This function can return a negative number when it fails, but res->sets
is at most a u16 which can't hold that negative number. Let's store the
result into an int, ret, and then assign that to res->sets when it works
to avoid this logical impossibility.
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
After the first call to GetEventLog() on UEFI systems using the TCG2
crypto agile log format, any further log events (other than those
triggered by ExitBootServices()) will be logged in both the main log and
also in the Final Events Log. While the kernel only calls GetEventLog()
immediately before ExitBootServices(), we can't control whether earlier
parts of the boot process have done so. This will result in log entries
that exist in both logs, and so the current approach of simply appending
the Final Event Log to the main log will result in events being
duplicated.
We can avoid this problem by looking at the size of the Final Event Log
just before we call ExitBootServices() and exporting this to the main
kernel. The kernel can then skip over all events that occured before
ExitBootServices() and only append events that were not also logged to
the main log.
Signed-off-by: Matthew Garrett <mjg59@google.com>
Reported-by: Joe Richey <joerichey@google.com>
Suggested-by: Joe Richey <joerichey@google.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
We want to grab a pointer to the TPM final events table, so abstract out
the existing code for finding an FDT table and make it generic.
Signed-off-by: Matthew Garrett <mjg59@google.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Right now we only attempt to obtain the SHA1-only event log. The
protocol also supports a crypto agile log format, which contains digests
for all algorithms in use. Attempt to obtain this first, and fall back
to obtaining the older format if the system doesn't support it. This is
lightly complicated by the event sizes being variable (as we don't know
in advance which algorithms are in use), and the interface giving us
back a pointer to the start of the final entry rather than a pointer to
the end of the log - as a result, we need to parse the final entry to
figure out its length in order to know how much data to copy up to the
OS.
Signed-off-by: Matthew Garrett <mjg59@google.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Bartosz Szczepanek <bsz@semihalf.com>
Tested-by: Bartosz Szczepanek <bsz@semihalf.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
UEFI systems provide a boot services protocol for obtaining the TPM
event log, but this is unusable after ExitBootServices() is called.
Unfortunately ExitBootServices() itself triggers additional TPM events
that then can't be obtained using this protocol. The platform provides a
mechanism for the OS to obtain these events by recording them to a
separate UEFI configuration table which the OS can then map.
Unfortunately this table isn't self describing in terms of providing its
length, so we need to parse the events inside it to figure out how long
it is. Since the table isn't mapped at this point, we need to extend the
length calculation function to be able to map the event as it goes
along.
(Fixes by Bartosz Szczepanek <bsz@semihalf.com>)
Signed-off-by: Matthew Garrett <mjg59@google.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Bartosz Szczepanek <bsz@semihalf.com>
Tested-by: Bartosz Szczepanek <bsz@semihalf.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
There is an arbitrary difference between the prototypes of
bus_find_device() and class_find_device() preventing their callers
from passing the same pair of data and match() arguments to both of
them, which is the const qualifier used in the prototype of
class_find_device(). If that qualifier is also used in the
bus_find_device() prototype, it will be possible to pass the same
match() callback function to both bus_find_device() and
class_find_device(), which will allow some optimizations to be made in
order to avoid code duplication going forward. Also with that, constify
the "data" parameter as it is passed as a const to the match function.
For this reason, change the prototype of bus_find_device() to match
the prototype of class_find_device() and adjust its callers to use the
const qualifier in accordance with the new prototype of it.
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Andreas Noever <andreas.noever@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Corey Minyard <minyard@acm.org>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: David Kershner <david.kershner@unisys.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: David Airlie <airlied@linux.ie>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: Harald Freudenberger <freude@linux.ibm.com>
Cc: Hartmut Knaack <knaack.h@gmx.de>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michael Jamet <michael.jamet@intel.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Peter Oberparleiter <oberpar@linux.ibm.com>
Cc: Sebastian Ott <sebott@linux.ibm.com>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Yehezkel Bernat <YehezkelShB@gmail.com>
Cc: rafael@kernel.org
Acked-by: Corey Minyard <minyard@acm.org>
Acked-by: David Kershner <david.kershner@unisys.com>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Acked-by: Wolfram Sang <wsa@the-dreams.de> # for the I2C parts
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace the variable set function from "efivar_entry_set" to
"efivar_entry_set_safe" in efibc panic notifier.
In safe function parameter "block" will set to false
and will call "efivar_entry_set_nonblocking"to set efi variables.
efivar_entry_set_nonblocking is guaranteed to
not block and is suitable for calling from crash/panic handlers.
In UEFI android platform, when warm reset happens,
with this change, efibc will not block the reboot process.
Otherwise, set variable will call queue work and send to other offlined
cpus then cause another panic, finally will cause reboot failure.
Signed-off-by: Tian Baofeng <baofeng.tian@intel.com>
Signed-off-by: Luo XinanX <xinanx.luo@intel.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Another round of SPDX updates for 5.2-rc6
Here is what I am guessing is going to be the last "big" SPDX update for
5.2. It contains all of the remaining GPLv2 and GPLv2+ updates that
were "easy" to determine by pattern matching. The ones after this are
going to be a bit more difficult and the people on the spdx list will be
discussing them on a case-by-case basis now.
Another 5000+ files are fixed up, so our overall totals are:
Files checked: 64545
Files with SPDX: 45529
Compared to the 5.1 kernel which was:
Files checked: 63848
Files with SPDX: 22576
This is a huge improvement.
Also, we deleted another 20000 lines of boilerplate license crud, always
nice to see in a diffstat.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXQyQYA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymnGQCghETUBotn1p3hTjY56VEs6dGzpHMAnRT0m+lv
kbsjBGEJpLbMRB2krnaU
=RMcT
-----END PGP SIGNATURE-----
Merge tag 'spdx-5.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx
Pull still more SPDX updates from Greg KH:
"Another round of SPDX updates for 5.2-rc6
Here is what I am guessing is going to be the last "big" SPDX update
for 5.2. It contains all of the remaining GPLv2 and GPLv2+ updates
that were "easy" to determine by pattern matching. The ones after this
are going to be a bit more difficult and the people on the spdx list
will be discussing them on a case-by-case basis now.
Another 5000+ files are fixed up, so our overall totals are:
Files checked: 64545
Files with SPDX: 45529
Compared to the 5.1 kernel which was:
Files checked: 63848
Files with SPDX: 22576
This is a huge improvement.
Also, we deleted another 20000 lines of boilerplate license crud,
always nice to see in a diffstat"
* tag 'spdx-5.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx: (65 commits)
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 507
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 506
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 505
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 504
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 503
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 502
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 501
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 499
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 498
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 497
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 496
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 495
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 491
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 490
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 489
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 488
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 487
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 486
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 485
...
This patch corrects the SPDX License Identifier style
in header file related to Firmware Drivers for ARM SCMI
Message Protocol.
For C header files Documentation/process/license-rules.rst
mandates C-like comments (opposed to C source files where
C++ style should be used)
Changes made by using a script provided by Joe Perches here:
https://lkml.org/lkml/2019/2/7/46
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch corrects the SPDX License Identifier style
in header file related to Firmware Drivers for Texas
Instruments SCI Protocol.
For C header files Documentation/process/license-rules.rst
mandates C-like comments (opposed to C source files where
C++ style should be used)
Changes made by using a script provided by Joe Perches here:
https://lkml.org/lkml/2019/2/7/46
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
- Couple of fixes to handle resource ranges and
requesting response always from firmware;
- Add processor control
- Add support APIs for DMA
- Fix the SPDX license plate
- Unused varible warning fix
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=LAdf
-----END PGP SIGNATURE-----
Merge tag 'drivers_soc_for_5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into arm/drivers
SOC: TI SCI updates for v5.3
- Couple of fixes to handle resource ranges and
requesting response always from firmware;
- Add processor control
- Add support APIs for DMA
- Fix the SPDX license plate
- Unused varible warning fix
* tag 'drivers_soc_for_5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone:
firmware: ti_sci: Fix gcc unused-but-set-variable warning
firmware: ti_sci: Use the correct style for SPDX License Identifier
firmware: ti_sci: Parse all resource ranges even if some is not available
firmware: ti_sci: Add support for processor control
firmware: ti_sci: Add resource management APIs for ringacc, psi-l and udma
firmware: ti_sci: Always request response from firmware
Signed-off-by: Olof Johansson <olof@lixom.net>
Based on 2 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation #
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 4122 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
this file is part of the linux kernel and is made available under
the terms of the gnu general public license version 2
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 28 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.534229504@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/firmware/ti_sci.c: In function ti_sci_cmd_ring_config:
drivers/firmware/ti_sci.c:2035:17: warning: variable dev set but not used [-Wunused-but-set-variable]
drivers/firmware/ti_sci.c: In function ti_sci_cmd_ring_get_config:
drivers/firmware/ti_sci.c:2104:17: warning: variable dev set but not used [-Wunused-but-set-variable]
drivers/firmware/ti_sci.c: In function ti_sci_cmd_rm_udmap_tx_ch_cfg:
drivers/firmware/ti_sci.c:2287:17: warning: variable dev set but not used [-Wunused-but-set-variable]
drivers/firmware/ti_sci.c: In function ti_sci_cmd_rm_udmap_rx_ch_cfg:
drivers/firmware/ti_sci.c:2357:17: warning: variable dev set but not used [-Wunused-but-set-variable]
Use the 'dev' variable instead of info->dev to fix this.
Acked-by: Suman Anna <s-anna@ti.com>
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
This patch corrects the SPDX License Identifier style
in header file related to Firmware Drivers for Texas
Instruments SCI Protocol.
For C header files Documentation/process/license-rules.rst
mandates C-like comments (opposed to C source files where
C++ style should be used)
Changes made by using a script provided by Joe Perches here:
https://lkml.org/lkml/2019/2/7/46
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
The "+sec" extension is invalid for older ARM architectures, but
the code can now be built on any ARM configuration:
/tmp/trusted_foundations-2d0882.s: Assembler messages:
/tmp/trusted_foundations-2d0882.s:194: Error: architectural extension `sec' is not allowed for the current base architecture
/tmp/trusted_foundations-2d0882.s:201: Error: selected processor does not support `smc #0' in ARM mode
/tmp/trusted_foundations-2d0882.s:213: Error: architectural extension `sec' is not allowed for the current base architecture
/tmp/trusted_foundations-2d0882.s:220: Error: selected processor does not support `smc #0' in ARM mode
Add a dependency on ARMv7 for the build.
Fixes: 4cb5d9eca1 ("firmware: Move Trusted Foundations support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Olof Johansson <olof@lixom.net>
1. Correction to ARM document ID referred in SCMI protocol binding
2. Fix to correct bitfield definitions for SENSOR_DESC attributes which
otherwise will calculate sensor values on wrong scale
3. Adds the missing rate_discrete flag setting so that discrete clocks
are handled correctly. Without this fix it assumes continuous range
which is incorrect
4. Adds support to read and scale the sensor values based on the factor
read from the firmware
-----BEGIN PGP SIGNATURE-----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=RZCT
-----END PGP SIGNATURE-----
Merge tag 'scmi-updates-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/drivers
ARM SCMI updates/fixes for v5.3
1. Correction to ARM document ID referred in SCMI protocol binding
2. Fix to correct bitfield definitions for SENSOR_DESC attributes which
otherwise will calculate sensor values on wrong scale
3. Adds the missing rate_discrete flag setting so that discrete clocks
are handled correctly. Without this fix it assumes continuous range
which is incorrect
4. Adds support to read and scale the sensor values based on the factor
read from the firmware
* tag 'scmi-updates-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
hwmon: scmi: Scale values to target desired HWMON units
firmware: arm_scmi: fetch and store sensor scale
firmware: arm_scmi: update rate_discrete in clock_describe_rates_get
firmware: arm_scmi: fix bitfield definitions for SENSOR_DESC attributes
dt-bindings: arm: fix the document ID for SCMI protocol documentation
Signed-off-by: Olof Johansson <olof@lixom.net>
Since commit 85f1abe001 ("kthread, sched/wait: Fix kthread_parkme()
completion issue"), kthreads that are bound to a CPU must be parked
before being stopped. At the moment the PSCI checker calls
kthread_stop() directly on the suspend kthread, which triggers the
following warning:
[ 6.068288] WARNING: CPU: 1 PID: 1 at kernel/kthread.c:398 __kthread_bind_mask+0x20/0x78
...
[ 6.190151] Call trace:
[ 6.192566] __kthread_bind_mask+0x20/0x78
[ 6.196615] kthread_unpark+0x74/0x80
[ 6.200235] kthread_stop+0x44/0x1d8
[ 6.203769] psci_checker+0x3bc/0x484
[ 6.207389] do_one_initcall+0x48/0x260
[ 6.211180] kernel_init_freeable+0x2c8/0x368
[ 6.215488] kernel_init+0x10/0x100
[ 6.218935] ret_from_fork+0x10/0x1c
[ 6.222467] ---[ end trace e05e22863d043cd3 ]---
kthread_unpark() tries to bind the thread to its CPU and aborts with a
WARN() if the thread wasn't in TASK_PARKED state. Park the kthreads
before stopping them.
Fixes: 85f1abe001 ("kthread, sched/wait: Fix kthread_parkme() completion issue")
Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
- A build fix for soc-imx8 driver which needs SOC_BUS support. To
avoid dealing with the dependency for every single i.MX SoC bus
driver, we selects at from architecture level.
- A fix on i.MX SCU firmware driver to ensure SCU irq is enabled only
after IPC is ready.
- A regression fix on cpuidle-imx6sx driver, which causes some
characters loss on serial communication.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJc50FAAAoJEFBXWFqHsHzOt4wIAJJ4MLXCMKj2oVWXimkF3DAF
g9M7ridrarhPAXowuTYV4FuW7me7nPxr5VTmwVIJE23wEKdaOd7cg0tkmvMi0tG6
3TlNwCsEjJx+9rtGF196SZfR9HinLziAc4x7Qcl88xlQTQEIptvx6AMPit7Gy0je
MJ0PzLA1l+tazo7dXvMjZ+LkxlvLTSB/RuBciA8sgOvwsdbG1Azz/AduSLxO7e/T
ZSmEElTluqIKVxH5sbVY0T7mxWat7l5As28nx27cWDHGPoDMOt/TWiCTAvFR0d6T
m+bW6xcvy63Z2II1Er//ig4rwcmK1mcUv+3i63/sIkFxl9fa0H4WnTu67T+/mck=
=zbC7
-----END PGP SIGNATURE-----
Merge tag 'imx-fixes-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes
i.MX fixes for 5.2:
- A build fix for soc-imx8 driver which needs SOC_BUS support. To
avoid dealing with the dependency for every single i.MX SoC bus
driver, we selects at from architecture level.
- A fix on i.MX SCU firmware driver to ensure SCU irq is enabled only
after IPC is ready.
- A regression fix on cpuidle-imx6sx driver, which causes some
characters loss on serial communication.
* tag 'imx-fixes-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: imx: cpuidle-imx6sx: Restrict the SW2ISO increase to i.MX6SX
firmware: imx: SCU irq should ONLY be enabled after SCU IPC is ready
arm64: imx: Fix build error without CONFIG_SOC_BUS
Signed-off-by: Olof Johansson <olof@lixom.net>
The kbuild documentation clearly shows that the documents
there are written at different times: some use markdown,
some use their own peculiar logic to split sections.
Convert everything to ReST without affecting too much
the author's style and avoiding adding uneeded markups.
The conversion is actually:
- add blank lines and identation in order to identify paragraphs;
- fix tables markups;
- add some lists markups;
- mark literal blocks;
- adjust title markups.
At its new index.rst, let's add a :orphan: while this is not linked to
the main index.rst file, in order to avoid build warnings.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Do not fail if any of the requested subtypes are not availabe, but set the
number of resources to 0 and continue parsing the resource ranges.
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Texas Instrument's System Control Interface (TI-SCI) Message Protocol
is used in Texas Instrument's System on Chip (SoC) such as those
in K3 family AM654 SoC to communicate between various compute
processors with a central system controller entity.
The system controller provides various services including the control
of other compute processors within the SoC. Extend the TI-SCI protocol
support to add various TI-SCI commands to invoke services associated
with power and reset control, and boot vector management of the
various compute processors from the Linux kernel.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Configuration of NAVSS resource, like rings, UDMAP channels, flows
and PSI-L thread management need to be done via TISCI.
Add the needed structures and functions for NAVSS resource configuration of
the following:
Rings from Ring Accelerator
PSI-L thread management
UDMAP tchan, rchan and rflow configuration.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
TI-SCI firmware will only respond to messages when the
TI_SCI_FLAG_REQ_ACK_ON_PROCESSED flag is set. Most messages already do
this, set this for the ones that do not.
This will be enforced in future firmware that better match the TI-SCI
specifications, this patch will not break users of existing firmware.
Fixes: aa276781a6 ("firmware: Add basic support for TI System Control Interface (TI-SCI) protocol")
Signed-off-by: Andrew F. Davis <afd@ti.com>
Acked-by: Nishanth Menon <nm@ti.com>
Tested-by: Alejandro Hernandez <ajhernandez@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Future SoCs are going to have more than 255 device clocks in certain cases,
and thus the API must be extended to support this. The support is done in
backwards compatible extension, in which the new u32 clock identifier
fields are only used if the existing u8 size clock identifier is set as
255. In all the other cases, the existing u8 clock identifier is used. As
the size of the messages sent / received is not verified for existing
devices / old firmware, increasing the size of the messages from the end
is also fine. Due to this reason, depending on ABI version isn't necessary
either.
Acked-by: Santosh Shilimkar <ssantosh@kernel.org>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
In preparation for dealing with scales within the SCMI HWMON driver,
fetch and store the sensor unit scale into the scmi_sensor_info
structure. In order to simplify computations for upper layer, take care
of sign extending the scale to a full 8-bit signed value.
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
[sudeep.holla: update bitfield values as per specification]
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
The boolean rate_discrete needs to be assigned to clk->rate_discrete,
so that clock driver can distinguish between the continuous range and
discrete rates. It uses this in scmi_clk_round_rate could get the
rounded value if it's a continuous range.
Fixes: 5f6c6430e9 ("firmware: arm_scmi: add initial support for clock protocol")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
[sudeep.holla: updated commit message]
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
As per the SCMI specification the bitfields for SENSOR_DESC attributes
are as follows:
attributes_low [7:0] Number of trip points supported
attributes_high [15:11] The power-of-10 multiplier in 2's-complement
format that is applied to the sensor units
Looks like the code developed during the draft versions of the
specification slipped through and are wrong with respect to final
released version. Fix them by adjusting the bitfields appropriately.
Fixes: 5179c523c1 ("firmware: arm_scmi: add initial support for sensor protocol")
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Starting with ACPI 6.2 bits 1 and 2 of the BGRT status field are no longer
reserved. These bits are now used to indicate if the image needs to be
rotated before being displayed.
The first device using these bits has now shown up (the GPD MicroPC) and
the reserved bits check causes us to reject the valid BGRT table on this
device.
Rather then changing the reserved bits check, allowing only the 2 new bits,
instead just completely remove it so that we do not end up with a similar
problem when more bits are added in the future.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Ensure that the EFI memreserve entries can be accessed, even if they
are located in memory that the kernel (e.g., a crashkernel) omits from
the linear map.
Fixes: 80424b02d4 ("efi: Reduce the amount of memblock reservations ...")
Cc: <stable@vger.kernel.org> # 5.0+
Reported-by: Jonathan Richardson <jonathan.richardson@broadcom.com>
Reviewed-by: Jonathan Richardson <jonathan.richardson@broadcom.com>
Tested-by: Jonathan Richardson <jonathan.richardson@broadcom.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation you should have received a
copy of the gnu general public license along with this program if
not see http www gnu org licenses
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 30 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190531190115.962665879@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
this file is released under the gplv2
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 68 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Armijn Hemel <armijn@tjaldur.nl>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190531190114.292346262@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms and conditions of the gnu general public license
version 2 as published by the free software foundation this program
is distributed in the hope it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 263 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190529141901.208660670@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license v2 0 as
published by the free software foundation this program is
distributed in the hope that it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 23 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190529141901.115786599@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 and
only version 2 as published by the free software foundation this
program is distributed in the hope that it will be useful but
without any warranty without even the implied warranty of
merchantability or fitness for a particular purpose see the gnu
general public license for more details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 294 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190529141900.825281744@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 and
only version 2 as published by the free software foundation this
program is distributed in the hope that it will be useful but
without any warranty without even the implied warranty of
merchantability or fitness for a particular purpose see the gnu
general public license for more details you should have received a
copy of the gnu general public license along with this program if
not write to the free software foundation inc 51 franklin street
fifth floor boston ma 02110 1301 usa
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 94 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190529141334.043630402@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull EFI fixes from Ingo Molnar:
"Two EFI fixes: a quirk for weird systabs, plus add more robust error
handling in the old 1:1 mapping code"
* 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi: Allow the number of EFI configuration tables entries to be zero
efi/x86/Add missing error handling to old_memmap 1:1 mapping code
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms and conditions of the gnu general public license
version 2 as published by the free software foundation this program
is distributed in the hope it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details you should have received a copy of the gnu general
public license along with this program if not see http www gnu org
licenses
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 228 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Steve Winslow <swinslow@gmail.com>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190528171438.107155473@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
licensed under gplv2
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 99 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Steve Winslow <swinslow@gmail.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190528170027.163048684@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation this program is
distributed in the hope that it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 655 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070034.575739538@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 3 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version this program is distributed in the
hope that it will be useful but without any warranty without even
the implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version [author] [kishon] [vijay] [abraham]
[i] [kishon]@[ti] [com] this program is distributed in the hope that
it will be useful but without any warranty without even the implied
warranty of merchantability or fitness for a particular purpose see
the gnu general public license for more details
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version [author] [graeme] [gregory]
[gg]@[slimlogic] [co] [uk] [author] [kishon] [vijay] [abraham] [i]
[kishon]@[ti] [com] [based] [on] [twl6030]_[usb] [c] [author] [hema]
[hk] [hemahk]@[ti] [com] this program is distributed in the hope
that it will be useful but without any warranty without even the
implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 1105 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070033.202006027@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 3029 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Only try and access the EFI configuration tables if there there are any
reported. This allows EFI to be continued to used on systems where there
are no configuration table entries.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Gen Zhang <blackgod016574@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20190525112559.7917-3-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
These headers aren't used by the files they're included in, so drop
them. The memconsole file uses memremap() though, so include io.h there
so that the include is explicit.
Cc: Wei-Ning Huang <wnhuang@chromium.org>
Cc: Julius Werner <jwerner@chromium.org>
Cc: Brian Norris <briannorris@chromium.org>
Cc: Samuel Holland <samuel@sholland.org>
Cc: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We can store this function pointer directly in the bin_attribute
structure's private field. Do this to save one global pointer.
Cc: Wei-Ning Huang <wnhuang@chromium.org>
Cc: Julius Werner <jwerner@chromium.org>
Cc: Brian Norris <briannorris@chromium.org>
Cc: Samuel Holland <samuel@sholland.org>
Cc: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
memremap() doesn't return __iomem marked memory, so drop the marking
here. This makes static analysis tools like sparse happy again.
Cc: Wei-Ning Huang <wnhuang@chromium.org>
Cc: Julius Werner <jwerner@chromium.org>
Cc: Brian Norris <briannorris@chromium.org>
Cc: Samuel Holland <samuel@sholland.org>
Cc: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the devm version of memremap so that we can delete the unmapping
code in driver remove, but more importantly so that we can unmap this
memory region if memconsole_sysfs_init() errors out for some reason.
Cc: Wei-Ning Huang <wnhuang@chromium.org>
Cc: Julius Werner <jwerner@chromium.org>
Cc: Brian Norris <briannorris@chromium.org>
Cc: Samuel Holland <samuel@sholland.org>
Cc: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove some boiler plate code we have in three drivers with a single
line each time. This also gets us a free assignment of the driver .owner
field, making these drivers work better as modules.
Cc: Wei-Ning Huang <wnhuang@chromium.org>
Cc: Julius Werner <jwerner@chromium.org>
Cc: Brian Norris <briannorris@chromium.org>
Cc: Samuel Holland <samuel@sholland.org>
Cc: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add SPDX license identifiers to all Make/Kconfig files which:
- Have no license information of any form
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add SPDX license identifiers to all files which:
- Have no license information of any form
- Have MODULE_LICENCE("GPL*") inside which was used in the initial
scan/conversion to ignore the file
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add SPDX license identifiers to all files which:
- Have no license information of any form
- Have EXPORT_.*_SYMBOL_GPL inside which was used in the
initial scan/conversion to ignore the file
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull IRQ chip updates from Ingo Molnar:
"A late irqchips update:
- New TI INTR/INTA set of drivers
- Rewrite of the stm32mp1-exti driver as a platform driver
- Update the IOMMU MSI mapping API to be RT friendly
- A number of cleanups and other low impact fixes"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (34 commits)
iommu/dma-iommu: Remove iommu_dma_map_msi_msg()
irqchip/gic-v3-mbi: Don't map the MSI page in mbi_compose_m{b, s}i_msg()
irqchip/ls-scfg-msi: Don't map the MSI page in ls_scfg_msi_compose_msg()
irqchip/gic-v3-its: Don't map the MSI page in its_irq_compose_msi_msg()
irqchip/gicv2m: Don't map the MSI page in gicv2m_compose_msi_msg()
iommu/dma-iommu: Split iommu_dma_map_msi_msg() in two parts
genirq/msi: Add a new field in msi_desc to store an IOMMU cookie
arm64: arch_k3: Enable interrupt controller drivers
irqchip/ti-sci-inta: Add msi domain support
soc: ti: Add MSI domain bus support for Interrupt Aggregator
irqchip/ti-sci-inta: Add support for Interrupt Aggregator driver
dt-bindings: irqchip: Introduce TISCI Interrupt Aggregator bindings
irqchip/ti-sci-intr: Add support for Interrupt Router driver
dt-bindings: irqchip: Introduce TISCI Interrupt router bindings
gpio: thunderx: Use the default parent apis for {request,release}_resources
genirq: Introduce irq_chip_{request,release}_resource_parent() apis
firmware: ti_sci: Add helper apis to manage resources
firmware: ti_sci: Add RM mapping table for am654
firmware: ti_sci: Add support for IRQ management
firmware: ti_sci: Add support for RM core ops
...
Various driver updates for platforms and a couple of the small driver
subsystems we merge through our tree:
Among the larger pieces:
- Power management improvements for TI am335x and am437x (RTC suspend/wake)
- Misc new additions for Amlogic (socinfo updates)
- ZynqMP FPGA manager
- Nvidia improvements for reset/powergate handling
- PMIC wrapper for Mediatek MT8516
- Misc fixes/improvements for ARM SCMI, TEE, NXP i.MX SCU drivers
-----BEGIN PGP SIGNATURE-----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=YSfu
-----END PGP SIGNATURE-----
Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC-related driver updates from Olof Johansson:
"Various driver updates for platforms and a couple of the small driver
subsystems we merge through our tree:
Among the larger pieces:
- Power management improvements for TI am335x and am437x (RTC
suspend/wake)
- Misc new additions for Amlogic (socinfo updates)
- ZynqMP FPGA manager
- Nvidia improvements for reset/powergate handling
- PMIC wrapper for Mediatek MT8516
- Misc fixes/improvements for ARM SCMI, TEE, NXP i.MX SCU drivers"
* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (57 commits)
soc: aspeed: fix Kconfig
soc: add aspeed folder and misc drivers
spi: zynqmp: Fix build break
soc: imx: Add generic i.MX8 SoC driver
MAINTAINERS: Update email for Qualcomm SoC maintainer
memory: tegra: Fix a typos for "fdcdwr2" mc client
Revert "ARM: tegra: Restore memory arbitration on resume from LP1 on Tegra30+"
memory: tegra: Replace readl-writel with mc_readl-mc_writel
memory: tegra: Fix integer overflow on tick value calculation
memory: tegra: Fix missed registers values latching
ARM: tegra: cpuidle: Handle tick broadcasting within cpuidle core on Tegra20/30
optee: allow to work without static shared memory
soc/tegra: pmc: Move powergate initialisation to probe
soc/tegra: pmc: Remove reset sysfs entries on error
soc/tegra: pmc: Fix reset sources and levels
soc: amlogic: meson-gx-pwrc-vpu: Add support for G12A
soc: amlogic: meson-gx-pwrc-vpu: Fix power on/off register bitmask
fpga manager: Adding FPGA Manager support for Xilinx zynqmp
dt-bindings: fpga: Add bindings for ZynqMP fpga driver
firmware: xilinx: Add fpga API's
...
SoC updates, mostly refactorings and cleanups of old legacy platforms.
Major themes this release:
- Conversion of ixp4xx to a modern platform (drivers, DT, bindings)
- Moving some of the ep93xx headers around to get it closer to multiplatform enabled.
- Cleanups of Davinci
This tag also contains a few patches that were queued up as fixes before
5.1 but I didn't get sent in before release.
-----BEGIN PGP SIGNATURE-----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=pUeO
-----END PGP SIGNATURE-----
Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC platform updates from Olof Johansson:
"SoC updates, mostly refactorings and cleanups of old legacy platforms.
Major themes this release:
- Conversion of ixp4xx to a modern platform (drivers, DT, bindings)
- Moving some of the ep93xx headers around to get it closer to
multiplatform enabled.
- Cleanups of Davinci
This also contains a few patches that were queued up as fixes before
5.1 but I didn't get sent in before release"
* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (123 commits)
ARM: debug-ll: add default address for digicolor
ARM: u300: regulator: add MODULE_LICENSE()
ARM: ep93xx: move private headers out of mach/*
ARM: ep93xx: move pinctrl interfaces into include/linux/soc
ARM: ep93xx: keypad: stop using mach/platform.h
ARM: ep93xx: move network platform data to separate header
ARM: stm32: add AMBA support for stm32 family
MAINTAINERS: update arch/arm/mach-davinci
ARM: rockchip: add missing of_node_put in rockchip_smp_prepare_pmu
ARM: dts: Add queue manager and NPE to the IXP4xx DTSI
soc: ixp4xx: qmgr: Add DT probe code
soc: ixp4xx: qmgr: Add DT bindings for IXP4xx qmgr
soc: ixp4xx: npe: Add DT probe code
soc: ixp4xx: Add DT bindings for IXP4xx NPE
soc: ixp4xx: qmgr: Pass resources
soc: ixp4xx: Remove unused functions
soc: ixp4xx: Uninline several functions
soc: ixp4xx: npe: Pass addresses as resources
ARM: ixp4xx: Turn the QMGR into a platform device
ARM: ixp4xx: Turn the NPE into a platform device
...
Here is the "real" big set of char/misc driver patches for 5.2-rc1
Loads of different driver subsystem stuff in here, all over the places:
- thunderbolt driver updates
- habanalabs driver updates
- nvmem driver updates
- extcon driver updates
- intel_th driver updates
- mei driver updates
- coresight driver updates
- soundwire driver cleanups and updates
- fastrpc driver updates
- other minor driver updates
- chardev minor fixups
Feels like this tree is getting to be a dumping ground of "small driver
subsystems" these days. Which is fine with me, if it makes things
easier for those subsystem maintainers.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iGwEABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXNHE2w8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykvyQCYj5vSHQ88yEU+bzwGzQQLOBWYIwCgm5Iku0Y3
f6V3MvRffg4qUp3cGbU=
=R37j
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.2-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc update part 2 from Greg KH:
"Here is the "real" big set of char/misc driver patches for 5.2-rc1
Loads of different driver subsystem stuff in here, all over the places:
- thunderbolt driver updates
- habanalabs driver updates
- nvmem driver updates
- extcon driver updates
- intel_th driver updates
- mei driver updates
- coresight driver updates
- soundwire driver cleanups and updates
- fastrpc driver updates
- other minor driver updates
- chardev minor fixups
Feels like this tree is getting to be a dumping ground of "small
driver subsystems" these days. Which is fine with me, if it makes
things easier for those subsystem maintainers.
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-5.2-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (255 commits)
intel_th: msu: Add current window tracking
intel_th: msu: Add a sysfs attribute to trigger window switch
intel_th: msu: Correct the block wrap detection
intel_th: Add switch triggering support
intel_th: gth: Factor out trace start/stop
intel_th: msu: Factor out pipeline draining
intel_th: msu: Switch over to scatterlist
intel_th: msu: Replace open-coded list_{first,last,next}_entry variants
intel_th: Only report useful IRQs to subdevices
intel_th: msu: Start handling IRQs
intel_th: pci: Use MSI interrupt signalling
intel_th: Communicate IRQ via resource
intel_th: Add "rtit" source device
intel_th: Skip subdevices if their MMIO is missing
intel_th: Rework resource passing between glue layers and core
intel_th: SPDX-ify the documentation
intel_th: msu: Fix single mode with IOMMU
coresight: funnel: Support static funnel
dt-bindings: arm: coresight: Unify funnel DT binding
coresight: replicator: Add new device id for static replicator
...
- Fix the handling of Performance and Energy Bias Hint (EPB) on
Intel processors and expose it to user space via sysfs to avoid
having to access it through the generic MSR I/F (Rafael Wysocki).
- Improve the handling of global turbo changes made by the platform
firmware in the intel_pstate driver (Rafael Wysocki).
- Convert some slow-path static_cpu_has() callers to boot_cpu_has()
in cpufreq (Borislav Petkov).
- Fix the frequency calculation loop in the armada-37xx cpufreq
driver (Gregory CLEMENT).
- Fix possible object reference leaks in multuple cpufreq drivers
(Wen Yang).
- Fix kerneldoc comment in the centrino cpufreq driver (dongjian).
- Clean up the ACPI and maple cpufreq drivers (Viresh Kumar, Mohan
Kumar).
- Add support for lx2160a and ls1028a to the qoriq cpufreq driver
(Vabhav Sharma, Yuantian Tang).
- Fix kobject memory leak in the cpufreq core (Viresh Kumar).
- Simplify the IOwait boosting in the schedutil cpufreq governor
and rework the TSC cpufreq notifier on x86 (Rafael Wysocki).
- Clean up the cpufreq core and statistics code (Yue Hu, Kyle Lin).
- Improve the cpufreq documentation, add SPDX license tags to
some PM documentation files and unify copyright notices in
them (Rafael Wysocki).
- Add support for "CPU" domains to the generic power domains (genpd)
framework and provide low-level PSCI firmware support for that
feature (Ulf Hansson).
- Rearrange the PSCI firmware support code and add support for
SYSTEM_RESET2 to it (Ulf Hansson, Sudeep Holla).
- Improve genpd support for devices in multiple power domains (Ulf
Hansson).
- Unify target residency for the AFTR and coupled AFTR states in the
exynos cpuidle driver (Marek Szyprowski).
- Introduce new helper routine in the operating performance points
(OPP) framework (Andrew-sh.Cheng).
- Add support for passing on-die termination (ODT) and auto power
down parameters from the kernel to Trusted Firmware-A (TF-A) to
the rk3399_dmc devfreq driver (Enric Balletbo i Serra).
- Add tracing to devfreq (Lukasz Luba).
- Make the exynos-bus devfreq driver suspend all devices on system
shutdown (Marek Szyprowski).
- Fix a few minor issues in the devfreq subsystem and clean it up
somewhat (Enric Balletbo i Serra, MyungJoo Ham, Rob Herring,
Saravana Kannan, Yangtao Li).
- Improve system wakeup diagnostics (Stephen Boyd).
- Rework filesystem sync messages emitted during system suspend and
hibernation (Harry Pan).
-----BEGIN PGP SIGNATURE-----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=nY9p
-----END PGP SIGNATURE-----
Merge tag 'pm-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These fix the (Intel-specific) Performance and Energy Bias Hint (EPB)
handling and expose it to user space via sysfs, fix and clean up
several cpufreq drivers, add support for two new chips to the qoriq
cpufreq driver, fix, simplify and clean up the cpufreq core and the
schedutil governor, add support for "CPU" domains to the generic power
domains (genpd) framework and provide low-level PSCI firmware support
for that feature, fix the exynos cpuidle driver and fix a couple of
issues in the devfreq subsystem and clean it up.
Specifics:
- Fix the handling of Performance and Energy Bias Hint (EPB) on Intel
processors and expose it to user space via sysfs to avoid having to
access it through the generic MSR I/F (Rafael Wysocki).
- Improve the handling of global turbo changes made by the platform
firmware in the intel_pstate driver (Rafael Wysocki).
- Convert some slow-path static_cpu_has() callers to boot_cpu_has()
in cpufreq (Borislav Petkov).
- Fix the frequency calculation loop in the armada-37xx cpufreq
driver (Gregory CLEMENT).
- Fix possible object reference leaks in multuple cpufreq drivers
(Wen Yang).
- Fix kerneldoc comment in the centrino cpufreq driver (dongjian).
- Clean up the ACPI and maple cpufreq drivers (Viresh Kumar, Mohan
Kumar).
- Add support for lx2160a and ls1028a to the qoriq cpufreq driver
(Vabhav Sharma, Yuantian Tang).
- Fix kobject memory leak in the cpufreq core (Viresh Kumar).
- Simplify the IOwait boosting in the schedutil cpufreq governor and
rework the TSC cpufreq notifier on x86 (Rafael Wysocki).
- Clean up the cpufreq core and statistics code (Yue Hu, Kyle Lin).
- Improve the cpufreq documentation, add SPDX license tags to some PM
documentation files and unify copyright notices in them (Rafael
Wysocki).
- Add support for "CPU" domains to the generic power domains (genpd)
framework and provide low-level PSCI firmware support for that
feature (Ulf Hansson).
- Rearrange the PSCI firmware support code and add support for
SYSTEM_RESET2 to it (Ulf Hansson, Sudeep Holla).
- Improve genpd support for devices in multiple power domains (Ulf
Hansson).
- Unify target residency for the AFTR and coupled AFTR states in the
exynos cpuidle driver (Marek Szyprowski).
- Introduce new helper routine in the operating performance points
(OPP) framework (Andrew-sh.Cheng).
- Add support for passing on-die termination (ODT) and auto power
down parameters from the kernel to Trusted Firmware-A (TF-A) to the
rk3399_dmc devfreq driver (Enric Balletbo i Serra).
- Add tracing to devfreq (Lukasz Luba).
- Make the exynos-bus devfreq driver suspend all devices on system
shutdown (Marek Szyprowski).
- Fix a few minor issues in the devfreq subsystem and clean it up
somewhat (Enric Balletbo i Serra, MyungJoo Ham, Rob Herring,
Saravana Kannan, Yangtao Li).
- Improve system wakeup diagnostics (Stephen Boyd).
- Rework filesystem sync messages emitted during system suspend and
hibernation (Harry Pan)"
* tag 'pm-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (72 commits)
cpufreq: Fix kobject memleak
cpufreq: armada-37xx: fix frequency calculation for opp
cpufreq: centrino: Fix centrino_setpolicy() kerneldoc comment
cpufreq: qoriq: add support for lx2160a
x86: tsc: Rework time_cpufreq_notifier()
PM / Domains: Allow to attach a CPU via genpd_dev_pm_attach_by_id|name()
PM / Domains: Search for the CPU device outside the genpd lock
PM / Domains: Drop unused in-parameter to some genpd functions
PM / Domains: Use the base device for driver_deferred_probe_check_state()
cpufreq: qoriq: Add ls1028a chip support
PM / Domains: Enable genpd_dev_pm_attach_by_id|name() for single PM domain
PM / Domains: Allow OF lookup for multi PM domain case from ->attach_dev()
PM / Domains: Don't kfree() the virtual device in the error path
cpufreq: Move ->get callback check outside of __cpufreq_get()
PM / Domains: remove unnecessary unlikely()
cpufreq: Remove needless bios_limit check in show_bios_limit()
drivers/cpufreq/acpi-cpufreq.c: This fixes the following checkpatch warning
firmware/psci: add support for SYSTEM_RESET2
PM / devfreq: add tracing for scheduling work
trace: events: add devfreq trace event file
...
- Convert the ACPI documentation in the kernel source tree to the
.rst format and split it into the admin guide, driver API and
firmware guide parts (Changbin Du).
- Add a PRP0001 usage example to the ACPI documentation (Thomas
Preston).
- Switch over the users of the acpi_dev_get_first_match_name()
library function which turned out to be problematic to a new,
better one called acpi_dev_get_first_match_dev() (Andy Shevchenko,
YueHaibing).
- Update the ACPICA code in the kernel to upstream release 20190405
including:
* Null pointer dereference check in acpi_ns_delete_node() (Erik
Schmauss).
* Multiple macro and function name changes (Bob Moore).
* Predefined operation region name fix (Erik Schmauss).
- Fix hibernation issue on systems using the Baytrail and
Cherrytrail Intel SoCs introduced during the 4.20 development
cycle (Hans de Goede).
- Add Sony VPCEH3U1E to the backlight quirk list (Zhang Rui).
- Fix button handling during system resume (Zhang Rui).
- Add a device PM diagnostic message (Rafael Wysocki).
- Clean up the code, comments and white space in multiple places
(Bjorn Helgaas, Gustavo Silva, Kefeng Wang).
-----BEGIN PGP SIGNATURE-----
iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAlzQEdcSHHJqd0Byand5
c29ja2kubmV0AAoJEILEb/54YlRxVKEP/ijfyNbe2s21nZXdEmL2mEFlkK3jvN/P
d9jDkM9u3iJzFHTjwbMrYa7uXQpLtlhsE3QrcRcfkumOf8XWH1kSY1pDfb3W701w
3Zy1zJyiH4SA5xwipDgiqLsHneV3NqtyYHjWh0u52zM8S5aL58ZPlgxwY/qywt94
CMCfs+QCR+MKHvJVjo8EjlF3pwOgZpIFpIHtzo5A87yzwnG3kWls0UVfJGHSAKsX
q+m3RhglqeVYVabXU/d5B9PnZiN5SmZdI864D2a5Dh4D/puv+k9hhBdCaMMi2F25
GZwFsBh3ymbcPCfaKe422488ERh1l8Ov1JsLUbFRcYw8euFXkaoOYtugETIy2XR9
3JNWu3TiuBhA4EkQdpiWY+CIcUmXDUzmEDhJBG1e6hhzlqZknIcfXVp6qu3bxoA/
OvlC3Lcaw9cHXQLGRk5S3u3F/NzdkSTD1A5bNSdHpbRqj1Ale8H8R9TUfqMX5Nsj
r4V5m+2bFsArOdVEit9kUw0MdFq/ew6eO75lBK8sUJLfQ2utiMZW8FuJBeNWRahE
bTsfOtxazDl0mcavROfzf4XFaBBQ0YUJvPIgVFhUPGOhlq96OAFgZYYemq7NOpQo
EvS8OQD0+k7hFg1/z+JUr8rDa1NRlLypz4iXa/wIU1a/sE0Odv4xwTH1XLhoaQKv
nVkGW4GD0WMX
=LtlV
-----END PGP SIGNATURE-----
Merge tag 'acpi-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These rearrange the ACPI documentation by converting it to the .rst
format and splitting it into clear categories (admin guide, driver
API, firmware guide), switch over multiple users of a problematic
library function to a new better one, update the ACPICA code in the
kernel to a new upstream release, fix a few issues, improve power
device management diagnostics and do some cleanups.
Specifics:
- Convert the ACPI documentation in the kernel source tree to the
.rst format and split it into the admin guide, driver API and
firmware guide parts (Changbin Du).
- Add a PRP0001 usage example to the ACPI documentation (Thomas
Preston).
- Switch over the users of the acpi_dev_get_first_match_name()
library function which turned out to be problematic to a new,
better one called acpi_dev_get_first_match_dev() (Andy Shevchenko,
YueHaibing).
- Update the ACPICA code in the kernel to upstream release 20190405
including:
* Null pointer dereference check in acpi_ns_delete_node() (Erik
Schmauss).
* Multiple macro and function name changes (Bob Moore).
* Predefined operation region name fix (Erik Schmauss).
- Fix hibernation issue on systems using the Baytrail and Cherrytrail
Intel SoCs introduced during the 4.20 development cycle (Hans de
Goede).
- Add Sony VPCEH3U1E to the backlight quirk list (Zhang Rui).
- Fix button handling during system resume (Zhang Rui).
- Add a device PM diagnostic message (Rafael Wysocki).
- Clean up the code, comments and white space in multiple places
(Bjorn Helgaas, Gustavo Silva, Kefeng Wang)"
* tag 'acpi-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (53 commits)
Documentation: ACPI: move video_extension.txt to firmware-guide/acpi and convert to reST
Documentation: ACPI: move ssdt-overlays.txt to admin-guide/acpi and convert to reST
Documentation: ACPI: move lpit.txt to firmware-guide/acpi and convert to reST
Documentation: ACPI: move cppc_sysfs.txt to admin-guide/acpi and convert to reST
Documentation: ACPI: move apei/einj.txt to firmware-guide/acpi and convert to reST
Documentation: ACPI: move apei/output_format.txt to firmware-guide/acpi and convert to reST
Documentation: ACPI: move aml-debugger.txt to firmware-guide/acpi and convert to reST
Documentation: ACPI: move method-tracing.txt to firmware-guide/acpi and convert to rsST
Documentation: ACPI: move debug.txt to firmware-guide/acpi and convert to reST
Documentation: ACPI: move dsd/data-node-references.txt to firmware-guide/acpi and convert to reST
Documentation: ACPI: move dsd/graph.txt to firmware-guide/acpi and convert to reST
Documentation: ACPI: move acpi-lid.txt to firmware-guide/acpi and convert to reST
Documentation: ACPI: move i2c-muxes.txt to firmware-guide/acpi and convert to reST
Documentation: ACPI: move dsdt-override.txt to admin-guide/acpi and convert to reST
Documentation: ACPI: move initrd_table_override.txt to admin-guide/acpi and convert to reST
Documentation: ACPI: move method-customizing.txt to firmware-guide/acpi and convert to reST
Documentation: ACPI: move gpio-properties.txt to firmware-guide/acpi and convert to reST
Documentation: ACPI: move DSD-properties-rules.txt to firmware-guide/acpi and covert to reST
Documentation: ACPI: move scan_handlers.txt to driver-api/acpi and convert to reST
Documentation: ACPI: move linuxized-acpica.txt to driver-api/acpi and convert to reST
...
Mostly just incremental improvements here:
- Introduce AT_HWCAP2 for advertising CPU features to userspace
- Expose SVE2 availability to userspace
- Support for "data cache clean to point of deep persistence" (DC PODP)
- Honour "mitigations=off" on the cmdline and advertise status via sysfs
- CPU timer erratum workaround (Neoverse-N1 #1188873)
- Introduce perf PMU driver for the SMMUv3 performance counters
- Add config option to disable the kuser helpers page for AArch32 tasks
- Futex modifications to ensure liveness under contention
- Rework debug exception handling to seperate kernel and user handlers
- Non-critical fixes and cleanup
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAlzMFGgACgkQt6xw3ITB
YzTicAf/TX1h1+ecbx4WJAa4qeiOCPoNpG9efldQumqJhKL44MR5bkhuShna5mwE
ptm5qUXkZCxLTjzssZKnbdbgwa3t+emW8Of3D91IfI9akiZbMoDx5FGgcNbqjazb
RLrhOFHwgontA38yppZN+DrL+sXbvif/CVELdHahkEx6KepSGaS2lmPXRmz/W56v
4yIRy/zxc3Dhjgfm3wKh72nBwoZdLiIc4mchd5pthNlR9E2idrYkQegG1C+gA00r
o8uZRVOWgoh7H+QJE+xLUc8PaNCg8xqRRXOuZYg9GOz6hh7zSWhm+f1nRz9S2tIR
gIgsCHNqoO2I3E1uJpAQXDGtt2kFhA==
=ulpJ
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"Mostly just incremental improvements here:
- Introduce AT_HWCAP2 for advertising CPU features to userspace
- Expose SVE2 availability to userspace
- Support for "data cache clean to point of deep persistence" (DC PODP)
- Honour "mitigations=off" on the cmdline and advertise status via
sysfs
- CPU timer erratum workaround (Neoverse-N1 #1188873)
- Introduce perf PMU driver for the SMMUv3 performance counters
- Add config option to disable the kuser helpers page for AArch32 tasks
- Futex modifications to ensure liveness under contention
- Rework debug exception handling to seperate kernel and user
handlers
- Non-critical fixes and cleanup"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (92 commits)
Documentation: Add ARM64 to kernel-parameters.rst
arm64/speculation: Support 'mitigations=' cmdline option
arm64: ssbs: Don't treat CPUs with SSBS as unaffected by SSB
arm64: enable generic CPU vulnerabilites support
arm64: add sysfs vulnerability show for speculative store bypass
arm64: Fix size of __early_cpu_boot_status
clocksource/arm_arch_timer: Use arch_timer_read_counter to access stable counters
clocksource/arm_arch_timer: Remove use of workaround static key
clocksource/arm_arch_timer: Drop use of static key in arch_timer_reg_read_stable
clocksource/arm_arch_timer: Direcly assign set_next_event workaround
arm64: Use arch_timer_read_counter instead of arch_counter_get_cntvct
watchdog/sbsa: Use arch_timer_read_counter instead of arch_counter_get_cntvct
ARM: vdso: Remove dependency with the arch_timer driver internals
arm64: Apply ARM64_ERRATUM_1188873 to Neoverse-N1
arm64: Add part number for Neoverse N1
arm64: Make ARM64_ERRATUM_1188873 depend on COMPAT
arm64: Restrict ARM64_ERRATUM_1188873 mitigation to AArch32
arm64: mm: Remove pte_unmap_nested()
arm64: Fix compiler warning from pte_unmap() with -Wunused-but-set-variable
arm64: compat: Reduce address limit for 64K pages
...
Each resource with in the device can be uniquely identified as defined
by TISCI. Since this is generic across the devices, resource allocation
also can be made generic instead of each client driver handling the
resource. So add helper apis to manage the resource.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Acked-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Add the resource mapping table for AM654 SoC as defined in
http://downloads.ti.com/tisci/esd/latest/5_soc_doc/am6x/resasg_types.html
Introduce a new compatible for AM654 "ti,am654-sci" for using
this resource map table.
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Acked-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
TISCI abstracts the handling of IRQ routes where interrupt sources
are not directly connected to host interrupt controller. Add support
for the set of TISCI commands for requesting and releasing IRQs.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Acked-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
TISCI provides support for getting the resources(IRQ, RING etc..)
assigned to a specific device. These resources can be handled by
the client and in turn sends TISCI cmd to configure the resources.
It is very important that client should keep track on usage of these
resources.
Add support for TISCI commands to get resource ranges.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
TISCI has been updated to have support for Resource management(like
interrupts etc..). And there can be multiple device instances of a
resource type in a SoC. So every driver corresponding to a resource type
should get a TISCI handle so that it can make TISCI calls. And each
DT node corresponding to a device should exist under its corresponding
bus node as per the SoC architecture.
But existing apis in TISCI library assumes that all TISCI users are
child nodes of TISCI. Which is not true in the above case. So introduce
(devm_)ti_sci_get_by_phandle() apis that can be used by TISCI users
to get TISCI handle using of phandle property.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Acked-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
- A series from Aisheng to generalize the SCU powerdomain driver
for easier adding new SCU based platforms like imx8qm.
- Add a generic i.MX8 SoC driver for reporting SoC and platform
information.
- Replace explicit polling loop with a call to regmap_read_poll_timeout()
for gpcv2 driver to avoid code repetition.
- Use devm_platform_ioremap_resource() to simplify gpc/gpcv2 driver
code a bit.
- Add general IRQ support for imx-scu driver, so that interrupt of
device like RTC, thermal and watchdog can be handled.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJcvWKIAAoJEFBXWFqHsHzOeCQH/j/lgujJU9RnyY2CFTelMyad
uTKEUgk2vvbswBdFMaS7xAvbni24GOxUdKUYJul0oz5jBnK4wKmf6VY7TYMQ8Qht
hsdp0dsHHgI1qysOiOSxidhIN/2aXFl/hSoF8FT/9m0qXqnmvoHGFQT0YoMGwznS
+7tHuUt5cjUG/r5DMM6GOzI/w6K1of6RGGsLWvYeuy7OeoDhI2Gl5gtK+qxik98J
qC9UM64jO93rmXebJuG+9ZNJ0FFATrBMboMB3a7rA3t9RvkAFKEuVRp3USPuj1ek
TxNusTtkQwCeujy9QZu/eB/oUrScEbzJuw+sp0l69C9T2D44ucZLFbHixnwbigM=
=1wlN
-----END PGP SIGNATURE-----
Merge tag 'imx-drivers-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/drivers
i.MX drivers change for 5.2:
- A series from Aisheng to generalize the SCU powerdomain driver
for easier adding new SCU based platforms like imx8qm.
- Add a generic i.MX8 SoC driver for reporting SoC and platform
information.
- Replace explicit polling loop with a call to regmap_read_poll_timeout()
for gpcv2 driver to avoid code repetition.
- Use devm_platform_ioremap_resource() to simplify gpc/gpcv2 driver
code a bit.
- Add general IRQ support for imx-scu driver, so that interrupt of
device like RTC, thermal and watchdog can be handled.
* tag 'imx-drivers-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
soc: imx: Add generic i.MX8 SoC driver
firmware: imx: enable imx scu general irq function
soc: imx: gpcv2: use devm_platform_ioremap_resource() to simplify code
soc: imx: gpc: use devm_platform_ioremap_resource() to simplify code
firmware: imx: scu-pd: decouple the SS information from domain names
firmware: imx: scu-pd: add specifying the base of domain name index support
firmware: imx: scu-pd: use bool to set postfix
soc: imx: gpcv2: Make use of regmap_read_poll_timeout()
Signed-off-by: Olof Johansson <olof@lixom.net>
Functions called in '_sdei_handler' are needed to be marked as
'nokprobe'. Because these functions are called in NMI context and
neither the arch-code's debug infrastructure nor kprobes core supports
this.
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Reviewed-by: James Morse <james.morse@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
1. Fix for of_node reference leak in scmi_mailbox_check by passing
NULL argument to of_parse_phandle_with_args instead of dummy argument
2. Cleanup of_match_device->data NULL pointer handling using
of_device_get_match_data() helper
-----BEGIN PGP SIGNATURE-----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=j75N
-----END PGP SIGNATURE-----
Merge tag 'scmi-fixes-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/drivers
ARM SCMI fixes/cleanup for v5.2
1. Fix for of_node reference leak in scmi_mailbox_check by passing
NULL argument to of_parse_phandle_with_args instead of dummy argument
2. Cleanup of_match_device->data NULL pointer handling using
of_device_get_match_data() helper
* tag 'scmi-fixes-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_scmi: replace of_match_device->data with of_device_get_match_data()
firmware: arm_scmi: fix of_node leak in scmi_mailbox_check
Signed-off-by: Olof Johansson <olof@lixom.net>
Move the Trusted Foundations support out of arch/arm/firmware and into
drivers/firmware where most other firmware support implementations are
located.
Signed-off-by: Thierry Reding <treding@nvidia.com>
PSCI v1.1 introduced SYSTEM_RESET2 to allow both architectural resets
where the semantics are described by the PSCI specification itself as
well as vendor-specific resets. Currently only system warm reset
semantics is defined as part of architectural resets by the specification.
This patch implements support for SYSTEM_RESET2 by making using of
reboot_mode passed by the reboot infrastructure in the kernel.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This Patch Adds fpga API's to support the Bitstream loading
by using firmware interface.
Signed-off-by: Nava kishore Manne <nava.manne@xilinx.com>
Reviewed-by: Moritz Fischer <mdf@kernel.org>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
of_match_device can return NULL if no matching device is found though
it's highly unlikely to happen in scmi_probe as it's called only if
a valid match is found.
However we can use of_device_get_match_data() instead of
of_match_device()->data to handle NULL pointer checks and return -EINVAL
in such a scenario.
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
of_parse_phandle_with_args() requires the caller to call of_node_put() on
the returned args->np pointer. Otherwise the reference count will remain
incremented.
However, in this case, since we don't actually use the returned pointer,
we can simply pass in NULL.
Fixes: aa4f886f38 ("firmware: arm_scmi: add basic driver infrastructure for SCMI")
Signed-off-by: Steven Price <steven.price@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
PSCI firmware v1.0+, supports two different modes for CPU_SUSPEND.
The Platform Coordinated mode, which is the default and mandatory
mode, while support for the OS initiated (OSI) mode is optional.
In some cases it's interesting for the user/developer to know if
the OSI mode is supported by the PSCI FW, so print a message to
the log if that is the case.
Co-developed-by: Lina Iyer <lina.iyer@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Instead of having each PSCI init function taking care of the
of_node_put(), deal with that from psci_dt_init(), as this enables
a bit simpler error path for each PSCI init function.
Co-developed-by: Lina Iyer <lina.iyer@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Split the psci_dt_cpu_init_idle() function into two functions. This
makes the code clearer and provides better re-usability.
Co-developed-by: Lina Iyer <lina.iyer@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Some following changes extends the PSCI driver with some additional
files. Avoid to continue cluttering the toplevel firmware directory
and first move the PSCI files into a PSCI sub-directory.
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The System Controller Firmware (SCFW) controls RTC, thermal
and WDOG etc., these resources' interrupt function are managed
by SCU. When any IRQ pending, SCU will notify Linux via MU general
interrupt channel #3, and Linux kernel needs to call SCU APIs
to get IRQ status and notify each module to handle the interrupt.
Since there is no data transmission for SCU IRQ notification, so
doorbell mode is used for this MU channel, and SCU driver will
use notifier mechanism to broadcast to every module which registers
the SCU block notifier.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
In preparation for arm64 supporting ftrace built on other compiler
options, let's have Makefiles remove the $(CC_FLAGS_FTRACE) flags,
whatever these maybe, rather than assuming '-pg'.
While at it, fix arm32 as well. There should be no functional change as
a result of this patch.
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Torsten Duwe <duwe@suse.de>
Signed-off-by: Will Deacon <will.deacon@arm.com>
ACPICA commit 24870bd9e73d71e2a1ff0a1e94519f8f8409e57d
ACPI_NAME_SIZE changed to ACPI_NAMESEG_SIZE
This clarifies that this is the length of an individual
nameseg, not the length of a generic namestring/namepath.
Improves understanding of the code.
Link: https://github.com/acpica/acpica/commit/24870bd9
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Commit f922c4abdf ("module: allow symbol exports to be disabled")
introduced a way to inhibit generation of kcrctab/ksymtab sections
when building ordinary kernel code to be used in a different execution
context (decompressor, EFI stub, etc)
That means we no longer have to strip those sections explicitly when
building the EFI libstub objects, so drop this from the Makefile.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20190328193429.21373-6-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
All architectures (arm/arm64, ia64 and x86) do the same here, so unify
the code.
Note: We do not need to call dump_stack_set_arch_desc() in case of
!dmi_available. Both strings, dmi_ids_string and dump_stack_arch_
desc_str are initialized zero and thus nothing would change.
Signed-off-by: Robert Richter <rrichter@marvell.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20190328193429.21373-5-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Run dmi_memdev_walk() for arch arm* as other architectures do.
This improves error logging as the memory device handle is
translated now to the DIMM entry's name provided by the DMI handle.
Before:
{1}[Hardware Error]: DIMM location: not present. DMI handle: 0x0038
After:
{1}[Hardware Error]: DIMM location: N0 DIMM_A0
Signed-off-by: Marcin Benka <mbenka@marvell.com>
Signed-off-by: Robert Richter <rrichter@marvell.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20190328193429.21373-4-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
It took me a while to understand what is going on in the nested
if-blocks.
Simplify it by removing unneeded code.
- if_changed automatically adds 'set -e', so any failure in the
series of commands makes it immediately fail as a whole.
So, the outer if block is entirely redundant.
- Since commit 9c2af1c737 ("kbuild: add .DELETE_ON_ERROR special target"),
GNU Make automatically deletes the target on any failure
in its recipe. The explicit 'rm -f $@' is redundant.
- Surrounding commands with ( ) will spawn a subshell to execute them
in it, but it is rarely useful to do so.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20190328193429.21373-2-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
memremap() doesn't return an iomem pointer, so we can just use memcpy()
and drop the __iomem annotation here. This silences a sparse warning.
Cc: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Anton Vasilyev <vasilyev@ispras.ru>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As resource power domain service is provided by SCU firmware, no
SS information required. So we can remove the SS indicator from
the domain names, then the domains defined can be better shared
among different SCU based platforms.
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Kevin Hilman <khilman@kernel.org>
Cc: linux-pm@vger.kernel.org
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
As the domain resource id in the same type may not be continuous, so it's
hard to describe all such power domains with current struct imx_sc_pd_range.
Adding the optional base for domain name index to address this issue.
Then we can add the discrete domains easily later.
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Kevin Hilman <khilman@kernel.org>
Cc: linux-pm@vger.kernel.org
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Using bool instead 0/1 to indicate whether adding a postfix for domain
names which can improve the code readability and less confusing.
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Kevin Hilman <khilman@kernel.org>
Cc: linux-pm@vger.kernel.org
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Driver needs ZynqMP firmware interface to call EEMI
APIs. In case firmware is not ready, dependent drivers
should wait until the firmware is ready.
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Jolly Shah <jollys@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
- Userspace wants to write a string with `len` bytes, not counting the
terminating NULL, so we should allocate `len+1` bytes. It looks like the
current code relied on having a nullbyte directly behind `kern_buff`,
which happens to work reliably as long as `len` isn't one of the kmalloc
size classes.
- strncpy_from_user() is completely wrong here; userspace is giving us a
(not necessarily null-terminated) buffer and its length.
strncpy_from_user() is for cases in which we don't know the length.
- Don't let broken userspace allocate arbitrarily big kmalloc allocations.
Just use memdup_user_nul(), which is designed precisely for things like
this.
Signed-off-by: Jann Horn <jannh@google.com>
Acked-by: Jolly Shah <jolly.shah@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
As all the memblock allocation functions return NULL in case of error
rather than panic(), the duplicates with _nopanic suffix can be removed.
Link: http://lkml.kernel.org/r/1548057848-15136-22-git-send-email-rppt@linux.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Petr Mladek <pmladek@suse.com> [printk]
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: Christoph Hellwig <hch@lst.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Guo Ren <guoren@kernel.org>
Cc: Guo Ren <ren_guo@c-sky.com> [c-sky]
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Juergen Gross <jgross@suse.com> [Xen]
Cc: Mark Salter <msalter@redhat.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Pseudo NMI support for arm64 using GICv3 interrupt priorities
- uaccess macros clean-up (unsafe user accessors also merged but
reverted, waiting for objtool support on arm64)
- ptrace regsets for Pointer Authentication (ARMv8.3) key management
- inX() ordering w.r.t. delay() on arm64 and riscv (acks in place by the
riscv maintainers)
- arm64/perf updates: PMU bindings converted to json-schema, unused
variable and misleading comment removed
- arm64/debug fixes to ensure checking of the triggering exception level
and to avoid the propagation of the UNKNOWN FAR value into the si_code
for debug signals
- Workaround for Fujitsu A64FX erratum 010001
- lib/raid6 ARM NEON optimisations
- NR_CPUS now defaults to 256 on arm64
- Minor clean-ups (documentation/comments, Kconfig warning, unused
asm-offsets, clang warnings)
- MAINTAINERS update for list information to the ARM64 ACPI entry
-----BEGIN PGP SIGNATURE-----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=2U56
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
- Pseudo NMI support for arm64 using GICv3 interrupt priorities
- uaccess macros clean-up (unsafe user accessors also merged but
reverted, waiting for objtool support on arm64)
- ptrace regsets for Pointer Authentication (ARMv8.3) key management
- inX() ordering w.r.t. delay() on arm64 and riscv (acks in place by
the riscv maintainers)
- arm64/perf updates: PMU bindings converted to json-schema, unused
variable and misleading comment removed
- arm64/debug fixes to ensure checking of the triggering exception
level and to avoid the propagation of the UNKNOWN FAR value into the
si_code for debug signals
- Workaround for Fujitsu A64FX erratum 010001
- lib/raid6 ARM NEON optimisations
- NR_CPUS now defaults to 256 on arm64
- Minor clean-ups (documentation/comments, Kconfig warning, unused
asm-offsets, clang warnings)
- MAINTAINERS update for list information to the ARM64 ACPI entry
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (54 commits)
arm64: mmu: drop paging_init comments
arm64: debug: Ensure debug handlers check triggering exception level
arm64: debug: Don't propagate UNKNOWN FAR into si_code for debug signals
Revert "arm64: uaccess: Implement unsafe accessors"
arm64: avoid clang warning about self-assignment
arm64: Kconfig.platforms: fix warning unmet direct dependencies
lib/raid6: arm: optimize away a mask operation in NEON recovery routine
lib/raid6: use vdupq_n_u8 to avoid endianness warnings
arm64: io: Hook up __io_par() for inX() ordering
riscv: io: Update __io_[p]ar() macros to take an argument
asm-generic/io: Pass result of I/O accessor to __io_[p]ar()
arm64: Add workaround for Fujitsu A64FX erratum 010001
arm64: Rename get_thread_info()
arm64: Remove documentation about TIF_USEDFPU
arm64: irqflags: Fix clang build warnings
arm64: Enable the support of pseudo-NMIs
arm64: Skip irqflags tracing for NMI in IRQs disabled context
arm64: Skip preemption when exiting an NMI
arm64: Handle serror in NMI context
irqchip/gic-v3: Allow interrupts to be set as pseudo-NMI
...
Pull ibft updates from Konrad Rzeszutek Wilk:
"Two tiny fixes - a missing break, and upgrading the subsystem to use
modern macros"
* 'stable/for-linus-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/ibft:
iscsi_ibft: use virt_to_phys instead of isa_virt_to_bus
iscsi_ibft: Fix missing break in switch statement
Here is the big driver core patchset for 5.1-rc1
More patches than "normal" here this merge window, due to some work in
the driver core by Alexander Duyck to rework the async probe
functionality to work better for a number of devices, and independant
work from Rafael for the device link functionality to make it work
"correctly".
Also in here is:
- lots of BUS_ATTR() removals, the macro is about to go away
- firmware test fixups
- ihex fixups and simplification
- component additions (also includes i915 patches)
- lots of minor coding style fixups and cleanups.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXH+euQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynyTgCfbV8CLums843sBnT8NnWrTMTdTCcAn1K4re0m
ep8g+6oRLxJy414hogxQ
=bLs2
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the big driver core patchset for 5.1-rc1
More patches than "normal" here this merge window, due to some work in
the driver core by Alexander Duyck to rework the async probe
functionality to work better for a number of devices, and independant
work from Rafael for the device link functionality to make it work
"correctly".
Also in here is:
- lots of BUS_ATTR() removals, the macro is about to go away
- firmware test fixups
- ihex fixups and simplification
- component additions (also includes i915 patches)
- lots of minor coding style fixups and cleanups.
All of these have been in linux-next for a while with no reported
issues"
* tag 'driver-core-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (65 commits)
driver core: platform: remove misleading err_alloc label
platform: set of_node in platform_device_register_full()
firmware: hardcode the debug message for -ENOENT
driver core: Add missing description of new struct device_link field
driver core: Fix PM-runtime for links added during consumer probe
drivers/component: kerneldoc polish
async: Add cmdline option to specify drivers to be async probed
driver core: Fix possible supplier PM-usage counter imbalance
PM-runtime: Fix __pm_runtime_set_status() race with runtime resume
driver: platform: Support parsing GpioInt 0 in platform_get_irq()
selftests: firmware: fix verify_reqs() return value
Revert "selftests: firmware: remove use of non-standard diff -Z option"
Revert "selftests: firmware: add CONFIG_FW_LOADER_USER_HELPER_FALLBACK to config"
device: Fix comment for driver_data in struct device
kernfs: Allocating memory for kernfs_iattrs with kmem_cache.
sysfs: remove unused include of kernfs-internal.h
driver core: Postpone DMA tear-down until after devres release
driver core: Document limitation related to DL_FLAG_RPM_ACTIVE
PM-runtime: Take suppliers into account in __pm_runtime_set_status()
device.h: Add __cold to dev_<level> logging functions
...
- Update the ACPICA code in the kernel to upstream revision 20190215
including ACPI 6.3 support and more:
* New predefined methods: _NBS, _NCH, _NIC, _NIH, and _NIG (Erik
Schmauss).
* Update of the PCC Identifier structure in PDTT (Erik Schmauss).
* Support for new Generic Affinity Structure subtable in SRAT
(Erik Schmauss).
* New PCC operation region support (Erik Schmauss).
* Support for GICC statistical profiling for MADT (Erik Schmauss).
* New Error Disconnect Recover notification support (Erik Schmauss).
* New PPTT Processor Structure Flags fields support (Erik Schmauss).
* ACPI 6.3 HMAT updates (Erik Schmauss).
* GTDT Revision 3 support (Erik Schmauss).
* Legacy module-level code (MLC) support removal (Erik Schmauss).
* Update/clarification of messages for control method failures
(Bob Moore).
* Warning on creation of a zero-length opregion (Bob Moore).
* acpiexec option to dump extra info for memory leaks (Bob Moore).
* More ACPI error to firmware error conversions (Bob Moore).
* Debugger fix (Bob Moore).
* Copyrights update (Bob Moore).
- Clean up sleep states support code in ACPICA (Christoph Hellwig).
- Rework in_nmi() handling in the APEI code and add suppor for the
ARM Software Delegated Exception Interface (SDEI) to it (James
Morse).
- Fix possible out-of-bounds accesses in BERT-related core (Ross
Lagerwall).
- Fix the APEI code parsing HEST that includes a Deferred Machine
Check subtable (Yazen Ghannam).
- Use DEFINE_DEBUGFS_ATTRIBUTE for APEI-related debugfs files
(YueHaibing).
- Switch the APEI ERST code to the new generic UUID API (Andy
Shevchenko).
- Update the MAINTAINERS entry for APEI (Borislav Petkov).
- Fix and clean up the ACPI EC driver (Rafael Wysocki, Zhang Rui).
- Fix DMI checks handling in the ACPI backlight driver and add the
"Lunch Box" chassis-type check to it (Hans de Goede).
- Add support for using ACPI table overrides included in built-in
initrd images (Shunyong Yang).
- Update ACPI device enumeration to treat the PWM2 device as "always
present" on Lenovo Yoga Book (Yauhen Kharuzhy).
- Fix up the enumeration of device objects with the PRP0001 device
ID (Andy Shevchenko).
- Clean up PPTT parsing error messages (John Garry).
- Clean up debugfs files creation handling (Greg Kroah-Hartman,
Rafael Wysocki).
- Clean up the ACPI DPTF Makefile (Masahiro Yamada).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=r6fU
-----END PGP SIGNATURE-----
Merge tag 'acpi-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These are ACPICA updates including ACPI 6.3 support among other
things, APEI updates including the ARM Software Delegated Exception
Interface (SDEI) support, ACPI EC driver fixes and cleanups and other
assorted improvements.
Specifics:
- Update the ACPICA code in the kernel to upstream revision 20190215
including ACPI 6.3 support and more:
* New predefined methods: _NBS, _NCH, _NIC, _NIH, and _NIG (Erik
Schmauss).
* Update of the PCC Identifier structure in PDTT (Erik Schmauss).
* Support for new Generic Affinity Structure subtable in SRAT
(Erik Schmauss).
* New PCC operation region support (Erik Schmauss).
* Support for GICC statistical profiling for MADT (Erik Schmauss).
* New Error Disconnect Recover notification support (Erik
Schmauss).
* New PPTT Processor Structure Flags fields support (Erik
Schmauss).
* ACPI 6.3 HMAT updates (Erik Schmauss).
* GTDT Revision 3 support (Erik Schmauss).
* Legacy module-level code (MLC) support removal (Erik Schmauss).
* Update/clarification of messages for control method failures
(Bob Moore).
* Warning on creation of a zero-length opregion (Bob Moore).
* acpiexec option to dump extra info for memory leaks (Bob Moore).
* More ACPI error to firmware error conversions (Bob Moore).
* Debugger fix (Bob Moore).
* Copyrights update (Bob Moore)
- Clean up sleep states support code in ACPICA (Christoph Hellwig)
- Rework in_nmi() handling in the APEI code and add suppor for the
ARM Software Delegated Exception Interface (SDEI) to it (James
Morse)
- Fix possible out-of-bounds accesses in BERT-related core (Ross
Lagerwall)
- Fix the APEI code parsing HEST that includes a Deferred Machine
Check subtable (Yazen Ghannam)
- Use DEFINE_DEBUGFS_ATTRIBUTE for APEI-related debugfs files
(YueHaibing)
- Switch the APEI ERST code to the new generic UUID API (Andy
Shevchenko)
- Update the MAINTAINERS entry for APEI (Borislav Petkov)
- Fix and clean up the ACPI EC driver (Rafael Wysocki, Zhang Rui)
- Fix DMI checks handling in the ACPI backlight driver and add the
"Lunch Box" chassis-type check to it (Hans de Goede)
- Add support for using ACPI table overrides included in built-in
initrd images (Shunyong Yang)
- Update ACPI device enumeration to treat the PWM2 device as "always
present" on Lenovo Yoga Book (Yauhen Kharuzhy)
- Fix up the enumeration of device objects with the PRP0001 device ID
(Andy Shevchenko)
- Clean up PPTT parsing error messages (John Garry)
- Clean up debugfs files creation handling (Greg Kroah-Hartman,
Rafael Wysocki)
- Clean up the ACPI DPTF Makefile (Masahiro Yamada)"
* tag 'acpi-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (65 commits)
ACPI / bus: Respect PRP0001 when retrieving device match data
ACPICA: Update version to 20190215
ACPI/ACPICA: Trivial: fix spelling mistakes and fix whitespace formatting
ACPICA: ACPI 6.3: add GTDT Revision 3 support
ACPICA: ACPI 6.3: HMAT updates
ACPICA: ACPI 6.3: PPTT add additional fields in Processor Structure Flags
ACPICA: ACPI 6.3: add Error Disconnect Recover Notification value
ACPICA: ACPI 6.3: MADT: add support for statistical profiling in GICC
ACPICA: ACPI 6.3: add PCC operation region support for AML interpreter
efi: cper: Fix possible out-of-bounds access
ACPI: APEI: Fix possible out-of-bounds access to BERT region
ACPICA: ACPI 6.3: SRAT: add Generic Affinity Structure subtable
ACPICA: ACPI 6.3: Add Trigger order to PCC Identifier structure in PDTT
ACPICA: ACPI 6.3: Adding predefined methods _NBS, _NCH, _NIC, _NIH, and _NIG
ACPICA: Update/clarify messages for control method failures
ACPICA: Debugger: Fix possible fault with the "test objects" command
ACPICA: Interpreter: Emit warning for creation of a zero-length op region
ACPICA: Remove legacy module-level code support
ACPI / x86: Make PWM2 device always present at Lenovo Yoga Book
ACPI / video: Extend chassis-type detection with a "Lunch Box" check
..
As usual, the drivers/tee and drivers/reset subsystems get merged
here, with the expected set of smaller updates and some new hardware
support. The tee subsystem now supports device drivers to be attached
to a tee, the first example here is a random number driver with its
implementation in the secure world.
Three new power domain drivers get added for specific chip families:
- Broadcom BCM283x chips (used in Raspberry Pi)
- Qualcomm Snapdragon phone chips
- Xilinx ZynqMP FPGA SoCs
One new driver is added to talk to the BPMP firmware on NVIDIA
Tegra210
Existing drivers are extended for new SoC variants from NXP,
NVIDIA, Amlogic and Qualcomm.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=+DOl
-----END PGP SIGNATURE-----
Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"As usual, the drivers/tee and drivers/reset subsystems get merged
here, with the expected set of smaller updates and some new hardware
support. The tee subsystem now supports device drivers to be attached
to a tee, the first example here is a random number driver with its
implementation in the secure world.
Three new power domain drivers get added for specific chip families:
- Broadcom BCM283x chips (used in Raspberry Pi)
- Qualcomm Snapdragon phone chips
- Xilinx ZynqMP FPGA SoCs
One new driver is added to talk to the BPMP firmware on NVIDIA
Tegra210
Existing drivers are extended for new SoC variants from NXP, NVIDIA,
Amlogic and Qualcomm"
* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (113 commits)
tee: optee: update optee_msg.h and optee_smc.h to dual license
tee: add cancellation support to client interface
dpaa2-eth: configure the cache stashing amount on a queue
soc: fsl: dpio: configure cache stashing destination
soc: fsl: dpio: enable frame data cache stashing per software portal
soc: fsl: guts: make fsl_guts_get_svr() static
hwrng: make symbol 'optee_rng_id_table' static
tee: optee: Fix unsigned comparison with less than zero
hwrng: Fix unsigned comparison with less than zero
tee: fix possible error pointer ctx dereferencing
hwrng: optee: Initialize some structs using memset instead of braces
tee: optee: Initialize some structs using memset instead of braces
soc: fsl: dpio: fix memory leak of a struct qbman on error exit path
clk: tegra: dfll: Make symbol 'tegra210_cpu_cvb_tables' static
soc: qcom: llcc-slice: Fix typos
qcom: soc: llcc-slice: Consolidate some code
qcom: soc: llcc-slice: Clear the global drv_data pointer on error
drivers: soc: xilinx: Add ZynqMP power domain driver
firmware: xilinx: Add APIs to control node status/power
dt-bindings: power: Add ZynqMP power domain bindings
...
Pull EFI updates from Ingo Molnar:
"The main EFI changes in this cycle were:
- Use 32-bit alignment for efi_guid_t
- Allow the SetVirtualAddressMap() call to be omitted
- Implement earlycon=efifb based on existing earlyprintk code
- Various minor fixes and code cleanups from Sai, Ard and me"
* 'efi-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi: Fix build error due to enum collision between efi.h and ima.h
efi/x86: Convert x86 EFI earlyprintk into generic earlycon implementation
x86: Make ARCH_USE_MEMREMAP_PROT a generic Kconfig symbol
efi/arm/arm64: Allow SetVirtualAddressMap() to be omitted
efi: Replace GPL license boilerplate with SPDX headers
efi/fdt: Apply more cleanups
efi: Use 32-bit alignment for efi_guid_t
efi/memattr: Don't bail on zero VA if it equals the region's PA
x86/efi: Mark can_free_region() as an __init function
* acpi-apei: (29 commits)
efi: cper: Fix possible out-of-bounds access
ACPI: APEI: Fix possible out-of-bounds access to BERT region
MAINTAINERS: Add James Morse to the list of APEI reviewers
ACPI / APEI: Add support for the SDEI GHES Notification type
firmware: arm_sdei: Add ACPI GHES registration helper
ACPI / APEI: Use separate fixmap pages for arm64 NMI-like notifications
ACPI / APEI: Only use queued estatus entry during in_nmi_queue_one_entry()
ACPI / APEI: Split ghes_read_estatus() to allow a peek at the CPER length
ACPI / APEI: Make GHES estatus header validation more user friendly
ACPI / APEI: Pass ghes and estatus separately to avoid a later copy
ACPI / APEI: Let the notification helper specify the fixmap slot
ACPI / APEI: Move locking to the notification helper
arm64: KVM/mm: Move SEA handling behind a single 'claim' interface
KVM: arm/arm64: Add kvm_ras.h to collect kvm specific RAS plumbing
ACPI / APEI: Switch NOTIFY_SEA to use the estatus queue
ACPI / APEI: Move NOTIFY_SEA between the estatus-queue and NOTIFY_NMI
ACPI / APEI: Don't allow ghes_ack_error() to mask earlier errors
ACPI / APEI: Generalise the estatus queue's notify code
ACPI / APEI: Don't update struct ghes' flags in read/clear estatus
ACPI / APEI: Remove spurious GHES_TO_CLEAR check
...
When checking a generic status block, we iterate over all the generic
data blocks. The loop condition only checks that the start of the
generic data block is valid (within estatus->data_length) but not the
whole block. Because the size of data blocks (excluding error data) may
vary depending on the revision and the revision is contained within the
data block, ensure that enough of the current data block is valid before
dereferencing any members otherwise an out-of-bounds access may occur if
estatus->data_length is invalid.
This relies on the fact that struct acpi_hest_generic_data_v300 is a
superset of the earlier version. Also rework the other checks to avoid
potential underflow.
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Acked-by: Borislav Petkov <bp@suse.de>
Tested-by: Tyler Baicar <baicar.tyler@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Pull EFI fixes from Ingo Molnar:
"This tree reverts a GICv3 commit (which was broken) and fixes it in
another way, by adding a memblock build-time entries quirk for ARM64"
* 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi/arm: Revert "Defer persistent reservations until after paging_init()"
arm64, mm, efi: Account for GICv3 LPI tables in static memblock reserve table
Pull x86 fixes from Ingo Molnar:
"Three changes:
- An UV fix/quirk to pull UV BIOS calls into the efi_runtime_lock
locking regime. (This done by aliasing __efi_uv_runtime_lock to
efi_runtime_lock, which should make the quirk nature obvious and
maintain the general policy that the EFI lock (name...) isn't
exposed to drivers.)
- Our version of MAGA: Make a.out Great Again.
- Add a new Intel model name enumerator to an upstream header to help
reduce dependencies going forward"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/platform/UV: Use efi_runtime_lock to serialise BIOS calls
x86/CPU: Add Icelake model number
x86/a.out: Clear the dump structure initially
This reverts commit eff8962888, which
deferred the processing of persistent memory reservations to a point
where the memory may have already been allocated and overwritten,
defeating the purpose.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20190215123333.21209-3-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The following commit:
a893ea15d764 ("tpm: move tpm_chip definition to include/linux/tpm.h")
introduced a build error when both IMA and EFI are enabled:
In file included from ../security/integrity/ima/ima_fs.c:30:
../security/integrity/ima/ima.h:176:7: error: redeclaration of enumerator "NONE"
What happens is that both headers (ima.h and efi.h) defines the same
'NONE' constant, and it broke when they started getting included from
the same file:
Rework to prefix the EFI enum with 'EFI_*'.
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20190215165551.12220-2-ard.biesheuvel@linaro.org
[ Cleaned up the changelog a bit. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
- Fix the Clang warning for enum in Navigator dma
- Simplify code in ti_sci with DEFINE_SHOW_ATTRIBUTE macro
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=h0cu
-----END PGP SIGNATURE-----
Merge tag 'drivers_soc_for_5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into arm/drivers
soc: ti: couple of non critical fixes for v5.1
- Fix the Clang warning for enum in Navigator dma
- Simplify code in ti_sci with DEFINE_SHOW_ATTRIBUTE macro
* tag 'drivers_soc_for_5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone:
soc: ti: knav_dma: Use proper enum in pktdma_init_chan
firmware: ti_sci: Change to use DEFINE_SHOW_ATTRIBUTE macro
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
for 5.1, please pull the following:
- Stefan updates the BCM2835 SoC driver with downstream properties and
uses that to implement a reboot notifier to tell the VC4 firmware when
Linux on the ARM CPU is rebooting
- Eric adds a proper power domain driver for the BCM283x SoCs and
updates a bunch of drivers to have a better and clearer Device Tree
definition to support power domains/breaking up of functionality. This
requires converting the existing watchdog driver into a MFD and then
breaking up the functionality into separate drivers and finally
updating the DTS files to leverage the power domains information.
- Wei provides a fix for making a symbol static
-----BEGIN PGP SIGNATURE-----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=t5+u
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-5.1/drivers' of https://github.com/Broadcom/stblinux into arm/drivers
This pull request contains Broadcom ARM/ARM64/MIPS based SoCs changes
for 5.1, please pull the following:
- Stefan updates the BCM2835 SoC driver with downstream properties and
uses that to implement a reboot notifier to tell the VC4 firmware when
Linux on the ARM CPU is rebooting
- Eric adds a proper power domain driver for the BCM283x SoCs and
updates a bunch of drivers to have a better and clearer Device Tree
definition to support power domains/breaking up of functionality. This
requires converting the existing watchdog driver into a MFD and then
breaking up the functionality into separate drivers and finally
updating the DTS files to leverage the power domains information.
- Wei provides a fix for making a symbol static
* tag 'arm-soc/for-5.1/drivers' of https://github.com/Broadcom/stblinux:
ARM: bcm283x: Switch V3D over to using the PM driver instead of firmware.
ARM: bcm283x: Extend the WDT DT node out to cover the whole PM block. (v4)
soc: bcm: bcm2835-pm: Make local symbol static
soc: bcm: Make PM driver default for BCM2835
soc: bcm: bcm2835-pm: Add support for power domains under a new binding.
bcm2835-pm: Move bcm2835-watchdog's DT probe to an MFD.
dt-bindings: soc: Add a new binding for the BCM2835 PM node. (v4)
firmware: raspberrypi: notify VC4 firmware of a reboot
soc: bcm2835: sync firmware properties with downstream
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
These changes add support for BPMP on Tegra210.
-----BEGIN PGP SIGNATURE-----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=8HHq
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-5.1-firmware' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/drivers
firmware: tegra: Changes for v5.1-rc1
These changes add support for BPMP on Tegra210.
* tag 'tegra-for-5.1-firmware' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
firmware/tegra: Enable Tegra186 BPMP support on Tegra194
firmware: tegra: Conditionally support SoC generations
firmware: tegra: bpmp-tegra186: Remove unused includes
firmware: tegra: add bpmp driver for Tegra210
firmware: tegra: Refactor BPMP driver
firmware: tegra: Reword messaging terminology
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Do not get GPCv2 driver depend on SOC_IMX8MQ since the driver is
going to be used on more SoCs than just i.MX8MQ.
- Add power domain information into SCU bindings document.
- Add support of start/stop a CPU into imx firmware driver.
- Support multiple address ranges per child node for imx-weim bus
driver.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJcYi+0AAoJEFBXWFqHsHzOtdYH/jX/y0r7OvX5GVSrrnW8PlkC
3i2EQ0sGOxWOMqBegZIpFe9W7IddAetMf6praPGz/efHPnoVC4jO8Yqe4TZwQXLB
vOxoN4G7NH9Al9RX11ce96kd/tUgVK/JHuQJ9fu+ogrprLpAS3w1sbIkidOMSF3M
/5VrmFCxUNOPwTHRnyjw8QsyypKnKEBu0jA8sgyUmg99ii6rqQ5OKh1vgKf62J0f
1BbJLalI0CxGcYVQxYBy2ML37+XxCcN9Vl8FxiI4tVRtZox8/YkU9V5vEgVWN2fS
ZWfgT9w7cJxI5x8Em8Cxe4zcyVdbn5w26lXc6WbXazIncm206Ps+DIeHkQI9jPA=
=8C2m
-----END PGP SIGNATURE-----
Merge tag 'imx-drivers-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/drivers
i.MX drivers update for 5.1:
- Do not get GPCv2 driver depend on SOC_IMX8MQ since the driver is
going to be used on more SoCs than just i.MX8MQ.
- Add power domain information into SCU bindings document.
- Add support of start/stop a CPU into imx firmware driver.
- Support multiple address ranges per child node for imx-weim bus
driver.
* tag 'imx-drivers-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
firmware: imx: Add support to start/stop a CPU
soc: imx: Break dependency on SOC_IMX8MQ for GPCv2
firmware: imx: scu-pd: add fallback compatible string support
dt-bindings: fsl: scu: add imx8qm scu power domain support
dt-bindings: fsl: scu: add fallback compatible string for power domain
bus: imx-weim: guard against timing configuration conflicts
bus: imx-weim: support multiple address ranges per child node
dt-bindings: bus: imx-weim: document multiple address ranges per child node
soc: imx: gpcv2: handle reset clocks
soc: imx: gpcv2: handle additional power-down bits in handshake register
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
As far as I can tell IBFT is a firmware table and has nothing to do with
the good old ISA bus. And even if it the two would be the same on x86
anyway. So remove the isa_virt_to_bus call in preparation of eventually
removing that API entirely.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Add missing break statement in order to prevent the code from falling
through to case ISCSI_BOOT_TGT_NAME, which is unnecessary.
This bug was found thanks to the ongoing efforts to enable
-Wimplicit-fallthrough.
Fixes: b33a84a384 ("ibft: convert iscsi_ibft module to iscsi boot lib")
Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
The zynqmp-genpd driver communicates the usage requirements
for logical power domains / devices to the platform FW.
FW is responsible for choosing appropriate power states,
taking Linux' usage information into account.
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Add Xilinx ZynqMP firmware APIs to control node status
and power. These APIs allows turning on/off power domain
and setting capabilities of devices present in power domain.
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Add Xilinx ZynqMP firmware APIs to set suspend mode
and inform firmware that master has initialized its
own power management.
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
APEI's Generic Hardware Error Source structures do not describe
whether the SDEI event is shared or private, as this information is
discoverable via the API.
GHES needs to know whether an event is normal or critical to avoid
sharing locks or fixmap entries, but GHES shouldn't have to know about
the SDEI API.
Add a helper to register the GHES using the appropriate normal or
critical callback.
Signed-off-by: James Morse <james.morse@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This is done via RPC call to SCU.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This is a bit larger than normal, as we had not managed to send out
a pull request before traveling for a week without my signing key.
There are multiple code fixes for older bugs, all of which should
get backported into stable kernels:
- tango: one fix for multiplatform configurations broken on other
platforms when tango is enabled
- arm_scmi: device unregistration fix
- iop32x: fix kernel oops from extraneous __init annotation
- pxa: remove a double kfree
- fsl qbman: close an interrupt clearing race
The rest is the usual collection of smaller fixes for device tree
files, on the renesas, allwinner, meson, omap, davinci, qualcomm
and imx platforms. Some of these are for compile-time warnings,
most are for board specific functionality that fails to work
because of incorrect settings.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=koHS
-----END PGP SIGNATURE-----
Merge tag 'armsoc-fixes-5.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"This is a bit larger than normal, as we had not managed to send out a
pull request before traveling for a week without my signing key.
There are multiple code fixes for older bugs, all of which should get
backported into stable kernels:
- tango: one fix for multiplatform configurations broken on other
platforms when tango is enabled
- arm_scmi: device unregistration fix
- iop32x: fix kernel oops from extraneous __init annotation
- pxa: remove a double kfree
- fsl qbman: close an interrupt clearing race
The rest is the usual collection of smaller fixes for device tree
files, on the renesas, allwinner, meson, omap, davinci, qualcomm and
imx platforms.
Some of these are for compile-time warnings, most are for board
specific functionality that fails to work because of incorrect
settings"
* tag 'armsoc-fixes-5.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (30 commits)
ARM: tango: Improve ARCH_MULTIPLATFORM compatibility
firmware: arm_scmi: provide the mandatory device release callback
ARM: iop32x/n2100: fix PCI IRQ mapping
arm64: dts: add msm8996 compatible to gicv3
ARM: dts: am335x-shc.dts: fix wrong cd pin level
ARM: dts: n900: fix mmc1 card detect gpio polarity
ARM: dts: omap3-gta04: Fix graph_port warning
ARM: pxa: ssp: unneeded to free devm_ allocated data
ARM: dts: r8a7743: Convert to new LVDS DT bindings
soc: fsl: qbman: avoid race in clearing QMan interrupt
arm64: dts: renesas: r8a77965: Enable DMA for SCIF2
arm64: dts: renesas: r8a7796: Enable DMA for SCIF2
arm64: dts: renesas: r8a774a1: Enable DMA for SCIF2
ARM: dts: da850: fix interrupt numbers for clocksource
dt-bindings: imx8mq: Number clocks consecutively
arm64: dts: meson: Fix mmc cd-gpios polarity
ARM: dts: imx6sx: correct backward compatible of gpt
ARM: dts: imx: replace gpio-key,wakeup with wakeup-source property
ARM: dts: vf610-bk4: fix incorrect #address-cells for dspi3
ARM: dts: meson8m2: mxiii-plus: mark the SD card detection GPIO active-low
...
The BPMP implementation on Tegra194 is mostly compatible with the
implementation on Tegra186, so make sure the latter is available when
support for Tegra194 is enabled.
Suggested-by: Timo Alho <talho@nvidia.com>
Reviewed-by: Timo Alho <talho@nvidia.com>
Tested-by: Timo Alho <talho@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Only include support for Tegra210 and Tegra186 in the BPMP driver if
support for those SoCs was selected. This fixes a build failure seen
on 32-bit ARM allmodconfig builds, but could also happen on 64-bit
ARM builds if either Tegra210 or Tegra186 were not selected.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Timo Alho <talho@nvidia.com>
Tested-by: Timo Alho <talho@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Currently, irqflags are saved before calling runtime services and
checked for mismatch on return.
Provide a pair of overridable macros to save and restore (if needed) the
state that need to be preserved on return from a runtime service.
This allows to check for flags that are not necesarly related to
irqflags.
Signed-off-by: Julien Thierry <julien.thierry@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: linux-efi@vger.kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
This patch adds a new API to provide access to the
hardware related data like soc revision, IDCODE... etc.
Signed-off-by: Nava kishore Manne <nava.manne@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
As of commit e2a2e56e40 ("arm64: dump: no need to check return value
of debugfs_create functions") in the arm64 for-next/core branch,
ptdump_debugfs_register does not have a return value, which causes a
build error here:
drivers/firmware/efi/arm-runtime.c:51:9: error: returning 'void' from a
function with incompatible result type 'int'
return ptdump_debugfs_register(&efi_ptdump_info, "efi_page_tables");
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 error generated.
The arm version is still awaiting acceptance [1] but in anticipation
of that patch being merged, restructure this function to call
ptdump_debugfs_register without expecting a return value.
[1]: https://lore.kernel.org/lkml/20190122144114.9816-3-gregkh@linuxfoundation.org/
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Move the x86 EFI earlyprintk implementation to a shared location under
drivers/firmware and tweak it slightly so we can expose it as an earlycon
implementation (which is generic) rather than earlyprintk (which is only
implemented for a few architectures)
This also involves switching to write-combine mappings by default (which
is required on ARM since device mappings lack memory semantics, and so
memcpy/memset may not be used on them), and adding support for shared
memory framebuffers on cache coherent non-x86 systems (which do not
tolerate mismatched attributes).
Note that 32-bit ARM does not populate its struct screen_info early
enough for earlycon=efifb to work, so it is disabled there.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Alexander Graf <agraf@suse.de>
Cc: AKASHI Takahiro <takahiro.akashi@linaro.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
Cc: Jeffrey Hugo <jhugo@codeaurora.org>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Peter Jones <pjones@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20190202094119.13230-10-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The UEFI spec revision 2.7 errata A section 8.4 has the following to
say about the virtual memory runtime services:
"This section contains function definitions for the virtual memory
support that may be optionally used by an operating system at runtime.
If an operating system chooses to make EFI runtime service calls in a
virtual addressing mode instead of the flat physical mode, then the
operating system must use the services in this section to switch the
EFI runtime services from flat physical addressing to virtual
addressing."
So it is pretty clear that calling SetVirtualAddressMap() is entirely
optional, and so there is no point in doing so unless it achieves
anything useful for us.
This is not the case for 64-bit ARM. The identity mapping used by the
firmware is arbitrarily converted into another permutation of userland
addresses (i.e., bits [63:48] cleared), and the runtime code could easily
deal with the original layout in exactly the same way as it deals with
the converted layout. However, due to constraints related to page size
differences if the OS is not running with 4k pages, and related to
systems that may expose the individual sections of PE/COFF runtime
modules as different memory regions, creating the virtual layout is a
bit fiddly, and requires us to sort the memory map and reason about
adjacent regions with identical memory types etc etc.
So the obvious fix is to stop calling SetVirtualAddressMap() altogether
on arm64 systems. However, to avoid surprises, which are notoriously
hard to diagnose when it comes to OS<->firmware interactions, let's
start by making it an opt-out feature, and implement support for the
'efi=novamap' kernel command line parameter on ARM and arm64 systems.
( Note that 32-bit ARM generally does require SetVirtualAddressMap() to be
used, given that the physical memory map and the kernel virtual address
map are not guaranteed to be non-overlapping like on arm64. However,
having support for efi=novamap,noruntime on 32-bit ARM, combined with
the recently proposed support for earlycon=efifb, is likely to be useful
to diagnose boot issues on such systems if they have no accessible serial
port. )
Tested-by: Jeffrey Hugo <jhugo@codeaurora.org>
Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tested-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: AKASHI Takahiro <takahiro.akashi@linaro.org>
Cc: Alexander Graf <agraf@suse.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Peter Jones <pjones@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20190202094119.13230-8-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Replace all GPL license blurbs with an equivalent SPDX header (most
files are GPLv2, some are GPLv2+). While at it, drop some outdated
header changelogs as well.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: AKASHI Takahiro <takahiro.akashi@linaro.org>
Cc: Alexander Graf <agraf@suse.de>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
Cc: Jeffrey Hugo <jhugo@codeaurora.org>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Peter Jones <pjones@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20190202094119.13230-7-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Apply a number of cleanups:
- Introduce fdt_setprop_*var() helper macros to simplify and shorten repetitive
sequences - this also makes it less likely that the wrong variable size is
passed in. This change makes a lot of the property-setting calls single-line
and easier to read.
- Harmonize comment style: capitalization, punctuation, whitespaces, etc.
- Fix some whitespace noise in the libstub Makefile which I happened to notice.
- Use the standard tabular initialization style:
- map.map = &runtime_map;
- map.map_size = &map_size;
- map.desc_size = &desc_size;
- map.desc_ver = &desc_ver;
- map.key_ptr = &mmap_key;
- map.buff_size = &buff_size;
+ map.map = &runtime_map;
+ map.map_size = &map_size;
+ map.desc_size = &desc_size;
+ map.desc_ver = &desc_ver;
+ map.key_ptr = &mmap_key;
+ map.buff_size = &buff_size;
- Use tabular structure definition for better readability.
- Make all pr*() lines single-line, even if they marginally exceed 80 cols - this
makes them visually less intrusive.
- Unbreak line breaks into single lines when the length exceeds 80 cols only
marginally, for better readability.
- Move assignment closer to the actual usage site.
- Plus some other smaller cleanups, spelling fixes, etc.
No change in functionality intended.
[ ardb: move changes to upstream libfdt into local header. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: AKASHI Takahiro <takahiro.akashi@linaro.org>
Cc: Alexander Graf <agraf@suse.de>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
Cc: Jeffrey Hugo <jhugo@codeaurora.org>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Peter Jones <pjones@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20190202094119.13230-6-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The EFI memory attributes code cross-references the EFI memory map with
the more granular EFI memory attributes table to ensure that they are in
sync before applying the strict permissions to the regions it describes.
Since we always install virtual mappings for the EFI runtime regions to
which these strict permissions apply, we currently perform a sanity check
on the EFI memory descriptor, and ensure that the EFI_MEMORY_RUNTIME bit
is set, and that the virtual address has been assigned.
However, in cases where a runtime region exists at physical address 0x0,
and the virtual mapping equals the physical mapping, e.g., when running
in mixed mode on x86, we encounter a memory descriptor with the runtime
attribute and virtual address 0x0, and incorrectly draw the conclusion
that a runtime region exists for which no virtual mapping was installed,
and give up altogether. The consequence of this is that firmware mappings
retain their read-write-execute permissions, making the system more
vulnerable to attacks.
So let's only bail if the virtual address of 0x0 has been assigned to a
physical region that does not reside at address 0x0.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Cc: AKASHI Takahiro <takahiro.akashi@linaro.org>
Cc: Alexander Graf <agraf@suse.de>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
Cc: Jeffrey Hugo <jhugo@codeaurora.org>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Peter Jones <pjones@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Fixes: 10f0d2f577 ("efi: Implement generic support for the Memory ...")
Link: http://lkml.kernel.org/r/20190202094119.13230-4-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This does not build yet ...
Cc: Richard Gong <richard.gong@intel.com>
Fixes: 095ff29d2b ("firmware: intel_stratix10_service: add hardware dependency")
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a Kconfig dependency to ensure Intel Stratix10 service layer driver
can be built only on the platform that supports it.
Signed-off-by: Richard Gong <richard.gong@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code.
Reviewed-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
The device/driver model clearly mandates that bus driver that discover
and allocate the device must set the release callback. This callback
will be used to free the device after all references have gone away.
scmi bus driver is missing the obvious callback which will result in
the following warning if the device is unregistered:
Device 'scmi_dev.1' does not have a release() function, it is broken and
must be fixed. See Documentation/kobject.txt.
WARNING at drivers/base/core.c:922 device_release+0x8c/0xa0
Hardware name: ARM LTD Juno Development Platform BIOS EDK II Jan 21 2019
Workqueue: events deferred_probe_work_func
pstate: 60000005 (nZCv daif -PAN -UAO)
pc : device_release+0x8c/0xa0
lr : device_release+0x8c/0xa0
Call trace:
device_release+0x8c/0xa0
kobject_put+0x8c/0x208
device_unregister+0x30/0x78
scmi_device_destroy+0x28/0x50
scmi_probe+0x354/0x5b0
platform_drv_probe+0x58/0xa8
really_probe+0x2c4/0x3e8
driver_probe_device+0x12c/0x148
__device_attach_driver+0xac/0x150
bus_for_each_drv+0x78/0xd8
__device_attach+0xe0/0x168
device_initial_probe+0x24/0x30
bus_probe_device+0xa0/0xa8
deferred_probe_work_func+0x8c/0xe0
process_one_work+0x1f0/0x478
worker_thread+0x22c/0x450
kthread+0x134/0x138
ret_from_fork+0x10/0x1c
---[ end trace 420bdb7f6af50937 ]---
Fix the issue by providing scmi_device_release callback. We have
everything required for device release already in scmi_device_destroy,
so we just need to move freeing of the device to scmi_device_release.
Fixes: 933c504424 ("firmware: arm_scmi: add scmi protocol bus to enumerate protocol devices")
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Cc: stable@vger.kernel.org # 4.17+
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This Patch Adds reset API's to support release, assert
and status functionalities by using firmware interface.
Signed-off-by: Nava kishore Manne <nava.manne@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
This patch adds driver for Tegra210 BPMP firmware.
The BPMP is a specific processor in Tegra210 chip, which runs firmware
for assisting in entering deep low power states (suspend to ram), and
offloading DRAM memory clock scaling on some platforms.
Based on work by Sivaram Nair <sivaramn@nvidia.com>
Signed-off-by: Timo Alho <talho@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Split BPMP driver into common and chip specific parts to facilitate
adding support for previous and future Tegra chips that are using BPMP
as co-processor.
Signed-off-by: Timo Alho <talho@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
As a preparatory change to refactor BPMP driver to support other than
Tegra186 and Tegra194 chip generations, reword and slightly refactor
some of the functions to better match with what is actually happening
in the wire-level protocol.
The communication with BPMP is essentially a Remote Procedure Call
consisting of "request" and "response". Either side (BPMP or CPU) can
initiate the communication. The state machine for communication
consists of following steps (from Linux point of view):
Linux initiating the call:
1) check that channel is free to transmit a request
(is_request_channel_free)
2) copy request message payload to shared location
3) post the request in channel (post_request)
4) notify BPMP that channel state has been updated (ring_doorbell)
5) wait for response (is_response_ready)
6) copy response message payload from shared location
7) acknowledge the response in channel (ack_response)
BPMP initiating the call:
1) wait for request (is_request_ready)
2) copy request message payload from shared location
3) acknowledge the request in channel (ack_request)
4) check that channel is free to transmit response
(is_response_channel_free)
5) copy response message payload to shared location
6) post the response message to channel (post_response)
7) notify BPMP that channel state has been updated (ring_doorbell)
Signed-off-by: Timo Alho <talho@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
SCU power domain can be used in the same way by IMX8QXP and IMX8QM SoCs.
Make the driver support the fallback compatible string "fsl,scu-pd" to
allow other SoCs to reuse the common part.
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Kevin Hilman <khilman@kernel.org>
Cc: linux-pm@vger.kernel.org
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The firmware-owned GPIO expander on RPi 3 B+ must be in same state
after a reboot as initial power on. Otherwise this would cause a
network boot failure of the BOOTROM. So inform the VC4 firmware to restore
the expander before doing a reboot.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Tested-by: Phil Elwell <phil@raspberrypi.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
- Prevent KASLR from mapping the top page of the virtual address space
- Fix device-tree probing of SDEI driver
- Fix incorrect register offset definition in Hisilicon DDRC PMU driver
- Fix compilation issue with older binutils not liking unsigned immediates
- Fix uapi headers so that libc can provide its own sigcontext definition
- Fix handling of private compat syscalls
- Hook up compat io_pgetevents() syscall for 32-bit tasks
- Cleanup to arm64 Makefile (including now to avoid silly conflicts)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABCgAGBQJcL3d+AAoJELescNyEwWM0PNcIAIdjWQeBQYMBc8C/A2dBqL2s
tWBI+ormmZO72eAOVuGr1ZBqPhIpqXPQQquchnPDEzL+vZiq5Y6HP6ND8a+ISN2c
0NmWH2aURR+SZG5Mfpa9PffUlDu1LVbssbzt3Vk89BmOEFwBbr5w9FEO96c8drJC
MJ5NICtHnTvuI9jRs9zQoJOk+LKAL1Ei3v7EEyJGKVlRahtaYGZIkfx9t1BmFXzB
SFCA7Zf8kHQItKAwfGWsocd7CP7hQZcmpFcn/GfjXML2FQ+sa9Slys+u+8mvSziQ
EiU5os5krKPUpXXmyOeWXzEukZSJMRm2f9FBR2YquYm5RJ7Y0xQH1pB4aLsCR0g=
=LvTk
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"I'm safely chained back up to my desk, so please pull these arm64
fixes for -rc1 that address some issues that cropped up during the
merge window:
- Prevent KASLR from mapping the top page of the virtual address
space
- Fix device-tree probing of SDEI driver
- Fix incorrect register offset definition in Hisilicon DDRC PMU
driver
- Fix compilation issue with older binutils not liking unsigned
immediates
- Fix uapi headers so that libc can provide its own sigcontext
definition
- Fix handling of private compat syscalls
- Hook up compat io_pgetevents() syscall for 32-bit tasks
- Cleanup to arm64 Makefile (including now to avoid silly conflicts)"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: compat: Hook up io_pgetevents() for 32-bit tasks
arm64: compat: Don't pull syscall number from regs in arm_compat_syscall
arm64: compat: Avoid sending SIGILL for unallocated syscall numbers
arm64/sve: Disentangle <uapi/asm/ptrace.h> from <uapi/asm/sigcontext.h>
arm64/sve: ptrace: Fix SVE_PT_REGS_OFFSET definition
drivers/perf: hisi: Fixup one DDRC PMU register offset
arm64: replace arm64-obj-* in Makefile with obj-*
arm64: kaslr: Reserve size of ARM64_MEMSTART_ALIGN in linear region
firmware: arm_sdei: Fix DT platform device creation
firmware: arm_sdei: fix wrong of_node_put() in init function
arm64: entry: remove unused register aliases
arm64: smp: Fix compilation error
Merge more updates from Andrew Morton:
- procfs updates
- various misc bits
- lib/ updates
- epoll updates
- autofs
- fatfs
- a few more MM bits
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (58 commits)
mm/page_io.c: fix polled swap page in
checkpatch: add Co-developed-by to signature tags
docs: fix Co-Developed-by docs
drivers/base/platform.c: kmemleak ignore a known leak
fs: don't open code lru_to_page()
fs/: remove caller signal_pending branch predictions
mm/: remove caller signal_pending branch predictions
arch/arc/mm/fault.c: remove caller signal_pending_branch predictions
kernel/sched/: remove caller signal_pending branch predictions
kernel/locking/mutex.c: remove caller signal_pending branch predictions
mm: select HAVE_MOVE_PMD on x86 for faster mremap
mm: speed up mremap by 20x on large regions
mm: treewide: remove unused address argument from pte_alloc functions
initramfs: cleanup incomplete rootfs
scripts/gdb: fix lx-version string output
kernel/kcov.c: mark write_comp_data() as notrace
kernel/sysctl: add panic_print into sysctl
panic: add options to print system info when panic happens
bfs: extra sanity checking and static inode bitmap
exec: separate MM_ANONPAGES and RLIMIT_STACK accounting
...
memblock_alloc() never returns NULL because panic never returns.
Link: http://lkml.kernel.org/r/1545640882-42009-1-git-send-email-huang.zijiang@zte.com.cn
Signed-off-by: huang.zijiang <huang.zijiang@zte.com.cn>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Yi Wang <wang.yi59@zte.com.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Nobody has actually used the type (VERIFY_READ vs VERIFY_WRITE) argument
of the user address range verification function since we got rid of the
old racy i386-only code to walk page tables by hand.
It existed because the original 80386 would not honor the write protect
bit when in kernel mode, so you had to do COW by hand before doing any
user access. But we haven't supported that in a long time, and these
days the 'type' argument is a purely historical artifact.
A discussion about extending 'user_access_begin()' to do the range
checking resulted this patch, because there is no way we're going to
move the old VERIFY_xyz interface to that model. And it's best done at
the end of the merge window when I've done most of my merges, so let's
just get this done once and for all.
This patch was mostly done with a sed-script, with manual fix-ups for
the cases that weren't of the trivial 'access_ok(VERIFY_xyz' form.
There were a couple of notable cases:
- csky still had the old "verify_area()" name as an alias.
- the iter_iov code had magical hardcoded knowledge of the actual
values of VERIFY_{READ,WRITE} (not that they mattered, since nothing
really used it)
- microblaze used the type argument for a debug printout
but other than those oddities this should be a total no-op patch.
I tried to fix up all architectures, did fairly extensive grepping for
access_ok() uses, and the changes are trivial, but I may have missed
something. Any missed conversion should be trivially fixable, though.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It turns out the dt-probing part of this wasn't tested properly after it
was merged. commit 3aa0582fdb ("of: platform: populate /firmware/ node
from of_platform_default_populate_init()") changed the core-code to
generate the platform devices, meaning the driver's attempt fails, and it
bails out.
Fix this by removing the manual platform-device creation for DT systems,
core code has always done this for us.
CC: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
After finding a "firmware" dt node arm_sdei tries to match it's
compatible string with it. To do so it's calling of_find_matching_node()
which already takes care of decreasing the refcount on the "firmware"
node. We are then incorrectly decreasing the refcount on that node
again.
This patch removes the unwarranted call to of_node_put().
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Misc driver updates for platforms, many of them power related.
- Rockchip adds power domain support for rk3066 and rk3188
- Amlogic adds a power measurement driver
- Allwinner adds SRAM support for three platforms (F1C100, H5, A64 C1)
- Wakeup and ti-sysc (platform bus) fixes for OMAP/DRA7
- Broadcom fixes suspend/resume with Thumb2 kernels, and improves
stability of a handful of firmware/platform interfaces
- PXA completes their conversion to dmaengine framework
- Renesas does a bunch of PM cleanups across many platforms
- Tegra adds support for suspend/resume on T186/T194, which includes
some driver cleanups and addition of wake events
- Tegra also adds a driver for memory controller (EMC) on Tegra2
- i.MX tweaks power domain bindings, and adds support for i.MX8MQ in GPC
- Atmel adds identifiers and LPDDR2 support for a new SoC, SAM9X60
+ misc cleanups across several platforms
-----BEGIN PGP SIGNATURE-----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=yEX2
-----END PGP SIGNATURE-----
Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC driver updates from Olof Johansson:
"Misc driver updates for platforms, many of them power related.
- Rockchip adds power domain support for rk3066 and rk3188
- Amlogic adds a power measurement driver
- Allwinner adds SRAM support for three platforms (F1C100, H5, A64
C1)
- Wakeup and ti-sysc (platform bus) fixes for OMAP/DRA7
- Broadcom fixes suspend/resume with Thumb2 kernels, and improves
stability of a handful of firmware/platform interfaces
- PXA completes their conversion to dmaengine framework
- Renesas does a bunch of PM cleanups across many platforms
- Tegra adds support for suspend/resume on T186/T194, which includes
some driver cleanups and addition of wake events
- Tegra also adds a driver for memory controller (EMC) on Tegra2
- i.MX tweaks power domain bindings, and adds support for i.MX8MQ in
GPC
- Atmel adds identifiers and LPDDR2 support for a new SoC, SAM9X60
and misc cleanups across several platforms"
* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (73 commits)
ARM: at91: add support in soc driver for new SAM9X60
ARM: at91: add support in soc driver for LPDDR2 SiP
memory: omap-gpmc: Use of_node_name_eq for node name comparisons
bus: ti-sysc: Check for no-reset and no-idle flags at the child level
ARM: OMAP2+: Check also the first dts child for hwmod flags
soc: amlogic: meson-clk-measure: Add missing REGMAP_MMIO dependency
soc: imx: gpc: Increase GPC_CLK_MAX to 7
soc: renesas: rcar-sysc: Fix power domain control after system resume
soc: renesas: rcar-sysc: Merge PM Domain registration and linking
soc: renesas: rcar-sysc: Remove rcar_sysc_power_{down,up}() helpers
soc: renesas: r8a77990-sysc: Fix initialization order of 3DG-{A,B}
dt-bindings: sram: sunxi: Add compatible for the A64 SRAM C1
dt-bindings: sram: sunxi: Add bindings for the H5 with SRAM C1
dt-bindings: sram: Add Allwinner suniv F1C100s
soc: sunxi: sram: Add support for the H5 SoC system control
soc: sunxi: sram: Enable EMAC clock access for H3 variant
soc: imx: gpcv2: add support for i.MX8MQ SoC
soc: imx: gpcv2: move register access table to domain data
soc: imx: gpcv2: prefix i.MX7 specific defines
dmaengine: pxa: make the filter function internal
...
Here is the big set of char and misc driver patches for 4.21-rc1.
Lots of different types of driver things in here, as this tree seems to
be the "collection of various driver subsystems not big enough to have
their own git tree" lately.
Anyway, some highlights of the changes in here:
- binderfs: is it a rule that all driver subsystems will eventually
grow to have their own filesystem? Binder now has one to handle the
use of it in containerized systems. This was discussed at the
Plumbers conference a few months ago and knocked into mergable shape
very fast by Christian Brauner. Who also has signed up to be
another binder maintainer, showing a distinct lack of good judgement :)
- binder updates and fixes
- mei driver updates
- fpga driver updates and additions
- thunderbolt driver updates
- soundwire driver updates
- extcon driver updates
- nvmem driver updates
- hyper-v driver updates
- coresight driver updates
- pvpanic driver additions and reworking for more device support
- lp driver updates. Yes really, it's _finally_ moved to the proper
parallal port driver model, something I never thought I would see
happen. Good stuff.
- other tiny driver updates and fixes.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXCZCUA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymF9QCgx/Z8Fj1qzGVGrIE4flXOi7pxOrgAoMqJEWtU
ywwL8M9suKDz7cZT9fWQ
=xxr6
-----END PGP SIGNATURE-----
Merge tag 'char-misc-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the big set of char and misc driver patches for 4.21-rc1.
Lots of different types of driver things in here, as this tree seems
to be the "collection of various driver subsystems not big enough to
have their own git tree" lately.
Anyway, some highlights of the changes in here:
- binderfs: is it a rule that all driver subsystems will eventually
grow to have their own filesystem? Binder now has one to handle the
use of it in containerized systems.
This was discussed at the Plumbers conference a few months ago and
knocked into mergable shape very fast by Christian Brauner. Who
also has signed up to be another binder maintainer, showing a
distinct lack of good judgement :)
- binder updates and fixes
- mei driver updates
- fpga driver updates and additions
- thunderbolt driver updates
- soundwire driver updates
- extcon driver updates
- nvmem driver updates
- hyper-v driver updates
- coresight driver updates
- pvpanic driver additions and reworking for more device support
- lp driver updates. Yes really, it's _finally_ moved to the proper
parallal port driver model, something I never thought I would see
happen. Good stuff.
- other tiny driver updates and fixes.
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (116 commits)
MAINTAINERS: add another Android binder maintainer
intel_th: msu: Fix an off-by-one in attribute store
stm class: Add a reference to the SyS-T document
stm class: Fix a module refcount leak in policy creation error path
char: lp: use new parport device model
char: lp: properly count the lp devices
char: lp: use first unused lp number while registering
char: lp: detach the device when parallel port is removed
char: lp: introduce list to save port number
bus: qcom: remove duplicated include from qcom-ebi2.c
VMCI: Use memdup_user() rather than duplicating its implementation
char/rtc: Use of_node_name_eq for node name comparisons
misc: mic: fix a DMA pool free failure
ptp: fix an IS_ERR() vs NULL check
genwqe: Fix size check
binder: implement binderfs
binder: fix use-after-free due to ksys_close() during fdget()
bus: fsl-mc: remove duplicated include files
bus: fsl-mc: explicitly define the fsl_mc_command endianness
misc: ti-st: make array read_ver_cmd static, shrinks object size
...
Pull EFI updates from Ingo Molnar:
"The main changes in this cycle were:
- Allocate the E820 buffer before doing the
GetMemoryMap/ExitBootServices dance so we don't run out of space
- Clear EFI boot services mappings when freeing the memory
- Harden efivars against callers that invoke it on non-EFI boots
- Reduce the number of memblock reservations resulting from extensive
use of the new efi_mem_reserve_persistent() API
- Other assorted fixes and cleanups"
* 'efi-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/efi: Don't unmap EFI boot services code/data regions for EFI_OLD_MEMMAP and EFI_MIXED_MODE
efi: Reduce the amount of memblock reservations for persistent allocations
efi: Permit multiple entries in persistent memreserve data structure
efi/libstub: Disable some warnings for x86{,_64}
x86/efi: Move efi_<reserve/free>_boot_services() to arch/x86
x86/efi: Unmap EFI boot services code/data regions from efi_pgd
x86/mm/pageattr: Introduce helper function to unmap EFI boot services
efi/fdt: Simplify the get_fdt() flow
efi/fdt: Indentation fix
firmware/efi: Add NULL pointer checks in efivars API functions
In the end, we ended up with quite a lot more than I expected:
- Support for ARMv8.3 Pointer Authentication in userspace (CRIU and
kernel-side support to come later)
- Support for per-thread stack canaries, pending an update to GCC that
is currently undergoing review
- Support for kexec_file_load(), which permits secure boot of a kexec
payload but also happens to improve the performance of kexec
dramatically because we can avoid the sucky purgatory code from
userspace. Kdump will come later (requires updates to libfdt).
- Optimisation of our dynamic CPU feature framework, so that all
detected features are enabled via a single stop_machine() invocation
- KPTI whitelisting of Cortex-A CPUs unaffected by Meltdown, so that
they can benefit from global TLB entries when KASLR is not in use
- 52-bit virtual addressing for userspace (kernel remains 48-bit)
- Patch in LSE atomics for per-cpu atomic operations
- Custom preempt.h implementation to avoid unconditional calls to
preempt_schedule() from preempt_enable()
- Support for the new 'SB' Speculation Barrier instruction
- Vectorised implementation of XOR checksumming and CRC32 optimisations
- Workaround for Cortex-A76 erratum #1165522
- Improved compatibility with Clang/LLD
- Support for TX2 system PMUS for profiling the L3 cache and DMC
- Reflect read-only permissions in the linear map by default
- Ensure MMIO reads are ordered with subsequent calls to Xdelay()
- Initial support for memory hotplug
- Tweak the threshold when we invalidate the TLB by-ASID, so that
mremap() performance is improved for ranges spanning multiple PMDs.
- Minor refactoring and cleanups
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABCgAGBQJcE4TmAAoJELescNyEwWM0Nr0H/iaU7/wQSzHyNXtZoImyKTul
Blu2ga4/EqUrTU7AVVfmkl/3NBILWlgQVpY6tH6EfXQuvnxqD7CizbHyLdyO+z0S
B5PsFUH2GLMNAi48AUNqGqkgb2knFbg+T+9IimijDBkKg1G/KhQnRg6bXX32mLJv
Une8oshUPBVJMsHN1AcQknzKariuoE3u0SgJ+eOZ9yA2ZwKxP4yy1SkDt3xQrtI0
lojeRjxcyjTP1oGRNZC+BWUtGOT35p7y6cGTnBd/4TlqBGz5wVAJUcdoxnZ6JYVR
O8+ob9zU+4I0+SKt80s7pTLqQiL9rxkKZ5joWK1pr1g9e0s5N5yoETXKFHgJYP8=
=sYdt
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 festive updates from Will Deacon:
"In the end, we ended up with quite a lot more than I expected:
- Support for ARMv8.3 Pointer Authentication in userspace (CRIU and
kernel-side support to come later)
- Support for per-thread stack canaries, pending an update to GCC
that is currently undergoing review
- Support for kexec_file_load(), which permits secure boot of a kexec
payload but also happens to improve the performance of kexec
dramatically because we can avoid the sucky purgatory code from
userspace. Kdump will come later (requires updates to libfdt).
- Optimisation of our dynamic CPU feature framework, so that all
detected features are enabled via a single stop_machine()
invocation
- KPTI whitelisting of Cortex-A CPUs unaffected by Meltdown, so that
they can benefit from global TLB entries when KASLR is not in use
- 52-bit virtual addressing for userspace (kernel remains 48-bit)
- Patch in LSE atomics for per-cpu atomic operations
- Custom preempt.h implementation to avoid unconditional calls to
preempt_schedule() from preempt_enable()
- Support for the new 'SB' Speculation Barrier instruction
- Vectorised implementation of XOR checksumming and CRC32
optimisations
- Workaround for Cortex-A76 erratum #1165522
- Improved compatibility with Clang/LLD
- Support for TX2 system PMUS for profiling the L3 cache and DMC
- Reflect read-only permissions in the linear map by default
- Ensure MMIO reads are ordered with subsequent calls to Xdelay()
- Initial support for memory hotplug
- Tweak the threshold when we invalidate the TLB by-ASID, so that
mremap() performance is improved for ranges spanning multiple PMDs.
- Minor refactoring and cleanups"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (125 commits)
arm64: kaslr: print PHYS_OFFSET in dump_kernel_offset()
arm64: sysreg: Use _BITUL() when defining register bits
arm64: cpufeature: Rework ptr auth hwcaps using multi_entry_cap_matches
arm64: cpufeature: Reduce number of pointer auth CPU caps from 6 to 4
arm64: docs: document pointer authentication
arm64: ptr auth: Move per-thread keys from thread_info to thread_struct
arm64: enable pointer authentication
arm64: add prctl control for resetting ptrauth keys
arm64: perf: strip PAC when unwinding userspace
arm64: expose user PAC bit positions via ptrace
arm64: add basic pointer authentication support
arm64/cpufeature: detect pointer authentication
arm64: Don't trap host pointer auth use to EL2
arm64/kvm: hide ptrauth from guests
arm64/kvm: consistently handle host HCR_EL2 flags
arm64: add pointer authentication register bits
arm64: add comments about EC exception levels
arm64: perf: Treat EXCLUDE_EL* bit definitions as unsigned
arm64: kpti: Whitelist Cortex-A CPUs that don't implement the CSV3 field
arm64: enable per-task stack canaries
...
- A series from Aisheng that improves SCU power domain bindings by
defining '#power-domain-cells' as 1, and adds i.MX8 SCU power domain
driver support on top of it.
- A series from Lucas that updates gpcv2 driver for scalability and
adds i.MX8MQ support into the driver.
- Increase gpc driver GPC_CLK_MAX definition to 7, as DISPLAY power
domain on imx6sx has 7 clocks.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJcDbkEAAoJEFBXWFqHsHzO1C4H/05Khi/tWF6xZNMw7C4Q6wf6
WIFhB73tTLxZ8W0n8gIS+Y2YKFw6+dy8J/ZpkFBpe+f6rqVsyTzUvGB+6Ii3Nomu
V2juCn8XaHfv32FfaPBCelnitcpgFrnEvXYS6u8mSEt1DSu8rK2y2yMcnrkdcurq
Jy9eAYjUrdXYGsH9uw36mco7q25I5wSnXOLzZ0SLXSqB//a9YlzPKGRmQqF0uQ3t
K8uT5PwqEBrjNAP6sTvSzMf6vSeXD5MGqrEvd/LnGp6IPwx7R+z4Y+HUw/RtTIdg
rP1hAt3PLDD7Ibk+GHH5q/M2+9fI2dn2y44JXGOlQvqdmoLVg1vCpTLEj8OioFU=
=/3Mg
-----END PGP SIGNATURE-----
Merge tag 'imx-drivers-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/drivers
i.MX drivers change for 4.21:
- A series from Aisheng that improves SCU power domain bindings by
defining '#power-domain-cells' as 1, and adds i.MX8 SCU power domain
driver support on top of it.
- A series from Lucas that updates gpcv2 driver for scalability and
adds i.MX8MQ support into the driver.
- Increase gpc driver GPC_CLK_MAX definition to 7, as DISPLAY power
domain on imx6sx has 7 clocks.
* tag 'imx-drivers-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
soc: imx: gpc: Increase GPC_CLK_MAX to 7
soc: imx: gpcv2: add support for i.MX8MQ SoC
soc: imx: gpcv2: move register access table to domain data
soc: imx: gpcv2: prefix i.MX7 specific defines
firmware: imx: add SCU power domain driver
firmware: imx: add pm svc headfile
dt-bindings: fsl: scu: update power domain binding
firmware: imx: remove resource id enums
dt-bindings: imx: add scu resource id headfile
Signed-off-by: Olof Johansson <olof@lixom.net>
These changes update the BPMP ABI header and implement a new variant of
the BPMP firmware version tag query if supported.
-----BEGIN PGP SIGNATURE-----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=hyDw
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-4.21-firmware' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/drivers
firmware: tegra: Changes for v4.21-rc1
These changes update the BPMP ABI header and implement a new variant of
the BPMP firmware version tag query if supported.
* tag 'tegra-for-4.21-firmware' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
firmware: tegra: Use in-band messages for firmware version query
soc/tegra: bpmp: Update ABI header
firmware: tegra: Print version tag at full
firmware: tegra: Switch to global mrq_is_supported()
firmware: tegra: Add helper to check for supported MRQs
Signed-off-by: Olof Johansson <olof@lixom.net>
We wish to introduce a 52-bit virtual address space for userspace but
maintain compatibility with software that assumes the maximum VA space
size is 48 bit.
In order to achieve this, on 52-bit VA systems, we make mmap behave as
if it were running on a 48-bit VA system (unless userspace explicitly
requests a VA where addr[51:48] != 0).
On a system running a 52-bit userspace we need TASK_SIZE to represent
the 52-bit limit as it is used in various places to distinguish between
kernelspace and userspace addresses.
Thus we need a new limit for mmap, stack, ELF loader and EFI (which uses
TTBR0) to represent the non-extended VA space.
This patch introduces DEFAULT_MAP_WINDOW and DEFAULT_MAP_WINDOW_64 and
switches the appropriate logic to use that instead of TASK_SIZE.
Signed-off-by: Steve Capper <steve.capper@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
After finding a "firmware" dt node stratix10 tries to match it's
compatible string with it. To do so it's calling of_find_matching_node()
which already takes care of decreasing the refcount on the "firmware"
node. We are then incorrectly decreasing the refcount on that node
again.
This patch removes the unwarranted call to of_node_put().
Fixes: 7ca5ce8965 ("firmware: add Intel Stratix10 service layer driver")
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Instead of running with interrupts disabled, use a semaphore. This should
make it easier for backends that may need to sleep (e.g. EFI) when
performing a write:
|BUG: sleeping function called from invalid context at kernel/sched/completion.c:99
|in_atomic(): 1, irqs_disabled(): 1, pid: 2236, name: sig-xstate-bum
|Preemption disabled at:
|[<ffffffff99d60512>] pstore_dump+0x72/0x330
|CPU: 26 PID: 2236 Comm: sig-xstate-bum Tainted: G D 4.20.0-rc3 #45
|Call Trace:
| dump_stack+0x4f/0x6a
| ___might_sleep.cold.91+0xd3/0xe4
| __might_sleep+0x50/0x90
| wait_for_completion+0x32/0x130
| virt_efi_query_variable_info+0x14e/0x160
| efi_query_variable_store+0x51/0x1a0
| efivar_entry_set_safe+0xa3/0x1b0
| efi_pstore_write+0x109/0x140
| pstore_dump+0x11c/0x330
| kmsg_dump+0xa4/0xd0
| oops_exit+0x22/0x30
...
Reported-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Fixes: 21b3ddd39f ("efi: Don't use spinlocks for efi vars")
Signed-off-by: Kees Cook <keescook@chromium.org>
The current implementation of efi_mem_reserve_persistent() is rather
naive, in the sense that for each invocation, it creates a separate
linked list entry to describe the reservation. Since the linked list
entries themselves need to persist across subsequent kexec reboots,
every reservation created this way results in two memblock_reserve()
calls at the next boot.
On arm64 systems with 100s of CPUs, this may result in a excessive
number of memblock reservations, and needless fragmentation.
So instead, make use of the newly updated struct linux_efi_memreserve
layout to put multiple reservations into a single linked list entry.
This should get rid of the numerous tiny memblock reservations, and
effectively cut the total number of reservations in half on arm64
systems with many CPUs.
[ mingo: build warning fix. ]
Tested-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arend van Spriel <arend.vanspriel@broadcom.com>
Cc: Bhupesh Sharma <bhsharma@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Eric Snowberg <eric.snowberg@oracle.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Joe Perches <joe@perches.com>
Cc: Jon Hunter <jonathanh@nvidia.com>
Cc: Julien Thierry <julien.thierry@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Nathan Chancellor <natechancellor@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Cc: Sedat Dilek <sedat.dilek@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: YiFei Zhu <zhuyifei1999@gmail.com>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20181129171230.18699-11-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
In preparation of updating efi_mem_reserve_persistent() to cause less
fragmentation when dealing with many persistent reservations, update
the struct definition and the code that handles it currently so it
can describe an arbitrary number of reservations using a single linked
list entry. The actual optimization will be implemented in a subsequent
patch.
Tested-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arend van Spriel <arend.vanspriel@broadcom.com>
Cc: Bhupesh Sharma <bhsharma@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Eric Snowberg <eric.snowberg@oracle.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Joe Perches <joe@perches.com>
Cc: Jon Hunter <jonathanh@nvidia.com>
Cc: Julien Thierry <julien.thierry@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Nathan Chancellor <natechancellor@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Cc: Sedat Dilek <sedat.dilek@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: YiFei Zhu <zhuyifei1999@gmail.com>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20181129171230.18699-10-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When building the kernel with Clang, some disabled warnings appear
because this Makefile overrides KBUILD_CFLAGS for x86{,_64}. Add them to
this list so that the build is clean again.
-Wpointer-sign was disabled for the whole kernel before the beginning of Git history.
-Waddress-of-packed-member was disabled for the whole kernel and for
the early boot code in these commits:
bfb38988c5 ("kbuild: clang: Disable 'address-of-packed-member' warning")
20c6c18904 ("x86/boot: Disable the address-of-packed-member compiler warning").
-Wgnu was disabled for the whole kernel and for the early boot code in
these commits:
61163efae0 ("kbuild: LLVMLinux: Add Kbuild support for building kernel with Clang")
6c3b56b197 ("x86/boot: Disable Clang warnings about GNU extensions").
[ mingo: Made the changelog more readable. ]
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Sedat Dilek <sedat.dilek@gmail.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arend van Spriel <arend.vanspriel@broadcom.com>
Cc: Bhupesh Sharma <bhsharma@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Eric Snowberg <eric.snowberg@oracle.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Joe Perches <joe@perches.com>
Cc: Jon Hunter <jonathanh@nvidia.com>
Cc: Julien Thierry <julien.thierry@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: YiFei Zhu <zhuyifei1999@gmail.com>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20181129171230.18699-8-ard.biesheuvel@linaro.org
Link: https://github.com/ClangBuiltLinux/linux/issues/112
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reorganize the get_fdt() lookup loop, clearly showing that:
- Nothing is done for table entries that do not have fdt_guid
- Once an entry with fdt_guid is found, break out of the loop
No functional changes.
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Julien Thierry <julien.thierry@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arend van Spriel <arend.vanspriel@broadcom.com>
Cc: Bhupesh Sharma <bhsharma@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Eric Snowberg <eric.snowberg@oracle.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Jon Hunter <jonathanh@nvidia.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Nathan Chancellor <natechancellor@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Cc: Sedat Dilek <sedat.dilek@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: YiFei Zhu <zhuyifei1999@gmail.com>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20181129171230.18699-4-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Closing bracket seems to end a for statement when it is actually ending
the contained if. Add some brackets to have clear delimitation of each
scope.
No functional change/fix, just fix the indentation.
Signed-off-by: Julien Thierry <julien.thierry@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arend van Spriel <arend.vanspriel@broadcom.com>
Cc: Bhupesh Sharma <bhsharma@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Eric Snowberg <eric.snowberg@oracle.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Joe Perches <joe@perches.com>
Cc: Jon Hunter <jonathanh@nvidia.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Nathan Chancellor <natechancellor@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Cc: Sedat Dilek <sedat.dilek@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: YiFei Zhu <zhuyifei1999@gmail.com>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20181129171230.18699-3-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Since commit:
ce2e6db554 ("brcmfmac: Add support for getting nvram contents from EFI variables")
we have a device driver accessing the efivars API. Several functions in
the efivars API assume __efivars is set, i.e., that they will be accessed
only after efivars_register() has been called. However, the following NULL
pointer access was reported calling efivar_entry_size() from the brcmfmac
device driver:
Unable to handle kernel NULL pointer dereference at virtual address 00000008
pgd = 60bfa5f1
[00000008] *pgd=00000000
Internal error: Oops: 5 [#1] SMP ARM
...
Hardware name: NVIDIA Tegra SoC (Flattened Device Tree)
Workqueue: events request_firmware_work_func
PC is at efivar_entry_size+0x28/0x90
LR is at brcmf_fw_complete_request+0x3f8/0x8d4 [brcmfmac]
pc : [<c0c40718>] lr : [<bf2a3ef4>] psr: a00d0113
sp : ede7fe28 ip : ee983410 fp : c1787f30
r10: 00000000 r9 : 00000000 r8 : bf2b2258
r7 : ee983000 r6 : c1604c48 r5 : ede7fe88 r4 : edf337c0
r3 : 00000000 r2 : 00000000 r1 : ede7fe88 r0 : c17712c8
Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none
Control: 10c5387d Table: ad16804a DAC: 00000051
Disassembly showed that the local static variable __efivars is NULL,
which is not entirely unexpected given that it is a non-EFI platform.
So add a NULL pointer check to efivar_entry_size(), and to related
functions while at it. In efivars_register() a couple of sanity checks
are added as well.
Reported-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Bhupesh Sharma <bhsharma@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Eric Snowberg <eric.snowberg@oracle.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Joe Perches <joe@perches.com>
Cc: Julien Thierry <julien.thierry@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Nathan Chancellor <natechancellor@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Cc: Sedat Dilek <sedat.dilek@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: YiFei Zhu <zhuyifei1999@gmail.com>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20181129171230.18699-9-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Mapping the MEMRESERVE EFI configuration table from an early initcall
is too late: the GICv3 ITS code that creates persistent reservations
for the boot CPU's LPI tables is invoked from init_IRQ(), which runs
much earlier than the handling of the initcalls. This results in a
WARN() splat because the LPI tables cannot be reserved persistently,
which will result in silent memory corruption after a kexec reboot.
So instead, invoke the initialization performed by the initcall from
efi_mem_reserve_persistent() itself as well, but keep the initcall so
that the init is guaranteed to have been called before SMP boot.
Tested-by: Marc Zyngier <marc.zyngier@arm.com>
Tested-by: Jan Glauber <jglauber@cavium.com>
Tested-by: John Garry <john.garry@huawei.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Fixes: 63eb322d89 ("efi: Permit calling efi_mem_reserve_persistent() ...")
Link: http://lkml.kernel.org/r/20181123215132.7951-2-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Extend Intel Stratix10 service layer to support the second service layer
client, Remote Status Update (RSU).
RSU is used to provide our customers with protection against loading bad
bitstreams onto their devices when those devices are booting from flash.
Signed-off-by: Richard Gong <richard.gong@intel.com>
Signed-off-by: Alan Tull <atull@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some features of the Intel Stratix10 SoC require a level of privilege
higher than the kernel is granted. Such secure features include
FPGA programming. In terms of the ARMv8 architecture, the kernel runs
at Exception Level 1 (EL1), access to the features requires
Exception Level 3 (EL3).
The Intel Stratix10 SoC service layer provides an in kernel API for
drivers to request access to the secure features. The requests are queued
and processed one by one. ARM’s SMCCC is used to pass the execution
of the requests on to a secure monitor (EL3).
The header file stratix10-sve-client.h defines the interface between
service providers (FPGA manager is one of them) and service layer.
The header file stratix10-smc.h defines the secure monitor call (SMC)
message protocols used for service layer driver in normal world
(EL1) to communicate with secure monitor SW in secure monitor exception
level 3 (EL3).
Signed-off-by: Richard Gong <richard.gong@intel.com>
Signed-off-by: Alan Tull <atull@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Adopt the SPDX license identifier headers to ease license compliance
management.
Cc: Eric Anholt <eric@anholt.net>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Commit a1547e0bca ("firmware: raspberrypi: Remove VLA usage")
moved away from VLA's to a fixed maximum size for mailbox data.
However, some mailbox calls use larger data buffers
than the maximum allowed in that change. This fix therefor
moves from using fixed buffers to kmalloc to ensure all sizes
are catered for.
There is some documentation, which is somewhat out of date,
on the mailbox calls here :
https://github.com/raspberrypi/firmware/wiki/Mailbox-property-interface
Fixes: a1547e0bca ("firmware: raspberrypi: Remove VLA usage")
Signed-off-by: James Hughes <james.hughes@raspberrypi.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Currently, efi_mem_reserve_persistent() may not be called from atomic
context, since both the kmalloc() call and the memremap() call may
sleep.
The kmalloc() call is easy enough to fix, but the memremap() call
needs to be moved into an init hook since we cannot control the
memory allocation behavior of memremap() at the call site.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20181114175544.12860-6-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The new memory EFI reservation feature we introduced to allow memory
reservations to persist across kexec may trigger an unbounded number
of calls to memblock_reserve(). The memblock subsystem can deal with
this fine, but not before memblock resizing is enabled, which we can
only do after paging_init(), when the memory we reallocate the array
into is actually mapped.
So break out the memreserve table processing into a separate routine
and call it after paging_init() on arm64. On ARM, because of limited
reviewing bandwidth of the maintainer, we cannot currently fix this,
so instead, disable the EFI persistent memreserve entirely on ARM so
we can fix it later.
Tested-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20181114175544.12860-5-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Commit:
24d7c494ce ("efi/arm-stub: Round up FDT allocation to mapping size")
increased the allocation size for the FDT image created by the stub to a
fixed value of 2 MB, to simplify the former code that made several
attempts with increasing values for the size. This is reasonable
given that the allocation is of type EFI_LOADER_DATA, which is released
to the kernel unless it is explicitly memblock_reserve()d by the early
boot code.
However, this allocation size leaked into the 'size' field of the FDT
header metadata, and so the entire allocation remains occupied by the
device tree binary, even if most of it is not used to store device tree
information.
So call fdt_pack() to shrink the FDT data structure to its minimum size
after populating all the fields, so that the remaining memory is no
longer wasted.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: <stable@vger.kernel.org> # v4.12+
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Fixes: 24d7c494ce ("efi/arm-stub: Round up FDT allocation to mapping size")
Link: http://lkml.kernel.org/r/20181114175544.12860-4-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Commit:
3ea86495ae ("efi/arm: preserve early mapping of UEFI memory map longer for BGRT")
deferred the unmap of the early mapping of the UEFI memory map to
accommodate the ACPI BGRT code, which looks up the memory type that
backs the BGRT table to validate it against the requirements of the UEFI spec.
Unfortunately, this causes problems on ARM, which does not permit
early mappings to persist after paging_init() is called, resulting
in a WARN() splat. Since we don't support the BGRT table on ARM anway,
let's revert ARM to the old behaviour, which is to take down the
early mapping at the end of efi_init().
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Fixes: 3ea86495ae ("efi/arm: preserve early mapping of UEFI memory ...")
Link: http://lkml.kernel.org/r/20181114175544.12860-3-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The following commit:
9dbbedaa61 ("efi: Make efi_rts_work accessible to efi page fault handler")
converted 'efi_rts_work' from an auto variable to a global variable.
However, when submitting the work, INIT_WORK_ONSTACK() was still used,
causing the following complaint from debugobjects:
ODEBUG: object 00000000ed27b500 is NOT on stack 00000000c7d38760, but annotated.
Change the macro to just INIT_WORK() to eliminate the warning.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Fixes: 9dbbedaa61 ("efi: Make efi_rts_work accessible to efi page fault handler")
Link: http://lkml.kernel.org/r/20181114175544.12860-2-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
We should never assume to get a reply from the firmware otherwise
the call could block forever and the user don't get informed. So
define a timeout of 1 sec and print a stacktrace once in the unlikely
case the timeout expired.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Some i.MX SoCs contain a system controller that is responsible for
controlling the state of the IPs that are present. Communication
between the host processor running an OS and the system controller
happens through a SCU protocol. This patch adds SCU protocol based
power domains drivers.
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Kevin Hilman <khilman@kernel.org>
Cc: linux-pm@vger.kernel.org
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add support for a new MRQ, that uses in-band messaging instead of IOVA
buffer, to retrieve the firmware version 'tag' during boot. If an
older firmware is used, that does not support the new MRQ, fall back
to the earlier implementation.
Signed-off-by: Timo Alho <talho@nvidia.com>
Acked-by: Sivaram Nair <sivaramn@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Last two characters of the version tag that is 32 bytes long were
stripped out.
Signed-off-by: Timo Alho <talho@nvidia.com>
Acked-by: Sivaram Nair <sivaramn@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Patch "firmware: tegra: add helper to check for supported MRQs" added
an API to check if MRQ is supported. Remove the implementation from
bpmp debugfs code in favor of that.
Signed-off-by: Timo Alho <talho@nvidia.com>
Acked-by: Sivaram Nair <sivaramn@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add a helper function to check that firmware is supporting a given MRQ
command.
Signed-off-by: Timo Alho <talho@nvidia.com>
Acked-by: Sivaram Nair <sivaramn@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Pull x86 fixes from Ingo Molnar:
"A number of fixes and some late updates:
- make in_compat_syscall() behavior on x86-32 similar to other
platforms, this touches a number of generic files but is not
intended to impact non-x86 platforms.
- objtool fixes
- PAT preemption fix
- paravirt fixes/cleanups
- cpufeatures updates for new instructions
- earlyprintk quirk
- make microcode version in sysfs world-readable (it is already
world-readable in procfs)
- minor cleanups and fixes"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
compat: Cleanup in_compat_syscall() callers
x86/compat: Adjust in_compat_syscall() to generic code under !COMPAT
objtool: Support GCC 9 cold subfunction naming scheme
x86/numa_emulation: Fix uniform-split numa emulation
x86/paravirt: Remove unused _paravirt_ident_32
x86/mm/pat: Disable preemption around __flush_tlb_all()
x86/paravirt: Remove GPL from pv_ops export
x86/traps: Use format string with panic() call
x86: Clean up 'sizeof x' => 'sizeof(x)'
x86/cpufeatures: Enumerate MOVDIR64B instruction
x86/cpufeatures: Enumerate MOVDIRI instruction
x86/earlyprintk: Add a force option for pciserial device
objtool: Support per-function rodata sections
x86/microcode: Make revision and processor flags world-readable
Move the Dell dcdbas and dell_rbu drivers into platform/drivers/x86 as
they are closely coupled with other drivers in this location.
Improve _init* usage for acerhdf and fix some usage issues with messages
and module parameters.
Simplify asus-wmi by calling ACPI/WMI methods directly, eliminating
workqueue overhead, eliminate double reporting of keyboard backlight.
Fix wake from USB failure on Bay Trail devices (intel_int0002_vgpio).
Notify intel_telemetry users when IPC1 device is not enabled.
Update various drivers with new laptop model IDs.
Update several intel drivers to use SPDX identifers and order headers
alphabetically.
The following is an automated git shortlog grouped by driver:
Add Intel AtomISP2 dummy / power-management driver:
- Add Intel AtomISP2 dummy / power-management driver
lg-laptop:
- Add LG Gram laptop special features driver
HID:
- asus: only support backlight when it's not driven by WMI
MAINTAINERS:
- intel_telemetry: Update maintainers info
- intel_pmc_core: Update MAINTAINERS
- Update maintainer for dcdbas and dell_rbu
- Use my infradead account exclusively for PDx86 work
acerhdf:
- restructure to allow large BIOS table be __initconst
- mark appropriate content with __init prefix
- Add BIOS entry for Gateway LT31 v1.3307
- Remove cut-and-paste trap from instructions
- Enable ability to list supported systems
- clarify modinfo messages for BIOS override
asus-wmi:
- export function for evaluating WMI methods
- Only notify kbd LED hw_change by fn-key pressed
- Simplify the keyboard brightness updating process
firmware:
- dcdbas: include linux/io.h
- dcdbas: Move dcdbas to drivers/platform/x86
- dell_rbu: Move dell_rbu to drivers/platform/x86
- dcdbas: Add support for WSMT ACPI table
- dell_rbu: Make payload memory uncachable
ideapad-laptop:
- Add Y530-15ICH to no_hw_rfkill
- Use __func__ instead of read_ec_cmd in pr_err
intel-hid:
- Convert to use SPDX identifier
intel-ips:
- Convert to use SPDX identifier
intel-rst:
- Convert to use SPDX identifier
- Sort headers alphabetically
intel-smartconnect:
- Convert to use SPDX identifier
- Sort headers alphabetically
intel-wmi-thunderbolt:
- Add dynamic debugging
- Convert to use SPDX identifier
intel_bxtwc_tmu:
- Convert to use SPDX identifier
intel_cht_int33fe:
- Convert to use SPDX identifier
intel_chtdc_ti_pwrbtn:
- Add SPDX identifier
intel_int0002_vgpio:
- Convert to use SPDX identifier
- Implement irq_set_wake
- Enable the driver on Bay Trail platforms
intel_menlow:
- Convert to use SPDX identifier
- Sort headers alphabetically
intel_mid_powerbtn:
- Convert to use SPDX identifier
- Remove unnecessary init.h inclusion
- Get rid of custom ICPU() macro
intel_mid_thermal:
- Convert to use SPDX identifier
- Sort headers alphabetically
intel_oaktrail:
- Convert to use SPDX identifier
- Sort headers alphabetically
intel_pmc:
- Convert to use SPDX identifier
- Sort headers alphabetically
intel_punit_ipc:
- Convert to use SPDX identifier
- Sort headers alphabetically
intel_scu_ipc:
- Convert to use SPDX identifier
- Sort headers alphabetically
intel_telemetry:
- Get rid of custom macro
- report debugfs failure
- Convert to use SPDX identifier
intel_turbo_max_3:
- Convert to use SPDX identifier
- Sort headers alphabetically
mlx-platform:
- Properly use mlxplat_mlxcpld_msn201x_items
touchscreen_dmi:
- Add min-x and min-y settings for various models
- Add info for the Onda V80 Plus v3 tablet
- Add info for the Trekstor Primetab T13B tablet
- Add info for the Trekstor Primebook C11 convertible
tracing:
- Trivia spelling fix containerof() -> container_of()
wmi:
- declare device_type structure as constant
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJb2mDCAAoJEKbMaAwKp364KdkH/Rar8cenw7uFeVzT5o4fGzTn
0Oo1Pnwh+hPgmQwmf8O/mHsa/1Zb9nX4nNLU/ysDUjAAZ9wZLoB57HlImQquPA74
c8lXTz5MVF140WB1f1Ck5PmeonJR2Xve7HTYCoBmGo71jOxHxCgJbp1Giiho0Imd
3NXzzahEnAiy/L5PhqqYTmIfTeAHQ2Fo7GkHCjMnS20FP2fBtvPrc7db03F+FZ4y
QTfbT0oR42NdeW21AbCRGY3P47axB3xDJX4LOYrb4uo4CIzd1yatlHk407NRRyv8
pab6aeJR23FouA/tcvv+T36D3vqRw78e6BWdoyowWOd7CUOgjtSC3lKGzfT6hSY=
=0BDZ
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v4.20-1' of git://git.infradead.org/linux-platform-drivers-x86
Pull x86 platform driver updates from Darren Hart:
- Move the Dell dcdbas and dell_rbu drivers into platform/drivers/x86
as they are closely coupled with other drivers in this location.
- Improve _init* usage for acerhdf and fix some usage issues with
messages and module parameters.
- Simplify asus-wmi by calling ACPI/WMI methods directly, eliminating
workqueue overhead, eliminate double reporting of keyboard backlight.
- Fix wake from USB failure on Bay Trail devices (intel_int0002_vgpio).
- Notify intel_telemetry users when IPC1 device is not enabled.
- Update various drivers with new laptop model IDs.
- Update several intel drivers to use SPDX identifers and order headers
alphabetically.
* tag 'platform-drivers-x86-v4.20-1' of git://git.infradead.org/linux-platform-drivers-x86: (64 commits)
HID: asus: only support backlight when it's not driven by WMI
platform/x86: asus-wmi: export function for evaluating WMI methods
platform/x86: asus-wmi: Only notify kbd LED hw_change by fn-key pressed
platform/x86: wmi: declare device_type structure as constant
platform/x86: ideapad: Add Y530-15ICH to no_hw_rfkill
platform/x86: Add Intel AtomISP2 dummy / power-management driver
platform/x86: touchscreen_dmi: Add min-x and min-y settings for various models
platform/x86: touchscreen_dmi: Add info for the Onda V80 Plus v3 tablet
platform/x86: touchscreen_dmi: Add info for the Trekstor Primetab T13B tablet
platform/x86: intel_telemetry: Get rid of custom macro
platform/x86: intel_telemetry: report debugfs failure
MAINTAINERS: intel_telemetry: Update maintainers info
platform/x86: Add LG Gram laptop special features driver
platform/x86: asus-wmi: Simplify the keyboard brightness updating process
platform/x86: touchscreen_dmi: Add info for the Trekstor Primebook C11 convertible
platform/x86: mlx-platform: Properly use mlxplat_mlxcpld_msn201x_items
MAINTAINERS: intel_pmc_core: Update MAINTAINERS
firmware: dcdbas: include linux/io.h
platform/x86: intel-wmi-thunderbolt: Add dynamic debugging
platform/x86: intel-wmi-thunderbolt: Convert to use SPDX identifier
...
Now that in_compat_syscall() is consistent on all architectures and does
not longer report true on native i686, the workarounds (ifdeffery and
helpers) can be removed.
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Andy Lutomirsky <luto@kernel.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: linux-efi@vger.kernel.org
Cc: netdev@vger.kernel.org
Link: https://lkml.kernel.org/r/20181012134253.23266-3-dima@arista.com
When a memblock allocation APIs are called with align = 0, the alignment
is implicitly set to SMP_CACHE_BYTES.
Implicit alignment is done deep in the memblock allocator and it can
come as a surprise. Not that such an alignment would be wrong even
when used incorrectly but it is better to be explicit for the sake of
clarity and the prinicple of the least surprise.
Replace all such uses of memblock APIs with the 'align' parameter
explicitly set to SMP_CACHE_BYTES and stop implicit alignment assignment
in the memblock internal allocation functions.
For the case when memblock APIs are used via helper functions, e.g. like
iommu_arena_new_node() in Alpha, the helper functions were detected with
Coccinelle's help and then manually examined and updated where
appropriate.
The direct memblock APIs users were updated using the semantic patch below:
@@
expression size, min_addr, max_addr, nid;
@@
(
|
- memblock_alloc_try_nid_raw(size, 0, min_addr, max_addr, nid)
+ memblock_alloc_try_nid_raw(size, SMP_CACHE_BYTES, min_addr, max_addr,
nid)
|
- memblock_alloc_try_nid_nopanic(size, 0, min_addr, max_addr, nid)
+ memblock_alloc_try_nid_nopanic(size, SMP_CACHE_BYTES, min_addr, max_addr,
nid)
|
- memblock_alloc_try_nid(size, 0, min_addr, max_addr, nid)
+ memblock_alloc_try_nid(size, SMP_CACHE_BYTES, min_addr, max_addr, nid)
|
- memblock_alloc(size, 0)
+ memblock_alloc(size, SMP_CACHE_BYTES)
|
- memblock_alloc_raw(size, 0)
+ memblock_alloc_raw(size, SMP_CACHE_BYTES)
|
- memblock_alloc_from(size, 0, min_addr)
+ memblock_alloc_from(size, SMP_CACHE_BYTES, min_addr)
|
- memblock_alloc_nopanic(size, 0)
+ memblock_alloc_nopanic(size, SMP_CACHE_BYTES)
|
- memblock_alloc_low(size, 0)
+ memblock_alloc_low(size, SMP_CACHE_BYTES)
|
- memblock_alloc_low_nopanic(size, 0)
+ memblock_alloc_low_nopanic(size, SMP_CACHE_BYTES)
|
- memblock_alloc_from_nopanic(size, 0, min_addr)
+ memblock_alloc_from_nopanic(size, SMP_CACHE_BYTES, min_addr)
|
- memblock_alloc_node(size, 0, nid)
+ memblock_alloc_node(size, SMP_CACHE_BYTES, nid)
)
[mhocko@suse.com: changelog update]
[akpm@linux-foundation.org: coding-style fixes]
[rppt@linux.ibm.com: fix missed uses of implicit alignment]
Link: http://lkml.kernel.org/r/20181016133656.GA10925@rapoport-lnx
Link: http://lkml.kernel.org/r/1538687224-17535-1-git-send-email-rppt@linux.vnet.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Suggested-by: Michal Hocko <mhocko@suse.com>
Acked-by: Paul Burton <paul.burton@mips.com> [MIPS]
Acked-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc]
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Richard Weinberger <richard@nod.at>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Move remaining definitions and declarations from include/linux/bootmem.h
into include/linux/memblock.h and remove the redundant header.
The includes were replaced with the semantic patch below and then
semi-automated removal of duplicated '#include <linux/memblock.h>
@@
@@
- #include <linux/bootmem.h>
+ #include <linux/memblock.h>
[sfr@canb.auug.org.au: dma-direct: fix up for the removal of linux/bootmem.h]
Link: http://lkml.kernel.org/r/20181002185342.133d1680@canb.auug.org.au
[sfr@canb.auug.org.au: powerpc: fix up for removal of linux/bootmem.h]
Link: http://lkml.kernel.org/r/20181005161406.73ef8727@canb.auug.org.au
[sfr@canb.auug.org.au: x86/kaslr, ACPI/NUMA: fix for linux/bootmem.h removal]
Link: http://lkml.kernel.org/r/20181008190341.5e396491@canb.auug.org.au
Link: http://lkml.kernel.org/r/1536927045-23536-30-git-send-email-rppt@linux.vnet.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Serge Semin <fancer.lancer@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The free_bootmem_late and memblock_free_late do exactly the same thing:
they iterate over a range and give pages to the page allocator.
Replace calls to free_bootmem_late with calls to memblock_free_late and
remove the bootmem variant.
Link: http://lkml.kernel.org/r/1536927045-23536-25-git-send-email-rppt@linux.vnet.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Serge Semin <fancer.lancer@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Make it explicit that the caller gets a physical address rather than a
virtual one.
This will also allow using meblock_alloc prefix for memblock allocations
returning virtual address, which is done in the following patches.
The conversion is done using the following semantic patch:
@@
expression e1, e2, e3;
@@
(
- memblock_alloc(e1, e2)
+ memblock_phys_alloc(e1, e2)
|
- memblock_alloc_nid(e1, e2, e3)
+ memblock_phys_alloc_nid(e1, e2, e3)
|
- memblock_alloc_try_nid(e1, e2, e3)
+ memblock_phys_alloc_try_nid(e1, e2, e3)
)
Link: http://lkml.kernel.org/r/1536927045-23536-7-git-send-email-rppt@linux.vnet.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Serge Semin <fancer.lancer@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The most noteworthy SoC driver changes this time include:
- The TEE subsystem gains an in-kernel interface to access the TEE
from device drivers.
- The reset controller subsystem gains a driver for the Qualcomm
Snapdragon 845 Power Domain Controller.
- The Xilinx Zynq platform now has a firmware interface for its
platform management unit. This contains a firmware "ioctl" interface
that was a little controversial at first, but the version we merged
solved that by not exposing arbitrary firmware calls to user space.
- The Amlogic Meson platform gains a "canvas" driver that is used
for video processing and shared between different high-level drivers.
The rest is more of the usual, mostly related to SoC specific power
management support and core drivers in drivers/soc:
- Several Renesas SoCs (RZ/G1N, RZ/G2M, R-Car V3M, RZ/A2M) gain new
features related to power and reset control.
- The Mediatek mt8183 and mt6765 SoC platforms gain support for
their respective power management chips.
- A new driver for NXP i.MX8, which need a firmware interface for
power management.
- The SCPI firmware interface now contains support estimating power
usage of performance states
- The NVIDIA Tegra "pmc" driver gains a few new features, in particular
a pinctrl interface for configuring the pads.
- Lots of small changes for Qualcomm, in particular the "smem"
device driver.
- Some cleanups for the TI OMAP series related to their sysc
controller.
Additional cleanups and bugfixes in SoC specific drivers include the
Meson, Keystone, NXP, AT91, Sunxi, Actions, and Tegra platforms.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=c/PQ
-----END PGP SIGNATURE-----
Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC driver updates from Arnd Bergmann:
"The most noteworthy SoC driver changes this time include:
- The TEE subsystem gains an in-kernel interface to access the TEE
from device drivers.
- The reset controller subsystem gains a driver for the Qualcomm
Snapdragon 845 Power Domain Controller.
- The Xilinx Zynq platform now has a firmware interface for its
platform management unit. This contains a firmware "ioctl"
interface that was a little controversial at first, but the version
we merged solved that by not exposing arbitrary firmware calls to
user space.
- The Amlogic Meson platform gains a "canvas" driver that is used for
video processing and shared between different high-level drivers.
The rest is more of the usual, mostly related to SoC specific power
management support and core drivers in drivers/soc:
- Several Renesas SoCs (RZ/G1N, RZ/G2M, R-Car V3M, RZ/A2M) gain new
features related to power and reset control.
- The Mediatek mt8183 and mt6765 SoC platforms gain support for their
respective power management chips.
- A new driver for NXP i.MX8, which need a firmware interface for
power management.
- The SCPI firmware interface now contains support estimating power
usage of performance states
- The NVIDIA Tegra "pmc" driver gains a few new features, in
particular a pinctrl interface for configuring the pads.
- Lots of small changes for Qualcomm, in particular the "smem" device
driver.
- Some cleanups for the TI OMAP series related to their sysc
controller.
Additional cleanups and bugfixes in SoC specific drivers include the
Meson, Keystone, NXP, AT91, Sunxi, Actions, and Tegra platforms"
* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (129 commits)
firmware: tegra: bpmp: Implement suspend/resume support
drivers: clk: Add ZynqMP clock driver
dt-bindings: clock: Add bindings for ZynqMP clock driver
firmware: xilinx: Add zynqmp IOCTL API for device control
Documentation: xilinx: Add documentation for eemi APIs
MAINTAINERS: imx: include drivers/firmware/imx path
firmware: imx: add misc svc support
firmware: imx: add SCU firmware driver support
reset: Fix potential use-after-free in __of_reset_control_get()
dt-bindings: arm: fsl: add scu binding doc
soc: fsl: qbman: add interrupt coalesce changing APIs
soc: fsl: bman_portals: defer probe after bman's probe
soc: fsl: qbman: Use last response to determine valid bit
soc: fsl: qbman: Add 64 bit DMA addressing requirement to QBMan
soc: fsl: qbman: replace CPU 0 with any online CPU in hotplug handlers
soc: fsl: qbman: Check if CPU is offline when initializing portals
reset: qcom: PDC Global (Power Domain Controller) reset controller
dt-bindings: reset: Add PDC Global binding for SDM845 SoCs
reset: Grammar s/more then once/more than once/
bus: ti-sysc: Just use SET_NOIRQ_SYSTEM_SLEEP_PM_OPS
...
- Sync dtc with upstream version v1.4.7-14-gc86da84d30e4
- Work to get rid of direct accesses to struct device_node name and
type pointers in preparation for removing them. New helpers for
parsing DT cpu nodes and conversions to use the helpers. printk
conversions to %pOFn for printing DT node names. Most went thru
subystem trees, so this is the remainder.
- Fixes to DT child node lookups to actually be restricted to child
nodes instead of treewide.
- Refactoring of dtb targets out of arch code. This makes the support
more uniform and enables building all dtbs on c6x, microblaze, and
powerpc.
- Various DT binding updates for Renesas r8a7744 SoC
- Vendor prefixes for Facebook, OLPC
- Restructuring of some ARM binding docs moving some peripheral bindings
out of board/SoC binding files
- New "secure-chosen" binding for secure world settings on ARM
- Dual licensing of 2 DT IRQ binding headers
-----BEGIN PGP SIGNATURE-----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=335v
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull Devicetree updates from Rob Herring:
"A bit bigger than normal as I've been busy this cycle.
There's a few things with dependencies and a few things subsystem
maintainers didn't pick up, so I'm taking them thru my tree.
The fixes from Johan didn't get into linux-next, but they've been
waiting for some time now and they are what's left of what subsystem
maintainers didn't pick up.
Summary:
- Sync dtc with upstream version v1.4.7-14-gc86da84d30e4
- Work to get rid of direct accesses to struct device_node name and
type pointers in preparation for removing them. New helpers for
parsing DT cpu nodes and conversions to use the helpers. printk
conversions to %pOFn for printing DT node names. Most went thru
subystem trees, so this is the remainder.
- Fixes to DT child node lookups to actually be restricted to child
nodes instead of treewide.
- Refactoring of dtb targets out of arch code. This makes the support
more uniform and enables building all dtbs on c6x, microblaze, and
powerpc.
- Various DT binding updates for Renesas r8a7744 SoC
- Vendor prefixes for Facebook, OLPC
- Restructuring of some ARM binding docs moving some peripheral
bindings out of board/SoC binding files
- New "secure-chosen" binding for secure world settings on ARM
- Dual licensing of 2 DT IRQ binding headers"
* tag 'devicetree-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (78 commits)
ARM: dt: relicense two DT binding IRQ headers
power: supply: twl4030-charger: fix OF sibling-node lookup
NFC: nfcmrvl_uart: fix OF child-node lookup
net: stmmac: dwmac-sun8i: fix OF child-node lookup
net: bcmgenet: fix OF child-node lookup
drm/msm: fix OF child-node lookup
drm/mediatek: fix OF sibling-node lookup
of: Add missing exports of node name compare functions
dt-bindings: Add OLPC vendor prefix
dt-bindings: misc: bk4: Add device tree binding for Liebherr's BK4 SPI bus
dt-bindings: thermal: samsung: Add SPDX license identifier
dt-bindings: clock: samsung: Add SPDX license identifiers
dt-bindings: timer: ostm: Add R7S9210 support
dt-bindings: phy: rcar-gen2: Add r8a7744 support
dt-bindings: can: rcar_can: Add r8a7744 support
dt-bindings: timer: renesas, cmt: Document r8a7744 CMT support
dt-bindings: watchdog: renesas-wdt: Document r8a7744 support
dt-bindings: thermal: rcar: Add device tree support for r8a7744
Documentation: dt: Add binding for /secure-chosen/stdout-path
dt-bindings: arm: zte: Move sysctrl bindings to their own doc
...
Here is the big set of char/misc patches for 4.20-rc1.
Loads of things here, we have new code in all of these driver
subsystems:
fpga
stm
extcon
nvmem
eeprom
hyper-v
gsmi
coresight
thunderbolt
vmw_balloon
goldfish
soundwire
along with lots of fixes and minor changes to other small drivers.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCW9Le5A8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yn+BQCfZ6DtCIgqo0UW3dLV8Fd0wya9kw0AoNglzJJ6
YRZiaSdRiggARpNdh3ME
=97BX
-----END PGP SIGNATURE-----
Merge tag 'char-misc-4.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the big set of char/misc patches for 4.20-rc1.
Loads of things here, we have new code in all of these driver
subsystems:
- fpga
- stm
- extcon
- nvmem
- eeprom
- hyper-v
- gsmi
- coresight
- thunderbolt
- vmw_balloon
- goldfish
- soundwire
along with lots of fixes and minor changes to other small drivers.
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-4.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (245 commits)
Documentation/security-bugs: Clarify treatment of embargoed information
lib: Fix ia64 bootloader linkage
MAINTAINERS: Clarify UIO vs UIOVEC maintainer
docs/uio: fix a grammar nitpick
docs: fpga: document programming fpgas using regions
fpga: add devm_fpga_region_create
fpga: bridge: add devm_fpga_bridge_create
fpga: mgr: add devm_fpga_mgr_create
hv_balloon: Replace spin_is_locked() with lockdep
sgi-xp: Replace spin_is_locked() with lockdep
eeprom: New ee1004 driver for DDR4 memory
eeprom: at25: remove unneeded 'at25_remove'
w1: IAD Register is yet readable trough iad sys file. Fix snprintf (%u for unsigned, count for max size).
misc: mic: scif: remove set but not used variables 'src_dma_addr, dst_dma_addr'
misc: mic: fix a DMA pool free failure
platform: goldfish: pipe: Add a blank line to separate varibles and code
platform: goldfish: pipe: Remove redundant casting
platform: goldfish: pipe: Call misc_deregister if init fails
platform: goldfish: pipe: Move the file-scope goldfish_pipe_dev variable into the driver state
platform: goldfish: pipe: Move the file-scope goldfish_pipe_miscdev variable into the driver state
...
Add new GSMI commands (GSMI_CMD_LOG_S0IX_SUSPEND = 0xa,
GSMI_CMD_LOG_S0IX_RESUME = 0xb) that allow firmware to log any
information during S0ix suspend/resume paths.
Traditional ACPI suspend S3 involves BIOS both during the suspend and
the resume paths. However, modern suspend type like S0ix does not
involve firmware on either of the paths. This command gives the
firmware an opportunity to log any required information about the
suspend and resume operations e.g. wake sources.
Additionally, this change adds a module parameter to allow platforms
to specifically enable S0ix logging if required. This prevents any
other platforms from unnecessarily making a GSMI call which could have
any side-effects.
Tested by verifying that wake sources are correctly logged in eventlog.
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Rajat Jain <rajatja@chromium.org>
Signed-off-by: Furquan Shaikh <furquan@google.com>
Tested-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
[zwisler: update changelog for upstream]
Signed-off-by: Ross Zwisler <zwisler@google.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Instead of selecting EFI and EFI_VARS automatically when GSMI is
enabled let that portion of the driver be conditionally compiled
if EFI and EFI_VARS are enabled.
This allows the rest of the driver (specifically event log) to
be used if EFI_VARS is not enabled.
To test:
1) verify that EFI_VARS is not automatically selected when
CONFIG_GOOGLE_GSMI is enabled
2) verify that the kernel boots on Link and that GSMI event log
is still available and functional
3) specifically boot the kernel on Alex to ensure it does not
try to load efivars and that gsmi also does not load because it
is not in the supported DMI table
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Olof Johansson <olofj@chromium.org>
Signed-off-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Ben Zhang <benzh@chromium.org>
Signed-off-by: Filipe Brandenburger <filbranden@chromium.org>
Signed-off-by: Furquan Shaikh <furquan@google.com>
Tested-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
[zwisler: update changelog for upstream]
Signed-off-by: Ross Zwisler <zwisler@google.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The sysfs handler should return the number of bytes consumed, which in the
case of a successful write is the entire buffer. Also fix a bug where
param.data_len was being set to (count - (2 * sizeof(u32))) instead of just
(count - sizeof(u32)). The latter is correct because we skip over the
leading u32 which is our param.type, but we were also incorrectly
subtracting sizeof(u32) on the line where we were actually setting
param.data_len:
param.data_len = count - sizeof(u32);
This meant that for our example event.kernel_software_watchdog with total
length 10 bytes, param.data_len was just 2 prior to this change.
To test, successfully append an event to the log with gsmi sysfs.
This sample event is for a "Kernel Software Watchdog"
> xxd -g 1 event.kernel_software_watchdog
0000000: 01 00 00 00 ad de 06 00 00 00
> cat event.kernel_software_watchdog > /sys/firmware/gsmi/append_to_eventlog
> mosys eventlog list | tail -1
14 | 2012-06-25 10:14:14 | Kernl Event | Software Watchdog
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
Signed-off-by: Furquan Shaikh <furquan@google.com>
Tested-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
[zwisler: updated changelog for 2nd bug fix and upstream]
Signed-off-by: Ross Zwisler <zwisler@google.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This contains a fix for suspend/resume support for the BPMP found on
Tegra186 and Tegra194.
-----BEGIN PGP SIGNATURE-----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=uZkB
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-4.20-firmware-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/drivers
firmware: tegra: Changes for v4.20-rc1
This contains a fix for suspend/resume support for the BPMP found on
Tegra186 and Tegra194.
* tag 'tegra-for-4.20-firmware-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
firmware: tegra: bpmp: Implement suspend/resume support
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
When returning from a system sleep state, the BPMP driver needs to
reinitialize the IVC channels used to communicate with the BPMP to
restore proper functionality.
Signed-off-by: Thierry Reding <treding@nvidia.com>
This patchset adds CCF compliant clock driver for ZynqMP.
Clock driver queries supported clock information from firmware
and regiters pll and output clocks with CCF.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iEYEABECAAYFAlu8k7oACgkQykllyylKDCFmPACfewJHUsKUhaX77Ew+Pup5tFzC
GHgAn1Xb2fJF+9D4CSB+iwdQNPltuhBg
=QShK
-----END PGP SIGNATURE-----
Merge tag 'zynqmp-soc-clk-for-v4.20' of https://github.com/Xilinx/linux-xlnx into next/drivers
arm64: zynqmp: SoC CLK changes for v4.20
This patchset adds CCF compliant clock driver for ZynqMP.
Clock driver queries supported clock information from firmware
and regiters pll and output clocks with CCF.
* tag 'zynqmp-soc-clk-for-v4.20' of https://github.com/Xilinx/linux-xlnx:
drivers: clk: Add ZynqMP clock driver
dt-bindings: clock: Add bindings for ZynqMP clock driver
firmware: xilinx: Add zynqmp IOCTL API for device control
Documentation: xilinx: Add documentation for eemi APIs
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- A series from Aisheng Dong to add SCU firmware driver for i.MX8
SoCs. It implements IPC mechanism based on mailbox for message
exchange between AP and SCU firmware, and a set of SCU IPC
service APIs used by clients like i.MX8 power domain and clock
drivers.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJbu28SAAoJEFBXWFqHsHzOjMYIAI67+hAik09NkEQKovKjJCDz
N6k1XzY0LJl1tvaQ8x/txmp0l/4yosr8eWr+Lp+rhNrO0B48WmAccqnhaXpm2esZ
6NqBOMWt32Rue08dscaCaz5/SJHjzUlvkzjKbeMrwe/UZZWY3jn16fxqDknINjq4
Zout0CyD4Dwh9AYPDbayVGnWb68BtiZvgFch99GP3pJnK5hzH7uYpLlGTmbpDn5S
4uRVUtXOn/Y+ADhNORDjeP6t4DnLDnEQ5QpTyjYxryd4Su/yiLih41UeyqvfEyQ4
hLxdkve+JNWQpbfcE1F1Sz6yM+nb33Or0PNzsIaTV9jtNSozwoRLqa79OKD4oAA=
=x2CN
-----END PGP SIGNATURE-----
Merge tag 'imx-drivers-4.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/drivers
i.MX drivers change for 4.20, round 2:
- A series from Aisheng Dong to add SCU firmware driver for i.MX8
SoCs. It implements IPC mechanism based on mailbox for message
exchange between AP and SCU firmware, and a set of SCU IPC
service APIs used by clients like i.MX8 power domain and clock
drivers.
* tag 'imx-drivers-4.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
MAINTAINERS: imx: include drivers/firmware/imx path
firmware: imx: add misc svc support
firmware: imx: add SCU firmware driver support
dt-bindings: arm: fsl: add scu binding doc
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add ZynqMP firmware IOCTL API to control and configure
devices like PLLs, SD, Gem, etc.
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Jolly Shah <jollys@xilinx.com>
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
The System Controller Firmware (SCFW) is a low-level system function
which runs on a dedicated Cortex-M core to provide power, clock, and
resource management. It exists on some i.MX8 processors. e.g. i.MX8QM
(QM, QP), and i.MX8QX (QXP, DX).
This patch implements the SCU firmware IPC function and the common
message sending API sc_call_rpc.
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Jassi Brar <jassisinghbrar@gmail.com>
Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
In preparation to remove the node name pointer from struct device_node,
convert printf users to use the %pOFn format specifier.
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
* Refactor of SCM compatibles and clock requirements
* SMEM cleanup
* Add LLCC EDAC driver
* Fixes for GENI clocks and macros
* Fix includes for llcc-slice and smem
* String overflow fixes for APR and wcnss_ctrl
* Fixup for COMPILE_TEST of qcom driver Kconfigs
* Cleanup of Kconfig depends of rpmh, smd_rpm, smsm, and smp2p
* Add SCM dependencies to SPM and rmtfs-mem
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJbsQupAAoJEFKiBbHx2RXVQBYQAKWr3RsQlWJ09M0vm8qGeCCA
8FXxX9wqcU34KvYR16IIXzQ/25L4h1uLjvjBfQurn7zOFIrCoqn2PGOchGOyJEA0
hPw+RomT17BV1hRSJkl8lIXMqGCAvoc44VrAQyipCTpEJO82emh6qJ1ki5XpIvfI
EOad6S2IGNXU39F0B6rtl4+LL/Vfh+MOJcz0E23SVujtDT0pvxuP5aVGM+Faqif/
rQ4dKcYZokRHmuTlfg2azo4OmkLyrwsMjirna3NN3MX14wK5Ox53ESplGZXndt3V
Gy48IbXdTTjbmHT07aqPVSkFgulkaE9Z3MTw+vyn/r10ww6R55XtoSJIbS/v4+Y0
mzjTYTSHmxzpGHR4Rs+E1q9/7y8tbxO0uzFMHlmD8fNNbkK3FlXymGfVJFjSJGSN
hTN97zEYUKco4M6RXAly8XUrOetSglZwul1+gQnHYYCx7Y8BhgpyZtyjVeKzg1Mw
wqgAi+1+cOLG2JjI+h0Xo0xqvuWwl3e2jrmBZNs9BWoXaaWA2L7oqPL3bxq2TeWs
kF56I7YH5eD5sUGvShjrJ9WfKeN4hWpYSif/qg58kqz/zbCSjmmfiqQ7HmjJUetm
JnAZaik38YhsDvR8K1gECQiN2myjojjdyg3ONBk2y0Yho+ClVSMPo/qCceRy21/q
LVTRThQ0tZExH8zEJrJt
=rx3Z
-----END PGP SIGNATURE-----
Merge tag 'qcom-drivers-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/drivers
Qualcomm ARM Based Driver Updates for v4.20
* Refactor of SCM compatibles and clock requirements
* SMEM cleanup
* Add LLCC EDAC driver
* Fixes for GENI clocks and macros
* Fix includes for llcc-slice and smem
* String overflow fixes for APR and wcnss_ctrl
* Fixup for COMPILE_TEST of qcom driver Kconfigs
* Cleanup of Kconfig depends of rpmh, smd_rpm, smsm, and smp2p
* Add SCM dependencies to SPM and rmtfs-mem
* tag 'qcom-drivers-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux: (38 commits)
soc: qcom: geni: geni_se_clk_freq_match() should always accept multiples
soc: qcom: geni: Don't ignore clk_round_rate() errors in geni_se_clk_tbl_get()
soc: qcom: geni: Make version macros simpler
dt-bindings: firmware: scm: Add MSM8998 and SDM845
firmware: qcom: scm: Refactor clock handling
dt-bindings: firmware: scm: Refactor compatibles and clocks
soc: qcom: smem: a few last cleanups
soc: qcom: smem: verify partition host ids match
soc: qcom: smem: small change in global entry loop
soc: qcom: smem: verify partition offset_free_uncached
soc: qcom: smem: verify partition header size
soc: qcom: smem: introduce qcom_smem_partition_header()
soc: qcom: smem: require order of host ids to match
soc: qcom: smem: verify both host ids in partition header
soc: qcom: smem: small refactor in qcom_smem_enumerate_partitions()
soc: qcom: smem: always ignore partitions with 0 offset or size
soc: qcom: smem: initialize region struct only when successful
soc: qcom: smem: rename variable in qcom_smem_get_global()
drivers: qcom: rpmh-rsc: clear wait_for_compl after use
soc: qcom: rmtfs-mem: Validate that scm is available
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Add support for enlisting the help of the EFI firmware to create memory
reservations that persist across kexec.
- Add page fault handling to the runtime services support code on x86 so
we can gracefully recover from buggy EFI firmware.
- Fix command line handling on x86 for the boot path that omits the stub's
PE/COFF entry point.
- Other assorted fixes.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEnNKg2mrY9zMBdeK7wjcgfpV0+n0FAlurXR8ACgkQwjcgfpV0
+n2CGwf/V4exixXjTDwkqE6gY5bq0Y3AL8tp89wdbJzjgGOIJLKh3CrGr8xEFHrv
oYObcvB3SfNEIyGeBjc/8ZMw1P/j98s6ucsMm0u+V52k7xxu/xJoIPw3bX2R8LLc
QhedUmKWLFQXxottaqzRFi1m0rP9TlAlc2n2pjIPCywjTPzeT/jBTtnRGRRdpDkN
uxwv59eXc6MXuwJGhM9lGIBCu8ra54SiSByJSKoMwNYXQRCLtiBUg5iibWkKigHp
9rQiimQnDOuPiZ6JGFx6pwSu7cqv3d8LYk5EnU3zYfzxAvHRfxuf40joSeZzySby
vZ4zRog79DxkSnuvaQ0+phQHiq+yQg==
=HZGk
-----END PGP SIGNATURE-----
Merge tag 'efi-next' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi into efi/core
Pull EFI updates for v4.20 from Ard Biesheuvel:
- Add support for enlisting the help of the EFI firmware to create memory
reservations that persist across kexec.
- Add page fault handling to the runtime services support code on x86 so
we can gracefully recover from buggy EFI firmware.
- Fix command line handling on x86 for the boot path that omits the stub's
PE/COFF entry point.
- Other assorted fixes.
Move dcdbas to the more appropriate directory drivers/platform/x86.
Signed-off-by: Stuart Hayes <stuart.w.hayes@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Move dell_rbu to the more appropriate directory drivers/platform/x86.
Signed-off-by: Stuart Hayes <stuart.w.hayes@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
If the WSMT ACPI table is present and indicates that a fixed communication
buffer should be used, use the firmware-specified buffer instead of
allocating a buffer in memory for communications between the dcdbas driver
and firmare.
Signed-off-by: Stuart Hayes <stuart.w.hayes@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The dell_rbu driver takes firmware update payloads and puts them in memory so
the system BIOS can find them after a reboot. This sometimes fails (though
rarely), because the memory containing the payload is in the CPU cache but
never gets written back to main memory before the system is rebooted (CPU
cache contents are lost on reboot).
With this patch, the payload memory will be changed to uncachable to ensure
that the payload is actually in main memory before the system is rebooted.
Signed-off-by: Stuart Hayes <stuart.w.hayes@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
- Adding firmware API for SoC with debugfs interface
Firmware driver communicates to Platform Management Unit (PMU) by using
SMC instructions routed to Arm Trusted Firmware (ATF). Initial version
adds support for base firmware driver with query and clock APIs.
EEMI spec is available here:
https://www.xilinx.com/support/documentation/user_guides/ug1200-eemi-api.pdf
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iEYEABECAAYFAlurMMcACgkQykllyylKDCGE6gCfY2tOaxQCcBUzmh5ZXSUiQdeM
BA8AoJgu8dBLcD/U9S5+lDlCEMY26eSh
=tgPT
-----END PGP SIGNATURE-----
Merge tag 'zynqmp-soc-for-v4.20-v2' of https://github.com/Xilinx/linux-xlnx into next/drivers
arm64: zynqmp: SoC changes for v4.20
- Adding firmware API for SoC with debugfs interface
Firmware driver communicates to Platform Management Unit (PMU) by using
SMC instructions routed to Arm Trusted Firmware (ATF). Initial version
adds support for base firmware driver with query and clock APIs.
EEMI spec is available here:
https://www.xilinx.com/support/documentation/user_guides/ug1200-eemi-api.pdf
* tag 'zynqmp-soc-for-v4.20-v2' of https://github.com/Xilinx/linux-xlnx:
firmware: xilinx: Add debugfs for query data API
firmware: xilinx: Add debugfs interface
firmware: xilinx: Add clock APIs
firmware: xilinx: Add query data API
firmware: xilinx: Add Zynqmp firmware driver
dt-bindings: firmware: Add bindings for ZynqMP firmware
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Memory accesses performed by UEFI runtime services should be limited to:
- reading/executing from EFI_RUNTIME_SERVICES_CODE memory regions
- reading/writing from/to EFI_RUNTIME_SERVICES_DATA memory regions
- reading/writing by-ref arguments
- reading/writing from/to the stack.
Accesses outside these regions may cause the kernel to hang because the
memory region requested by the firmware isn't mapped in efi_pgd, which
causes a page fault in ring 0 and the kernel fails to handle it, leading
to die(). To save kernel from hanging, add an EFI specific page fault
handler which recovers from such faults by
1. If the efi runtime service is efi_reset_system(), reboot the machine
through BIOS.
2. If the efi runtime service is _not_ efi_reset_system(), then freeze
efi_rts_wq and schedule a new process.
The EFI page fault handler offers us two advantages:
1. Avoid potential hangs caused by buggy firmware.
2. Shout loud that the firmware is buggy and hence is not a kernel bug.
Tested-by: Bhupesh Sharma <bhsharma@redhat.com>
Suggested-by: Matt Fleming <matt@codeblueprint.co.uk>
Based-on-code-from: Ricardo Neri <ricardo.neri@intel.com>
Signed-off-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
[ardb: clarify commit log]
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
After the kernel has booted, if any accesses by firmware causes a page
fault, the efi page fault handler would freeze efi_rts_wq and schedules
a new process. To do this, the efi page fault handler needs
efi_rts_work. Hence, make it accessible.
There will be no race conditions in accessing this structure, because
all the calls to efi runtime services are already serialized.
Tested-by: Bhupesh Sharma <bhsharma@redhat.com>
Suggested-by: Matt Fleming <matt@codeblueprint.co.uk>
Based-on-code-from: Ricardo Neri <ricardo.neri@intel.com>
Signed-off-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Add exporting the UEFI runtime service ResetSystem for upper application or test
tools to use.
Signed-off-by: Ivan Hu <ivan.hu@canonical.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
When building with CONFIG_EFI and CONFIG_EFI_STUB on ARM, the libstub
Makefile would use -mno-single-pic-base without checking it was
supported by the compiler. As the ARM (32-bit) clang backend does not
support this flag, the build would fail.
This changes the Makefile to check the compiler's support for
-mno-single-pic-base before using it, similar to c1c386681b ("ARM:
8767/1: add support for building ARM kernel with clang").
Signed-off-by: Alistair Strachan <astrachan@google.com>
Reviewed-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Add kernel plumbing to reserve memory regions persistently on a EFI
system by adding entries to the MEMRESERVE linked list.
Tested-by: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Installing UEFI configuration tables can only be done before calling
ExitBootServices(), so if we want to use the new MEMRESRVE config table
from the kernel proper, we need to install a dummy entry from the stub.
Tested-by: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
In order to allow the OS to reserve memory persistently across a
kexec, introduce a Linux-specific UEFI configuration table that
points to the head of a linked list in memory, allowing each kernel
to add list items describing memory regions that the next kernel
should treat as reserved.
This is useful, e.g., for GICv3 based ARM systems that cannot disable
DMA access to the LPI tables, forcing them to reuse the same memory
region again after a kexec reboot.
Tested-by: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Add debugfs file to query platform specific data from firmware
using debugfs interface.
Signed-off-by: Rajan Vaja <rajanv@xilinx.com>
Signed-off-by: Jolly Shah <jollys@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Firmware-debug provides debugfs interface to all APIs.
Debugfs can be used to call firmware APIs with required
parameters.
Usage:
* Calling firmware API through debugfs:
# echo "<api-name> <arg1> .. <argn>" > /sys/.../zynqmp-firmware/pm
* Read output of last called firmware API:
# cat /sys/.../zynqmp-firmware/pm
Refer ug1200 for more information on these APIs:
* https://www.xilinx.com/support/documentation/user_guides/ug1200-eemi-api.pdf
Add basic debugfs file to get API version.
Signed-off-by: Rajan Vaja <rajanv@xilinx.com>
Signed-off-by: Jolly Shah <jollys@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Add clock APIs to control clocks through firmware
interface.
Signed-off-by: Rajan Vaja <rajanv@xilinx.com>
Signed-off-by: Jolly Shah <jollys@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Add ZynqMP firmware query data API to query platform
specific information(clocks, pins) from firmware.
Signed-off-by: Rajan Vaja <rajanv@xilinx.com>
Signed-off-by: Jolly Shah <jollys@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
This patch is adding communication layer with firmware.
Firmware driver provides an interface to firmware APIs.
Interface APIs can be used by any driver to communicate to
PMUFW(Platform Management Unit). All requests go through ATF.
Signed-off-by: Rajan Vaja <rajanv@xilinx.com>
Signed-off-by: Jolly Shah <jollys@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
1. Addition of interface to fetch estimated power from the firmware
corresponding to each OPP of a device
2. Cleanup using strlcpy to ensure NULL-terminated strings for name
strings instead of relying on the firmware to do the same
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=ux6I
-----END PGP SIGNATURE-----
Merge tag 'scmi-updates-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into next/drivers
SCMI updates for v4.20
1. Addition of interface to fetch estimated power from the firmware
corresponding to each OPP of a device
2. Cleanup using strlcpy to ensure NULL-terminated strings for name
strings instead of relying on the firmware to do the same
* tag 'scmi-updates-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_scmi: add a getter for power of performance states
firmware: arm_scmi: use strlcpy to ensure NULL-terminated strings
Signed-off-by: Olof Johansson <olof@lixom.net>
Trivial fix to spelling mistake in comment
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This function checks the header for sanity, registers a bus, and
populates devices for each coreboot table entry. Let's just populate
devices here and pull the other bits up into the caller so that this
function can be repurposed for pure device creation and registration.
Cc: Wei-Ning Huang <wnhuang@chromium.org>
Cc: Julius Werner <jwerner@chromium.org>
Cc: Brian Norris <briannorris@chromium.org>
Cc: Samuel Holland <samuel@sholland.org>
Suggested-by: Julius Werner <jwerner@chromium.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is all system memory, so we shouldn't be mapping this all with
ioremap() as these aren't I/O regions. Instead, they're memory regions
so we should use memremap(). Pick MEMREMAP_WB so we can map memory from
RAM directly if that's possible, otherwise it falls back to
ioremap_cache() like is being done here already. This also nicely
silences the sparse warnings in this code and reduces the need to copy
anything around anymore.
Cc: Wei-Ning Huang <wnhuang@chromium.org>
Cc: Julius Werner <jwerner@chromium.org>
Cc: Brian Norris <briannorris@chromium.org>
Cc: Samuel Holland <samuel@sholland.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The DT based and ACPI based platform drivers here do the same thing; map
some memory and hand it over to the coreboot bus to populate devices.
The only major difference is that the DT based driver doesn't map the
coreboot table header to figure out how large of a region to map for the
whole coreboot table and it uses of_iomap() instead of ioremap_cache().
A cached or non-cached mapping shouldn't matter here and mapping some
smaller region first before mapping the whole table is just more work
but should be OK. In the end, we can remove two files and combine the
code all in one place making it easier to reason about things.
We leave the old Kconfigs in place for a little while longer but make
them hidden and select the previously hidden config option. This way
users can upgrade without having to know to reselect this config in the
future. Later on we can remove the old hidden configs.
Cc: Wei-Ning Huang <wnhuang@chromium.org>
Cc: Julius Werner <jwerner@chromium.org>
Cc: Brian Norris <briannorris@chromium.org>
Cc: Samuel Holland <samuel@sholland.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The bus is registered in module_init() but is unregistered when the
platform driver remove() function calls coreboot_table_exit(). That
isn't symmetric and it causes the bus to appear on systems that compile
this code in, even when there isn't any coreboot firmware on the device.
Let's move the registration to the coreboot_table_init() function so
that it matches the exit path.
Cc: Wei-Ning Huang <wnhuang@chromium.org>
Cc: Julius Werner <jwerner@chromium.org>
Cc: Brian Norris <briannorris@chromium.org>
Cc: Samuel Holland <samuel@sholland.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Both callers of coreboot_table_init() ioremap the pointer that comes in
but they don't unmap the memory on failure. Both of them also fail probe
immediately with the return value of coreboot_table_init(), leaking a
mapping when it fails. The mapping isn't necessary at all after devices
are populated either, so we can just drop the mapping here when we exit
the function. Let's do that to simplify the code a bit and plug the leak.
Cc: Wei-Ning Huang <wnhuang@chromium.org>
Cc: Julius Werner <jwerner@chromium.org>
Cc: Brian Norris <briannorris@chromium.org>
Cc: Samuel Holland <samuel@sholland.org>
Fixes: 570d30c282 ("firmware: coreboot: Expose the coreboot table as a bus")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Now that the /firmware/coreboot node in DT is populated by the core DT
platform code with commit 3aa0582fdb ("of: platform: populate
/firmware/ node from of_platform_default_populate_init()") we should and
can remove the platform device creation here. Otherwise, the
of_platform_device_create() call will fail, the coreboot of driver won't
be registered, and this driver will never bind. At the same time, we
should move this driver to use MODULE_DEVICE_TABLE so that module
auto-load works properly when the coreboot device is auto-populated and
we should drop the of_node handling that was presumably placed here to
hold a reference to the DT node created during module init that no
longer happens.
Cc: Wei-Ning Huang <wnhuang@chromium.org>
Cc: Julius Werner <jwerner@chromium.org>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Cc: Samuel Holland <samuel@sholland.org>
Reviewed-by: Sudeep Holla <Sudeep.Holla@arm.com>
Fixes: 3aa0582fdb ("of: platform: populate /firmware/ node from of_platform_default_populate_init()")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The structure gsmi_dev is local to the source and does not need to be
in global scope, so make it static.
Cleans up sparse warning:
symbol 'gsmi_dev' was not declared. Should it be static?
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
At one point in time all "future" platforms required three clocks, so
the binding and driver was written to treat this as the default case.
But new platforms has no clock requirements, which currently makes them
all a special case, causing the need for a patch in the binding and
driver for each new platform added.
This patch reworks the driver logic so that it will attempt to acquire
all three clocks and fail based on the given compatible. This allow us
to drop the clock requirement from "qcom,scm", in a way that will remain
backwards compatible with existing DT files.
Specific compatibles are added for apq8084, msm8916 and msm8974 to match
the updated binding and although equivalent to qcom,scm both ipq4019 and
msm8996 are kept as these have been used without fallback to qcom,scm.
The result of this patch is that new platforms, that require no clocks,
can be use the fallback compatible of "qcom,scm".
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
The Amlogic Meson SoC Secure Monitor implements a call to retrieve an unique
SoC ID starting from the GX Family and all new families.
The serial number is simply exposed as a sysfs entry under the firmware
sysfs directory.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Default EFI_ARMSTUB_DTB_LOADER to y to allow the dtb= command
line parameter to function with efi loader.
Required for development purposes and to boot on existing bootloaders
that do not support devicetree provided by the firmware or by the
bootloader.
Fixes: 3d7ee348aa ("efi/libstub/arm: Add opt-in Kconfig option ...")
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
The SCMI protocol can be used to get power estimates from firmware
corresponding to each performance state of a device. Although these power
costs are already managed by the SCMI firmware driver, they are not
exposed to any external subsystem yet.
Fix this by adding a new get_power() interface to the exisiting perf_ops
defined for the SCMI protocol.
Signed-off-by: Quentin Perret <quentin.perret@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Replace all the memcpy() for copying name strings from the firmware with
strlcpy() to make sure we are bounded by the source buffer size and we
also always have NULL-terminated strings.
This is needed to avoid out of bounds accesses if the firmware returns
a non-terminated string.
Reported-by: Olof Johansson <olof@lixom.net>
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Firmware can provide zero as values for sustained performance level and
corresponding sustained frequency in kHz in order to hide the actual
frequencies and provide only abstract values. It may endup with divide
by zero scenario resulting in kernel panic.
Let's set the multiplication factor to one if either one or both of them
(sustained_perf_level and sustained_freq) are set to zero.
Fixes: a9e3fbfaa0 ("firmware: arm_scmi: add initial support for performance protocol")
Reported-by: Ionela Voinescu <ionela.voinescu@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Texas Instrument's System Control Interface (TISCI) permits the
ability for Operating Systems to running in virtual machines to be
able to independently communicate with the firmware without the need
going through an hypervisor.
The "host-id" in effect is the hardware representation of the
host (example: VMs locked to a core) as identified to the System
Controller.
Provide support as an optional parameter implementation and use the
compatible data as default if one is not provided by device tree.
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
- add support for deferred console takeover, when enabled defers
fbcon taking over the console from the dummy console until the
first text is displayed on the console - together with the "quiet"
kernel commandline option this allows fbcon to still be used
together with a smooth graphical bootup (Hans de Goede)
- improve console locking debugging code (Thomas Zimmermann)
- copy the ACPI BGRT boot graphics to the framebuffer when deferred
console takeover support is used in efifb driver (Hans de Goede)
- update udlfb driver - fix lost console when the user unplugs a USB
adapter, fix the screen corruption issue, fix locking and add some
performance optimizations (Mikulas Patocka)
- update pxafb driver - fix using uninitialized memory, switch to
devm_* API, handle initialization errors and add support for
lcd-supply regulator (Daniel Mack)
- add support for boards booted with a DeviceTree in pxa3xx_gcu
driver (Daniel Mack)
- rename omap2 module to omap2fb.ko to avoid conflicts with omap1
driver (Arnd Bergmann)
- enable ACPI-based enumeration for goldfishfb driver (Yu Ning)
- fix goldfishfb driver to make user space Android code use 60 fps
(Christoffer Dall)
- print big fat warning when nomodeset kernel parameter is used in
vgacon driver (Lyude Paul)
- remove VLA usage from fsl-diu-fb driver (Kees Cook)
- misc fixes (Julia Lawall, Geert Uytterhoeven, Fredrik Noring,
Yisheng Xie, Dan Carpenter, Daniel Vetter, Anton Vasilyev, Randy
Dunlap, Gustavo A. R. Silva, Colin Ian King, Fengguang Wu)
- misc cleanups (Roman Kiryanov, Yisheng Xie, Colin Ian King)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=7UE9
-----END PGP SIGNATURE-----
Merge tag 'fbdev-v4.19' of https://github.com/bzolnier/linux
Pull fbdev updates from Bartlomiej Zolnierkiewicz:
"Mostly small fixes and cleanups for fb drivers (the biggest updates
are for udlfb and pxafb drivers). This also adds deferred console
takeover support to the console code and efifb driver.
Summary:
- add support for deferred console takeover, when enabled defers
fbcon taking over the console from the dummy console until the
first text is displayed on the console - together with the "quiet"
kernel commandline option this allows fbcon to still be used
together with a smooth graphical bootup (Hans de Goede)
- improve console locking debugging code (Thomas Zimmermann)
- copy the ACPI BGRT boot graphics to the framebuffer when deferred
console takeover support is used in efifb driver (Hans de Goede)
- update udlfb driver - fix lost console when the user unplugs a USB
adapter, fix the screen corruption issue, fix locking and add some
performance optimizations (Mikulas Patocka)
- update pxafb driver - fix using uninitialized memory, switch to
devm_* API, handle initialization errors and add support for
lcd-supply regulator (Daniel Mack)
- add support for boards booted with a DeviceTree in pxa3xx_gcu
driver (Daniel Mack)
- rename omap2 module to omap2fb.ko to avoid conflicts with omap1
driver (Arnd Bergmann)
- enable ACPI-based enumeration for goldfishfb driver (Yu Ning)
- fix goldfishfb driver to make user space Android code use 60 fps
(Christoffer Dall)
- print big fat warning when nomodeset kernel parameter is used in
vgacon driver (Lyude Paul)
- remove VLA usage from fsl-diu-fb driver (Kees Cook)
- misc fixes (Julia Lawall, Geert Uytterhoeven, Fredrik Noring,
Yisheng Xie, Dan Carpenter, Daniel Vetter, Anton Vasilyev, Randy
Dunlap, Gustavo A. R. Silva, Colin Ian King, Fengguang Wu)
- misc cleanups (Roman Kiryanov, Yisheng Xie, Colin Ian King)"
* tag 'fbdev-v4.19' of https://github.com/bzolnier/linux: (54 commits)
Documentation/fb: corrections for fbcon.txt
fbcon: Do not takeover the console from atomic context
dummycon: Stop exporting dummycon_[un]register_output_notifier
fbcon: Only defer console takeover if the current console driver is the dummycon
fbcon: Only allow FRAMEBUFFER_CONSOLE_DEFERRED_TAKEOVER if fbdev is builtin
fbdev: omap2: omapfb: fix ifnullfree.cocci warnings
fbdev: omap2: omapfb: fix bugon.cocci warnings
fbdev: omap2: omapfb: fix boolreturn.cocci warnings
fb: amifb: fix build warnings when not builtin
fbdev/core: Disable console-lock warnings when fb.lockless_register_fb is set
console: Replace #if 0 with atomic var 'ignore_console_lock_warning'
udlfb: use spin_lock_irq instead of spin_lock_irqsave
udlfb: avoid prefetch
udlfb: optimization - test the backing buffer
udlfb: allow reallocating the framebuffer
udlfb: set line_length in dlfb_ops_set_par
udlfb: handle allocation failure
udlfb: set optimal write delay
udlfb: make a local copy of fb_ops
udlfb: don't switch if we are switching to the same videomode
...
Some of the larger changes this merge window:
- Removal of drivers for Exynos5440, a Samsung SoC that never saw
widespread use.
- Uniphier support for USB3 and SPI reset handling
- Syste control and SRAM drivers and bindings for Allwinner platforms
- Qualcomm AOSS (Always-on subsystem) reset controller drivers
- Raspberry Pi hwmon driver for voltage
- Mediatek pwrap (pmic) support for MT6797 SoC
-----BEGIN PGP SIGNATURE-----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=ZjwY
-----END PGP SIGNATURE-----
Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC driver updates from Olof Johansson:
"Some of the larger changes this merge window:
- Removal of drivers for Exynos5440, a Samsung SoC that never saw
widespread use.
- Uniphier support for USB3 and SPI reset handling
- Syste control and SRAM drivers and bindings for Allwinner platforms
- Qualcomm AOSS (Always-on subsystem) reset controller drivers
- Raspberry Pi hwmon driver for voltage
- Mediatek pwrap (pmic) support for MT6797 SoC"
* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (52 commits)
drivers/firmware: psci_checker: stash and use topology_core_cpumask for hotplug tests
soc: fsl: cleanup Kconfig menu
soc: fsl: dpio: Convert DPIO documentation to .rst
staging: fsl-mc: Remove remaining files
staging: fsl-mc: Move DPIO from staging to drivers/soc/fsl
staging: fsl-dpaa2: eth: move generic FD defines to DPIO
soc: fsl: qe: gpio: Add qe_gpio_set_multiple
usb: host: exynos: Remove support for Exynos5440
clk: samsung: Remove support for Exynos5440
soc: sunxi: Add the A13, A23 and H3 system control compatibles
reset: uniphier: add reset control support for SPI
cpufreq: exynos: Remove support for Exynos5440
ata: ahci-platform: Remove support for Exynos5440
soc: imx6qp: Use GENPD_FLAG_ALWAYS_ON for PU errata
soc: mediatek: pwrap: add mt6351 driver for mt6797 SoCs
soc: mediatek: pwrap: add pwrap driver for mt6797 SoCs
soc: mediatek: pwrap: fix cipher init setting error
dt-bindings: pwrap: mediatek: add pwrap support for MT6797
reset: uniphier: add USB3 core reset control
dt-bindings: reset: uniphier: add USB3 core reset support
...
To allow existing C code to be incorporated into the decompressor or the
UEFI stub, introduce a CPP macro that turns all EXPORT_SYMBOL_xxx
declarations into nops, and #define it in places where such exports are
undesirable. Note that this gets rid of a rather dodgy redefine of
linux/export.h's header guard.
Link: http://lkml.kernel.org/r/20180704083651.24360-3-ard.biesheuvel@linaro.org
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Nicolas Pitre <nico@linaro.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morris <james.morris@microsoft.com>
Cc: James Morris <jmorris@namei.org>
Cc: Jessica Yu <jeyu@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Garnier <thgarnie@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Here is the bit set of char/misc drivers for 4.19-rc1
There is a lot here, much more than normal, seems like everyone is
writing new driver subsystems these days... Anyway, major things here
are:
- new FSI driver subsystem, yet-another-powerpc low-level
hardware bus
- gnss, finally an in-kernel GPS subsystem to try to tame all of
the crazy out-of-tree drivers that have been floating around
for years, combined with some really hacky userspace
implementations. This is only for GNSS receivers, but you
have to start somewhere, and this is great to see.
Other than that, there are new slimbus drivers, new coresight drivers,
new fpga drivers, and loads of DT bindings for all of these and existing
drivers.
Full details of everything is in the shortlog.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCW3g7ew8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykfBgCeOG0RkSI92XVZe0hs/QYFW9kk8JYAnRBf3Qpm
cvW7a+McOoKz/MGmEKsi
=TNfn
-----END PGP SIGNATURE-----
Merge tag 'char-misc-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the bit set of char/misc drivers for 4.19-rc1
There is a lot here, much more than normal, seems like everyone is
writing new driver subsystems these days... Anyway, major things here
are:
- new FSI driver subsystem, yet-another-powerpc low-level hardware
bus
- gnss, finally an in-kernel GPS subsystem to try to tame all of the
crazy out-of-tree drivers that have been floating around for years,
combined with some really hacky userspace implementations. This is
only for GNSS receivers, but you have to start somewhere, and this
is great to see.
Other than that, there are new slimbus drivers, new coresight drivers,
new fpga drivers, and loads of DT bindings for all of these and
existing drivers.
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (255 commits)
android: binder: Rate-limit debug and userspace triggered err msgs
fsi: sbefifo: Bump max command length
fsi: scom: Fix NULL dereference
misc: mic: SCIF Fix scif_get_new_port() error handling
misc: cxl: changed asterisk position
genwqe: card_base: Use true and false for boolean values
misc: eeprom: assignment outside the if statement
uio: potential double frees if __uio_register_device() fails
eeprom: idt_89hpesx: clean up an error pointer vs NULL inconsistency
misc: ti-st: Fix memory leak in the error path of probe()
android: binder: Show extra_buffers_size in trace
firmware: vpd: Fix section enabled flag on vpd_section_destroy
platform: goldfish: Retire pdev_bus
goldfish: Use dedicated macros instead of manual bit shifting
goldfish: Add missing includes to goldfish.h
mux: adgs1408: new driver for Analog Devices ADGS1408/1409 mux
dt-bindings: mux: add adi,adgs1408
Drivers: hv: vmbus: Cleanup synic memory free path
Drivers: hv: vmbus: Remove use of slow_virt_to_phys()
Drivers: hv: vmbus: Reset the channel callback in vmbus_onoffer_rescind()
...
-----BEGIN PGP SIGNATURE-----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=ClJZ
-----END PGP SIGNATURE-----
Merge tag 'media/v4.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- new Socionext MN88443x ISDB-S/T demodulator driver: mn88443x
- new sensor drivers: ak7375, ov2680 and rj54n1cb0c
- an old soc-camera sensor driver converted to the V4L2 framework:
mt9v111
- a new Voice-Coil Motor (VCM) driver: dw9807-vcm
- some cleanups at cx25821, removing legacy unused code
- some improvements at ddbridge driver
- new platform driver: vicodec
- some DVB API cleanups, removing ioctls and compat code for old
out-of-tree drivers that were never merged upstream
- improvements at DVB core to support frontents that support both
Satellite and non-satellite delivery systems
- got rid of the unused VIDIOC_RESERVED V4L2 ioctl
- some cleanups/improvements at gl861 ISDB driver
- several improvements on ov772x, ov7670 and ov5640, imx274, ov5645,
and smiapp sensor drivers
- fixes at em28xx to support dual TS devices
- some cleanups at V4L2/VB2 locking logic
- some API improvements at media controller
- some cec core and drivers improvements
- some uvcvideo improvements
- some improvements at platform drivers: stm32-dcmi, rcar-vin, coda,
reneseas-ceu, imx, vsp1, venus, camss
- lots of other cleanups and fixes
* tag 'media/v4.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (406 commits)
Revert "media: vivid: shut up warnings due to a non-trivial logic"
siano: get rid of an unused return code for debugfs register
media: isp: fix a warning about a wrong struct initializer
media: radio-wl1273: fix return code for the polling routine
media: s3c-camif: fix return code for the polling routine
media: saa7164: fix return codes for the polling routine
media: exynos-gsc: fix return code if mutex was interrupted
media: mt9v111: Fix build error with no VIDEO_V4L2_SUBDEV_API
media: xc4000: get rid of uneeded casts
media: drxj: get rid of uneeded casts
media: tuner-xc2028: don't use casts for printing sizes
media: cleanup fall-through comments
media: vivid: shut up warnings due to a non-trivial logic
media: rtl28xxu: be sure that it won't go past the array size
media: mt9v111: avoid going past the buffer
media: vsp1_dl: add a description for cmdpool field
media: sta2x11: add a missing parameter description
media: v4l2-mem2mem: add descriptions to MC fields
media: i2c: fix warning in Aptina MT9V111
media: imx: shut up a false positive warning
...
A bunch of good stuff in here:
- Wire up support for qspinlock, replacing our trusty ticket lock code
- Add an IPI to flush_icache_range() to ensure that stale instructions
fetched into the pipeline are discarded along with the I-cache lines
- Support for the GCC "stackleak" plugin
- Support for restartable sequences, plus an arm64 port for the selftest
- Kexec/kdump support on systems booting with ACPI
- Rewrite of our syscall entry code in C, which allows us to zero the
GPRs on entry from userspace
- Support for chained PMU counters, allowing 64-bit event counters to be
constructed on current CPUs
- Ensure scheduler topology information is kept up-to-date with CPU
hotplug events
- Re-enable support for huge vmalloc/IO mappings now that the core code
has the correct hooks to use break-before-make sequences
- Miscellaneous, non-critical fixes and cleanups
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABCgAGBQJbbV41AAoJELescNyEwWM0WoEIALhrKtsIn6vqFlSs/w6aDuJL
cMWmFxjTaKLmIq2+cJIdFLOJ3CH80Pu9gB+nEv/k+cZdCTfUVKfRf28HTpmYWsht
bb4AhdHMC7yFW752BHk+mzJspeC8h/2Rm8wMuNVplZ3MkPrwo3vsiuJTofLhVL/y
BihlU3+5sfBvCYIsWnuEZIev+/I/s/qm1ASiqIcKSrFRZP6VTt5f9TC75vFI8seW
7yc3odKb0CArexB8yBjiPNziehctQF42doxQyL45hezLfWw4qdgHOSiwyiOMxEz9
Fwwpp8Tx33SKLNJgqoqYznGW9PhYJ7n2Kslv19uchJrEV+mds82vdDNaWRULld4=
=kQn6
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"A bunch of good stuff in here. Worth noting is that we've pulled in
the x86/mm branch from -tip so that we can make use of the core
ioremap changes which allow us to put down huge mappings in the
vmalloc area without screwing up the TLB. Much of the positive
diffstat is because of the rseq selftest for arm64.
Summary:
- Wire up support for qspinlock, replacing our trusty ticket lock
code
- Add an IPI to flush_icache_range() to ensure that stale
instructions fetched into the pipeline are discarded along with the
I-cache lines
- Support for the GCC "stackleak" plugin
- Support for restartable sequences, plus an arm64 port for the
selftest
- Kexec/kdump support on systems booting with ACPI
- Rewrite of our syscall entry code in C, which allows us to zero the
GPRs on entry from userspace
- Support for chained PMU counters, allowing 64-bit event counters to
be constructed on current CPUs
- Ensure scheduler topology information is kept up-to-date with CPU
hotplug events
- Re-enable support for huge vmalloc/IO mappings now that the core
code has the correct hooks to use break-before-make sequences
- Miscellaneous, non-critical fixes and cleanups"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (90 commits)
arm64: alternative: Use true and false for boolean values
arm64: kexec: Add comment to explain use of __flush_icache_range()
arm64: sdei: Mark sdei stack helper functions as static
arm64, kaslr: export offset in VMCOREINFO ELF notes
arm64: perf: Add cap_user_time aarch64
efi/libstub: Only disable stackleak plugin for arm64
arm64: drop unused kernel_neon_begin_partial() macro
arm64: kexec: machine_kexec should call __flush_icache_range
arm64: svc: Ensure hardirq tracing is updated before return
arm64: mm: Export __sync_icache_dcache() for xen-privcmd
drivers/perf: arm-ccn: Use devm_ioremap_resource() to map memory
arm64: Add support for STACKLEAK gcc plugin
arm64: Add stack information to on_accessible_stack
drivers/perf: hisi: update the sccl_id/ccl_id when MT is supported
arm64: fix ACPI dependencies
rseq/selftests: Add support for arm64
arm64: acpi: fix alignment fault in accessing ACPI
efi/arm: map UEFI memory map even w/o runtime services enabled
efi/arm: preserve early mapping of UEFI memory map longer for BGRT
drivers: acpi: add dependency of EFI for arm64
...
Pull x86 mm updates from Thomas Gleixner:
- Make lazy TLB mode even lazier to avoid pointless switch_mm()
operations, which reduces CPU load by 1-2% for memcache workloads
- Small cleanups and improvements all over the place
* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm: Remove redundant check for kmem_cache_create()
arm/asm/tlb.h: Fix build error implicit func declaration
x86/mm/tlb: Make clear_asid_other() static
x86/mm/tlb: Skip atomic operations for 'init_mm' in switch_mm_irqs_off()
x86/mm/tlb: Always use lazy TLB mode
x86/mm/tlb: Only send page table free TLB flush to lazy TLB CPUs
x86/mm/tlb: Make lazy TLB mode lazier
x86/mm/tlb: Restructure switch_mm_irqs_off()
x86/mm/tlb: Leave lazy TLB mode at page table free time
mm: Allocate the mm_cpumask (mm->cpu_bitmap[]) dynamically based on nr_cpu_ids
x86/mm: Add TLB purge to free pmd/pte page interfaces
ioremap: Update pgtable free interfaces with addr
x86/mm: Disable ioremap free page handling on x86-PAE
A couple of drivers produced build errors after the mod_devicetable.h
header was split out from the platform_device one, e.g.
drivers/media/platform/davinci/vpbe_osd.c:42:40: error: array type has incomplete element type 'struct platform_device_id'
drivers/media/platform/davinci/vpbe_venc.c:42:40: error: array type has incomplete element type 'struct platform_device_id'
This adds the inclusion where needed.
Fixes: ac3167257b ("headers: separate linux/mod_devicetable.h from linux/platform_device.h")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Stephen Boyd