Thomas Petazzoni a8409c65df ARM: dts: armada-38x: use regulator-boot-on for SATA regulators on Armada 388 GP ... Really, what we meant by regulator-always-on is that the regulators are already turned on by the bootloader, for which regulator-boot-on is a better description. A net advantage of using regulator-boot-on is that the regulator is not touched at boot time by the kernel, which avoids having the hard drives spinning down and then up again, taking several (~5) seconds of additional boot time. In addition, there is no need to have such properties on the child regulators used for SATA. Having it on the parent regulator that really controls the GPIO is sufficient. Without the patch: [ 3.945866] ata2: SATA link down (SStatus 0 SControl 300) [ 3.995862] ata3: SATA link down (SStatus 0 SControl 300) [ 4.005863] ata4: SATA link down (SStatus 0 SControl 300) [ 9.125861] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 9.144575] ata1.00: ATA-8: WDC WD5003ABYX-01WERA1, 01.01S02, max UDMA/133 [ 9.151471] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32) (and you can hear the disk spinning down and up during this 5.1 seconds delay) With the patch: [ 3.945988] ata2: SATA link down (SStatus 0 SControl 300) [ 4.005980] ata4: SATA link down (SStatus 0 SControl 300) [ 4.011404] ata3: SATA link down (SStatus 0 SControl 300) [ 4.145978] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 4.153701] ata1.00: ATA-8: WDC WD5003ABYX-01WERA1, 01.01S02, max UDMA/133 [ 4.160597] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32) Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>		2016-02-09 10:59:58 +01:00
..
include
aks-cdu.dts
alphascale-asm9260-devkit.dts	ARM: dts: add DT for Alphascale ASM9260 SoC	2015-01-19 16:29:45 -08:00
alphascale-asm9260.dtsi	ARM: dts: add DT for Alphascale ASM9260 SoC	2015-01-19 16:29:45 -08:00
alpine-db.dts	ARM: dts: Alpine platform devicetree	2015-03-16 15:34:53 +01:00
alpine.dtsi	ARM: dts: alpine: add internal pci	2015-04-14 01:16:13 +02:00
am33xx-clocks.dtsi	ARM: SoC late changes for v4.1	2015-04-22 09:24:55 -07:00
am33xx.dtsi	Merge branch 'enable-devices' into omap-for-v4.5/fixes	2016-01-25 10:46:21 -08:00
am35xx-clocks.dtsi	ARM: dts: AM35xx: fix system control module clocks	2015-06-01 10:29:35 -07:00
am43x-epos-evm.dts	ARM: dts: am437x: pixcir_tangoc: use correct flags for irq types	2016-01-27 08:56:24 -08:00
am43xx-clocks.dtsi	ARM: dts: am4372: fix clock source for arm twd and global timers	2015-12-09 16:46:25 -08:00
am57xx-beagle-x15.dts	Device tree changes for omaps for v4.5 merge window:	2015-12-12 00:32:07 +01:00
am57xx-cl-som-am57x.dts	ARM: dts: am57xx: sbc-am57x: correct Eth PHY settings	2016-01-27 09:19:31 -08:00
am57xx-sbc-am57x.dts	ARM: dts: am57xx: sbc-am57x: fix UART3 pinmux	2016-01-27 09:19:31 -08:00
am335x-baltos-ir5221.dts	ARM: dts: am335x-baltos-ir5221: Use AM33XX_IOPAD pinmux macro	2015-11-30 08:43:20 -08:00
am335x-base0033.dts	ARM: dts: am335x-base0033: Use IOPAD pinmux macro	2015-10-20 09:28:04 -07:00
am335x-bone-common.dtsi	regulator: tps65217: remove tps65217.dtsi file	2015-11-30 14:03:47 -08:00
am335x-bone.dts	ARM: dts: am335x-bone-common: enable aes and sham	2015-03-06 08:56:01 -08:00
am335x-boneblack.dts	ARM: dts: am335x-boneblack: Use pinctrl constants and AM33XX_IOPAD macro	2015-11-30 08:48:52 -08:00
am335x-bonegreen.dts	ARM: dts: am335x-bonegreen: Use AM33XX_IOPAD pinmux macro	2015-11-30 08:43:20 -08:00
am335x-chiliboard.dts	ARM: dts: am335x-chiliboard: Use AM33XX_IOPAD pinmux macro	2015-11-30 08:43:21 -08:00
am335x-chilisom.dtsi	regulator: tps65217: remove tps65217.dtsi file	2015-11-30 14:03:47 -08:00
am335x-cm-t335.dts	ARM: dts: cm-t335: add support for bluetooth	2015-12-17 10:04:22 -08:00
am335x-evm.dts	ARM: dts: am335x: replace gpio-key,wakeup with wakeup-source property	2015-12-17 09:51:48 -08:00
am335x-evmsk.dts	ARM: dts: am335x: replace gpio-key,wakeup with wakeup-source property	2015-12-17 09:51:48 -08:00
am335x-igep0033.dtsi	ARM: dts: am335x-igep0033: Use IOPAD pinmux macro	2015-10-20 09:28:04 -07:00
am335x-lxm.dts	ARM: dts: am335x-lxm: Use AM33XX_IOPAD pinmux macro	2015-11-30 08:43:22 -08:00
am335x-nano.dts	regulator: tps65217: remove tps65217.dtsi file	2015-11-30 14:03:47 -08:00
am335x-pepper.dts	ARM: dts: am335x: replace gpio-key,wakeup with wakeup-source property	2015-12-17 09:51:48 -08:00
am335x-phycore-som.dtsi	ARM: dts: am335x-phycore-som: Use AM33XX_IOPAD pinmux macro	2015-11-30 08:43:23 -08:00
am335x-sbc-t335.dts	ARM: dts: cm-t335: add support for DVI/LCD	2015-12-17 10:04:22 -08:00
am335x-shc.dts	arm, am335x: add support for the bosch shc board	2015-11-30 14:03:47 -08:00
am335x-sl50.dts	regulator: tps65217: remove tps65217.dtsi file	2015-11-30 14:03:47 -08:00
am335x-wega-rdk.dts	ARM: dts: Add phyBOARD-WEGA-AM335x rdk	2015-07-21 03:58:26 -07:00
am335x-wega.dtsi	ARM: dts: am335x-wega: Use AM33XX_IOPAD pinmux macro	2015-11-30 08:43:23 -08:00
am437x-cm-t43.dts	ARM: dts: am437x: cm-t43: add touchscreen support	2015-12-03 08:12:59 -08:00
am437x-gp-evm.dts	ARM: dts: am437x: pixcir_tangoc: use correct flags for irq types	2016-01-27 08:56:24 -08:00
am437x-idk-evm.dts	ARM: dts: am437x-idk-evm: Use AM4372_IOPAD pinmux macro	2015-11-30 08:43:24 -08:00
am437x-sbc-t43.dts	ARM: dts: am437x: cm-t43: add lcd support	2015-12-03 08:13:32 -08:00
am437x-sk-evm.dts	ARM: dts: am437x-sk-evm: Use AM4372_IOPAD pinmux macro	2015-11-30 08:43:25 -08:00
am3517-craneboard.dts	ARM: dts: am3517-craneboard: Use OMAP3_CORE1_IOPAD pinmux macro	2015-11-30 08:43:24 -08:00
am3517-evm.dts
am3517.dtsi	ARM: dts: add core2 padconf region for am3517	2015-05-20 10:10:43 -07:00
am3517_mt_ventoux.dts
am4372.dtsi	ARM: dts: am4372: fix irq type for arm twd and global timer	2016-01-27 08:47:13 -08:00
animeo_ip.dts	ARM: at91/dt: replace gpio-key,wakeup with wakeup-source property	2015-11-16 15:53:04 +01:00
arm-realview-pb11mp.dts	ARM: realview: set up cache correctly on the PB11MPCore	2015-12-31 16:49:17 +01:00
arm-realview-pb1176.dts	ARM: dts: update syscons to use simple-mfd	2015-05-11 08:55:03 +02:00
armada-38x-solidrun-microsom.dtsi	ARM: dts: Add SolidRun Armada 388 Clearfog A1 DT file	2015-12-08 17:58:01 +01:00
armada-38x.dtsi	mvebu: dts: enable IP checksum with jumbo frames for Armada 38x on Port0	2015-12-02 23:35:05 -05:00
armada-39x.dtsi	ARM: mvebu: use DT properties to fine-tune the L2 configuration	2015-07-09 14:25:28 +02:00
armada-370-db.dts	ARM: mvebu: define crypto SRAM ranges for all armada-370 boards	2015-09-29 16:18:41 +02:00
armada-370-dlink-dns327l.dts	ARM: mvebu: define crypto SRAM ranges for all armada-370 boards	2015-09-29 16:18:41 +02:00
armada-370-mirabox.dts	ARM: mvebu: define crypto SRAM ranges for all armada-370 boards	2015-09-29 16:18:41 +02:00
armada-370-netgear-rn102.dts	ARM: dts: armada: replace isil, irq2-can-wakeup-machine with wakeup-source property	2015-12-15 17:55:35 +01:00
armada-370-netgear-rn104.dts	ARM: dts: armada: replace isil, irq2-can-wakeup-machine with wakeup-source property	2015-12-15 17:55:35 +01:00
armada-370-rd.dts	ARM: mvebu: define crypto SRAM ranges for all armada-370 boards	2015-09-29 16:18:41 +02:00
armada-370-seagate-nas-2bay.dts	ARM: mvebu: add DT support for Seagate NAS 2 and 4-Bay	2015-10-12 16:45:35 +02:00
armada-370-seagate-nas-4bay.dts	ARM: mvebu: add DT support for Seagate NAS 2 and 4-Bay	2015-10-12 16:45:35 +02:00
armada-370-seagate-nas-xbay.dtsi	ARM: mvebu: add DT support for Seagate NAS 2 and 4-Bay	2015-10-12 16:45:35 +02:00
armada-370-seagate-personal-cloud-2bay.dts	ARM: mvebu: add DT support for Seagate Personal Cloud	2015-10-12 16:48:00 +02:00
armada-370-seagate-personal-cloud.dts	ARM: mvebu: add DT support for Seagate Personal Cloud	2015-10-12 16:48:00 +02:00
armada-370-seagate-personal-cloud.dtsi	ARM: mvebu: add DT support for Seagate Personal Cloud	2015-10-12 16:48:00 +02:00
armada-370-synology-ds213j.dts	ARM: mvebu: define crypto SRAM ranges for all armada-370 boards	2015-09-29 16:18:41 +02:00
armada-370-xp.dtsi	Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net	2015-07-01 14:58:07 -07:00
armada-370.dtsi	ARM: mvebu: add crypto related nodes to armada 370 dtsi	2015-09-29 16:17:43 +02:00
armada-375-db.dts	ARM: mvebu: define crypto SRAM ranges in armada-375-db.dts	2015-09-29 16:19:32 +02:00
armada-375.dtsi	ARM: mvebu: add crypto related nodes to armada 375 dtsi	2015-09-29 16:19:11 +02:00
armada-380.dtsi	ARM: mvebu: armada-380: Relicense the device tree under GPLv2+/X11	2015-01-26 19:28:12 -06:00
armada-385-db-ap.dts	ARM: DT updates for v4.4	2015-11-10 15:06:26 -08:00
armada-385-linksys-caiman.dts	ARM: mvebu: add support for the new Armada 385 based Linksys boards	2015-05-25 16:42:03 +02:00
armada-385-linksys-cobra.dts	ARM: mvebu: add support for the new Armada 385 based Linksys boards	2015-05-25 16:42:03 +02:00
armada-385-linksys.dtsi	ARM: mvebu: define crypto SRAM ranges for all armada-38x boards	2015-10-09 17:08:00 +02:00
armada-385.dtsi	ARM: mvebu: armada-385: Relicense the device tree under GPLv2+/X11	2015-01-26 19:28:12 -06:00
armada-388-clearfog.dts	ARM: dts: Add SolidRun Armada 388 Clearfog A1 DT file	2015-12-08 17:58:01 +01:00
armada-388-db.dts	ARM: mvebu: define crypto SRAM ranges for all armada-38x boards	2015-10-09 17:08:00 +02:00
armada-388-gp.dts	ARM: dts: armada-38x: use regulator-boot-on for SATA regulators on Armada 388 GP	2016-02-09 10:59:58 +01:00
armada-388-rd.dts	ARM: mvebu: define crypto SRAM ranges for all armada-38x boards	2015-10-09 17:08:00 +02:00
armada-388.dtsi	ARM: mvebu: Add Device Tree description of the Armada 388 SoC	2015-01-09 09:16:05 -06:00
armada-390.dtsi	ARM: mvebu: add Device Tree files for Armada 39x SoC and board	2015-03-04 15:42:34 +01:00
armada-398-db.dts	ARM: mvebu: add "jedec,spi-nor" flash compatible binding	2015-05-25 16:53:40 +02:00
armada-398.dtsi	ARM: mvebu: add Device Tree files for Armada 39x SoC and board	2015-03-04 15:42:34 +01:00
armada-xp-axpwifiap.dts	ARM: mvebu: define crypto SRAM ranges for all armada-xp boards	2015-09-29 16:16:11 +02:00
armada-xp-db.dts	ARM: mvebu: define crypto SRAM ranges for all armada-xp boards	2015-09-29 16:16:11 +02:00
armada-xp-gp.dts	ARM: mvebu: define crypto SRAM ranges for all armada-xp boards	2015-09-29 16:16:11 +02:00
armada-xp-lenovo-ix4-300d.dts	ARM: mvebu: ix4-300d: Add compatible property to "partitions" node	2016-01-25 13:16:04 +01:00
armada-xp-linksys-mamba.dts	ARM: mvebu: define crypto SRAM ranges for all armada-xp boards	2015-09-29 16:16:11 +02:00
armada-xp-matrix.dts	ARM: mvebu: define crypto SRAM ranges for all armada-xp boards	2015-09-29 16:16:11 +02:00
armada-xp-mv78230.dtsi	ARM: mvebu: armada-xp-mv78230: Relicense the device tree under GPLv2+/X11	2015-01-26 19:28:13 -06:00
armada-xp-mv78260.dtsi	ARM: mvebu: update Ethernet compatible string for Armada XP	2015-06-30 09:37:09 -07:00
armada-xp-mv78460.dtsi	ARM: mvebu: update Ethernet compatible string for Armada XP	2015-06-30 09:37:09 -07:00
armada-xp-netgear-rn2120.dts	ARM: dts: armada: replace isil, irq2-can-wakeup-machine with wakeup-source property	2015-12-15 17:55:35 +01:00
armada-xp-openblocks-ax3-4.dts	ARM: mvebu: define crypto SRAM ranges for all armada-xp boards	2015-09-29 16:16:11 +02:00
armada-xp-synology-ds414.dts	ARM: mvebu: define crypto SRAM ranges for all armada-xp boards	2015-09-29 16:16:11 +02:00
armada-xp.dtsi	ARM: mvebu: add crypto related nodes to armada-xp.dtsi	2015-09-29 15:45:43 +02:00
armv7-m.dtsi	ARM: dts: Add ARM System timer as clocksource in armv7m	2015-05-15 22:16:48 +02:00
at91-ariag25.dts
at91-ariettag25.dts	ARM: at91/dt: Add Acme Arietta G25	2015-06-04 11:48:43 +02:00
at91-cosino.dtsi
at91-cosino_mega2560.dts
at91-foxg20.dts	ARM: at91/dt: replace gpio-key,wakeup with wakeup-source property	2015-11-16 15:53:04 +01:00
at91-kizbox.dts	ARM: at91/dt: remove leftovers clock definition	2015-11-16 15:53:05 +01:00
at91-kizbox2.dts	ARM: at91/dt: replace gpio-key,wakeup with wakeup-source property	2015-11-16 15:53:04 +01:00
at91-kizboxmini.dts	ARM: at91/dt: replace gpio-key,wakeup with wakeup-source property	2015-11-16 15:53:04 +01:00
at91-qil_a9260.dts	ARM: at91/dt: replace gpio-key,wakeup with wakeup-source property	2015-11-16 15:53:04 +01:00
at91-sama5d2_xplained.dts	ARM: dts: at91: sama5d2 xplained: add phy address and IRQ for macb0	2016-01-27 11:14:22 +01:00
at91-sama5d3_xplained.dts	ARM: at91/dt: replace gpio-key,wakeup with wakeup-source property	2015-11-16 15:53:04 +01:00
at91-sama5d4_ma5d4.dtsi	ARM: at91/dt: sama5d4: Add support for DENX MA5D4 SoM and EVK	2015-12-15 11:07:26 +01:00
at91-sama5d4_ma5d4evk.dts	ARM: at91/dt: sama5d4: Add support for DENX MA5D4 SoM and EVK	2015-12-15 11:07:26 +01:00
at91-sama5d4_xplained.dts	ARM: dts: at91: sama5d4 xplained: fix phy0 IRQ type	2016-01-27 11:14:25 +01:00
at91-sama5d4ek.dts	ARM: dts: at91: sama5d4ek: add phy address and IRQ for macb0	2016-01-27 11:14:23 +01:00
at91-vinco.dts	ARM: at91/dt: Add Support for the L+G VInCo platform	2015-12-21 15:19:04 +01:00
at91rm9200.dtsi	ARM: at91/dt: fix "disabled" property on at91rm9200	2015-10-19 17:57:41 +02:00
at91rm9200_pqfp.dtsi
at91rm9200ek.dts	ARM: at91/dt: remove leftovers clock definition	2015-11-16 15:53:05 +01:00
at91sam9g15.dtsi	ARM: at91/dt: include lcd dtsi in at91sam9x5 dtsis	2015-08-07 17:33:06 +02:00
at91sam9g15ek.dts	ARM: at91/dt: enable lcd support for at91sam9x5 SoCs	2015-08-07 17:33:47 +02:00
at91sam9g20.dtsi	ARM: at91/dt: add SRAM nodes	2015-01-15 15:32:30 +01:00
at91sam9g20ek.dts
at91sam9g20ek_2mmc.dts
at91sam9g20ek_common.dtsi	ARM: at91/dt: remove leftovers clock definition	2015-11-16 15:53:05 +01:00
at91sam9g25.dtsi	ARM: at91: at91sam9x5/dts: add ISI dt support, include isi node, pinctrls	2015-03-04 18:36:07 +01:00
at91sam9g25ek.dts	ARM: at91: at91sam9g25ek/dts: enable ISI and ov2640	2015-03-04 18:36:08 +01:00
at91sam9g35.dtsi	ARM: at91/dt: include lcd dtsi in at91sam9x5 dtsis	2015-08-07 17:33:06 +02:00
at91sam9g35ek.dts	ARM: at91/dt: enable lcd support for at91sam9x5 SoCs	2015-08-07 17:33:47 +02:00
at91sam9g45.dtsi	ARM: at91/dt: use syscon for PMC	2015-10-19 17:57:41 +02:00
at91sam9m10g45ek.dts	ARM: at91/dt: remove leftovers clock definition	2015-11-16 15:53:05 +01:00
at91sam9n12.dtsi	ARM: at91/dt: use syscon for PMC	2015-10-19 17:57:41 +02:00
at91sam9n12ek.dts	ARM: dts: at91: at91sam9n12ek: fix panel compatible string	2016-01-27 11:13:11 +01:00
at91sam9rl.dtsi	ARM: at91/dt: use syscon for PMC	2015-10-19 17:57:41 +02:00
at91sam9rlek.dts	ARM: at91/dt: remove leftovers clock definition	2015-11-16 15:53:05 +01:00
at91sam9x5.dtsi	ARM: at91/dt: use syscon for PMC	2015-10-19 17:57:41 +02:00
at91sam9x5_can.dtsi
at91sam9x5_isi.dtsi	ARM: at91: at91sam9x5/dts: add ISI dt support, include isi node, pinctrls	2015-03-04 18:36:07 +01:00
at91sam9x5_lcd.dtsi	ARM: at91/dt: define hlcdc node in at91sam9x5_lcd.dtsi	2015-08-07 17:32:45 +02:00
at91sam9x5_macb0.dtsi	ARM: at91/dt: fix macb compatible strings	2015-03-07 22:31:21 -05:00
at91sam9x5_macb1.dtsi	ARM: at91/dt: fix macb compatible strings	2015-03-07 22:31:21 -05:00
at91sam9x5_usart3.dtsi
at91sam9x5cm.dtsi	ARM: at91/dt: remove leftovers clock definition	2015-11-16 15:53:05 +01:00
at91sam9x5dm.dtsi	ARM: at91/dt: at91sam9x5dm: add QT1070 touch button controller	2015-08-07 17:33:54 +02:00
at91sam9x5ek.dtsi	ARM: at91/dt: ov2640: add hsync/vsync-active property	2015-09-21 16:20:25 +02:00
at91sam9x25.dtsi
at91sam9x25ek.dts
at91sam9x35.dtsi	ARM: at91/dt: include lcd dtsi in at91sam9x5 dtsis	2015-08-07 17:33:06 +02:00
at91sam9x35ek.dts	ARM: at91/dt: enable lcd support for at91sam9x5 SoCs	2015-08-07 17:33:47 +02:00
at91sam9xe.dtsi	ARM: at91/dt: Add a dtsi for at91sam9xe	2015-01-15 15:33:20 +01:00
at91sam9260.dtsi	ARM: at91/dt: use syscon for PMC	2015-10-19 17:57:41 +02:00
at91sam9261.dtsi	ARM: at91/dt: use syscon for PMC	2015-10-19 17:57:41 +02:00
at91sam9261ek.dts	ARM: at91/dt: remove leftovers clock definition	2015-11-16 15:53:05 +01:00
at91sam9263.dtsi	ARM: at91/dt: use syscon for PMC	2015-10-19 17:57:41 +02:00
at91sam9263ek.dts	ARM: at91/dt: remove leftovers clock definition	2015-11-16 15:53:05 +01:00
atlas6-evb.dts
atlas6.dtsi	ARM: dts: atlas6: add resets property for SPI nodes	2014-11-25 18:46:43 +08:00
atlas7-evb.dts	ARM: dts: atlas7: add a GPIO key for rearview button	2015-08-05 22:44:21 +08:00
atlas7.dtsi	ARM: dts: atlas7: put pinctl property to get pinmux for NAND	2015-08-05 22:44:21 +08:00
axm55xx.dtsi
axm5516-amarillo.dts
axm5516-cpus.dtsi
axp22x.dtsi	ARM: dts: sunxi: Add dtsi for AXP22x PMIC	2015-10-12 11:27:10 +02:00
axp152.dtsi	ARM: dts: axp152: Add a dtsi file for the axp152 pmic	2015-07-09 10:10:05 +02:00
axp209.dtsi	ARM: dts: axp209: Add usb_power_supply child node to the ax209 node	2015-09-29 09:52:50 +02:00
bcm-cygnus-clock.dtsi	ARM: dts: enable clock support for Broadcom Cygnus	2015-07-07 18:08:18 -07:00
bcm-cygnus.dtsi	ARM: dts: Enable MSI support for Broadcom Cygnus	2015-12-07 14:14:40 -08:00
bcm-nsp.dtsi	ARM: dts: Add SMP support for Broadcom NSP	2015-12-07 12:26:54 -08:00
bcm9hmidc.dtsi	ARM: dts: enable touchscreen support on Cygnus	2015-09-22 17:50:36 -07:00
bcm283x.dtsi	ARM: bcm2835: Add the auxiliary clocks to the device tree.	2015-12-31 17:17:01 +01:00
bcm2835-rpi-a-plus.dts	ARM: bcm2835: Move the CPU/peripheral include out of common RPi DT.	2015-12-31 17:16:59 +01:00
bcm2835-rpi-b-plus.dts	ARM: bcm2835: Move the CPU/peripheral include out of common RPi DT.	2015-12-31 17:16:59 +01:00
bcm2835-rpi-b-rev2.dts	ARM: bcm2835: Move the CPU/peripheral include out of common RPi DT.	2015-12-31 17:16:59 +01:00
bcm2835-rpi-b.dts	ARM: bcm2835: Move the CPU/peripheral include out of common RPi DT.	2015-12-31 17:16:59 +01:00
bcm2835-rpi.dtsi	ARM: bcm2835: Move the CPU/peripheral include out of common RPi DT.	2015-12-31 17:16:59 +01:00
bcm2835.dtsi	ARM: bcm2835: Split the DT for peripherals from the DT for the CPU	2015-12-31 17:16:58 +01:00
bcm2836-rpi-2-b.dts	ARM: bcm2835: Add devicetree for bcm2836 and Raspberry Pi 2 B	2015-12-31 17:17:00 +01:00
bcm2836.dtsi	ARM: bcm2835: Add devicetree for bcm2836 and Raspberry Pi 2 B	2015-12-31 17:17:00 +01:00
bcm4708-asus-rt-ac56u.dts	ARM: BCM5301X: add NAND flash chip description	2015-06-06 16:05:50 -07:00
bcm4708-asus-rt-ac68u.dts	ARM: BCM5301X: add NAND flash chip description	2015-06-06 16:05:50 -07:00
bcm4708-buffalo-wzr-1750dhp.dts	ARM: BCM5301X: Enable UART0 on tested devices	2015-07-07 18:08:57 -07:00
bcm4708-luxul-xwc-1000.dts	ARM: BCM5301X: Enable UART0 on tested devices	2015-07-07 18:08:57 -07:00
bcm4708-netgear-r6250.dts	ARM: BCM5301X: Netgear R6250 add USB GPIO	2015-09-21 10:36:53 -07:00
bcm4708-netgear-r6300-v2.dts	ARM: BCM5301X: add NAND flash chip description	2015-06-06 16:05:50 -07:00
bcm4708-smartrg-sr400ac.dts	ARM: BCM5301X: Enable UART0 on tested devices	2015-07-07 18:08:57 -07:00
bcm4708.dtsi	ARM: BCM: Add SMP support for Broadcom 4708	2015-12-07 12:30:51 -08:00
bcm4709-asus-rt-ac87u.dts	ARM: BCM5301X: add NAND flash chip description for Asus RT-AC87U	2015-09-14 15:48:03 -07:00
bcm4709-buffalo-wxr-1900dhp.dts	ARM: BCM5301X: add NAND flash chip description	2015-06-06 16:05:50 -07:00
bcm4709-netgear-r7000.dts	ARM: BCM5301X: Add DT for Netgear R7000	2015-09-14 15:48:03 -07:00
bcm4709-netgear-r8000.dts	ARM: BCM5301X: Add missing Netgear R8000 LEDs	2015-12-06 19:45:17 -08:00
bcm5301x-nand-cs0-bch8.dtsi	ARM: BCM5301X: add NAND flash chip description	2015-06-06 16:05:50 -07:00
bcm5301x.dtsi	ARM: dts: enable clock support for BCM5301X	2015-11-20 10:14:31 -08:00
bcm7445-bcm97445svmb.dts	ARM: bcm7445: add NAND to DTS	2015-05-13 10:56:22 -07:00
bcm7445.dtsi	ARM: dts: brcmstb: add BCM7445 system PM DT nodes	2015-09-14 15:48:05 -07:00
bcm11351.dtsi	ARM: BCM: Clean up SMP support for Broadcom Kona	2015-12-07 12:30:17 -08:00
bcm21664-garnet.dts
bcm21664.dtsi	ARM: BCM: Clean up SMP support for Broadcom Kona	2015-12-07 12:30:17 -08:00
bcm28155-ap.dts
bcm47081-asus-rt-n18u.dts	ARM: BCM5301X: add NAND flash chip description	2015-06-06 16:05:50 -07:00
bcm47081-buffalo-wzr-600dhp2.dts	ARM: BCM5301X: Enable UART0 on tested devices	2015-07-07 18:08:57 -07:00
bcm47081-buffalo-wzr-900dhp.dts	ARM: BCM5301X: add NAND flash chip description	2015-06-06 16:05:50 -07:00
bcm47081.dtsi	ARM: BCM5301X: Add DT for Asus RT-N18U	2014-12-04 20:58:08 +01:00
bcm59056.dtsi
bcm63138.dtsi	ARM: dts: BCM63xx: Add ARMPLL device tree nodes	2015-12-06 19:45:17 -08:00
bcm94708.dts	ARM: dts: bcm5301x: Add BCM SVK DT files	2015-11-16 10:48:59 -08:00
bcm94709.dts	ARM: dts: bcm5301x: Add BCM SVK DT files	2015-11-16 10:48:59 -08:00
bcm911360_entphn.dts	ARM: dts: Enable NAND support on bcm911360_entphn	2015-09-22 17:50:36 -07:00
bcm911360k.dts	ARM: dts: move aliases back to .dts in Cygnus	2015-09-24 18:30:10 -07:00
bcm953012k.dts	ARM: dts: bcm5301x: Add BCM SVK DT files	2015-11-16 10:48:59 -08:00
bcm958300k.dts	ARM: dts: move aliases back to .dts in Cygnus	2015-09-24 18:30:10 -07:00
bcm958305k.dts	ARM: dts: move aliases back to .dts in Cygnus	2015-09-24 18:30:10 -07:00
bcm958625k.dts	ARM: dts: enable pinctrl for Broadcom NSP	2015-12-06 19:45:19 -08:00
bcm963138dvt.dts	ARM: bcm63138: add NAND DT support	2015-05-13 10:56:46 -07:00
berlin2-sony-nsz-gs7.dts	arm: dts: berlin: use stdout-path	2015-09-20 12:50:40 +02:00
berlin2.dtsi	arm: dts: berlin2: add watchdog nodes	2015-11-28 12:28:04 +01:00
berlin2cd-google-chromecast.dts	arm: dts: berlin: use stdout-path	2015-09-20 12:50:40 +02:00
berlin2cd.dtsi	arm: dts: berlin2cd: add watchdog nodes	2015-11-28 12:28:00 +01:00
berlin2q-marvell-dmp.dts	arm: dts: berlin2q-marvell-dmp: add sdhci1 fully functionality	2015-12-06 10:26:55 +01:00
berlin2q.dtsi	ARM: DT updates for v4.5	2016-01-20 18:16:29 -08:00
compulab-sb-som.dtsi	ARM: dts: am57xx: compulab-sb-som: add HDMI connector	2015-12-03 08:20:14 -08:00
cros-adc-thermistors.dtsi
cros-ec-keyboard.dtsi	ARM: dts: cros-ec-keyboard: Add support for some Japanese keys	2015-07-13 23:44:44 +02:00
cros-ec-sbs.dtsi	ARM: dts: Add sbs-battery dts fragment used by chromebooks	2015-07-15 15:55:19 +02:00
cx92755.dtsi	ARM: digicolor: add pinctrl module device node	2015-10-15 22:37:08 +02:00
cx92755_equinox.dts	ARM: digicolor: dts: add uart pin configuration	2015-10-15 22:37:15 +02:00
da850-enbw-cmc.dts	ARM: DTS: da850: Enable eDMA1	2015-12-24 16:32:14 +05:30
da850-evm.dts	ARM: DTS: da850: Enable eDMA1	2015-12-24 16:32:14 +05:30
da850.dtsi	ARM: DTS: da850: Enable DMA for SPI1	2015-12-24 16:32:14 +05:30
dm814x-clocks.dtsi	ARM: dts: Fix some mux and divider clocks to get dm814x-evm booting	2015-12-09 16:53:46 -08:00
dm814x.dtsi	ARM: dts: Add usb support for dm814x and dra62x	2015-12-22 16:01:11 -08:00
dm816x-clocks.dtsi	ARM: dts: Add basic clocks for dm816x	2015-01-19 11:47:35 -08:00
dm816x.dtsi	ARM: DT updates for v4.5	2016-01-20 18:16:29 -08:00
dm8148-evm.dts	ARM: dts: Add usb support for dm814x-evm	2015-12-22 16:01:16 -08:00
dm8148-t410.dts	ARM: dts: Add usb support for hp t410	2015-12-22 16:01:37 -08:00
dm8168-evm.dts	ARM: DT updates for v4.1	2015-04-22 09:09:46 -07:00
dove-cm-a510.dtsi	ARM: dts: dove: Add proper support for Compulab CM-A510/SBC-A510	2015-05-11 14:56:54 +02:00
dove-cubox-es.dts
dove-cubox.dts	ARM: dts: enable GPU for SolidRun's Cubox	2015-12-15 17:46:34 +01:00
dove-d2plug.dts
dove-d3plug.dts
dove-dove-db.dts
dove-sbc-a510.dts	ARM: dts: dove: Add proper support for Compulab CM-A510/SBC-A510	2015-05-11 14:56:54 +02:00
dove.dtsi	ARM: dts: dove: add DT GPU support	2015-12-15 17:46:16 +01:00
dra7-evm.dts	ARM: dts: DRA7-EVM: Add regulator-allow-bypass property for ldo9	2015-12-18 08:43:30 -08:00
dra7.dtsi	Second set of omap device tree changes for v4.5 merge window. This series	2015-12-22 14:55:02 -08:00
dra7xx-clocks.dtsi	arm/dts: dra7xx: add 'ti,set-rate-parent' for dss_dss_clk	2015-06-04 09:01:23 +03:00
dra62x-clocks.dtsi	ARM: dts: Add basic support for dra62x j5-eco SoC	2015-12-22 16:00:20 -08:00
dra62x-j5eco-evm.dts	ARM: dts: Add usb support for j5-eco evm	2015-12-22 16:01:41 -08:00
dra62x.dtsi	ARM: dts: Add basic support for dra62x j5-eco SoC	2015-12-22 16:00:20 -08:00
dra72-evm.dts	ARM: dts: DRA72-EVM: Add regulator-allow-bypass property for ldo1 and ldo2	2015-12-18 08:43:04 -08:00
dra72x.dtsi	ARM: dts: DRA72x: Add IPC sub-mailbox nodes for IPU1, IPU2 & DSP1	2015-10-12 15:00:37 -07:00
dra74x.dtsi	ARM: dts: DRA74x: Add IOMMU nodes for DSP2	2015-10-12 15:53:47 -07:00
ea3250.dts	arm: dts: lpc32xx: move USB controller subdevices into own device node	2015-11-18 18:01:27 +02:00
ecx-2000.dts
ecx-common.dtsi
efm32gg-dk3750.dts	ARM: efm32: switch to properly namespaced location property	2015-09-10 10:02:31 +02:00
efm32gg.dtsi	ARM: efm32: switch to vendor,device compatible strings	2015-09-10 10:02:38 +02:00
elpida_ecb240abacn.dtsi
emev2-kzm9d.dts	ARM: dts: fix gpio-keys wakeup-source property	2015-10-22 09:53:57 -07:00
emev2.dtsi	ARM: shmobile: emev2 dtsi: Use "arm,pl390" for GIC	2015-12-14 17:26:17 +09:00
ethernut5.dts	ARM: at91/dt: ethernut5: use at91sam9xe.dtsi	2015-01-15 15:33:21 +01:00
evk-pro3.dts
exynos4-cpu-thermal.dtsi	ARM: dts: define default thermal-zones for exynos4	2015-02-27 05:22:58 +09:00
exynos4.dtsi	Samsung DeviceTree updates and improvements for 4.5	2015-12-31 17:31:56 +01:00
exynos4x12-pinctrl.dtsi	ARM: dts: Add labels to exynos4 nodes	2015-06-03 09:56:21 +09:00
exynos4x12.dtsi	ARM: dts: Unify G2D device node with other devices on exynos4	2015-12-29 09:07:44 +09:00
exynos5.dtsi	ARM: dts: Add syscon-{reboot, poweroff} nodes for exynos5	2015-11-20 15:57:36 +09:00
exynos3250-monk.dts	ARM: dts: Add vbus regulator to USB2 phy nodes on exynos3250, exynos4210 and exynos4412 boards	2015-10-24 04:31:23 +09:00
exynos3250-pinctrl.dtsi
exynos3250-rinato.dts	ARM: dts: Add vbus regulator to USB2 phy nodes on exynos3250, exynos4210 and exynos4412 boards	2015-10-24 04:31:23 +09:00
exynos3250.dtsi	ARM: dts: Add syscon-{reboot, poweroff} nodes for exynos3250	2015-11-20 15:55:17 +09:00
exynos4210-origen.dts	ARM: dts: Unify G2D device node with other devices on exynos4	2015-12-29 09:07:44 +09:00
exynos4210-pinctrl.dtsi
exynos4210-smdkv310.dts	ARM: dts: Unify G2D device node with other devices on exynos4	2015-12-29 09:07:44 +09:00
exynos4210-trats.dts	ARM: dts: Add vbus regulator to USB2 phy nodes on exynos3250, exynos4210 and exynos4412 boards	2015-10-24 04:31:23 +09:00
exynos4210-universal_c210.dts	ARM: dts: exynos4210-universal_c210: Disable DMA for UARTs	2015-12-29 09:07:43 +09:00
exynos4210.dtsi	ARM: dts: Unify G2D device node with other devices on exynos4	2015-12-29 09:07:44 +09:00
exynos4212.dtsi	ARM: dts: add CPU OPP and regulator supply property for exynos4x12	2015-08-14 02:06:15 +09:00
exynos4412-odroid-common.dtsi	ARM: dts: Unify G2D device node with other devices on exynos4	2015-12-29 09:07:44 +09:00
exynos4412-odroidu3.dts	ARM: dts: Remove unneeded GPIO include in exynos4412-odroidu3	2015-12-29 09:07:43 +09:00
exynos4412-odroidx.dts	ARM: dts: Use GPIO constants for flags cells in exynos4412 boards	2015-10-08 07:39:58 +09:00
exynos4412-odroidx2.dts	ARM: dts: Switch Odroid X2/U2 to simple-audio-card	2015-02-09 14:18:20 +08:00
exynos4412-origen.dts	ARM: dts: Unify G2D device node with other devices on exynos4	2015-12-29 09:07:44 +09:00
exynos4412-smdk4412.dts	ARM: dts: Unify G2D device node with other devices on exynos4	2015-12-29 09:07:44 +09:00
exynos4412-tiny4412.dts	ARM: dts: Use GPIO constants for flags cells in exynos4412 boards	2015-10-08 07:39:58 +09:00
exynos4412-tmu-sensor-conf.dtsi	ARM: dts: add TMU default definitions for exynos4412	2015-02-27 05:22:56 +09:00
exynos4412-trats2.dts	ARM: dts: Enable PRNG module on exynos4412-trats2	2015-12-29 09:07:41 +09:00
exynos4412.dtsi	ARM: dts: exynos4412: Rename OPP nodes as opp@<opp-hz>	2015-11-23 23:39:49 +01:00
exynos4415-pinctrl.dtsi
exynos4415.dtsi	ARM: dts: add sysmmu nodes for exynos4415	2015-06-04 08:09:41 +09:00
exynos5250-arndale.dts	ARM: dts: Move display-timings node from fimd to dp in exynos5250-arndale, smdk5250 and smdk5420	2015-10-06 10:47:08 +09:00
exynos5250-pinctrl.dtsi	ARM: dts: Extend exynos5250-pinctrl nodes using labels instead of paths	2015-07-21 12:59:17 +09:00
exynos5250-smdk5250.dts	Merge branch 'next/arm64' into next/dt	2015-11-09 16:35:19 -08:00
exynos5250-snow-common.dtsi	ARM: dts: Mark eMMC as non-removable in exynos5250-snow-common	2015-12-29 09:07:10 +09:00
exynos5250-snow-rev5.dts	ARM: dts: Add Exynos5250 Snow Rev5+ support on exynos5250-snow-rev5	2015-09-30 15:54:14 +09:00
exynos5250-snow.dts	ARM: dts: Add Exynos5250 Snow Rev5+ support on exynos5250-snow-rev5	2015-09-30 15:54:14 +09:00
exynos5250-spring.dts	ARM: dts: add CPU OPP and regulator supply property for exynos5250	2015-08-14 02:06:02 +09:00
exynos5250.dtsi	ARM: dts: Add rotator node on exynos5250	2015-12-29 09:07:42 +09:00
exynos5260-pinctrl.dtsi
exynos5260-xyref5260.dts	ARM: Show proper respect for Heinrich Hertz by using the correct unit for frequency	2015-05-14 16:22:05 +01:00
exynos5260.dtsi
exynos5410-smdk5410.dts	ARM: dts: Clean up indentation for exynos5410-smdk5410	2015-07-21 12:55:00 +09:00
exynos5410.dtsi	ARM: dts: Add syscon-{reboot, poweroff} nodes for exynos5410	2015-11-20 15:58:44 +09:00
exynos5420-arndale-octa.dts	ARM: dts: Use GPIO constants for flags cells in exynos5420/5422/5800 boards	2015-10-08 07:39:58 +09:00
exynos5420-peach-pit.dts	ARM: dts: Remove broken-cd from eMMC node in exynos5420-peach-pi	2015-12-29 09:07:10 +09:00
exynos5420-pinctrl.dtsi	ARM: dts: Extend exynos5420-pinctrl nodes using labels instead of paths	2015-07-21 13:01:23 +09:00
exynos5420-smdk5420.dts	ARM: dts: Use GPIO constants for flags cells in exynos5420/5422/5800 boards	2015-10-08 07:39:58 +09:00
exynos5420-trip-points.dtsi	ARM: dts: Fix typo in trip point temperature for exynos5420/5440	2015-05-09 03:11:21 +09:00
exynos5420.dtsi	ARM: dts: Add rotator node on exynos5420	2015-12-29 09:07:42 +09:00
exynos5422-cpu-thermal.dtsi	ARM: dts: Define default thermal-zones for exynos5422	2015-07-21 12:56:59 +09:00
exynos5422-cpus.dtsi	ARM: dts: add exynos5422-cpus.dtsi to correct cpu order	2015-08-14 02:08:24 +09:00
exynos5422-odroidxu3-audio.dtsi	ARM: dts: Split audio configuration to separate exynos5422-odroidxu3-audio	2015-09-17 07:49:24 +09:00
exynos5422-odroidxu3-common.dtsi	ARM: dts: Remove fimd node from exynos5422-odroidxu3-common	2015-12-29 09:07:11 +09:00
exynos5422-odroidxu3-lite.dts	ARM: dts: Use peripheral mode for dwc3_1 on exynos5422-odroidxu3	2015-12-29 09:07:43 +09:00
exynos5422-odroidxu3.dts	ARM: dts: Use peripheral mode for dwc3_1 on exynos5422-odroidxu3	2015-12-29 09:07:43 +09:00
exynos5422-odroidxu4.dts	ARM: dts: Add support Odroid XU4 board for exynos5422-odroidxu4	2015-09-17 07:49:30 +09:00
exynos5440-sd5v1.dts	ARM: dts: Use labels for overriding nodes in exynos5440 boards	2015-06-03 09:56:52 +09:00
exynos5440-ssdk5440.dts	ARM: dts: Use GPIO constants for flags cells in exynos5440 boards	2015-10-08 07:39:58 +09:00
exynos5440-tmu-sensor-conf.dtsi	ARM: dts: Trip points and sensor configuration data for exynos5440	2015-02-27 05:22:58 +09:00
exynos5440-trip-points.dtsi	ARM: dts: Fix typo in trip point temperature for exynos5420/5440	2015-05-09 03:11:21 +09:00
exynos5440.dtsi	ARM: dts: Add labels to exynos5 nodes	2015-06-03 09:56:47 +09:00
exynos5800-peach-pi.dts	ARM: DT updates for v4.5	2016-01-20 18:16:29 -08:00
exynos5800.dtsi
ge863-pro3.dtsi
hi3620-hi4511.dts	ARM: hisilicon: DT: Drop console= and earlyprintk bootargs parameter	2015-10-09 17:05:57 +01:00
hi3620.dtsi
highbank.dts
hip01-ca9x2.dts	ARM: dts: Add hip01-ca9x2 dts file	2015-01-21 14:35:06 -08:00
hip01.dtsi	ARM: dts: Add hip01-ca9x2 dts file	2015-01-21 14:35:06 -08:00
hip04-d01.dts	ARM: hisi: revert changes from hisi/hip04-dt branch	2015-06-24 17:30:39 -07:00
hip04.dtsi	ARM: hisi: revert changes from hisi/hip04-dt branch	2015-06-24 17:30:39 -07:00
hisi-x5hd2-dkb.dts	ARM: hisilicon: DT: Drop console= and earlyprintk bootargs parameter	2015-10-09 17:05:57 +01:00
hisi-x5hd2.dtsi
imx1-ads.dts
imx1-apf9328.dts
imx1-pinfunc.h
imx1.dtsi
imx6dl-apf6dev.dts	ARM: dts: Armadeus Systems APF6 family support (i.MX6)	2015-06-03 15:04:00 +08:00
imx6dl-aristainetos2_4.dts	ARM: dts: imx6: add DT for aristainetos2 board	2015-06-03 15:04:34 +08:00
imx6dl-aristainetos2_7.dts	ARM: dts: imx6: add DT for aristainetos2 board	2015-06-03 15:04:34 +08:00
imx6dl-aristainetos_4.dts	ARM: dts: imx6dl-aristainetos: enable backlight PWM explicitly	2015-03-30 16:43:33 +08:00
imx6dl-aristainetos_7.dts	ARM: dts: imx6dl-aristainetos: enable backlight PWM explicitly	2015-03-30 16:43:33 +08:00
imx6dl-cubox-i.dts	ARM: dts: cubox-i/hummingboard: Fix the license text	2015-06-03 15:04:33 +08:00
imx6dl-dfi-fs700-m60.dts
imx6dl-gw51xx.dts
imx6dl-gw52xx.dts
imx6dl-gw53xx.dts
imx6dl-gw54xx.dts
imx6dl-gw551x.dts	ARM: dts: Gateworks GW5510 support (i.MX6)	2015-06-03 15:03:59 +08:00
imx6dl-gw552x.dts
imx6dl-hummingboard.dts	ARM: dts: cubox-i/hummingboard: Fix the license text	2015-06-03 15:04:33 +08:00
imx6dl-nit6xlite.dts	ARM: dts: imx: add Boundary Devices Nitrogen6_Lite board	2015-10-19 22:45:24 +08:00
imx6dl-nitrogen6x.dts	ARM: dts: imx6dl-nitrogen6x: change manufacturer to Boundary Devices	2015-10-19 22:45:23 +08:00
imx6dl-phytec-pbab01.dts
imx6dl-phytec-pfla02.dtsi
imx6dl-pinfunc.h
imx6dl-rex-basic.dts	ARM: dts: imx: add "jedec,spi-nor" flash compatible binding	2015-10-19 22:45:12 +08:00
imx6dl-riotboard.dts	dts: imx6: fix sd card gpio polarity specified in device tree	2015-07-24 10:18:35 +02:00
imx6dl-sabreauto.dts
imx6dl-sabrelite.dts	ARM: dts: imx6qdl-sabrelite: relicense under GPLv2/X11	2015-10-19 22:45:22 +08:00
imx6dl-sabresd.dts
imx6dl-tx6dl-comtft.dts
imx6dl-tx6u-801x.dts
imx6dl-tx6u-811x.dts
imx6dl-udoo.dts	ARM: dts: imx6dl-udoo: Add board support based off imx6q-udoo	2015-01-06 19:07:11 +08:00
imx6dl-wandboard-revb1.dts
imx6dl-wandboard.dts
imx6dl.dtsi	ARM: dts: imx6: add Vivante GPU nodes	2015-12-22 20:43:41 +08:00
imx6q-apf6dev.dts	ARM: dts: Armadeus Systems APF6 family support (i.MX6)	2015-06-03 15:04:00 +08:00
imx6q-arm2.dts	dts: imx6: fix sd card gpio polarity specified in device tree	2015-07-24 10:18:35 +02:00
imx6q-cm-fx6.dts
imx6q-cubox-i.dts	ARM: dts: cubox-i/hummingboard: Fix the license text	2015-06-03 15:04:33 +08:00
imx6q-dfi-fs700-m60.dts
imx6q-dmo-edmqmx6.dts	ARM: dts: imx: add "jedec,spi-nor" flash compatible binding	2015-10-19 22:45:12 +08:00
imx6q-gk802.dts	dts: imx6: fix sd card gpio polarity specified in device tree	2015-07-24 10:18:35 +02:00
imx6q-gw51xx.dts
imx6q-gw52xx.dts
imx6q-gw53xx.dts
imx6q-gw54xx.dts
imx6q-gw551x.dts	ARM: dts: Gateworks GW5510 support (i.MX6)	2015-06-03 15:03:59 +08:00
imx6q-gw552x.dts
imx6q-gw5400-a.dts	ARM: dts: imx6: Fix Ethernet PHY mode on Ventana boards	2015-12-15 16:53:15 +08:00
imx6q-hummingboard.dts	ARM: dts: cubox-i/hummingboard: Fix the license text	2015-06-03 15:04:33 +08:00
imx6q-nitrogen6_max.dts	ARM: dts: imx: add Boundary Devices Nitrogen6_Max board	2015-10-19 22:45:23 +08:00
imx6q-nitrogen6x.dts	ARM: dts: imx6q-nitrogen6x: change manufacturer to Boundary Devices	2015-10-19 22:45:22 +08:00
imx6q-novena.dts	ARM: dts: imx6q: add Novena board	2015-12-22 20:43:42 +08:00
imx6q-phytec-pbab01.dts
imx6q-phytec-pfla02.dtsi
imx6q-pinfunc.h
imx6q-rex-pro.dts	ARM: dts: imx: add "jedec,spi-nor" flash compatible binding	2015-10-19 22:45:12 +08:00
imx6q-sabreauto.dts
imx6q-sabrelite.dts	ARM: dts: imx6qdl-sabrelite: relicense under GPLv2/X11	2015-10-19 22:45:22 +08:00
imx6q-sabresd.dts
imx6q-sbc6x.dts
imx6q-tbs2910.dts	dts: imx6: fix sd card gpio polarity specified in device tree	2015-07-24 10:18:35 +02:00
imx6q-tx6q-1010-comtft.dts
imx6q-tx6q-1010.dts
imx6q-tx6q-1020-comtft.dts
imx6q-tx6q-1020.dts
imx6q-tx6q-1110.dts
imx6q-udoo.dts	ARM: dts: imx6dl-udoo: Add board support based off imx6q-udoo	2015-01-06 19:07:11 +08:00
imx6q-wandboard-revb1.dts
imx6q-wandboard.dts
imx6q.dtsi	ARM: dts: imx6q: clean up unused ipu2grp	2016-01-07 06:13:32 +01:00
imx6qdl-apf6.dtsi	ARM: dts: Armadeus Systems APF6 family support (i.MX6)	2015-06-03 15:04:00 +08:00
imx6qdl-apf6dev.dtsi	ARM: dts: Armadeus Systems APF6 family support (i.MX6)	2015-06-03 15:04:00 +08:00
imx6qdl-aristainetos.dtsi	ARM: dts: imx: add "jedec,spi-nor" flash compatible binding	2015-10-19 22:45:12 +08:00
imx6qdl-aristainetos2.dtsi	ARM: dts: imx: add "jedec,spi-nor" flash compatible binding	2015-10-19 22:45:12 +08:00
imx6qdl-cubox-i.dtsi	dts: imx6: fix sd card gpio polarity specified in device tree	2015-07-24 10:18:35 +02:00
imx6qdl-dfi-fs700-m60.dtsi	ARM: dts: imx: add "jedec,spi-nor" flash compatible binding	2015-10-19 22:45:12 +08:00
imx6qdl-gw51xx.dtsi	ARM: dts: imx: ventana: add PWM nodes for Ventana boards	2015-12-22 20:42:25 +08:00
imx6qdl-gw52xx.dtsi	ARM: dts: imx: ventana: Add SPI support for GW52xx	2015-12-22 20:42:25 +08:00
imx6qdl-gw53xx.dtsi	ARM: dts: imx: ventana: add PWM nodes for Ventana boards	2015-12-22 20:42:25 +08:00
imx6qdl-gw54xx.dtsi	ARM: dts: imx: ventana: add PWM nodes for Ventana boards	2015-12-22 20:42:25 +08:00
imx6qdl-gw551x.dtsi	ARM: dts: imx: ventana: add PWM nodes for Ventana boards	2015-12-22 20:42:25 +08:00
imx6qdl-gw552x.dtsi	ARM: dts: imx: ventana: add PWM nodes for Ventana boards	2015-12-22 20:42:25 +08:00
imx6qdl-hummingboard.dtsi	dts: imx6: fix sd card gpio polarity specified in device tree	2015-07-24 10:18:35 +02:00
imx6qdl-microsom-ar8035.dtsi	ARM: dts: cubox-i/hummingboard: Fix the license text	2015-06-03 15:04:33 +08:00
imx6qdl-microsom.dtsi	ARM: dts: cubox-i/hummingboard: Fix the license text	2015-06-03 15:04:33 +08:00
imx6qdl-nit6xlite.dtsi	ARM: dts: imx: add Boundary Devices Nitrogen6_Lite board	2015-10-19 22:45:24 +08:00
imx6qdl-nitrogen6_max.dtsi	ARM: dts: imx: add Boundary Devices Nitrogen6_Max board	2015-10-19 22:45:23 +08:00
imx6qdl-nitrogen6x.dtsi	ARM: dts: imx6qdl-nitrogen6x: relicense under GPLv2/X11	2015-10-19 22:45:21 +08:00
imx6qdl-phytec-pbab01.dtsi	ARM: dts: imx6: phyFLEX: Add CAN support	2014-11-23 15:08:15 +08:00
imx6qdl-phytec-pfla02.dtsi	ARM: dts: imx6: phyFLEX: fix typo in "pinctrl-names"	2015-10-19 22:45:42 +08:00
imx6qdl-rex.dtsi	ARM: dts: fix usb pin control for imx-rex dts	2015-09-24 05:13:40 -07:00
imx6qdl-sabreauto.dtsi	ARM: dts: imx: Fix the assigned-clock mismatch issue on imx6q/dl	2015-12-15 16:48:56 +08:00
imx6qdl-sabrelite.dtsi	ARM: dts: imx6qdl-sabrelite: relicense under GPLv2/X11	2015-10-19 22:45:22 +08:00
imx6qdl-sabresd.dtsi	ARM: dts: imx: add "jedec,spi-nor" flash compatible binding	2015-10-19 22:45:12 +08:00
imx6qdl-tx6.dtsi	Linux 4.3-rc3	2015-09-29 16:28:52 -07:00
imx6qdl-udoo.dtsi	ARM: dts: imx6dl-udoo: Add board support based off imx6q-udoo	2015-01-06 19:07:11 +08:00
imx6qdl-wandboard-revb1.dtsi
imx6qdl-wandboard-revc1.dtsi
imx6qdl-wandboard.dtsi	dts: imx6: fix sd card gpio polarity specified in device tree	2015-07-24 10:18:35 +02:00
imx6qdl.dtsi	ARM: dts: imx6: add Vivante GPU nodes	2015-12-22 20:43:41 +08:00
imx6sl-evk.dts	ARM: dts: imx: add "jedec,spi-nor" flash compatible binding	2015-10-19 22:45:12 +08:00
imx6sl-pinfunc.h
imx6sl-warp.dts	ARM: dts: imx6sl-warp: Add changes for rev1.12	2015-08-11 23:15:11 +08:00
imx6sl.dtsi	ARM: dts: imx6: Change the clock name for spba clock	2015-12-22 20:43:36 +08:00
imx6sx-pinfunc.h
imx6sx-sabreauto.dts	dts: imx6: fix sd card gpio polarity specified in device tree	2015-07-24 10:18:35 +02:00
imx6sx-sdb-reva.dts	ARM: dts: imx: add "jedec,spi-nor" flash compatible binding	2015-10-19 22:45:12 +08:00
imx6sx-sdb.dts	ARM: dts: imx: add "jedec,spi-nor" flash compatible binding	2015-10-19 22:45:12 +08:00
imx6sx-sdb.dtsi	ARM: imx6sx-sdb: Fix typo in regulator enable GPIO property	2015-10-19 22:45:43 +08:00
imx6sx.dtsi	ARM: dts: imx6: Change the clock name for spba clock	2015-12-22 20:43:36 +08:00
imx6ul-14x14-evk.dts	ARM: dts: imx6ul-14x14-evk.dts: add tsc support	2015-10-19 22:45:14 +08:00
imx6ul-pinfunc.h	ARM: dts: imx6ul: fix low case define in imx6ul-pinfunc.h	2015-08-11 23:15:20 +08:00
imx6ul.dtsi	ARM: dts: imx6ul: Add ADC support	2015-12-22 20:42:22 +08:00
imx7d-cl-som-imx7.dts	ARM: dts: imx7d: cl-som-imx7: add basic module support	2015-12-22 20:43:43 +08:00
imx7d-pinfunc.h	ARM: dts: imx7d-pinfunc: add gpio1 pad iomux settings	2015-10-19 22:45:17 +08:00
imx7d-sbc-imx7.dts	ARM: dts: imx7d: sbc-imx7: add basic board support	2015-12-22 20:43:43 +08:00
imx7d-sdb.dts	ARM: dts: imx7d-sdb: add ADC support	2015-12-22 20:43:39 +08:00
imx7d.dtsi	ARM: dts: imx7d.dtsi: add ADC support	2015-12-22 20:43:38 +08:00
imx23-evk.dts
imx23-olinuxino.dts	The i.MX device tree changes for 4.2:	2015-06-10 17:01:25 -07:00
imx23-pinfunc.h
imx23-stmp378x_devb.dts
imx23.dtsi	ARM: mxs: enable ocotp for i.MX23 and i.MX28	2015-10-19 22:45:12 +08:00
imx25-eukrea-cpuimx25.dtsi
imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts
imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts
imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts
imx25-eukrea-mbimxsd25-baseboard.dts
imx25-karo-tx25.dts
imx25-pdk.dts	dts: imx25: fix sd card gpio polarity specified in device tree	2015-07-24 10:18:36 +02:00
imx25-pinfunc.h	ARM: dts: imx25-pinfunc: add some more pin configurations	2015-12-22 20:42:22 +08:00
imx25.dtsi	ARM: dts: imx25: add alias for pwm nodes	2015-12-22 20:42:24 +08:00
imx27-apf27.dts
imx27-apf27dev.dts	apf27dev: add max5821 to the dts	2015-01-05 20:43:48 +08:00
imx27-eukrea-cpuimx27.dtsi
imx27-eukrea-mbimxsd27-baseboard.dts
imx27-pdk.dts
imx27-phytec-phycard-s-rdk.dts
imx27-phytec-phycard-s-som.dtsi
imx27-phytec-phycore-rdk.dts
imx27-phytec-phycore-som.dtsi
imx27-pinfunc.h
imx27.dtsi	ARM: dts: imx27.dtsi: change the clock information for usb	2015-11-18 14:07:54 +08:00
imx28-apf28.dts	ARM: dts: imx28-apf28: fix mac0 gpio polarity	2015-03-30 16:38:52 +08:00
imx28-apf28dev.dts	ARM: dts: imx28-apf28dev: add wakeup function to user button	2015-03-30 16:43:49 +08:00
imx28-apx4devkit.dts
imx28-cfa10036.dts	ARM: mxs: fix in tree users of ssd1306	2015-06-03 15:03:57 +08:00
imx28-cfa10037.dts
imx28-cfa10049.dts
imx28-cfa10055.dts
imx28-cfa10056.dts
imx28-cfa10057.dts	ARM: mxs: dt: cfa10057: fix backlight PWM	2015-12-22 20:43:38 +08:00
imx28-cfa10058.dts
imx28-duckbill.dts
imx28-eukrea-mbmx28lc.dtsi
imx28-eukrea-mbmx283lc.dts
imx28-eukrea-mbmx287lc.dts
imx28-evk.dts	ARM: dts: imx: add "jedec,spi-nor" flash compatible binding	2015-10-19 22:45:12 +08:00
imx28-m28.dtsi
imx28-m28cu3.dts
imx28-m28evk.dts	ARM: dts: imx: add "jedec,spi-nor" flash compatible binding	2015-10-19 22:45:12 +08:00
imx28-pinfunc.h
imx28-sps1.dts
imx28-tx28.dts	ARM: dts: set up trigger type for edt-ft5x06 interrupts	2015-09-27 17:34:01 -07:00
imx28.dtsi	ARM: dts: imx28: add alternate auart4 pinmux	2015-12-22 20:43:40 +08:00
imx31-bug.dts
imx31.dtsi	ARM: dts: i.MX31: fix cpu compatible value	2015-10-19 22:45:18 +08:00
imx35-eukrea-cpuimx35.dtsi
imx35-eukrea-mbimxsd35-baseboard.dts
imx35-pdk.dts
imx35-pinfunc.h
imx35.dtsi	ARM: dts: i.MX35: fix cpu compatible value	2015-10-19 22:45:19 +08:00
imx50-evk.dts	ARM: dts: imx: add "jedec,spi-nor" flash compatible binding	2015-10-19 22:45:12 +08:00
imx50-pinfunc.h
imx50.dtsi	ARM: dts: imx: Add dr_mode host setting to all host-only usb instances	2015-03-30 16:42:23 +08:00
imx51-apf51.dts
imx51-apf51dev.dts	dts: imx51: fix sd card gpio polarity specified in device tree	2015-07-24 10:18:34 +02:00
imx51-babbage.dts	ARM: dts: imx51-babbage: Fix ULPI PHY reset modelling	2015-01-06 20:25:58 +08:00
imx51-digi-connectcore-jsk.dts
imx51-digi-connectcore-som.dtsi
imx51-eukrea-cpuimx51.dtsi
imx51-eukrea-mbimxsd51-baseboard.dts
imx51-pinfunc.h
imx51-ts4800.dts	ARM: dts: TS-4800: add touchscreen support	2015-12-22 20:43:42 +08:00
imx51.dtsi	ARM: dts: imx: Add dr_mode host setting to all host-only usb instances	2015-03-30 16:42:23 +08:00
imx53-ard.dts	dts: imx53: fix sd card gpio polarity specified in device tree	2015-07-24 10:18:35 +02:00
imx53-m53.dtsi
imx53-m53evk.dts	dts: imx53: fix sd card gpio polarity specified in device tree	2015-07-24 10:18:35 +02:00
imx53-mba53.dts
imx53-pinfunc.h
imx53-qsb-common.dtsi	ARM: DT updates for v4.3	2015-09-01 13:09:20 -07:00
imx53-qsb.dts
imx53-qsrb.dts	ARM: imx53: qsrb: fix PMIC interrupt level	2015-09-17 08:54:13 +08:00
imx53-smd.dts	ARM: dts: imx: add "jedec,spi-nor" flash compatible binding	2015-10-19 22:45:12 +08:00
imx53-tqma53.dtsi	dts: imx53: fix sd card gpio polarity specified in device tree	2015-07-24 10:18:35 +02:00
imx53-tx53-x03x.dts	ARM: dts: set up trigger type for edt-ft5x06 interrupts	2015-09-27 17:34:01 -07:00
imx53-tx53-x13x.dts
imx53-tx53.dtsi	dts: imx53: fix sd card gpio polarity specified in device tree	2015-07-24 10:18:35 +02:00
imx53-voipac-bsb.dts	dts: imx53: fix sd card gpio polarity specified in device tree	2015-07-24 10:18:35 +02:00
imx53-voipac-dmm-668.dtsi
imx53.dtsi	ARM: imx53: include IRQ dt-bindings header	2015-09-17 08:54:13 +08:00
integrator.dtsi	ARM: dts: update syscons to use simple-mfd	2015-05-11 08:55:03 +02:00
integratorap.dts
integratorcp.dts
k2e-clocks.dtsi	ARM: dts: keystone: fix dt bindings to use post div register for mainpll	2015-07-31 22:30:11 +02:00
k2e-evm.dts	ARM: dts: keystone: Update SoC specific compatible flags	2015-10-06 09:51:09 -07:00
k2e-netcp.dtsi	ARM: dts: keystone: enable accumulator channels	2015-10-13 13:42:43 -07:00
k2e.dtsi	ARM: dts: keystone: Update SoC specific compatible flags	2015-10-06 09:51:09 -07:00
k2hk-clocks.dtsi	ARM: dts: keystone: fix dt bindings to use post div register for mainpll	2015-07-31 22:30:11 +02:00
k2hk-evm.dts	ARM: dts: keystone: Update SoC specific compatible flags	2015-10-06 09:51:09 -07:00
k2hk-netcp.dtsi	ARM: dts: keystone: enable accumulator channels	2015-10-13 13:42:43 -07:00
k2hk.dtsi	ARM: dts: keystone: Update SoC specific compatible flags	2015-10-06 09:51:09 -07:00
k2l-clocks.dtsi	ARM: dts: keystone: fix dt bindings to use post div register for mainpll	2015-07-31 22:30:11 +02:00
k2l-evm.dts	ARM: dts: keystone: Update SoC specific compatible flags	2015-10-06 09:51:09 -07:00
k2l-netcp.dtsi	ARM: dts: keystone: k2l: fix kernel crash when clk_ignore_unused is not in bootargs	2015-11-23 10:36:27 -08:00
k2l.dtsi	ARM: dts: keystone: Update SoC specific compatible flags	2015-10-06 09:51:09 -07:00
keystone-clocks.dtsi
keystone.dtsi	ARM: dts: keystone: Update SoC specific compatible flags	2015-10-06 09:51:09 -07:00
kirkwood-98dx4122.dtsi
kirkwood-6192.dtsi	ARM: dts: kirkwood: enable phy driver for SATA controller on 88f6192	2014-12-21 06:41:54 -06:00
kirkwood-6281.dtsi
kirkwood-6282.dtsi
kirkwood-b3.dts	ARM: kirkwood: add "jedec,spi-nor" flash compatible binding	2015-05-25 16:53:25 +02:00
kirkwood-blackarmor-nas220.dts	Kirkwood: add support for Seagate BlackArmor NAS220	2015-01-05 12:03:38 -06:00
kirkwood-cloudbox.dts	ARM: kirkwood: add "jedec,spi-nor" flash compatible binding	2015-05-25 16:53:25 +02:00
kirkwood-d2net.dts	ARM: Kirkwood: add modes-map property to ns2-leds nodes	2015-08-28 14:06:16 +02:00
kirkwood-db-88f6281.dts
kirkwood-db-88f6282.dts
kirkwood-db.dtsi
kirkwood-dir665.dts	ARM: kirkwood: add "jedec,spi-nor" flash compatible binding	2015-05-25 16:53:25 +02:00
kirkwood-dns320.dts
kirkwood-dns325.dts
kirkwood-dnskw.dtsi
kirkwood-dockstar.dts
kirkwood-dreamplug.dts	ARM: kirkwood: add "jedec,spi-nor" flash compatible binding	2015-05-25 16:53:25 +02:00
kirkwood-ds109.dts
kirkwood-ds110jv10.dts
kirkwood-ds111.dts
kirkwood-ds112.dts
kirkwood-ds209.dts
kirkwood-ds210.dts
kirkwood-ds212.dts
kirkwood-ds212j.dts
kirkwood-ds409.dts
kirkwood-ds409slim.dts
kirkwood-ds411.dts
kirkwood-ds411j.dts
kirkwood-ds411slim.dts
kirkwood-goflexnet.dts
kirkwood-guruplug-server-plus.dts
kirkwood-ib62x0.dts
kirkwood-iconnect.dts
kirkwood-iomega_ix2_200.dts	ARM: dts: add gpio_poweroff support for Iomega ix2-200	2014-12-21 06:38:54 -06:00
kirkwood-is2.dts	ARM: Kirkwood: add modes-map property to ns2-leds nodes	2015-08-28 14:06:16 +02:00
kirkwood-km_common.dtsi
kirkwood-km_fixedeth.dts
kirkwood-km_kirkwood.dts
kirkwood-laplug.dts
kirkwood-lschlv2.dts
kirkwood-lswvl.dts	ARM: dts: kirkwood: gpio-leds fixes for linkstation ls-wvl/vl	2016-01-25 15:05:11 +01:00
kirkwood-lswxl.dts	ARM: dts: kirkwood: gpio-leds fixes for linkstation ls-wxl/wsxl	2016-01-25 14:49:26 +01:00
kirkwood-lsxhl.dts
kirkwood-lsxl.dtsi	ARM: kirkwood: add "jedec,spi-nor" flash compatible binding	2015-05-25 16:53:25 +02:00
kirkwood-mplcec4.dts
kirkwood-mv88f6281gtw-ge.dts	ARM: kirkwood: add "jedec,spi-nor" flash compatible binding	2015-05-25 16:53:25 +02:00
kirkwood-nas2big.dts	ARM: Kirkwood: add DT description for nas2big	2015-03-11 18:16:03 +01:00
kirkwood-net2big.dts	ARM: Kirkwood: enable GPIO fan alarm support for 2Big Network v2	2015-03-04 14:31:34 +01:00
kirkwood-net5big.dts	ARM: Kirkwood: add LED DT entries for netxbig boards	2015-11-03 08:59:27 +01:00
kirkwood-netgear_readynas_duo_v2.dts
kirkwood-netgear_readynas_nv+_v2.dts
kirkwood-netxbig.dtsi	ARM: Kirkwood: add LED DT entries for netxbig boards	2015-11-03 08:59:27 +01:00
kirkwood-ns2-common.dtsi	ARM: kirkwood: add "jedec,spi-nor" flash compatible binding	2015-05-25 16:53:25 +02:00
kirkwood-ns2.dts	ARM: Kirkwood: add modes-map property to ns2-leds nodes	2015-08-28 14:06:16 +02:00
kirkwood-ns2lite.dts
kirkwood-ns2max.dts	ARM: Kirkwood: add modes-map property to ns2-leds nodes	2015-08-28 14:06:16 +02:00
kirkwood-ns2mini.dts	ARM: Kirkwood: add modes-map property to ns2-leds nodes	2015-08-28 14:06:16 +02:00
kirkwood-nsa3x0-common.dtsi
kirkwood-nsa310.dts
kirkwood-nsa310a.dts
kirkwood-nsa320.dts
kirkwood-nsa325.dts	ARM: dts: kirkwood: Add DTS for Zyxel NSA325	2015-12-15 17:12:55 +01:00
kirkwood-openblocks_a6.dts
kirkwood-openblocks_a7.dts
kirkwood-openrd-base.dts
kirkwood-openrd-client.dts
kirkwood-openrd-ultimate.dts
kirkwood-openrd.dtsi
kirkwood-pogo_e02.dts	ARM: Kirkwood: Added support for pogoplug e02 (pink/gray)	2015-01-21 18:35:26 -06:00
kirkwood-pogoplug-series-4.dts	ARM: mvebu: kirkwood: Add compatible property to "partitions" node	2016-01-25 13:16:04 +01:00
kirkwood-rd88f6192.dts	ARM: kirkwood: add "jedec,spi-nor" flash compatible binding	2015-05-25 16:53:25 +02:00
kirkwood-rd88f6281-a.dts
kirkwood-rd88f6281-z0.dts
kirkwood-rd88f6281.dtsi
kirkwood-rs212.dts
kirkwood-rs409.dts
kirkwood-rs411.dts
kirkwood-sheevaplug-common.dtsi
kirkwood-sheevaplug-esata.dts
kirkwood-sheevaplug.dts
kirkwood-synology.dtsi	ARM: kirkwood: add "jedec,spi-nor" flash compatible binding	2015-05-25 16:53:25 +02:00
kirkwood-t5325.dts	ARM: kirkwood: add "jedec,spi-nor" flash compatible binding	2015-05-25 16:53:25 +02:00
kirkwood-topkick.dts
kirkwood-ts219-6281.dts
kirkwood-ts219-6282.dts
kirkwood-ts219.dtsi	ARM: dts: Kirkwood: Fix QNAP TS219 power-off	2015-11-19 11:21:34 +01:00
kirkwood-ts419-6281.dts
kirkwood-ts419-6282.dts
kirkwood-ts419.dtsi
kirkwood.dtsi	ARM: mvebu: modify Orion and Kirkwoord crypto compatible strings	2015-10-09 17:08:02 +02:00
logicpd-torpedo-37xx-devkit.dts	ARM: OMAP2+: LogicPD Torpedo: Add Touchscreen Support	2015-12-21 11:10:40 -08:00
logicpd-torpedo-som.dtsi	ARM: dts: LogicPD Torpedo: Revert Duplicative Entries	2016-01-27 09:15:53 -08:00
lpc18xx.dtsi	ARM: dts: lpc18xx: add EEPROM memory node	2015-12-14 23:12:53 +01:00
lpc32xx.dtsi	arm: dts: lpc32xx: move USB controller subdevices into own device node	2015-11-18 18:01:27 +02:00
lpc4337-ciaa.dts	ARM: dts: lpc4337-ciaa: add i2c0 and devices	2015-12-14 23:13:06 +01:00
lpc4350-hitex-eval.dts	ARM: dts: lpc4350-hitex-eval: add joystick, buttons and leds	2015-09-30 22:49:03 +02:00
lpc4350.dtsi	ARM: dts: Add DT for Hitex LPC4350 Evaluation Board	2015-05-15 22:28:29 +02:00
lpc4357-ea4357-devkit.dts	ARM: dts: lpc4357-ea4357: add mma7455 i2c accelerometer	2015-12-14 23:13:05 +01:00
lpc4357.dtsi	ARM: dts: lpc4357: enable EEPROM memory	2015-12-14 23:13:04 +01:00
ls1021a-qds.dts	ARM: dts: ls1021a: add sata node to dts	2015-12-22 20:43:40 +08:00
ls1021a-twr.dts	ARM: dts: ls1021a: add sata node to dts	2015-12-22 20:43:40 +08:00
ls1021a.dtsi	ARM: dts: ls1021a: add sata node to dts	2015-12-22 20:43:40 +08:00
Makefile	ARM: bcm2835: Add devicetree for bcm2836 and Raspberry Pi 2 B	2015-12-31 17:17:00 +01:00
meson.dtsi	ARM: meson6: DTS: Fix wrong reg mapping and IRQ numbers	2015-10-14 22:13:07 +02:00
meson6-atv1200.dts	ARM: dts: meson: enable Ethernet controller	2015-03-02 11:00:55 +01:00
meson6.dtsi	ARM: meson: DTS: enable L2 cache	2014-11-18 16:36:14 +01:00
meson8-minix-neo-x8.dts	ARM: dts: meson: add DTS file for MINIX NEO-X8	2015-03-02 11:01:03 +01:00
meson8.dtsi	ARM: dts: meson8: add pinctrl node	2015-03-02 11:00:59 +01:00
meson8b-mxq.dts	ARM: meson: Add DTS for Odroid-C1 and Tronfy MXQ boards	2015-10-08 17:21:55 +02:00
meson8b-odroidc1.dts	ARM: meson: Add status LED for Odroid-C1	2016-01-04 10:54:38 +01:00
meson8b.dtsi	ARM: dts: meson8b: Add watchdog node	2016-01-04 10:54:45 +01:00
mmp2-brownstone.dts	arm: mmp: Make all the dts file to be compiled by Makefile	2014-11-12 16:34:26 -08:00
mmp2.dtsi	arm: mmp: Make use of the DT supported clock	2014-11-12 16:34:30 -08:00
moxart-uc7112lx.dts
moxart.dtsi
mpa1600.dts
mt2701-evb.dts	ARM: dts: mediatek: add MT2701 basic support	2015-11-20 13:59:05 +01:00
mt2701.dtsi	ARM: dts: mediatek: add MT2701 basic support	2015-11-20 13:59:05 +01:00
mt6580-evbp1.dts	ARM: dts: mediatek: add mt6580 basic support	2015-07-18 00:22:42 +02:00
mt6580.dtsi	ARM: dts: mediatek: add mt6580 basic support	2015-07-18 00:22:42 +02:00
mt6589-aquaris5.dts	ARM: mediatek: dts: Add uart to Aquaris5	2015-01-11 21:17:49 +01:00
mt6589.dtsi	ARM: DTS: Add watchdog to mt6589	2015-03-30 13:18:23 +02:00
mt6592-evb.dts	ARM: mediatek: add dts for mt6592-evb	2014-11-14 13:50:47 +01:00
mt6592.dtsi	ARM: mediatek: dts: Add uart to mt6592	2015-01-20 18:09:39 +01:00
mt8127-moose.dts	ARM: mediatek: dts: Add UART dts for MT8127 and MT8135 boards	2015-01-08 12:12:43 +01:00
mt8127.dtsi	ARM: dts: mt8127: enable basic SMP bringup for mt8127	2015-10-12 19:10:38 +02:00
mt8135-evbp1.dts	ARM: dts: mt8135-evbp1: remove regulator-compatible usage	2015-09-27 15:38:43 +02:00
mt8135-pinfunc.h	ARM: dts: mt8135: Add pinctrl/GPIO/EINT node for mt8135.	2015-05-04 10:56:07 +02:00
mt8135.dtsi	ARM: mediatek: DT: Move reset controller constants into common location	2015-11-24 18:58:12 +01:00
mxs-pinfunc.h
nspire-classic.dtsi	devicetree: Add TI-NSPIRE USB OTG support to device tree	2015-03-04 23:44:17 +01:00
nspire-clp.dts
nspire-cx.dts	devicetree: Add TI-NSPIRE USB OTG support to device tree	2015-03-04 23:44:17 +01:00
nspire-tp.dts
nspire.dtsi	ARM: dts: TI-Nspire: fix cpu compatible value	2015-10-23 21:59:31 +02:00
omap-gpmc-smsc911x.dtsi
omap-gpmc-smsc9221.dtsi
omap-zoom-common.dtsi
omap2.dtsi	ARM: dts: omap2: Correct the dma controller's property names	2015-02-24 10:35:43 -08:00
omap3-beagle-xm-ab.dts
omap3-beagle-xm.dts	ARM: dts: omap: replace legacy *,wakeup property with wakeup-source	2015-12-17 09:52:32 -08:00
omap3-beagle.dts	ARM: dts: omap: replace legacy *,wakeup property with wakeup-source	2015-12-17 09:52:32 -08:00
omap3-cm-t3x.dtsi	ARM: dts: omap: replace legacy *,wakeup property with wakeup-source	2015-12-17 09:52:32 -08:00
omap3-cm-t3x30.dtsi	ARM: dts: omap3: Remove all references to ti,codec property	2015-03-16 19:24:51 -07:00
omap3-cm-t3517.dts	ARM: Show proper respect for Heinrich Hertz by using the correct unit for frequency	2015-05-14 16:22:05 +01:00
omap3-cm-t3530.dts	ARM: dts: sbc-t3x: add DVI display data	2014-11-10 14:27:35 -08:00
omap3-cm-t3730.dts	ARM: dts: add wl12xx/wl18xx bindings	2015-03-24 09:48:14 -07:00
omap3-devkit8000-common.dtsi	ARM: dts: omap: replace legacy *,wakeup property with wakeup-source	2015-12-17 09:52:32 -08:00
omap3-devkit8000-lcd-common.dtsi	ARM: dts: omap: replace legacy *,wakeup property with wakeup-source	2015-12-17 09:52:32 -08:00
omap3-devkit8000-lcd43.dts	ARM: dts: omap3-devkit8000: add LCD panels	2015-08-06 00:37:41 -07:00
omap3-devkit8000-lcd70.dts	ARM: dts: omap3-devkit8000: add LCD panels	2015-08-06 00:37:41 -07:00
omap3-devkit8000.dts	ARM: dts: omap3-devkit8000: add LCD panels	2015-08-06 00:37:41 -07:00
omap3-evm-37xx.dts	ARM: dts: omap3-evm-37xx: Use OMAP3_*_IOPAD pinmux macros	2015-11-30 08:43:27 -08:00
omap3-evm-common.dtsi	ARM: dts: Use defined GPIO constants in flags cell for OMAP2+ boards	2015-10-12 15:51:59 -07:00
omap3-evm.dts
omap3-gta04.dtsi	ARM: dts: omap: replace legacy *,wakeup property with wakeup-source	2015-12-17 09:52:32 -08:00
omap3-gta04a3.dts
omap3-gta04a4.dts
omap3-gta04a5.dts	ARM: dts: Use defined GPIO constants in flags cell for OMAP2+ boards	2015-10-12 15:51:59 -07:00
omap3-ha-common.dtsi
omap3-ha-lcd.dts
omap3-ha.dts
omap3-igep.dtsi	ARM: dts: Update Javier Martinez Canillas's email	2015-10-20 09:28:04 -07:00
omap3-igep0020-common.dtsi	ARM: dts: omap3-igep0020: Use IOPAD pinmux macro	2015-10-20 09:28:04 -07:00
omap3-igep0020-rev-f.dts	ARM: dts: Update Javier Martinez Canillas's email	2015-10-20 09:28:04 -07:00
omap3-igep0020.dts	ARM: dts: omap3-igep0020: Use MMC pwrseq to init SDIO WiFi	2015-12-07 16:11:10 -08:00
omap3-igep0030-common.dtsi	ARM: dts: Update Javier Martinez Canillas's email	2015-10-20 09:28:04 -07:00
omap3-igep0030-rev-g.dts	ARM: dts: Update Javier Martinez Canillas's email	2015-10-20 09:28:04 -07:00
omap3-igep0030.dts	ARM: dts: omap3-igep0030: Use MMC pwrseq to init SDIO WiFi	2015-12-07 16:11:43 -08:00
omap3-ldp.dts	ARM: dts: omap: replace legacy *,wakeup property with wakeup-source	2015-12-17 09:52:32 -08:00
omap3-lilly-a83x.dtsi	ARM: dts: omap: replace legacy *,wakeup property with wakeup-source	2015-12-17 09:52:32 -08:00
omap3-lilly-dbb056.dts	ARM: dts: Use defined GPIO constants in flags cell for OMAP2+ boards	2015-10-12 15:51:59 -07:00
omap3-n9.dts	ARM: dts: n950, n9: Add primary camera support	2015-03-19 10:59:28 -07:00
omap3-n900.dts	ARM: dts: omap: replace legacy *,wakeup property with wakeup-source	2015-12-17 09:52:32 -08:00
omap3-n950-n9.dtsi	ARM: dts: omap3-n9: Use OMAP3_CORE1_IOPAD pinmux macro	2015-11-30 08:43:28 -08:00
omap3-n950.dts	ARM: dts: n950, n9: Add primary camera support	2015-03-19 10:59:28 -07:00
omap3-overo-alto35-common.dtsi	ARM: dts: omap: replace legacy *,wakeup property with wakeup-source	2015-12-17 09:52:32 -08:00
omap3-overo-alto35.dts
omap3-overo-base.dtsi	ARM: dts: Use defined GPIO constants in flags cell for OMAP2+ boards	2015-10-12 15:51:59 -07:00
omap3-overo-chestnut43-common.dtsi	ARM: dts: omap: replace legacy *,wakeup property with wakeup-source	2015-12-17 09:52:32 -08:00
omap3-overo-chestnut43.dts
omap3-overo-common-dvi.dtsi
omap3-overo-common-lcd35.dtsi	ARM: dts: omap: replace legacy *,wakeup property with wakeup-source	2015-12-17 09:52:32 -08:00
omap3-overo-common-lcd43.dtsi	ARM: dts: omap: replace legacy *,wakeup property with wakeup-source	2015-12-17 09:52:32 -08:00
omap3-overo-common-peripherals.dtsi
omap3-overo-gallop43-common.dtsi	ARM: dts: omap: replace legacy *,wakeup property with wakeup-source	2015-12-17 09:52:32 -08:00
omap3-overo-gallop43.dts
omap3-overo-palo35-common.dtsi	ARM: dts: omap: replace legacy *,wakeup property with wakeup-source	2015-12-17 09:52:32 -08:00
omap3-overo-palo35.dts	ARM: dts: overo: Add device tree for Palo35 board	2015-07-14 04:15:11 -07:00
omap3-overo-palo43-common.dtsi	ARM: dts: omap: replace legacy *,wakeup property with wakeup-source	2015-12-17 09:52:32 -08:00
omap3-overo-palo43.dts
omap3-overo-storm-alto35.dts
omap3-overo-storm-chestnut43.dts
omap3-overo-storm-gallop43.dts
omap3-overo-storm-palo35.dts	ARM: dts: overo: Add device tree for Palo35 board	2015-07-14 04:15:11 -07:00
omap3-overo-storm-palo43.dts
omap3-overo-storm-summit.dts
omap3-overo-storm-tobi.dts
omap3-overo-storm-tobiduo.dts	ARM: dts: Add DTS for Gumstix TobiDuo expansion board	2015-07-14 04:15:10 -07:00
omap3-overo-storm.dtsi
omap3-overo-summit-common.dtsi
omap3-overo-summit.dts
omap3-overo-tobi-common.dtsi
omap3-overo-tobi.dts
omap3-overo-tobiduo-common.dtsi	ARM: dts: Add DTS for Gumstix TobiDuo expansion board	2015-07-14 04:15:10 -07:00
omap3-overo-tobiduo.dts	ARM: dts: Add DTS for Gumstix TobiDuo expansion board	2015-07-14 04:15:10 -07:00
omap3-overo.dtsi	ARM: dts: overo: Enable McBSP2 for all Overo COMs	2015-07-14 04:15:10 -07:00
omap3-pandora-1ghz.dts	ARM: dts: omap3-pandora: miscellaneous corrections	2015-07-21 04:07:41 -07:00
omap3-pandora-600mhz.dts	ARM: dts: omap3-pandora: miscellaneous corrections	2015-07-21 04:07:41 -07:00
omap3-pandora-common.dtsi	ARM: dts: omap: replace legacy *,wakeup property with wakeup-source	2015-12-17 09:52:32 -08:00
omap3-panel-sharp-ls037v7dw01.dtsi	ARM: dts: omap: replace legacy *,wakeup property with wakeup-source	2015-12-17 09:52:32 -08:00
omap3-sb-t35.dtsi	ARM: dts: sbc-t3x30: add audio support	2014-11-24 07:54:48 -08:00
omap3-sbc-t3517.dts	ARM: dts: cm-t3x: add NAND support	2015-01-13 08:00:10 -08:00
omap3-sbc-t3530.dts	ARM: dts: cm-t3x: add NAND support	2015-01-13 08:00:10 -08:00
omap3-sbc-t3730.dts	ARM: dts: cm-t3x: add NAND support	2015-01-13 08:00:10 -08:00
omap3-tao3530.dtsi	ARM: dts: Use defined GPIO constants in flags cell for OMAP2+ boards	2015-10-12 15:51:59 -07:00
omap3-thunder.dts
omap3-zoom3.dts	ARM: dts: omap3-zoom3: Use OMAP3_*_IOPAD pinmux macros	2015-11-30 08:43:28 -08:00
omap3.dtsi	ARM: dts: am437x/am33xx/omap/dm816x: Add gpmc dma channel	2015-11-30 11:03:35 -08:00
omap3xxx-clocks.dtsi	ARM: dts: omap3: add minimal l4 bus layout with control module support	2015-03-31 21:26:56 +03:00
omap4-cpu-thermal.dtsi	ARM: dts: am57xx-beagle-x15: Add thermal map to include fan and tmp102	2015-03-26 12:02:12 -07:00
omap4-duovero-parlor.dts	ARM: DT updates for v4.5	2016-01-20 18:16:29 -08:00
omap4-duovero.dtsi	ARM: omap: convert wakeupgen to stacked domains	2015-03-15 00:56:13 +00:00
omap4-panda-a4.dts	ARM: dts: omap4-panda-a4: Use OMAP4_IOPAD pinmux macro	2015-11-30 08:43:29 -08:00
omap4-panda-common.dtsi	ARM: dts: omap4-panda-common: Use OMAP4_IOPAD pinmux macro	2015-11-30 08:43:30 -08:00
omap4-panda-es.dts	ARM: dts: omap4-panda-es: Use OMAP4_IOPAD pinmux macro	2015-11-30 08:43:30 -08:00
omap4-panda.dts
omap4-sdp-es23plus.dts	ARM: dts: omap4-sdp-es23plus: Use OMAP4_IOPAD pinmux macro	2015-11-30 08:43:31 -08:00
omap4-sdp.dts	ARM: dts: omap4-sdp: Use OMAP4_IOPAD pinmux macro	2015-11-30 08:43:30 -08:00
omap4-var-dvk-om44.dts
omap4-var-om44customboard.dtsi	ARM: dts: omap: replace legacy *,wakeup property with wakeup-source	2015-12-17 09:52:32 -08:00
omap4-var-som-om44-wlan.dtsi	ARM: dts: Use defined GPIO constants in flags cell for OMAP2+ boards	2015-10-12 15:51:59 -07:00
omap4-var-som-om44.dtsi	ARM: dts: Use defined GPIO constants in flags cell for OMAP2+ boards	2015-10-12 15:51:59 -07:00
omap4-var-stk-om44.dts
omap4.dtsi	ARM: dts: omap4: Add elm node	2015-11-30 14:03:47 -08:00
omap5-board-common.dtsi	Merge branch 'enable-devices' into omap-for-v4.5/fixes	2016-01-25 10:46:21 -08:00
omap5-cm-t54.dts	ARM: dts: omap: replace legacy *,wakeup property with wakeup-source	2015-12-17 09:52:32 -08:00
omap5-core-thermal.dtsi	ARM: dts: OMAP5: fix polling intervals for thermal zones	2015-03-06 09:07:17 -08:00
omap5-gpu-thermal.dtsi	ARM: dts: OMAP5: fix polling intervals for thermal zones	2015-03-06 09:07:17 -08:00
omap5-igep0050.dts	ARM: dts: Add basic support for isee igepv5	2015-10-16 12:32:33 -07:00
omap5-sbc-t54.dts
omap5-uevm.dts	ARM: dts: omap5-uevm.dts: Use OMAP5_IOPAD pinmux macro	2015-11-30 08:43:32 -08:00
omap5.dtsi	ARM: dts: am437x/am33xx/omap/dm816x: Add gpmc dma channel	2015-11-30 11:03:35 -08:00
omap24xx-clocks.dtsi	ARM: dts: omap24xx: add minimal l4 bus layout with control module support	2015-03-31 21:26:55 +03:00
omap34xx-omap36xx-clocks.dtsi
omap34xx.dtsi	Merge branch 'omap/dt' into next/late	2015-04-15 21:41:13 +02:00
omap36xx-am35xx-omap3430es2plus-clocks.dtsi
omap36xx-clocks.dtsi
omap36xx-omap3430es2plus-clocks.dtsi
omap36xx.dtsi	Merge branch 'omap/dt' into next/late	2015-04-15 21:41:13 +02:00
omap44xx-clocks.dtsi	ARM: dts: omap4.dtsi: remove dss_fck	2014-11-19 16:42:00 -07:00
omap54xx-clocks.dtsi	ARM: dts: OMAP5: Fix the bypass clock source for dpll_iva and others	2015-03-06 08:36:33 -08:00
omap443x-clocks.dtsi
omap443x.dtsi
omap446x-clocks.dtsi
omap2420-clocks.dtsi
omap2420-h4.dts
omap2420-n8x0-common.dtsi	ARM: dts: Use defined GPIO constants in flags cell for OMAP2+ boards	2015-10-12 15:51:59 -07:00
omap2420-n800.dts
omap2420-n810-wimax.dts
omap2420-n810.dts
omap2420.dtsi	ARM: dts: omap24xx: add minimal l4 bus layout with control module support	2015-03-31 21:26:55 +03:00
omap2430-clocks.dtsi	ARM: dts: omap24xx: add minimal l4 bus layout with control module support	2015-03-31 21:26:55 +03:00
omap2430-sdp.dts	ARM: dts: Fix gpmc regression for omap 2430sdp smc91x	2014-12-10 08:26:25 -08:00
omap2430.dtsi	ARM: dts: fix omap2+ address translation for pbias	2015-09-24 16:28:32 -07:00
omap3430-sdp.dts
omap3430es1-clocks.dtsi
omap4460.dtsi	ARM: dts: Use defined GPIO constants in flags cell for OMAP2+ boards	2015-10-12 15:51:59 -07:00
orion5x-lacie-d2-network.dts
orion5x-lacie-ethernet-disk-mini-v2.dts
orion5x-linkstation-lswtgl.dts	ARM: dts: orion5x: gpio pin fixes for linkstation lswtgl	2016-01-25 16:22:59 +01:00
orion5x-lswsgl.dts	ARM: dts: Convert Linkstation Mini to Device Tree	2015-08-06 18:51:29 +02:00
orion5x-maxtor-shared-storage-2.dts
orion5x-mv88f5182.dtsi
orion5x-rd88f5182-nas.dts
orion5x.dtsi	ARM: mvebu: use new bindings for existing crypto devices	2015-10-09 17:08:01 +02:00
phy3250.dts	arm: dts: lpc32xx: move USB controller subdevices into own device node	2015-11-18 18:01:27 +02:00
picoxcell-pc3x2.dtsi
picoxcell-pc3x3.dtsi
picoxcell-pc7302-pc3x2.dts
picoxcell-pc7302-pc3x3.dts
pm9g45.dts
prima2-evb.dts
prima2.dtsi	ARM: dts: prima2: add resets property for VPP nodes	2014-11-25 18:46:43 +08:00
pxa2xx.dtsi	ARM: dts: pxa: add dma pxamci nodes to pxa3xx	2015-07-10 22:29:22 +02:00
pxa3xx.dtsi	ARM: dts: pxa: add the usb host controller	2015-07-10 22:29:22 +02:00
pxa27x.dtsi	ARM: dts: pxa: fix power i2c definition	2015-07-10 22:29:22 +02:00
pxa168-aspenite.dts	arm: mmp: Make all the dts file to be compiled by Makefile	2014-11-12 16:34:26 -08:00
pxa168.dtsi	arm: mmp: Make use of the DT supported clock	2014-11-12 16:34:30 -08:00
pxa910-dkb.dts	arm: mmp: Make all the dts file to be compiled by Makefile	2014-11-12 16:34:26 -08:00
pxa910.dtsi	arm: mmp: Make use of the DT supported clock	2014-11-12 16:34:30 -08:00
qcom-apq8064-cm-qs600.dts	ARM: dts: qcom: apq8064: Declare all pm8921 regulators	2015-12-08 23:33:12 -06:00
qcom-apq8064-ifc6410.dts	PCI changes for the v4.5 merge window:	2016-01-21 11:52:16 -08:00
qcom-apq8064-sony-xperia-yuga.dts	ARM: dts: qcom: apq8064: Introduce Sony Xperia Z dts	2015-12-08 23:33:12 -06:00
qcom-apq8064-v2.0.dtsi
qcom-apq8064.dtsi	PCI changes for the v4.5 merge window:	2016-01-21 11:52:16 -08:00
qcom-apq8074-dragonboard.dts	arm: dts: qcom: Add aliases for PMICs	2015-12-08 23:33:12 -06:00
qcom-apq8084-ifc6540.dts	arm: dts: qcom: Add aliases for PMICs	2015-12-08 23:33:12 -06:00
qcom-apq8084-mtp.dts	arm: dts: qcom: Add aliases for PMICs	2015-12-08 23:33:12 -06:00
qcom-apq8084.dtsi	arm: dts: Add support for PMA8084 on APQ8084	2015-12-15 23:35:19 -06:00
qcom-ipq8064-ap148.dts	ARM: dts: qcom: ipq8064-ap148: Use stdout-path	2015-09-09 14:57:32 -05:00
qcom-ipq8064-v1.0.dtsi
qcom-ipq8064.dtsi	ARM: dts: qcom: Label serial nodes for aliasing and stdout-path	2015-09-09 14:56:42 -05:00
qcom-msm8660-surf.dts	ARM: dts: qcom: msm8660-surf: Use stdout-path	2015-09-09 14:57:39 -05:00
qcom-msm8660.dtsi	ARM: dts: qcom: Label serial nodes for aliasing and stdout-path	2015-09-09 14:56:42 -05:00
qcom-msm8960-cdp.dts	ARM: dts: qcom: msm8960-cdp: Use stdout-path	2015-09-09 14:57:46 -05:00
qcom-msm8960.dtsi	arm: dts: qcom: Add board clocks	2015-12-08 23:33:12 -06:00
qcom-msm8974-sony-xperia-honami.dts	ARM: dts: qcom: msm8974: Disable wled and move it to honami	2015-12-08 23:33:13 -06:00
qcom-msm8974.dtsi	ARM: dts: qcom: msm8974: Add i2c8 node	2015-12-08 23:33:13 -06:00
qcom-pm8841.dtsi	arm: dts: qcom: Add generic PMIC gpio/MPP compat strings	2015-12-08 23:33:13 -06:00
qcom-pm8941.dtsi	ARM: dts: qcom: msm8974: Disable wled and move it to honami	2015-12-08 23:33:13 -06:00
qcom-pma8084.dtsi	arm: dts: qcom: Add generic PMIC gpio/MPP compat strings	2015-12-08 23:33:13 -06:00
r7s72100-genmai.dts	ARM: shmobile: genmai dts: Replace status value "ok" by "okay"	2014-12-21 16:55:31 +09:00
r7s72100.dtsi	ARM: shmobile: r7s72100 dtsi: Use "arm,pl390" for GIC	2015-12-14 17:26:16 +09:00
r8a73a4-ape6evm.dts	ARM: shmobile: ape6evm dts: Add serial port config to chosen/stdout-path	2015-12-10 13:33:01 +09:00
r8a73a4.dtsi	ARM: shmobile: r8a73a4 dtsi: Add missing "gpio-ranges" to gpio node	2015-08-05 06:39:27 +09:00
r8a77xx-aa104xd12-panel.dtsi
r8a77xx-aa121td01-panel.dtsi	ARM: shmobile: dts: Add common file for AA121TD01 panel	2015-10-02 15:11:20 +09:00
r8a7740-armadillo800eva.dts	ARM: SoC fixes for v4.5 merge window	2016-01-22 17:26:00 -08:00
r8a7740.dtsi	ARM: DT updates for v4.5	2016-01-20 18:16:29 -08:00
r8a7778-bockw.dts	ARM: dts: bockw: Add compatible property to "partitions" node	2016-01-07 08:38:54 +11:00
r8a7778.dtsi	ARM: DT updates for v4.5	2016-01-20 18:16:29 -08:00
r8a7779-marzen.dts	ARM: shmobile: marzen: Board specific serial port order	2015-09-14 10:16:36 +09:00
r8a7779.dtsi	ARM: shmobile: r8a7779 dtsi: Add CPG/MSTP Clock Domain	2015-08-12 11:15:26 +09:00
r8a7790-lager.dts	ARM: dts: lager: Add compatible property to "partitions" node	2016-01-07 08:38:56 +11:00
r8a7790.dtsi	ARM: shmobile: r8a779x: use SoC-specific usb-dmac compatibility strings	2015-12-17 10:10:54 +09:00
r8a7791-koelsch.dts	ARM: dts: koelsch: Add compatible property to "partitions" node	2016-01-07 08:38:59 +11:00
r8a7791-porter.dts	ARM: dts: porter: Add compatible property to "partitions" node	2016-01-07 08:39:01 +11:00
r8a7791.dtsi	ARM: shmobile: r8a779x: use SoC-specific usb-dmac compatibility strings	2015-12-17 10:10:54 +09:00
r8a7793-gose.dts	ARM: dts: gose: Add compatible property to "partitions" node	2016-01-07 08:39:04 +11:00
r8a7793.dtsi	ARM: shmobile: r8a7793: IPMMU compat string SoC part number update	2015-12-15 18:16:58 +09:00
r8a7794-alt.dts	ARM: shmobile: alt dts: Add serial port config to chosen/stdout-path	2015-12-10 13:32:49 +09:00
r8a7794-silk.dts	ARM: dts: silk: Add compatible property to "partitions" node	2016-01-07 08:39:06 +11:00
r8a7794.dtsi	ARM: shmobile: r8a7794: IPMMU compat string SoC part number update	2015-12-15 18:17:10 +09:00
rk3xxx.dtsi	ARM: dts: rockchip: Setup rk3066/rk3188 ethernet0 alias for u-boot	2015-11-19 05:54:58 +01:00
rk3036-evb.dts	ARM: dts: rockchip: add rk3036-evb board	2015-11-24 00:10:15 +01:00
rk3036-kylin.dts	ARM: dts: rockchip: add the kylin board for rk3036	2015-12-19 18:11:48 +01:00
rk3036.dtsi	ARM: dts: rockchip: add the sdio/sdmmc node for rk3036	2015-12-19 18:11:36 +01:00
rk3066a-bqcurie2.dts	ARM: dts: rockchip: support highspeed sd-cards on rk3066a boards	2015-10-08 22:38:07 +02:00
rk3066a-marsboard.dts	ARM: dts: rockchip: Add support for SD/MMC on MarsBoard-RK3066	2015-10-08 22:37:00 +02:00
rk3066a-rayeager.dts	ARM: dts: rockchip: support highspeed sd-cards on rk3066a boards	2015-10-08 22:38:07 +02:00
rk3066a.dtsi	ARM: dts: rockchip: add eFuse node for rk3066a SoCs	2015-12-14 14:14:54 +01:00
rk3188-radxarock.dts	ARM: dts: rockchip: Add SPDIF optical out on Radxa Rock	2015-10-13 10:58:31 +02:00
rk3188.dtsi	ARM: dts: rockchip: add eFuse node for rk3188 SoCs	2015-12-14 14:15:44 +01:00
rk3228-evb.dts	ARM: dts: rockchip: add rk3228-evb board	2015-12-12 20:14:30 +01:00
rk3228.dtsi	ARM: dts: rockchip: add core rk3228 dtsi	2015-12-12 20:14:25 +01:00
rk3288-evb-act8846.dts	ARM: dts: rockchip: fix voltage ranges for rk3288-evb-act8846 board	2015-12-11 14:01:13 +01:00
rk3288-evb-rk808.dts	ARM: dts: rockchip: move the public part to rk3288-evb common	2015-12-11 12:30:48 +01:00
rk3288-evb.dtsi	ARM: dts: rockchip: move the public part to rk3288-evb common	2015-12-11 12:30:48 +01:00
rk3288-firefly-beta.dts	ARM: dts: rockchip: add dts for Firefly Firefly-RK3288 boards	2015-01-26 01:15:02 +01:00
rk3288-firefly.dts	ARM: dts: rockchip: add dts for Firefly Firefly-RK3288 boards	2015-01-26 01:15:02 +01:00
rk3288-firefly.dtsi	ARM: dts: rockchip: add rk3288-firefly iodomains	2015-10-08 22:40:18 +02:00
rk3288-popmetal.dts	ARM: dts: rockchip: add rk3288-popmetal iodomains	2015-10-08 22:40:06 +02:00
rk3288-r89.dts	ARM: dts: rockchip: add gpio-ir-receiver to the R89 board	2015-12-04 20:01:27 +01:00
rk3288-rock2-som.dtsi	ARM: dts: rockchip: set system-power-controller property on rk3288-rock2	2015-11-19 21:43:31 +01:00
rk3288-rock2-square.dts	ARM: dts: rockchip: Add IR receiver to RK3288 Radxa Rock 2 Square	2015-11-23 17:18:45 +01:00
rk3288-thermal.dtsi	ARM: dts: rockchip: update the thermal management on rk3288	2015-12-01 14:25:36 +01:00
rk3288-veyron-brain.dts	ARM: dts: rockchip: add veyron-brain board	2015-12-03 16:55:37 +01:00
rk3288-veyron-chromebook.dtsi	ARM: dts: rockchip: add shared rk3288-veyron files	2015-07-16 13:38:43 +02:00
rk3288-veyron-jaq.dts	ARM: dts: rockchip: add veyron-jaq board	2015-10-08 22:37:09 +02:00
rk3288-veyron-jerry.dts	ARM: dts: rockchip: correct regulator power states for suspend	2015-08-21 01:40:35 +02:00
rk3288-veyron-mickey.dts	ARM: dts: rockchip: add veyron-mickey board	2015-12-03 16:55:40 +01:00
rk3288-veyron-minnie.dts	First round of arm devicetree changes.	2015-12-12 00:26:26 +01:00
rk3288-veyron-pinky.dts	ARM: dts: rockchip: correct regulator power states for suspend	2015-08-21 01:40:35 +02:00
rk3288-veyron-sdmmc.dtsi	ARM: dts: rockchip: add tuning related settings to veyron devices	2015-10-26 16:00:13 +01:00
rk3288-veyron-speedy.dts	ARM: dts: rockchip: override thermal settings on veyron-speedy	2015-12-01 14:25:39 +01:00
rk3288-veyron.dtsi	ARM: dts: rockchip: make sure edp_24m is associated to xin24m on veyron	2015-12-03 16:55:33 +01:00
rk3288.dtsi	Another new soc - the rk3228 quad-core cortex-a7, a new rk3036 board,	2015-12-22 13:07:11 -08:00
s3c24xx.dtsi
s3c64xx-pinctrl.dtsi
s3c64xx.dtsi
s3c2416-pinctrl.dtsi
s3c2416-smdk2416.dts	ARM: dts: s3c2416: Use labels for overriding nodes in SMDK2416	2015-06-03 09:56:54 +09:00
s3c2416.dtsi	ARM: dts: Fix cpu compatible value for s3c2416	2015-09-29 15:52:58 +09:00
s3c6400.dtsi
s3c6410-mini6410.dts
s3c6410-smdk6410.dts
s3c6410.dtsi
s5pv210-aquila.dts	ARM: dts: Fix typo in regulator enable GPIO property in s5pv210-aquila	2015-10-24 04:31:29 +09:00
s5pv210-goni.dts	ARM: dts: Fix typo in regulator enable GPIO property in s5pv210-goni	2015-10-24 04:31:35 +09:00
s5pv210-pinctrl.dtsi
s5pv210-smdkc110.dts
s5pv210-smdkv210.dts	ARM: dts: add 'dr_mode' property to hsotg devices for exynos boards	2015-01-24 13:24:06 +09:00
s5pv210-torbreck.dts
s5pv210.dtsi
sama5d2-pinfunc.h	ARM: at91/dt: add sama5d2 pinmux	2015-09-23 16:26:05 +02:00
sama5d2.dtsi	ARM: at91/dt: sama5d2: add pdmic node	2015-12-22 10:37:30 +01:00
sama5d3.dtsi	ARM: at91/dt: use syscon for PMC	2015-10-19 17:57:41 +02:00
sama5d3_can.dtsi	ARM: at91/dt/trivial: correct file headers for SAMA5D3 SoC peripherals	2015-03-04 18:36:10 +01:00
sama5d3_emac.dtsi	ARM: DT updates for v4.1	2015-04-22 09:09:46 -07:00
sama5d3_gmac.dtsi	ARM: at91/dt/trivial: correct file headers for SAMA5D3 SoC peripherals	2015-03-04 18:36:10 +01:00
sama5d3_lcd.dtsi	ARM: at91/dt: define the HLCDC node available on sama5d3 SoCs	2015-03-23 15:37:35 +01:00
sama5d3_mci2.dtsi	ARM: at91/dt: add pullup on mmc2 data signals	2015-10-19 17:57:43 +02:00
sama5d3_tcb1.dtsi	ARM: at91/dt: sama5d3: use slow clock where necessary	2015-08-07 11:58:45 +02:00
sama5d3_uart.dtsi	ARM: at91/dt/trivial: correct file headers for SAMA5D3 SoC peripherals	2015-03-04 18:36:10 +01:00
sama5d3xcm.dtsi	ARM: at91/dt: sama5d3xek: use stdout-path	2015-06-04 10:00:39 +02:00
sama5d3xdm.dtsi
sama5d3xmb.dtsi	ARM: at91/dt: ov2640: add hsync/vsync-active property	2015-09-21 16:20:25 +02:00
sama5d4.dtsi	ARM: dts: at91: sama5d4: fix instance id of DBGU	2016-01-27 11:11:51 +01:00
sama5d31.dtsi	ARM: at91/dt: Fix sama5d3x typos	2014-11-16 15:12:04 -08:00
sama5d31ek.dts
sama5d33.dtsi	ARM: at91/dt: Fix sama5d3x typos	2014-11-16 15:12:04 -08:00
sama5d33ek.dts
sama5d34.dtsi	ARM: at91/dt: Fix sama5d3x typos	2014-11-16 15:12:04 -08:00
sama5d34ek.dts
sama5d35.dtsi	ARM: at91/dt: Fix sama5d3x typos	2014-11-16 15:12:04 -08:00
sama5d35ek.dts	ARM: at91/dt: replace gpio-key,wakeup with wakeup-source property	2015-11-16 15:53:04 +01:00
sama5d36.dtsi	ARM: at91/dt: Fix sama5d3x typos	2014-11-16 15:12:04 -08:00
sama5d36ek.dts
samsung_k3pe0e000b.dtsi
sh73a0-kzm9g.dts	ARM: dts: shmobile/r8a7xxx: replace gpio-key, wakeup with wakeup-source property	2015-10-23 09:16:46 +09:00
sh73a0.dtsi	ARM: shmobile: sh73a0: Add MSIOF device nodes	2015-12-01 15:35:42 +09:00
skeleton.dtsi
skeleton64.dtsi
socfpga.dtsi	ARM: socfpga: dts: Enable MMC support at correct place in the DT	2015-12-21 00:44:21 -06:00
socfpga_arria5.dtsi
socfpga_arria5_socdk.dts	ARM: socfpga: dts: Enable MMC support at correct place in the DT	2015-12-21 00:44:21 -06:00
socfpga_arria10.dtsi	ARM: socfpga: dts: add clock fields for I2C, UART and USB on Arria10	2015-10-06 04:42:29 -05:00
socfpga_arria10_socdk.dtsi	ARM: socfpga: dts: enable USB and I2C on Arria10 SoCDK	2015-10-06 04:42:34 -05:00
socfpga_arria10_socdk_sdmmc.dts	ARM: socfpga: dts: rename socdk board file to socdk_sdmmc	2015-05-11 13:14:59 -05:00
socfpga_cyclone5.dtsi	arm: dts: socfpga: enable watchdog for socfpga platform	2014-11-20 23:08:39 -06:00
socfpga_cyclone5_de0_sockit.dts	ARM: socfpga: dts: Enable MMC support at correct place in the DT	2015-12-21 00:44:21 -06:00
socfpga_cyclone5_mcv.dtsi	ARM: socfpga: dts: Enable MMC support at correct place in the DT	2015-12-21 00:44:21 -06:00
socfpga_cyclone5_mcvevk.dts	ARM: socfpga: Repair incorrectly applied MCV patch	2015-12-18 06:22:13 -06:00
socfpga_cyclone5_socdk.dts	ARM: socfpga: dts: Enable MMC support at correct place in the DT	2015-12-21 00:44:21 -06:00
socfpga_cyclone5_sockit.dts	ARM: socfpga: dts: Enable MMC support at correct place in the DT	2015-12-21 00:44:21 -06:00
socfpga_cyclone5_socrates.dts	ARM: socfpga: socrates: add gpio-leds	2015-06-02 14:27:11 -05:00
socfpga_vt.dts
spear3xx.dtsi	Update Viresh Kumar's email address	2015-07-17 16:39:53 -07:00
spear13xx.dtsi	Update Viresh Kumar's email address	2015-07-17 16:39:53 -07:00
spear300-evb.dts	Update Viresh Kumar's email address	2015-07-17 16:39:53 -07:00
spear300.dtsi	Update Viresh Kumar's email address	2015-07-17 16:39:53 -07:00
spear310-evb.dts	Update Viresh Kumar's email address	2015-07-17 16:39:53 -07:00
spear310.dtsi	Update Viresh Kumar's email address	2015-07-17 16:39:53 -07:00
spear320-evb.dts	Update Viresh Kumar's email address	2015-07-17 16:39:53 -07:00
spear320-hmi.dts
spear320.dtsi	Update Viresh Kumar's email address	2015-07-17 16:39:53 -07:00
spear600-evb.dts
spear600.dtsi
spear1310-evb.dts	Update Viresh Kumar's email address	2015-07-17 16:39:53 -07:00
spear1310.dtsi	Update Viresh Kumar's email address	2015-07-17 16:39:53 -07:00
spear1340-evb.dts	Update Viresh Kumar's email address	2015-07-17 16:39:53 -07:00
spear1340.dtsi	Update Viresh Kumar's email address	2015-07-17 16:39:53 -07:00
st-pincfg.h
ste-ccu8540-pinctrl.dtsi
ste-ccu8540.dts	ARM: ux500: define serial port aliases	2015-07-14 11:15:42 +02:00
ste-ccu9540.dts	ARM: ux500: define serial port aliases	2015-07-14 11:15:42 +02:00
ste-dbx5x0.dtsi	ARM: ux500: remove regulator-compatible usage	2015-11-17 14:51:23 +01:00
ste-href-ab8500.dtsi
ste-href-ab8505.dtsi
ste-href-family-pinctrl.dtsi
ste-href-stuib.dtsi	ARM: ux500: push down Rohm TS to STUIB	2015-11-17 09:37:09 +01:00
ste-href-tvk1281618.dtsi	ARM: ux500: configure the sensors on the TVK board correctly	2015-12-01 14:48:12 +01:00
ste-href.dtsi	ARM: ux500: fix MMC/SD card regression	2015-07-14 11:15:57 +02:00
ste-hrefprev60-stuib.dts	ARM: ux500: define serial port aliases	2015-07-14 11:15:42 +02:00
ste-hrefprev60-tvk.dts	ARM: ux500: define serial port aliases	2015-07-14 11:15:42 +02:00
ste-hrefprev60.dtsi	ARM: ux500: fix MMC/SD card regression	2015-07-14 11:15:57 +02:00
ste-hrefv60plus-stuib.dts	ARM: ux500: define serial port aliases	2015-07-14 11:15:42 +02:00
ste-hrefv60plus-tvk.dts	ARM: ux500: define serial port aliases	2015-07-14 11:15:42 +02:00
ste-hrefv60plus.dtsi	ARM: ux500: push down Rohm TS to STUIB	2015-11-17 09:37:09 +01:00
ste-nomadik-nhk15.dts	ARM: nomadik: push accelerometer down to boards	2015-08-11 15:29:59 +02:00
ste-nomadik-pinctrl.dtsi
ste-nomadik-s8815.dts	ARM: ux500: replace legacy *,wakeup property with wakeup-source	2015-11-17 09:37:09 +01:00
ste-nomadik-stn8815.dtsi	ARM: nomadik: fix up SD/MMC DT settings	2016-02-04 13:24:08 -08:00
ste-snowball.dts	ARM: ux500: Assign proper sensor IRQs for Snowball	2015-11-17 09:37:09 +01:00
ste-u300.dts	ARM: u300: remove regulator-compatible usage	2015-11-17 14:53:12 +01:00
stih41x-b2000.dtsi
stih41x-b2020.dtsi
stih41x-b2020x.dtsi
stih41x.dtsi
stih407-b2120.dts	ARM: dts: Enable Ethernet on STi's B2120 boards	2015-10-15 13:45:56 +02:00
stih407-clock.dtsi	ARM: STi: DT: Rename st_pll3200c32_407_c0_x into st_pll3200c32_cx_x	2015-07-22 11:41:33 +02:00
stih407-family.dtsi	ARM: DT updates for v4.4	2015-11-10 15:06:26 -08:00
stih407-pinctrl.dtsi	ARM: dts: Fix RGMII pinctrl timings	2015-10-15 13:45:46 +02:00
stih407.dtsi	Highlights:	2015-10-06 16:25:00 +02:00
stih410-b2120.dts	ARM: dts: Enable Ethernet on STi's B2120 boards	2015-10-15 13:45:56 +02:00
stih410-clock.dtsi	ARM: STi: DT: Rename st_pll3200c32_407_c0_x into st_pll3200c32_cx_x	2015-07-22 11:41:33 +02:00
stih410-pinctrl.dtsi	ARM: STi: DT: STiH410: Add pinctl config for usb controllers.	2014-11-18 12:54:55 +01:00
stih410.dtsi	Highlights:	2015-10-06 16:25:00 +02:00
stih415-b2000.dts
stih415-b2020.dts
stih415-clock.dtsi
stih415-pinctrl.dtsi
stih415.dtsi	ARM: STi: DT: Move reset controller constants into common location	2015-08-03 13:13:44 +02:00
stih416-b2000.dts
stih416-b2020.dts	ARM: STi: DT: STiH416: Change miphy356 node name to phy@fe382000	2014-11-18 12:54:56 +01:00
stih416-b2020e.dts	ARM: STi: STiH416-b2020e: Enable PWM on the B2020 Rev-E	2015-05-13 10:41:41 +02:00
stih416-clock.dtsi
stih416-pinctrl.dtsi	ARM: STi: STiH416: Add Pinctrl settings for PWM	2015-05-13 10:41:40 +02:00
stih416.dtsi	ARM: STi: DT: Move reset controller constants into common location	2015-08-03 13:13:44 +02:00
stih418-b2199.dts	ARM: dts: Enable Ethernet on STi's B2199 board	2015-10-15 13:45:59 +02:00
stih418-clock.dtsi	ARM: STi: DT: Add support for stih418 A9 pll	2015-10-15 13:48:16 +02:00
stih418.dtsi	ARM: DT: STi: STiH418: Fix mmc0 clock configuration	2015-09-30 11:18:01 +02:00
stihxxx-b2120.dtsi	[media] c8sectpfe: Update binding to reset-gpios	2015-11-18 13:32:58 -02:00
stm32f429-disco.dts	ARM: dts: Use stdout-path in STM32F429 Discovery board	2015-07-23 07:07:12 +02:00
stm32f429.dtsi	ARM: dts: stm32f429: Adopt STM32 RNG driver	2015-10-14 22:23:37 +08:00
stm32429i-eval.dts	ARM: dts: Add STM32429i-EVAL board support	2015-07-23 06:59:50 +02:00
sun4i-a10-a1000.dts	ARM: sun4i: Enable audio-codec on Mele A1000	2015-10-22 10:55:52 +02:00
sun4i-a10-ba10-tvbox.dts	ARM: dts: sun4i: Enable otg controller on the ba10-tvbox	2015-07-06 13:36:08 +02:00
sun4i-a10-chuwi-v7-cw0825.dts	ARM: dts: sun4i: Enable i2c1 and i2c2 on the Chuwi V7-CW0825 tablet	2015-09-13 14:21:17 +02:00
sun4i-a10-cubieboard.dts	ARM: sun4i: Enable cubieboard audio codec	2015-10-22 10:57:19 +02:00
sun4i-a10-gemei-g9.dts	ARM: dts: sun4i: gemei-g9: Enable PA GPIO pin configuration	2015-12-18 22:19:18 +01:00
sun4i-a10-hackberry.dts	ARM: dts: sun4i: Add A10 SRAM and SRAM controller	2015-06-01 11:13:26 +02:00
sun4i-a10-hyundai-a7hd.dts	ARM: sunxi: dt: Remove the FSF address	2015-05-10 10:22:23 +02:00
sun4i-a10-inet1.dts	ARM: dts: sun4i: Add touchscreen node to iNet1 tablet	2015-11-24 08:36:42 +01:00
sun4i-a10-inet9f-rev03.dts	ARM: dts: sun4i: inet9f-rev03: Add support for game buttons / joysticks	2015-11-17 09:40:07 +01:00
sun4i-a10-inet97fv2.dts	ARM: dts: sun4i: inet97fv2: Enable i2c1 and i2c2 controllers	2015-09-27 10:21:20 +02:00
sun4i-a10-itead-iteaduino-plus.dts	ARM: dts: sun4i: Add Iteaduino Plus A10	2015-07-21 14:36:58 +02:00
sun4i-a10-jesurun-q5.dts	ARM: dts: sun4i: Enable otg in host only mode on Jesurun Q5	2015-09-13 14:21:16 +02:00
sun4i-a10-marsboard.dts	ARM: dts: sun4i: Enable audio codec on Marsboard A10.	2015-10-22 20:58:12 +02:00
sun4i-a10-mini-xplus.dts	ARM: dts: sun4i: Enable otg controller on the mini-x	2015-07-06 13:36:09 +02:00
sun4i-a10-mk802.dts	ARM: sunxi: dt: enable audio codec on mk802	2015-12-21 17:04:48 +01:00
sun4i-a10-mk802ii.dts	ARM: sunxi: dt: Remove the FSF address	2015-05-10 10:22:23 +02:00
sun4i-a10-olinuxino-lime.dts	dts: sunxi: add eeprom to A10 OLinuXino Lime board	2015-09-27 10:21:23 +02:00
sun4i-a10-pcduino.dts	ARM: dts: sun4i: Enable USB DRC on pcDuino1/2	2015-10-11 19:06:22 +02:00
sun4i-a10-pcduino2.dts	ARM: sun4i: dt: Add new LinkSprite pcDuino2 board	2015-10-11 18:50:55 +02:00
sun4i-a10-pov-protab2-ips9.dts	ARM: dts: sun4i: Enable onboard codec used on the pov protab2-ips9 tablet	2015-12-18 22:18:19 +01:00
sun4i-a10.dtsi	ARM: dts: sun4i: Add VE (Video Engine) module clock node	2015-12-08 11:06:25 +01:00
sun5i-a10s-auxtek-t003.dts	ARM: dts: sun5i: Add support for the Auxtek-T003 HDMI stick	2015-09-27 10:21:18 +02:00
sun5i-a10s-auxtek-t004.dts	ARM: dts: sun5i: Add i2c axp152 pmic support for Auxtek T004 boards	2015-11-20 17:41:57 +01:00
sun5i-a10s-mk802.dts	ARM: sunxi: dt: Remove the FSF address	2015-05-10 10:22:23 +02:00
sun5i-a10s-olinuxino-micro.dts	dts: sunxi: correct vendor prefix on OLinuXino a10s micro	2015-09-27 10:21:24 +02:00
sun5i-a10s-r7-tv-dongle.dts	ARM: sunxi: dt: Remove the FSF address	2015-05-10 10:22:23 +02:00
sun5i-a10s-wobo-i5.dts	ARM: dts: sun5i: Add dts file for the Wobo i5 top set box	2015-09-27 10:21:26 +02:00
sun5i-a10s.dtsi	ARM: dts: sun5i: Add PWM controller node for A13 / A10s	2015-10-12 15:50:20 +02:00
sun5i-a13-empire-electronix-d709.dts	ARM: dts: sun5i: Add dts file for the Empire Electronix D709 tablet	2015-12-21 17:10:18 +01:00
sun5i-a13-hsg-h702.dts	ARM: dts: sun5i: hsg-h702: Enable USB OTG controller	2015-07-31 18:59:51 +02:00
sun5i-a13-inet-98v-rev2.dts	ARM: dts: sun5i: Add dts file for inet98v_rev2 based tablets	2015-09-27 10:21:21 +02:00
sun5i-a13-olinuxino-micro.dts	ARM: sunxi: dt: Remove the FSF address	2015-05-10 10:22:23 +02:00
sun5i-a13-olinuxino.dts	ARM: dts: sun5i: Enable USB DRC on A13 OLinuxIno	2015-07-31 18:57:48 +02:00
sun5i-a13-q8-tablet.dts	ARM: dts: sun5i: Add dts file for q8 formfactor a13 based tablets	2015-09-27 10:21:30 +02:00
sun5i-a13-utoo-p66.dts	ARM: dts: sun5i: Enable onboard codec used on the UTOO P66 tablet	2015-12-18 22:18:16 +01:00
sun5i-a13.dtsi	ARM: dts: sun5i: Add PWM controller node for A13 / A10s	2015-10-12 15:50:20 +02:00
sun5i-q8-common.dtsi	ARM: dts: sun5i: Add backlight node to sun5i-q8-common.dtsi	2015-10-12 15:51:54 +02:00
sun5i-r8-chip.dts	ARM: sun5i: chip: Enable the audio codec	2015-10-22 10:55:53 +02:00
sun5i-r8.dtsi	ARM: sun5i: Add R8 DTSI	2015-10-11 19:08:49 +02:00
sun5i.dtsi	ARM: sun5i: Add the Audio codec DT node	2015-10-21 22:43:27 +02:00
sun6i-a31-app4-evb1.dts	ARM: sunxi: dt: Remove the FSF address	2015-05-10 10:22:23 +02:00
sun6i-a31-colombus.dts	ARM: dts: sun6i: Turn on gmac on Colombus	2015-10-13 20:41:49 +02:00
sun6i-a31-hummingbird.dts	ARM: dts: sun6i: hummingbird: Enable AXP221 DC5LDO regulator as "vdd-cpus"	2015-10-13 20:46:36 +02:00
sun6i-a31-i7.dts	ARM: sunxi: dt: Remove the FSF address	2015-05-10 10:22:23 +02:00
sun6i-a31-m9.dts	ARM: dts: sun6i: Add a dts file for the Mele A1000G quad top set box	2015-06-02 23:39:46 +02:00
sun6i-a31-mele-a1000g-quad.dts	ARM: dts: sun6i: Enable USB DRC on the Mele A1000G quad	2015-07-06 13:35:53 +02:00
sun6i-a31.dtsi	ARM: dts: sun6i: Add simplefb node labels to reference at board level	2015-10-23 08:04:49 +02:00
sun6i-a31s-cs908.dts	ARM: dts: sun6i: Enable otg controller on the cs908	2015-07-06 13:36:10 +02:00
sun6i-a31s-primo81.dts	ARM: dts: sunxi: sun6i-a31s-primo81.dts: add touchscreen axis swapping property	2015-11-17 09:40:49 +01:00
sun6i-a31s-sina31s-core.dtsi	ARM: dts: sun6i: Add support for Sinlinx A31s SDK board	2015-10-19 20:04:08 +02:00
sun6i-a31s-sina31s.dts	ARM: dts: sun6i: Add support for Sinlinx A31s SDK board	2015-10-19 20:04:08 +02:00
sun6i-a31s-sinovoip-bpi-m2.dts	ARM: dts: sun6i: Add a dts file for the Sinovoip BPI-M2 board	2015-10-17 18:24:11 +02:00
sun6i-a31s-yones-toptech-bs1078-v2.dts	dts: sun6i: yones toptech bs1078 v2: Add AXP221 support to dts	2015-11-17 09:40:07 +01:00
sun6i-a31s.dtsi	ARM: sunxi: dt: Remove the FSF address	2015-05-10 10:22:23 +02:00
sun7i-a20-bananapi.dts	ARM: dts: sun7i: Enable audio codec on BananaPi	2015-11-23 20:53:08 +01:00
sun7i-a20-bananapro.dts	ARM: dts: sun7i: Add uart4 support for BananaPro, disable uart2	2015-06-01 11:08:29 +02:00
sun7i-a20-cubieboard2.dts	ARM: sun7i: Enable cubieboard2 audio codec	2015-10-22 10:55:47 +02:00
sun7i-a20-cubietruck.dts	ARM: sun7i: dt: enable audio codec on Cubietruck	2015-10-22 10:55:33 +02:00
sun7i-a20-hummingbird.dts	ARM: sunxi: dt: Split the SPI pinctrl groups	2015-05-10 10:23:56 +02:00
sun7i-a20-i12-tvbox.dts	ARM: sunxi: dt: Convert users to the PIO interrupts binding	2015-07-28 14:41:50 +02:00
sun7i-a20-icnova-swac.dts	arm: sun7i: Add sun7i-a20-icnova-swac.dts	2015-11-17 09:40:07 +01:00
sun7i-a20-m3.dts	ARM: sunxi: dt: Remove the FSF address	2015-05-10 10:22:23 +02:00
sun7i-a20-mk808c.dts	ARM: dt: sun7i: Enable audio codec on MK808C	2015-12-21 17:05:06 +01:00
sun7i-a20-olimex-som-evb.dts	ARM: dts: sun7i: Olimex A20-SOM-EVB: Enable mmc3 (baseboard SD socket)	2015-12-11 09:21:29 +01:00
sun7i-a20-olinuxino-lime.dts	dts: sunxi: add eeprom to A20 OLinuXino Lime board	2015-09-27 10:21:24 +02:00
sun7i-a20-olinuxino-lime2.dts	dts: sunxi: add eeprom to A20 OLinuXino Lime2 board	2015-09-27 10:21:25 +02:00
sun7i-a20-olinuxino-micro.dts	dts: sunxi: add eeprom to A20 OLinuXino micro board	2015-09-27 10:21:25 +02:00
sun7i-a20-orangepi-mini.dts	ARM: dts: sun7i: Enable audio codec on OrangePi Mini	2015-11-23 20:53:05 +01:00
sun7i-a20-orangepi.dts	ARM: dts: sun7i: Enable USB DRC on the Orange pi	2015-09-29 09:55:00 +02:00
sun7i-a20-pcduino3-nano.dts	ARM: sun7i: dt: Enable audio codec on pcDuino V3 Nano	2015-11-17 09:40:07 +01:00
sun7i-a20-pcduino3.dts	ARM: dts: sun7i: Enable audio codec on pcDuino	2015-11-17 09:40:07 +01:00
sun7i-a20-wexler-tab7200.dts	ARM: dts: sun7i: Add PA gpio pin to Wexler TAB7200 tablet	2015-12-21 16:45:08 +01:00
sun7i-a20-wits-pro-a20-dkt.dts	ARM: dts: sun7i: Enable gmac on Wits Pro A20 DKT	2015-12-21 17:08:36 +01:00
sun7i-a20.dtsi	ARM: dts: sun7i: Add VE (Video Engine) module clock node	2015-12-08 11:06:28 +01:00
sun8i-a23-a33.dtsi	ARM: dts: sun8i: Add simplefb node labels to reference at board level	2015-11-20 12:13:23 +01:00
sun8i-a23-evb.dts	ARM: sun8i: Introduce A23 Evaluation Board Support	2015-06-01 11:08:24 +02:00
sun8i-a23-gt90h-v4.dts	ARM: dts: sun8i: Add support for qt90h-v4 tablets	2015-09-27 10:21:16 +02:00
sun8i-a23-ippo-q8h-v1.2.dts	ARM: dts: sun8i: Make ippo-q8h-v*.dts a symlink to q8-tablet.dts	2015-10-13 20:40:57 +02:00
sun8i-a23-ippo-q8h-v5.dts	ARM: dts: sun8i: Make ippo-q8h-v*.dts a symlink to q8-tablet.dts	2015-10-13 20:40:57 +02:00
sun8i-a23-q8-tablet.dts	ARM: dts: sun8i: Add sun8i-a23-q8-tablet.dts file	2015-10-13 20:40:17 +02:00
sun8i-a23.dtsi	ARM: sun8i: A23: Add missing msgbox gate	2015-09-27 10:21:31 +02:00
sun8i-a33-et-q8-v1.6.dts	ARM: dts: sun8i: Make et-q8-v1.6.dts a symlink to q8-tablet.dts	2015-10-13 20:41:28 +02:00
sun8i-a33-ga10h-v1.1.dts	ARM: dts: sun8i: Enable USB host on GA10H-A33 tablets	2015-07-06 13:36:01 +02:00
sun8i-a33-ippo-q8h-v1.2.dts	ARM: dts: sun8i: Make ippo-q8h-v1.2.dts a symlink to q8-tablet.dts	2015-09-28 10:33:56 +02:00
sun8i-a33-q8-tablet.dts	ARM: dts: sun8i: Add sun8i-a33-q8-tablet.dts file	2015-09-28 10:33:44 +02:00
sun8i-a33-sinlinx-sina33.dts	ARM: dts: sun8i: sinlinx-sina33: Enable Reduced Serial Bus controller	2015-10-07 10:56:32 +01:00
sun8i-a33.dtsi	ARM: dts: sun8i-a33: Add security system crypto engine clock and device nodes	2015-09-27 10:21:32 +02:00
sun8i-h3-orangepi-plus.dts	ARM: dts: sun8i: Add Orange Pi Plus support	2015-12-08 09:32:47 +01:00
sun8i-h3.dtsi	ARM: dts: sunxi: Add Allwinner H3 DTSI	2015-12-08 09:28:24 +01:00
sun8i-q8-common.dtsi	ARM: dts: sun8i: q8-common: Enable RSB controller for A23/A33 Q8 tablets	2015-10-07 10:56:16 +01:00
sun9i-a80-cubieboard4.dts	ARM: dts: sun9i: cubieboard4: Enable Reduced Serial Bus controller	2015-12-10 18:04:36 +01:00
sun9i-a80-optimus.dts	ARM: dts: sun9i: optimus: Enable Reduced Serial Bus controller	2015-12-01 14:10:16 +01:00
sun9i-a80.dtsi	ARM: dts: sun9i: Add NMI controller device node	2015-12-03 10:45:58 +01:00
sunxi-common-regulators.dtsi	ARM: dts: sunxi: Add regulator-boot-on to usb host port regulator nodes	2015-07-06 13:36:06 +02:00
sunxi-q8-common.dtsi	ARM: dts: sunxi: Enable PWM controller on Q8 format tablets	2015-10-12 15:51:32 +02:00
tango4-common.dtsi	ARM: dts: tango4: Initial device trees	2015-12-22 15:12:07 -08:00
tango4-smp8758.dtsi	ARM: dts: tango4: Initial device trees	2015-12-22 15:12:07 -08:00
tango4-vantage-1172.dts	ARM: dts: tango4: Initial device trees	2015-12-22 15:12:07 -08:00
tegra20-colibri-512.dtsi
tegra20-harmony.dts	ARM: dts: tegra: move serial aliases to per-board	2014-11-13 16:58:52 +01:00
tegra20-iris-512.dts	ARM: dts: tegra: move serial aliases to per-board	2014-11-13 16:58:52 +01:00
tegra20-medcom-wide.dts	ARM: dts: tegra: move serial aliases to per-board	2014-11-13 16:58:52 +01:00
tegra20-paz00.dts	ARM: dts: tegra: move serial aliases to per-board	2014-11-13 16:58:52 +01:00
tegra20-plutux.dts
tegra20-seaboard.dts	ARM: tegra: Add missing HDMI +5V regulator	2015-05-04 14:01:55 +02:00
tegra20-tamonten.dtsi	ARM: dts: tegra: move serial aliases to per-board	2014-11-13 16:58:52 +01:00
tegra20-tec.dts
tegra20-trimslice.dts	ARM: dts: tegra: move serial aliases to per-board	2014-11-13 16:58:52 +01:00
tegra20-ventana.dts	ARM: dts: tegra: move serial aliases to per-board	2014-11-13 16:58:52 +01:00
tegra20-whistler.dts	ARM: dts: tegra: move serial aliases to per-board	2014-11-13 16:58:52 +01:00
tegra20.dtsi	ARM: DT updates for v4.4	2015-11-10 15:06:26 -08:00
tegra30-apalis-eval.dts	ARM: tegra: apalis-eval: Fix power/wakeup key	2015-09-15 11:22:38 +02:00
tegra30-apalis.dtsi	ARM: tegra: apalis: Properly align pin names	2015-09-15 11:22:36 +02:00
tegra30-beaver.dts	ARM: tegra: Use generated pinmux for Beaver board	2015-03-24 10:51:14 +01:00
tegra30-cardhu-a02.dts
tegra30-cardhu-a04.dts
tegra30-cardhu.dtsi	ARM: tegra: Cardhu device-tree comment spelling fix	2015-05-05 13:42:56 +02:00
tegra30-colibri-eval-v3.dts	ARM: tegra: colibri-eval: Fix power/wakeup key	2015-09-15 11:22:46 +02:00
tegra30-colibri.dtsi	ARM: tegra: colibri: Properly align pin names	2015-09-15 11:22:44 +02:00
tegra30.dtsi	ARM: DT updates for v4.4	2015-11-10 15:06:26 -08:00
tegra114-dalmore.dts	ARM: dts: tegra: move serial aliases to per-board	2014-11-13 16:58:52 +01:00
tegra114-roth.dts	ARM: tegra: roth: Fix SD card VDD_IO regulator	2014-11-13 16:58:53 +01:00
tegra114-tn7.dts	ARM: tegra: Remove eMMC vmmc property for roth/tn7	2014-11-13 16:58:52 +01:00
tegra114.dtsi	ARM: tegra: Comment out gpio-ranges properties	2015-10-15 17:58:43 +02:00
tegra124-jetson-tk1-emc.dtsi	ARM: tegra: Add EMC timings to Jetson TK1 device tree	2015-03-30 11:43:38 +02:00
tegra124-jetson-tk1.dts	ARM: tegra: jetson-tk1: Add GK20A GPU DT node	2015-08-21 18:44:27 +02:00
tegra124-nyan-big-emc.dtsi	ARM: tegra: Add EMC timings to Nyan Big device tree	2015-03-30 11:43:39 +02:00
tegra124-nyan-big.dts	ARM: tegra: Add EMC timings to Nyan Big device tree	2015-03-30 11:43:39 +02:00
tegra124-nyan-blaze-emc.dtsi	ARM: tegra: Add EMC timings to Nyan Blaze device tree	2015-03-30 11:43:39 +02:00
tegra124-nyan-blaze.dts	ARM: tegra: Add EMC timings to Nyan Blaze device tree	2015-03-30 11:43:39 +02:00
tegra124-nyan.dtsi	ARM: tegra: Fix suspend hang on Tegra124 Chromebooks	2015-12-22 15:41:37 -08:00
tegra124-venice2.dts	ARM: tegra: venice2: Add GK20A GPU DT node	2015-08-21 18:44:26 +02:00
tegra124.dtsi	ARM: DT updates for v4.4	2015-11-10 15:06:26 -08:00
tny_a9g20.dts
tny_a9260.dts
tny_a9260_common.dtsi
tny_a9263.dts
tps6507x.dtsi
tps65910.dtsi
twl4030.dtsi	Revert "ARM: dts: twl4030: Add iio properties for bci subnode"	2015-11-06 21:17:53 +01:00
twl4030_omap3.dtsi	ARM: dts: twl4030: Use OMAP3_CORE1_IOPAD pinmux macro	2015-11-30 08:43:29 -08:00
twl6030.dtsi
twl6030_omap4.dtsi	ARM: dts: twl6030: Use OMAP4_IOPAD pinmux macro	2015-11-30 08:43:31 -08:00
uniphier-common32.dtsi	ARM: dts: uniphier: factor out common nodes to uniphier-common32.dtsi	2015-12-12 00:24:50 +01:00
uniphier-ph1-ld4-ref.dts	ARM: dts: uniphier: use stdout-path instead of console	2015-10-23 22:10:42 +02:00
uniphier-ph1-ld4.dtsi	ARM: dts: uniphier: factor out common nodes to uniphier-common32.dtsi	2015-12-12 00:24:50 +01:00
uniphier-ph1-ld6b-ref.dts	ARM: DT updates for v4.4	2015-11-10 15:06:26 -08:00
uniphier-ph1-ld6b.dtsi	ARM: dts: uniphier: fix a typo in comment block	2015-12-31 17:28:19 +01:00
uniphier-ph1-pro4-ref.dts	ARM: dts: uniphier: use stdout-path instead of console	2015-10-23 22:10:42 +02:00
uniphier-ph1-pro4.dtsi	ARM: dts: uniphier: factor out common nodes to uniphier-common32.dtsi	2015-12-12 00:24:50 +01:00
uniphier-ph1-pro5.dtsi	ARM: dts: uniphier: factor out common nodes to uniphier-common32.dtsi	2015-12-12 00:24:50 +01:00
uniphier-ph1-sld3-ref.dts	ARM: dts: uniphier: use stdout-path instead of console	2015-10-23 22:10:42 +02:00
uniphier-ph1-sld3.dtsi	ARM: dts: uniphier: add system-bus-controller nodes	2015-10-31 01:58:06 +00:00
uniphier-ph1-sld8-ref.dts	ARM: dts: uniphier: use stdout-path instead of console	2015-10-23 22:10:42 +02:00
uniphier-ph1-sld8.dtsi	ARM: dts: uniphier: factor out common nodes to uniphier-common32.dtsi	2015-12-12 00:24:50 +01:00
uniphier-pinctrl.dtsi	ARM: dts: uniphier: add I2C controller device nodes	2015-08-11 15:09:21 +02:00
uniphier-proxstream2-gentil.dts	ARM: dts: uniphier: add I2C aliases for ProXstream2 boards	2015-10-26 10:34:40 +09:00
uniphier-proxstream2-vodka.dts	ARM: dts: uniphier: add I2C aliases for ProXstream2 boards	2015-10-26 10:34:40 +09:00
uniphier-proxstream2.dtsi	ARM: dts: uniphier: factor out common nodes to uniphier-common32.dtsi	2015-12-12 00:24:50 +01:00
uniphier-ref-daughter.dtsi	ARM: dts: UniPhier: add reference daughter board	2015-08-11 15:20:56 +02:00
uniphier-support-card.dtsi	ARM: dts: UniPhier: add support for UniPhier SoCs and boards	2015-05-12 16:56:27 +02:00
usb_a9g20-dab-mmx.dtsi
usb_a9g20.dts
usb_a9g20_common.dtsi
usb_a9g20_lpw.dts
usb_a9260.dts
usb_a9260_common.dtsi	ARM: at91/dt: replace gpio-key,wakeup with wakeup-source property	2015-11-16 15:53:04 +01:00
usb_a9263.dts	ARM: at91/dt: replace gpio-key,wakeup with wakeup-source property	2015-11-16 15:53:04 +01:00
versatile-ab.dts	ARM: DT updates for v4.5	2016-01-20 18:16:29 -08:00
versatile-pb.dts	ARM: versatile: fix MMC/SD interrupt assignment	2016-01-07 06:32:19 +01:00
vexpress-v2m-rs1.dtsi	ARM: dts: vexpress: Use assigned-clock-parents for sp810	2015-08-18 13:17:27 -07:00
vexpress-v2m.dtsi	ARM: dts: vexpress: Use assigned-clock-parents for sp810	2015-08-18 13:17:27 -07:00
vexpress-v2p-ca5s.dts
vexpress-v2p-ca9.dts	ARM: vexpress/ca9: Add interrupt-affinity to the PMU node	2015-05-12 16:39:43 +02:00
vexpress-v2p-ca15-tc1.dts
vexpress-v2p-ca15_a7.dts	arm: dts: vexpress: add missing CCI PMU device node to TC2	2015-07-08 14:44:55 -07:00
vf-colibri-eval-v3.dtsi	ARM: dts: vf-colibri: define stdout-path property	2015-08-11 23:15:22 +08:00
vf-colibri.dtsi	ARM: dts: vf-colibri: add CAN support	2015-12-22 20:43:38 +08:00
vf500-colibri-eval-v3.dts	ARM: dts: vf500-colibri: Add device tree node for touchscreen support	2015-10-19 22:45:19 +08:00
vf500-colibri.dtsi	ARM: dts: vf500-colibri: Add device tree node for touchscreen support	2015-10-19 22:45:19 +08:00
vf500.dtsi	ARM: dts: vf610: add Miscellaneous System Control Module (MSCM)	2015-03-30 16:43:48 +08:00
vf610-colibri-eval-v3.dts	ARM: dts: vf500-colibri: add Colibri VF50 support	2014-11-23 15:08:10 +08:00
vf610-colibri.dtsi	ARM: dts: vf610: use reset values for L2 cache latencies	2015-12-11 21:32:47 +08:00
vf610-cosmic.dts	ARM: dts: vf610: Nomenclature fixup for PTC12 pin used in RMII mode.	2015-06-03 15:04:00 +08:00
vf610-pinfunc.h	ARM: dts: vf610: Nomenclature fixup for PTC12 pin used in RMII mode.	2015-06-03 15:04:00 +08:00
vf610-twr.dts	ARM: dts: vf610twr: add NAND flash controller peripherial	2015-10-19 22:45:24 +08:00
vf610.dtsi	ARM: dts: vf610: use reset values for L2 cache latencies	2015-12-11 21:32:47 +08:00
vf610m4-colibri.dts	ARM: dts: add support for Vybrid running on Cortex-M4	2015-05-20 23:08:11 +02:00
vf610m4-cosmic.dts	ARM: dts: vf6xx: Cosmic+: M4(nommu) initial support	2015-12-22 20:42:25 +08:00
vf610m4.dtsi	ARM: dts: add support for Vybrid running on Cortex-M4	2015-05-20 23:08:11 +02:00
vfxxx.dtsi	ARM: dts: vfxxx: Include support for dspi[23] functionality.	2015-12-22 20:42:24 +08:00
vt8500-bv07.dts
vt8500.dtsi
wm8505-ref.dts
wm8505.dtsi	dts: vt8500: Fix errors in SDHC node for WM8505	2016-01-07 16:04:32 +01:00
wm8650-mid.dts
wm8650.dtsi	dts: vt8500: Add SDHC node to DTS file for WM8650	2016-01-07 16:02:53 +01:00
wm8750-apc8750.dts
wm8750.dtsi	ARM: dts: WM8750: fix cpu compatible value	2015-10-23 21:59:38 +02:00
wm8850-w70v2.dts
wm8850.dtsi
xenvm-4.2.dts
zx296702-ad1.dts	ARM: dts: zx: add an initial zx296702 dts and doc	2015-06-11 16:18:30 -07:00
zx296702.dtsi	ARM: dts: zx: add an initial zx296702 dts and doc	2015-06-11 16:18:30 -07:00
zynq-7000.dtsi	ARM: dt: zynq: Add labels to cpu nodes to allow overriding OPPs.	2015-12-14 09:48:39 +01:00
zynq-parallella.dts	ARM: dts: zynq: Fix stdout-path and bootargs	2015-05-28 08:44:56 +02:00
zynq-zc702.dts	ARM: dts: zynq: replace gpio-key,wakeup with wakeup-source property	2015-12-14 09:30:03 +01:00
zynq-zc706.dts	ARM: dts: zynq: Fix stdout-path and bootargs	2015-05-28 08:44:56 +02:00
zynq-zed.dts	ARM: dts: zynq: Fix stdout-path and bootargs	2015-05-28 08:44:56 +02:00
zynq-zybo.dts	ARM: dts: zynq: Fix stdout-path and bootargs	2015-05-28 08:44:56 +02:00