Mark when we run the execlist tasklet following the interrupt, so we
don't probe a potentially uninitialised register when submitting the
contexts multiple times before the hardware responds.
v2: Use a shared engine->irq_posted
v3: Always use locked bitops to be sure of atomicity wrt to other bits
in the mask.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170124152021.26587-1-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
We need to prevent resubmission of the context immediately following an
initial resubmit (which does a lite-restore preemption). Currently we do
this by disabling all submission whilst the context is still active, but
we can improve this by limiting the restriction to only until we
receive notification from the context-switch interrupt that the
lite-restore preemption is complete.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170124110009.28947-2-chris@chris-wilson.co.uk
This w/a (WaClearTdlStateAckDirtyBits) was only used for preproduction hw,
which is no longer in use. Remove the workaround to simplify the code.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170123130601.2281-5-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
This w/a (WaSetDisablePixMaskCammingAndRhwoInCommonSliceChicken) was only
used for preproduction hw, which is no longer in use. Remove the
workaround to simplify the code.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170123130601.2281-4-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
This w/a (WaDisableCtxRestoreArbitration) was only used for preproduction
hw, which is no longer in use. Remove the workaround to simplify the code.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170123130601.2281-3-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
This w/a was only used for preproduction hw, which is no longer in use.
Remove the workaround to simplify the code.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170123130601.2281-2-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
This w/a (WaEnableForceRestoreInCtxtDescForVCS) was only used for
preproduction hw, which is no longer in use. Remove the workaround to
simplify the code.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170123130601.2281-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
When execlists signals the context completion, it also provides the
context id for the status event. Assert that id matches the one we expect.
v2: The upper dword of the context status is a duplicate of the upper
dword from elsp submission (i.e. includes the group id as well as the
context id). Include this check as well.
v3: Only check against lrc_desc (as this contains the hw_id check)
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170123113132.18665-2-chris@chris-wilson.co.uk
With the introduce of i915_vma_instance() for obtaining the VMA
singleton for a (obj, vm, view) tuple, we can remove the
i915_vma_create() in favour of a single entry point. We do incur a
lookup onto an empty tree, but the i915_vma_create() were being called
infrequently and during initialisation, so the small overhead is
negligible.
v2: Drop the i915_ prefix from the now static vma_create() function
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170116152131.18089-4-chris@chris-wilson.co.uk
Move the GuC invalidation of its ggtt TLB to where we perform the ggtt
modification rather than proliferate it into all the callers of the
insert (which may or may not in fact have to do the insertion).
v2: Just do the guc invalidate unconditionally, (afaict) it has no impact
without the guc loaded on gen8+
v3: Conditionally invalidate the guc - just in case that register has
not been validated for other modes.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170112110050.25333-1-chris@chris-wilson.co.uk
The WaDisableLSQCROPERFforOCL workaround has the side effect of
disabling an L3SQ optimization that has huge performance implications
and is unlikely to be necessary for the correct functioning of usual
graphic workloads. Userspace is free to re-enable the workaround on
demand, and is generally in a better position to determine whether the
workaround is necessary than the DRM is (e.g. only during the
execution of compute kernels that rely on both L3 fences and HDC R/W
requests).
The same workaround seems to apply to BDW (at least to production
stepping G1) and SKL as well (the internal workaround database claims
that it does for all steppings, while the BSpec workaround table only
mentions pre-production steppings), but the DRM doesn't do anything
beyond whitelisting the L3SQCREG4 register so userspace can enable it
when it sees fit. Do the same on KBL platforms.
Improves performance of the GFXBench4 gl_manhattan31 benchmark by 60%,
and gl_4 (AKA car chase) by 14% on a KBL GT2 running Mesa master --
This is followed by a regression of 35% and 10% respectively for the
same benchmarks and platform caused by my recent patch series
switching userspace to use the dataport constant cache instead of the
sampler to implement uniform pull constant loads, which caused us to
hit more heavily the L3 cache (and on platforms other than KBL had the
opposite effect of improving performance of the same two benchmarks).
The overall effect on KBL of this change combined with the recent
userspace change is respectively 4.6% and 2.6%. SynMark2 OglShMapPcf
was affected by the constant cache changes (though it improved as it
did on other platforms rather than regressing), but is not
significantly affected by this patch (with statistical significance of
5% and sample size 20).
v2: Drop some more code to avoid unused variable warning.
Fixes: 738fa1b312 ("drm/i915/kbl: Add WaDisableLSQCROPERFforOCL")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99256
Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Cc: Eero Tamminen <eero.t.tamminen@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: beignet@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v4.7+
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
[Removed double Fixes tag]
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1484217894-20505-1-git-send-email-mika.kuoppala@intel.com
Check if ppgtt is valid for context when init reg state. For gvt
context which has no i915 allocated ppgtt, failed to check that
would cause kernel null ptr reference error.
v2: remove !48bit ppgtt case as we'll always update before submit (Chris)
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170109131453.3943-1-zhenyuw@linux.intel.com
Start converting over from the byte count to its semantic macro, either
we want to allocate the size of a physical page in main memory or we
want the size of a virtual page in the GTT. 4096 could mean either, but
PAGE_SIZE and I915_GTT_PAGE_SIZE are explicit and should help improve
code comprehension and future changes. In the future, we may want to use
variable GTT page sizes and so have the challenge of knowing which
hardcoded values were used to represent a physical page vs the virtual
page.
v2: Look for a few more 4096s to convert, discover IS_ALIGNED().
v3: 4096ul paranoia, make fence alignment a distinct value of 4096, keep
bdw stolen w/a as 4096 until we know better.
v4: Add asserts that i915_vma_insert() start/end are aligned to GTT page
sizes.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170110144734.26052-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
The kernel context (dev_priv->kernel_context) is unique in that it is
not associated with any user filp - it is the only one with
ctx->file_priv == NULL. This is a simpler test than comparing it against
dev_priv->kernel_context which involves some pointer dancing.
In checking that this is true, we notice that the gvt context is
allocating itself a i915_hw_ppgtt it doesn't use and not flagging that
its file_priv should be invalid.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170106152013.24684-5-chris@chris-wilson.co.uk
Empirically we restart following a GPU reset more successfully if we call
lrc_init_hws() (which contains a posting read) last. (The failure mode
that was observed was that breadcrumb writes into the HWS from the
recovered requests went astray leading to the context-switch maintaining
forward progress, but the requests not being retired/completed.)
For clarity, lrc_init_hws() is inlined (and the unused function then
removed).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170105153023.30575-3-chris@chris-wilson.co.uk
The context has to obey the same offset requirements as the ring,
so we can re-use the same bias value we computed for the ring instead of
unconditionally using GUC_WOPCM_TOP.
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1482537382-28584-2-git-send-email-daniele.ceraolospurio@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
GuC will validate the ring offset and fail if it is in the
[0, GUC_WOPCM_TOP) range. The bias is conditionally applied only
if GuC loading is enabled (we can't check for guc submission enabled as
in other cases because HuC loading requires this fix).
Note that the default context is processed before enable_guc_loading is
sanitized, so we might still apply the bias to its ring even if it is
not needed.
v2: compute the value during ctx init and pass it to
intel_ring_pin (Chris), updated commit message
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1482537382-28584-1-git-send-email-daniele.ceraolospurio@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
A fairly trivial move of a matching pair of routines (for preparing a
request for construction) onto an engine vfunc. The ulterior motive is
to be able to create a mock request implementation.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161218153724.8439-7-chris@chris-wilson.co.uk
PIN_HIGH is an expensive operation (in comparison to allocating from the
hole stack) unsuitable for frequent use (such as switching between
contexts). However, the kernel context should be pinned just once for
the lifetime of the driver, and here it is appropriate to keep it out of
the mappable range (in order to maximise mappable space for users).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161218153724.8439-6-chris@chris-wilson.co.uk
The requests conversion introduced a nasty bug where we could generate a
new request in the middle of constructing a request if we needed to idle
the system in order to evict space for a context. The request to idle
would be executed (and waited upon) before the current one, creating a
minor havoc in the seqno accounting, as we will consider the current
request to already be completed (prior to deferred seqno assignment) but
ring->last_retired_head would have been updated and still could allow
us to overwrite the current request before execution.
We also employed two different mechanisms to track the active context
until it was switched out. The legacy method allowed for waiting upon an
active context (it could forcibly evict any vma, including context's),
but the execlists method took a step backwards by pinning the vma for
the entire active lifespan of the context (the only way to evict was to
idle the entire GPU, not individual contexts). However, to circumvent
the tricky issue of locking (i.e. we cannot take struct_mutex at the
time of i915_gem_request_submit(), where we would want to move the
previous context onto the active tracker and unpin it), we take the
execlists approach and keep the contexts pinned until retirement.
The benefit of the execlists approach, more important for execlists than
legacy, was the reduction in work in pinning the context for each
request - as the context was kept pinned until idle, it could short
circuit the pinning for all active contexts.
We introduce new engine vfuncs to pin and unpin the context
respectively. The context is pinned at the start of the request, and
only unpinned when the following request is retired (this ensures that
the context is idle and coherent in main memory before we unpin it). We
move the engine->last_context tracking into the retirement itself
(rather than during request submission) in order to allow the submission
to be reordered or unwound without undue difficultly.
And finally an ulterior motive for unifying context handling was to
prepare for mock requests.
v2: Rename to last_retired_context, split out legacy_context tracking
for MI_SET_CONTEXT.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161218153724.8439-3-chris@chris-wilson.co.uk
Just a simple move to avoid a forward declaration, though the diff likes
to present itself as a move of intel_logical_ring_alloc_request_extras()
in the opposite direction.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161218153724.8439-2-chris@chris-wilson.co.uk
Commit 3b3f1650b1 ("drm/i915: Allocate intel_engine_cs
structure only for the enabled engines") introduced the
dynanically allocated engine instances and created an
potential use after free scenario in logical_render_ring_init
where lrc_destroy_wa_ctx_obj could be called after the engine
instance has been freed.
This can only happen during engine setup/init error handling
which luckily does not happen ever in practice.
Fix is to not call lrc_destroy_wa_ctx_obj since it would have
already been executed from the preceding engine cleanup.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 3b3f1650b1 ("drm/i915: Allocate intel_engine_cs structure only for the enabled engines")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1481894322-2145-1-git-send-email-tvrtko.ursulin@linux.intel.com
list.h provides a macro for updating the next element in a safe
list-iter, so let's use it so that it is hopefully clearer to the reader
about the unusual behaviour, and also easier to grep.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161205142941.21965-6-chris@chris-wilson.co.uk
Makes all GEM object constructors consistent.
v2: Fix compilation in GVT code.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> (v1)
This reverts commit 27745e829a ("drm/i915/execlists: Use a local lock
for dfs_link access") as the struct_mutex was required to prevent
concurrent retiring and freeing, now restored in the previous patch.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: David Weinehall <david.weinehall@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161128143649.4289-2-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
For a single_port_submission context, GVT expects that it can only be
submitted to port 0, and there shouldn't be any other context in port 1
at the same time. This is required by GVT-g context to have an opportunity
to save/restore some non-hw context render registers.
This patch is to workaround GVT-g.
v2: optimized code by following Chris's advice, and added more comments to
explain the patch.
v3: followed the coding style.
Signed-off-by: Min He <min.he@intel.com>
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1479305104-17049-1-git-send-email-min.he@intel.com
Avoid requiring struct_mutex for exclusive access to the temporary
dfs_link inside the i915_dependency as not all callers may want to touch
struct_mutex. So rather than force them to take a highly contended
lock, introduce a local lock for the execlists schedule operation.
Reported-by: David Weinehall <david.weinehall@linux.intel.com>
Fixes: 9a151987d7 ("drm/i915: Add execution priority boosting for mmioflips")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: David Weinehall <david.weinehall@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161116152721.11053-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Track the priority of each request and use it to determine the order in
which we submit requests to the hardware via execlists.
The priority of the request is determined by the user (eventually via
the context) but may be overridden at any time by the driver. When we set
the priority of the request, we bump the priority of all of its
dependencies to match - so that a high priority drawing operation is not
stuck behind a background task.
When the request is ready to execute (i.e. we have signaled the submit
fence following completion of all its dependencies, including third
party fences), we put the request into a priority sorted rbtree to be
submitted to the hardware. If the request is higher priority than all
pending requests, it will be submitted on the next context-switch
interrupt as soon as the hardware has completed the current request. We
do not currently preempt any current execution to immediately run a very
high priority request, at least not yet.
One more limitation, is that this is first implementation is for
execlists only so currently limited to gen8/gen9.
v2: Replace recursive priority inheritance bumping with an iterative
depth-first search list.
v3: list_next_entry() for walking lists
v4: Explain how the dfs solves the recursion problem with PI.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161114204105.29171-8-chris@chris-wilson.co.uk
Defer the transfer from the client's timeline onto the execution
timeline from the point of readiness to the point of actual submission.
For example, in execlists, a request is finally submitted to hardware
when the hardware is ready, and only put onto the hardware queue when
the request is ready. By deferring the transfer, we ensure that the
timeline is maintained in retirement order if we decide to queue the
requests onto the hardware in a different order than fifo.
v2: Rebased onto distinct global/user timeline lock classes.
v3: Play with the position of the spin_lock().
v4: Nesting finally resolved with distinct sw_fence lock classes.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161114204105.29171-4-chris@chris-wilson.co.uk
We assume that the GPU is idle once receiving the seqno via the last
request's user interrupt. In execlist mode the corresponding context
completed interrupt can be delayed though and until this latter
interrupt arrives we consider the request to be pending on the ELSP
submit port. This can cause a problem during system suspend where this
last request will be seen by the resume code as still pending. Such
pending requests are normally replayed after a GPU reset, but during
resume we reset both SW and HW tracking of the ring head/tail pointers,
so replaying the pending request with its stale tail pointer will leave
the ring in an inconsistent state. A subsequent request submission can
lead then to the GPU executing from uninitialized area in the ring
behind the above stale tail pointer.
Fix this by making sure any pending request on the ELSP port is
completed before suspending. I used a polling wait since the completion
time I measured was <1ms and since normally we only need to wait during
system suspend. GPU idling during runtime suspend is scheduled with a
delay (currently 50-100ms) after the retirement of the last request at
which point the context completed interrupt must have arrived already.
The chance of this bug was increased by
commit 1c777c5d1d
Author: Imre Deak <imre.deak@intel.com>
Date: Wed Oct 12 17:46:37 2016 +0300
drm/i915/hsw: Fix GPU hang during resume from S3-devices state
but it could happen even without the explicit GPU reset, since we
disable interrupts afterwards during the suspend sequence.
v2:
- Do an unlocked poll-wait first. (Chris)
v3-4:
- s/intel_lr_engines_idle/intel_execlists_idle/ and move
i915.enable_execlists check to the new helper. (Chris)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98470
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1478510405-11799-3-git-send-email-imre.deak@intel.com
Move the actual emission of the breadcrumb for closing the request from
i915_add_request() to the submit callback. (It can be moved later when
required.) This allows us to defer the allocation of the global_seqno
from request construction to actual submission, allowing us to emit the
requests out of order (wrt to the order of their construction, they
still will only be executed one all of their dependencies are resolved
including that all earlier requests on their timeline have been
submitted.) We have to specialise how we then emit the request in order
to write into the preallocated space, rather than at the tail of the
ringbuffer (which will have been advanced by the addition of new
requests).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-29-chris@chris-wilson.co.uk
In the next patch, we will use deferred breadcrumb emission. That requires
reserving sufficient space in the ringbuffer to emit the breadcrumb, which
first requires us to know how large the breadcrumb is.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-28-chris@chris-wilson.co.uk
Now that the emission of the request tail and its submission to hardware
are two separate steps, engine->emit_request() is confusing.
engine->emit_request() is called to emit the breadcrumb commands for the
request into the ring, name it such (engine->emit_breadcrumb).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-27-chris@chris-wilson.co.uk
Though we will have multiple timelines, we still have a single timeline
of execution. This we can use to provide an execution and retirement order
of requests. This keeps tracking execution of requests simple, and vital
for preserving a single waiter (i.e. so that we can order the waiters so
that only the earliest to wakeup need be woken). To accomplish this we
distinguish the seqno used to order requests per-context (external) and
that used internally for execution.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-26-chris@chris-wilson.co.uk
The plan is to make obtaining the backing storage for the object avoid
struct_mutex (i.e. use its own locking). The first step is to update the
API so that normal users only call pin/unpin whilst working on the
backing storage.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-12-chris@chris-wilson.co.uk
The golden render state is constant, but we recreate the batch setting
it up for every new context. If we keep that batch in a volatile cache
we can safely reuse it whenever we need to initialise a new context. We
mark the pages as purgeable and use the shrinker to recover pages from
the batch whenever we face memory pressues, recreating that batch afresh
on the next new context.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtien@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-8-chris@chris-wilson.co.uk
With the possibility of addition of many more number of rings in future,
the drm_i915_private structure could bloat as an array, of type
intel_engine_cs, is embedded inside it.
struct intel_engine_cs engine[I915_NUM_ENGINES];
Though this is still fine as generally there is only a single instance of
drm_i915_private structure used, but not all of the possible rings would be
enabled or active on most of the platforms. Some memory can be saved by
allocating intel_engine_cs structure only for the enabled/active engines.
Currently the engine/ring ID is kept static and dev_priv->engine[] is simply
indexed using the enums defined in intel_engine_id.
To save memory and continue using the static engine/ring IDs, 'engine' is
defined as an array of pointers.
struct intel_engine_cs *engine[I915_NUM_ENGINES];
dev_priv->engine[engine_ID] will be NULL for disabled engine instances.
There is a text size reduction of 928 bytes, from 1028200 to 1027272, for
i915.o file (but for i915.ko file text size remain same as 1193131 bytes).
v2:
- Remove the engine iterator field added in drm_i915_private structure,
instead pass a local iterator variable to the for_each_engine**
macros. (Chris)
- Do away with intel_engine_initialized() and instead directly use the
NULL pointer check on engine pointer. (Chris)
v3:
- Remove for_each_engine_id() macro, as the updated macro for_each_engine()
can be used in place of it. (Chris)
- Protect the access to Render engine Fault register with a NULL check, as
engine specific init is done later in Driver load sequence.
v4:
- Use !!dev_priv->engine[VCS] style for the engine check in getparam. (Chris)
- Kill the superfluous init_engine_lists().
v5:
- Cleanup the intel_engines_init() & intel_engines_setup(), with respect to
allocation of intel_engine_cs structure. (Chris)
v6:
- Rebase.
v7:
- Optimize the for_each_engine_masked() macro. (Chris)
- Change the type of 'iter' local variable to enum intel_engine_id. (Chris)
- Rebase.
v8: Rebase.
v9: Rebase.
v10:
- For index calculation use engine ID instead of pointer based arithmetic in
intel_engine_sync_index() as engine pointers are not contiguous now (Chris)
- For appropriateness, rename local enum variable 'iter' to 'id'. (Joonas)
- Use for_each_engine macro for cleanup in intel_engines_init() and remove
check for NULL engine pointer in cleanup() routines. (Joonas)
v11: Rebase.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Akash Goel <akash.goel@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1476378888-7372-1-git-send-email-akash.goel@intel.com
Along with the interrupt, we want to restore the fake-irq and
wait-timeout detection. If we use the breadcrumbs interface to setup the
interrupt as it wants, the auxiliary timers will also be restored.
v2: Cancel both timers as well, sanitize the IMR.
Fixes: 821ed7df6e ("drm/i915: Update reset path to fix incomplete requests")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161007065327.24515-3-chris@chris-wilson.co.uk
After a GPU reset, we want to replay our queue of requests. However, the
GPU reset clobbered the state and we only fixup the state for the guilty
request - and engines deemed innocent we try to leave untouched so that
we recover as completely as possible. However, we need to clear the sw
tracking of the ELSP ports even for innocent requests, so move the clear
to the common path of init_hw (from reset_hw).
Reported-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161004201132.21801-3-chris@chris-wilson.co.uk
On Braswell, at least, we observe that the context image is written in
multiple phases. The first phase is to clear the register state, and
subsequently rewrite it. A GPU reset at the right moment can interrupt
the context update leaving it corrupt, and our update of the RING_HEAD
is not sufficient to restart the engine afterwards. To recover, we need
to reset the registers back to their original values. The context state
is lost. What we need is a better mechanism to serialise the reset with
pending flushes from the GPU.
Fixes: 821ed7df6e ("drm/i915: Update reset path to fix incomplete requests")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161004201132.21801-2-chris@chris-wilson.co.uk
Since both legacy and execlists want to populate the RING_CTL register,
share the computation of the right bits for the ring->size. We can then
stop masking errors and explicitly forbid them during creation!
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161004201132.21801-1-chris@chris-wilson.co.uk
There is a disparity in the context image saved to disk and our own
bookkeeping - that is we presume the RING_HEAD and RING_TAIL match our
stored ce->ring->tail value. However, as we emit WA_TAIL_DWORDS into the
ring but may not tell the GPU about them, the GPU may be lagging behind
our bookkeeping. Upon hibernation we do not save stolen pages, presuming
that their contents are volatile. This means that although we start
writing into the ring at tail, the GPU starts executing from its HEAD
and there may be some garbage in between and so the GPU promptly hangs
upon resume.
Testcase: igt/gem_exec_suspend/basic-S4
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96526
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160921135108.29574-3-chris@chris-wilson.co.uk
Drive final request submission from a callback from the fence. This way
the request is queued until all dependencies are resolved, at which
point it is handed to the backend for queueing to hardware. At this
point, no dependencies are set on the request, so the callback is
immediate.
A side-effect of imposing a heavier-irqsafe spinlock for execlist
submission is that we lose the softirq enabling after scheduling the
execlists tasklet. To compensate, we manually kickstart the softirq by
disabling and enabling the bh around the fence signaling.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: John Harrison <john.c.harrison@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160909131201.16673-14-chris@chris-wilson.co.uk
Update reset path in preparation for engine reset which requires
identification of incomplete requests and associated context and fixing
their state so that engine can resume correctly after reset.
The request that caused the hang will be skipped and head is reset to the
start of breadcrumb. This allows us to resume from where we left-off.
Since this request didn't complete normally we also need to cleanup elsp
queue manually. This is vital if we employ nonblocking request
submission where we may have a web of dependencies upon the hung request
and so advancing the seqno manually is no longer trivial.
ABI: gem_reset_stats / DRM_IOCTL_I915_GET_RESET_STATS
We change the way we count pending batches. Only the active context
involved in the reset is marked as either innocent or guilty, and not
mark the entire world as pending. By inspection this only affects
igt/gem_reset_stats (which assumes implementation details) and not
piglit.
ARB_robustness gives this guide on how we expect the user of this
interface to behave:
* Provide a mechanism for an OpenGL application to learn about
graphics resets that affect the context. When a graphics reset
occurs, the OpenGL context becomes unusable and the application
must create a new context to continue operation. Detecting a
graphics reset happens through an inexpensive query.
And with regards to the actual meaning of the reset values:
Certain events can result in a reset of the GL context. Such a reset
causes all context state to be lost. Recovery from such events
requires recreation of all objects in the affected context. The
current status of the graphics reset state is returned by
enum GetGraphicsResetStatusARB();
The symbolic constant returned indicates if the GL context has been
in a reset state at any point since the last call to
GetGraphicsResetStatusARB. NO_ERROR indicates that the GL context
has not been in a reset state since the last call.
GUILTY_CONTEXT_RESET_ARB indicates that a reset has been detected
that is attributable to the current GL context.
INNOCENT_CONTEXT_RESET_ARB indicates a reset has been detected that
is not attributable to the current GL context.
UNKNOWN_CONTEXT_RESET_ARB indicates a detected graphics reset whose
cause is unknown.
The language here is explicit in that we must mark up the guilty batch,
but is loose enough for us to relax the innocent (i.e. pending)
accounting as only the active batches are involved with the reset.
In the future, we are looking towards single engine resetting (with
minimal locking), where it seems inappropriate to mark the entire world
as innocent since the reset occurred on a different engine. Reducing the
information available means we only have to encounter the pain once, and
also reduces the information leaking from one context to another.
v2: Legacy ringbuffer submission required a reset following hibernation,
or else we restore stale values to the RING_HEAD and walked over
stolen garbage.
v3: GuC requires replaying the requests after a reset.
v4: Restore engine IRQ after reset (so waiters will be woken!)
Rearm hangcheck if resetting with a waiter.
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Arun Siluvery <arun.siluvery@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160909131201.16673-13-chris@chris-wilson.co.uk
Emulate HW to track and manage ELSP queue. A set of SW ports are defined
and requests are assigned to these ports before submitting them to HW. This
helps in cleaning up incomplete requests during reset recovery easier
especially after engine reset by decoupling elsp queue management. This
will become more clear in the next patch.
In the engine reset case we want to resume where we left-off after skipping
the incomplete batch which requires checking the elsp queue, removing
element and fixing elsp_submitted counts in some cases. Instead of directly
manipulating the elsp queue from reset path we can examine these ports, fix
up ringbuffer pointers using the incomplete request and restart submissions
again after reset.
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Arun Siluvery <arun.siluvery@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1470414607-32453-3-git-send-email-arun.siluvery@linux.intel.com
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160909131201.16673-6-chris@chris-wilson.co.uk
Similar to the issue with reading from the context status buffer,
see commit 26720ab97f ("drm/i915: Move CSB MMIO reads out of the
execlists lock"), we frequently write to the ELSP register (4 writes per
interrupt) and know we hold the required spinlock and forcewake throughout.
We can further reduce the cost of writing these registers beyond the
I915_WRITE_FW() by precomputing the address of the ELSP register. We also
note that the subsequent read serves no purpose here, and are happy to
see it go.
v2: Address I915_WRITE mistakes in changelog
text data bss dec hex filename
1259784 4581 576 1264941 134d2d drivers/gpu/drm/i915/i915.ko
1259720 4581 576 1264877 134ced drivers/gpu/drm/i915/i915.ko
Saves 64 bytes of address recomputation.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160909131201.16673-4-chris@chris-wilson.co.uk
Leave the more complicated request dequeueing to the tasklet and instead
just kick start the tasklet if we detect we are adding the first
request.
v2: Play around with list operators until we agree upon something
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160909131201.16673-2-chris@chris-wilson.co.uk
In an upcoming patch we'll need the actual mask of subslices in addition
to their count, so convert the subslice_per_slice field to a mask.
Also we can easily calculate subslice_total from the other fields, so
instead of storing a cached version of this, add a helper to calculate
it.
v2:
- Use hweight8() on u8 typed vars instead of hweight32(). (Ben)
Reviewed-by: Robert Bragg <robert@sixbynine.org> (v1)
Reviewed-by: Ben Widawsky <benjamin.widawsky@intel.com> (v1)
Tested-by: Ben Widawsky <benjamin.widawsky@intel.com> (v1)
Signed-off-by: Imre Deak <imre.deak@intel.com>
In an upcoming patch we'll need the actual mask of slices in addition to
their count, so replace the count field with a mask.
v2:
- Use hweight8() on u8 typed vars instead of hweight32(). (Ben)
Reviewed-by: Robert Bragg <robert@sixbynine.org> (v1)
Reviewed-by: Ben Widawsky <benjamin.widawsky@intel.com> (v1)
Tested-by: Ben Widawsky <benjamin.widawsky@intel.com> (v1)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1472659987-10417-5-git-send-email-imre.deak@intel.com
Move all slice/subslice/eu related properties to the sseu_dev_info
struct.
No functional change.
v2:
- s/info/sseu/ based on the new struct name. (Ben)
Reviewed-by: Robert Bragg <robert@sixbynine.org> (v1)
Reviewed-by: Ben Widawsky <benjamin.widawsky@intel.com> (v1)
Tested-by: Ben Widawsky <benjamin.widawsky@intel.com> (v1)
Signed-off-by: Imre Deak <imre.deak@intel.com>
This little helper only exists to safely discard the upper unused 32bits
of the general 64-bit VMA address - as we know that all Global GTT
currently are less than 4GiB in size and so that the upper bits must be
zero. In many places, we use a u32 for the global GTT offset and we want
to document where we are discarding the full VMA offset.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1471254551-25805-28-git-send-email-chris@chris-wilson.co.uk
Since the scratch allocation and cleanup is shared by all engine
submission backends, move it out of the legacy intel_ringbuffer.c and
into the new home for common routines, intel_engine_cs.c
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1471254551-25805-20-git-send-email-chris@chris-wilson.co.uk
Use the GGTT VMA as the primary cookie for handing ring objects as
the most common action upon the ring is mapping and unmapping which act
upon the VMA itself. By restructuring the code to work with the ring
VMA, we can shrink the code and remove a few cycles from context pinning.
v2: Move the flush of the object back to before the first pin. We use
the am-I-bound? query to only have to check the flush on the first
bind and so avoid stalling on active rings.
Lots of little renames and small hoops.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1471254551-25805-18-git-send-email-chris@chris-wilson.co.uk
When working with contexts, we most frequently want the GGTT VMA for the
context state, first and foremost. Since the object is available via the
VMA, we need only then store the VMA.
v2: Formatting tweaks to debugfs output, restored some comments removed
in the next patch
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1471254551-25805-15-git-send-email-chris@chris-wilson.co.uk
vmaps has a provision for controlling the page protection bits, with which
we can use to control the mapping type, e.g. WB, WC, UC or even WT.
To allow the caller to choose their mapping type, we add a parameter to
i915_gem_object_pin_map - but we still only allow one vmap to be cached
per object. If the object is currently not pinned, then we recreate the
previous vmap with the new access type, but if it was pinned we report an
error. This effectively limits the access via i915_gem_object_pin_map to a
single mapping type for the lifetime of the object. Not usually a problem,
but something to be aware of when setting up the object's vmap.
We will want to vary the access type to enable WC mappings of ringbuffer
and context objects on !llc platforms, as well as other objects where we
need coherent access to the GPU's pages without going through the GTT
v2: Remove the redundant braces around pin count check and fix the marker
in documentation (Chris)
v3:
- Add a new enum for the vmalloc mapping type & pass that as an argument to
i915_object_pin_map. (Tvrtko)
- Use PAGE_MASK to extract or filter the mapping type info and remove a
superfluous BUG_ON.(Tvrtko)
v4:
- Rename the enums and clean up the pin_map function. (Chris)
v5: Drop the VM_NO_GUARD, minor cosmetics.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Akash Goel <akash.goel@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1471001999-17787-1-git-send-email-chris@chris-wilson.co.uk
We allocate a few objects into the GGTT that we never need to access via
the mappable aperture (such as contexts, status pages). We can request
that these are bound high in the VM to increase the amount of mappable
aperture available. However, anything that may be frequently pinned
(such as logical contexts) we want to use the fast search & insert.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470832906-13972-1-git-send-email-chris@chris-wilson.co.uk
Before suspending (or unloading), we would first wait upon all rendering
to be completed and then disable the rings. This later step is a remanent
from DRI1 days when we did not use request tracking for all operations
upon the ring. Now that we are sure we are waiting upon the very last
operation by the engine, we can forgo clobbering the ring registers,
though we do keep the assert that the engine is indeed idle before
sleeping.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470388464-28458-5-git-send-email-chris@chris-wilson.co.uk
Backmerge the 4.8 pull request state from Dave - conflicts were
getting out of hand, and Chris has some patches which outright don't
apply without everything merged together again.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Since i915_gem_obj_ggtt_pin() is an idiom breaking curry function for
i915_gem_object_ggtt_pin(), spare us the confusion and remove it.
Removing it now simplifies later patches to change the i915_vma_pin()
(and friends) interface.
v2: Add a redundant GEM_BUG_ON(!view) to
i915_gem_obj_lookup_or_create_ggtt_vma()
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470324762-2545-18-git-send-email-chris@chris-wilson.co.uk
Now that we initialize the state to both legacy and execlists inside
intel_engine_cs, we should also clean up that state from the common
functions.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470226756-24401-1-git-send-email-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Space reservation is already safe with respect to the ring->size
modulus, but hardware only expects to see values in the range
0...ring->size-1 (inclusive) and so requires the modulus to prevent us
writing the value ring->size instead of 0. As this is only required for
the register itself, we can defer the modulus to the register update and
not perform it after every command packet. We keep the
intel_ring_advance() around in the code to provide demarcation for the
end-of-packet (which then can be compared against intel_ring_begin() as
the number of dwords emitted must match the reserved space).
v2: Assert that the ring size is a power-of-two to match assumptions in
the code. Simplify the comment before writing the tail value to explain
why the modulus is necessary.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Dave Gordon <david.s.gordon@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470174640-18242-13-git-send-email-chris@chris-wilson.co.uk
Rather than passing a complete set of GPU cache domains for either
invalidation or for flushing, or even both, just pass a single parameter
to the engine->emit_flush to determine the required operations.
engine->emit_flush(GPU, 0) -> engine->emit_flush(EMIT_INVALIDATE)
engine->emit_flush(0, GPU) -> engine->emit_flush(EMIT_FLUSH)
engine->emit_flush(GPU, GPU) -> engine->emit_flush(EMIT_FLUSH | EMIT_INVALIDATE)
This allows us to extend the behaviour easily in future, for example if
we want just a command barrier without the overhead of flushing.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Dave Gordon <david.s.gordon@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470174640-18242-8-git-send-email-chris@chris-wilson.co.uk
Space for flushing the GPU cache prior to completing the request is
preallocated and so cannot fail - the GPU caches will always be flushed
along with the completed request. This means we no longer have to track
whether the GPU cache is dirty between batches like we had to with the
outstanding_lazy_seqno.
With the removal of the duplication in the per-backend entry points for
emitting the obsolete lazy flush, we can then further unify the
engine->emit_flush.
v2: Expand a bit on the legacy of gpu_caches_dirty
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1469432687-22756-18-git-send-email-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470174640-18242-7-git-send-email-chris@chris-wilson.co.uk
The state stored in this struct is not only the information about the
buffer object, but the ring used to communicate with the hardware. Using
buffer here is overly specific and, for me at least, conflates with the
notion of buffer objects themselves.
s/struct intel_ringbuffer/struct intel_ring/
s/enum intel_ring_hangcheck/enum intel_engine_hangcheck/
s/describe_ctx_ringbuf()/describe_ctx_ring()/
s/intel_ring_get_active_head()/intel_engine_get_active_head()/
s/intel_ring_sync_index()/intel_engine_sync_index()/
s/intel_ring_init_seqno()/intel_engine_init_seqno()/
s/ring_stuck()/engine_stuck()/
s/intel_cleanup_engine()/intel_engine_cleanup()/
s/intel_stop_engine()/intel_engine_stop()/
s/intel_pin_and_map_ringbuffer_obj()/intel_pin_and_map_ring()/
s/intel_unpin_ringbuffer()/intel_unpin_ring()/
s/intel_engine_create_ringbuffer()/intel_engine_create_ring()/
s/intel_ring_flush_all_caches()/intel_engine_flush_all_caches()/
s/intel_ring_invalidate_all_caches()/intel_engine_invalidate_all_caches()/
s/intel_ringbuffer_free()/intel_ring_free()/
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1469432687-22756-15-git-send-email-chris@chris-wilson.co.uk
Link: http://patchwork.freedesktop.org/patch/msgid/1470174640-18242-4-git-send-email-chris@chris-wilson.co.uk
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJXlRXSAAoJEHm+PkMAQRiGG/gH/0Z8O4zWOsrwO+X1mRToRDBH
joFOjAmCVe83T1VpF5LYNB+9+owL/dEDt6+ZIswnhH7AfQPjs4RqwS4PcuMbCDVO
+mDm0PmfcKaYcQZrB2Z2OwIzRNnfCTVcsDPhIHwuIHk0m4z/xuGZonD8KoAj0+tO
3yJF6sbE1KubDVjOb+lmZZSP3cXA0pDXrNhkYhE4Tsr8fiihGjeXSNJ8t2zPLjxo
W3MPqo0rzDvQsOwoF4TWHHagVaFSJlhLBBgqu33fI7uO3jtfQD2G8wG68JCND1j3
qbMoBfTLFV/yQmSIJUt0Wv1axaCcwnjpweEB35A/GEeZ0mNB1rDdoBeI1eKEQkc=
=DGFC
-----END PGP SIGNATURE-----
Backmerge tag 'v4.7' into drm-next
Linux 4.7
As requested by Daniel Vetter as the conflicts were getting messy.
Add WaDisableGatherAtSetShaderCommonSlice for all gen9 as stated
by bspec. The bspec told to put this workaround to the per ctx bb.
Initial implementation and subsequent review were done based on
bspec. Arun raised a suspicion that this would belong to indirect bb
instead and he conducted more throughout investigation on the matter
and indeed the documentation was wrong.
v2: Move to indirect_ctx wa bb, as it is correct place (Arun)
References: HSD#2135817
Cc: Arun Siluvery <arun.siluvery@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com> (v1)
Reviewed-by: Arun Siluvery <arun.siluvery@linux.intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1469013973-24104-1-git-send-email-mika.kuoppala@intel.com
dma-buf provides a generic fence class for interoperation between
drivers. Internally we use the request structure as a fence, and so with
only a little bit of interfacing we can rebase those requests on top of
dma-buf fences. This will allow us, in the future, to pass those fences
back to userspace or between drivers.
v2: The fence_context needs to be globally unique, not just unique to
this device.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1469002875-2335-4-git-send-email-chris@chris-wilson.co.uk
Fairly minimal, there's still lots of functions without any docs, and
which aren't static. But probably we want to first clean this up some more.
- Drop the bogus const. Marking argument pointers themselves (instead of
what they point at) as const provides roughly 0 value. And it's confusing,
since the data the pointer points at _is_ being changed.
- Remove kerneldoc for static functions. Keep comments where they seem valuable.
- Indent and whitespace fixes.
- Blockquote the bit field definitions of the descriptor for correct layouting.
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1468612088-9721-9-git-send-email-daniel.vetter@ffwll.ch
Extend the scope of this workaround, already used in skl,
to also take effect in kbl.
v2: Fix KBL_REVID_E0 (Matthew)
References: HSD#2132677
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1465309159-30531-12-git-send-email-mika.kuoppala@intel.com
(cherry picked from commit fe90581987)
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Common code deserves to be put in a separate file from legacy and
execlists implementation for clarity and ease of maintenance.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris-wilson.co.uk>
With the unified common engine setup done, and the execlist engine
initialization loop clearly split into two phases, we can eliminate
the separate legacy engine initialization code.
v2: Fix cleanup path for legacy.
v3: Rename constructors. (Chris Wilson)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Chris Wilson <chris-wilson.co.uk>
Move the execlist engine setup to vfuncs so that the engine
init loop is clearly split into the mode agnostic and
specific steps.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Chris Wilson <chris-wilson.co.uk>
intel_lrc.c has a table of "logical rings" (meaning engines), while
intel_ringbuffer.c has separately open-coded initialisation for each
engine. We can deduplicate this somewhat by using the same first-stage
engine-setup function for both modes.
So here we expose the function that transfers information from the
static table of (all) known engines to the dev_priv->engine array of
engines available on this device (adjusting the names along the way)
and then embed calls to it in both the LRC and the legacy-mode setup.
Signed-off-by: Dave Gordon <david.s.gordon@intel.com>
Reviewed-by: Chris Wilson <chris-wilson.co.uk>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
This patch applies WaMediaPoolStateCmdInWABB which fixes
a problem with the restoration of thread counts on resuming
from RC6.
References: HSD#2137167
Signed-off-by: Tim Gore <tim.gore@intel.com>
Reviewed-by: Arun Siluvery <arun.siluvery@linux.intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1467709290-5941-1-git-send-email-tim.gore@intel.com
Since drm_i915_private is now a subclass of drm_device we do not need to
chase the drm_i915_private->dev backpointer and can instead simply
access drm_i915_private->drm directly.
text data bss dec hex filename
1068757 4565 416 1073738 10624a drivers/gpu/drm/i915/i915.ko
1066949 4565 416 1071930 105b3a drivers/gpu/drm/i915/i915.ko
Created by the coccinelle script:
@@
struct drm_i915_private *d;
identifier i;
@@
(
- d->dev->i
+ d->drm.i
|
- d->dev
+ &d->drm
)
and for good measure the dev_priv->dev backpointer was removed entirely.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1467711623-2905-4-git-send-email-chris@chris-wilson.co.uk
Since we now subclass struct drm_device, we can save pointer dances by
noting the equivalence of struct drm_device and struct drm_i915_private,
i.e. by using to_i915().
text data bss dec hex filename
1073824 4562 416 1078802 107612 drivers/gpu/drm/i915/i915.ko
1068976 4562 416 1073954 106322 drivers/gpu/drm/i915/i915.ko
Created by the coccinelle script:
@@
expression E;
identifier p;
@@
- struct drm_i915_private *p = E->dev_private;
+ struct drm_i915_private *p = to_i915(E);
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Dave Gordon <david.s.gordon@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1467628477-25379-1-git-send-email-chris@chris-wilson.co.uk
Now that we have (near) universal GPU recovery code, we can inject a
real hang from userspace and not need any fakery. Not only does this
mean that the testing is far more realistic, but we can simplify the
kernel in the process.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Arun Siluvery <arun.siluvery@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1467616119-4093-7-git-send-email-chris@chris-wilson.co.uk
With only a single callsite for intel_engine_cs->irq_get and ->irq_put,
we can reduce the code size by moving the common preamble into the
caller, and we can also eliminate the reference counting.
For completeness, as we are no longer doing reference counting on irq,
rename the get/put vfunctions to enable/disable respectively and are
able to review the use of posting reads. We only require the
serialisation with hardware when enabling the interrupt (i.e. so we
cannot miss an interrupt by going to sleep before the hardware truly
enables it).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1467390209-3576-18-git-send-email-chris@chris-wilson.co.uk
By using the same address for storing the HWS on every platform, we can
remove the platform specific vfuncs and reduce the get-seqno routine to
a single read of a cached memory location.
v2: Fix semaphore_passed() to look at the signaling engine (not the
waiter's)
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1467390209-3576-8-git-send-email-chris@chris-wilson.co.uk
One particularly stressful scenario consists of many independent tasks
all competing for GPU time and waiting upon the results (e.g. realtime
transcoding of many, many streams). One bottleneck in particular is that
each client waits on its own results, but every client is woken up after
every batchbuffer - hence the thunder of hooves as then every client must
do its heavyweight dance to read a coherent seqno to see if it is the
lucky one.
Ideally, we only want one client to wake up after the interrupt and
check its request for completion. Since the requests must retire in
order, we can select the first client on the oldest request to be woken.
Once that client has completed his wait, we can then wake up the
next client and so on. However, all clients then incur latency as every
process in the chain may be delayed for scheduling - this may also then
cause some priority inversion. To reduce the latency, when a client
is added or removed from the list, we scan the tree for completed
seqno and wake up all the completed waiters in parallel.
Using igt/benchmarks/gem_latency, we can demonstrate this effect. The
benchmark measures the number of GPU cycles between completion of a
batch and the client waking up from a call to wait-ioctl. With many
concurrent waiters, with each on a different request, we observe that
the wakeup latency before the patch scales nearly linearly with the
number of waiters (before external factors kick in making the scaling much
worse). After applying the patch, we can see that only the single waiter
for the request is being woken up, providing a constant wakeup latency
for every operation. However, the situation is not quite as rosy for
many waiters on the same request, though to the best of my knowledge this
is much less likely in practice. Here, we can observe that the
concurrent waiters incur extra latency from being woken up by the
solitary bottom-half, rather than directly by the interrupt. This
appears to be scheduler induced (having discounted adverse effects from
having a rbtree walk/erase in the wakeup path), each additional
wake_up_process() costs approximately 1us on big core. Another effect of
performing the secondary wakeups from the first bottom-half is the
incurred delay this imposes on high priority threads - rather than
immediately returning to userspace and leaving the interrupt handler to
wake the others.
To offset the delay incurred with additional waiters on a request, we
could use a hybrid scheme that did a quick read in the interrupt handler
and dequeued all the completed waiters (incurring the overhead in the
interrupt handler, not the best plan either as we then incur GPU
submission latency) but we would still have to wake up the bottom-half
every time to do the heavyweight slow read. Or we could only kick the
waiters on the seqno with the same priority as the current task (i.e. in
the realtime waiter scenario, only it is woken up immediately by the
interrupt and simply queues the next waiter before returning to userspace,
minimising its delay at the expense of the chain, and also reducing
contention on its scheduler runqueue). This is effective at avoid long
pauses in the interrupt handler and at avoiding the extra latency in
realtime/high-priority waiters.
v2: Convert from a kworker per engine into a dedicated kthread for the
bottom-half.
v3: Rename request members and tweak comments.
v4: Use a per-engine spinlock in the breadcrumbs bottom-half.
v5: Fix race in locklessly checking waiter status and kicking the task on
adding a new waiter.
v6: Fix deciding when to force the timer to hide missing interrupts.
v7: Move the bottom-half from the kthread to the first client process.
v8: Reword a few comments
v9: Break the busy loop when the interrupt is unmasked or has fired.
v10: Comments, unnecessary churn, better debugging from Tvrtko
v11: Wake all completed waiters on removing the current bottom-half to
reduce the latency of waking up a herd of clients all waiting on the
same request.
v12: Rearrange missed-interrupt fault injection so that it works with
igt/drv_missed_irq_hang
v13: Rename intel_breadcrumb and friends to intel_wait in preparation
for signal handling.
v14: RCU commentary, assert_spin_locked
v15: Hide BUG_ON behind the compiler; report on gem_latency findings.
v16: Sort seqno-groups by priority so that first-waiter has the highest
task priority (and so avoid priority inversion).
v17: Add waiters to post-mortem GPU hang state.
v18: Return early for a completed wait after acquiring the spinlock.
Avoids adding ourselves to the tree if the is already complete, and
skips the awkward question of why we don't do completion wakeups for
waits earlier than or equal to ourselves.
v19: Prepare for init_breadcrumbs to fail. Later patches may want to
allocate during init, so be prepared to propagate back the error code.
Testcase: igt/gem_concurrent_blit
Testcase: igt/benchmarks/gem_latency
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: "Rogozhkin, Dmitry V" <dmitry.v.rogozhkin@intel.com>
Cc: "Gong, Zhipeng" <zhipeng.gong@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Dave Gordon <david.s.gordon@intel.com>
Cc: "Goel, Akash" <akash.goel@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> #v18
Link: http://patchwork.freedesktop.org/patch/msgid/1467390209-3576-6-git-send-email-chris@chris-wilson.co.uk
By using the out-of-line intel_wait_for_register() not only do we can
efficiency from using the hybrid wait_for() contained within, but we
avoid code bloat from the numerous inlined loops, in total (all patches):
text data bss dec hex filename
1078551 4557 416 1083524 108884 drivers/gpu/drm/i915/i915.ko
1070775 4557 416 1075748 106a24 drivers/gpu/drm/i915/i915.ko
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1467297225-21379-40-git-send-email-chris@chris-wilson.co.uk
Effectively removes one layer of indirection between the mask of
possible engines and the engine constructors. Instead of spelling
out in code the mapping of HAS_<engine> to constructors, makes
more use of the recently added data driven approach by putting
engine constructor vfuncs into the table as well.
Effect is fewer lines of source and smaller binary.
At the same time simplify the error handling since engine
destructors can run on unitialized engines anyway.
Similar approach could be done for legacy submission is wanted.
v2: Removed ugly BUILD_BUG_ONs in favour of newly introduced
ENGINE_MASK and HAS_ENGINE macros.
Also removed the forward declarations by shuffling functions
around.
v3: Warn when logical_rings table does not contain enough data
and disable the engines which could not be initialized.
(Chris Wilson)
v4: Chris Wilson suggested a nicer engine init loop.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1466689961-23232-1-git-send-email-tvrtko.ursulin@linux.intel.com
This patch introduces the support of LRC context single submission.
As GVT context may come from different guests, which require different
configuration of render registers. It can't be combined into a dual ELSP
submission combo.
Only GVT-g will create this kinds of GEM context currently.
v8:
- Rename the data member in struct i915_gem_context. (Chris)
v7:
- Fix typos in commit message. (Joonas)
v6:
- Make GVT code as dead code when !CONFIG_DRM_I915_GVT. (Chris)
v5:
- Only compile this feature when CONFIG_DRM_I915_GVT=y. (Tvrtko)
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1466078825-6662-9-git-send-email-zhi.a.wang@intel.com
This patch introduces an approach to track the execlist context status
change.
GVT-g uses GVT context as the "shadow context". The content inside GVT
context will be copied back to guest after the context is idle. And GVT-g
has to know the status of the execlist context.
This function is configurable when creating a new GEM context. Currently,
Only GVT-g will create the "status-change-notification" enabled GEM
context.
v10:
- Fix the identation. (Joonas)
v8:
- Remove the boolean flag in struct i915_gem_context. (Joonas)
v7:
- Remove per-engine ctx status notifiers. Use one status notifier for all
engines. (Joonas)
- Add prefix "INTEL_" for related definitions. (Joonas)
- Refine the comments in execlists_context_status_change(). (Joonas)
v6:
- When !CONFIG_DRM_I915_GVT, make GVT code as dead code then compiler
could automatically eliminate them for us. (Chris)
- Always initialize the notifier header, so it could be switched on/off
at runtime. (Chris)
v5:
- Only compile this feature when CONFIG_DRM_I915_GVT is enabled.(Tvrtko)
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> (v8)
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1466078825-6662-8-git-send-email-zhi.a.wang@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Currently the addressing mode bit in context descriptor is statically
generated from the configuration of system-wide PPGTT usage model.
GVT-g will load the PPGTT shadow page table by itself and probably one
guest is using a different addressing mode with i915 host. The addressing
mode bits of a LRC context should be configurable under this case.
v10:
- Fix the identation. (Joonas)
v9:
- Rename the data member in struct i915_gem_context. (Chris)
v8:
- Rename the data member in struct i915_gem_context. (Chris)
v7:
- Move context addressing mode bit into i915_reg.h. (Joonas/Chris)
- Add prefix "INTEL_" for related definitions. (Joonas)
v6:
- Directly save the addressing mode bits inside i915_gem_context. (Chris)
- Move the LRC context addressing mode bits into intel_lrc.h. (Chris)
v5:
- Change USES_FULL_48BIT(dev) to USES_FULL_48BIT(dev_priv) (Tvrtko)
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> (v9)
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1466078825-6662-7-git-send-email-zhi.a.wang@intel.com
This patch introduces an option for configuring the ring buffer size
of a LRC context after the context creation.
v9:
- Fix an identation issue. (Chris)
v8:
- Rename the data member in i915_gem_context. (Chris)
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1466078825-6662-6-git-send-email-zhi.a.wang@intel.com
This reverts the following patches:
d55dbd06bb drm/i915: Allow nonblocking update of pageflips.
15c86bdb76 drm/i915: Check for unpin correctness.
95c2ccdc82 Reapply "drm/i915: Avoid stalling on pending flips for legacy cursor updates"
a6747b7304 drm/i915: Make unpin async.
03f476e1fc drm/i915: Prepare connectors for nonblocking checks.
2099deffef drm/i915: Pass atomic states to fbc update functions.
ee7171af72 drm/i915: Remove reset_counter from intel_crtc.
2ee004f7c5 drm/i915: Remove queue_flip pointer.
b8d2afae55 drm/i915: Remove use_mmio_flip kernel parameter.
8dd634d922 drm/i915: Remove cs based page flip support.
143f73b3bf drm/i915: Rework intel_crtc_page_flip to be almost atomic, v3.
84fc494b64 drm/i915: Add the exclusive fence to plane_state.
6885843ae1 drm/i915: Convert flip_work to a list.
aa420ddd8e drm/i915: Allow mmio updates on all platforms, v2.
afee4d8707 Revert "drm/i915: Avoid stalling on pending flips for legacy cursor updates"
"drm/i915: Allow nonblocking update of pageflips" should have been
split up, misses a proper commit message and seems to cause issues in
the legacy page_flip path as demonstrated by kms_flip.
"drm/i915: Make unpin async" doesn't handle the unthrottled cursor
updates correctly, leading to an apparent pin count leak. This is
caught by the WARN_ON in i915_gem_object_do_pin which screams if we
have more than DRM_I915_GEM_OBJECT_MAX_PIN_COUNT pins.
Unfortuantely we can't just revert these two because this patch series
came with a built-in bisect breakage in the form of temporarily
removing the unthrottled cursor update hack for legacy cursor ioctl.
Therefore there's no other option than to revert the entire pile :(
There's one tiny conflict in intel_drv.h due to other patches, nothing
serious.
Normally I'd wait a bit longer with doing a maintainer revert, but
since the minimal set of patches we need to revert (due to the bisect
breakage) is so big, time is running out fast. And very soon
(especially after a few attempts at fixing issues) it'll be really
hard to revert things cleanly.
Lessons learned:
- Not a good idea to rush the review (done by someone fairly new to
the area) and not make sure domain experts had a chance to read it.
- Patches should be properly split up. I only looked at the two
patches that should be reverted in detail, but both look like the
mix up different things in one patch.
- Patches really should have proper commit messages. Especially when
doing more than one thing, and especially when touching critical and
tricky core code.
- Building a patch series and r-b stamping it when it has a built-in
bisect breakage is not a good idea.
- I also think we need to stop building up technical debt by
postponing atomic igt testcases even longer. I think it's clear that
there's enough corner cases in this beast that we really need to
have the testcases _before_ the next step lands.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Patrik Jakobsson <patrik.jakobsson@linux.intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Dave Airlie <airlied@redhat.com>
Acked-by: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
struct intel_context contains two substructs, one for the legacy RCS and
one for every execlists engine. Since legacy RCS is a subset of the
execlists engine support, just combine the two substructs.
v2: Only pin the default context for legacy mode (the object only exists
for legacy, but adding i915.enable_execlists provides symmetry with the
cleanup functions).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1464098023-3294-8-git-send-email-chris@chris-wilson.co.uk
We want to give a name to the currently anonymous per-engine struct
inside the context, so that we can assign it to a local variable and
save clumsy typing. The name we have chosen is intel_context as it
reflects the HW facing portion of the context state (the logical context
state, the registers, the ringbuffer etc).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Dave Gordon <david.s.gordon@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1464098023-3294-4-git-send-email-chris@chris-wilson.co.uk
Our goal is to rename the anonymous per-engine struct beneath the
current intel_context. However, after a lively debate resolving around
the confusion between intel_context_engine and intel_engine_context, the
realisation is that the two structs target different users. The outer
struct is API / user facing, and so carries the higher level GEM
information. The inner struct is hw facing. Thus we want to name the
inner struct intel_context and the outer one i915_gem_context. As the
first step, we need to rename the current struct:
s/struct intel_context/struct i915_gem_context/
which fits much better with its constructors already conveying the
i915_gem_context prefix!
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Dave Gordon <david.s.gordon@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1464098023-3294-1-git-send-email-chris@chris-wilson.co.uk
The knowledge of how to derive the relevant client from the request
should be localised within i915_guc_submission.c; the LRC code shouldn't
have to know about the internal details of the GuC submission process.
And all the information the GuC code needs should be encapsulated in (or
reachable from) the request.
v2:
GEM_BUG_ON() for bad GuC client (Tvrtko Ursulin).
Add/update kerneldoc explaining check_space/submit protocol
Signed-off-by: Dave Gordon <david.s.gordon@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Combine the near identical implementations of intel_logical_ring_begin()
and intel_ring_begin() - the only difference is that the logical wait
has to check for a matching ring (which is assumed by legacy).
In the process some debug messages are culled as there were following a
WARN if we hit an actual error.
v2: Updated commentary
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1461833819-3991-12-git-send-email-chris@chris-wilson.co.uk
(cherry picked from commit 987046ad65)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
text data bss dec hex filename
6309351 3578714 696320 10584385 a18141 vmlinux
6308391 3578714 696320 10583425 a17d81 vmlinux
Almost 1KiB of code reduction.
v2: More s/INTEL_INFO()->gen/INTEL_GEN()/ and IS_GENx() conversions
text data bss dec hex filename
6304579 3578778 696320 10579677 a16edd vmlinux
6303427 3578778 696320 10578525 a16a5d vmlinux
Now over 1KiB!
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1462545621-30125-3-git-send-email-chris@chris-wilson.co.uk
Move all of the constant assignments up front and into a common
function. This is primarily to ensure the backpointers are set as early
as possible for later use during initialisation.
v2: Use a constant struct so that all the similar values are set
together.
v3: Sanitize the engine's IMR to disable any potential interrupt before
we are ready (enabled in init_hw).
v4: Ignore the engine's IMR, to be resolved later
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Dave Gordon <david.s.gordon@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1462545621-30125-2-git-send-email-chris@chris-wilson.co.uk
For legacy ringbuffer mode, we need the new ordered breadcrumb emission
tried and tested on execlists in order to avoid the dreaded "missed
interrupt" syndrome. A secondary advantage of the execlists method is
that it writes to an arbitrary address, useful if one wants to write a
breadcrumb elsewhere.
This fix is taken from commit 7c17d37737 (drm/i915: Use ordered seqno
write interrupt generation on gen8+ execlists).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1461932305-14637-1-git-send-email-chris@chris-wilson.co.uk
At the start of request emission, we flush some space for the request,
estimating the typical size for the request body. The common tail is now
much larger than the typical body, so we can shrink the flush
substantially.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1461917226-9132-3-git-send-email-chris@chris-wilson.co.uk
With the previous patch having extended the pinned lifetime of
contexts by referencing the previous context from the current
request until the latter is retired (completed by the GPU),
we can now remove usage of execlist retired queue entirely.
This is because the above now guarantees that all execlist
object access requirements are satisfied by this new tracking,
and we can stop taking additional references and stop keeping
request on the execlists retired queue.
The latter was a source of significant scalability issues in
the driver causing performance hits on some tests. Most
dramatical of which was igt/gem_close_race which had run time
in tens of minutes which is now reduced to tens of seconds.
Signed-off-by: Tvrtko Ursulin <tvrtko@ursulin.net>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1461833819-3991-24-git-send-email-chris@chris-wilson.co.uk
As the contexts are accessed by the hardware until the switch is completed
to a new context, the hardware may still be writing to the context object
after the breadcrumb is visible. We must not unpin/unbind/prune that
object whilst still active and so we keep the previous context pinned until
the following request. We can generalise the tracking we already do via
the engine->last_context and move it to the request so that it works
equally for execlists and GuC.
v2: Drop the execlists double pin as that exposes a race inside the lrc
irq handler as it tries to access the context after it may be retired.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1461833819-3991-22-git-send-email-chris@chris-wilson.co.uk
Refactor pinning and unpinning of contexts, such that the default
context for an engine is pinned during initialisation and unpinned
during teardown (pinning of the context handles the reference counting).
Thus we can eliminate the special case handling of the default context
that was required to mask that it was not being pinned normally.
v2: Rebalance context_queue after rebasing.
v3: Rebase to -nightly (not 40 patches in)
v4: Rebase onto request_alloc unwinding
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1461833819-3991-19-git-send-email-chris@chris-wilson.co.uk
Rather than being interrupted when we run out of space halfway through
the request, and having to restart from the beginning (and returning to
userspace), flush a little more free space when we prepare the request.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1461833819-3991-15-git-send-email-chris@chris-wilson.co.uk
In the next patches, we want to move the work out of freeing the request
and into its retirement (so that we can free the request without
requiring the struct_mutex). This means that we cannot rely on
unreferencing the request to completely teardown the request any more
and so we need to manually unwind the failed allocation. In doing so, we
reorder the allocation in order to make the unwind simple (and ensure
that we don't try to unwind a partial request that may have modified
global state) and so we end up pushing the initial preallocation down
into the engine request initialisation functions where we have the
requisite control over the state of the request.
Moving the initial preallocation into the engine is less than ideal: it
moves logic to handle a specific problem with request handling out of
the common code. On the other hand, it does allow those backends
significantly more flexibility in performing its allocations.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1461833819-3991-14-git-send-email-chris@chris-wilson.co.uk
Now that we share intel_ring_begin(), reserving space for the tail of
the request is identical between legacy/execlists and so the tautology
can be removed. In the process, we move the reserved space tracking
from the ringbuffer on to the request. This is to enable us to reorder
the reserved space allocation in the next patch.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1461833819-3991-13-git-send-email-chris@chris-wilson.co.uk
Combine the near identical implementations of intel_logical_ring_begin()
and intel_ring_begin() - the only difference is that the logical wait
has to check for a matching ring (which is assumed by legacy).
In the process some debug messages are culled as there were following a
WARN if we hit an actual error.
v2: Updated commentary
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1461833819-3991-12-git-send-email-chris@chris-wilson.co.uk
Propagate the real error from drm_gem_object_init(). Note this also
fixes some confusion in the error return from i915_gem_alloc_object...
v2:
(Matthew Auld)
- updated new users of gem_alloc_object from latest drm-nightly
- replaced occurrences of IS_ERR_OR_NULL() with IS_ERR()
v3:
(Joonas Lahtinen)
- fix double "From:" in commit message
- add goto teardown path
v4:
(Matthew Auld)
- rebase with i915_gem_alloc_object name change
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1461587533-8841-1-git-send-email-matthew.auld@intel.com
[Joonas: Removed spurious " = NULL" from _init() function]
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Because having both i915_gem_object_alloc() and i915_gem_alloc_object()
(with different return conventions) is just too confusing!
(i915_gem_object_alloc() is the low-level memory allocator, and remains
unchanged, whereas i915_gem_alloc_object() is a constructor that ALSO
initialises the newly-allocated object.)
Signed-off-by: Dave Gordon <david.s.gordon@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1461348872-4702-1-git-send-email-david.s.gordon@intel.com
Allow for the MOCS to be programmed for all engines.
Currently we program the MOCS when the first render batch
goes through. This works on most platforms but fails on
platforms that do not run a render batch early,
i.e. headless servers. The patch now programs all initialised engines
on init and the RCS is programmed again within the initial batch. This
is done for predictable consistency with regards to the hardware
context.
Hardware context loading sets the values of the MOCS for RCS
and L3CC. Programming them from within the batch makes sure that
the render context is valid, no matter what the previous state of
the saved-context was.
v2: posted correct version to the mailing list.
v3: moved programming to within engine->init_hw() (Chris Wilson)
v4: code formatting and white-space changes. (Chris Wilson)
Testcase: igt/gem_mocs_settings
Signed-off-by: Peter Antoine <peter.antoine@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1460556205-6644-1-git-send-email-chris@chris-wilson.co.uk
Conceptually, each request is a record of a hardware transaction - we
build up a list of pending commands and then either commit them to
hardware, or cancel them. However, whilst building up the list of
pending commands, we may modify state outside of the request and make
references to the pending request. If we do so and then cancel that
request, external objects then point to the deleted request leading to
both graphical and memory corruption.
The easiest example is to consider object/VMA tracking. When we mark an
object as active in a request, we store a pointer to this, the most
recent request, in the object. Then we want to free that object, we wait
for the most recent request to be idle before proceeding (otherwise the
hardware will write to pages now owned by the system, or we will attempt
to read from those pages before the hardware is finished writing). If
the request was cancelled instead, that wait completes immediately. As a
result, all requests must be committed and not cancelled if the external
state is unknown.
All that remains of i915_gem_request_cancel() users are just a couple of
extremely unlikely allocation failures, so remove the API entirely.
A consequence of committing all incomplete requests is that we generate
excess breadcrumbs and fill the ring much more often with dummy work. We
have completely undone the outstanding_last_seqno optimisation.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=93907
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1460565315-7748-16-git-send-email-chris@chris-wilson.co.uk
Reporting -EIO from i915_wait_request() has proven very troublematic
over the years, with numerous hard-to-reproduce bugs cropping up in the
corner case of where a reset occurs and the code wasn't expecting such
an error.
If the we reset the GPU or have detected a hang and wish to reset the
GPU, the request is forcibly complete and the wait broken. Currently, we
report either -EAGAIN or -EIO in order for the caller to retreat and
restart the wait (if appropriate) after dropping and then reacquiring
the struct_mutex (essential to allow the GPU reset to proceed). However,
if we take the view that the request is complete (no further work will
be done on it by the GPU because it is dead and soon to be reset), then
we can proceed with the task at hand and then drop the struct_mutex
allowing the reset to occur. This transfers the burden of checking
whether it is safe to proceed to the caller, which in all but one
instance it is safe - completely eliminating the source of all spurious
-EIO.
Of note, we only have two API entry points where we expect that
userspace can observe an EIO. First is when submitting an execbuf, if
the GPU is terminally wedged, then the operation cannot succeed and an
-EIO is reported. Secondly, existing userspace uses the throttle ioctl
to detect an already wedged GPU before starting using HW acceleration
(or to confirm that the GPU is wedged after an error condition). So if
the GPU is wedged when the user calls throttle, also report -EIO.
v2: Split more carefully the change to i915_wait_request() and assorted
ABI from the reset handling.
v3: Add a couple of WARN_ON(EIO) to the interruptible modesetting code
so that we don't start to leak EIO there in future (and break our hang
resistant modesetting).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1460565315-7748-9-git-send-email-chris@chris-wilson.co.uk
Link: http://patchwork.freedesktop.org/patch/msgid/1460565315-7748-1-git-send-email-chris@chris-wilson.co.uk
As the request is only valid during the same global reset epoch, we can
record the current reset_counter when constructing the request and reuse
it when waiting upon that request in future. This removes a very hairy
atomic check serialised by the struct_mutex at the time of waiting and
allows us to transfer those waits to a central dispatcher for all
waiters and all requests.
PS: With per-engine resets, we obviously cannot assume a global reset
epoch for the requests - a per-engine epoch makes the most sense. The
challenge then is how to handle checking in the waiter for when to break
the wait, as the fine-grained reset may also want to requeue the
request (i.e. the assumption that just because the epoch changes the
request is completed may be broken - or we just avoid breaking that
assumption with the fine-grained resets).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1460565315-7748-7-git-send-email-chris@chris-wilson.co.uk
This is principally a little bit of syntatic sugar to hide the
atomic_read()s throughout the code to retrieve the current reset_counter.
It also provides the other utility functions to check the reset state on the
already read reset_counter, so that (in later patches) we can read it once
and do multiple tests rather than risk the value changing between tests.
v2: Be more strict on converting existing i915_reset_in_progress() over to
the more verbose i915_reset_in_progress_or_wedged().
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1460565315-7748-4-git-send-email-chris@chris-wilson.co.uk
We started to use PIPE_CONTROL to write render ring seqno in order to
combat seqno write vs interrupt generation problems. This was introduced
by commit 7c17d37737 ("drm/i915: Use ordered seqno write interrupt
generation on gen8+ execlists").
On gen8+ size of PIPE_CONTROL with Post Sync Operation should be
6 dwords. When we're using older 5-dword variant it's possible to
observe inconsistent values written by PIPE_CONTROL with Post
Sync Operation from user batches, resulting in rendering corruptions.
v2: Fix BAT failures
v3: Comments on alignment and thrashing high dword of seqno (Chris)
v4: Updated commit msg (Mika)
Testcase: igt/gem_pipe_control_store_loop/*-qword-write
Issue: VIZ-7393
Cc: stable@vger.kernel.org
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Tested-by: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1460469115-26002-1-git-send-email-michal.winiarski@intel.com
We can use the new pin/lazy unpin API for simplicity
and more performance in the execlist submission paths.
v2:
* Fix error handling and convert more users.
* Compact some names for readability.
v3:
* intel_lr_context_free was not unpinning.
* Special case for GPU reset which otherwise unbalances
the HWS object pages pin count by running the engine
initialization only (not destructors).
v4:
* Rebased on top of hws setup/init split.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1460472042-1998-1-git-send-email-tvrtko.ursulin@linux.intel.com
[tursulin: renames: s/hwd/hws/, s/obj_addr/vaddr/]
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Split the hardware status page into setup and initialisation,
where setup means setting up the driver state to support the
engine, and initialization means programming the hardware
with the before set up state.
This way the design matches the design of the engine setup/init
code which is split in the same fashion and it enables the
stages to be used in a balanced fashion (engine setup - hws
setup, engine init - hws init).
This will enable the upcoming improvements to slot in without
any kludges on the GPU reset path.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Rather than blindly waking up all forcewake domains on command
submission, we can teach each engine what is (or are) the correct
one to take.
On platforms with multiple forcewake domains like VLV, CHV, SKL
and BXT, this has the potential of lowering the GPU and CPU
power use and submission latency.
To implement it we add a function named
intel_uncore_forcewake_for_reg whose purpose is to query which
forcewake domains need to be taken to read or write a specific
register with raw mmio accessors.
These enables the execlists engine setup to query which
forcewake domains are relevant per engine on the currently
running platform.
v2:
* Kerneldoc.
* Split from intel_uncore.c macro extraction, WARN_ON,
no warns on old platforms. (Chris Wilson)
v3:
* Single domain per engine, mention all registers,
bi-directional function and a new name, fix handling
of gen6 and gen7 writes. (Chris Wilson)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1460468251-14069-1-git-send-email-tvrtko.ursulin@linux.intel.com
This is to fix a GPU hang seen with mid thread pre-emption
and pooled EUs.
v2. Use IS_BXT_REVID instead of IS_BROXTON and INTEL_REVID
v3. And use correct type for register addresses
Signed-off-by: Tim Gore <tim.gore@intel.com>
Reviewed-by: Arun Siluvery <arun.siluvery@linux.intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1458571049-854-1-git-send-email-tim.gore@intel.com
In order to simplify future patches, extract the
lazy_coherency optimisation our of the engine->get_seqno() vfunc into
its own callback.
v2: Rename the barrier to engine->irq_seqno_barrier to try and better
reflect that the barrier is only required after the user interrupt before
reading the seqno (to ensure that the seqno update lands in time as we
do not have strict seqno-irq ordering on all platforms).
Reviewed-by: Dave Gordon <david.s.gordon@intel.com> [#v2]
v3: Comments for hangcheck paranoia. Mika wanted to keep the extra
barrier inside the hangcheck, just in case. I can argue that it doesn't
provide a barrier against anything, but the side-effects of applying the
barrier may prevent a false declaration of a hung GPU.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Dave Gordon <david.s.gordon@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1460195877-20520-2-git-send-email-chris@chris-wilson.co.uk
Currently for the case where there is enough space at the end of Ring
buffer for accommodating only the base request, the wrapround is done
immediately and as a result the base request gets added at the start
of Ring buffer. But there may not be enough free space at the beginning
to accommodate the base request, as before the wraparound, the wait was
effectively done for the reserved_size free space from the start of
Ring buffer. In such a case there is a potential of Ring buffer overflow,
the instructions at the head of Ring (ACTHD) can get overwritten.
Since the base request can fit in the remaining space, there is no need
to wraparound immediately. The wraparound will anyway happen later when
the reserved part starts getting used.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Akash Goel <akash.goel@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1457688402-10411-1-git-send-email-akash.goel@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@vger.kernel.org
Doing a lot of work in the interrupt handler introduces huge
latencies to the system as a whole.
Most dramatic effect can be seen by running an all engine
stress test like igt/gem_exec_nop/all where, when the kernel
config is lean enough, the whole system can be brought into
multi-second periods of complete non-interactivty. That can
look for example like this:
NMI watchdog: BUG: soft lockup - CPU#0 stuck for 23s! [kworker/u8:3:143]
Modules linked in: [redacted for brevity]
CPU: 0 PID: 143 Comm: kworker/u8:3 Tainted: G U L 4.5.0-160321+ #183
Hardware name: Intel Corporation Broadwell Client platform/WhiteTip Mountain 1
Workqueue: i915 gen6_pm_rps_work [i915]
task: ffff8800aae88000 ti: ffff8800aae90000 task.ti: ffff8800aae90000
RIP: 0010:[<ffffffff8104a3c2>] [<ffffffff8104a3c2>] __do_softirq+0x72/0x1d0
RSP: 0000:ffff88014f403f38 EFLAGS: 00000206
RAX: ffff8800aae94000 RBX: 0000000000000000 RCX: 00000000000006e0
RDX: 0000000000000020 RSI: 0000000004208060 RDI: 0000000000215d80
RBP: ffff88014f403f80 R08: 0000000b1b42c180 R09: 0000000000000022
R10: 0000000000000004 R11: 00000000ffffffff R12: 000000000000a030
R13: 0000000000000082 R14: ffff8800aa4d0080 R15: 0000000000000082
FS: 0000000000000000(0000) GS:ffff88014f400000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fa53b90c000 CR3: 0000000001a0a000 CR4: 00000000001406f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Stack:
042080601b33869f ffff8800aae94000 00000000fffc2678 ffff88010000000a
0000000000000000 000000000000a030 0000000000005302 ffff8800aa4d0080
0000000000000206 ffff88014f403f90 ffffffff8104a716 ffff88014f403fa8
Call Trace:
<IRQ>
[<ffffffff8104a716>] irq_exit+0x86/0x90
[<ffffffff81031e7d>] smp_apic_timer_interrupt+0x3d/0x50
[<ffffffff814f3eac>] apic_timer_interrupt+0x7c/0x90
<EOI>
[<ffffffffa01c5b40>] ? gen8_write64+0x1a0/0x1a0 [i915]
[<ffffffff814f2b39>] ? _raw_spin_unlock_irqrestore+0x9/0x20
[<ffffffffa01c5c44>] gen8_write32+0x104/0x1a0 [i915]
[<ffffffff8132c6a2>] ? n_tty_receive_buf_common+0x372/0xae0
[<ffffffffa017cc9e>] gen6_set_rps_thresholds+0x1be/0x330 [i915]
[<ffffffffa017eaf0>] gen6_set_rps+0x70/0x200 [i915]
[<ffffffffa0185375>] intel_set_rps+0x25/0x30 [i915]
[<ffffffffa01768fd>] gen6_pm_rps_work+0x10d/0x2e0 [i915]
[<ffffffff81063852>] ? finish_task_switch+0x72/0x1c0
[<ffffffff8105ab29>] process_one_work+0x139/0x350
[<ffffffff8105b186>] worker_thread+0x126/0x490
[<ffffffff8105b060>] ? rescuer_thread+0x320/0x320
[<ffffffff8105fa64>] kthread+0xc4/0xe0
[<ffffffff8105f9a0>] ? kthread_create_on_node+0x170/0x170
[<ffffffff814f351f>] ret_from_fork+0x3f/0x70
[<ffffffff8105f9a0>] ? kthread_create_on_node+0x170/0x170
I could not explain, or find a code path, which would explain
a +20 second lockup, but from some instrumentation it was
apparent the interrupts off proportion of time was between
10-25% under heavy load which is quite bad.
When a interrupt "cliff" is reached, which was >~320k irq/s on
my machine, the whole system goes into a terrible state of the
above described multi-second lockups.
By moving the GT interrupt handling to a tasklet in a most
simple way, the problem above disappears completely.
Testing the effect on sytem-wide latencies using
igt/gem_syslatency shows the following before this patch:
gem_syslatency: cycles=1532739, latency mean=416531.829us max=2499237us
gem_syslatency: cycles=1839434, latency mean=1458099.157us max=4998944us
gem_syslatency: cycles=1432570, latency mean=2688.451us max=1201185us
gem_syslatency: cycles=1533543, latency mean=416520.499us max=2498886us
This shows that the unrelated process is experiencing huge
delays in its wake-up latency. After the patch the results
look like this:
gem_syslatency: cycles=808907, latency mean=53.133us max=1640us
gem_syslatency: cycles=862154, latency mean=62.778us max=2117us
gem_syslatency: cycles=856039, latency mean=58.079us max=2123us
gem_syslatency: cycles=841683, latency mean=56.914us max=1667us
Showing a huge improvement in the unrelated process wake-up
latency. It also shows an approximate halving in the number
of total empty batches submitted during the test. This may
not be worrying since the test puts the driver under
a very unrealistic load with ncpu threads doing empty batch
submission to all GPU engines each.
Another benefit compared to the hard-irq handling is that now
work on all engines can be dispatched in parallel since we can
have up to number of CPUs active tasklets. (While previously
a single hard-irq would serially dispatch on one engine after
another.)
More interesting scenario with regards to throughput is
"gem_latency -n 100" which shows 25% better throughput and
CPU usage, and 14% better dispatch latencies.
I did not find any gains or regressions with Synmark2 or
GLbench under light testing. More benchmarking is certainly
required.
v2:
* execlists_lock should be taken as spin_lock_bh when
queuing work from userspace now. (Chris Wilson)
* uncore.lock must be taken with spin_lock_irq when
submitting requests since that now runs from either
softirq or process context.
v3:
* Expanded commit message with more testing data;
* converted missed locking sites to _bh;
* added execlist_lock comment. (Chris Wilson)
v4:
* Mention dispatch parallelism in commit. (Chris Wilson)
* Do not hold uncore.lock over MMIO reads since the block
is already serialised per-engine via the tasklet itself.
(Chris Wilson)
* intel_lrc_irq_handler should be static. (Chris Wilson)
* Cancel/sync the tasklet on GPU reset. (Chris Wilson)
* Document and WARN that tasklet cannot be active/pending
on engine cleanup. (Chris Wilson/Imre Deak)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Imre Deak <imre.deak@intel.com>
Testcase: igt/gem_exec_nop/all
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94350
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1459768316-6670-1-git-send-email-tvrtko.ursulin@linux.intel.com
Having provided for_each_engine_id() for cases where the third (id)
argument is useful, we can now replace all the remaining instances with
a simpler version that takes only two parameters. In many cases, this
also allows the elimination of the local variable used in the iterator
(usually 'i').
v2:
s/dev_priv/(dev_priv__)/ in body of for_each_engine_masked() [Chris Wilson]
Signed-off-by: Dave Gordon <david.s.gordon@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1458757194-17783-2-git-send-email-david.s.gordon@intel.com
Initialize hangcheck struct during driver load. Since we do the same after
recovering from a reset, this is extracted into a helper function.
v2: remove redundant hangcheck init during load as this is done when
engines are initialized (Chris)
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Tomas Elf <tomas.elf@intel.com>
Signed-off-by: Arun Siluvery <arun.siluvery@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1458577619-12006-1-git-send-email-arun.siluvery@linux.intel.com
By reading the CSB (slow MMIO accesses) into a temporary local
buffer we can decrease the duration of holding the execlist
lock.
Main advantage is that during heavy batch buffer submission we
reduce the execlist lock contention, which should decrease the
latency and CPU usage between the submitting userspace process
and interrupt handling.
Downside is that we need to grab and relase the forcewake twice,
but as the below numbers will show this is completely hidden
by the primary gains.
Testing with "gem_latency -n 100" (submit batch buffers with a
hundred nops each) shows more than doubling of the throughput
and more than halving of the dispatch latency, overall latency
and CPU time spend in the submitting process.
Submitting empty batches ("gem_latency -n 0") does not seem
significantly affected by this change with throughput and CPU
time improving by half a percent, and overall latency worsening
by the same amount.
Above tests were done in a hundred runs on a big core Broadwell.
v2:
* Overflow protection to local CSB buffer.
* Use closer dev_priv in execlists_submit_requests. (Chris Wilson)
v3: Rebase.
v4: Added commend about irq needed to be disabled in
execlists_submit_request. (Chris Wilson)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilsno <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1458219586-20452-1-git-send-email-tvrtko.ursulin@linux.intel.com
Where we have a request we can use req->i915 directly instead
of going through the engine and device. Coccinelle script:
@@
function f;
identifier r;
@@
f(..., struct drm_i915_gem_request *r, ...)
{
...
- engine->dev->dev_private
+ r->i915
...
}
@@
struct drm_i915_gem_request *req;
@@
(
req->
- engine->dev->dev_private
+ i915
)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1458219850-21007-1-git-send-email-tvrtko.ursulin@linux.intel.com
Some trivial ones, first pass done with Coccinelle:
@@
@@
(
- I915_NUM_RINGS
+ I915_NUM_ENGINES
|
- intel_ring_flag
+ intel_engine_flag
|
- for_each_ring
+ for_each_engine
|
- i915_gem_request_get_ring
+ i915_gem_request_get_engine
|
- intel_ring_idle
+ intel_engine_idle
|
- i915_gem_reset_ring_status
+ i915_gem_reset_engine_status
|
- i915_gem_reset_ring_cleanup
+ i915_gem_reset_engine_cleanup
|
- init_ring_lists
+ init_engine_lists
)
But that didn't fully work so I cleaned it up with:
for f in *.[hc]; do sed -i -e s/I915_NUM_RINGS/I915_NUM_ENGINES/ $f; done
for f in *.[hc]; do sed -i -e s/i915_gem_request_get_ring/i915_gem_request_get_engine/ $f; done
for f in *.[hc]; do sed -i -e s/intel_ring_flag/intel_engine_flag/ $f; done
for f in *.[hc]; do sed -i -e s/intel_ring_idle/intel_engine_idle/ $f; done
for f in *.[hc]; do sed -i -e s/init_ring_lists/init_engine_lists/ $f; done
for f in *.[hc]; do sed -i -e s/i915_gem_reset_ring_cleanup/i915_gem_reset_engine_cleanup/ $f; done
for f in *.[hc]; do sed -i -e s/i915_gem_reset_ring_status/i915_gem_reset_engine_status/ $f; done
v2: Rebase.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
I do not see that this needs to be done atomically and up to
one second is quite a long time to busy loop.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Assorted changes in the areas of code cleanup, reduction of
invariant conditional in the interrupt handler and lock
contention and MMIO access optimisation.
* Remove needless initialization.
* Improve cache locality by reorganizing code and/or using
branch hints to keep unexpected or error conditions out
of line.
* Favor busy submit path vs. empty queue.
* Less branching in hot-paths.
v2:
* Avoid mmio reads when possible. (Chris Wilson)
* Use natural integer size for csb indices.
* Remove useless return value from execlists_update_context.
* Extract 32-bit ppgtt PDPs update so it is out of line and
shared with two callers.
* Grab forcewake across all mmio operations to ease the
load on uncore lock and use chepear mmio ops.
v3:
* Removed some more pointless u8 data types.
* Removed unused return from execlists_context_queue.
* Commit message updates.
v4:
* Unclumsify the unqueue if statement. (Chris Wilson)
* Hide forcewake from the queuing function. (Chris Wilson)
Version 3 now makes the irq handling code path ~20% smaller on
48-bit PPGTT hardware, and a little bit less elsewhere. Hot
paths are mostly in-line now and hammering on the uncore
spinlock is greatly reduced together with mmio traffic to an
extent.
Benchmarking with "gem_latency -n 100" (keep submitting
batches with 100 nop instruction) shows approximately 4% higher
throughput, 2% less CPU time and 22% smaller latencies. This was
on a big-core while small-cores could benefit even more.
Most likely reason for the improvements are the MMIO
optimization and uncore lock traffic reduction.
One odd result is with "gem_latency -n 0" (dispatching empty
batches) which shows 5% more throughput, 8% less CPU time,
25% better producer and consumer latencies, but 15% higher
dispatch latency which is yet unexplained.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1456505912-22286-1-git-send-email-tvrtko.ursulin@linux.intel.com
Given that the intel_lr_context_pin cannot succeed without the object,
we cannot reach intel_lr_context_unpin() without first allocating that
object - so we can remove the redundant test.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1456485751-15213-1-git-send-email-tvrtko.ursulin@linux.intel.com
The cache line offset for the Indirect CS context (0x21C8) varies from gen
to gen.
v2: Move it into a function (Arun), use MISSING_CASE (Chris)
v3: Rebased (catched by ci bat)
Cc: Arun Siluvery <arun.siluvery@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Arun Siluvery <arun.siluvery@linux.intel.com>
Signed-off-by: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1456223509-6454-1-git-send-email-michel.thierry@intel.com
In GuC mode LRC pinning lifetime depends exclusively on the
request liftime. Since that is terminated by the seqno update
that opens up a race condition between GPU finishing writing
out the context image and the driver unpinning the LRC.
To extend the LRC lifetime we will employ a similar approach
to what legacy ringbuffer submission does.
We will start tracking the last submitted context per engine
and keep it pinned until it is replaced by another one.
Note that the driver unload path is a bit fragile and could
benefit greatly from efforts to unify the legacy and exec
list submission code paths.
At the moment i915_gem_context_fini has special casing for the
two which are potentialy not needed, and also depends on
i915_gem_cleanup_ringbuffer running before itself.
v2:
* Move pinning into engine->emit_request and actually fix
the reference/unreference logic. (Chris Wilson)
* ring->dev can be NULL on driver unload so use a different
route towards it.
v3:
* Rebase.
* Handle the reset path. (Chris Wilson)
* Exclude default context from the pinning - it is impossible
to get it right before default context special casing in
general is eliminated.
v4:
* Rebased & moved context tracking to
intel_logical_ring_advance_and_submit.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Issue: VIZ-4277
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Nick Hoath <nicholas.hoath@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1453976997-25424-1-git-send-email-tvrtko.ursulin@linux.intel.com
Will simplify the following fix and sounds logical.
v2: Add some whitespace to separate logic better. (Chris Wilson)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Nick Hoath <nicholas.hoath@intel.com>
Previously intel_lr_context_(un)pin were operating on requests
which is in conflict with their names.
If we make them take a context and an engine, it makes the names
make more sense and it also makes future fixes possible.
v2: Rebase for default_context/kernel_context change.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Nick Hoath <nicholas.hoath@intel.com>
Previously GuC uses ring id as engine id because of same definition.
But this is not true since this commit:
commit de1add3605
Author: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Date: Fri Jan 15 15:12:50 2016 +0000
drm/i915: Decouple execbuf uAPI from internal implementation
Added GuC engine id into GuC interface to decouple it from ring id used
by driver.
v2: Keep ring name print out in debugfs; using for_each_ring() where
possible to keep driver consistent. (Chris W.)
Signed-off-by: Alex Dai <yu.dai@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1453579094-29860-1-git-send-email-yu.dai@intel.com
Since:
commit 82352e908a
Author: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Date: Fri Jan 15 17:12:45 2016 +0000
drm/i915: Cache LRC state page in the context
and:
commit 0eb973d31d
Author: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Date: Fri Jan 15 15:10:28 2016 +0000
drm/i915: Cache ringbuffer GTT VMA
We can also remove the ring buffer start updates on every
context update since the address will not change for the
duration of the LRC pin.
For GuC we can remove the update altogether because it
only cares about the ring buffer start.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Alex Dai <yu.dai@intel.com>
Cc: Dave Gordon <david.s.gordon@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1453466567-33369-1-git-send-email-tvrtko.ursulin@linux.intel.com
Tvrtko was looking through the execbuffer-ioctl and noticed that the
uABI was tightly coupled to our internal engine identifiers. Close
inspection also revealed that we leak those internal engine identifiers
through the busy-ioctl, and those internal identifiers already do not
match the user identifiers. Fortuitiously, there is only one user of the
set of busy rings from the busy-ioctl, and they only wish to choose
between the RENDER and the BLT engines.
Let's fix the userspace ABI while we still can.
v2: Update the uAPI documentation to explain the identifiers.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Testcase: igt/gem_busy
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1452876706-21620-1-git-send-email-chris@chris-wilson.co.uk
Broadwell and later currently use the same unordered command sequence to
update the seqno in the HWS status page and then assert the user
interrupt. We should apply the w/a from legacy (where we do an mmio
read to delay the seqno read after the interrupt), but this is not
enough to enforce coherent seqno visibilty on Skylake. Rather than
search for the proper post-interrupt seqno barrier, use a strongly
ordered command sequence to write the seqno, then assert the user
interrupt from the ring.
v2: Move around the wa tail dwords to avoid adding duplicate code.
v3: Add references, comments on workarounds and bit5 check.
References: https://bugs.freedesktop.org/show_bug.cgi?id=93693
Testcase: igt/gem_ring_sync_loop #skl
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1453297415-17793-1-git-send-email-mika.kuoppala@intel.com
There are a few bits of code which the transformations implemented by
the previous patch reveal to be suboptimal, once the notion of a per-
ring default context has gone away. So this tidies up the leftovers.
It could have been squashed into the previous patch, but that would have
made that patch less clearly a simple transformation. In particular, any
change which alters the code block structure or indentation has been
deferred into this separate patch, because such things tend to make
diffs more difficult to read.
v4: Rebased
Signed-off-by: Dave Gordon <david.s.gordon@intel.com>
Reviewed-by: Nick Hoath <nicholas.hoath@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1453230175-19330-4-git-send-email-david.s.gordon@intel.com
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Now that we've eliminated a lot of uses of ring->default_context,
we can eliminate the pointer itself.
All the engines share the same default intel_context, so we can just
keep a single reference to it in the dev_priv structure rather than one
in each of the engine[] elements. This make refcounting more sensible
too, as we now have a refcount of one for the one pointer, rather than
a refcount of one but multiple pointers.
From an idea by Chris Wilson.
v2: transform an extra instance of ring->default_context introduced by
42f1cae8c drm/i915: Restore inhibiting the load of the default context
That patch's commentary includes:
v2: Mark the global default context as uninitialized on GPU reset so
that the context-local workarounds are reloaded upon re-enabling
The code implementing that now also benefits from the replacement of
the multiple (per-ring) pointers to the default context with a single
pointer to the unique kernel context.
v4: Rebased, remove underused local (Nick Hoath)
Signed-off-by: Dave Gordon <david.s.gordon@intel.com>
Reviewed-by: Nick Hoath <nicholas.hoath@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1453230175-19330-3-git-send-email-david.s.gordon@intel.com
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
There are a number of places where the driver needs a request, but isn't
working on behalf of any specific user or in a specific context. At
present, we associate them with the per-engine default context. A future
patch will abolish those per-engine context pointers; but we can already
eliminate a lot of the references to them, just by making the allocator
allow NULL as a shorthand for "an appropriate context for this ring",
which will mean that the callers don't need to know anything about how
the "appropriate context" is found (e.g. per-ring vs per-device, etc).
So this patch renames the existing i915_gem_request_alloc(), and makes
it local (static inline), and replaces it with a wrapper that provides
a default if the context is NULL, and also has a nicer calling
convention (doesn't require a pointer to an output parameter). Then we
change all callers to use the new convention:
OLD:
err = i915_gem_request_alloc(ring, user_ctx, &req);
if (err) ...
NEW:
req = i915_gem_request_alloc(ring, user_ctx);
if (IS_ERR(req)) ...
OLD:
err = i915_gem_request_alloc(ring, ring->default_context, &req);
if (err) ...
NEW:
req = i915_gem_request_alloc(ring, NULL);
if (IS_ERR(req)) ...
v4: Rebased
Signed-off-by: Dave Gordon <david.s.gordon@intel.com>
Reviewed-by: Nick Hoath <nicholas.hoath@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1453230175-19330-2-git-send-email-david.s.gordon@intel.com
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
LRC lifetime is well defined so we can cache the page pointing
to the object backing store in the context in order to avoid
walking over the object SG page list from the interrupt context
without the big lock held.
v2: Also cache the mapping. (Chris Wilson)
v3: Unmap on the error path.
v4: No need to cache the page. (Chris Wilson)
v5: No need to dirty the page on unpin. (Chris Wilson)
v6: kmap() cannot fail and use kmap_to_page to simplify unpin.
(Chris Wilson)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Dave Gordon <david.s.gordon@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1452877965-32042-1-git-send-email-tvrtko.ursulin@linux.intel.com
Purpose is to avoid calling i915_gem_obj_ggtt_offset from the
interrupt context without the big lock held.
v2: Renamed gtt_start to gtt_offset. (Daniel Vetter)
v3: Cache the VMA instead of address. (Chris Wilson)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1452870629-13830-2-git-send-email-tvrtko.ursulin@linux.intel.com
LRC code was calling GEM API like i915_gem_obj_ggtt_offset from
places where the struct_mutex cannot be grabbed (irq handlers).
To avoid that this patch caches some interesting bits and values
in the engine and context structures.
Some usages are also removed where they are not needed like a
few asserts which are either impossible or have been checked
already during engine initialization.
Side benefit is also that interrupt handlers and command
submission stop evaluating invariant conditionals, like what
Gen we are running on, on every interrupt and every command
submitted.
This patch deals with logical ring context id and descriptors
while subsequent patches will deal with the remaining issues.
v2:
* Cache the VMA instead of the address. (Chris Wilson)
* Incorporate Dave Gordon's good comments and function name.
v3:
* Extract ctx descriptor template to a function and group
functions dealing with ctx descriptor & co together near
top of the file. (Dave Gordon)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dave Gordon <david.s.gordon@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1452870629-13830-1-git-send-email-tvrtko.ursulin@linux.intel.com
We need to set the DC FLUSH PIPE_CONTROL bit on Gen7+ to guarantee
that writes performed via the HDC are visible in memory. Fixes an
intermittent failure in a Piglit test that writes to a BO from a
shader using GL atomic counters (implemented as HDC untyped atomics)
and then expects the memory to read back the same value after mapping
it on the CPU.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91298
Tested-by: Mark Janes <mark.a.janes@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1452740379-3194-1-git-send-email-currojerez@riseup.net
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Majority of them was duplicated code and only render ring
currently overrides some of them. We can save some lines of
code and also take away the confusion on why bsd2 did not
do the seqno coherency workaround. (VCS2 ring does not exist
on platforms where workaround is needed but that was not
documented in the code.)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1452619956-27014-1-git-send-email-tvrtko.ursulin@linux.intel.com
Extend the same reasoning as in the patch listed below. It's not an
error for the workaround list to be empty if no workarounds are needed.
commit 02235808b6
Author: Francisco Jerez <currojerez@riseup.net>
Date: Wed Oct 7 14:44:01 2015 +0300
drm/i915: Don't warn if the workaround list is empty.
Signed-off-by: Wayne Boyer <wayne.boyer@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1452129330-3484-2-git-send-email-rodrigo.vivi@intel.com
This is a useful thing to have around as a function because the mechanism may
change in the future.
There is a net increase in LOC here, and it will continue to be the case on GEN8
and GEN9 - but future GENs may have an alternate mechanism for doing this.
Signed-off-by: Ben Widawsky <benjamin.widawsky@intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1452018609-10142-4-git-send-email-benjamin.widawsky@intel.com
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
There is no point in emitting a WARN since the backtrace will always be the
same. Errors have actually become easier to spot given the large number of WARNs
which exist today in modesetting paths.
Signed-off-by: Ben Widawsky <benjamin.widawsky@intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1452018609-10142-3-git-send-email-benjamin.widawsky@intel.com
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
I think this patch is a worthwhile cleanup even if it might look only marginally
useful. It gets more useful in upcoming patches and for handling of future GEN
platforms.
The only non-mechanical part of this is the removal of the extra & operation on
the ring->next_context_status_buffer. This is safe because right above this, we
already did a modulus operation.
Signed-off-by: Ben Widawsky <benjamin.widawsky@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1452018609-10142-2-git-send-email-benjamin.widawsky@intel.com
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The GuC code needs to know the size of a logical context, so we
expose get_lr_context_size(), renaming it intel_lr_context__size()
to fit the naming conventions for nonstatic functions.
For: VIZ-2021
Signed-off-by: Dave Gordon <david.s.gordon@intel.com>
Signed-off-by: Alex Dai <yu.dai@intel.com>
Reviewed-by: Dave Gordon <david.s.gordon@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1450468812-4882-2-git-send-email-yu.dai@intel.com
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Split GuC work queue space checking from submission and move it to
ring_alloc_request_extras. The reason is that failure in later
i915_add_request() won't be handled. In the case timeout happens,
driver can return early in order to handle the error.
v1: Move wq_reserve_space to ring_reserve_space
v2: Move wq_reserve_space to alloc_request_extras (Chris Wilson)
v3: The work queue head pointer is cached by driver now. So we can
quickly return if space is available.
s/reserve/check/g (Dave Gordon)
v4: Update cached wq head after ring doorbell; check wq space before
ring doorbell in case unexpected error happens; call wq space
check only when GuC submission is enabled. (Dave Gordon)
Signed-off-by: Alex Dai <yu.dai@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1450295155-10050-1-git-send-email-yu.dai@intel.com
Reviewed-by: Dave Gordon <david.s.gordon@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
It is unclear if this is even required on BXT.
v2: Make sure to set the default value to false. Uncertain how my compiler
doesn't complain with v1.
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Ben Widawsky <benjamin.widawsky@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1450374597-7021-1-git-send-email-benjamin.widawsky@intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
In various places, a single page of a (regular) GEM object is mapped into
CPU address space and updated. In each such case, either the page or the
the object should be marked dirty, to ensure that the modifications are
not discarded if the object is evicted under memory pressure.
The typical sequence is:
va = kmap_atomic(i915_gem_object_get_page(obj, pageno));
*(va+offset) = ...
kunmap_atomic(va);
Here we introduce i915_gem_object_get_dirty_page(), which performs the
same operation as i915_gem_object_get_page() but with the side-effect
of marking the returned page dirty in the pagecache. This will ensure
that if the object is subsequently evicted (due to memory pressure),
the changes are written to backing store rather than discarded.
Note that it works only for regular (shmfs-backed) GEM objects, but (at
least for now) those are the only ones that are updated in this way --
the objects in question are contexts and batchbuffers, which are always
shmfs-backed.
Separate patches deal with the cases where whole objects are (or may
be) dirtied.
v3: Mark two more pages dirty in the page-boundary-crossing
cases of the execbuffer relocation code [Chris Wilson]
Signed-off-by: Dave Gordon <david.s.gordon@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1449773486-30822-2-git-send-email-david.s.gordon@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Based on Chris Wilson's patch from 6 months ago, rebased and adapted.
The current implementation of intel_ring_initialized() is too heavyweight;
it's a non-inlined function that chases several levels of pointers. This
wouldn't matter too much if it were rarely called, but it's used inside
the iterator test of for_each_ring() and is therefore called quite
frequently. So let's make it simple and inline ...
The idea here is to use ring->dev as an indicator showing which engines
have been initialised and are therefore to be included in iterations that
use for_each_ring(). This allows us to avoid multiple memory references
and a (non-inlined) function call on each iteration of each such loop.
Fixes regression from
commit 48d823878d
Author: Oscar Mateo <oscar.mateo@intel.com>
Date: Thu Jul 24 17:04:23 2014 +0100
drm/i915/bdw: Generic logical ring init and cleanup
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Dave Gordon <david.s.gordon@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1449586956-32360-2-git-send-email-david.s.gordon@intel.com
This reverts commit 6d65ba943a.
Mika Kuoppala traced down a use-after-free crash in module unload to
this commit, because ring->last_context is leaked beyond when the
context gets destroyed. Mika submitted a quick fix to patch that up in
the context destruction code, but that's too much of a hack.
The right fix is instead for the ring to hold a full reference onto
it's last context, like we do for legacy contexts.
Since this is causing a regression in BAT it gets reverted before we
can close this.
Cc: Nick Hoath <nicholas.hoath@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Gordon <david.s.gordon@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Alex Dai <yu.dai@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=93248
Acked-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Use the first retired request on a new context to unpin
the old context. This ensures that the hw context remains
bound until it has been written back to by the GPU.
Now that the context is pinned until later in the request/context
lifecycle, it no longer needs to be pinned from context_queue to
retire_requests.
This fixes an issue with GuC submission where the GPU might not
have finished writing back the context before it is unpinned. This
results in a GPU hang.
v2: Moved the new pin to cover GuC submission (Alex Dai)
Moved the new unpin to request_retire to fix coverage leak
v3: Added switch to default context if freeing a still pinned
context just in case the hw was actually still using it
v4: Unwrapped context unpin to allow calling without a request
v5: Only create a switch to idle context if the ring doesn't
already have a request pending on it (Alex Dai)
Rename unsaved to dirty to avoid double negatives (Dave Gordon)
Changed _no_req postfix to __ prefix for consistency (Dave Gordon)
Split out per engine cleanup from context_free as it
was getting unwieldy
Corrected locking (Dave Gordon)
v6: Removed some bikeshedding (Mika Kuoppala)
Added explanation of the GuC hang that this fixes (Daniel Vetter)
v7: Removed extra per request pinning from ring reset code (Alex Dai)
Added forced ring unpin/clean in error case in context free (Alex Dai)
Signed-off-by: Nick Hoath <nicholas.hoath@intel.com>
Issue: VIZ-4277
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Gordon <david.s.gordon@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Alex Dai <yu.dai@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Alex Dai <yu.dai@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJWUmHZAAoJEHm+PkMAQRiGHtcH/RVRsn8re0WdRWYaTr9+Hknm
CGlRJN4LKecttgYQ/2bS1QsDbt8usDPBiiYVopqGXQxPBmjyDAqPjsa+8VzCaVc6
WA+9LDB+PcW28lD6BO+qSZCOAm7hHSZq7dtw9x658IqO+mI2mVeCybsAyunw2iWi
Kf5q90wq6tIBXuT8YH9MXGrSCQw00NclbYeYwB9CmCt9hT/koEFBdl7uFUFitB+Q
GSPTz5fXhgc5Lms85n7flZlrVKoQKmtDQe4/DvKZm+SjsATHU9ru89OxDBdS5gSG
YcEIM4zc9tMjhs3GC9t6WXf6iFOdctum8HOhUoIN/+LVfeOMRRwAhRVqtGJ//Xw=
=DCUg
-----END PGP SIGNATURE-----
Merge tag 'v4.4-rc2' into drm-intel-next-queued
Linux 4.4-rc2
Backmerge to get at
commit 1b0e3a049e
Author: Imre Deak <imre.deak@intel.com>
Date: Thu Nov 5 23:04:11 2015 +0200
drm/i915/skl: disable display side power well support for now
so that we can proplery re-eanble skl power wells in -next.
Conflicts are just adjacent lines changed, except for intel_fbdev.c
where we need to interleave the changs. Nothing nefarious.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
This reverts commit 2e5356da37.
It is now redundant as it is already covered in below commit which introduced
the changes to reuse initialization of resources in resume/reset path.
commit e84fe80337
Author: Nick Hoath <nicholas.hoath@intel.com>
Date: Fri Sep 11 12:53:46 2015 +0100
drm/i915: Split alloc from init for lrc
lrc_setup_hardware_status_page() in the same function gen8_init_common_ring()
takes care of this.
Cc: Nick Hoath <nicholas.hoath@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Arun Siluvery <arun.siluvery@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1447951664-9347-1-git-send-email-arun.siluvery@linux.intel.com
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Make I915_READ and I915_WRITE more type safe by wrapping the register
offset in a struct. This should eliminate most of the fumbles we've had
with misplaced parens.
This only takes care of normal mmio registers. We could extend the idea
to other register types and define each with its own struct. That way
you wouldn't be able to accidentally pass the wrong thing to a specific
register access function.
The gpio_reg setup is probably the ugliest thing left. But I figure I'd
just leave it for now, and wait for some divine inspiration to strike
before making it nice.
As for the generated code, it's actually a bit better sometimes. Eg.
looking at i915_irq_handler(), we can see the following change:
lea 0x70024(%rdx,%rax,1),%r9d
mov $0x1,%edx
- movslq %r9d,%r9
- mov %r9,%rsi
- mov %r9,-0x58(%rbp)
- callq *0xd8(%rbx)
+ mov %r9d,%esi
+ mov %r9d,-0x48(%rbp)
callq *0xd8(%rbx)
So previously gcc thought the register offset might be signed and
decided to sign extend it, just in case. The rest appears to be
mostly just minor shuffling of instructions.
v2: i915_mmio_reg_{offset,equal,valid}() helpers added
s/_REG/_MMIO/ in the register defines
mo more switch statements left to worry about
ring_emit stuff got sorted in a prep patch
cmd parser, lrc context and w/a batch buildup also in prep patch
vgpu stuff cleaned up and moved to a prep patch
all other unrelated changes split out
v3: Rebased due to BXT DSI/BLC, MOCS, etc.
v4: Rebased due to churn, s/i915_mmio_reg_t/i915_reg_t/
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1447853606-2751-1-git-send-email-ville.syrjala@linux.intel.com
We set up a load of LRIs in the logical ring context. Wrap that stuff
in a macro to avoid typos with position of each reg/value pair in the
context. This also makes it easier to make the register defines type
safe.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1446672017-24497-24-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
When register type safety happens, we can't just try to emit the
register itself to the ring. Instead we'll need to extract the
offset from it first. Add some convenience functions that will do
that.
v2: Convert MOCS setup too
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1446672017-24497-20-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Pull drm updates from Dave Airlie:
"I Was Almost Tempted To Capitalise Every Word, but then I decided I
couldn't read it myself!
I've also got one pull request for the sti driver outstanding. It
relied on a commit in Greg's tree and I didn't find out in time, that
commit is in your tree now so I might send that along once this is
merged.
I also had the accidental misfortune to have access to a Skylake on my
desk for a few days, and I've had to encourage Intel to try harder,
which seems to be happening now.
Here is the main drm-next pull request for 4.4.
Highlights:
New driver:
vc4 driver for the Rasberry Pi VPU.
(From Eric Anholt at Broadcom.)
Core:
Atomic fbdev support
Atomic helpers for runtime pm
dp/aux i2c STATUS_UPDATE handling
struct_mutex usage cleanups.
Generic of probing support.
Documentation:
Kerneldoc for VGA switcheroo code.
Rename to gpu instead of drm to reflect scope.
i915:
Skylake GuC firmware fixes
HPD A support
VBT backlight fallbacks
Fastboot by default for some systems
FBC work
BXT/SKL workarounds
Skylake deeper sleep state fixes
amdgpu:
Enable GPU scheduler by default
New atombios opcodes
GPUVM debugging options
Stoney support.
Fencing cleanups.
radeon:
More efficient CS checking
nouveau:
gk20a instance memory handling improvements.
Improved PGOB detection and GK107 support
Kepler GDDR5 PLL statbility improvement
G8x/GT2xx reclock improvements
new userspace API compatiblity fixes.
virtio-gpu:
Add 3D support - qemu 2.5 has it merged for it's gtk backend.
msm:
Initial msm88896 (snapdragon 8200)
exynos:
HDMI cleanups
Enable mixer driver byt default
Add DECON-TV support
vmwgfx:
Move to using memremap + fixes.
rcar-du:
Add support for R8A7793/4 DU
armada:
Remove support for non-component mode
Improved plane handling
Power savings while in DPMS off.
tda998x:
Remove unused slave encoder support
Use more HDMI helpers
Fix EDID read handling
dwhdmi:
Interlace video mode support for ipu-v3/dw_hdmi
Hotplug state fixes
Audio driver integration
imx:
More color formats support.
tegra:
Minor fixes/improvements"
[ Merge fixup: remove unused variable 'dev' that had all uses removed in
commit 4e270f0880: "drm/gem: Drop struct_mutex requirement from
drm_gem_mmap_obj" ]
* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (764 commits)
drm/vmwgfx: Relax irq locking somewhat
drm/vmwgfx: Properly flush cursor updates and page-flips
drm/i915/skl: disable display side power well support for now
drm/i915: Extend DSL readout fix to BDW and SKL.
drm/i915: Do graphics device reset under forcewake
drm/i915: Skip fence installation for objects with rotated views (v4)
vga_switcheroo: Drop client power state VGA_SWITCHEROO_INIT
drm/amdgpu: group together common fence implementation
drm/amdgpu: remove AMDGPU_FENCE_OWNER_MOVE
drm/amdgpu: remove now unused fence functions
drm/amdgpu: fix fence fallback check
drm/amdgpu: fix stoping the scheduler timeout
drm/amdgpu: cleanup on error in amdgpu_cs_ioctl()
drm/i915: Fix locking around GuC firmware load
drm/amdgpu: update Fiji's Golden setting
drm/amdgpu: update Fiji's rev id
drm/amdgpu: extract common code in vi_common_early_init
drm/amd/scheduler: don't oops on failure to load
drm/amdgpu: don't oops on failure to load (v2)
drm/amdgpu: don't VT switch on suspend
...
Having flushed all requests from all queues, we know that all
ringbuffers must now be empty. However, since we do not reclaim
all space when retiring the request (to prevent HEADs colliding
with rapid ringbuffer wraparound) the amount of available space
on each ringbuffer upon reset is less than when we start. Do one
more pass over all the ringbuffers to reset the available space
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Arun Siluvery <arun.siluvery@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Dave Gordon <david.s.gordon@intel.com>
Revision checks are almost always accompanied by a platform check. (The
exceptions are platform specific code.) Add helpers to check for a
platform and a revision range: IS_SKL_REVID() and IS_BXT_REVID(). In
most places this simplifies and clarifies the code. It will be obvious
that revid macros are used for the correct platform.
This should make it easier to find all the revision checks for
workarounds for each platform, and make it easier to remove them once we
drop support for early hardware revisions.
This should also make it easier to differentiate between Skylake and
Kabylake revision checks when Kabylake support is added.
v2: rebase
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1445343722-3312-3-git-send-email-jani.nikula@intel.com
- dmc fixes from Animesh (not yet all) for deeper sleep states
- piles of prep patches from Ville to make mmio functions type-safe
- more fbc work from Paulo all over
- w/a shuffling from Arun Siluvery
- first part of atomic watermark updates from Matt and Ville (later parts had to
be dropped again unfortunately)
- lots of patches to prepare bxt dsi support ( Shashank Sharma)
- userptr fixes from Chris
- audio rate interface between i915/snd_hda plus kerneldoc (Libin Yang)
- shrinker improvements and fixes (Chris Wilson)
- lots and lots of small patches all over
* tag 'drm-intel-next-2015-10-10' of git://anongit.freedesktop.org/drm-intel: (134 commits)
drm/i915: Update DRIVER_DATE to 20151010
drm/i915: Partial revert of atomic watermark series
drm/i915: Early exit from semaphore_waits_for for execlist mode.
drm/i915: Remove wrong warning from i915_gem_context_clean
drm/i915: Determine the stolen memory base address on gen2
drm/i915: fix FBC buffer size checks
drm/i915: fix CFB size calculation
drm/i915: remove pre-atomic check from SKL update_primary_plane
drm/i915: don't allocate fbcon from stolen memory if it's too big
Revert "drm/i915: Call encoder hotplug for init and resume cases"
Revert "drm/i915: Add hot_plug hook for hdmi encoder"
drm/i915: use error path
drm/i915/irq: Fix misspelled word register in kernel-doc
drm/i915/irq: Fix kernel-doc warnings
drm/i915: Hook up ring workaround writes at context creation time on Gen6-7.
drm/i915: Don't warn if the workaround list is empty.
drm/i915: Resurrect golden context on gen6/7
drm/i915/chv: remove pre-production hardware workarounds
drm/i915/snb: remove pre-production hardware workaround
drm/i915/bxt: Set time interval unit to 0.833us
...
In order to flush the results from in-batch pipecontrol writes (used for
example in glQuery) before declaring the batch complete (and so declaring
the query results coherent), we need to set the FlushEnable bit in our
flushing pipecontrol. The FlushEnable bit "waits until all previous
writes of immediate data from post-sync circles are complete before
executing the next command".
I get GPU hangs on byt without flushing these writes (running ue4).
piglit has examples where the flush is required for correct rendering.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Cc: stable@vger.kernel.org
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Passing cliprects into the kernel for it to re-execute the batch buffer
with different CMD_DRAWRECT died out long ago. As DRI1 support has been
removed from the kernel, we can now simply reject any execbuf trying to
use this "feature".
To keep Daniel happy with the prospect of being able to reuse these
fields in the next decade, continue to ensure that current userspace is
not passing garbage in through the dead fields.
v2: Fix the cliprects_ptr check
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Dave Gordon <david.s.gordon@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
A previous commit resets the Context Status Buffer (CSB) read pointer in
ring init
commit c0a03a2e4c ("drm/i915: Reset CSB read pointer in ring init")
This is generally correct, but this pointer is not reset after
suspend/resume in some platforms (cht). In this case, the driver should
read the register value instead of resetting the sw read counter to 0.
Otherwise we process old events, leading to unwanted pre-emptions or
something worse.
But in other platforms (bdw) and also during GPU reset or power up, the
CSBWP is reset to 0x7 (an invalid number), and in this case the read
pointer should be set to 5 (the interrupt code will increment this
counter one more time, and will start reading from CSB[0]).
v2: When the CSB registers are reset, the read pointer needs to be set
to 5, otherwise the first write (CSB[0]) won't be read (Mika).
Replace magic numbers with GEN8_CSB_ENTRIES (6) and GEN8_CSB_PTR_MASK
(0x07).
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: stable@vger.kernel.org # v4.0+
Signed-off-by: Lei Shen <lei.shen@intel.com>
Signed-off-by: Deepak S <deepak.s@intel.com>
Signed-off-by: Michel Thierry <michel.thierry@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The function can return negative value.
The problem has been detected using proposed semantic patch
scripts/coccinelle/tests/unsigned_lesser_than_zero.cocci [1].
[1]: http://permalink.gmane.org/gmane.linux.kernel/2038576
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This patch fix following warnings while "make xmldocs".
.//drivers/gpu/drm/i915/intel_lrc.c:780: warning: No description
found for parameter 'req'
.//drivers/gpu/drm/i915/intel_lrc.c:780: warning: Excess function
parameter 'request' description in 'intel_logical_ring_begin'
.//drivers/gpu/drm/i915/intel_lrc.c:780: warning: Excess function
parameter 'ctx' description in 'intel_logical_ring_begin'
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Extend init/init_hw split to context init.
- Move context initialisation in to i915_gem_init_hw
- Move one off initialisation for render ring to
i915_gem_validate_context
- Move default context initialisation to logical_ring_init
Rename intel_lr_context_deferred_create to
intel_lr_context_deferred_alloc, to reflect reduced functionality &
alloc/init split.
This patch is intended to split out the allocation of resources &
initialisation to allow easier reuse of code for resume/gpu reset.
v2: Removed function ptr wrapping of do_switch_context (Daniel Vetter)
Left ->init_context int intel_lr_context_deferred_alloc
(Daniel Vetter)
Remove unnecessary init flag & ring type test. (Daniel Vetter)
Improve commit message (Daniel Vetter)
v3: On init/reinit, set the hw next sequence number to the sw next
sequence number. This is set to 1 at driver load time. This prevents
the seqno being reset on reinit (Chris Wilson)
v4: Set seqno back to ~0 - 0x1000 at start-of-day, and increment by 0x100
on reset.
This makes it obvious which bbs are which after a reset. (David Gordon
& John Harrison)
Rebase.
v5: Rebase. Fixed rebase breakage. Put context pinning in separate
function. Removed code churn. (Thomas Daniel)
v6: Cleanup up issues introduced in v2 & v5 (Thomas Daniel)
Issue: VIZ-4798
Signed-off-by: Nick Hoath <nicholas.hoath@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: John Harrison <john.c.harrison@intel.com>
Cc: David Gordon <david.s.gordon@intel.com>
Cc: Thomas Daniel <thomas.daniel@intel.com>
Reviewed-by: Thomas Daniel <thomas.daniel@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
When WaEnableForceRestoreInCtxtDescForVCS is required, it is only
safe to send new contexts if the last reported event is "active to
idle". Otherwise the same context can fully preempt itself because
lite-restore is disabled.
Testcase: igt/gem_concurrent_blit
Reported-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Michel Thierry <michel.thierry@intel.com>
Reviewed-by: Arun Siluvery <arun.siluvery@linux.intel.com>
Tested-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Also check for correct revision id in each Gen9 platform (SKL until B0
and BXT until A0).
Cc: Nick Hoath <nicholas.hoath@intel.com>
Signed-off-by: Michel Thierry <michel.thierry@intel.com>
Reviewed-by: Arun Siluvery <arun.siluvery@linux.intel.com>
Tested-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
A small, very small, step to sharing the duplicate code between
execlists and legacy submission engines, starting with the ringbuffer
allocation code.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Arun Siluvery <arun.siluvery@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Dave Gordon <david.s.gordon@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Backmerge -fixes since there's more DDI-E related cleanups on top of
the pile of -fixes for skl that just landed for 4.3.
Conflicts:
drivers/gpu/drm/i915/intel_display.c
drivers/gpu/drm/i914/intel_dp.c
drivers/gpu/drm/i915/intel_lrc.c
Conflicts are all fairly harmless adjacent line stuff.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Broadwell hardware supports both ring buffer mode and execlist mode.
When i915 runs inside a VM with Intel GVT-g, we allow execlist mode
only.
The main reason of EXECLIST only is that GVT-g does not support the
dynamic mode switch between ring buffer mode and execlist mode when
running multiple virtual machines.
v2:
- Adjust the position of vgpu check in sanitize function (Joonas)
- Add vgpu error check in context initialization. (Joonas, Daniel)
Signed-off-by: Zhiyuan Lv <zhiyuan.lv@intel.com>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This is based on Mika Kuoppala's patch below:
http://article.gmane.org/gmane.comp.freedesktop.xorg.drivers.intel/61104/match=workaround+hw+preload
The patch will preallocate the page directories for 32-bit PPGTT when
i915 runs inside a virtual machine with Intel GVT-g. With this change,
the root pointers in EXECLIST context will always keep the same.
The change is needed for vGPU because Intel GVT-g will do page table
shadowing, and needs to track all the page table changes from guest
i915 driver. However, if guest PPGTT is modified through GPU commands
like LRI, it is not possible to trap the operations in the right time,
so it will be hard to make shadow PPGTT to work correctly.
Shadow PPGTT could be much simpler with this change. Meanwhile
hypervisor could simply prohibit any attempt of PPGTT modification
through GPU command for security.
The function gen8_preallocate_top_level_pdps() in the patch is from
Mika, with only one change to set "used_pdpes" to avoid duplicated
allocation later.
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Dave Gordon <david.s.gordon@intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: Zhiyuan Lv <zhiyuan.lv@intel.com>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
By running igt/store_dword_loop_render on BXT we can hit a coherency
problem where the seqno written at GPU command completion time is not
seen by the CPU. This results in __i915_wait_request seeing the stale
seqno and not completing the request (not considering the lost
interrupt/GPU reset mechanism). I also verified that this isn't a case
of a lost interrupt, or that the command didn't complete somehow: when
the coherency issue occured I read the seqno via an uncached GTT mapping
too. While the cached version of the seqno still showed the stale value
the one read via the uncached mapping was the correct one.
Work around this issue by clflushing the corresponding CPU cacheline
following any store of the seqno and preceding any reading of it. When
reading it do this only when the caller expects a coherent view.
v2:
- fix using the proper logical && instead of a bitwise & (Jani, Mika)
- limit the workaround to A stepping, on later steppings this HW issue
is fixed
v3:
- use a separate get_seqno/set_seqno vfunc (Chris)
Testcase: igt/store_dword_loop_render
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
MI_STORE_REGISTER_MEM, MI_LOAD_REGISTER_MEM instructions are not really
variable length instructions unlike MI_LOAD_REGISTER_IMM where it expects
(reg, addr) pairs so use fixed length for these instructions.
v2: rebase
Cc: Dave Gordon <david.s.gordon@intel.com>
Signed-off-by: Arun Siluvery <arun.siluvery@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
[danvet: Appease checkpatch as Mika spotted in i915_reg.h - it seems
terminally unhappy about i915_cmd_parser.c so that would be a separate
patch.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJV2pUkAAoJEHm+PkMAQRiGCIoH/Rb29ZjdCoZJp9OtnjAG+qRc
bG3YuomIdib86x7xHRKKaLWBa7din7IYjuwT/X4S4duO5a1R5Lp1sRG3IlGfhT0W
nBNbjFl4q4bOyiTPtTRTYyh4g5UQv4IuyCnCmZyCTJyVi/O6HVM9TWKUzm68P2dJ
30LwLUcQJ+mHueGJwFBAXe2BaojEpvYCdSX6tvbrQ/8X3FrVExZXuJl4uMYNFYNK
ZwG/v5t7tYOiAe76JGbrEuVFPZWLPEW7amHOWR0T4Ye4nWTlBgx7fENiNRlfgcvI
CM16l/xkyrZQ3Q5jZy1qYDfdHYF++dyEDysX4w1ae/X0aaLZn7l+u5VQD6WpkQQ=
=IF6I
-----END PGP SIGNATURE-----
Merge tag 'v4.2-rc8' into drm-next
Linux 4.2-rc8
Backmerge required for Intel so they can fix their -next tree up properly.
Everytime we use the logical context with execlists it becomes dirty (as
the hardware will write the new register values afterwards, as well as
the GPU state that will be used). We need to then flag the context as
dirty everytime since after a swap-out/swap-in cycle the dirty flag will
be cleared, and a further swap-out cycle will then loose the most recent
GPU state.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@vger.kernel.org
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
GuC-based submission is mostly the same as execlist mode, up to
intel_logical_ring_advance_and_submit(), where the context being
dispatched would be added to the execlist queue; at this point
we submit the context to the GuC backend instead.
There are, however, a few other changes also required, notably:
1. Contexts must be pinned at GGTT addresses accessible by the GuC
i.e. NOT in the range [0..WOPCM_SIZE), so we have to add the
PIN_OFFSET_BIAS flag to the relevant GGTT-pinning calls.
2. The GuC's TLB must be invalidated after a context is pinned at
a new GGTT address.
3. GuC firmware uses the one page before Ring Context as shared data.
Therefore, whenever driver wants to get base address of LRC, we
will offset one page for it. LRC_PPHWSP_PN is defined as the page
number of LRCA.
4. In the work queue used to pass requests to the GuC, the GuC
firmware requires the ring-tail-offset to be represented as an
11-bit value, expressed in QWords. Therefore, the ringbuffer
size must be reduced to the representable range (4 pages).
v2:
Defer adding #defines until needed [Chris Wilson]
Rationalise type declarations [Chris Wilson]
v4:
Squashed kerneldoc patch into here [Daniel Vetter]
v5:
Update request->tail in code common to both GuC and execlist modes.
Add a private version of lr_context_update(), as sharing the
execlist version leads to race conditions when the CPU and
the GuC both update TAIL in the context image.
Conversion of error-captured HWS page to string must account
for offset from start of object to actual HWS (LRC_PPHWSP_PN).
Issue: VIZ-4884
Signed-off-by: Alex Dai <yu.dai@intel.com>
Signed-off-by: Dave Gordon <david.s.gordon@intel.com>
Reviewed-by: Tom O'Rourke <Tom.O'Rourke@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
GuC submission is basically execlist submission, but with the GuC
handling the actual writes to the ELSP and the resulting context
switch interrupts. So to describe a context for submission via
the GuC, we need one of the same functions used in execlist mode.
This commit exposes one such function, changing its name to better
describe what it does (it's related to logical ring contexts rather
than to execlists per se).
v2:
Replaces previous "drm/i915: Move execlists defines from .c to .h"
v3:
Incorporates a change to one of the functions exposed here that was
previously part of an internal patch, but which was omitted from
the version recently committed to drm-intel-nightly:
7a01a0a drm/i915/lrc: Update PDPx registers with lri commands
So we reinstate this change here.
v4:
Drop v3 change, update function parameters due to collision with
8ee3615 drm/i915: Convert execlists_ctx_descriptor() for requests
v5:
Don't expose execlists_update_context() after all. The current
version is no longer compatible with GuC submission; trying to
share the execlist version of this function results in both GuC
and CPU updating TAIL in the context image, with bad results when
they get out of step. The GuC submission path now has its own
private version that just updates the ringbuffer start address,
and not TAIL or PDPx.
v6:
Rebased
Issue: VIZ-4884
Signed-off-by: Dave Gordon <david.s.gordon@intel.com>
Reviewed-by: Tom O'Rourke <Tom.O'Rourke@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
In 64b (48bit canonical) PPGTT addressing, the PDP0 register contains
the base address to PML4, while the other PDP registers are ignored.
In LRC, the addressing mode must be specified in every context
descriptor, and the base address to PML4 is stored in the reg state.
v2: PML4 update in legacy context switch is left for historic reasons,
the preferred mode of operation is with lrc context based submission.
v3: s/gen8_map_page_directory/gen8_setup_page_directory and
s/gen8_map_page_directory_pointer/gen8_setup_page_directory_pointer.
Also, clflush will be needed for bxt. (Akash)
v4: Squashed lrc-specific code and use a macro to set PML4 register.
v5: Rebase after Mika's ppgtt cleanup / scratch merge patch series.
PDP update in bb_start is only for legacy 32b mode.
v6: Rebase after final merged version of Mika's ppgtt/scratch
patches.
v7: There is no need to update the pml4 register value in
execlists_update_context. (Akash)
v8: Move pd and pdp setup functions to a previous patch, they do not
belong here. (Akash)
v9: Check USES_FULL_48BIT_PPGTT instead of GEN8_CTX_ADDRESSING_MODE in
gen8_emit_bb_start to check if emit pdps is needed. (Akash)
Cc: Akash Goel <akash.goel@intel.com>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Michel Thierry <michel.thierry@intel.com> (v2+)
Reviewed-by: Akash Goel <akash.goel@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
If idle to active bit is set, the rest of the fields
in CSQ are not valid.
Bail out early if this is the case in order to prevent
rest of the loop inspecting stale values.
This was found by Bspec/code inspection. Doesn't seem to fix any of
the known issues.
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Arun Siluvery <arun.siluvery@linux.intel.com>
[danvet: Add note about how this was found.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This register needs to be updated with masked writes.
This was found by code inspection and comparison with Bspec and
doesn't seem to fix any known issue.
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
[danvet: Add note about impact.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The Golden batch carries 3D state at the beginning so that HW starts with
a known state. It is carried as a binary blob which is auto-generated from
source. The idea was it would be easier to maintain and keep the complexity
out of the kernel which makes sense as we don't really touch it. However if
you really need to update it then you need to update generator source and
keep the binary blob in sync with it.
There is a need to patch this in bxt to send one additional command to enable
a feature. A solution was to patch the binary data with some additional
data structures (included as part of auto-generator source) but it was
unnecessarily complicated.
Chris suggested the idea of having a secondary batch and execute two batch
buffers. It has clear advantages as we needn't touch the base golden batch,
can customize secondary/auxiliary batch depending on Gen and can be carried
in the driver with no dependencies.
This patch adds support for this auxiliary batch which is inserted at the
end of golden batch and is completely independent from it. Thanks to Mika
for the preliminary review.
v2: Strictly conform to the batch size requirements to cover Gen2 and
add comments to clarify overflow check in macro (Chris, Mika).
v3: aux_batch_offset was declared as u64, change it to u32 (Chris)
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Armin Reese <armin.c.reese@intel.com>
Signed-off-by: Arun Siluvery <arun.siluvery@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Backmerge fixes since it's getting out of hand again with the massive
split due to atomic between -next and 4.2-rc. All the bugfixes in
4.2-rc are addressed already (by converting more towards atomic
instead of minimal duct-tape) so just always pick the version in next
for the conflicts in modeset code.
All the other conflicts are just adjacent lines changed.
Conflicts:
drivers/gpu/drm/i915/i915_drv.h
drivers/gpu/drm/i915/i915_gem_gtt.c
drivers/gpu/drm/i915/intel_display.c
drivers/gpu/drm/i915/intel_drv.h
drivers/gpu/drm/i915/intel_ringbuffer.h
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
In Indirect context w/a batch buffer,
+WaSetDisablePixMaskCammingAndRhwoInCommonSliceChicken
v2: SKL revision id was used for BXT, copy paste error found during
internal review (Bob Beckett).
v3: explain why part of the WA is in Per ctx batch (Mika)
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Arun Siluvery <arun.siluvery@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
In Indirect context w/a batch buffer,
+WaFlushCoherentL3CacheLinesAtContextSwitch:skl,bxt
v2: address static checker warning where unsigned value was checked for
less than zero which is never true (Dan Carpenter).
v3: The WA uses default value of GEN8_L3SQCREG4 during flush but that disables
some other WA; update default value to retain it and document dependency (Mika).
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Arun Siluvery <arun.siluvery@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
In Indirect and Per context w/a batch buffer,
+WaDisableCtxRestoreArbitration
v2: SKL revision id was used for BXT, copy paste error found during
internal review (Bob Beckett).
v3: use updated macro.
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Robert Beckett <robert.beckett@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Arun Siluvery <arun.siluvery@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This patch only enables support for Gen9, the actual WA will be
initialized in subsequent patches.
The WARN that we use to warn user if WA batch support is not available
for a particular Gen is replaced with DRM_ERROR as warning here doesn't
really add much value.
v2: include all infrastructure bits in this patch so that subsequent
changes only correspond the WA added (Chris)
v3: use updated macro.
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Arun Siluvery <arun.siluvery@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
