2f467fef65
add pics of Dirty PCBs
2019-11-25 14:51:13 -07:00
844db0b17a
note
2019-11-22 14:46:34 -07:00
c2499e0070
Export Gerbers, make BoM for ProtoExpress build
2019-11-22 14:45:09 -07:00
60767b647b
Update the format of BOM spreadsheet
...
Signed-off-by: zisi <agzisim@gmail.com>
2018-09-06 15:18:47 +03:00
dd6beb5fe1
Ignore backup kicad file
...
Signed-off-by: zisi <agzisim@gmail.com>
2018-07-26 19:55:10 +03:00
45aa9e9341
A drawing for drill holes
...
Update BOM with new stock material
Signed-off-by: zisi <agzisim@gmail.com>
2018-07-26 19:50:12 +03:00
5a42df2fbf
Move files for rotary encoder to other repository
...
Rotary encoder new repository, https://gitlab.com/librespacefoundation/satnogs/satnogs-rotator-controller-encoder
Signed-off-by: zisi <agzisim@gmail.com>
2018-05-26 20:20:43 +03:00
3929f345c5
Change mounting holes to D3.2mm
...
Signed-off-by: zisi <agzisim@gmail.com>
2018-05-26 19:32:28 +03:00
dc866ef410
Rotator controller migration to Kicad 5
...
Signed-off-by: zisi <agzisim@gmail.com>
2018-04-23 20:00:54 +03:00
0e85912bab
Migration to kicad 5
...
Signed-off-by: zisi <agzisim@gmail.com>
2018-04-23 18:11:28 +03:00
9d3965b5ef
Update reademe file with correct documentation
...
Signed-off-by: zisi <agzisim@gmail.com>
2018-04-23 17:24:31 +03:00
3fdd7007a6
Update BOM
...
Add new screw M3 L30 DIN965
Add bidirectional TVS Diode
Signed-off-by: zisi <agzisim@gmail.com>
2018-04-23 17:16:36 +03:00
db75baae0e
Resolve collision with encoder mount
...
Add correct DIN for screw M3 L30
Add set screw in assembly
Signed-off-by: zisi <agzisim@gmail.com>
2018-04-23 17:14:47 +03:00
3d7ed2a3d1
Add missing part in assembly, M3 nut
...
Signed-off-by: zisi <agzisim@gmail.com>
2018-04-23 17:12:49 +03:00
4cf5d5d9ae
Add only parts that are needed by controller
...
Update the TVS diode to bidirectional
Rename all parts
Delete all parts that aren't needed by controller
Update BOM
Signed-off-by: zisi <agzisim@gmail.com>
2018-04-01 21:13:08 +03:00
b067bfa695
Add RS485 RX missing pull-up resistor ( closes #37 )
...
Signed-off-by: Manthos Papamatthaiou <papamat@gmail.com>
2018-02-26 20:21:25 +02:00
bcec0b824f
Merge branch 'update-bom-v2' into 'master'
...
Update bom v2
See merge request librespacefoundation/satnogs/satnogs-rotator-controller!32
2018-02-25 14:22:37 +00:00
3ebcdfa96c
Finalize BOM
...
Signed-off-by: zisi <agzisim@gmail.com>
2018-02-25 16:08:54 +02:00
b6d6331c17
Update BOM WIP, #13
...
Signed-off-by: zisi <agzisim@gmail.com>
2018-02-10 14:40:46 +02:00
daa73f9d11
Change the OD of bearing mount
...
Signed-off-by: zisi <agzisim@gmail.com>
2018-01-28 19:35:21 +02:00
c13d24496f
Merge branch 'freecad-models' into 'master'
...
Resolve issue #36
Closes #36
See merge request librespacefoundation/satnogs/satnogs-rotator-controller!31
2018-01-27 18:21:41 +00:00
eac9be8ac4
Resolve issue #36
...
Signed-off-by: zisi <agzisim@gmail.com>
2018-01-27 20:11:38 +02:00
7e0b38bc55
Merge branch 'step-models' into 'master'
...
Step models
See merge request librespacefoundation/satnogs/satnogs-rotator-controller!30
2018-01-21 13:17:24 +00:00
7cddd4d4ac
Add step models to generate 3D model of controller
...
Signed-off-by: zisi <agzisim@gmail.com>
2018-01-21 15:16:24 +02:00
b0820ce7e2
Merge branch 'as5601-encoder-updates' into 'master'
...
As5601 encoder updates
See merge request librespacefoundation/satnogs/satnogs-rotator-controller!29
2018-01-21 12:42:34 +00:00
fc28d7c5f6
Remove unused layers
...
Signed-off-by: zisi <agzisim@gmail.com>
2018-01-21 14:40:39 +02:00
55ff00a3c9
Update path for satnogs library
...
Signed-off-by: zisi <agzisim@gmail.com>
2018-01-21 14:40:39 +02:00
e92f0f9e29
Merge branch 'fuse-change' into 'master'
...
Minor changes in rotator controller PCB
Closes #34 and #32
See merge request librespacefoundation/satnogs/satnogs-rotator-controller!28
2018-01-21 12:36:20 +00:00
379189923d
Remove from F.Silk pcb mounts
...
Signed-off-by: zisi <agzisim@gmail.com>
2017-12-07 19:10:38 +02:00
c1959280d2
Resolve issue #34
...
Signed-off-by: zisi <agzisim@gmail.com>
2017-12-07 19:06:10 +02:00
e704eb58d3
Add clear polarizationo silkscreen to DO-214
...
Signed-off-by: zisi <agzisim@gmail.com>
2017-11-17 20:56:42 +02:00
3d4db1fe07
Resolve wrong silk screen placement
...
Signed-off-by: zisi <agzisim@gmail.com>
2017-11-16 20:18:20 +02:00
03ce9b924c
Add GND pins in the input header
...
Signed-off-by: zisi <agzisim@gmail.com>
2017-11-15 23:43:02 +02:00
e5b612b5e6
Add ISP header
...
Signed-off-by: zisi <agzisim@gmail.com>
2017-11-15 11:21:15 +02:00
25b5b732a8
Add missing 3d models in PCB
...
Signed-off-by: zisi <agzisim@gmail.com>
2017-11-10 21:25:48 +02:00
f83eb972e1
Update BOM
...
Signed-off-by: zisi <agzisim@gmail.com>
2017-11-10 20:23:26 +02:00
9bd2b70b0f
Change fuse to 1206SFS200F/63-2
...
Signed-off-by: zisi <agzisim@gmail.com>
2017-11-10 20:17:37 +02:00
ee12752788
Update files after gitlab migration
...
Signed-off-by: zisi <agzisim@gmail.com>
2017-09-19 12:10:38 +03:00
69b1889944
Remove firmware (to separate repo) and cleanup of names
...
Signed-off-by: Pierros Papadeas <pierros@papadeas.gr>
2017-07-28 20:16:24 +03:00
c068197679
Rotator controller ( #27 )
...
* Update satnogs library.
Add new footprints, 3d shapes and schematic components.
* Updates in rotator controller.
Add RJ45 for communication and power in (PoE).
New dimensions of board (euroboard 100x80 mm)
Embed the power supply to the board (WIP).
Add pins for indicator LED and for rf switch (optional).
Add additional pads for power in case that PoE (RJ45) isn't suitable.
Updates in schematic and board wuth new library parts.
* Add PCA9540B schematic component, I2C multiplexer.
* Add fuse holder and stitching via.
* Updates in PCB and schematic.
Add digital and power ground planes (WIP).
Connection of separate GND with zero resistor.
Add I2C multiplexer.
Finalize power supply of 12V.
Change RJ45 to headers.
Add RC filter (LPF) for end-stops.
Add more dev-pins.
Add filter in uC voltage input.
Signed-off-by: zisi <agzisim@gmail.com>
* Add GND-GNDD vias and silkscreen.
Signed-off-by: zisi <agzisim@gmail.com>
* Updates according to Kicad library convention
Signed-off-by: zisi <agzisim@gmail.com>
* Resolve issues #22 , #23 , #24 , #25
Signed-off-by: zisi <agzisim@gmail.com>
* Fix silkscreen placement and zone cleanup
* Use one GND bottom plane and GND areas in front
Remove zero ohm resistors
To avoid connection with GNDD directly with motor GND use keep out area
Signed-off-by: zisi <agzisim@gmail.com>
* Add electrolytic capacitor, TVS-diode in PSU input
Capacitor reduces the voltage ripple of input voltage (long cable)
TVS-diode protect the PSU and all the board from surges and ESD events
Signed-off-by: zisi <agzisim@gmail.com>
2017-07-28 20:04:00 +03:00
d484c5249e
Merge pull request #26 from Highcooley/patch-1
...
Update stepper_motor_controller.ino
2017-02-14 12:48:20 +02:00
7765aa58ea
Update stepper_motor_controller.ino
...
HOME_EL is on Pin 3 with the current PCB
2017-02-06 22:56:16 +01:00
b07b90c226
Encoder case ( #19 )
...
* Update pcb to mount in cas.
Add mount holes.
Rearraange parts in order to place the AS5601 in the middle of PCB.
* Silksreen fixes.
2016-10-18 20:16:39 +03:00
4cb27043e0
Update BOM.
...
Add link for PCBs.
2016-04-16 14:31:07 +03:00
2f13bf09aa
Update pro-mini package and satnogs controller PCB.
2016-04-15 19:08:27 +03:00
e09e0c8c76
Update BOM's.
2016-04-09 03:53:49 +03:00
c5942bdbb9
Update TCST2103 part.
...
Change PTH to NPTH.
2016-04-09 00:43:51 +03:00
8120a43696
Fixes in DC motor firmware.
...
Changes in homing function.
Changes in get position function.
Add RS485 serial communication.
2016-04-08 17:10:38 +03:00
e0857abfdd
Update satnogs controller.
...
Replace arduino micro with arduino pro mini.
Fix wrong connection with RX-TX in SP485CN (RS485).
Better pin-header arrangement.
2016-04-08 17:00:12 +03:00
2cb4ccb000
Add reverse current protection to end-stop PCB.
2016-04-08 16:52:27 +03:00
debian