42 lines
1.5 KiB
Markdown
42 lines
1.5 KiB
Markdown
# Frequently Asked Questions
|
|
|
|
## What ports oputbound does Farmbot OS use
|
|
|
|
* AMQP: 5672
|
|
* HTTP(S): 80 + 443 (this is configurable)
|
|
* NTP: UDP 123
|
|
|
|
## My bot doesn't boot on a fresh SD card
|
|
|
|
This could be one of a few things. These things are in order of probability.
|
|
|
|
* Your farmbot doesn't have enough power. You NEED a good power supply at
|
|
least 5 volts and 2.5 Amps for farmbot to boot reliably.
|
|
* Is the power LED flashing? If yes you need more amps.
|
|
* Is the Green LED flashing? If no you need more amps.
|
|
* Your Arduino wasn't detected.
|
|
* You have more than one UART device.
|
|
* You have a bad flash.
|
|
* If you used `dd` to write the image, try setting `BS` to a lower value.
|
|
* if you used win32 disk imager try safely removing the SD card
|
|
* You have a bad SD Card.
|
|
* You aren't using a Raspberry Pi 3.
|
|
|
|
## Why can't I update my Arduino Firmware
|
|
|
|
As of version 3.8.0 we decided to bundle the arduino firmware into farmbot os.
|
|
There was a couple reasons for this.
|
|
|
|
* There is no more version conflicts between the firmware and operating system.
|
|
* Applying updates during farmbot os runtime can be dangerous and was leaving
|
|
peoples bot's unusable because of broken firmwares.
|
|
|
|
## Can the shell run on HDMI
|
|
|
|
No. Farmbot is designed to operate without the use of a monitor.
|
|
|
|
## Why aren't [X] or [Y] packages included
|
|
|
|
See the above answer. [Raise an issue](https://github.com/FarmBot/farmbot_os/issues/new)
|
|
to request a package. Future versions of FarmBotOS may provide a plugin system.
|
|
It is not implemented yet. |