[ Upstream commit 1f0f1e80fd ]
When there are other PWM controllers enabled along with pwm-lp3943,
pwm-lp3942 is failing to probe with -EEXIST error. This is because
other PWM controllers are probed first and assigned PWM base 0 and
pwm-lp3943 is requesting for 0 again.
In order to avoid this, assign the chip base with -1, so that it is
dynamically allocated.
Fixes: af66b3c093 ("pwm: Add LP3943 PWM driver")
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Uwe Kleine-König <u.kleine-könig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8c6239f6e9 ]
If clk_register fails, we should goto free branch
before function returns to prevent memleak.
Fixes: 163152cbbe ("clk: ti: Add support for FAPLL on dm816x")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Link: https://lore.kernel.org/r/20201113131623.2098222-1-zhangqilong3@huawei.com
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 36c47df85e ]
clang produces a build failure in configurations without COMMON_CLK
when a timeout calculation goes wrong:
arm-linux-gnueabi-ld: drivers/watchdog/coh901327_wdt.o: in function `coh901327_enable':
coh901327_wdt.c:(.text+0x50): undefined reference to `__bad_udelay'
Add a Kconfig dependency to only do build testing when COMMON_CLK
is enabled.
Fixes: da2a68b3eb ("watchdog: Enable COMPILE_TEST where possible")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20201203223358.1269372-1-arnd@kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4c46764733 ]
Forget to set error code when nd_label_alloc_slot failed, and we
add it to avoid overwritten error code.
Fixes: 0ba1c63489 ("libnvdimm: write blk label set")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Link: https://lore.kernel.org/r/20201205115056.2076523-1-zhangqilong3@huawei.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7eb000bdbe ]
The ndo_start_xmit() method must not attempt to free the skb to transmit
when returning NETDEV_TX_BUSY. Therefore, make sure the
korina_send_packet() function returns NETDEV_TX_OK when it frees a packet.
Fixes: ef11291bcd ("Add support the Korina (IDT RC32434) Ethernet MAC")
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20201214220952.19935-1-vincent.stehle@laposte.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 322e53d1e2 ]
'irq_of_parse_and_map()' should be balanced by a corresponding
'irq_dispose_mapping()' call. Otherwise, there is some resources leaks.
Add such a call in the error handling path of the probe function and in the
remove function.
Fixes: 492205050d ("net: Add EMAC ethernet driver found on Allwinner A10 SoC's")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/20201214202117.146293-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 57030a0b62 ]
Even if there is more rx data waiting on the chip, the rx napi poll fn
will never run more than once - it will always read a few buffers, then
bail out and re-arm interrupts. Which results in ping-pong between napi
and interrupt.
This defeats the purpose of napi, and is bad for performance.
Fix by making the rx napi poll behave identically to other ethernet
drivers:
1. initialize rx napi polling with an arbitrary budget (64).
2. in the polling fn, return full weight if rx queue is not depleted,
this tells the napi core to "keep polling".
3. update the rx tail ("ring the doorbell") once for every 8 processed
rx ring buffers.
Thanks to Jakub Kicinski, Eric Dumazet and Andrew Lunn for their expert
opinions and suggestions.
Tested with 20 seconds of full bandwidth receive (iperf3):
rx irqs softirqs(NET_RX)
-----------------------------
before 23827 33620
after 129 4081
Tested-by: Sven Van Asbroeck <thesven73@gmail.com> # lan7430
Fixes: 23f0703c12 ("lan743x: Add main source files for new lan743x driver")
Signed-off-by: Sven Van Asbroeck <thesven73@gmail.com>
Link: https://lore.kernel.org/r/20201215161954.5950-1-TheSven73@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 03f4935135 ]
There is an unescaped left brace in a regex in OPEN_BRACE check. This
throws a runtime error when checkpatch is run with --fix flag and the
OPEN_BRACE check is executed.
Fix it by escaping the left brace.
Link: https://lkml.kernel.org/r/20201115202928.81955-1-dwaipayanray1@gmail.com
Fixes: 8d1824780f ("checkpatch: add --fix option for a couple OPEN_BRACE misuses")
Signed-off-by: Dwaipayan Ray <dwaipayanray1@gmail.com>
Acked-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 597c892038 ]
On 2-node NUMA hosts we see bursts of kswapd reclaim and subsequent
pressure spikes and stalls from cache refaults while there is plenty of
free memory in the system.
Usually, kswapd is woken up when all eligible nodes in an allocation are
full. But the code related to watermark boosting can wake kswapd on one
full node while the other one is mostly empty. This may be justified to
fight fragmentation, but is currently unconditionally done whether
watermark boosting is occurring or not.
In our case, many of our workloads' throughput scales with available
memory, and pure utilization is a more tangible concern than trends
around longer-term fragmentation. As a result we generally disable
watermark boosting.
Wake kswapd only woken when watermark boosting is requested.
Link: https://lkml.kernel.org/r/20201020175833.397286-1-hannes@cmpxchg.org
Fixes: 1c30844d2d ("mm: reclaim small amounts of memory when an external fragmentation event occurs")
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Mel Gorman <mgorman@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 06517c9a33 ]
The page has just been allocated, so its refcount is 1. free_unref_page()
is for use on pages which have a zero refcount. Use __free_page() like
the other implementations of pte_alloc_one().
Link: https://lkml.kernel.org/r/20201125034655.27687-1-willy@infradead.org
Fixes: 1ae9ae5f7d ("sparc: handle pgtable_page_ctor() fail")
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d0edaa28a1 ]
The DMA address returned by dma_map_single() should be checked with
dma_mapping_error(). Fix the ps3stor_setup() function accordingly.
Fixes: 80071802cb ("[POWERPC] PS3: Storage Driver Core")
Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201213182622.23047-1-vincent.stehle@laposte.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ac9645c873 ]
When receiving pages data, return value 'ret' when positive includes
`buf->page_base`, so we should subtract that before it is used for
changing `offset` and comparing against `want`.
This was discovered on the very rare cases where the server returned a
chunk of bytes that when added to the already received amount of bytes
for the pages happened to match the current `recv.len`, for example
on this case:
buf->page_base : 258356
actually received from socket: 1740
ret : 260096
want : 260096
In this case neither of the two 'if ... goto out' trigger, and we
continue to tail parsing.
Worth to mention that the ensuing EMSGSIZE from the continued execution of
`xs_read_xdr_buf` may be observed by an application due to 4 superfluous
bytes being added to the pages data.
Fixes: 277e4ab7d5 ("SUNRPC: Simplify TCP receive code by switching to using iterators")
Signed-off-by: Dan Aloni <dan@kernelim.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9431f7c199 ]
xterm serial channel was leaking a fd used in setting up the
port helper
This bug is prehistoric - it predates switching to git. The "fixes"
header here is really just to mark all the versions we would like this to
apply to which is "Anything from the Cretaceous period onwards".
No dinosaurs were harmed in fixing this bug.
Fixes: b40997b872 ("um: drivers/xterm.c: fix a file descriptor leak")
Signed-off-by: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9b1c0c0e25 ]
Fix a logical error in tty reading. We get 0 and errno == EAGAIN
on the first attempt to read from a closed file descriptor.
Compared to that a true EAGAIN is EAGAIN and -1.
If we check errno for EAGAIN first, before checking the return
value we miss the fact that the descriptor is closed.
This bug is as old as the driver. It was not showing up with
the original POLL based IRQ controller, because it was
producing multiple events. Switching to EPOLL unmasked it.
Fixes: ff6a17989c ("Epoll based IRQ controller")
Signed-off-by: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e3a01cbee9 ]
Ensure that file closes, connection closes, etc are propagated
as interrupts in the interrupt controller.
Fixes: ff6a17989c ("Epoll based IRQ controller")
Signed-off-by: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3cded66330 ]
Fix to return PTR_ERR() error code from the error handling case where
ubifs_hash_get_desc() failed instead of 0 in ubifs_init_authentication(),
as done elsewhere in this function.
Fixes: 49525e5eec ("ubifs: Add helper functions for authentication support")
Signed-off-by: Wang ShaoBo <bobo.shaobowang@huawei.com>
Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6f733cb2e7 ]
A reboot notifier, which stops the WDT by calling the stop hook without
any check, would be registered when we set WDOG_STOP_ON_REBOOT flag.
Howerer we allow the WDT driver to omit the stop hook since commit
"d0684c8a93549" ("watchdog: Make stop function optional") and provide
a module parameter for user that controls the WDOG_STOP_ON_REBOOT flag
in commit 9232c80659 ("watchdog: Add stop_on_reboot parameter to
control reboot policy"). Together that commits make user potential to
insert a watchdog driver that don't provide a stop hook but with the
stop_on_reboot parameter set, then dereferencing of null pointer occurs
on system reboot.
Check the stop hook before registering the reboot notifier to fix the
issue.
Fixes: d0684c8a93 ("watchdog: Make stop function optional")
Signed-off-by: Wang Wensheng <wangwensheng4@huawei.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20201109130512.28121-1-wangwensheng4@huawei.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3e07d24093 ]
As the specification described, users must check busy bit before start
a new loading operation to make sure that the previous loading is done
and the device is ready to accept a new one.
[ chunyan: Massaged changelog ]
Fixes: 4776034670 ("watchdog: Add Spreadtrum watchdog driver")
Signed-off-by: Lingling Xu <ling_ling.xu@unisoc.com>
Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20201029023933.24548-3-zhang.lyra@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f61a59acb4 ]
sprd_wdt_start() would return fail if the loading operation is not completed
in a certain time, disabling watchdog for that case would probably cause
the kernel crash when kick watchdog later, that's too bad, so remove the
watchdog disable operation for the fail case to make sure other parts in
the kernel can run normally.
[ chunyan: Massaged changelog ]
Fixes: 4776034670 ("watchdog: Add Spreadtrum watchdog driver")
Signed-off-by: Lingling Xu <ling_ling.xu@unisoc.com>
Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20201029023933.24548-2-zhang.lyra@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8ae2511112 ]
If HAS_IOMEM is not defined and SIRFSOC_WATCHDOG is enabled,
the build fails with the following error.
drivers/watchdog/sirfsoc_wdt.o: in function `sirfsoc_wdt_probe':
sirfsoc_wdt.c:(.text+0x112):
undefined reference to `devm_platform_ioremap_resource'
Reported-by: Necip Fazil Yildiran <fazilyildiran@gmail.com>
Fixes: da2a68b3eb ("watchdog: Enable COMPILE_TEST where possible")
Link: https://lore.kernel.org/r/20201108162550.27660-2-linux@roeck-us.net
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7f6f1dfb2d ]
The following kbuild warning is seen on a system without HAS_IOMEM.
WARNING: unmet direct dependencies detected for MFD_SYSCON
Depends on [n]: HAS_IOMEM [=n]
Selected by [y]:
- ARMADA_37XX_WATCHDOG [=y] && WATCHDOG [=y] && (ARCH_MVEBU || COMPILE_TEST
This results in a subsequent compile error.
drivers/watchdog/armada_37xx_wdt.o: in function `armada_37xx_wdt_probe':
armada_37xx_wdt.c:(.text+0xdc): undefined reference to `devm_ioremap'
Add the missing dependency.
Reported-by: Necip Fazil Yildiran <fazilyildiran@gmail.com>
Fixes: 54e3d9b518 ("watchdog: Add support for Armada 37xx CPU watchdog")
Link: https://lore.kernel.org/r/20201108162550.27660-1-linux@roeck-us.net
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3841245e84 ]
The alpine-msi driver has an interesting allocation error handling,
where it frees the same interrupts repeatedly. Hilarity follows.
This code is probably never executed, but let's fix it nonetheless.
Fixes: e6b78f2c3e ("irqchip: Add the Alpine MSIX interrupt controller")
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Antoine Tenart <atenart@kernel.org>
Cc: Tsahee Zidenberg <tsahee@annapurnalabs.com>
Cc: Antoine Tenart <atenart@kernel.org>
Link: https://lore.kernel.org/r/20201129135525.396671-1-maz@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 85a7555575 ]
The error handling frees "ctl" but it's still on the "dsp->ctl_list"
list so that could result in a use after free. Remove it from the list
before returning.
Fixes: 2323736dca ("ASoC: wm_adsp: Add basic support for rev 1 firmware file format")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/X9B0keV/02wrx9Xs@mwanda
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f65607cdbc ]
When we set up a TDLS station, we set sta->sta.bandwidth solely based
on the capabilities, because the "what's the current bandwidth" check
is bypassed and only applied for other types of stations.
This leads to the unfortunate scenario that the sta->sta.bandwidth is
160 MHz if both stations support it, but we never actually configure
this bandwidth unless the AP is already using 160 MHz; even for wider
bandwidth support we only go up to 80 MHz (at least right now.)
For iwlwifi, this can also lead to firmware asserts, telling us that
we've configured the TX rates for a higher bandwidth than is actually
available due to the PHY configuration.
For non-TDLS, we check against the interface's requested bandwidth,
but we explicitly skip this check for TDLS to cope with the wider BW
case. Change this to
(a) still limit to the TDLS peer's own chandef, which gets factored
into the overall PHY configuration we request from the driver,
and
(b) limit it to when the TDLS peer is authorized, because it's only
factored into the channel context in this case.
Fixes: 504871e602 ("mac80211: fix bandwidth computation for TDLS peers")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20201206145305.fcc7d29c4590.I11f77e9e25ddf871a3c8d5604650c763e2c5887a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d33a23b053 ]
The bitreverse helper is almost always built into the kernel,
but in a rare randconfig build it is possible to hit a case
in which it is a loadable module while the atmel-i2c driver
is built-in:
arm-linux-gnueabi-ld: drivers/crypto/atmel-i2c.o: in function `atmel_i2c_checksum':
atmel-i2c.c:(.text+0xa0): undefined reference to `byte_rev_table'
Add one more 'select' statement to prevent this.
Fixes: 11105693fa ("crypto: atmel-ecc - introduce Microchip / Atmel ECC driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e1efdb604f ]
The platform device driver name is "max77693-muic", so advertise it
properly in the modalias string. This fixes automated module loading when
this driver is compiled as a module.
Fixes: db1b903742 ("extcon: MAX77693: Add extcon-max77693 driver to support Maxim MAX77693 MUIC device")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1b391c7f2e ]
pm_runtime_get_sync() will increment pm usage at first and it
will resume the device later. If runtime of the device has
error or device is in inaccessible state(or other error state),
resume operation will fail. If we do not call put operation to
decrease the reference, it will result in reference leak in
the two functions(gpmi_init and gpmi_nfc_exec_op). Moreover,
this device cannot enter the idle state and always stay busy or
other non-idle state later. So we fixed it through adding
pm_runtime_put_noidle.
Fixes: 5bc6bb603b ("mtd: rawnand: gpmi: Fix suspend/resume problem")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Acked-by: Han Xu <han.xu@nxp.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20201107110552.1568742-1-zhangqilong3@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5bf5861d6e ]
The periph_clks[] array contains duplicated entry for Security Engine
clock which was meant to be defined for T210, but it wasn't added
properly. This patch corrects the T210 SE entry and fixes the following
error message on T114/T124: "Tegra clk 127: register failed with -17".
Fixes: dc37fec483 ("clk: tegra: periph: Add new periph clks and muxes for Tegra210")
Tested-by Nicolas Chauvet <kwizart@gmail.com>
Reported-by Nicolas Chauvet <kwizart@gmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20201025224212.7790-1-digetx@gmail.com
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c3d4e5b126 ]
platform_get_resource() may fail and in this case a NULL dereference
will occur.
Fix it to use devm_platform_ioremap_resource() instead of calling
platform_get_resource() and devm_ioremap().
This is detected by Coccinelle semantic patch.
@@
expression pdev, res, n, t, e, e1, e2;
@@
res = \(platform_get_resource\|platform_get_resource_byname\)(pdev, t,
n);
+ if (!res)
+ return -EINVAL;
... when != res == NULL
e = devm_ioremap(e1, res->start, e2);
Fixes: dc160e4491 ("remoteproc: qcom: Introduce Non-PAS ADSP PIL driver")
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Link: https://lore.kernel.org/r/1607392460-20516-1-git-send-email-zhangchangzhong@huawei.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aa37448f59 ]
pm_runtime_get_sync will increment pm usage counter even it
failed. Forgetting to pm_runtime_put_noidle will result in
reference leak in adsp_start, so we should fix it.
Fixes: dc160e4491 ("remoteproc: qcom: Introduce Non-PAS ADSP PIL driver")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Link: https://lore.kernel.org/r/20201102143534.144484-1-zhangqilong3@huawei.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a247230500 ]
If the pm_runtime_get_sync failed in q6v5_pds_enable when
loop (i), The unroll_pd_votes will start from (i - 1), and
it will resulted in following problems:
1) pm_runtime_get_sync will increment pm usage counter even it
failed. Forgetting to pm_runtime_put_noidle will result in
reference leak.
2) Have not reset pds[i] performance state.
Then we fix it.
Fixes: 4760a896be ("remoteproc: q6v5-mss: Vote for rpmh power domains")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Link: https://lore.kernel.org/r/20201102143433.143996-1-zhangqilong3@huawei.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 779e0bf476 ]
In procedure ib_register_device, procedure kobject_uevent is called
(advertising that the device is ready for userspace usage) even when
device_enable_and_get() returned an error.
As a result, various RDMA modules attempted to register for the device
even while the device driver was preparing to unregister the device.
Fix this by advertising the device availability only after enabling the
device succeeds.
Fixes: e7a5b4aafd ("RDMA/device: Don't fire uevent before device is fully initialized")
Link: https://lore.kernel.org/r/20201208073545.9723-3-leon@kernel.org
Suggested-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c9f4cad6cd ]
The CSR bit is already cleared when arriving here so remove this section of
duplicate code.
The registers set in m_can_config_endisable() is set to same exact values as
before this patch.
Signed-off-by: Sean Nyekjaer <sean@geanix.com>
Acked-by: Sriram Dash <sriram.dash@samsung.com>
Acked-by: Dan Murphy <dmurphy@ti.com>
Link: https://lore.kernel.org/r/20191211063227.84259-1-sean@geanix.com
Fixes: f524f829b7 ("can: m_can: Create a m_can platform framework")
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 74639cbf51 ]
There isn't any need to overwrite the mode here in the driver with what
has been detected by the firmware, such as DT or ACPI. In fact, if we
use the SPI CS gpio descriptor feature we will overwrite the mode with
SPI_MODE_0 where it already contains SPI_MODE_0 and more importantly
SPI_CS_HIGH. Clearing the SPI_CS_HIGH bit causes the CS line to toggle
when the device is probed when it shouldn't change, confusing the driver
and making it fail to probe. Drop the assignment and let the spi core
take care of it.
Fixes: a17d94f0b6 ("mfd: Add ChromeOS EC SPI driver")
Cc: Simon Glass <sjg@chromium.org>
Cc: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Cc: Alexandru M Stan <amstan@chromium.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Link: https://lore.kernel.org/r/20201204193540.3047030-2-swboyd@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 78ff2733ff ]
Fix to restore BTF if single-stepping causes a page fault and
it is cancelled.
Usually the BTF flag was restored when the single stepping is done
(in resume_execution()). However, if a page fault happens on the
single stepping instruction, the fault handler is invoked and
the single stepping is cancelled. Thus, the BTF flag is not
restored.
Fixes: 1ecc798c67 ("x86: debugctlmsr kprobes")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/160389546985.106936.12727996109376240993.stgit@devnote2
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4420440c57 ]
The warning message from nfsd terminating normally
can confuse system adminstrators or monitoring software.
Though it's not exactly fair to pin-point a commit where it
originated, the current form in the current place started
to appear in:
Fixes: e096bbc648 ("knfsd: remove special handling for SIGHUP")
Signed-off-by: kazuo ito <kzpn200@gmail.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d1b928ee1c ]
The flush_lock is uninitialized, use DEFINE_SPINLOCK
to define and initialize flush_lock.
Fixes: c6e3fd22cd ("Staging: add speakup to the staging directory")
Reported-by: Hulk Robot <hulkci@huawei.com>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20201117012229.3395186-1-yangyingliang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Lokesh Vutla