sample configs from upstream

master
jebba 1 year ago
parent d5a9156e0b
commit a0c39ab1ac
  1. 145
      dist/default.conf
  2. 202
      dist/front-end-cal.conf
  3. 67
      dist/gnss-sdr-kalman-bayes.conf
  4. 145
      dist/gnss-sdr.conf
  5. 127
      dist/gnss-sdr_BDS_B1I_byte.conf
  6. 212
      dist/gnss-sdr_BDS_B3I_GPS_L1_CA_ibyte.conf
  7. 123
      dist/gnss-sdr_BDS_B3I_byte.conf
  8. 132
      dist/gnss-sdr_BDS_B3I_ibyte.conf
  9. 81
      dist/gnss-sdr_BDS_B3I_short.conf
  10. 142
      dist/gnss-sdr_GLONASS_L1_CA_GPS_L1_CA_ibyte.conf
  11. 143
      dist/gnss-sdr_GLONASS_L1_CA_GPS_L2C_ibyte.conf
  12. 82
      dist/gnss-sdr_GLONASS_L1_CA_ibyte.conf
  13. 86
      dist/gnss-sdr_GLONASS_L1_CA_ibyte_coh_trk.conf
  14. 101
      dist/gnss-sdr_GLONASS_L1_ibyte.conf
  15. 143
      dist/gnss-sdr_GLONASS_L2_CA_GPS_L1_CA_ibyte.conf
  16. 144
      dist/gnss-sdr_GLONASS_L2_CA_GPS_L2C_ibyte.conf
  17. 76
      dist/gnss-sdr_GLONASS_L2_CA_ibyte.conf
  18. 86
      dist/gnss-sdr_GLONASS_L2_CA_ibyte_coh_trk.conf
  19. 116
      dist/gnss-sdr_GPS_L1_2ch_fmcomms2_realtime.conf
  20. 103
      dist/gnss-sdr_GPS_L1_2ch_udp.conf
  21. 94
      dist/gnss-sdr_GPS_L1_CA_ibyte.conf
  22. 86
      dist/gnss-sdr_GPS_L1_FPGA.conf
  23. 115
      dist/gnss-sdr_GPS_L1_GN3S_realtime.conf
  24. 111
      dist/gnss-sdr_GPS_L1_LimeSDR.conf
  25. 137
      dist/gnss-sdr_GPS_L1_SPIR.conf
  26. 158
      dist/gnss-sdr_GPS_L1_USRP_X300_realtime.conf
  27. 119
      dist/gnss-sdr_GPS_L1_USRP_realtime.conf
  28. 108
      dist/gnss-sdr_GPS_L1_acq_QuickSync.conf
  29. 110
      dist/gnss-sdr_GPS_L1_bladeRF.conf
  30. 135
      dist/gnss-sdr_GPS_L1_fmcomms2_realtime.conf
  31. 98
      dist/gnss-sdr_GPS_L1_gr_complex.conf
  32. 85
      dist/gnss-sdr_GPS_L1_gr_complex_gpu.conf
  33. 95
      dist/gnss-sdr_GPS_L1_ishort.conf
  34. 89
      dist/gnss-sdr_GPS_L1_monitor.conf
  35. 164
      dist/gnss-sdr_GPS_L1_nsr.conf
  36. 207
      dist/gnss-sdr_GPS_L1_nsr_kf.conf
  37. 154
      dist/gnss-sdr_GPS_L1_nsr_twobit_packed.conf
  38. 104
      dist/gnss-sdr_GPS_L1_plutosdr_realtime.conf
  39. 111
      dist/gnss-sdr_GPS_L1_pulse_blanking_gr_complex.conf
  40. 151
      dist/gnss-sdr_GPS_L1_rtl_tcp_realtime.conf
  41. 154
      dist/gnss-sdr_GPS_L1_rtlsdr_realtime.conf
  42. 138
      dist/gnss-sdr_GPS_L1_two_bits_cpx.conf
  43. 82
      dist/gnss-sdr_GPS_L1_udp_with_monitor.conf
  44. 157
      dist/gnss-sdr_GPS_L2C_USRP1_realtime.conf
  45. 163
      dist/gnss-sdr_GPS_L2C_USRP_X300_realtime.conf
  46. 94
      dist/gnss-sdr_Galileo_E1_USRP_X300_realtime.conf
  47. 100
      dist/gnss-sdr_Galileo_E1_acq_QuickSync.conf
  48. 109
      dist/gnss-sdr_Galileo_E1_ishort.conf
  49. 127
      dist/gnss-sdr_Galileo_E1_nsr.conf
  50. 121
      dist/gnss-sdr_Galileo_E5a.conf
  51. 157
      dist/gnss-sdr_Galileo_E5a_IFEN_CTTC.conf
  52. 160
      dist/gnss-sdr_Hybrid_byte.conf
  53. 145
      dist/gnss-sdr_Hybrid_byte_sim.conf
  54. 131
      dist/gnss-sdr_Hybrid_gr_complex.conf
  55. 161
      dist/gnss-sdr_Hybrid_ishort.conf
  56. 176
      dist/gnss-sdr_Hybrid_nsr.conf
  57. 141
      dist/gnss-sdr_galileo_E1_extended_correlator_byte.conf
  58. 169
      dist/gnss-sdr_galileo_E1_extended_correlator_labsat.conf
  59. 184
      dist/gnss-sdr_multichannel_GPS_L1_Flexiband_bin_file_III_1a.conf
  60. 189
      dist/gnss-sdr_multichannel_GPS_L1_Flexiband_realtime_III_1a.conf
  61. 188
      dist/gnss-sdr_multichannel_GPS_L1_Flexiband_realtime_III_1b.conf
  62. 195
      dist/gnss-sdr_multichannel_GPS_L1_Flexiband_realtime_II_3b.conf
  63. 183
      dist/gnss-sdr_multichannel_GPS_L1_Flexiband_realtime_I_1b.conf
  64. 305
      dist/gnss-sdr_multichannel_GPS_L1_L2_Flexiband_realtime_III_1b.conf
  65. 278
      dist/gnss-sdr_multichannel_GPS_L1_L2_Galileo_E1B_Flexiband_bin_file_III_1b.conf
  66. 161
      dist/gnss-sdr_multichannel_GPS_L1_USRP_X300_realtime.conf
  67. 363
      dist/gnss-sdr_multichannel_GPS_L2_M_Flexiband_bin_file_III_1b.conf
  68. 258
      dist/gnss-sdr_multichannel_GPS_L2_M_Flexiband_bin_file_III_1b_real.conf
  69. 385
      dist/gnss-sdr_multichannel_all_in_one_Flexiband_bin_file_III_1b.conf
  70. 169
      dist/gnss-sdr_multisource_Hybrid_ishort.conf
  71. 231
      dist/gnss-sdr_multisource_Hybrid_nsr.conf

145
dist/default.conf vendored

@ -0,0 +1,145 @@
; This is a GNSS-SDR configuration file
; The configuration API is described at https://gnss-sdr.org/docs/sp-blocks/
; SPDX-License-Identifier: GPL-3.0-or-later
; SPDX-FileCopyrightText: (C) 2010-2020 (see AUTHORS file for a list of contributors)
; Default configuration file
; You can define your own receiver and invoke it by doing
; gnss-sdr --config_file=my_GNSS_SDR_configuration.conf
;
[GNSS-SDR]
;######### GLOBAL OPTIONS ##################
;internal_fs_sps: Internal signal sampling frequency after the signal conditioning stage [samples per second].
GNSS-SDR.internal_fs_sps=4000000
;######### SUPL RRLP GPS assistance configuration #####
; Check https://www.mcc-mnc.com/
; On Android: https://play.google.com/store/apps/details?id=net.its_here.cellidinfo&hl=en
GNSS-SDR.SUPL_gps_enabled=false
GNSS-SDR.SUPL_read_gps_assistance_xml=true
GNSS-SDR.SUPL_gps_ephemeris_server=supl.google.com
GNSS-SDR.SUPL_gps_ephemeris_port=7275
GNSS-SDR.SUPL_gps_acquisition_server=supl.google.com
GNSS-SDR.SUPL_gps_acquisition_port=7275
GNSS-SDR.SUPL_MCC=244
GNSS-SDR.SUPL_MNC=5
GNSS-SDR.SUPL_LAC=0x59e2
GNSS-SDR.SUPL_CI=0x31b0
;######### SIGNAL_SOURCE CONFIG ############
SignalSource.implementation=File_Signal_Source
SignalSource.filename=/datalogger/signals/CTTC/2013_04_04_GNSS_SIGNAL_at_CTTC_SPAIN/2013_04_04_GNSS_SIGNAL_at_CTTC_SPAIN.dat ; <- PUT YOUR FILE HERE
SignalSource.item_type=ishort
SignalSource.sampling_frequency=4000000
SignalSource.samples=0
SignalSource.repeat=false
SignalSource.enable_throttle_control=false
;######### SIGNAL_CONDITIONER CONFIG ############
SignalConditioner.implementation=Signal_Conditioner
;######### DATA_TYPE_ADAPTER CONFIG ############
DataTypeAdapter.implementation=Ishort_To_Complex
;######### INPUT_FILTER CONFIG ############
InputFilter.implementation=Pass_Through ; or Fir_Filter
InputFilter.input_item_type=gr_complex
InputFilter.output_item_type=gr_complex
InputFilter.taps_item_type=float
InputFilter.number_of_taps=5
InputFilter.number_of_bands=2
InputFilter.band1_begin=0.0
InputFilter.band1_end=0.44
InputFilter.band2_begin=0.55
InputFilter.band2_end=1.0
InputFilter.ampl1_begin=1.0
InputFilter.ampl1_end=1.0
InputFilter.ampl2_begin=0.0
InputFilter.ampl2_end=0.0
InputFilter.band1_error=1.0
InputFilter.band2_error=1.0
InputFilter.filter_type=bandpass
InputFilter.grid_density=16
InputFilter.sampling_frequency=4000000
InputFilter.IF=0
InputFilter.dump=false
InputFilter.dump_filename=../data/input_filter.dat
;######### RESAMPLER CONFIG ############
Resampler.implementation=Pass_Through
Resampler.dump=false
Resampler.dump_filename=../data/resampler.dat
;######### CHANNELS GLOBAL CONFIG ############
Channels_1C.count=6
Channels_1B.count=0
Channels.in_acquisition=1
;######### SPECIFIC CHANNELS CONFIG ######
;######### CHANNEL 0 CONFIG ############
;Channel0.signal=1C
;Channel0.satellite=11
;######### CHANNEL 1 CONFIG ############
;Channel1.signal=1C
;Channel1.satellite=18
;######### ACQUISITION GLOBAL CONFIG ############
Acquisition_1C.implementation=GPS_L1_CA_PCPS_Acquisition_Fine_Doppler
Acquisition_1C.item_type=gr_complex
Acquisition_1C.coherent_integration_time_ms=1
Acquisition_1C.threshold=2.5
;Acquisition_1C.pfa=0.0001
Acquisition_1C.doppler_max=10000
Acquisition_1C.doppler_step=500
Acquisition_1C.max_dwells=5
Acquisition_1C.dump=false
Acquisition_1C.dump_filename=./acq_dump.dat
;######### TRACKING GLOBAL CONFIG ############
Tracking_1C.implementation=GPS_L1_CA_DLL_PLL_Tracking
Tracking_1C.item_type=gr_complex
Tracking_1C.pll_bw_hz=45.0;
Tracking_1C.dll_bw_hz=3.0;
Tracking_1C.order=3;
Tracking_1C.dump=false
Tracking_1C.dump_filename=../data/epl_tracking_ch_
;######### TELEMETRY DECODER GPS CONFIG ############
TelemetryDecoder_1C.implementation=GPS_L1_CA_Telemetry_Decoder
TelemetryDecoder_1C.dump=false
;######### OBSERVABLES CONFIG ############
Observables.implementation=Hybrid_Observables
Observables.dump=false
Observables.dump_filename=./observables.dat
;######### PVT CONFIG ############
PVT.implementation=RTKLIB_PVT
PVT.positioning_mode=PPP_Static ; options: Single, Static, Kinematic, PPP_Static, PPP_Kinematic
PVT.iono_model=Broadcast ; options: OFF, Broadcast, SBAS, Iono-Free-LC, Estimate_STEC, IONEX
PVT.trop_model=Saastamoinen ; options: OFF, Saastamoinen, SBAS, Estimate_ZTD, Estimate_ZTD_Grad
PVT.AR_GPS=PPP-AR ; options: OFF, Continuous, Instantaneous, Fix-and-Hold, PPP-AR
PVT.output_rate_ms=10
PVT.display_rate_ms=500
PVT.nmea_dump_filename=./gnss_sdr_pvt.nmea
PVT.flag_nmea_tty_port=true
PVT.nmea_dump_devname=/dev/pts/4
PVT.flag_rtcm_server=true
PVT.flag_rtcm_tty_port=false
PVT.rtcm_dump_devname=/dev/pts/1
PVT.dump=false
PVT.dump_filename=./PVT

@ -0,0 +1,202 @@
; This is a GNSS-SDR configuration file
; The configuration API is described at https://gnss-sdr.org/docs/sp-blocks/
; SPDX-License-Identifier: GPL-3.0-or-later
; SPDX-FileCopyrightText: (C) 2010-2020 (see AUTHORS file for a list of contributors)
; Default configuration file
; You can define your own front-end calibration tool configuration and invoke it by doing
; ./front-end-cal --config_file=my_GNSS_SDR_configuration.conf
;
[GNSS-SDR]
;######### INITIAL RECEIVER POSITIION ######
; san francisco scenario
;GNSS-SDR.init_latitude_deg=40.74846557442795
;GNSS-SDR.init_longitude_deg=-73.98593961814200
;GNSS-SDR.init_altitude_m=329.11968943169342
; Barcelona CTTC
GNSS-SDR.init_latitude_deg=41.27719585553101
GNSS-SDR.init_longitude_deg=1.988782985790802
GNSS-SDR.init_altitude_m=10
; Mozoncillo
;GNSS-SDR.init_latitude_deg=41.14534824586196
;GNSS-SDR.init_longitude_deg=-4.187125019737464
;GNSS-SDR.init_altitude_m=900
;######### GLOBAL OPTIONS ##################
;internal_fs_sps: Internal signal sampling frequency after the signal conditioning stage [samples per second].
GNSS-SDR.internal_fs_sps=2000000
;######### SUPL RRLP GPS assistance configuration #####
; Check https://www.mcc-mnc.com/
; On Android: https://play.google.com/store/apps/details?id=net.its_here.cellidinfo&hl=en
GNSS-SDR.SUPL_gps_enabled=true
GNSS-SDR.SUPL_read_gps_assistance_xml=false
GNSS-SDR.SUPL_gps_ephemeris_server=supl.google.com
GNSS-SDR.SUPL_gps_ephemeris_port=7275
GNSS-SDR.SUPL_gps_acquisition_server=supl.google.com
GNSS-SDR.SUPL_gps_acquisition_port=7275
GNSS-SDR.SUPL_MCC=217
GNSS-SDR.SUPL_MNC=7
GNSS-SDR.SUPL_LAC=861
GNSS-SDR.SUPL_CI=40184
;######### SIGNAL_SOURCE CONFIG ############
SignalSource.implementation=Osmosdr_Signal_Source
;#freq: RF front-end center frequency in [Hz]
SignalSource.freq=1575420000
;#item_type: Type and resolution for each of the signal samples. Use only gr_complex in this version.
SignalSource.item_type=gr_complex
;#sampling_frequency: Original Signal sampling frequency in samples per second
SignalSource.sampling_frequency=2000000
;#gain: Front-end Gain in [dB]
SignalSource.gain=40
SignalSource.rf_gain=40
SignalSource.if_gain=30
SignalSource.AGC_enabled=false
;# Please note that the new RTL-SDR Blog V3 dongles ship a < 1 PPM
;# temperature compensated oscillator (TCXO), which is well suited for GNSS
;# signal processing, and a 4.5 V powered bias-tee to feed an active antenna.
;# Whether the bias-tee is turned off before reception depends on which version
;# of gr-osmosdr was used when compiling GNSS-SDR. With an old version
;# (for example, v0.1.4-8), the utility rtl_biast may be used to switch the
;# bias-tee, and then call gnss-sdr.
;# See https://github.com/rtlsdrblog/rtl_biast
;# After reception the bias-tee is switched off automatically by the program.
;# With newer versions of gr-osmosdr (>= 0.1.4-13), the bias-tee can be
;# activated by uncommenting the following line:
;SignalSource.osmosdr_args=rtl,bias=1
;#samples: Number of samples to be processed. Notice that 0 means infinite samples.
SignalSource.samples=0
;#repeat: Repeat the processing file.
SignalSource.repeat=false
;#dump: Dump the Signal source data to a file.
SignalSource.dump=false
SignalSource.dump_filename=../data/signal_source.dat
;######### SIGNAL_CONDITIONER CONFIG ############
;## It holds blocks to change data type, filter and resample input data.
;#implementation: Use [Pass_Through] or [Signal_Conditioner]
;#[Pass_Through] disables this block and the [DataTypeAdapter], [InputFilter] and [Resampler] blocks
;#[Signal_Conditioner] enables this block. Then you have to configure [DataTypeAdapter], [InputFilter] and [Resampler] blocks
SignalConditioner.implementation=Pass_Through
;######### DATA_TYPE_ADAPTER CONFIG ############
;## Changes the type of input data.
;#implementation: Use [Ishort_To_Complex] or [Pass_Through]
DataTypeAdapter.implementation=Pass_Through
;#dump: Dump the filtered data to a file.
DataTypeAdapter.dump=false
;#dump_filename: Log path and filename.
DataTypeAdapter.dump_filename=../data/data_type_adapter.dat
;######### INPUT_FILTER CONFIG ############
;## Filter the input data. Can be combined with frequency translation for IF signals
;#implementation: Use [Pass_Through] or [Fir_Filter] or [Freq_Xlating_Fir_Filter]
;#[Pass_Through] disables this block
;#[Fir_Filter] enables a FIR Filter
;#[Freq_Xlating_Fir_Filter] enables FIR filter and a composite frequency translation that shifts IF down to zero Hz.
InputFilter.implementation=Freq_Xlating_Fir_Filter
;#The following options are used in the filter design of Fir_Filter and Freq_Xlating_Fir_Filter implementation.
;#These options are based on parameters of gnuradio's function: gr_remez.
;#This function calculates the optimal (in the Chebyshev/minimax sense) FIR filter impulse response given a set of band edges,
;#the desired response on those bands, and the weight given to the error in those bands.
;#input_item_type: Type and resolution for input signal samples.
InputFilter.input_item_type=gr_complex
;#outut_item_type: Type and resolution for output filtered signal samples.
InputFilter.output_item_type=gr_complex
;#taps_item_type: Type and resolution for the taps of the filter. Use only float in this version.
InputFilter.taps_item_type=float
;#number_of_taps: Number of taps in the filter. Increasing this parameter increases the processing time
InputFilter.number_of_taps=5
;#number_of _bands: Number of frequency bands in the filter.
InputFilter.number_of_bands=2
;#bands: frequency at the band edges [ b1 e1 b2 e2 b3 e3 ...].
;#Frequency is in the range [0, 1], with 1 being the Nyquist frequency (Fs/2)
;#The number of band_begin and band_end elements must match the number of bands
InputFilter.band1_begin=0.0
;InputFilter.band1_end=0.8
InputFilter.band1_end=0.85
InputFilter.band2_begin=0.90
InputFilter.band2_end=1.0
;#ampl: desired amplitude at the band edges [ a(b1) a(e1) a(b2) a(e2) ...].
;#The number of ampl_begin and ampl_end elements must match the number of bands
InputFilter.ampl1_begin=1.0
InputFilter.ampl1_end=1.0
InputFilter.ampl2_begin=0.0
InputFilter.ampl2_end=0.0
;#band_error: weighting applied to each band (usually 1).
;#The number of band_error elements must match the number of bands
InputFilter.band1_error=1.0
InputFilter.band2_error=1.0
;#filter_type: one of "bandpass", "hilbert" or "differentiator"
InputFilter.filter_type=bandpass
;#grid_density: determines how accurately the filter will be constructed.
;The minimum value is 16; higher values are slower to compute the filter.
InputFilter.grid_density=16
;#The following options are used only in Freq_Xlating_Fir_Filter implementation.
;#InputFilter.IF is the intermediate frequency (in Hz) shifted down to zero Hz
InputFilter.sampling_frequency=2000000
InputFilter.IF=0
InputFilter.decimation_factor=1
;#dump: Dump the filtered data to a file.
InputFilter.dump=false
;#dump_filename: Log path and filename.
InputFilter.dump_filename=../data/input_filter.dat
;######### RESAMPLER CONFIG ############
;## Resamples the input data.
;#implementation: Use [Pass_Through] or [Direct_Resampler]
;#[Pass_Through] disables this block
Resampler.implementation=Pass_Through
;######### ACQUISITION GLOBAL CONFIG ############
Acquisition_1C.implementation=GPS_L1_CA_PCPS_Acquisition_Fine_Doppler
;#item_type: Type and resolution for each of the signal samples. Use only gr_complex in this version.
Acquisition.item_type=gr_complex
;#sampled_ms: Signal block duration for the acquisition signal detection [ms]
Acquisition.sampled_ms=1
;#threshold: Acquisition threshold
Acquisition.threshold=0.015
;#doppler_max: Maximum expected Doppler shift [Hz]
Acquisition.doppler_max=100000
;#doppler_max: Maximum expected Doppler shift [Hz]
Acquisition.doppler_min=-100000
;#doppler_step Doppler step in the grid search [Hz]
Acquisition.doppler_step=500
;#maximum dwells
Acquisition.max_dwells=15
;#dump: Enable or disable the acquisition internal data file logging [true] or [false]
Acquisition.dump=false
;#filename: Log path and filename
Acquisition.dump_filename=./acq_dump.dat

@ -0,0 +1,67 @@
; This is a GNSS-SDR configuration file
; The configuration API is described at https://gnss-sdr.org/docs/sp-blocks/
; SPDX-License-Identifier: GPL-3.0-or-later
; SPDX-FileCopyrightText: (C) 2010-2020 (see AUTHORS file for a list of contributors)
[GNSS-SDR]
;######### GLOBAL OPTIONS ##################
;internal_fs_sps: Internal signal sampling frequency after the signal conditioning stage [samples per second].
GNSS-SDR.internal_fs_sps=2000000
GNSS-SDR.internal_fs_hz=2000000
;######### SIGNAL_SOURCE CONFIG ############
SignalSource.implementation=File_Signal_Source
SignalSource.filename=/home/glamountain/gnss-sdr/data/2013_04_04_GNSS_SIGNAL_at_CTTC_SPAIN/2013_04_04_GNSS_SIGNAL_at_CTTC_SPAIN.dat
SignalSource.item_type=ishort
SignalSource.sampling_frequency=4000000
SignalSource.freq=1575420000
SignalSource.samples=0
;######### SIGNAL_CONDITIONER CONFIG ############
SignalConditioner.implementation=Signal_Conditioner
DataTypeAdapter.implementation=Ishort_To_Complex
InputFilter.implementation=Pass_Through
InputFilter.item_type=gr_complex
Resampler.implementation=Direct_Resampler
Resampler.sample_freq_in=4000000
Resampler.sample_freq_out=2000000
Resampler.item_type=gr_complex
;######### CHANNELS GLOBAL CONFIG ############
Channels_1C.count=8
Channels.in_acquisition=1
Channel.signal=1C
;######### ACQUISITION GLOBAL CONFIG ############
Acquisition_1C.implementation=GPS_L1_CA_PCPS_Acquisition
Acquisition_1C.item_type=gr_complex
Acquisition_1C.pfa=0.01
Acquisition_1C.doppler_max=10000
Acquisition_1C.doppler_step=250
Acquisition_1C.dump=false
Acquisition_1C.dump_filename=../data/kalman/acq_dump
;######### TRACKING GLOBAL CONFIG ############
Tracking_1C.implementation=GPS_L1_CA_KF_Tracking
Tracking_1C.item_type=gr_complex
Tracking_1C.pll_bw_hz=40.0;
Tracking_1C.dll_bw_hz=4.0;
Tracking_1C.order=3;
Tracking_1C.dump=true
Tracking_1C.dump_filename=../data/kalman/epl_tracking_ch_
Tracking_1C.bce_run = true;
Tracking_1C.p_transient = 0;
Tracking_1C.s_transient = 100;
;######### TELEMETRY DECODER GPS CONFIG ############
TelemetryDecoder_1C.implementation=GPS_L1_CA_Telemetry_Decoder
;######### OBSERVABLES CONFIG ############
Observables.implementation=GPS_L1_CA_Observables
;######### PVT CONFIG ############
PVT.implementation=GPS_L1_CA_PVT
PVT.averaging_depth=100
PVT.flag_averaging=true
PVT.output_rate_ms=10
PVT.display_rate_ms=500

145
dist/gnss-sdr.conf vendored

@ -0,0 +1,145 @@
; This is a GNSS-SDR configuration file
; The configuration API is described at https://gnss-sdr.org/docs/sp-blocks/
; SPDX-License-Identifier: GPL-3.0-or-later
; SPDX-FileCopyrightText: (C) 2010-2020 (see AUTHORS file for a list of contributors)
; Default configuration file
; You can define your own receiver and invoke it by doing
; gnss-sdr --config_file=my_GNSS_SDR_configuration.conf
;
[GNSS-SDR]
;######### GLOBAL OPTIONS ##################
;internal_fs_sps: Internal signal sampling frequency after the signal conditioning stage [samples per second].
GNSS-SDR.internal_fs_sps=4000000
;######### SUPL RRLP GPS assistance configuration #####
; Check https://www.mcc-mnc.com/
; On Android: https://play.google.com/store/apps/details?id=net.its_here.cellidinfo&hl=en
GNSS-SDR.SUPL_gps_enabled=false
GNSS-SDR.SUPL_read_gps_assistance_xml=true
GNSS-SDR.SUPL_gps_ephemeris_server=supl.google.com
GNSS-SDR.SUPL_gps_ephemeris_port=7275
GNSS-SDR.SUPL_gps_acquisition_server=supl.google.com
GNSS-SDR.SUPL_gps_acquisition_port=7275
GNSS-SDR.SUPL_MCC=244
GNSS-SDR.SUPL_MNC=5
GNSS-SDR.SUPL_LAC=0x59e2
GNSS-SDR.SUPL_CI=0x31b0
;######### SIGNAL_SOURCE CONFIG ############
SignalSource.implementation=File_Signal_Source
SignalSource.filename=/datalogger/signals/CTTC/2013_04_04_GNSS_SIGNAL_at_CTTC_SPAIN/2013_04_04_GNSS_SIGNAL_at_CTTC_SPAIN.dat ; <- PUT YOUR FILE HERE
SignalSource.item_type=ishort
SignalSource.sampling_frequency=4000000
SignalSource.samples=0
SignalSource.repeat=false
SignalSource.enable_throttle_control=false
;######### SIGNAL_CONDITIONER CONFIG ############
SignalConditioner.implementation=Signal_Conditioner
;######### DATA_TYPE_ADAPTER CONFIG ############
DataTypeAdapter.implementation=Ishort_To_Complex
;######### INPUT_FILTER CONFIG ############
InputFilter.implementation=Pass_Through ; or Fir_Filter
InputFilter.input_item_type=gr_complex
InputFilter.output_item_type=gr_complex
InputFilter.taps_item_type=float
InputFilter.number_of_taps=5
InputFilter.number_of_bands=2
InputFilter.band1_begin=0.0
InputFilter.band1_end=0.44
InputFilter.band2_begin=0.55
InputFilter.band2_end=1.0
InputFilter.ampl1_begin=1.0
InputFilter.ampl1_end=1.0
InputFilter.ampl2_begin=0.0
InputFilter.ampl2_end=0.0
InputFilter.band1_error=1.0
InputFilter.band2_error=1.0
InputFilter.filter_type=bandpass
InputFilter.grid_density=16
InputFilter.sampling_frequency=4000000
InputFilter.IF=0
InputFilter.dump=false
InputFilter.dump_filename=../data/input_filter.dat
;######### RESAMPLER CONFIG ############
Resampler.implementation=Pass_Through
Resampler.dump=false
Resampler.dump_filename=../data/resampler.dat
;######### CHANNELS GLOBAL CONFIG ############
Channels_1C.count=6
Channels_1B.count=0
Channels.in_acquisition=1
;######### SPECIFIC CHANNELS CONFIG ######
;######### CHANNEL 0 CONFIG ############
;Channel0.signal=1C
;Channel0.satellite=11
;######### CHANNEL 1 CONFIG ############
;Channel1.signal=1C
;Channel1.satellite=18
;######### ACQUISITION GLOBAL CONFIG ############
Acquisition_1C.implementation=GPS_L1_CA_PCPS_Acquisition_Fine_Doppler
Acquisition_1C.item_type=gr_complex
Acquisition_1C.coherent_integration_time_ms=1
Acquisition_1C.threshold=2.5
;Acquisition_1C.pfa=0.0001
Acquisition_1C.doppler_max=10000
Acquisition_1C.doppler_step=500
Acquisition_1C.max_dwells=5
Acquisition_1C.dump=false
Acquisition_1C.dump_filename=./acq_dump.dat
;######### TRACKING GLOBAL CONFIG ############
Tracking_1C.implementation=GPS_L1_CA_DLL_PLL_Tracking
Tracking_1C.item_type=gr_complex
Tracking_1C.pll_bw_hz=45.0;
Tracking_1C.dll_bw_hz=3.0;
Tracking_1C.order=3;
Tracking_1C.dump=false
Tracking_1C.dump_filename=../data/epl_tracking_ch_
;######### TELEMETRY DECODER GPS CONFIG ############
TelemetryDecoder_1C.implementation=GPS_L1_CA_Telemetry_Decoder
TelemetryDecoder_1C.dump=false
;######### OBSERVABLES CONFIG ############
Observables.implementation=Hybrid_Observables
Observables.dump=false
Observables.dump_filename=./observables.dat
;######### PVT CONFIG ############
PVT.implementation=RTKLIB_PVT
PVT.positioning_mode=PPP_Static ; options: Single, Static, Kinematic, PPP_Static, PPP_Kinematic
PVT.iono_model=Broadcast ; options: OFF, Broadcast, SBAS, Iono-Free-LC, Estimate_STEC, IONEX
PVT.trop_model=Saastamoinen ; options: OFF, Saastamoinen, SBAS, Estimate_ZTD, Estimate_ZTD_Grad
PVT.AR_GPS=PPP-AR ; options: OFF, Continuous, Instantaneous, Fix-and-Hold, PPP-AR
PVT.output_rate_ms=10
PVT.display_rate_ms=500
PVT.nmea_dump_filename=./gnss_sdr_pvt.nmea
PVT.flag_nmea_tty_port=true
PVT.nmea_dump_devname=/dev/pts/4
PVT.flag_rtcm_server=true
PVT.flag_rtcm_tty_port=false
PVT.rtcm_dump_devname=/dev/pts/1
PVT.dump=false
PVT.dump_filename=./PVT

@ -0,0 +1,127 @@
; This is a GNSS-SDR configuration file
; The configuration API is described at https://gnss-sdr.org/docs/sp-blocks/
; SPDX-License-Identifier: GPL-3.0-or-later
; SPDX-FileCopyrightText: (C) 2010-2020 (see AUTHORS file for a list of contributors)
; You can define your own receiver and invoke it by doing
; gnss-sdr --config_file=my_GNSS_SDR_configuration.conf
;
[GNSS-SDR]
;######### GLOBAL OPTIONS ##################
;internal_fs_sps: Internal signal sampling frequency after the signal conditioning stage [samples per second].
GNSS-SDR.internal_fs_sps=25000000
;######### CONTROL_THREAD CONFIG ############
ControlThread.wait_for_flowgraph=false
;######### SIGNAL_SOURCE CONFIG ############
SignalSource.implementation=File_Signal_Source
SignalSource.filename=/archive/BDS3_datasets/BdsB1IStr01.dat
SignalSource.item_type=byte
SignalSource.sampling_frequency=25000000
SignalSource.samples=0
SignalSource.repeat=false
SignalSource.dump=false
SignalSource.enable_throttle_control=false
;######### SIGNAL_CONDITIONER CONFIG ############
SignalConditioner.implementation=Signal_Conditioner
DataTypeAdapter.implementation=Byte_To_Short
InputFilter.implementation=Freq_Xlating_Fir_Filter
InputFilter.input_item_type=short
InputFilter.output_item_type=gr_complex
InputFilter.taps_item_type=float
InputFilter.number_of_taps=5
InputFilter.number_of_bands=2
InputFilter.band1_begin=0.0
InputFilter.band1_end=0.70
InputFilter.band2_begin=0.80
InputFilter.band2_end=1.0
InputFilter.ampl1_begin=1.0
InputFilter.ampl1_end=1.0
InputFilter.ampl2_begin=0.0
InputFilter.ampl2_end=0.0
InputFilter.band1_error=1.0
InputFilter.band2_error=1.0
InputFilter.filter_type=bandpass
InputFilter.grid_density=16
InputFilter.sampling_frequency=25000000
InputFilter.IF=6250000
InputFilter.dump = false
InputFilter.dump_filename=/home/dmiralles/Documents/gnss-sdr/src/tests/signal_samples/BdsB1IStr01_fs25e6_if0_4ms.dat
Resampler.implementation=Pass_Through
Resampler.sample_freq_in=25000000
Resampler.sample_freq_out=25000000
Resampler.item_type=gr_complex
;######### CHANNELS GLOBAL CONFIG ############
Channels_B1.count=10
Channels.in_acquisition=1
Channel.signal=B1
Channel0.satellite = 6;
Channel1.satellite = 8;
Channel2.satellite = 9;
Channel3.satellite = 13;
Channel4.satellite = 17;
Channel5.satellite = 1;
Channel6.satellite = 2;
Channel7.satellite = 3;
Channel8.satellite = 4;
Channel9.satellite = 5;
;######### ACQUISITION GLOBAL CONFIG ############
Acquisition_B1.implementation=BEIDOU_B1I_PCPS_Acquisition
Acquisition_B1.item_type=gr_complex
Acquisition_B1.coherent_integration_time_ms=1
Acquisition_B1.pfa=0.01
;Acquisition_B1.pfa=0.0000001;
Acquisition_B1.doppler_max=10000
Acquisition_B1.doppler_step=100
Acquisition_B1.dump=true
Acquisition_B1.dump_filename=./bds_acq
Acquisition_B1.blocking=false;
Acquisition_B1.bit_transition_flag = false;
;######### TRACKING GLOBAL CONFIG ############
Tracking_B1.implementation=BEIDOU_B1I_DLL_PLL_Tracking
Tracking_B1.item_type=gr_complex
Tracking_B1.pll_bw_hz=25.0;
Tracking_B1.dll_bw_hz=2.50;
Tracking_B1.dump=false;
Tracking_B1.dump_filename=./epl_tracking_ch_
;######### TELEMETRY DECODER GPS CONFIG ############
TelemetryDecoder_B1.implementation=BEIDOU_B1I_Telemetry_Decoder
TelemetryDecoder_B1.dump=false
;######### OBSERVABLES CONFIG ############
Observables.implementation=Hybrid_Observables
Observables.dump=false
Observables.dump_filename=./observables.dat
;######### PVT CONFIG ############
PVT.implementation=RTKLIB_PVT
PVT.positioning_mode=Single ; options: Single, Static, Kinematic, PPP_Static, PPP_Kinematic
PVT.iono_model=Broadcast ; options: OFF, Broadcast, SBAS, Iono-Free-LC, Estimate_STEC, IONEX
PVT.trop_model=Saastamoinen ; options: OFF, Saastamoinen, SBAS, Estimate_ZTD, Estimate_ZTD_Grad
PVT.output_rate_ms=100
PVT.display_rate_ms=500
PVT.dump_filename=./PVT
PVT.nmea_dump_filename=./gnss_sdr_pvt.nmea;
PVT.flag_nmea_tty_port=false;
PVT.nmea_dump_devname=/dev/pts/4
PVT.flag_rtcm_server=false
PVT.flag_rtcm_tty_port=false
PVT.rtcm_dump_devname=/dev/pts/1
PVT.dump=true
PVT.rinex_version=3
PVT.rinex_output_enabled=true
PVT.gpx_output_enabled=true

@ -0,0 +1,212 @@
; This is a GNSS-SDR configuration file
; The configuration API is described at https://gnss-sdr.org/docs/sp-blocks/
; SPDX-License-Identifier: GPL-3.0-or-later
; SPDX-FileCopyrightText: (C) 2010-2020 (see AUTHORS file for a list of contributors)
; You can define your own receiver and invoke it by doing
; gnss-sdr --config_file=my_GNSS_SDR_configuration.conf
;
[GNSS-SDR]
;######### GLOBAL OPTIONS ##################
;internal_fs_sps: Internal signal sampling frequency after the signal conditioning stage [samples per second].
GNSS-SDR.internal_fs_sps=30000000
Receiver.sources_count=2
;######### CONTROL_THREAD CONFIG ############
ControlThread.wait_for_flowgraph=false
;######### SIGNAL_SOURCE CONFIG ############
;# Signal Source config for GPS, Galileo signals
SignalSource0.implementation=File_Signal_Source
SignalSource0.filename=/archive/BDS3_datasets/long/20180713_211400_3.dat
SignalSource0.item_type=ibyte
SignalSource0.sampling_frequency=10000000
SignalSource0.samples=0
SignalSource0.repeat=false
SignalSource0.dump=false
SignalSource0.enable_throttle_control=false
;# Signal Source config for BDS signals
SignalSource1.implementation=File_Signal_Source
SignalSource1.filename=/archive/BDS3_datasets/long/20180713_211400_2.dat
SignalSource1.item_type=ibyte
SignalSource1.sampling_frequency=30000000
SignalSource1.samples=0
SignalSource1.repeat=false
SignalSource1.dump=false
SignalSource1.enable_throttle_control=false
;######### SIGNAL_CONDITIONER CONFIG ############
;# Signal Conditioner config for GPS, Galileo signals
SignalConditioner0.implementation=Signal_Conditioner
DataTypeAdapter0.implementation=Ibyte_To_Complex
InputFilter0.implementation=Freq_Xlating_Fir_Filter
InputFilter0.input_item_type=gr_complex
InputFilter0.output_item_type=gr_complex
InputFilter0.taps_item_type=float
InputFilter0.number_of_taps=5
InputFilter0.number_of_bands=2
InputFilter0.band1_begin=0.0
InputFilter0.band1_end=0.70
InputFilter0.band2_begin=0.80
InputFilter0.band2_end=1.0
InputFilter0.ampl1_begin=1.0
InputFilter0.ampl1_end=1.0
InputFilter0.ampl2_begin=0.0
InputFilter0.ampl2_end=0.0
InputFilter0.band1_error=1.0
InputFilter0.band2_error=1.0
InputFilter0.filter_type=bandpass
InputFilter0.grid_density=16
InputFilter0.sampling_frequency=10000000
InputFilter0.IF=420000
Resampler0.implementation=Direct_Resampler
Resampler0.sample_freq_in=10000000
Resampler0.sample_freq_out=30000000
Resampler0.item_type=gr_complex
;# Signal Conditioner config for BDS signals
SignalConditioner1.implementation=Signal_Conditioner
DataTypeAdapter1.implementation=Ibyte_To_Complex
InputFilter1.implementation=Freq_Xlating_Fir_Filter
InputFilter1.input_item_type=gr_complex
InputFilter1.output_item_type=gr_complex
InputFilter1.taps_item_type=float
InputFilter1.number_of_taps=5
InputFilter1.number_of_bands=2
InputFilter1.band1_begin=0.0
InputFilter1.band1_end=0.70
InputFilter1.band2_begin=0.80
InputFilter1.band2_end=1.0
InputFilter1.ampl1_begin=1.0
InputFilter1.ampl1_end=1.0
InputFilter1.ampl2_begin=0.0
InputFilter1.ampl2_end=0.0
InputFilter1.band1_error=1.0
InputFilter1.band2_error=1.0
InputFilter1.filter_type=bandpass
InputFilter1.grid_density=16
InputFilter1.sampling_frequency=10000000
InputFilter1.IF=1020000
Resampler1.implementation=Pass_Through
Resampler1.sample_freq_in=30000000
Resampler1.sample_freq_out=30000000
Resampler1.item_type=gr_complex
;######### CHANNELS GLOBAL CONFIG ############
Channels_1C.count=7
Channels_B3.count=4
Channels.in_acquisition=11
;# Preparing collection for GPS satellites
Channel0.RF_channel_ID=0
Channel1.RF_channel_ID=0
Channel2.RF_channel_ID=0
Channel3.RF_channel_ID=0
Channel4.RF_channel_ID=0
Channel5.RF_channel_ID=0
Channel6.RF_channel_ID=0
Channel0.signal=1C
Channel0.satellite = 2
Channel1.signal=1C
Channel1.satellite = 5
Channel2.signal=1C
Channel2.satellite = 25
Channel3.signal=1C
Channel3.satellite = 31
Channel4.signal=1C
Channel4.satellite = 24
Channel5.signal=1C
Channel5.satellite = 6
Channel6.signal=1C
Channel6.satellite = 29
;# Preparing collection for BDS satellites
Channel7.RF_channel_ID=1
Channel8.RF_channel_ID=1
Channel9.RF_channel_ID=1
Channel10.RF_channel_ID=1
Channel7.signal=B3
Channel7.satellite = 29
Channel8.signal=B3
Channel8.satellite = 19
Channel9.signal=B3
Channel9.satellite = 20
Channel10.signal=B3
Channel10.satellite = 30
;######### ACQUISITION GLOBAL CONFIG ############
;# Acquisition config for BDS signals
Acquisition_B3.implementation=BEIDOU_B3I_PCPS_Acquisition
Acquisition_B3.item_type=gr_complex
Acquisition_B3.coherent_integration_time_ms=1
Acquisition_B3.pfa=0.01
Acquisition_B3.doppler_max=15000
Acquisition_B3.doppler_step=50
Acquisition_B3.dump=false
Acquisition_B3.dump_filename=/home/dmiralles/Documents/Research/Publications/INSIDE_GNSS/bds_leg_pvt/Data/bds_b1i_acq
Acquisition_B3.blocking=false;
Acquisition_B3.use_CFAR_algorithm=true;
Acquisition_B3.bit_transition_flag = false;
;# Acquisition config for GPS signals
Acquisition_1C.implementation=GPS_L1_CA_PCPS_Acquisition
Acquisition_1C.item_type=gr_complex
Acquisition_1C.coherent_integration_time_ms=1
Acquisition_1C.pfa=0.01
Acquisition_1C.doppler_max=15000
Acquisition_1C.doppler_step=50
Acquisition_1C.dump=true
Acquisition_1C.dump_filename=/home/dmiralles/Documents/Research/Publications/INSIDE_GNSS/bds_leg_pvt/Data/gps_l1ca_acq
Acquisition_1C.blocking=false;
Acquisition_1C.use_CFAR_algorithm=true;
Acquisition_1C.bit_transition_flag = false;
;######### TRACKING GLOBAL CONFIG ############
Tracking_B3.implementation=BEIDOU_B3I_DLL_PLL_Tracking
Tracking_B3.item_type=gr_complex
Tracking_B3.pll_bw_hz=25.0;
Tracking_B3.dll_bw_hz=2.50;
Tracking_B3.dump=true;
Tracking_B3.dump_filename=/home/dmiralles/Documents/Research/Publications/INSIDE_GNSS/bds_leg_pvt/Data/bds_b1i_trk_ch_
Tracking_1C.implementation=GPS_L1_CA_DLL_PLL_Tracking
Tracking_1C.item_type=gr_complex
Tracking_1C.pll_bw_hz=25.0;
Tracking_1C.dll_bw_hz=2.50;
Tracking_1C.dump=true;
Tracking_1C.dump_filename=/home/dmiralles/Documents/Research/Publications/INSIDE_GNSS/bds_leg_pvt/Data/gps_l1ca_trk_ch_
;######### TELEMETRY DECODER GPS CONFIG ############
TelemetryDecoder_B3.implementation=BEIDOU_B3I_Telemetry_Decoder
TelemetryDecoder_B3.dump=false
TelemetryDecoder_1C.implementation=GPS_L1_CA_Telemetry_Decoder
TelemetryDecoder_1C.dump=false
;######### OBSERVABLES CONFIG ############
Observables.implementation=Hybrid_Observables
Observables.dump=true
Observables.dump_filename=./observables.dat
;######### PVT CONFIG ############
PVT.implementation=RTKLIB_PVT
PVT.positioning_mode=Single ; options: Single, Static, Kinematic, PPP_Static, PPP_Kinematic
PVT.iono_model=OFF ; options: OFF, Broadcast, SBAS, Iono-Free-LC, Estimate_STEC, IONEX
PVT.trop_model=Saastamoinen ; options: OFF, Saastamoinen, SBAS, Estimate_ZTD, Estimate_ZTD_Grad
PVT.output_rate_ms=100
PVT.display_rate_ms=500
PVT.dump=true
PVT.dump_filename = /home/dmiralles/Documents/Research/Publications/INSIDE_GNSS/bds_leg_pvt/Data/pvt_l1
PVT.kml_output_enabled = false;
PVT.xml_output_enabled = false;
PVT.gpx_output_enabled = false;
PVT.rinex_output_enabled = false;
PVT.rtcm_output_enabled = false;
PVT.nmea_output_enabled = false;
PVT.geojson_output_enabled = false;

@ -0,0 +1,123 @@
; This is a GNSS-SDR configuration file
; The configuration API is described at https://gnss-sdr.org/docs/sp-blocks/
; SPDX-License-Identifier: GPL-3.0-or-later
; SPDX-FileCopyrightText: (C) 2010-2020 (see AUTHORS file for a list of contributors)
; You can define your own receiver and invoke it by doing
; gnss-sdr --config_file=my_GNSS_SDR_configuration.conf
;
[GNSS-SDR]
;######### GLOBAL OPTIONS ##################
;internal_fs_sps: Internal signal sampling frequency after the signal conditioning stage [samples per second].
GNSS-SDR.internal_fs_sps=50000000
;######### CONTROL_THREAD CONFIG ############
ControlThread.wait_for_flowgraph=false
;######### SIGNAL_SOURCE CONFIG ############
SignalSource.implementation=File_Signal_Source
SignalSource.filename=/archive/BDS3_datasets/BdsB3IStr01.dat
SignalSource.item_type=byte
SignalSource.sampling_frequency=50000000
SignalSource.samples=0
SignalSource.repeat=false
SignalSource.dump=false
SignalSource.enable_throttle_control=false
;SignalSource.samples=200000
;######### SIGNAL_CONDITIONER CONFIG ############
SignalConditioner.implementation=Signal_Conditioner
DataTypeAdapter.implementation=Byte_To_Short
InputFilter.implementation=Freq_Xlating_Fir_Filter
InputFilter.input_item_type=short
InputFilter.output_item_type=gr_complex
InputFilter.taps_item_type=float
InputFilter.number_of_taps=5
InputFilter.number_of_bands=2
InputFilter.band1_begin=0.0
InputFilter.band1_end=0.70
InputFilter.band2_begin=0.80
InputFilter.band2_end=1.0
InputFilter.ampl1_begin=1.0
InputFilter.ampl1_end=1.0
InputFilter.ampl2_begin=0.0
InputFilter.ampl2_end=0.0
InputFilter.band1_error=1.0
InputFilter.band2_error=1.0
InputFilter.filter_type=bandpass
InputFilter.grid_density=16
InputFilter.sampling_frequency=50000000
InputFilter.IF=12500000
InputFilter.dump = false
InputFilter.dump_filename=/home/dmiralles/Documents/gnss-sdr/src/tests/signal_samples/BdsB3IStr01_fs50e6_if0_4ms.dat
Resampler.implementation=Pass_Through
Resampler.sample_freq_in=50000000
Resampler.sample_freq_out=50000000
Resampler.item_type=gr_complex
;######### CHANNELS GLOBAL CONFIG ############
Channels_B3.count=10
Channels.in_acquisition=1
Channel.signal=B3
Channel0.satellite = 6;
Channel1.satellite = 23;
Channel2.satellite = 16;
Channel3.satellite = 18;
Channel4.satellite = 7;
Channel5.satellite = 1;
Channel6.satellite = 2;
Channel7.satellite = 3;
Channel8.satellite = 4;
Channel9.satellite = 5;
;######### ACQUISITION GLOBAL CONFIG ############
Acquisition_B3.implementation=BEIDOU_B3I_PCPS_Acquisition
Acquisition_B3.item_type=gr_complex
Acquisition_B3.coherent_integration_time_ms=3
Acquisition_B3.max_dwells = 2
Acquisition_B3.pfa=0.01
Acquisition_B3.doppler_max=10000
Acquisition_B3.doppler_step=100
Acquisition_B3.dump=false
Acquisition_B3.dump_filename=./bds_acq
;######### TRACKING GLOBAL CONFIG ############
Tracking_B3.implementation=BEIDOU_B3I_DLL_PLL_Tracking
Tracking_B3.item_type=gr_complex
Tracking_B3.pll_bw_hz=40.0;
Tracking_B3.dll_bw_hz=4.0;
Tracking_B3.pll_bw_narrow_hz=20.0;
Tracking_B3.dll_bw_narrow_hz=3.0;
Tracking_B3.dump=false;
Tracking_B3.dump_filename=./epl_tracking_ch_
;######### TELEMETRY DECODER GPS CONFIG ############
TelemetryDecoder_B3.implementation=BEIDOU_B3I_Telemetry_Decoder
TelemetryDecoder_B3.dump=false
;######### OBSERVABLES CONFIG ############
Observables.implementation=Hybrid_Observables
Observables.dump=false
Observables.dump_filename=./observables.dat
;######### PVT CONFIG ############
PVT.implementation=RTKLIB_PVT
PVT.positioning_mode=Single ; options: Single, Static, Kinematic, PPP_Static, PPP_Kinematic
PVT.iono_model=Broadcast ; options: OFF, Broadcast, SBAS, Iono-Free-LC, Estimate_STEC, IONEX
PVT.trop_model=Saastamoinen ; options: OFF, Saastamoinen, SBAS, Estimate_ZTD, Estimate_ZTD_Grad
PVT.output_rate_ms=100
PVT.display_rate_ms=500
PVT.dump_filename=./PVT
PVT.nmea_dump_filename=./gnss_sdr_pvt.nmea;
PVT.flag_nmea_tty_port=false;
PVT.nmea_dump_devname=/dev/pts/4
PVT.flag_rtcm_server=false
PVT.flag_rtcm_tty_port=false
PVT.rtcm_dump_devname=/dev/pts/1
PVT.dump=true

@ -0,0 +1,132 @@
; This is a GNSS-SDR configuration file
; The configuration API is described at https://gnss-sdr.org/docs/sp-blocks/
; SPDX-License-Identifier: GPL-3.0-or-later
; SPDX-FileCopyrightText: (C) 2010-2020 (see AUTHORS file for a list of contributors)
; You can define your own receiver and invoke it by doing
; gnss-sdr --config_file=my_GNSS_SDR_configuration.conf
;
[GNSS-SDR]
;######### GLOBAL OPTIONS ##################
;internal_fs_sps: Internal signal sampling frequency after the signal conditioning stage [samples per second].
GNSS-SDR.internal_fs_sps=30000000
;######### CONTROL_THREAD CONFIG ############
ControlThread.wait_for_flowgraph=false
;######### SIGNAL_SOURCE CONFIG ############
SignalSource.implementation=File_Signal_Source
SignalSource.filename=/archive/BDS3_datasets/long/20180713_211400_2.dat
SignalSource.item_type=ibyte
SignalSource.sampling_frequency=30000000
SignalSource.samples=0
SignalSource.repeat=false
SignalSource.dump=false
SignalSource.enable_throttle_control=false
;######### SIGNAL_CONDITIONER CONFIG ############
SignalConditioner.implementation=Signal_Conditioner
DataTypeAdapter.implementation=Ibyte_To_Complex
InputFilter.implementation=Freq_Xlating_Fir_Filter
InputFilter.input_item_type=gr_complex
InputFilter.output_item_type=gr_complex
InputFilter.taps_item_type=float
InputFilter.number_of_taps=5
InputFilter.number_of_bands=2
InputFilter.band1_begin=0.0
InputFilter.band1_end=0.70
InputFilter.band2_begin=0.80
InputFilter.band2_end=1.0
InputFilter.ampl1_begin=1.0
InputFilter.ampl1_end=1.0
InputFilter.ampl2_begin=0.0
InputFilter.ampl2_end=0.0
InputFilter.band1_error=1.0
InputFilter.band2_error=1.0
InputFilter.filter_type=bandpass
InputFilter.grid_density=16
InputFilter.sampling_frequency=30000000
InputFilter.IF=1020000
Resampler.implementation=Pass_Through
Resampler.sample_freq_in=30000000
Resampler.sample_freq_out=30000000
Resampler.item_type=gr_complex
;######### CHANNELS GLOBAL CONFIG ############
Channels_B3.count=4
Channels.in_acquisition=1
Channel.signal=B3
Channel0.satellite = 29;
Channel1.satellite = 19;
Channel2.satellite = 20;
Channel3.satellite = 30;
;Channel0.satellite = 6;
;Channel1.satellite = 7;
;Channel2.satellite = 9;
;Channel3.satellite = 16;
;Channel4.satellite = 18;
;Channel5.satellite = 1;
;Channel6.satellite = 2;
;Channel7.satellite = 3;
;Channel8.satellite = 4;
;Channel9.satellite = 5;
;Channel10.satellite = 23;
;Channel11.satellite = 25;
;Channel12.satellite = 32;
;######### ACQUISITION GLOBAL CONFIG ############
Acquisition_B3.implementation=BEIDOU_B3I_PCPS_Acquisition
Acquisition_B3.item_type=gr_complex
Acquisition_B3.coherent_integration_time_ms=1
Acquisition_B3.max_dwells = 1
Acquisition_B3.pfa=0.01
;Acquisition_B3.pfa=0.0000001;
Acquisition_B3.doppler_max=10000
Acquisition_B3.doppler_step=50
Acquisition_B3.dump=false
Acquisition_B3.dump_filename=./bds_acq
Acquisition_B3.blocking=false;
Acquisition_B3.bit_transition_flag = false;
;######### TRACKING GLOBAL CONFIG ############
Tracking_B3.implementation=BEIDOU_B3I_DLL_PLL_Tracking
Tracking_B3.item_type=gr_complex
Tracking_B3.pll_bw_hz=25.0;
Tracking_B3.dll_bw_hz=2.50;
Tracking_B3.dump=false;
Tracking_B3.dump_filename=./epl_tracking_ch_
;######### TELEMETRY DECODER GPS CONFIG ############
TelemetryDecoder_B3.implementation=BEIDOU_B3I_Telemetry_Decoder
TelemetryDecoder_B3.dump=false
;######### OBSERVABLES CONFIG ############
Observables.implementation=Hybrid_Observables
Observables.dump=false
Observables.dump_filename=./observables.dat
;######### PVT CONFIG ############
PVT.implementation=RTKLIB_PVT
PVT.positioning_mode=Single ; options: Single, Static, Kinematic, PPP_Static, PPP_Kinematic
PVT.iono_model=OFF ; options: OFF, Broadcast, SBAS, Iono-Free-LC, Estimate_STEC, IONEX
PVT.trop_model=Saastamoinen ; options: OFF, Saastamoinen, SBAS, Estimate_ZTD, Estimate_ZTD_Grad
PVT.output_rate_ms=100
PVT.display_rate_ms=500
PVT.dump_filename=./PVT
PVT.nmea_dump_filename=./gnss_sdr_pvt.nmea;
PVT.flag_nmea_tty_port=false;
PVT.nmea_dump_devname=/dev/pts/4
PVT.flag_rtcm_server=false
PVT.flag_rtcm_tty_port=false
PVT.rtcm_dump_devname=/dev/pts/1
PVT.dump=true

@ -0,0 +1,81 @@
; This is a GNSS-SDR configuration file
; The configuration API is described at https://gnss-sdr.org/docs/sp-blocks/
; SPDX-License-Identifier: GPL-3.0-or-later
; SPDX-FileCopyrightText: (C) 2010-2020 (see AUTHORS file for a list of contributors)
; 5C is the channel identifier for BeiDou B2a, both the data signal and the pilot signal
[GNSS-SDR]
;######### GLOBAL OPTIONS ##################
;internal_fs_sps: Internal signal sampling frequency after the signal conditioning stage [samples per second].
GNSS-SDR.internal_fs_sps=30000000
;######### SIGNAL_SOURCE CONFIG ############
SignalSource.implementation=File_Signal_Source
;SignalSource.filename=/home/dmiralles/Documents/gnss-sdr/src/tests/signal_samples/USRP_BDS_B2a_201805171115_fs_25e6_if0e3_ishort_200ms.bin
SignalSource.filename=/archive/USRP_BDS_B3I_201805171118_fs_25e6_if0e3_ishort.bin
SignalSource.item_type=ishort
SignalSource.sampling_frequency=30000000
SignalSource.samples=0
SignalSource.repeat=false
SignalSource.enable_throttle_control=false
;######### SIGNAL_CONDITIONER CONFIG ############
SignalConditioner.implementation=Signal_Conditioner
InputFilter.implementation=Pass_Through
DataTypeAdapter.implementation=Ishort_To_Complex
Resampler.implementation=Direct_Resampler
Resampler.sample_freq_in=30000000
Resampler.sample_freq_out=30000000
Resampler.item_type=gr_complex
;######### CHANNELS GLOBAL CONFIG ############
Channel.signal=B3
Channels.in_acquisition=1
Channels_B3.count=5;
Channel0.satellite = 27;
Channel1.satellite = 22;
Channel2.satellite = 21;
Channel3.satellite = 28;
Channel4.satellite = 30;
;######### ACQUISITION GLOBAL CONFIG ############
Acquisition_B3.implementation=BEIDOU_B3I_PCPS_Acquisition
Acquisition_B3.item_type=gr_complex
Acquisition_B3.coherent_integration_time_ms = 1
Acquisition_B3.max_dwells = 1
Acquisition_B3.pfa=0.01
Acquisition_B3.doppler_max=10000
Acquisition_B3.doppler_step=50
Acquisition_B3.dump=true
Acquisition_B3.dump_channel = 0;
Acquisition_B3.dump_filename=/archive/bds_b3i_acq
Acquisition_B3.blocking=false;
Acquisition_B3.bit_transition_flag = false;
;######### TRACKING GLOBAL CONFIG ############
Tracking_B3.implementation= BEIDOU_B3I_DLL_PLL_Tracking;
Tracking_B3.item_type=gr_complex
Tracking_B3.early_late_space_chips=0.5
Tracking_B3.pll_bw_hz=25.0;
Tracking_B3.dll_bw_hz=2.0;
Tracking_B3.dump=true;
Tracking_B3.dump_filename=/archive/bds_b3i_trk_ch_
;######### TELEMETRY DECODER GPS CONFIG ############
TelemetryDecoder_B3.implementation=BEIDOU_B3I_Telemetry_Decoder
TelemetryDecoder_B3.dump=true
TelemetryDecoder_B3.dump_filename=/archive/bds_b3i_tel_dec.dat
;######### OBSERVABLES CONFIG ############
Observables.implementation=Hybrid_Observables
Observables.dump=true;
Observables.dump_filename=/archive/bds_b3i_observables.dat
;######### PVT CONFIG ############
PVT.implementation=RTKLIB_PVT
PVT.averaging_depth=100
PVT.flag_averaging=true
PVT.output_rate_ms=10
PVT.display_rate_ms=500

@ -0,0 +1,142 @@
; This is a GNSS-SDR configuration file
; The configuration API is described at https://gnss-sdr.org/docs/sp-blocks/
; SPDX-License-Identifier: GPL-3.0-or-later
; SPDX-FileCopyrightText: (C) 2010-2020 (see AUTHORS file for a list of contributors)
[GNSS-SDR]
;######### GLOBAL OPTIONS ##################
GNSS-SDR.internal_fs_sps=6625000
Receiver.sources_count=2
;######### SIGNAL_SOURCE CONFIG ############
SignalSource0.implementation=File_Signal_Source
SignalSource0.filename=/archive/NT1065_L1_20160923_fs6625e6_if60e3_schar.bin ; <- PUT YOUR FILE HERE
SignalSource0.item_type=ibyte
SignalSource0.sampling_frequency=6625000
SignalSource0.samples=0
SignalSource0.dump=false;
SignalSource0.dump_filename=/archive/signal_glonass.bin
SignalSource1.implementation=File_Signal_Source
SignalSource1.filename=/archive/NT1065_GLONASS_L1_20160923_fs6625e6_if0e3_schar.bin ; <- PUT YOUR FILE HERE
SignalSource1.item_type=ibyte
SignalSource1.sampling_frequency=6625000
SignalSource1.samples=0
SignalSource1.dump=false;
SignalSource1.dump_filename=/archive/signal_glonass.bin
;######### SIGNAL_CONDITIONER CONFIG ############
SignalConditioner0.implementation=Signal_Conditioner
DataTypeAdapter0.implementation=Ibyte_To_Complex
InputFilter0.implementation=Freq_Xlating_Fir_Filter
InputFilter0.item_type=gr_complex
InputFilter0.output_item_type=gr_complex
InputFilter0.taps_item_type=float
InputFilter0.number_of_taps=5
InputFilter0.number_of_bands=2
InputFilter0.band1_begin=0.0
InputFilter0.band1_end=0.70
InputFilter0.band2_begin=0.80
InputFilter0.band2_end=1.0
InputFilter0.ampl1_begin=1.0
InputFilter0.ampl1_end=1.0
InputFilter0.ampl2_begin=0.0
InputFilter0.ampl2_end=0.0
InputFilter0.band1_error=1.0
InputFilter0.band2_error=1.0
InputFilter0.filter_type=bandpass
InputFilter0.grid_density=16
InputFilter0.sampling_frequency=6625000
InputFilter0.IF=60000
Resampler0.implementation=Direct_Resampler
Resampler0.sample_freq_in=6625000
Resampler0.sample_freq_out=6625000
Resampler0.item_type=gr_complex
SignalConditioner1.implementation=Signal_Conditioner
DataTypeAdapter1.implementation=Ibyte_To_Complex
InputFilter1.implementation=Pass_Through
InputFilter1.item_type=gr_complex
Resampler1.implementation=Pass_Through
Resampler1.item_type=gr_complex
;######### CHANNELS GLOBAL CONFIG ############
Channels.in_acquisition=1
Channels_1G.count=5
Channels_1C.count=5
;# Defining GLONASS satellites
Channel0.RF_channel_ID=0
Channel1.RF_channel_ID=0
Channel2.RF_channel_ID=0
Channel3.RF_channel_ID=0
Channel4.RF_channel_ID=0
Channel5.RF_channel_ID=1
Channel6.RF_channel_ID=1
Channel7.RF_channel_ID=1
Channel8.RF_channel_ID=1
Channel9.RF_channel_ID=1
;######### ACQUISITION GLOBAL CONFIG ############
Acquisition_1C.implementation=GPS_L1_CA_PCPS_Acquisition
Acquisition_1C.item_type=gr_complex
Acquisition_1C.threshold=0.0
Acquisition_1C.pfa=0.00001
Acquisition_1C.doppler_max=10000
Acquisition_1C.doppler_step=250
Acquisition_1C.dump=false;
Acquisition_1C.dump_filename=/archive/gps_acquisition.dat
;Acquisition_1C.coherent_integration_time_ms=10
Acquisition_1G.implementation=GLONASS_L1_CA_PCPS_Acquisition
Acquisition_1G.item_type=gr_complex
Acquisition_1G.threshold=0.0
Acquisition_1G.pfa=0.00001
Acquisition_1G.doppler_max=10000
Acquisition_1G.doppler_step=250
Acquisition_1G.dump=false;
Acquisition_1G.dump_filename=/archive/glo_acquisition.dat
;Acquisition_1G.coherent_integration_time_ms=10
;######### TRACKING GLOBAL CONFIG ############
Tracking_1C.implementation=GPS_L1_CA_DLL_PLL_Tracking
Tracking_1C.item_type=gr_complex
Tracking_1C.early_late_space_chips=0.5
Tracking_1C.pll_bw_hz=20.0;
Tracking_1C.dll_bw_hz=2.0;
Tracking_1C.dump=false;
Tracking_1C.dump_filename=/archive/gps_tracking_ch_
Tracking_1G.implementation=GLONASS_L1_CA_DLL_PLL_Tracking
Tracking_1G.item_type=gr_complex
Tracking_1G.early_late_space_chips=0.5
Tracking_1G.pll_bw_hz=25.0;
Tracking_1G.dll_bw_hz=3.0;
Tracking_1G.dump=false;
Tracking_1G.dump_filename=/archive/glo_tracking_ch_
;######### TELEMETRY DECODER GPS CONFIG ############
TelemetryDecoder_1C.implementation=GPS_L1_CA_Telemetry_Decoder
TelemetryDecoder_1G.implementation=GLONASS_L1_CA_Telemetry_Decoder
;######### OBSERVABLES CONFIG ############
Observables.implementation=Hybrid_Observables
Observables.dump=false;
Observables.dump_filename=/archive/gnss_observables.dat
;######### PVT CONFIG ############
PVT.implementation=RTKLIB_PVT
PVT.output_rate_ms=100
PVT.display_rate_ms=500
PVT.trop_model=Saastamoinen
PVT.flag_rtcm_server=false
PVT.flag_rtcm_tty_port=false
PVT.rtcm_dump_devname=/dev/pts/1
PVT.rtcm_tcp_port=2101
PVT.rtcm_MT1019_rate_ms=5000
PVT.rtcm_MT1045_rate_ms=5000
PVT.rtcm_MT1097_rate_ms=1000
PVT.rtcm_MT1077_rate_ms=1000
PVT.rinex_version=2

@ -0,0 +1,143 @@
; This is a GNSS-SDR configuration file
; The configuration API is described at https://gnss-sdr.org/docs/sp-blocks/
; SPDX-License-Identifier: GPL-3.0-or-later
; SPDX-FileCopyrightText: (C) 2010-2020 (see AUTHORS file for a list of contributors)
[GNSS-SDR]
;######### GLOBAL OPTIONS ##################
GNSS-SDR.internal_fs_sps=6625000
Receiver.sources_count=2
;######### SIGNAL_SOURCE CONFIG ############
SignalSource0.implementation=File_Signal_Source
SignalSource0.filename=/archive/NT1065_L2_20160923_fs6625e6_if60e3_schar.bin ; <- PUT YOUR FILE HERE
SignalSource0.item_type=ibyte
SignalSource0.sampling_frequency=6625000
SignalSource0.samples=0
SignalSource0.dump=false;
SignalSource0.dump_filename=/archive/signal_glonass.bin
SignalSource1.implementation=File_Signal_Source
SignalSource1.filename=/archive/NT1065_GLONASS_L1_20160923_fs6625e6_if0e3_schar.bin ; <- PUT YOUR FILE HERE
SignalSource1.item_type=ibyte
SignalSource1.sampling_frequency=6625000
SignalSource1.samples=0
SignalSource1.dump=false;
SignalSource1.dump_filename=/archive/signal_glonass.bin
;######### SIGNAL_CONDITIONER CONFIG ############
SignalConditioner0.implementation=Signal_Conditioner
DataTypeAdapter0.implementation=Ibyte_To_Complex
InputFilter0.implementation=Freq_Xlating_Fir_Filter
InputFilter0.item_type=gr_complex
InputFilter0.output_item_type=gr_complex
InputFilter0.taps_item_type=float
InputFilter0.number_of_taps=5
InputFilter0.number_of_bands=2
InputFilter0.band1_begin=0.0
InputFilter0.band1_end=0.70
InputFilter0.band2_begin=0.80
InputFilter0.band2_end=1.0
InputFilter0.ampl1_begin=1.0
InputFilter0.ampl1_end=1.0
InputFilter0.ampl2_begin=0.0
InputFilter0.ampl2_end=0.0
InputFilter0.band1_error=1.0
InputFilter0.band2_error=1.0
InputFilter0.filter_type=bandpass
InputFilter0.grid_density=16
InputFilter0.sampling_frequency=6625000
InputFilter0.IF=60000
Resampler0.implementation=Pass_Through
Resampler0.item_type=gr_complex
SignalConditioner1.implementation=Signal_Conditioner
DataTypeAdapter1.implementation=Ibyte_To_Complex
InputFilter1.implementation=Pass_Through
InputFilter1.item_type=gr_complex
Resampler1.implementation=Pass_Through
Resampler1.item_type=gr_complex
;######### CHANNELS GLOBAL CONFIG ############
Channels.in_acquisition=5
Channels_2S.count=5
Channels_1G.count=5
;# Defining GLONASS satellites
Channel0.RF_channel_ID=0
Channel0.signal=2S
Channel1.RF_channel_ID=0
Channel1.signal=2S
Channel2.RF_channel_ID=0
Channel2.signal=2S
Channel3.RF_channel_ID=0
Channel3.signal=2S
Channel4.RF_channel_ID=0
Channel4.signal=2S
Channel5.RF_channel_ID=1
Channel6.RF_channel_ID=1
Channel7.RF_channel_ID=1
Channel8.RF_channel_ID=1
Channel9.RF_channel_ID=1
;######### ACQUISITION GLOBAL CONFIG ############
Acquisition_2S.implementation=GPS_L2_M_PCPS_Acquisition
Acquisition_2S.item_type=gr_complex
Acquisition_2S.threshold=0.0
Acquisition_2S.pfa=0.00001
Acquisition_2S.doppler_max=10000
Acquisition_2S.doppler_step=60
Acquisition_2S.max_dwells=1
Acquisition_1G.implementation=GLONASS_L1_CA_PCPS_Acquisition
Acquisition_1G.item_type=gr_complex
Acquisition_1G.threshold=0.0
Acquisition_1G.pfa=0.00001
Acquisition_1G.doppler_max=10000
Acquisition_1G.doppler_step=250
Acquisition_1G.dump=false;
Acquisition_1G.dump_filename=/archive/glo_acquisition.dat
;######### TRACKING GLOBAL CONFIG ############
Tracking_2S.implementation=GPS_L2_M_DLL_PLL_Tracking
Tracking_2S.item_type=gr_complex
Tracking_2S.early_late_space_chips=0.5
Tracking_2S.pll_bw_hz=2.0;
Tracking_2S.dll_bw_hz=0.250;
Tracking_2S.order=2;
Tracking_2S.dump=false;
Tracking_2S.dump_filename=/archive/gps_tracking_ch_
Tracking_1G.implementation=GLONASS_L1_CA_DLL_PLL_Tracking
Tracking_1G.item_type=gr_complex
Tracking_1G.early_late_space_chips=0.5
Tracking_1G.pll_bw_hz=25.0;
Tracking_1G.dll_bw_hz=3.0;
Tracking_1G.dump=false;
Tracking_1G.dump_filename=/archive/glo_tracking_ch_
;######### TELEMETRY DECODER GPS CONFIG ############
TelemetryDecoder_2S.implementation=GPS_L2C_Telemetry_Decoder
TelemetryDecoder_1G.implementation=GLONASS_L1_CA_Telemetry_Decoder
;######### OBSERVABLES CONFIG ############
Observables.implementation=Hybrid_Observables
Observables.dump=false;
Observables.dump_filename=/archive/gnss_observables.dat
;######### PVT CONFIG ############
PVT.implementation=RTKLIB_PVT
PVT.output_rate_ms=100
PVT.display_rate_ms=500
PVT.trop_model=Saastamoinen
PVT.flag_rtcm_server=true
PVT.flag_rtcm_tty_port=false
PVT.rtcm_dump_devname=/dev/pts/1
PVT.rtcm_tcp_port=2101
PVT.rtcm_MT1019_rate_ms=5000
PVT.rtcm_MT1045_rate_ms=5000
PVT.rtcm_MT1097_rate_ms=1000
PVT.rtcm_MT1077_rate_ms=1000
PVT.rinex_version=3

@ -0,0 +1,82 @@
; This is a GNSS-SDR configuration file
; The configuration API is described at https://gnss-sdr.org/docs/sp-blocks/
; SPDX-License-Identifier: GPL-3.0-or-later
; SPDX-FileCopyrightText: (C) 2010-2020 (see AUTHORS file for a list of contributors)
[GNSS-SDR]
;######### GLOBAL OPTIONS ##################
GNSS-SDR.internal_fs_sps=6625000
;######### SIGNAL_SOURCE CONFIG ############
SignalSource.implementation=File_Signal_Source
SignalSource.filename=/media/dmiralles/Seagate Backup Plus Drive/GNSS Data/NT1065_GLONASS_L1_20160923_fs6625e6_if0e3_schar.bin ; <- PUT YOUR FILE HERE ; <- PUT YOUR FILE HERE
SignalSource.item_type=ibyte
SignalSource.sampling_frequency=6625000
SignalSource.samples=0
SignalSource.dump=false;
SignalSource.dump_filename=/archive/signal_glonass.bin
;######### SIGNAL_CONDITIONER CONFIG ############
SignalConditioner.implementation=Signal_Conditioner
DataTypeAdapter.implementation=Ibyte_To_Complex
InputFilter.implementation=Pass_Through
InputFilter.item_type=gr_complex
Resampler.implementation=Pass_Through
Resampler.item_type=gr_complex
;######### CHANNELS GLOBAL CONFIG ############
Channel.signal=1G
Channels.in_acquisition=1
Channels_1G.count=5
Channel0.satellite=24 ; k=
Channel1.satellite=1 ; k=1
Channel2.satellite=2 ; k=-4
Channel3.satellite=20 ; k=-5
Channel4.satellite=21 ; k=4
;######### ACQUISITION GLOBAL CONFIG ############
Acquisition_1G.implementation=GLONASS_L1_CA_PCPS_Acquisition
Acquisition_1G.item_type=gr_complex
Acquisition_1G.threshold=0.0
Acquisition_1G.pfa=0.0001
Acquisition_1G.doppler_max=10000
Acquisition_1G.doppler_step=250
Acquisition_1G.dump=true;
Acquisition_1G.dump_filename=/archive/glo_acquisition.dat
;Acquisition_1G.coherent_integration_time_ms=1
;Acquisition_1G.max_dwells = 5
;######### TRACKING GLOBAL CONFIG ############
Tracking_1G.implementation=GLONASS_L1_CA_DLL_PLL_Tracking
Tracking_1G.item_type=gr_complex
Tracking_1G.early_late_space_chips=0.5
Tracking_1G.pll_bw_hz=25.0;
Tracking_1G.dll_bw_hz=3.0;
Tracking_1G.dump=true;
Tracking_1G.dump_filename=/archive/glo_tracking_ch_
;######### TELEMETRY DECODER GPS CONFIG ############
TelemetryDecoder_1G.implementation=GLONASS_L1_CA_Telemetry_Decoder
;######### OBSERVABLES CONFIG ############
Observables.implementation=Hybrid_Observables
Observables.dump=true;
Observables.dump_filename=/archive/glo_observables.dat
;######### PVT CONFIG ############
PVT.implementation=RTKLIB_PVT
PVT.positioning_mode=Single
PVT.output_rate_ms=100
PVT.display_rate_ms=500
PVT.trop_model=Saastamoinen
PVT.flag_rtcm_server=false
PVT.flag_rtcm_tty_port=false
PVT.rtcm_dump_devname=/dev/pts/1
PVT.rtcm_tcp_port=2101
PVT.rtcm_MT1019_rate_ms=5000
PVT.rtcm_MT1045_rate_ms=5000
PVT.rtcm_MT1097_rate_ms=1000
PVT.rtcm_MT1077_rate_ms=1000
PVT.rinex_version=2

@ -0,0 +1,86 @@
; This is a GNSS-SDR configuration file
; The configuration API is described at https://gnss-sdr.org/docs/sp-blocks/
; SPDX-License-Identifier: GPL-3.0-or-later
; SPDX-FileCopyrightText: (C) 2010-2020 (see AUTHORS file for a list of contributors)
[GNSS-SDR]
;######### GLOBAL OPTIONS ##################
GNSS-SDR.internal_fs_sps=6625000
;######### SIGNAL_SOURCE CONFIG ############
SignalSource.implementation=File_Signal_Source
SignalSource.filename=/archive/NT1065_GLONASS_L1_20160923_fs6625e6_if0e3_schar.bin ; <- PUT YOUR FILE HERE
SignalSource.item_type=ibyte
SignalSource.sampling_frequency=6625000
SignalSource.samples=0
SignalSource.dump=false;