
val64 |= RMAC_PAUSE_RX_ENABLE;
|
|
|
|
else
|
|
|
|
val64 &= ~RMAC_PAUSE_RX_ENABLE;
|
|
|
|
writeq(val64, &bar0->rmac_pause_cfg);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* read_eeprom - reads 4 bytes of data from user given offset.
|
2005-08-03 13:24:33 -06:00
|
|
|
* @sp : private member of the device structure, which is a pointer to the
|
2005-04-16 16:20:36 -06:00
|
|
|
* s2io_nic structure.
|
|
|
|
* @off : offset at which the data must be written
|
|
|
|
* @data : Its an output parameter where the data read at the given
|
2005-08-03 13:24:33 -06:00
|
|
|
* offset is stored.
|
2005-04-16 16:20:36 -06:00
|
|
|
* Description:
|
2005-08-03 13:24:33 -06:00
|
|
|
* Will read 4 bytes of data from the user given offset and return the
|
2005-04-16 16:20:36 -06:00
|
|
|
* read data.
|
|
|
|
* NOTE: Will allow to read only part of the EEPROM visible through the
|
|
|
|
* I2C bus.
|
|
|
|
* Return value:
|
|
|
|
* -1 on failure and 0 on success.
|
|
|
|
*/
|
|
|
|
|
|
|
|
#define S2IO_DEV_ID 5
|
|
|
|
static int read_eeprom(nic_t * sp, int off, u32 * data)
|
|
|
|
{
|
|
|
|
int ret = -1;
|
|
|
|
u32 exit_cnt = 0;
|
|
|
|
u64 val64;
|
|
|
|
XENA_dev_config_t __iomem *bar0 = sp->bar0;
|
|
|
|
|
|
|
|
val64 = I2C_CONTROL_DEV_ID(S2IO_DEV_ID) | I2C_CONTROL_ADDR(off) |
|
|
|
|
I2C_CONTROL_BYTE_CNT(0x3) | I2C_CONTROL_READ |
|
|
|
|
I2C_CONTROL_CNTL_START;
|
|
|
|
SPECIAL_REG_WRITE(val64, &bar0->i2c_control, LF);
|
|
|
|
|
|
|
|
while (exit_cnt < 5) {
|
|
|
|
val64 = readq(&bar0->i2c_control);
|
|
|
|
if (I2C_CONTROL_CNTL_END(val64)) {
|
|
|
|
*data = I2C_CONTROL_GET_DATA(val64);
|
|
|
|
ret = 0;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
msleep(50);
|
|
|
|
exit_cnt++;
|
|
|
|
}
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* write_eeprom - actually writes the relevant part of the data value.
|
|
|
|
* @sp : private member of the device structure, which is a pointer to the
|
|
|
|
* s2io_nic structure.
|
|
|
|
* @off : offset at which the data must be written
|
|
|
|
* @data : The data that is to be written
|
2005-08-03 13:24:33 -06:00
|
|
|
* @cnt : Number of bytes of the data that are actually to be written into
|
2005-04-16 16:20:36 -06:00
|
|
|
* the Eeprom. (max of 3)
|
|
|
|
* Description:
|
|
|
|
* Actually writes the relevant part of the data value into the Eeprom
|
|
|
|
* through the I2C bus.
|
|
|
|
* Return value:
|
|
|
|
* 0 on success, -1 on failure.
|
|
|
|
*/
|
|
|
|
|
|
|
|
static int write_eeprom(nic_t * sp, int off, u32 data, int cnt)
|
|
|
|
{
|
|
|
|
int exit_cnt = 0, ret = -1;
|
|
|
|
u64 val64;
|
|
|
|
XENA_dev_config_t __iomem *bar0 = sp->bar0;
|
|
|
|
|
|
|
|
val64 = I2C_CONTROL_DEV_ID(S2IO_DEV_ID) | I2C_CONTROL_ADDR(off) |
|
|
|
|
I2C_CONTROL_BYTE_CNT(cnt) | I2C_CONTROL_SET_DATA(data) |
|
|
|
|
I2C_CONTROL_CNTL_START;
|
|
|
|
SPECIAL_REG_WRITE(val64, &bar0->i2c_control, LF);
|
|
|
|
|
|
|
|
while (exit_cnt < 5) {
|
|
|
|
val64 = readq(&bar0->i2c_control);
|
|
|
|
if (I2C_CONTROL_CNTL_END(val64)) {
|
|
|
|
if (!(val64 & I2C_CONTROL_NACK))
|
|
|
|
ret = 0;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
msleep(50);
|
|
|
|
exit_cnt++;
|
|
|
|
}
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* s2io_ethtool_geeprom - reads the value stored in the Eeprom.
|
|
|
|
* @sp : private member of the device structure, which is a pointer to the * s2io_nic structure.
|
2005-08-03 13:24:33 -06:00
|
|
|
* @eeprom : pointer to the user level structure provided by ethtool,
|
2005-04-16 16:20:36 -06:00
|
|
|
* containing all relevant information.
|
|
|
|
* @data_buf : user defined value to be written into Eeprom.
|
|
|
|
* Description: Reads the values stored in the Eeprom at given offset
|
|
|
|
* for a given length. Stores these values int the input argument data
|
|
|
|
* buffer 'data_buf' and returns these to the caller (ethtool.)
|
|
|
|
* Return value:
|
|
|
|
* int 0 on success
|
|
|
|
*/
|
|
|
|
|
|
|
|
static int s2io_ethtool_geeprom(struct net_device *dev,
|
2005-08-03 13:24:33 -06:00
|
|
|
struct ethtool_eeprom *eeprom, u8 * data_buf)
|
2005-04-16 16:20:36 -06:00
|
|
|
{
|
|
|
|
u32 data, i, valid;
|
|
|
|
nic_t *sp = dev->priv;
|
|
|
|
|
|
|
|
eeprom->magic = sp->pdev->vendor | (sp->pdev->device << 16);
|
|
|
|
|
|
|
|
if ((eeprom->offset + eeprom->len) > (XENA_EEPROM_SPACE))
|
|
|
|
eeprom->len = XENA_EEPROM_SPACE - eeprom->offset;
|
|
|
|
|
|
|
|
for (i = 0; i < eeprom->len; i += 4) {
|
|
|
|
if (read_eeprom(sp, (eeprom->offset + i), &data)) {
|
|
|
|
DBG_PRINT(ERR_DBG, "Read of EEPROM failed\n");
|
|
|
|
return -EFAULT;
|
|
|
|
}
|
|
|
|
valid = INV(data);
|
|
|
|
memcpy((data_buf + i), &valid, 4);
|
|
|
|
}
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* s2io_ethtool_seeprom - tries to write the user provided value in Eeprom
|
|
|
|
* @sp : private member of the device structure, which is a pointer to the
|
|
|
|
* s2io_nic structure.
|
2005-08-03 13:24:33 -06:00
|
|
|
* @eeprom : pointer to the user level structure provided by ethtool,
|
2005-04-16 16:20:36 -06:00
|
|
|
* containing all relevant information.
|
|
|
|
* @data_buf ; user defined value to be written into Eeprom.
|
|
|
|
* Description:
|
|
|
|
* Tries to write the user provided value in the Eeprom, at the offset
|
|
|
|
* given by the user.
|
|
|
|
* Return value:
|
|
|
|
* 0 on success, -EFAULT on failure.
|
|
|
|
*/
|
|
|
|
|
|
|
|
static int s2io_ethtool_seeprom(struct net_device *dev,
|
|
|
|
struct ethtool_eeprom *eeprom,
|
|
|
|
u8 * data_buf)
|
|
|
|
{
|
|
|
|
int len = eeprom->len, cnt = 0;
|
|
|
|
u32 valid = 0, data;
|
|
|
|
nic_t *sp = dev->priv;
|
|
|
|
|
|
|
|
if (eeprom->magic != (sp->pdev->vendor | (sp->pdev->device << 16))) {
|
|
|
|
DBG_PRINT(ERR_DBG,
|
|
|
|
"ETHTOOL_WRITE_EEPROM Err: Magic value ");
|
|
|
|
DBG_PRINT(ERR_DBG, "is wrong, Its not 0x%x\n",
|
|
|
|
eeprom->magic);
|
|
|
|
return -EFAULT;
|
|
|
|
}
|
|
|
|
|
|
|
|
while (len) {
|
|
|
|
data = (u32) data_buf[cnt] & 0x000000FF;
|
|
|
|
if (data) {
|
|
|
|
valid = (u32) (data << 24);
|
|
|
|
} else
|
|
|
|
valid = data;
|
|
|
|
|
|
|
|
if (write_eeprom(sp, (eeprom->offset + cnt), valid, 0)) {
|
|
|
|
DBG_PRINT(ERR_DBG,
|
|
|
|
"ETHTOOL_WRITE_EEPROM Err: Cannot ");
|
|
|
|
DBG_PRINT(ERR_DBG,
|
|
|
|
"write into the specified offset\n");
|
|
|
|
return -EFAULT;
|
|
|
|
}
|
|
|
|
cnt++;
|
|
|
|
len--;
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
2005-08-03 13:24:33 -06:00
|
|
|
* s2io_register_test - reads and writes into all clock domains.
|
|
|
|
* @sp : private member of the device structure, which is a pointer to the
|
2005-04-16 16:20:36 -06:00
|
|
|
* s2io_nic structure.
|
|
|
|
* @data : variable that returns the result of each of the test conducted b
|
|
|
|
* by the driver.
|
|
|
|
* Description:
|
|
|
|
* Read and write into all clock domains. The NIC has 3 clock domains,
|
|
|
|
* see that registers in all the three regions are accessible.
|
|
|
|
* Return value:
|
|
|
|
* 0 on success.
|
|
|
|
*/
|
|
|
|
|
|
|
|
static int s2io_register_test(nic_t * sp, uint64_t * data)
|
|
|
|
{
|
|
|
|
XENA_dev_config_t __iomem *bar0 = sp->bar0;
|
|
|
|
u64 val64 = 0;
|
|
|
|
int fail = 0;
|
|
|
|
|
2005-08-03 13:24:33 -06:00
|
|
|
val64 = readq(&bar0->pif_rd_swapper_fb);
|
|
|
|
if (val64 != 0x123456789abcdefULL) {
|
2005-04-16 16:20:36 -06:00
|
|
|
fail = 1;
|
|
|
|
DBG_PRINT(INFO_DBG, "Read Test level 1 fails\n");
|
|
|
|
}
|
|
|
|
|
|
|
|
val64 = readq(&bar0->rmac_pause_cfg);
|
|
|
|
if (val64 != 0xc000ffff00000000ULL) {
|
|
|
|
fail = 1;
|
|
|
|
DBG_PRINT(INFO_DBG, "Read Test level 2 fails\n");
|
|
|
|
}
|
|
|
|
|
|
|
|
val64 = readq(&bar0->rx_queue_cfg);
|
|
|
|
if (val64 != 0x0808080808080808ULL) {
|
|
|
|
fail = 1;
|
|
|
|
DBG_PRINT(INFO_DBG, "Read Test level 3 fails\n");
|
|
|
|
}
|
|
|
|
|
|
|
|
val64 = readq(&bar0->xgxs_efifo_cfg);
|
|
|
|
if (val64 != 0x000000001923141EULL) {
|
|
|
|
fail = 1;
|
|
|
|
DBG_PRINT(INFO_DBG, "Read Test level 4 fails\n");
|
|
|
|
}
|
|
|
|
|
|
|
|
val64 = 0x5A5A5A5A5A5A5A5AULL;
|
|
|
|
writeq(val64, &bar0->xmsi_data);
|
|
|
|
val64 = readq(&bar0->xmsi_data);
|
|
|
|
if (val64 != 0x5A5A5A5A5A5A5A5AULL) {
|
|
|
|
fail = 1;
|
|
|
|
DBG_PRINT(ERR_DBG, "Write Test level 1 fails\n");
|
|
|
|
}
|
|
|
|
|
|
|
|
val64 = 0xA5A5A5A5A5A5A5A5ULL;
|
|
|
|
writeq(val64, &bar0->xmsi_data);
|
|
|
|
val64 = readq(&bar0->xmsi_data);
|
|
|
|
if (val64 != 0xA5A5A5A5A5A5A5A5ULL) {
|
|
|
|
fail = 1;
|
|
|
|
DBG_PRINT(ERR_DBG, "Write Test level 2 fails\n");
|
|
|
|
}
|
|
|
|
|
|
|
|
*data = fail;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
2005-08-03 13:24:33 -06:00
|
|
|
* s2io_eeprom_test - to verify that EEprom in the xena can be programmed.
|
2005-04-16 16:20:36 -06:00
|
|
|
* @sp : private member of the device structure, which is a pointer to the
|
|
|
|
* s2io_nic structure.
|
|
|
|
* @data:variable that returns the result of each of the test conducted by
|
|
|
|
* the driver.
|
|
|
|
* Description:
|
2005-08-03 13:24:33 -06:00
|
|
|
* Verify that EEPROM in the xena can be programmed using I2C_CONTROL
|
2005-04-16 16:20:36 -06:00
|
|
|
* register.
|
|
|
|
* Return value:
|
|
|
|
* 0 on success.
|
|
|
|
*/
|
|
|
|
|
|
|
|
static int s2io_eeprom_test(nic_t * sp, uint64_t * data)
|
|
|
|
{
|
|
|
|
int fail = 0;
|
|
|
|
u32 ret_data;
|
|
|
|
|
|
|
|
/* Test Write Error at offset 0 */
|
|
|
|
if (!write_eeprom(sp, 0, 0, 3))
|
|
|
|
fail = 1;
|
|
|
|
|
|
|
|
/* Test Write at offset 4f0 */
|
|
|
|
if (write_eeprom(sp, 0x4F0, 0x01234567, 3))
|
|
|
|
fail = 1;
|
|
|
|
if (read_eeprom(sp, 0x4F0, &ret_data))
|
|
|
|
fail = 1;
|
|
|
|
|
|
|
|
if (ret_data != 0x01234567)
|
|
|
|
fail = 1;
|
|
|
|
|
|
|
|
/* Reset the EEPROM data go FFFF */
|
|
|
|
write_eeprom(sp, 0x4F0, 0xFFFFFFFF, 3);
|
|
|
|
|
|
|
|
/* Test Write Request Error at offset 0x7c */
|
|
|
|
if (!write_eeprom(sp, 0x07C, 0, 3))
|
|
|
|
fail = 1;
|
|
|
|
|
|
|
|
/* Test Write Request at offset 0x7fc */
|
|
|
|
if (write_eeprom(sp, 0x7FC, 0x01234567, 3))
|
|
|
|
fail = 1;
|
|
|
|
if (read_eeprom(sp, 0x7FC, &ret_data))
|
|
|
|
fail = 1;
|
|
|
|
|
|
|
|
if (ret_data != 0x01234567)
|
|
|
|
fail = 1;
|
|
|
|
|
|
|
|
/* Reset the EEPROM data go FFFF */
|
|
|
|
write_eeprom(sp, 0x7FC, 0xFFFFFFFF, 3);
|
|
|
|
|
|
|
|
/* Test Write Error at offset 0x80 */
|
|
|
|
if (!write_eeprom(sp, 0x080, 0, 3))
|
|
|
|
fail = 1;
|
|
|
|
|
|
|
|
/* Test Write Error at offset 0xfc */
|
|
|
|
if (!write_eeprom(sp, 0x0FC, 0, 3))
|
|
|
|
fail = 1;
|
|
|
|
|
|
|
|
/* Test Write Error at offset 0x100 */
|
|
|
|
if (!write_eeprom(sp, 0x100, 0, 3))
|
|
|
|
fail = 1;
|
|
|
|
|
|
|
|
/* Test Write Error at offset 4ec */
|
|
|
|
if (!write_eeprom(sp, 0x4EC, 0, 3))
|
|
|
|
fail = 1;
|
|
|
|
|
|
|
|
*data = fail;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* s2io_bist_test - invokes the MemBist test of the card .
|
2005-08-03 13:24:33 -06:00
|
|
|
* @sp : private member of the device structure, which is a pointer to the
|
2005-04-16 16:20:36 -06:00
|
|
|
* s2io_nic structure.
|
2005-08-03 13:24:33 -06:00
|
|
|
* @data:variable that returns the result of each of the test conducted by
|
2005-04-16 16:20:36 -06:00
|
|
|
* the driver.
|
|
|
|
* Description:
|
|
|
|
* This invokes the MemBist test of the card. We give around
|
|
|
|
* 2 secs time for the Test to complete. If it's still not complete
|
2005-08-03 13:24:33 -06:00
|
|
|
* within this peiod, we consider that the test failed.
|
2005-04-16 16:20:36 -06:00
|
|
|
* Return value:
|
|
|
|
* 0 on success and -1 on failure.
|
|
|
|
*/
|
|
|
|
|
|
|
|
static int s2io_bist_test(nic_t * sp, uint64_t * data)
|
|
|
|
{
|
|
|
|
u8 bist = 0;
|
|
|
|
int cnt = 0, ret = -1;
|
|
|
|
|
|
|
|
pci_read_config_byte(sp->pdev, PCI_BIST, &bist);
|
|
|
|
bist |= PCI_BIST_START;
|
|
|
|
pci_write_config_word(sp->pdev, PCI_BIST, bist);
|
|
|
|
|
|
|
|
while (cnt < 20) {
|
|
|
|
pci_read_config_byte(sp->pdev, PCI_BIST, &bist);
|
|
|
|
if (!(bist & PCI_BIST_START)) {
|
|
|
|
*data = (bist & PCI_BIST_CODE_MASK);
|
|
|
|
ret = 0;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
msleep(100);
|
|
|
|
cnt++;
|
|
|
|
}
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
2005-08-03 13:24:33 -06:00
|
|
|
* s2io-link_test - verifies the link state of the nic
|
|
|
|
* @sp ; private member of the device structure, which is a pointer to the
|
2005-04-16 16:20:36 -06:00
|
|
|
* s2io_nic structure.
|
|
|
|
* @data: variable that returns the result of each of the test conducted by
|
|
|
|
* the driver.
|
|
|
|
* Description:
|
2005-08-03 13:24:33 -06:00
|
|
|
* The function verifies the link state of the NIC and updates the input
|
2005-04-16 16:20:36 -06:00
|
|
|
* argument 'data' appropriately.
|
|
|
|
* Return value:
|
|
|
|
* 0 on success.
|
|
|
|
*/
|
|
|
|
|
|
|
|
static int s2io_link_test(nic_t * sp, uint64_t * data)
|
|
|
|
{
|
|
|
|
XENA_dev_config_t __iomem *bar0 = sp->bar0;
|
|
|
|
u64 val64;
|
|
|
|
|
|
|
|
val64 = readq(&bar0->adapter_status);
|
|
|
|
if (val64 & ADAPTER_STATUS_RMAC_LOCAL_FAULT)
|
|
|
|
*data = 1;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
2005-08-03 13:24:33 -06:00
|
|
|
* s2io_rldram_test - offline test for access to the RldRam chip on the NIC
|
|
|
|
* @sp - private member of the device structure, which is a pointer to the
|
2005-04-16 16:20:36 -06:00
|
|
|
* s2io_nic structure.
|
2005-08-03 13:24:33 -06:00
|
|
|
* @data - variable that returns the result of each of the test
|
2005-04-16 16:20:36 -06:00
|
|
|
* conducted by the driver.
|
|
|
|
* Description:
|
2005-08-03 13:24:33 -06:00
|
|
|
* This is one of the offline test that tests the read and write
|
2005-04-16 16:20:36 -06:00
|
|
|
* access to the RldRam chip on the NIC.
|
|
|
|
* Return value:
|
|
|
|
* 0 on success.
|
|
|
|
*/
|
|
|
|
|
|
|
|
static int s2io_rldram_test(nic_t * sp, uint64_t * data)
|
|
|
|
{
|
|
|
|
XENA_dev_config_t __iomem *bar0 = sp->bar0;
|
|
|
|
u64 val64;
|
|
|
|
int cnt, iteration = 0, test_pass = 0;
|
|
|
|
|
|
|
|
val64 = readq(&bar0->adapter_control);
|
|
|
|
val64 &= ~ADAPTER_ECC_EN;
|
|
|
|
writeq(val64, &bar0->adapter_control);
|
|
|
|
|
|
|
|
val64 = readq(&bar0->mc_rldram_test_ctrl);
|
|
|
|
val64 |= MC_RLDRAM_TEST_MODE;
|
|
|
|
writeq(val64, &bar0->mc_rldram_test_ctrl);
|
|
|
|
|
|
|
|
val64 = readq(&bar0->mc_rldram_mrs);
|
|
|
|
val64 |= MC_RLDRAM_QUEUE_SIZE_ENABLE;
|
|
|
|
SPECIAL_REG_WRITE(val64, &bar0->mc_rldram_mrs, UF);
|
|
|
|
|
|
|
|
val64 |= MC_RLDRAM_MRS_ENABLE;
|
|
|
|
SPECIAL_REG_WRITE(val64, &bar0->mc_rldram_mrs, UF);
|
|
|
|
|
|
|
|
while (iteration < 2) {
|
|
|
|
val64 = 0x55555555aaaa0000ULL;
|
|
|
|
if (iteration == 1) {
|
|
|
|
val64 ^= 0xFFFFFFFFFFFF0000ULL;
|
|
|
|
}
|
|
|
|
writeq(val64, &bar0->mc_rldram_test_d0);
|
|
|
|
|
|
|
|
val64 = 0xaaaa5a5555550000ULL;
|
|
|
|
if (iteration == 1) {
|
|
|
|
val64 ^= 0xFFFFFFFFFFFF0000ULL;
|
|
|
|
}
|
|
|
|
writeq(val64, &bar0->mc_rldram_test_d1);
|
|
|
|
|
|
|
|
val64 = 0x55aaaaaaaa5a0000ULL;
|
|
|
|
if (iteration == 1) {
|
|
|
|
val64 ^= 0xFFFFFFFFFFFF0000ULL;
|
|
|
|
}
|
|
|
|
writeq(val64, &bar0->mc_rldram_test_d2);
|
|
|
|
|
|
|
|
val64 = (u64) (0x0000003fffff0000ULL);
|
|
|
|
writeq(val64, &bar0->mc_rldram_test_add);
|
|
|
|
|
|
|
|
|
|
|
|
val64 = MC_RLDRAM_TEST_MODE;
|
|
|
|
writeq(val64, &bar0->mc_rldram_test_ctrl);
|
|
|
|
|
|
|
|
val64 |=
|
|
|
|
MC_RLDRAM_TEST_MODE | MC_RLDRAM_TEST_WRITE |
|
|
|
|
MC_RLDRAM_TEST_GO;
|
|
|
|
writeq(val64, &bar0->mc_rldram_test_ctrl);
|
|
|
|
|
|
|
|
for (cnt = 0; cnt < 5; cnt++) {
|
|
|
|
val64 = readq(&bar0->mc_rldram_test_ctrl);
|
|
|
|
if (val64 & MC_RLDRAM_TEST_DONE)
|
|
|
|
break;
|
|
|
|
msleep(200);
|
|
|
|
}
|
|
|
|
|
|
|
|
if (cnt == 5)
|
|
|
|
break;
|
|
|
|
|
|
|
|
val64 = MC_RLDRAM_TEST_MODE;
|
|
|
|
writeq(val64, &bar0->mc_rldram_test_ctrl);
|
|
|
|
|
|
|
|
val64 |= MC_RLDRAM_TEST_MODE | MC_RLDRAM_TEST_GO;
|
|
|
|
writeq(val64, &bar0->mc_rldram_test_ctrl);
|
|
|
|
|
|
|
|
for (cnt = 0; cnt < 5; cnt++) {
|
|
|
|
val64 = readq(&bar0->mc_rldram_test_ctrl);
|
|
|
|
if (val64 & MC_RLDRAM_TEST_DONE)
|
|
|
|
break;
|
|
|
|
msleep(500);
|
|
|
|
}
|
|
|
|
|
|
|
|
if (cnt == 5)
|
|
|
|
break;
|
|
|
|
|
|
|
|
val64 = readq(&bar0->mc_rldram_test_ctrl);
|
|
|
|
if (val64 & MC_RLDRAM_TEST_PASS)
|
|
|
|
test_pass = 1;
|
|
|
|
|
|
|
|
iteration++;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (!test_pass)
|
|
|
|
*data = 1;
|
|
|
|
else
|
|
|
|
*data = 0;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* s2io_ethtool_test - conducts 6 tsets to determine the health of card.
|
|
|
|
* @sp : private member of the device structure, which is a pointer to the
|
|
|
|
* s2io_nic structure.
|
|
|
|
* @ethtest : pointer to a ethtool command specific structure that will be
|
|
|
|
* returned to the user.
|
2005-08-03 13:24:33 -06:00
|
|
|
* @data : variable that returns the result of each of the test
|
2005-04-16 16:20:36 -06:00
|
|
|
* conducted by the driver.
|
|
|
|
* Description:
|
|
|
|
* This function conducts 6 tests ( 4 offline and 2 online) to determine
|
|
|
|
* the health of the card.
|
|
|
|
* Return value:
|
|
|
|
* void
|
|
|
|
*/
|
|
|
|
|
|
|
|
static void s2io_ethtool_test(struct net_device *dev,
|
|
|
|
struct ethtool_test *ethtest,
|
|
|
|
uint64_t * data)
|
|
|
|
{
|
|
|
|
nic_t *sp = dev->priv;
|
|
|
|
int orig_state = netif_running(sp->dev);
|
|
|
|
|
|
|
|
if (ethtest->flags == ETH_TEST_FL_OFFLINE) {
|
|
|
|
/* Offline Tests. */
|
2005-08-03 13:24:33 -06:00
|
|
|
if (orig_state)
|
2005-04-16 16:20:36 -06:00
|
|
|
s2io_close(sp->dev);
|
|
|
|
|
|
|
|
if (s2io_register_test(sp, &data[0]))
|
|
|
|
ethtest->flags |= ETH_TEST_FL_FAILED;
|
|
|
|
|
|
|
|
s2io_reset(sp);
|
|
|
|
|
|
|
|
if (s2io_rldram_test(sp, &data[3]))
|
|
|
|
ethtest->flags |= ETH_TEST_FL_FAILED;
|
|
|
|
|
|
|
|
s2io_reset(sp);
|
|
|
|
|
|
|
|
if (s2io_eeprom_test(sp, &data[1]))
|
|
|
|
ethtest->flags |= ETH_TEST_FL_FAILED;
|
|
|
|
|
|
|
|
if (s2io_bist_test(sp, &data[4]))
|
|
|
|
ethtest->flags |= ETH_TEST_FL_FAILED;
|
|
|
|
|
|
|
|
if (orig_state)
|
|
|
|
s2io_open(sp->dev);
|
|
|
|
|
|
|
|
data[2] = 0;
|
|
|
|
} else {
|
|
|
|
/* Online Tests. */
|
|
|
|
if (!orig_state) {
|
|
|
|
DBG_PRINT(ERR_DBG,
|
|
|
|
"%s: is not up, cannot run test\n",
|
|
|
|
dev->name);
|
|
|
|
data[0] = -1;
|
|
|
|
data[1] = -1;
|
|
|
|
data[2] = -1;
|
|
|
|
data[3] = -1;
|
|
|
|
data[4] = -1;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (s2io_link_test(sp, &data[2]))
|
|
|
|
ethtest->flags |= ETH_TEST_FL_FAILED;
|
|
|
|
|
|
|
|
data[0] = 0;
|
|
|
|
data[1] = 0;
|
|
|
|
data[3] = 0;
|
|
|
|
data[4] = 0;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static void s2io_get_ethtool_stats(struct net_device *dev,
|
|
|
|
struct ethtool_stats *estats,
|
|
|
|
u64 * tmp_stats)
|
|
|
|
{
|
|
|
|
int i = 0;
|
|
|
|
nic_t *sp = dev->priv;
|
|
|
|
StatInfo_t *stat_info = sp->mac_control.stats_info;
|
|
|
|
|
2005-08-03 13:29:20 -06:00
|
|
|
s2io_updt_stats(sp);
|
2005-04-16 16:20:36 -06:00
|
|
|
tmp_stats[i++] = le32_to_cpu(stat_info->tmac_frms);
|
|
|
|
tmp_stats[i++] = le32_to_cpu(stat_info->tmac_data_octets);
|
|
|
|
tmp_stats[i++] = le64_to_cpu(stat_info->tmac_drop_frms);
|
|
|
|
tmp_stats[i++] = le32_to_cpu(stat_info->tmac_mcst_frms);
|
|
|
|
tmp_stats[i++] = le32_to_cpu(stat_info->tmac_bcst_frms);
|
|
|
|
tmp_stats[i++] = le64_to_cpu(stat_info->tmac_pause_ctrl_frms);
|
|
|
|
tmp_stats[i++] = le32_to_cpu(stat_info->tmac_any_err_frms);
|
|
|
|
tmp_stats[i++] = le64_to_cpu(stat_info->tmac_vld_ip_octets);
|
|
|
|
tmp_stats[i++] = le32_to_cpu(stat_info->tmac_vld_ip);
|
|
|
|
tmp_stats[i++] = le32_to_cpu(stat_info->tmac_drop_ip);
|
|
|
|
tmp_stats[i++] = le32_to_cpu(stat_info->tmac_icmp);
|
|
|
|
tmp_stats[i++] = le32_to_cpu(stat_info->tmac_rst_tcp);
|
|
|
|
tmp_stats[i++] = le64_to_cpu(stat_info->tmac_tcp);
|
|
|
|
tmp_stats[i++] = le32_to_cpu(stat_info->tmac_udp);
|
|
|
|
tmp_stats[i++] = le32_to_cpu(stat_info->rmac_vld_frms);
|
|
|
|
tmp_stats[i++] = le32_to_cpu(stat_info->rmac_data_octets);
|
|
|
|
tmp_stats[i++] = le64_to_cpu(stat_info->rmac_fcs_err_frms);
|
|
|
|
tmp_stats[i++] = le64_to_cpu(stat_info->rmac_drop_frms);
|
|
|
|
tmp_stats[i++] = le32_to_cpu(stat_info->rmac_vld_mcst_frms);
|
|
|
|
tmp_stats[i++] = le32_to_cpu(stat_info->rmac_vld_bcst_frms);
|
|
|
|
tmp_stats[i++] = le32_to_cpu(stat_info->rmac_in_rng_len_err_frms);
|
|
|
|
tmp_stats[i++] = le64_to_cpu(stat_info->rmac_long_frms);
|
|
|
|
tmp_stats[i++] = le64_to_cpu(stat_info->rmac_pause_ctrl_frms);
|
|
|
|
tmp_stats[i++] = le32_to_cpu(stat_info->rmac_discarded_frms);
|
|
|
|
tmp_stats[i++] = le32_to_cpu(stat_info->rmac_usized_frms);
|
|
|
|
tmp_stats[i++] = le32_to_cpu(stat_info->rmac_osized_frms);
|
|
|
|
tmp_stats[i++] = le32_to_cpu(stat_info->rmac_frag_frms);
|
|
|
|
tmp_stats[i++] = le32_to_cpu(stat_info->rmac_jabber_frms);
|
|
|
|
tmp_stats[i++] = le32_to_cpu(stat_info->rmac_ip);
|
|
|
|
tmp_stats[i++] = le64_to_cpu(stat_info->rmac_ip_octets);
|
|
|
|
tmp_stats[i++] = le32_to_cpu(stat_info->rmac_hdr_err_ip);
|
|
|
|
tmp_stats[i++] = le32_to_cpu(stat_info->rmac_drop_ip);
|
|
|
|
tmp_stats[i++] = le32_to_cpu(stat_info->rmac_icmp);
|
|
|
|
tmp_stats[i++] = le64_to_cpu(stat_info->rmac_tcp);
|
|
|
|
tmp_stats[i++] = le32_to_cpu(stat_info->rmac_udp);
|
|
|
|
tmp_stats[i++] = le32_to_cpu(stat_info->rmac_err_drp_udp);
|
|
|
|
tmp_stats[i++] = le32_to_cpu(stat_info->rmac_pause_cnt);
|
|
|
|
tmp_stats[i++] = le32_to_cpu(stat_info->rmac_accepted_ip);
|
|
|
|
tmp_stats[i++] = le32_to_cpu(stat_info->rmac_err_tcp);
|
2005-08-03 13:29:20 -06:00
|
|
|
tmp_stats[i++] = 0;
|
|
|
|
tmp_stats[i++] = stat_info->sw_stat.single_ecc_errs;
|
|
|
|
tmp_stats[i++] = stat_info->sw_stat.double_ecc_errs;
|
2005-04-16 16:20:36 -06:00
|
|
|
}
|
|
|
|
|
2005-08-03 13:24:33 -06:00
|
|
|
int s2io_ethtool_get_regs_len(struct net_device *dev)
|
2005-04-16 16:20:36 -06:00
|
|
|
{
|
|
|
|
return (XENA_REG_SPACE);
|
|
|
|
}
|
|
|
|
|
|
|
|
|
2005-08-03 13:24:33 -06:00
|
|
|
u32 s2io_ethtool_get_rx_csum(struct net_device * dev)
|
2005-04-16 16:20:36 -06:00
|
|
|
{
|
|
|
|
nic_t *sp = dev->priv;
|
|
|
|
|
|
|
|
return (sp->rx_csum);
|
|
|
|
}
|
2005-08-03 13:24:33 -06:00
|
|
|
int s2io_ethtool_set_rx_csum(struct net_device *dev, u32 data)
|
2005-04-16 16:20:36 -06:00
|
|
|
{
|
|
|
|
nic_t *sp = dev->priv;
|
|
|
|
|
|
|
|
if (data)
|
|
|
|
sp->rx_csum = 1;
|
|
|
|
else
|
|
|
|
sp->rx_csum = 0;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
2005-08-03 13:24:33 -06:00
|
|
|
int s2io_get_eeprom_len(struct net_device *dev)
|
2005-04-16 16:20:36 -06:00
|
|
|
{
|
|
|
|
return (XENA_EEPROM_SPACE);
|
|
|
|
}
|
|
|
|
|
2005-08-03 13:24:33 -06:00
|
|
|
int s2io_ethtool_self_test_count(struct net_device *dev)
|
2005-04-16 16:20:36 -06:00
|
|
|
{
|
|
|
|
return (S2IO_TEST_LEN);
|
|
|
|
}
|
2005-08-03 13:24:33 -06:00
|
|
|
void s2io_ethtool_get_strings(struct net_device *dev,
|
|
|
|
u32 stringset, u8 * data)
|
2005-04-16 16:20:36 -06:00
|
|
|
{
|
|
|
|
switch (stringset) {
|
|
|
|
case ETH_SS_TEST:
|
|
|
|
memcpy(data, s2io_gstrings, S2IO_STRINGS_LEN);
|
|
|
|
break;
|
|
|
|
case ETH_SS_STATS:
|
|
|
|
memcpy(data, ðtool_stats_keys,
|
|
|
|
sizeof(ethtool_stats_keys));
|
|
|
|
}
|
|
|
|
}
|
|
|
|
static int s2io_ethtool_get_stats_count(struct net_device *dev)
|
|
|
|
{
|
|
|
|
return (S2IO_STAT_LEN);
|
|
|
|
}
|
|
|
|
|
2005-08-03 13:24:33 -06:00
|
|
|
int s2io_ethtool_op_set_tx_csum(struct net_device *dev, u32 data)
|
2005-04-16 16:20:36 -06:00
|
|
|
{
|
|
|
|
if (data)
|
|
|
|
dev->features |= NETIF_F_IP_CSUM;
|
|
|
|
else
|
|
|
|
dev->features &= ~NETIF_F_IP_CSUM;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
static struct ethtool_ops netdev_ethtool_ops = {
|
|
|
|
.get_settings = s2io_ethtool_gset,
|
|
|
|
.set_settings = s2io_ethtool_sset,
|
|
|
|
.get_drvinfo = s2io_ethtool_gdrvinfo,
|
|
|
|
.get_regs_len = s2io_ethtool_get_regs_len,
|
|
|
|
.get_regs = s2io_ethtool_gregs,
|
|
|
|
.get_link = ethtool_op_get_link,
|
|
|
|
.get_eeprom_len = s2io_get_eeprom_len,
|
|
|
|
.get_eeprom = s2io_ethtool_geeprom,
|
|
|
|
.set_eeprom = s2io_ethtool_seeprom,
|
|
|
|
.get_pauseparam = s2io_ethtool_getpause_data,
|
|
|
|
.set_pauseparam = s2io_ethtool_setpause_data,
|
|
|
|
.get_rx_csum = s2io_ethtool_get_rx_csum,
|
|
|
|
.set_rx_csum = s2io_ethtool_set_rx_csum,
|
|
|
|
.get_tx_csum = ethtool_op_get_tx_csum,
|
|
|
|
.set_tx_csum = s2io_ethtool_op_set_tx_csum,
|
|
|
|
.get_sg = ethtool_op_get_sg,
|
|
|
|
.set_sg = ethtool_op_set_sg,
|
|
|
|
#ifdef NETIF_F_TSO
|
|
|
|
.get_tso = ethtool_op_get_tso,
|
|
|
|
.set_tso = ethtool_op_set_tso,
|
|
|
|
#endif
|
|
|
|
.self_test_count = s2io_ethtool_self_test_count,
|
|
|
|
.self_test = s2io_ethtool_test,
|
|
|
|
.get_strings = s2io_ethtool_get_strings,
|
|
|
|
.phys_id = s2io_ethtool_idnic,
|
|
|
|
.get_stats_count = s2io_ethtool_get_stats_count,
|
|
|
|
.get_ethtool_stats = s2io_get_ethtool_stats
|
|
|
|
};
|
|
|
|
|
|
|
|
/**
|
2005-08-03 13:24:33 -06:00
|
|
|
* s2io_ioctl - Entry point for the Ioctl
|
2005-04-16 16:20:36 -06:00
|
|
|
* @dev : Device pointer.
|
|
|
|
* @ifr : An IOCTL specefic structure, that can contain a pointer to
|
|
|
|
* a proprietary structure used to pass information to the driver.
|
|
|
|
* @cmd : This is used to distinguish between the different commands that
|
|
|
|
* can be passed to the IOCTL functions.
|
|
|
|
* Description:
|
2005-08-03 13:24:33 -06:00
|
|
|
* Currently there are no special functionality supported in IOCTL, hence
|
|
|
|
* function always return EOPNOTSUPPORTED
|
2005-04-16 16:20:36 -06:00
|
|
|
*/
|
|
|
|
|
2005-08-03 13:24:33 -06:00
|
|
|
int s2io_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
|
2005-04-16 16:20:36 -06:00
|
|
|
{
|
|
|
|
return -EOPNOTSUPP;
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* s2io_change_mtu - entry point to change MTU size for the device.
|
|
|
|
* @dev : device pointer.
|
|
|
|
* @new_mtu : the new MTU size for the device.
|
|
|
|
* Description: A driver entry point to change MTU size for the device.
|
|
|
|
* Before changing the MTU the device must be stopped.
|
|
|
|
* Return value:
|
|
|
|
* 0 on success and an appropriate (-)ve integer as defined in errno.h
|
|
|
|
* file on failure.
|
|
|
|
*/
|
|
|
|
|
2005-08-03 13:24:33 -06:00
|
|
|
int s2io_change_mtu(struct net_device *dev, int new_mtu)
|
2005-04-16 16:20:36 -06:00
|
|
|
{
|
|
|
|
nic_t *sp = dev->priv;
|
|
|
|
|
|
|
|
if ((new_mtu < MIN_MTU) || (new_mtu > S2IO_JUMBO_SIZE)) {
|
|
|
|
DBG_PRINT(ERR_DBG, "%s: MTU size is invalid.\n",
|
|
|
|
dev->name);
|
|
|
|
return -EPERM;
|
|
|
|
}
|
|
|
|
|
|
|
|
dev->mtu = new_mtu;
|
2005-08-03 13:33:12 -06:00
|
|
|
if (netif_running(dev)) {
|
|
|
|
s2io_card_down(sp);
|
|
|
|
netif_stop_queue(dev);
|
|
|
|
if (s2io_card_up(sp)) {
|
|
|
|
DBG_PRINT(ERR_DBG, "%s: Device bring up failed\n",
|
|
|
|
__FUNCTION__);
|
|
|
|
}
|
|
|
|
if (netif_queue_stopped(dev))
|
|
|
|
netif_wake_queue(dev);
|
|
|
|
} else { /* Device is down */
|
|
|
|
XENA_dev_config_t __iomem *bar0 = sp->bar0;
|
|
|
|
u64 val64 = new_mtu;
|
|
|
|
|
|
|
|
writeq(vBIT(val64, 2, 14), &bar0->rmac_max_pyld_len);
|
|
|
|
}
|
2005-04-16 16:20:36 -06:00
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* s2io_tasklet - Bottom half of the ISR.
|
|
|
|
* @dev_adr : address of the device structure in dma_addr_t format.
|
|
|
|
* Description:
|
|
|
|
* This is the tasklet or the bottom half of the ISR. This is
|
2005-08-03 13:24:33 -06:00
|
|
|
* an extension of the ISR which is scheduled by the scheduler to be run
|
2005-04-16 16:20:36 -06:00
|
|
|
* when the load on the CPU is low. All low priority tasks of the ISR can
|
2005-08-03 13:24:33 -06:00
|
|
|
* be pushed into the tasklet. For now the tasklet is used only to
|
2005-04-16 16:20:36 -06:00
|
|
|
* replenish the Rx buffers in the Rx buffer descriptors.
|
|
|
|
* Return value:
|
|
|
|
* void.
|
|
|
|
*/
|
|
|
|
|
|
|
|
static void s2io_tasklet(unsigned long dev_addr)
|
|
|
|
{
|
|
|
|
struct net_device *dev = (struct net_device *) dev_addr;
|
|
|
|
nic_t *sp = dev->priv;
|
|
|
|
int i, ret;
|
|
|
|
mac_info_t *mac_control;
|
|
|
|
struct config_param *config;
|
|
|
|
|
|
|
|
mac_control = &sp->mac_control;
|
|
|
|
config = &sp->config;
|
|
|
|
|
|
|
|
if (!TASKLET_IN_USE) {
|
|
|
|
for (i = 0; i < config->rx_ring_num; i++) {
|
|
|
|
ret = fill_rx_buffers(sp, i);
|
|
|
|
if (ret == -ENOMEM) {
|
|
|
|
DBG_PRINT(ERR_DBG, "%s: Out of ",
|
|
|
|
dev->name);
|
|
|
|
DBG_PRINT(ERR_DBG, "memory in tasklet\n");
|
|
|
|
break;
|
|
|
|
} else if (ret == -EFILL) {
|
|
|
|
DBG_PRINT(ERR_DBG,
|
|
|
|
"%s: Rx Ring %d is full\n",
|
|
|
|
dev->name, i);
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
clear_bit(0, (&sp->tasklet_status));
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* s2io_set_link - Set the LInk status
|
|
|
|
* @data: long pointer to device private structue
|
|
|
|
* Description: Sets the link status for the adapter
|
|
|
|
*/
|
|
|
|
|
|
|
|
static void s2io_set_link(unsigned long data)
|
|
|
|
{
|
|
|
|
nic_t *nic = (nic_t *) data;
|
|
|
|
struct net_device *dev = nic->dev;
|
|
|
|
XENA_dev_config_t __iomem *bar0 = nic->bar0;
|
|
|
|
register u64 val64;
|
|
|
|
u16 subid;
|
|
|
|
|
|
|
|
if (test_and_set_bit(0, &(nic->link_state))) {
|
|
|
|
/* The card is being reset, no point doing anything */
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
subid = nic->pdev->subsystem_device;
|
2005-08-03 13:24:33 -06:00
|
|
|
/*
|
|
|
|
* Allow a small delay for the NICs self initiated
|
2005-04-16 16:20:36 -06:00
|
|
|
* cleanup to complete.
|
|
|
|
*/
|
|
|
|
msleep(100);
|
|
|
|
|
|
|
|
val64 = readq(&bar0->adapter_status);
|
2005-08-03 13:24:33 -06:00
|
|
|
if (verify_xena_quiescence(nic, val64, nic->device_enabled_once)) {
|
2005-04-16 16:20:36 -06:00
|
|
|
if (LINK_IS_UP(val64)) {
|
|
|
|
val64 = readq(&bar0->adapter_control);
|
|
|
|
val64 |= ADAPTER_CNTL_EN;
|
|
|
|
writeq(val64, &bar0->adapter_control);
|
|
|
|
if (CARDS_WITH_FAULTY_LINK_INDICATORS(subid)) {
|
|
|
|
val64 = readq(&bar0->gpio_control);
|
|
|
|
val64 |= GPIO_CTRL_GPIO_0;
|
|
|
|
writeq(val64, &bar0->gpio_control);
|
|
|
|
val64 = readq(&bar0->gpio_control);
|
|
|
|
} else {
|
|
|
|
val64 |= ADAPTER_LED_ON;
|
|
|
|
writeq(val64, &bar0->adapter_control);
|
|
|
|
}
|
|
|
|
val64 = readq(&bar0->adapter_status);
|
|
|
|
if (!LINK_IS_UP(val64)) {
|
|
|
|
DBG_PRINT(ERR_DBG, "%s:", dev->name);
|
|
|
|
DBG_PRINT(ERR_DBG, " Link down");
|
|
|
|
DBG_PRINT(ERR_DBG, "after ");
|
|
|
|
DBG_PRINT(ERR_DBG, "enabling ");
|
|
|
|
DBG_PRINT(ERR_DBG, "device \n");
|
|
|
|
}
|
|
|
|
if (nic->device_enabled_once == FALSE) {
|
|
|
|
nic->device_enabled_once = TRUE;
|
|
|
|
}
|
|
|
|
s2io_link(nic, LINK_UP);
|
|
|
|
} else {
|
|
|
|
if (CARDS_WITH_FAULTY_LINK_INDICATORS(subid)) {
|
|
|
|
val64 = readq(&bar0->gpio_control);
|
|
|
|
val64 &= ~GPIO_CTRL_GPIO_0;
|
|
|
|
writeq(val64, &bar0->gpio_control);
|
|
|
|
val64 = readq(&bar0->gpio_control);
|
|
|
|
}
|
|
|
|
s2io_link(nic, LINK_DOWN);
|
|
|
|
}
|
|
|
|
} else { /* NIC is not Quiescent. */
|
|
|
|
DBG_PRINT(ERR_DBG, "%s: Error: ", dev->name);
|
|
|
|
DBG_PRINT(ERR_DBG, "device is not Quiescent\n");
|
|
|
|
netif_stop_queue(dev);
|
|
|
|
}
|
|
|
|
clear_bit(0, &(nic->link_state));
|
|
|
|
}
|
|
|
|
|
|
|
|
static void s2io_card_down(nic_t * sp)
|
|
|
|
{
|
|
|
|
int cnt = 0;
|
|
|
|
XENA_dev_config_t __iomem *bar0 = sp->bar0;
|
|
|
|
unsigned long flags;
|
|
|
|
register u64 val64 = 0;
|
|
|
|
|
2005-08-03 13:34:11 -06:00
|
|
|
del_timer_sync(&sp->alarm_timer);
|
2005-04-16 16:20:36 -06:00
|
|
|
/* If s2io_set_link task is executing, wait till it completes. */
|
2005-08-03 13:24:33 -06:00
|
|
|
while (test_and_set_bit(0, &(sp->link_state))) {
|
2005-04-16 16:20:36 -06:00
|
|
|
msleep(50);
|
2005-08-03 13:24:33 -06:00
|
|
|
}
|
2005-04-16 16:20:36 -06:00
|
|
|
atomic_set(&sp->card_state, CARD_DOWN);
|
|
|
|
|
|
|
|
/* disable Tx and Rx traffic on the NIC */
|
|
|
|
stop_nic(sp);
|
|
|
|
|
|
|
|
/* Kill tasklet. */
|
|
|
|
tasklet_kill(&sp->task);
|
|
|
|
|
|
|
|
/* Check if the device is Quiescent and then Reset the NIC */
|
|
|
|
do {
|
|
|
|
val64 = readq(&bar0->adapter_status);
|
2005-08-03 13:24:33 -06:00
|
|
|
if (verify_xena_quiescence(sp, val64, sp->device_enabled_once)) {
|
2005-04-16 16:20:36 -06:00
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
msleep(50);
|
|
|
|
cnt++;
|
|
|
|
if (cnt == 10) {
|
|
|
|
DBG_PRINT(ERR_DBG,
|
|
|
|
"s2io_close:Device not Quiescent ");
|
|
|
|
DBG_PRINT(ERR_DBG, "adaper status reads 0x%llx\n",
|
|
|
|
(unsigned long long) val64);
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
} while (1);
|
|
|
|
s2io_reset(sp);
|
|
|
|
|
2005-08-03 13:29:20 -06:00
|
|
|
/* Waiting till all Interrupt handlers are complete */
|
|
|
|
cnt = 0;
|
|
|
|
do {
|
|
|
|
msleep(10);
|
|
|
|
if (!atomic_read(&sp->isr_cnt))
|
|
|
|
break;
|
|
|
|
cnt++;
|
|
|
|
} while(cnt < 5);
|
|
|
|
|
|
|
|
spin_lock_irqsave(&sp->tx_lock, flags);
|
|
|
|
/* Free all Tx buffers */
|
2005-04-16 16:20:36 -06:00
|
|
|
free_tx_buffers(sp);
|
2005-08-03 13:29:20 -06:00
|
|
|
spin_unlock_irqrestore(&sp->tx_lock, flags);
|
|
|
|
|
|
|
|
/* Free all Rx buffers */
|
|
|
|
spin_lock_irqsave(&sp->rx_lock, flags);
|
2005-04-16 16:20:36 -06:00
|
|
|
free_rx_buffers(sp);
|
2005-08-03 13:29:20 -06:00
|
|
|
spin_unlock_irqrestore(&sp->rx_lock, flags);
|
2005-04-16 16:20:36 -06:00
|
|
|
|
|
|
|
clear_bit(0, &(sp->link_state));
|
|
|
|
}
|
|
|
|
|
|
|
|
static int s2io_card_up(nic_t * sp)
|
|
|
|
{
|
|
|
|
int i, ret;
|
|
|
|
mac_info_t *mac_control;
|
|
|
|
struct config_param *config;
|
|
|
|
struct net_device *dev = (struct net_device *) sp->dev;
|
|
|
|
|
|
|
|
/* Initialize the H/W I/O registers */
|
|
|
|
if (init_nic(sp) != 0) {
|
|
|
|
DBG_PRINT(ERR_DBG, "%s: H/W initialization failed\n",
|
|
|
|
dev->name);
|
|
|
|
return -ENODEV;
|
|
|
|
}
|
|
|
|
|
2005-08-03 13:24:33 -06:00
|
|
|
/*
|
|
|
|
* Initializing the Rx buffers. For now we are considering only 1
|
2005-04-16 16:20:36 -06:00
|
|
|
* Rx ring and initializing buffers into 30 Rx blocks
|
|
|
|
*/
|
|
|
|
mac_control = &sp->mac_control;
|
|
|
|
config = &sp->config;
|
|
|
|
|
|
|
|
for (i = 0; i < config->rx_ring_num; i++) {
|
|
|
|
if ((ret = fill_rx_buffers(sp, i))) {
|
|
|
|
DBG_PRINT(ERR_DBG, "%s: Out of memory in Open\n",
|
|
|
|
dev->name);
|
|
|
|
s2io_reset(sp);
|
|
|
|
free_rx_buffers(sp);
|
|
|
|
return -ENOMEM;
|
|
|
|
}
|
|
|
|
DBG_PRINT(INFO_DBG, "Buf in ring:%d is %d:\n", i,
|
|
|
|
atomic_read(&sp->rx_bufs_left[i]));
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Setting its receive mode */
|
|
|
|
s2io_set_multicast(dev);
|
|
|
|
|
|
|
|
/* Enable tasklet for the device */
|
|
|
|
tasklet_init(&sp->task, s2io_tasklet, (unsigned long) dev);
|
|
|
|
|
|
|
|
/* Enable Rx Traffic and interrupts on the NIC */
|
|
|
|
if (start_nic(sp)) {
|
|
|
|
DBG_PRINT(ERR_DBG, "%s: Starting NIC failed\n", dev->name);
|
|
|
|
tasklet_kill(&sp->task);
|
|
|
|
s2io_reset(sp);
|
|
|
|
free_irq(dev->irq, dev);
|
|
|
|
free_rx_buffers(sp);
|
|
|
|
return -ENODEV;
|
|
|
|
}
|
|
|
|
|
2005-08-03 13:34:11 -06:00
|
|
|
S2IO_TIMER_CONF(sp->alarm_timer, s2io_alarm_handle, sp, (HZ/2));
|
|
|
|
|
2005-04-16 16:20:36 -06:00
|
|
|
atomic_set(&sp->card_state, CARD_UP);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2005-08-03 13:24:33 -06:00
|
|
|
/**
|
2005-04-16 16:20:36 -06:00
|
|
|
* s2io_restart_nic - Resets the NIC.
|
|
|
|
* @data : long pointer to the device private structure
|
|
|
|
* Description:
|
|
|
|
* This function is scheduled to be run by the s2io_tx_watchdog
|
2005-08-03 13:24:33 -06:00
|
|
|
* function after 0.5 secs to reset the NIC. The idea is to reduce
|
2005-04-16 16:20:36 -06:00
|
|
|
* the run time of the watch dog routine which is run holding a
|
|
|
|
* spin lock.
|
|
|
|
*/
|
|
|
|
|
|
|
|
static void s2io_restart_nic(unsigned long data)
|
|
|
|
{
|
|
|
|
struct net_device *dev = (struct net_device *) data;
|
|
|
|
nic_t *sp = dev->priv;
|
|
|
|
|
|
|
|
s2io_card_down(sp);
|
|
|
|
if (s2io_card_up(sp)) {
|
|
|
|
DBG_PRINT(ERR_DBG, "%s: Device bring up failed\n",
|
|
|
|
dev->name);
|
|
|
|
}
|
|
|
|
netif_wake_queue(dev);
|
|
|
|
DBG_PRINT(ERR_DBG, "%s: was reset by Tx watchdog timer\n",
|
|
|
|
dev->name);
|
2005-08-03 13:24:33 -06:00
|
|
|
|
2005-04-16 16:20:36 -06:00
|
|
|
}
|
|
|
|
|
2005-08-03 13:24:33 -06:00
|
|
|
/**
|
|
|
|
* s2io_tx_watchdog - Watchdog for transmit side.
|
2005-04-16 16:20:36 -06:00
|
|
|
* @dev : Pointer to net device structure
|
|
|
|
* Description:
|
|
|
|
* This function is triggered if the Tx Queue is stopped
|
|
|
|
* for a pre-defined amount of time when the Interface is still up.
|
|
|
|
* If the Interface is jammed in such a situation, the hardware is
|
|
|
|
* reset (by s2io_close) and restarted again (by s2io_open) to
|
|
|
|
* overcome any problem that might have been caused in the hardware.
|
|
|
|
* Return value:
|
|
|
|
* void
|
|
|
|
*/
|
|
|
|
|
|
|
|
static void s2io_tx_watchdog(struct net_device *dev)
|
|
|
|
{
|
|
|
|
nic_t *sp = dev->priv;
|
|
|
|
|
|
|
|
if (netif_carrier_ok(dev)) {
|
|
|
|
schedule_work(&sp->rst_timer_task);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* rx_osm_handler - To perform some OS related operations on SKB.
|
|
|
|
* @sp: private member of the device structure,pointer to s2io_nic structure.
|
|
|
|
* @skb : the socket buffer pointer.
|
|
|
|
* @len : length of the packet
|
|
|
|
* @cksum : FCS checksum of the frame.
|
|
|
|
* @ring_no : the ring from which this RxD was extracted.
|
2005-08-03 13:24:33 -06:00
|
|
|
* Description:
|
2005-04-16 16:20:36 -06:00
|
|
|
* This function is called by the Tx interrupt serivce routine to perform
|
|
|
|
* some OS related operations on the SKB before passing it to the upper
|
|
|
|
* layers. It mainly checks if the checksum is OK, if so adds it to the
|
|
|
|
* SKBs cksum variable, increments the Rx packet count and passes the SKB
|
|
|
|
* to the upper layer. If the checksum is wrong, it increments the Rx
|
|
|
|
* packet error count, frees the SKB and returns error.
|
|
|
|
* Return value:
|
|
|
|
* SUCCESS on success and -1 on failure.
|
|
|
|
*/
|
2005-08-03 13:24:33 -06:00
|
|
|
static int rx_osm_handler(ring_info_t *ring_data, RxD_t * rxdp)
|
2005-04-16 16:20:36 -06:00
|
|
|
{
|
2005-08-03 13:24:33 -06:00
|
|
|
nic_t *sp = ring_data->nic;
|
2005-04-16 16:20:36 -06:00
|
|
|
struct net_device *dev = (struct net_device *) sp->dev;
|
2005-08-03 13:24:33 -06:00
|
|
|
struct sk_buff *skb = (struct sk_buff *)
|
|
|
|
((unsigned long) rxdp->Host_Control);
|
|
|
|
int ring_no = ring_data->ring_no;
|
2005-04-16 16:20:36 -06:00
|
|
|
u16 l3_csum, l4_csum;
|
|
|
|
#ifdef CONFIG_2BUFF_MODE
|
2005-08-03 13:24:33 -06:00
|
|
|
int buf0_len = RXD_GET_BUFFER0_SIZE(rxdp->Control_2);
|
|
|
|
int buf2_len = RXD_GET_BUFFER2_SIZE(rxdp->Control_2);
|
|
|
|
int get_block = ring_data->rx_curr_get_info.block_index;
|
|
|
|
int get_off = ring_data->rx_curr_get_info.offset;
|
|
|
|
buffAdd_t *ba = &ring_data->ba[get_block][get_off];
|
2005-04-16 16:20:36 -06:00
|
|
|
unsigned char *buff;
|
2005-08-03 13:24:33 -06:00
|
|
|
#else
|
|
|
|
u16 len = (u16) ((RXD_GET_BUFFER0_SIZE(rxdp->Control_2)) >> 48);;
|
2005-04-16 16:20:36 -06:00
|
|
|
#endif
|
2005-08-03 13:24:33 -06:00
|
|
|
skb->dev = dev;
|
|
|
|
if (rxdp->Control_1 & RXD_T_CODE) {
|
|
|
|
unsigned long long err = rxdp->Control_1 & RXD_T_CODE;
|
|
|
|
DBG_PRINT(ERR_DBG, "%s: Rx error Value: 0x%llx\n",
|
|
|
|
dev->name, err);
|
2005-08-03 13:30:43 -06:00
|
|
|
dev_kfree_skb(skb);
|
|
|
|
sp->stats.rx_crc_errors++;
|
|
|
|
atomic_dec(&sp->rx_bufs_left[ring_no]);
|
|
|
|
rxdp->Host_Control = 0;
|
|
|
|
return 0;
|
2005-08-03 13:24:33 -06:00
|
|
|
}
|
2005-04-16 16:20:36 -06:00
|
|
|
|
2005-08-03 13:24:33 -06:00
|
|
|
/* Updating statistics */
|
|
|
|
rxdp->Host_Control = 0;
|
|
|
|
sp->rx_pkt_count++;
|
|
|
|
sp->stats.rx_packets++;
|
|
|
|
#ifndef CONFIG_2BUFF_MODE
|
|
|
|
sp->stats.rx_bytes += len;
|
|
|
|
#else
|
|
|
|
sp->stats.rx_bytes += buf0_len + buf2_len;
|
|
|
|
#endif
|
|
|
|
|
|
|
|
#ifndef CONFIG_2BUFF_MODE
|
|
|
|
skb_put(skb, len);
|
|
|
|
#else
|
|
|
|
buff = skb_push(skb, buf0_len);
|
|
|
|
memcpy(buff, ba->ba_0, buf0_len);
|
|
|
|
skb_put(skb, buf2_len);
|
|
|
|
#endif
|
|
|
|
|
|
|
|
if ((rxdp->Control_1 & TCP_OR_UDP_FRAME) &&
|
|
|
|
(sp->rx_csum)) {
|
|
|
|
l3_csum = RXD_GET_L3_CKSUM(rxdp->Control_1);
|
2005-04-16 16:20:36 -06:00
|
|
|
l4_csum = RXD_GET_L4_CKSUM(rxdp->Control_1);
|
|
|
|
if ((l3_csum == L3_CKSUM_OK) && (l4_csum == L4_CKSUM_OK)) {
|
2005-08-03 13:24:33 -06:00
|
|
|
/*
|
2005-04-16 16:20:36 -06:00
|
|
|
* NIC verifies if the Checksum of the received
|
|
|
|
* frame is Ok or not and accordingly returns
|
|
|
|
* a flag in the RxD.
|
|
|
|
*/
|
|
|
|
skb->ip_summed = CHECKSUM_UNNECESSARY;
|
|
|
|
} else {
|
2005-08-03 13:24:33 -06:00
|
|
|
/*
|
|
|
|
* Packet with erroneous checksum, let the
|
2005-04-16 16:20:36 -06:00
|
|
|
* upper layers deal with it.
|
|
|
|
*/
|
|
|
|
skb->ip_summed = CHECKSUM_NONE;
|
|
|
|
}
|
|
|
|
} else {
|
|
|
|
skb->ip_summed = CHECKSUM_NONE;
|
|
|
|
}
|
|
|
|
|
|
|
|
skb->protocol = eth_type_trans(skb, dev);
|
|
|
|
#ifdef CONFIG_S2IO_NAPI
|
2005-08-03 13:35:55 -06:00
|
|
|
if (sp->vlgrp && RXD_GET_VLAN_TAG(rxdp->Control_2)) {
|
|
|
|
/* Queueing the vlan frame to the upper layer */
|
|
|
|
vlan_hwaccel_receive_skb(skb, sp->vlgrp,
|
|
|
|
RXD_GET_VLAN_TAG(rxdp->Control_2));
|
|
|
|
} else {
|
|
|
|
netif_receive_skb(skb);
|
|
|
|
}
|
2005-04-16 16:20:36 -06:00
|
|
|
#else
|
2005-08-03 13:35:55 -06:00
|
|
|
if (sp->vlgrp && RXD_GET_VLAN_TAG(rxdp->Control_2)) {
|
|
|
|
/* Queueing the vlan frame to the upper layer */
|
|
|
|
vlan_hwaccel_rx(skb, sp->vlgrp,
|
|
|
|
RXD_GET_VLAN_TAG(rxdp->Control_2));
|
|
|
|
} else {
|
|
|
|
netif_rx(skb);
|
|
|
|
}
|
2005-04-16 16:20:36 -06:00
|
|
|
#endif
|
2005-08-03 13:35:55 -06:00
|
|
|
|
2005-04-16 16:20:36 -06:00
|
|
|
dev->last_rx = jiffies;
|
|
|
|
atomic_dec(&sp->rx_bufs_left[ring_no]);
|
|
|
|
return SUCCESS;
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* s2io_link - stops/starts the Tx queue.
|
|
|
|
* @sp : private member of the device structure, which is a pointer to the
|
|
|
|
* s2io_nic structure.
|
|
|
|
* @link : inidicates whether link is UP/DOWN.
|
|
|
|
* Description:
|
|
|
|
* This function stops/starts the Tx queue depending on whether the link
|
2005-08-03 13:24:33 -06:00
|
|
|
* status of the NIC is is down or up. This is called by the Alarm
|
|
|
|
* interrupt handler whenever a link change interrupt comes up.
|
2005-04-16 16:20:36 -06:00
|
|
|
* Return value:
|
|
|
|
* void.
|
|
|
|
*/
|
|
|
|
|
2005-08-03 13:24:33 -06:00
|
|
|
void s2io_link(nic_t * sp, int link)
|
2005-04-16 16:20:36 -06:00
|
|
|
{
|
|
|
|
struct net_device *dev = (struct net_device *) sp->dev;
|
|
|
|
|
|
|
|
if (link != sp->last_link_state) {
|
|
|
|
if (link == LINK_DOWN) {
|
|
|
|
DBG_PRINT(ERR_DBG, "%s: Link down\n", dev->name);
|
|
|
|
netif_carrier_off(dev);
|
|
|
|
} else {
|
|
|
|
DBG_PRINT(ERR_DBG, "%s: Link Up\n", dev->name);
|
|
|
|
netif_carrier_on(dev);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
sp->last_link_state = link;
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
2005-08-03 13:24:33 -06:00
|
|
|
* get_xena_rev_id - to identify revision ID of xena.
|
|
|
|
* @pdev : PCI Dev structure
|
|
|
|
* Description:
|
|
|
|
* Function to identify the Revision ID of xena.
|
|
|
|
* Return value:
|
|
|
|
* returns the revision ID of the device.
|
|
|
|
*/
|
|
|
|
|
|
|
|
int get_xena_rev_id(struct pci_dev *pdev)
|
|
|
|
{
|
|
|
|
u8 id = 0;
|
|
|
|
int ret;
|
|
|
|
ret = pci_read_config_byte(pdev, PCI_REVISION_ID, (u8 *) & id);
|
|
|
|
return id;
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* s2io_init_pci -Initialization of PCI and PCI-X configuration registers .
|
|
|
|
* @sp : private member of the device structure, which is a pointer to the
|
2005-04-16 16:20:36 -06:00
|
|
|
* s2io_nic structure.
|
|
|
|
* Description:
|
|
|
|
* This function initializes a few of the PCI and PCI-X configuration registers
|
|
|
|
* with recommended values.
|
|
|
|
* Return value:
|
|
|
|
* void
|
|
|
|
*/
|
|
|
|
|
|
|
|
static void s2io_init_pci(nic_t * sp)
|
|
|
|
{
|
2005-08-03 13:24:33 -06:00
|
|
|
u16 pci_cmd = 0, pcix_cmd = 0;
|
2005-04-16 16:20:36 -06:00
|
|
|
|
|
|
|
/* Enable Data Parity Error Recovery in PCI-X command register. */
|
|
|
|
pci_read_config_word(sp->pdev, PCIX_COMMAND_REGISTER,
|
2005-08-03 13:24:33 -06:00
|
|
|
&(pcix_cmd));
|
2005-04-16 16:20:36 -06:00
|
|
|
pci_write_config_word(sp->pdev, PCIX_COMMAND_REGISTER,
|
2005-08-03 13:24:33 -06:00
|
|
|
(pcix_cmd | 1));
|
2005-04-16 16:20:36 -06:00
|
|
|
pci_read_config_word(sp->pdev, PCIX_COMMAND_REGISTER,
|
2005-08-03 13:24:33 -06:00
|
|
|
&(pcix_cmd));
|
2005-04-16 16:20:36 -06:00
|
|
|
|
|
|
|
/* Set the PErr Response bit in PCI command register. */
|
|
|
|
pci_read_config_word(sp->pdev, PCI_COMMAND, &pci_cmd);
|
|
|
|
pci_write_config_word(sp->pdev, PCI_COMMAND,
|
|
|
|
(pci_cmd | PCI_COMMAND_PARITY));
|
|
|
|
pci_read_config_word(sp->pdev, PCI_COMMAND, &pci_cmd);
|
|
|
|
|
|
|
|
/* Forcibly disabling relaxed ordering capability of the card. */
|
2005-08-03 13:24:33 -06:00
|
|
|
pcix_cmd &= 0xfffd;
|
2005-04-16 16:20:36 -06:00
|
|
|
pci_write_config_word(sp->pdev, PCIX_COMMAND_REGISTER,
|
2005-08-03 13:24:33 -06:00
|
|
|
pcix_cmd);
|
2005-04-16 16:20:36 -06:00
|
|
|
pci_read_config_word(sp->pdev, PCIX_COMMAND_REGISTER,
|
2005-08-03 13:24:33 -06:00
|
|
|
&(pcix_cmd));
|
2005-04-16 16:20:36 -06:00
|
|
|
}
|
|
|
|
|
|
|
|
MODULE_AUTHOR("Raghavendra Koushik <raghavendra.koushik@neterion.com>");
|
|
|
|
MODULE_LICENSE("GPL");
|
|
|
|
module_param(tx_fifo_num, int, 0);
|
|
|
|
module_param(rx_ring_num, int, 0);
|
2005-08-03 13:24:33 -06:00
|
|
|
module_param_array(tx_fifo_len, uint, NULL, 0);
|
|
|
|
module_param_array(rx_ring_sz, uint, NULL, 0);
|
|
|
|
module_param_array(rts_frm_len, uint, NULL, 0);
|
2005-08-03 13:27:09 -06:00
|
|
|
module_param(use_continuous_tx_intrs, int, 1);
|
2005-04-16 16:20:36 -06:00
|
|
|
module_param(rmac_pause_time, int, 0);
|
|
|
|
module_param(mc_pause_threshold_q0q3, int, 0);
|
|
|
|
module_param(mc_pause_threshold_q4q7, int, 0);
|
|
|
|
module_param(shared_splits, int, 0);
|
|
|
|
module_param(tmac_util_period, int, 0);
|
|
|
|
module_param(rmac_util_period, int, 0);
|
|
|
|
#ifndef CONFIG_S2IO_NAPI
|
|
|
|
module_param(indicate_max_pkts, int, 0);
|
|
|
|
#endif
|
2005-08-03 13:24:33 -06:00
|
|
|
|
2005-04-16 16:20:36 -06:00
|
|
|
/**
|
2005-08-03 13:24:33 -06:00
|
|
|
* s2io_init_nic - Initialization of the adapter .
|
2005-04-16 16:20:36 -06:00
|
|
|
* @pdev : structure containing the PCI related information of the device.
|
|
|
|
* @pre: List of PCI devices supported by the driver listed in s2io_tbl.
|
|
|
|
* Description:
|
|
|
|
* The function initializes an adapter identified by the pci_dec structure.
|
2005-08-03 13:24:33 -06:00
|
|
|
* All OS related initialization including memory and device structure and
|
|
|
|
* initlaization of the device private variable is done. Also the swapper
|
|
|
|
* control register is initialized to enable read and write into the I/O
|
2005-04-16 16:20:36 -06:00
|
|
|
* registers of the device.
|
|
|
|
* Return value:
|
|
|
|
* returns 0 on success and negative on failure.
|
|
|
|
*/
|
|
|
|
|
|
|
|
static int __devinit
|
|
|
|
s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre)
|
|
|
|
{
|
|
|
|
nic_t *sp;
|
|
|
|
struct net_device *dev;
|
|
|
|
int i, j, ret;
|
|
|
|
int dma_flag = FALSE;
|
|
|
|
u32 mac_up, mac_down;
|
|
|
|
u64 val64 = 0, tmp64 = 0;
|
|
|
|
XENA_dev_config_t __iomem *bar0 = NULL;
|
|
|
|
u16 subid;
|
|
|
|
mac_info_t *mac_control;
|
|
|
|
struct config_param *config;
|
|
|
|
|
2005-08-03 13:24:33 -06:00
|
|
|
#ifdef CONFIG_S2IO_NAPI
|
|
|
|
DBG_PRINT(ERR_DBG, "NAPI support has been enabled\n");
|
|
|
|
#endif
|
2005-04-16 16:20:36 -06:00
|
|
|
|
|
|
|
if ((ret = pci_enable_device(pdev))) {
|
|
|
|
DBG_PRINT(ERR_DBG,
|
|
|
|
"s2io_init_nic: pci_enable_device failed\n");
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
2005-06-26 16:22:14 -06:00
|
|
|
if (!pci_set_dma_mask(pdev, DMA_64BIT_MASK)) {
|
2005-04-16 16:20:36 -06:00
|
|
|
DBG_PRINT(INIT_DBG, "s2io_init_nic: Using 64bit DMA\n");
|
|
|
|
dma_flag = TRUE;
|
|
|
|
if (pci_set_consistent_dma_mask
|
2005-06-26 16:22:14 -06:00
|
|
|
(pdev, DMA_64BIT_MASK)) {
|
2005-04-16 16:20:36 -06:00
|
|
|
DBG_PRINT(ERR_DBG,
|
|
|
|
"Unable to obtain 64bit DMA for \
|
|
|
|
consistent allocations\n");
|
|
|
|
pci_disable_device(pdev);
|
|
|
|
return -ENOMEM;
|
|
|
|
}
|
2005-06-26 16:22:14 -06:00
|
|
|
} else if (!pci_set_dma_mask(pdev, DMA_32BIT_MASK)) {
|
2005-04-16 16:20:36 -06:00
|
|
|
DBG_PRINT(INIT_DBG, "s2io_init_nic: Using 32bit DMA\n");
|
|
|
|
} else {
|
|
|
|
pci_disable_device(pdev);
|
|
|
|
return -ENOMEM;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (pci_request_regions(pdev, s2io_driver_name)) {
|
|
|
|
DBG_PRINT(ERR_DBG, "Request Regions failed\n"),
|
|
|
|
pci_disable_device(pdev);
|
|
|
|
return -ENODEV;
|
|
|
|
}
|
|
|
|
|
|
|
|
dev = alloc_etherdev(sizeof(nic_t));
|
|
|
|
if (dev == NULL) {
|
|
|
|
DBG_PRINT(ERR_DBG, "Device allocation failed\n");
|
|
|
|
pci_disable_device(pdev);
|
|
|
|
pci_release_regions(pdev);
|
|
|
|
return -ENODEV;
|
|
|
|
}
|
|
|
|
|
|
|
|
pci_set_master(pdev);
|
|
|
|
pci_set_drvdata(pdev, dev);
|
|
|
|
SET_MODULE_OWNER(dev);
|
|
|
|
SET_NETDEV_DEV(dev, &pdev->dev);
|
|
|
|
|
|
|
|
/* Private member variable initialized to s2io NIC structure */
|
|
|
|
sp = dev->priv;
|
|
|
|
memset(sp, 0, sizeof(nic_t));
|
|
|
|
sp->dev = dev;
|
|
|
|
sp->pdev = pdev;
|
|
|
|
sp->high_dma_flag = dma_flag;
|
|
|
|
sp->device_enabled_once = FALSE;
|
|
|
|
|
|
|
|
/* Initialize some PCI/PCI-X fields of the NIC. */
|
|
|
|
s2io_init_pci(sp);
|
|
|
|
|
2005-08-03 13:24:33 -06:00
|
|
|
/*
|
2005-04-16 16:20:36 -06:00
|
|
|
* Setting the device configuration parameters.
|
2005-08-03 13:24:33 -06:00
|
|
|
* Most of these parameters can be specified by the user during
|
|
|
|
* module insertion as they are module loadable parameters. If
|
|
|
|
* these parameters are not not specified during load time, they
|
2005-04-16 16:20:36 -06:00
|
|
|
* are initialized with default values.
|
|
|
|
*/
|
|
|
|
mac_control = &sp->mac_control;
|
|
|
|
config = &sp->config;
|
|
|
|
|
|
|
|
/* Tx side parameters. */
|
|
|
|
tx_fifo_len[0] = DEFAULT_FIFO_LEN; /* Default value. */
|
|
|
|
config->tx_fifo_num = tx_fifo_num;
|
|
|
|
for (i = 0; i < MAX_TX_FIFOS; i++) {
|
|
|
|
config->tx_cfg[i].fifo_len = tx_fifo_len[i];
|
|
|
|
config->tx_cfg[i].fifo_priority = i;
|
|
|
|
}
|
|
|
|
|
2005-08-03 13:24:33 -06:00
|
|
|
/* mapping the QoS priority to the configured fifos */
|
|
|
|
for (i = 0; i < MAX_TX_FIFOS; i++)
|
|
|
|
config->fifo_mapping[i] = fifo_map[config->tx_fifo_num][i];
|
|
|
|
|
2005-04-16 16:20:36 -06:00
|
|
|
config->tx_intr_type = TXD_INT_TYPE_UTILZ;
|
|
|
|
for (i = 0; i < config->tx_fifo_num; i++) {
|
|
|
|
config->tx_cfg[i].f_no_snoop =
|
|
|
|
(NO_SNOOP_TXD | NO_SNOOP_TXD_BUFFER);
|
|
|
|
if (config->tx_cfg[i].fifo_len < 65) {
|
|
|
|
config->tx_intr_type = TXD_INT_TYPE_PER_LIST;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
config->max_txds = MAX_SKB_FRAGS;
|
|
|
|
|
|
|
|
/* Rx side parameters. */
|
|
|
|
rx_ring_sz[0] = SMALL_BLK_CNT; /* Default value. */
|
|
|
|
config->rx_ring_num = rx_ring_num;
|
|
|
|
for (i = 0; i < MAX_RX_RINGS; i++) {
|
|
|
|
config->rx_cfg[i].num_rxd = rx_ring_sz[i] *
|
|
|
|
(MAX_RXDS_PER_BLOCK + 1);
|
|
|
|
config->rx_cfg[i].ring_priority = i;
|
|
|
|
}
|
|
|
|
|
|
|
|
for (i = 0; i < rx_ring_num; i++) {
|
|
|
|
config->rx_cfg[i].ring_org = RING_ORG_BUFF1;
|
|
|
|
config->rx_cfg[i].f_no_snoop =
|
|
|
|
(NO_SNOOP_RXD | NO_SNOOP_RXD_BUFFER);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Setting Mac Control parameters */
|
|
|
|
mac_control->rmac_pause_time = rmac_pause_time;
|
|
|
|
mac_control->mc_pause_threshold_q0q3 = mc_pause_threshold_q0q3;
|
|
|
|
mac_control->mc_pause_threshold_q4q7 = mc_pause_threshold_q4q7;
|
|
|
|
|
|
|
|
|
|
|
|
/* Initialize Ring buffer parameters. */
|
|
|
|
for (i = 0; i < config->rx_ring_num; i++)
|
|
|
|
atomic_set(&sp->rx_bufs_left[i], 0);
|
|
|
|
|
2005-08-03 13:29:20 -06:00
|
|
|
/* Initialize the number of ISRs currently running */
|
|
|
|
atomic_set(&sp->isr_cnt, 0);
|
|
|
|
|
2005-04-16 16:20:36 -06:00
|
|
|
/* initialize the shared memory used by the NIC and the host */
|
|
|
|
if (init_shared_mem(sp)) {
|
|
|
|
DBG_PRINT(ERR_DBG, "%s: Memory allocation failed\n",
|
|
|
|
dev->name);
|
|
|
|
ret = -ENOMEM;
|
|
|
|
goto mem_alloc_failed;
|
|
|
|
}
|
|
|
|
|
|
|
|
sp->bar0 = ioremap(pci_resource_start(pdev, 0),
|
|
|
|
pci_resource_len(pdev, 0));
|
|
|
|
if (!sp->bar0) {
|
|
|
|
DBG_PRINT(ERR_DBG, "%s: S2IO: cannot remap io mem1\n",
|
|
|
|
dev->name);
|
|
|
|
ret = -ENOMEM;
|
|
|
|
goto bar0_remap_failed;
|
|
|
|
}
|
|
|
|
|
|
|
|
sp->bar1 = ioremap(pci_resource_start(pdev, 2),
|
|
|
|
pci_resource_len(pdev, 2));
|
|
|
|
if (!sp->bar1) {
|
|
|
|
DBG_PRINT(ERR_DBG, "%s: S2IO: cannot remap io mem2\n",
|
|
|
|
dev->name);
|
|
|
|
ret = -ENOMEM;
|
|
|
|
goto bar1_remap_failed;
|
|
|
|
}
|
|
|
|
|
|
|
|
dev->irq = pdev->irq;
|
|
|
|
dev->base_addr = (unsigned long) sp->bar0;
|
|
|
|
|
|
|
|
/* Initializing the BAR1 address as the start of the FIFO pointer. */
|
|
|
|
for (j = 0; j < MAX_TX_FIFOS; j++) {
|
|
|
|
mac_control->tx_FIFO_start[j] = (TxFIFO_element_t __iomem *)
|
|
|
|
(sp->bar1 + (j * 0x00020000));
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Driver entry points */
|
|
|
|
dev->open = &s2io_open;
|
|
|
|
dev->stop = &s2io_close;
|
|
|
|
dev->hard_start_xmit = &s2io_xmit;
|
|
|
|
dev->get_stats = &s2io_get_stats;
|
|
|
|
dev->set_multicast_list = &s2io_set_multicast;
|
|
|
|
dev->do_ioctl = &s2io_ioctl;
|
|
|
|
dev->change_mtu = &s2io_change_mtu;
|
|
|
|
SET_ETHTOOL_OPS(dev, &netdev_ethtool_ops);
|
2005-08-03 13:35:55 -06:00
|
|
|
dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
|
|
|
|
dev->vlan_rx_register = s2io_vlan_rx_register;
|
|
|
|
dev->vlan_rx_kill_vid = (void *)s2io_vlan_rx_kill_vid;
|
2005-08-03 13:24:33 -06:00
|
|
|
|
2005-04-16 16:20:36 -06:00
|
|
|
/*
|
|
|
|
* will use eth_mac_addr() for dev->set_mac_address
|
|
|
|
* mac address will be set every time dev->open() is called
|
|
|
|
*/
|
2005-08-03 13:24:33 -06:00
|
|
|
#if defined(CONFIG_S2IO_NAPI)
|
2005-04-16 16:20:36 -06:00
|
|
|
dev->poll = s2io_poll;
|
2005-08-03 13:24:33 -06:00
|
|
|
dev->weight = 32;
|
2005-04-16 16:20:36 -06:00
|
|
|
#endif
|
|
|
|
|
|
|
|
dev->features |= NETIF_F_SG | NETIF_F_IP_CSUM;
|
|
|
|
if (sp->high_dma_flag == TRUE)
|
|
|
|
dev->features |= NETIF_F_HIGHDMA;
|
|
|
|
#ifdef NETIF_F_TSO
|
|
|
|
dev->features |= NETIF_F_TSO;
|
|
|
|
#endif
|
|
|
|
|
|
|
|
dev->tx_timeout = &s2io_tx_watchdog;
|
|
|
|
dev->watchdog_timeo = WATCH_DOG_TIMEOUT;
|
|
|
|
INIT_WORK(&sp->rst_timer_task,
|
|
|
|
(void (*)(void *)) s2io_restart_nic, dev);
|
|
|
|
INIT_WORK(&sp->set_link_task,
|
|
|
|
(void (*)(void *)) s2io_set_link, sp);
|
|
|
|
|
|
|
|
pci_save_state(sp->pdev);
|
|
|
|
|
|
|
|
/* Setting swapper control on the NIC, for proper reset operation */
|
|
|
|
if (s2io_set_swapper(sp)) {
|
|
|
|
DBG_PRINT(ERR_DBG, "%s:swapper settings are wrong\n",
|
|
|
|
dev->name);
|
|
|
|
ret = -EAGAIN;
|
|
|
|
goto set_swap_failed;
|
|
|
|
}
|
|
|
|
|
2005-08-03 13:24:33 -06:00
|
|
|
/*
|
|
|
|
* Fix for all "FFs" MAC address problems observed on
|
|
|
|
* Alpha platforms
|
|
|
|
*/
|
2005-04-16 16:20:36 -06:00
|
|
|
fix_mac_address(sp);
|
|
|
|
s2io_reset(sp);
|
|
|
|
|
|
|
|
/*
|
|
|
|
* MAC address initialization.
|
|
|
|
* For now only one mac address will be read and used.
|
|
|
|
*/
|
|
|
|
bar0 = sp->bar0;
|
|
|
|
val64 = RMAC_ADDR_CMD_MEM_RD | RMAC_ADDR_CMD_MEM_STROBE_NEW_CMD |
|
|
|
|
RMAC_ADDR_CMD_MEM_OFFSET(0 + MAC_MAC_ADDR_START_OFFSET);
|
|
|
|
writeq(val64, &bar0->rmac_addr_cmd_mem);
|
|
|
|
wait_for_cmd_complete(sp);
|
|
|
|
|
|
|
|
tmp64 = readq(&bar0->rmac_addr_data0_mem);
|
|
|
|
mac_down = (u32) tmp64;
|
|
|
|
mac_up = (u32) (tmp64 >> 32);
|
|
|
|
|
|
|
|
memset(sp->def_mac_addr[0].mac_addr, 0, sizeof(ETH_ALEN));
|
|
|
|
|
|
|
|
sp->def_mac_addr[0].mac_addr[3] = (u8) (mac_up);
|
|
|
|
sp->def_mac_addr[0].mac_addr[2] = (u8) (mac_up >> 8);
|
|
|
|
sp->def_mac_addr[0].mac_addr[1] = (u8) (mac_up >> 16);
|
|
|
|
sp->def_mac_addr[0].mac_addr[0] = (u8) (mac_up >> 24);
|
|
|
|
sp->def_mac_addr[0].mac_addr[5] = (u8) (mac_down >> 16);
|
|
|
|
sp->def_mac_addr[0].mac_addr[4] = (u8) (mac_down >> 24);
|
|
|
|
|
|
|
|
DBG_PRINT(INIT_DBG,
|
|
|
|
"DEFAULT MAC ADDR:0x%02x-%02x-%02x-%02x-%02x-%02x\n",
|
|
|
|
sp->def_mac_addr[0].mac_addr[0],
|
|
|
|
sp->def_mac_addr[0].mac_addr[1],
|
|
|
|
sp->def_mac_addr[0].mac_addr[2],
|
|
|
|
sp->def_mac_addr[0].mac_addr[3],
|
|
|
|
sp->def_mac_addr[0].mac_addr[4],
|
|
|
|
sp->def_mac_addr[0].mac_addr[5]);
|
|
|
|
|
|
|
|
/* Set the factory defined MAC address initially */
|
|
|
|
dev->addr_len = ETH_ALEN;
|
|
|
|
memcpy(dev->dev_addr, sp->def_mac_addr, ETH_ALEN);
|
|
|
|
|
|
|
|
/*
|
2005-08-03 13:24:33 -06:00
|
|
|
* Initialize the tasklet status and link state flags
|
2005-04-16 16:20:36 -06:00
|
|
|
* and the card statte parameter
|
|
|
|
*/
|
|
|
|
atomic_set(&(sp->card_state), 0);
|
|
|
|
sp->tasklet_status = 0;
|
|
|
|
sp->link_state = 0;
|
|
|
|
|
|
|
|
/* Initialize spinlocks */
|
|
|
|
spin_lock_init(&sp->tx_lock);
|
|
|
|
#ifndef CONFIG_S2IO_NAPI
|
|
|
|
spin_lock_init(&sp->put_lock);
|
|
|
|
#endif
|
2005-08-03 13:29:20 -06:00
|
|
|
spin_lock_init(&sp->rx_lock);
|
2005-04-16 16:20:36 -06:00
|
|
|
|
2005-08-03 13:24:33 -06:00
|
|
|
/*
|
|
|
|
* SXE-002: Configure link and activity LED to init state
|
|
|
|
* on driver load.
|
2005-04-16 16:20:36 -06:00
|
|
|
*/
|
|
|
|
subid = sp->pdev->subsystem_device;
|
|
|
|
if ((subid & 0xFF) >= 0x07) {
|
|
|
|
val64 = readq(&bar0->gpio_control);
|
|
|
|
val64 |= 0x0000800000000000ULL;
|
|
|
|
writeq(val64, &bar0->gpio_control);
|
|
|
|
val64 = 0x0411040400000000ULL;
|
|
|
|
writeq(val64, (void __iomem *) bar0 + 0x2700);
|
|
|
|
val64 = readq(&bar0->gpio_control);
|
|
|
|
}
|
|
|
|
|
|
|
|
sp->rx_csum = 1; /* Rx chksum verify enabled by default */
|
|
|
|
|
|
|
|
if (register_netdev(dev)) {
|
|
|
|
DBG_PRINT(ERR_DBG, "Device registration failed\n");
|
|
|
|
ret = -ENODEV;
|
|
|
|
goto register_failed;
|
|
|
|
}
|
|
|
|
|
2005-08-03 13:29:20 -06:00
|
|
|
/* Initialize device name */
|
|
|
|
strcpy(sp->name, dev->name);
|
|
|
|
strcat(sp->name, ": Neterion Xframe I 10GbE adapter");
|
|
|
|
|
2005-08-03 13:24:33 -06:00
|
|
|
/*
|
|
|
|
* Make Link state as off at this point, when the Link change
|
|
|
|
* interrupt comes the state will be automatically changed to
|
2005-04-16 16:20:36 -06:00
|
|
|
* the right state.
|
|
|
|
*/
|
|
|
|
netif_carrier_off(dev);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
register_failed:
|
|
|
|
set_swap_failed:
|
|
|
|
iounmap(sp->bar1);
|
|
|
|
bar1_remap_failed:
|
|
|
|
iounmap(sp->bar0);
|
|
|
|
bar0_remap_failed:
|
|
|
|
mem_alloc_failed:
|
|
|
|
free_shared_mem(sp);
|
|
|
|
pci_disable_device(pdev);
|
|
|
|
pci_release_regions(pdev);
|
|
|
|
pci_set_drvdata(pdev, NULL);
|
|
|
|
free_netdev(dev);
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
2005-08-03 13:24:33 -06:00
|
|
|
* s2io_rem_nic - Free the PCI device
|
2005-04-16 16:20:36 -06:00
|
|
|
* @pdev: structure containing the PCI related information of the device.
|
2005-08-03 13:24:33 -06:00
|
|
|
* Description: This function is called by the Pci subsystem to release a
|
2005-04-16 16:20:36 -06:00
|
|
|
* PCI device and free up all resource held up by the device. This could
|
2005-08-03 13:24:33 -06:00
|
|
|
* be in response to a Hot plug event or when the driver is to be removed
|
2005-04-16 16:20:36 -06:00
|
|
|
* from memory.
|
|
|
|
*/
|
|
|
|
|
|
|
|
static void __devexit s2io_rem_nic(struct pci_dev *pdev)
|
|
|
|
{
|
|
|
|
struct net_device *dev =
|
|
|
|
(struct net_device *) pci_get_drvdata(pdev);
|
|
|
|
nic_t *sp;
|
|
|
|
|
|
|
|
if (dev == NULL) {
|
|
|
|
DBG_PRINT(ERR_DBG, "Driver Data is NULL!!\n");
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
sp = dev->priv;
|
|
|
|
unregister_netdev(dev);
|
|
|
|
|
|
|
|
free_shared_mem(sp);
|
|
|
|
iounmap(sp->bar0);
|
|
|
|
iounmap(sp->bar1);
|
|
|
|
pci_disable_device(pdev);
|
|
|
|
pci_release_regions(pdev);
|
|
|
|
pci_set_drvdata(pdev, NULL);
|
|
|
|
free_netdev(dev);
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* s2io_starter - Entry point for the driver
|
|
|
|
* Description: This function is the entry point for the driver. It verifies
|
|
|
|
* the module loadable parameters and initializes PCI configuration space.
|
|
|
|
*/
|
|
|
|
|
|
|
|
int __init s2io_starter(void)
|
|
|
|
{
|
|
|
|
return pci_module_init(&s2io_driver);
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
2005-08-03 13:24:33 -06:00
|
|
|
* s2io_closer - Cleanup routine for the driver
|
2005-04-16 16:20:36 -06:00
|
|
|
* Description: This function is the cleanup routine for the driver. It unregist * ers the driver.
|
|
|
|
*/
|
|
|
|
|
2005-08-03 13:24:33 -06:00
|
|
|
void s2io_closer(void)
|
2005-04-16 16:20:36 -06:00
|
|
|
{
|
|
|
|
pci_unregister_driver(&s2io_driver);
|
|
|
|
DBG_PRINT(INIT_DBG, "cleanup done\n");
|
|
|
|
}
|
|
|
|
|
|
|
|
module_init(s2io_starter);
|
|
|
|
module_exit(s2io_closer);
|