Add 7-pin DIN standard
parent
7f5cc8a888
commit
6f62ddb799
22
README.md
22
README.md
|
@ -17,7 +17,14 @@ into USB ports.
|
||||||
|
|
||||||
|
|
||||||
# Pins
|
# Pins
|
||||||
Pins on the MP-101 cable.
|
Not all cables have the same color pin out. In fact, most have different
|
||||||
|
pinouts, so each cable should be tested.
|
||||||
|
|
||||||
|
## Pins from Bescor 50 Foot Extension Cable
|
||||||
|
Pins on the MP-101 50 foot extension cable.
|
||||||
|
|
||||||
|
Note, the pin ordering standard is different than I used below.
|
||||||
|
The standard doesn't go in order.
|
||||||
Starting at "7PM", just after the key, going clockwise:
|
Starting at "7PM", just after the key, going clockwise:
|
||||||
|
|
||||||
```
|
```
|
||||||
|
@ -34,9 +41,22 @@ GND Red 7 GND under ICSP 7 GND
|
||||||
|
|
||||||
The "ArduinoPin" column is how the Arduino pins on the Panda are labelled.
|
The "ArduinoPin" column is how the Arduino pins on the Panda are labelled.
|
||||||
|
|
||||||
|
|
||||||
|
##
|
||||||
|
The standard DIN pin ordering for a 7-pin connector is below:
|
||||||
|
|
||||||
|
![7 Pin DIN Connector Pinout](img/DIN_connector_pinout-7pin.png)
|
||||||
|
From: https://en.wikipedia.org/wiki/DIN_connector
|
||||||
|
|
||||||
|
|
||||||
|
## Pins from Bescor 50 Foot Extension Cable
|
||||||
|
|
||||||
|
|
||||||
|
## Pi 4
|
||||||
On the Raspberry Pi 4, with Raspbian installed running `pinout` will
|
On the Raspberry Pi 4, with Raspbian installed running `pinout` will
|
||||||
majickally print the pinouts.
|
majickally print the pinouts.
|
||||||
|
|
||||||
|
|
||||||
# Wire Harness
|
# Wire Harness
|
||||||
I made a quick and dirty wire harness that works.
|
I made a quick and dirty wire harness that works.
|
||||||
My MP101 kit came with two extension cables.
|
My MP101 kit came with two extension cables.
|
||||||
|
|
Binary file not shown.
After Width: | Height: | Size: 131 KiB |
Loading…
Reference in New Issue