Both bootmem and memblock are have pretty good internal documentation
coverage. With addition of some overview we get a nice description of the
early memory management.
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
The BTF conflicts were simple overlapping changes.
The virtio_net conflict was an overlap of a fix of statistics counter,
happening alongisde a move over to a bonafide statistics structure
rather than counting value on the stack.
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, avg_lat is calculated by accumulating the mean of every
window in a long running cumulative average. As time goes on, the metric
becomes less and less useful due to the accumulated history.
This patch reuses the same calculation done in load averages to make the
avg_lat metric more lively. Unlike load averages, the avg only advances
when a window elapses (due to an io). Idle periods extend the most
recent window. Bucketing is used to limit the history of avg_lat by
binding it to the window size. So, the window range for 1/exp (decay
rate) is [1 min, 2.5 min) when windows elapse immediately.
The current sample window size is exposed in the debug info to enable
calculation of the window range.
Signed-off-by: Dennis Zhou <dennisszhou@gmail.com>
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Consolidate two SP805 binding documents "arm,sp805.txt" and
"sp805-wdt.txt" into "arm,sp805.txt" that matches the naming of the
desired compatible string to be used
Signed-off-by: Ray Jui <ray.jui@broadcom.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Document support for the Watchdog Timer (WDT) Controller in the Renesas
R-Car E3 (R8A77990) SoC.
No driver update is needed.
Signed-off-by: Masaharu Hayakawa <masaharu.hayakawa.ry@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Update the document to describe the support of Camera Subsystem
on MSM8996/APQ8096.
Signed-off-by: Todor Tomov <todor.tomov@linaro.org>
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Use more logical clock names - similar to the names in documentation.
This will allow better handling of the clocks in the driver when support
for more hardware versions is added - equivalent clocks on different
hardware versions will have the same name.
Note: No dts is using this device (and clock names) yet.
CC: Rob Herring <robh+dt@kernel.org>
CC: Mark Rutland <mark.rutland@arm.com>
CC: devicetree@vger.kernel.org
Signed-off-by: Todor Tomov <todor.tomov@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The new format will be called V4L2_PIX_FMT_Y10P.
It is similar to the V4L2_PIX_FMT_SBGGR10P family formats
but V4L2_PIX_FMT_Y10P is a grayscale format.
Signed-off-by: Todor Tomov <todor.tomov@linaro.org>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The code will be called MEDIA_BUS_FMT_Y10_2X8_PADHI_LE.
It is similar to MEDIA_BUS_FMT_SBGGR10_2X8_PADHI_LE
but MEDIA_BUS_FMT_Y10_2X8_PADHI_LE describes grayscale
data.
Signed-off-by: Todor Tomov <todor.tomov@linaro.org>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
These formats are compressed 14-bit raw bayer formats with four different
pixel orders. They are similar to 10-bit variants. The formats added by
this patch are
V4L2_PIX_FMT_SBGGR14P
V4L2_PIX_FMT_SGBRG14P
V4L2_PIX_FMT_SGRBG14P
V4L2_PIX_FMT_SRGGB14P
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Todor Tomov <todor.tomov@linaro.org>
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Adding documentation for adgs1408/1409 multiplexer. The bindings
follow the standard SPI and mux bindings and do not require any
additional custom properties.
Signed-off-by: Mircea Caprioru <mircea.caprioru@analog.com>
Reviewed-by: Rob Herring <robh@kernel.org>
[peda: reword idle-state to non-array for singular mux controller]
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The uartlite devicetree binding was missed out.
Add the binding documentation for uartlite that is already in use.
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Describe interrupts property in more detail, especially when there are
more than one interrupt.
Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The systems of type MSN21xx, MSN201x have a slight difference from the
default reset cause bits description, it uses reset_hotswap_or_halt
instead of reset_hotswap_or_wd. New attribute is documented.
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
After IPv4 packets are forwarded, the priority of the corresponding SKB
is updated according to the TOS field of IPv4 header. This overrides any
prioritization done earlier by e.g. an skbedit action or ingress-qos-map
defined at a vlan device.
Such overriding may not always be desirable. Even if the packet ends up
being routed, which implies this is an L3 network node, an administrator
may wish to preserve whatever prioritization was done earlier on in the
pipeline.
Therefore introduce a sysctl that controls this behavior. Keep the
default value at 1 to maintain backward-compatible behavior.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add overline heading adornment to document title in order to comply
with kernel doc requirements.
Fixes: 60b9131 staging: fsl-mc: Convert documentation to rst format
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds SDHI support for the R8A77990 SoC (R-Car E3). No driver changes
needed for anything except HS400 which we will enable separately later.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Commit 59b356ffd0 ("mtd: m25p80: restore the status of SPI flash when
exiting") is the latest from a long history of attempts to add reboot
handling to handle stateful addressing modes on SPI flash. Some prior
mostly-related discussions:
http://lists.infradead.org/pipermail/linux-mtd/2013-March/046343.html
[PATCH 1/3] mtd: m25p80: utilize dedicated 4-byte addressing commands
http://lists.infradead.org/pipermail/barebox/2014-September/020682.html
[RFC] MTD m25p80 3-byte addressing and boot problem
http://lists.infradead.org/pipermail/linux-mtd/2015-February/057683.html
[PATCH 2/2] m25p80: if supported put chip to deep power down if not used
Previously, attempts to add reboot-time software reset handling were
rejected, but the latest attempt was not.
Quick summary of the problem:
Some systems (e.g., boot ROM or bootloader) assume that they can read
initial boot code from their SPI flash using 3-byte addressing. If the
flash is left in 4-byte mode after reset, these systems won't boot. The
above patch provided a shutdown/remove hook to attempt to reset the
addressing mode before we reboot. Notably, this patch misses out on
huge classes of unexpected reboots (e.g., crashes, watchdog resets).
Unfortunately, it is essentially impossible to solve this problem 100%:
if your system doesn't know how to reset the SPI flash to power-on
defaults at initialization time, no amount of software can really rescue
you -- there will always be a chance of some unexpected reset that
leaves your flash in an addressing mode that your boot sequence didn't
expect.
While it is not directly harmful to perform hacks like the
aforementioned commit on all 4-byte addressing flash, a
properly-designed system should not need the hack -- and in fact,
providing this hack may mask the fact that a given system is indeed
broken. So this patch attempts to apply this unsound hack more narrowly,
providing a strong suggestion to developers and system designers that
this is truly a hack. With luck, system designers can catch their errors
early on in their development cycle, rather than applying this hack long
term. But apparently enough systems are out in the wild that we still
have to provide this hack.
Document a new device tree property to denote systems that do not have a
proper hardware (or software) reset mechanism, and apply the hack (with
a loud warning) only in this case.
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
standard. LEDs and power button for the rk3399 firefly and removal of
some deprecated type-c properties from the rk3399 devicetree.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAltfHXEQHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgepyB/9HJZvneyadfomxhywbflJ8wkZj4WWfHDNG
79hwcg33EBcP2+vRkTeYypkurmhZdv+sSF6h1sLUBmtFNuapzd7xlI7FW+NAwwgl
6UFU4DtiC2E0b9ljrCL1WQH34BEVpSyaENO7EF1gR8CvZAnb4BzRgzDxfAczbQlH
6uBRzfuHooW/zHrbLxMxzkMbeHlU7m8i3/F2E3Uftxy5/qHUNmFGNcOl0bCpT/i6
gS1QKIBAMmQ6yaNwrwG6GmPPampv2jXGUCNFAlCNkLPjKY0Ri7XdBq0k91sx78YT
bP7k8Qd+TANMZgHB+mHPhgupMDur8KL+hn5I+MO3DItfn3rUW4EL
=0BU+
-----END PGP SIGNATURE-----
Merge tag 'v4.19-rockchip-dts64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt
A new board, the Vamrs Ficus using the rk3399 and followin the 96boards
standard. LEDs and power button for the rk3399 firefly and removal of
some deprecated type-c properties from the rk3399 devicetree.
* tag 'v4.19-rockchip-dts64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: add led support for Firefly-RK3399
arm64: dts: rockchip: remove deprecated Type-C PHY properties on rk3399
arm64: dts: rockchip: add power button support for Firefly-RK3399
arm64: dts: rockchip: drop out-of-tree properties from rk3399-ficus regulator
arm64: dts: rockchip: add voltage properties for vcc3v3_pcie on rk3399 ficus
arm64: dts: rockchip: add USB 2.0 and 3.0 support on Ficus board
arm64: dts: rockchip: add 96boards RK3399 Ficus board
dt-bindings: Add vendor prefix for Vamrs Ltd.
Signed-off-by: Olof Johansson <olof@lixom.net>
A bit larger this time around, due to introduction of "dpu1" support
for the display controller in sdm845 and beyond. This has been on
list and undergoing refactoring since Feb (going from ~110kloc to
~30kloc), and all my review complaints have been addressed, so I'd be
happy to see this upstream so further feature work can procede on top
of upstream.
Also includes the gpu coredump support, which should be useful for
debugging gpu crashes. And various other misc fixes and such.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGv-8y3zguY0Mj1vh=o+vrv_bJ8AwZ96wBXYPvMeQT2XcA@mail.gmail.com
This patch adds bindings for wcd9335 audio codec which can support both SLIMbus
and I2S/I2C interface.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
The integration of the Designware SPI controller on Microsemi SoCs requires
an extra register set to be able to give the IP control of the SPI
interface.
Cc: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
OPAL firmware provides the facility for some groups of sensors to be
enabled/disabled at runtime to give the user the option of using the
system resources for collecting these sensors or not.
For example, on POWER9 systems, the On Chip Controller (OCC) gathers
various system and chip level sensors and maintains their values in
main memory.
This patch provides support for enabling/disabling the sensor groups
like power, temperature, current and voltage.
Signed-off-by: Shilpasri G Bhat <shilpa.bhat@linux.vnet.ibm.com>
[stewart@linux.vnet.ibm.com: Commit message]
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
There are GLINK clients who open the same channel on multiple GLINK
links. These clients need a way to distinguish which remoteproc they
are communicating to. Add a label property to identify the edge this
node represents.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Chris Lew <clew@codeaurora.org>
Signed-off-by: Arun Kumar Neelakantam <aneela@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Since handling is abstracted in this driver, we need to add resin entry
in id table along with pwrkey_data.
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
In order to support resin thru the pwrkey driver (they are very
similar in nature) we need to abstract the handling in this driver.
First we abstract pull_up_bit and status_bit along in driver data.
The event code sent for key events is quiried from DT.
Since the device can be child of pon lookup regmap and reg from
parent if lookup fails (we are child).
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
- must be enabled via module parameter hpage=1
- cannot be used together with nested
- does support migration
- does support hugetlbfs
- no THP yet
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQIcBAABAgAGBQJbX4AwAAoJEBF7vIC1phx85eMP/ifsNHwqfAOrZBdlJuLVPla5
47J8iY4i4DOKGhKI4YOTcJQhn1izKZhECXS8d8hghB/sQUCE2CLVr1X/r1Udy2Pq
bpKG4apYtcJZBF6qn7yDMjBGkIRK4OCBD1pkuKEq2NyvUgPsHUVUgpuq2gngMTBk
ZN9MIfRQMdIEJsT389D6T9as0lwABJ0MJap5AudkQwguN2dDhQGeZv8l0QYV8C2I
WqRI2VsI1QEo3cJr1lJ5li/F9fC7q0l6QwlvPVocIHJAnq01zJvOekeAgQ4hzz16
JIoQckJq8m4d4PqZ7aWmAaMEemoQ9llmCavovspJNtFT79jho6cWWtBEvq+t0GLQ
qTsG9Yi20hONZMWAw+JIdSdOuFMD0HCpOWdUtSMjENFRbr8LLHUr91dGIxRLjF8Z
gv3vDJrbGzCQ+b9qPA8SrAN7U3VNCZG384MEmobwTuv5hxOopWp6chcK7RCriV/m
7cFDfO7+2pZymdW7D4DWlFiZl4mWpwOxip32C9tCt0CQveqeYSZsb5Qb9Pe+50vr
JhpB74UL79Wffvd65InGlu5jx1SdGG0QAzmBOkdOsAhX+0WMmXRB1ddn4whu7HPU
ssNtdKgLt9KkM/kIsB9RC/YLvUFK1lBVHrfnzUmLw3CBHP3QeO+V+arLwdVLVDjV
PA/LPECBWtGtQtxGWb2H
=Y0Wl
-----END PGP SIGNATURE-----
Merge tag 'hlp_stage1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into kvms390/next
KVM: s390: initial host large page support
- must be enabled via module parameter hpage=1
- cannot be used together with nested
- does support migration
- does support hugetlbfs
- no THP yet
General KVM huge page support on s390 has to be enabled via the
kvm.hpage module parameter. Either nested or hpage can be enabled, as
we currently do not support vSIE for huge backed guests. Once the vSIE
support is added we will either drop the parameter or enable it as
default.
For a guest the feature has to be enabled through the new
KVM_CAP_S390_HPAGE_1M capability and the hpage module
parameter. Enabling it means that cmm can't be enabled for the vm and
disables pfmf and storage key interpretation.
This is due to the fact that in some cases, in upcoming patches, we
have to split huge pages in the guest mapping to be able to set more
granular memory protection on 4k pages. These split pages have fake
page tables that are not visible to the Linux memory management which
subsequently will not manage its PGSTEs, while the SIE will. Disabling
these features lets us manage PGSTE data in a consistent matter and
solve that problem.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
There are a number of other ioctls that aren't used anywhere
inside the Kernel tree.
Get rid of them.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
There are a number of other ioctls that aren't used anywhere
inside the Kernel tree.
Get rid of them.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The metadata low watermark threshold is set by the kernel. But the
kernel depends on userspace to extend the thinpool metadata device when
the threshold is crossed.
Since the metadata low watermark threshold is not visible to userspace,
upon receiving an event, userspace cannot tell that the kernel wants the
metadata device extended, instead of some other eventing condition.
Making it visible (but not settable) enables userspace to affirmatively
know the kernel is asking for a metadata device extension, by comparing
metadata_low_watermark against nr_free_blocks_metadata, also reported in
status.
Current solutions like dmeventd have their own thresholds for extending
the data and metadata devices, and both devices are checked against
their thresholds on each event. This lessens the value of the kernel-set
threshold, since userspace will either extend the metadata device sooner,
when receiving another event; or will receive the metadata lowater event
and do nothing, if dmeventd's threshold is less than the kernel's.
(This second case is dangerous. The metadata lowater event will not be
re-sent, so no further event will be generated before the metadata
device is out if space, unless some other event causes userspace to
recheck its thresholds.)
Signed-off-by: Andy Grover <agrover@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
While this ioctl is there at least since Kernel 2.6.12-rc2, it
was never used by any upstream driver.
Get rid of it.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Adds bindings for Snapdragon 845 display processing unit
Changes in v2:
- Use SoC specific compatibles for mdss and dpu (Rob Herring)
- Use assigned-clocks to set initial clock frequency (Rob Herring)
Changes in v3 (all suggested by Rob Herring):
- Rename mdss_phys to mdss
- Correct description for clocks/assigned-clocks
- Rename mdp_phys to mdp
- Rename vbif_phys to vbif
- Remove redundant interrupt-parent from mdss_mdp
- Fully specify 'ranges' and use relative reg address in mdss_mdp
Cc: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Rajesh Yadav <ryadav@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Adds mdp transfer time to msm dsi binding
Changes in v3:
- Added Rob's R-b
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Rajesh Yadav <ryadav@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
For hangs, dump copy out the contents of the buffer objects attached to the
guilty submission and print them in the crash dump report.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
HLSQ, SP and TP registers are only accessible from a special
aperture and to make matters worse the aperture is blocked from
the CPU on targets that can support secure rendering. Luckily the
GPU hardware has its own purpose built register dumper that can
access the registers from the aperture. Add a5xx specific code
to program the crashdumper and retrieve the wayward registers
and dump them for the crash state.
Also, remove a block of registers the regular CPU accessible
list that aren't useful for debug which helps reduce the size
of the crash state file by a goodly amount.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Add the contents of each ringbuffer to the GPU state and dump the
data in the crash file encoded with ascii85. To save space only
the used portions of the ringbuffer are dumped.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Convert the format of the 'show' debugfs file and the crash
dump to a format resembling YAML. This should be easier to
parse and be more flexible for future changes and expansions.
v2: Use a standard .rst for the msm crashdump documentation
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Not a big pull request with only 37 non-merge commits, most of which
are touching dwc2 (74% of the changes).
The most important changes are dwc2's support for uframe scheduling
and its endian-agnostic readl/writel wrappers.
From dwc3 side we have a special new glue layer for Synopsys HAPS
which will help Synopsys running FPGA validation using our upstream
driver. We also have the beginnings of dual-role support for Intel
Merrifield platform.
Apart from these, just a series of non-critical changes.
-----BEGIN PGP SIGNATURE-----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=HiNz
-----END PGP SIGNATURE-----
Merge tag 'usb-for-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next
Felipe writes:
usb: changes for v4.19
Not a big pull request with only 37 non-merge commits, most of which
are touching dwc2 (74% of the changes).
The most important changes are dwc2's support for uframe scheduling
and its endian-agnostic readl/writel wrappers.
From dwc3 side we have a special new glue layer for Synopsys HAPS
which will help Synopsys running FPGA validation using our upstream
driver. We also have the beginnings of dual-role support for Intel
Merrifield platform.
Apart from these, just a series of non-critical changes.
Add description of 'snps,incr-burst-type-adjustment' to binding
so that configuring devicetree.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
Signed-off-by: Pengbo Mu <pengbo.mu@nxp.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
This patch adds the dmaenginem_async_device_register for DMA code.
Use the Devres to call the release for the DMA engine driver.
Signed-off-by: Huang Shijie <sjhuang@iluvatar.ai>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The superblock timestamp fields were enlarged by u8 to be 40 bits wide.
Update the documentation to reflect this.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Create a new top-level section for documentation of filesystem usage,
on-disk format information, and anything else.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This patch adds mask parameter to define IRQ mux field.
This field could vary depend of IRQ mux selection register.
This parameter is needed if the mask is different of 0xf.
Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
In case the exti line is not in line with the bank number (that is the case
when there is an hole between two banks, for example GPIOK and then GPIOZ),
use "st,bank-ioport" DT property to get the right exti line.
Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Import the chapter about extended attributes from the on-disk format wiki
page into the kernel documentation.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Import the chapter about directory layout from the on-disk format wiki
page into the kernel documentation.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Import the chapter about inode data fork from the on-disk format wiki
page into the kernel documentation.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Import the chapter about inodes from the on-disk format wiki
page into the kernel documentation.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Import the chapter about the journal from the on-disk format wiki
page into the kernel documentation.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Import the chapter about multi-mount protection from the on-disk format
wiki page into the kernel documentation.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Import the chapter about bitmaps from the on-disk format wiki
page into the kernel documentation.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Import the chapter about group descriptors from the on-disk format wiki
page into the kernel documentation.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Import the chapter about superblocks from the on-disk format wiki
page into the kernel documentation.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Import the chapter about high level design from the on-disk format wiki
page into the kernel documentation.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Create the basic structure of the "new" data structures & algorithms
book to be ported over from the on-disk format wiki, and then start by
pulling in the introductory information.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Convert the existing ext4 documentation into rst format and link it in
with the rest of the kernel documentation.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Move Documentation/filesystems/ext4.txt into
Documentation/filesystems/ext4/ext4.rst in preparation for adding more
ext4 documentation.
Note that the documentation isn't in rst format yet, but as it's not
linked from anywhere it won't cause build errors.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
New property: 'address-width' which allows to specify the number of
addressing bits. Up until now we only could choose one of the defined
models and rely on the flags specified in its corresponding chip data
structure.
-----BEGIN PGP SIGNATURE-----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=x4cW
-----END PGP SIGNATURE-----
Merge tag 'at24-4.19-updates-for-wolfram' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into i2c/for-4.19
at24: updates for v4.19
New property: 'address-width' which allows to specify the number of
addressing bits. Up until now we only could choose one of the defined
models and rely on the flags specified in its corresponding chip data
structure.
Being able to find the numa_node for a device is useful for userspace
drivers (DPDK) and also for diagnosing performance issues. This makes
vmbus similar to pci.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
*) Add new PHY driver for GEN3 PCIe PHY on Renesas R-Car
*) Add new PHY driver for PCIe PHY on Broadcom's Stingray SoC
*) Enable battery charging in Mediatek T-PHY
*) Switch to SPDX identifier in Marvell PHY drivers
*) Fix compilation warning in phy-qcom-usb-hs.c
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=V2N7
-----END PGP SIGNATURE-----
Merge tag 'phy-for-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-next
Kishon writes:
phy: for 4.19
*) Add new PHY driver for GEN3 PCIe PHY on Renesas R-Car
*) Add new PHY driver for PCIe PHY on Broadcom's Stingray SoC
*) Enable battery charging in Mediatek T-PHY
*) Switch to SPDX identifier in Marvell PHY drivers
*) Fix compilation warning in phy-qcom-usb-hs.c
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
We want to create common code for v2 of the TSENS IP block that is used in
a large number of Qualcomm SoCs. "qcom,tsens-v2" should be able to handle
most of the common functionality start with a common get_temp() function.
It is also necessary to split out the memory regions for the TM and SROT
register banks because their offsets are not constant across SoC families.
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tested-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
New bindings (using a syscon) are available for AP806 and CP110
compatibles. Add a reference to these files from the original
documentation.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Explain the thermal bindings now that the thermal IP is described being
inside of a system controller. Add a reference to the thermal-zone node.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
CP110 master/slave DT files have been merged in a DT de-duplication work
merged in v4.16. Update the syscon documentation accordingly to match
the current state of the DT nodes.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Explain the thermal bindings now that the thermal IP is described being
inside of a system controller. Add a reference to the thermal-zone node.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
There are multiple system controllers in CP110. Because all syscon nodes
use the same compatible, it is pertinent to use this same file to list
IPs inside it. Thus, change the header to be more generic, and align
with AP806 file.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
There are multiple system controllers in AP806. Because all syscon nodes
use the same compatible, it is pertinent to use this same file to list
IPs inside it. Thus, change the header to be more generic.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
There is no need to give numbers to system controllers inside the
documentation as the syscons use the same compatibles. Furthermore, this
approach does not scale very well and would force the creation of a new
file each time a new syscon is added in the device tree.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Add a writeup about how PCI host bridges should be described in ACPI
using PNP0A03/PNP0A08 devices, PNP0C02 devices, and the MCFG table.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Sinan Kaya <okaya@kernel.org>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
When using external metadata device and internal hash, recalculate the
checksums when the device is created - so that dm-integrity doesn't
have to overwrite the device. The superblock stores the last position
when the recalculation ended, so that it is properly restarted.
Integrity tags that haven't been recalculated yet are ignored.
Also bump the target version.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Add a new class for dm-delay that delays flush requests. Previously,
flushes were delayed as writes, but it caused problems if the user
needed to create a device with one or a few slow sectors for the purpose
of testing - all flushes would be forwarded to this device and delayed,
and that skews the test results. Fix this by allowing to select 0 delay
for flushes.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Documentation/device-mapper-/thin-provisioning.txt's "Status" section no
longer reflected the current fitness level of DM thin-provisioning.
That is, DM thinp is no longer "EXPERIMENTAL". It has since seen
considerable improvement, has been fairly widely deployed and has
performed in a robust manner.
Update Documentation to dispel concern raised by potential DM thinp
users.
Reported-by: Drew Hastings <dhastings@crucialwebhost.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Add device tree binding documentation for the OV2680 camera sensor.
[Sakari Ailus: Squash MAINTAINERS entry from Rui]
CC: devicetree@vger.kernel.org
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Later qcom chips support v2 of the prng, which exposes an EE
(Execution Environment) for OS to use so add new compatible
qcom,prng-ee for this.
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Now that we are adding new driver for prng in crypto, move the
binding as well.
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This was kept just for backward compatibility. Solves this warning:
media.h.rst:6: WARNING: undefined label: media-ent-f-dtv-decoder (if the link has no caption the label must precede a section header)
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Fix these warnings when building the documentation:
media.h.rst:6: WARNING: undefined label: media-ent-f-dv-decoder (if the link has no caption the label must precede a section header)
media.h.rst:6: WARNING: undefined label: media-ent-f-dv-encoder (if the link has no caption the label must precede a section header)
media.h.rst:6: WARNING: undefined label: media-ent-f-dv-decoder (if the link has no caption the label must precede a section header)
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
No upstream drivers use it. It doesn't make any sense to have
a compat32 code for something that nobody uses upstream.
Reported-by: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Some decoders and encoders can potentially have more than one source pad,
so update the description to say 'at least one source pad'.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Add compatible string and new attributes to support the Xilinx CAN FD
core.
Unlike the previously documented Xilinx CAN cores, the CAN FD core has
TX mailboxes instead of TX FIFO, and optionally RX mailboxes instead of
RX FIFO (selected at core generation time, not switchable at runtime).
Add "tx-mailbox-count" and "rx-mailbox-count" to specify the mailbox
counts instead of reusing "tx-fifo-depth" and "rx-fifo-depth".
The RX FIFO depth is constant 32, but allow it to be specified via
"rx-fifo-depth" to match DT usage with Zynq CAN (which has constant RX
FIFO of depth of 64).
v2: Remove unnecessary "rx-mode" DT property.
Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Cc: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The UCAN driver supports the microcontroller-based USB/CAN
adapters from Theobroma Systems. There are two form-factors
that run essentially the same firmware:
* Seal: standalone USB stick ( https://www.theobroma-systems.com/seal )
* Mule: integrated on the PCB of various System-on-Modules from
Theobroma Systems like the A31-µQ7 and the RK3399-Q7
( https://www.theobroma-systems.com/rk3399-q7 )
The USB wire protocol has been designed to be as generic and
hardware-indendent as possible in the hope of being useful for
implementation on other microcontrollers.
Signed-off-by: Martin Elshuber <martin.elshuber@theobroma-systems.com>
Signed-off-by: Jakob Unterwurzacher <jakob.unterwurzacher@theobroma-systems.com>
Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Acked-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
This allows the default behavior to be controlled by a kernel config
option instead of changing the commandline for the kernel to include
"iommu.passthrough=on" or "iommu=pt" on machines where this is desired.
Likewise, for machines where this config option is enabled, it can be
disabled at boot time with "iommu.passthrough=off" or "iommu=nopt".
Also corrected iommu=pt documentation for IA-64, since it has no code that
parses iommu= at all.
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
On ams AS3722, power on when AC OK is enabled by default.
Making this option as disable by default and enable only
when platform need this explicitly.
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Reviewed-by: Bibek Basu <bbasu@nvidia.com>
Tested-by: Bibek Basu <bbasu@nvidia.com>
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
The AXP806 has three operation modes:
- master mode: The PMIC is the first or only AXP PMIC in the system,
but is not in charge of power management, i.e. only
provides regulator functions.
- slave mode: The PMIC is the second AXP PMIC in the system, chained
to the first, or master, one.
- self-working mode: The PMIC is the only AXP PMIC in the system, and
is in charge of power sequencing.
The functional differences between these modes can be found in the
"Control and Operation" chapter of the AXP806 (in Chinese) and AXP805
(in English) datasheets. These include how the PMIC responds to external
signals, whether it takes an external voltage reference or uses its own,
and whether the EN/PWRON pin functions as an enable switch or power button.
We already support both slave and master mode. This patch adds a property
for describing the self-working mode, and reworks the description for
the mode properties.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Icenowy Zheng <icenowy@aosc.io>
Tested-by: Icenowy Zheng <icenowy@aosc.io>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
This patch fixes documentation of tps65911 because its list of
compatible regulators contains wrongly vdd3 instead of vdd2.
Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Immutable Branch which moves the cros_ec_i2c and cros_ec_spi
transport drivers from mfd to platform/chrome. Changes in arm are a simple
rename in defconfigs. Change in input is a rename in help text.
-----BEGIN PGP SIGNATURE-----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=EhHj
-----END PGP SIGNATURE-----
Merge branches 'ib-mfd-4.19', 'ib-mfd-gpio-pinctrl-4.19', 'ib-mfd-i915-media-platform-4.19' and 'ib-mfd-regulator-4.19', tag 'ib-platform-chrome-mfd-move-cros-ec-transport-for-4.19' into ibs-for-mfd-merged
Immutable branch (mfd, chrome) due for the v4.19 window
Immutable Branch which moves the cros_ec_i2c and cros_ec_spi
transport drivers from mfd to platform/chrome. Changes in arm are a simple
rename in defconfigs. Change in input is a rename in help text.
The majority of files in the kernel documentation index use
capitalisation for all words, especially the shorter ones. BPF docs
better fit in with the rest of the documentation if the heading is all
capitalised.
Capitalise document heading.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Recently bpf docs were converted to RST format. The new files were not
added to the top level toctree. This causes build system to emit a
warning of type
WARNING: document isn't included in any toctree
Add bpf/index.rst to Documentation/index.rst
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Recently bpf/ docs were converted to us RST format. bp/index.rst was
created out of README but toctree was not added to include files within
Documentation/bpf/
Add toctree to Documentation/bpf/index.rst
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Recently bpf/ docs were converted to use RST format. 'README.rst' was
created but in order to fit in with the Sphinx build system this file
should be named 'index.rst'. Rename file, fixes to integrate into
Sphinx build system in following patches.
docs: Rename Documentation/bpf/README.rst to Documentation/bpf/index.rst
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
File 'Documentation/networking/netdev-FAQ.txt' has been converted to RST
format. We should update all links/references to point to the new file.
Update references to netdev-FAQ
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: David S. Miller <davem@davemloft.net>
Preferred kernel docs format is now restructured text. Convert
netdev-FAQ.txt to restructured text.
- Add SPDX license identifier.
- Change file heading 'Information you need to know about netdev' to
'netdev FAQ' to better suit displayed index (in HTML).
- Change question/answer layout to suit rst. Copy format in
Documentation/bpf/bpf_devel_QA.rst
- Fix indentation of code snippets
- If multiple consecutive URLs appear put them in a list (to maintain
whitespace).
- Use uniform spelling of 'bug fix' throughout document (not bugfix or
bug-fix).
- Add double back ticks to 'net' and 'net-next' when referring to the
trees.
- Use rst references for Documentation/ links.
- Add rst label 'netdev-FAQ' for referencing by other docs files.
- Remove stale entry from Documentation/networking/00-INDEX
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: David S. Miller <davem@davemloft.net>
In preparation to convert Documentation/network/netdev-FAQ.rst to
restructured text format. We would like to be able to reference 'the
canonical patch format' section.
Add rest label: 'the_canonical_patch_format'.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds 'nr_hugepages_mempolicy' parameter which is currently missing
in 'vm.txt' file. It also contains a short description of 'nr_hugepages_mempolicy'
parameter.
Signed-off-by: Prashant Dhamdhere <pdhamdhe@redhat.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
This patch includes the kernel-hacking translation in Italian (both
hacking.rst and locking.rst).
It adds also the anchors for the english kernel-hacking documents.
Signed-off-by: Federico Vaga <federico.vaga@vaga.pv.it>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Two jump tags were misspelled, leading to non-working cross-reference
links.
Reported-by: Federico Vaga <federico.vaga@vaga.pv.it>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
The name of the directory for per-cpu function statistics
is trace_stat, not trace_stats.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
- add EINT support
- add gpio-ranges property to pinctrl
- add earlycon to rfb1 to find boot errros more easily
- fix uart clock
- add iommu and smi bindings
- mt6797:
- add support for the 96 board x20 development board
- fix cooling-cells of mt7622 and mt8173
-----BEGIN PGP SIGNATURE-----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=+G4b
-----END PGP SIGNATURE-----
Merge tag 'v4.18-next-dts64' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into next/dt
- mt7622:
- add EINT support
- add gpio-ranges property to pinctrl
- add earlycon to rfb1 to find boot errros more easily
- fix uart clock
- add iommu and smi bindings
- mt6797:
- add support for the 96 board x20 development board
- fix cooling-cells of mt7622 and mt8173
* tag 'v4.18-next-dts64' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
arm64: dts: Add Mediatek X20 Development Board support
dt-bindings: arm: mediatek: Document Mediatek X20 Development Board
dt-bindings: mediatek: Add binding for mt2712 IOMMU and SMI
arm64: dts: mt7622: update a clock property for UART0
arm64: dts: mt7622: add earlycon to mt7622-rfb1 board
arm64: dts: mt7622: use gpio-ranges to pinctrl device
arm64: dts: mediatek: Add missing cooling device properties for CPUs
arm64: dts: mt7622: add EINT support to pinctrl
Signed-off-by: Olof Johansson <olof@lixom.net>
The binding for the USB PHY went thru before the driver. However the
new version of the driver now use the PHY core support for reset, and
this expect the reset to be named "phy". So remove the "usb-" prefix
from the the reset names.
Signed-off-by: Alban Bedel <albeu@free.fr>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/15282/
Cc: linux-kernel@vger.kernel.org
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Antony Pavlov <antonynpavlov@gmail.com>
Cc: devicetree@vger.kernel.org
Cc: linux-mips@linux-mips.org
The barrier mount options have been no-ops and deprecated since
4cf4573 xfs: deprecate barrier/nobarrier mount option
i.e. kernel 4.10 / December 2016, with a stated deprecation schedule
after v4.15. Should be fair game to remove them now.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Here are a number of USB fixes and new device ids for 4.18-rc7.
The largest number are a bunch of gadget driver fixes that got delayed
in being submitted earlier due to vacation schedules, but nothing really
huge is present in them. There are some new device ids and some PHY
driver fixes that were connected to some USB ones. Full details are in
the shortlog.
All have been in linux-next for a while with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCW1nXnQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymoWACfTbc0TF6u9hNALIS9nsgLxevZLjYAnA5RJ12y
TTBeXMIAvCUKILAXPQok
=spWc
-----END PGP SIGNATURE-----
Merge tag 'usb-4.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are a number of USB fixes and new device ids for 4.18-rc7.
The largest number are a bunch of gadget driver fixes that got delayed
in being submitted earlier due to vacation schedules, but nothing
really huge is present in them. There are some new device ids and some
PHY driver fixes that were connected to some USB ones. Full details
are in the shortlog.
All have been in linux-next for a while with no reported issues"
* tag 'usb-4.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (28 commits)
usb: core: handle hub C_PORT_OVER_CURRENT condition
usb: xhci: Fix memory leak in xhci_endpoint_reset()
usb: typec: tcpm: Fix sink PDO starting index for PPS APDO selection
usb: gadget: f_fs: Only return delayed status when len is 0
usb: gadget: f_uac2: fix endianness of 'struct cntrl_*_lay3'
usb: dwc2: Fix inefficient copy of unaligned buffers
usb: dwc2: Fix DMA alignment to start at allocated boundary
usb: dwc3: rockchip: Fix PHY documentation links.
tools: usb: ffs-test: Fix build on big endian systems
usb: gadget: aspeed: Workaround memory ordering issue
usb: dwc3: gadget: remove redundant variable maxpacket
usb: dwc2: avoid NULL dereferences
usb/phy: fix PPC64 build errors in phy-fsl-usb.c
usb: dwc2: host: do not delay retries for CONTROL IN transfers
usb: gadget: u_audio: protect stream runtime fields with stream spinlock
usb: gadget: u_audio: remove cached period bytes value
usb: gadget: u_audio: remove caching of stream buffer parameters
usb: gadget: u_audio: update hw_ptr in iso_complete after data copied
usb: gadget: u_audio: fix pcm/card naming in g_audio_setup()
usb: gadget: f_uac2: fix error handling in afunc_bind (again)
...
The example code in dpcm.rst contains an open code calling
snd_mask_set(), and this can be better represented with
params_set_format() instead. This automatically fixes the sparse
warning about snd_pcm_format_t handling, too.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Document support for the sound modules in the Renesas M3-N (r8a77965)
SoC.
No driver update is needed.
Signed-off-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove the amlogic prefix in front of the generic properties and change
the card 'name' property to 'model'
Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
When utilising multiple instantiations of a UVC gadget on a composite
device, there is no clear method to link a particular configuration to
its respective video node.
Provide a means for identifying the correct video node by exposing the
name of the function configuration through sysfs.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
This patch adds bindings of new "System Timer" on Mediatek SoCs.
Remove RTC clock in the same time because it is not used by
both "General Purpose Timer" and "System Timer" now.
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
systrace used for tracing for Android systems has carried a patch for
many years in the Android tree that traces when the cpufreq limits
change. With the help of this information, systrace can know when the
policy limits change and can visually display the data. Lets add
upstream support for the same.
Signed-off-by: Ruchi Kandoi <kandoiruchi@google.com>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The Exynos5440 (quad-core A15 with GMAC, PCIe, SATA) was targeting
server platforms but it did not make it to the market really. There are
no development boards with it and probably there are no real products
neither. The development for Exynos5440 ended in 2013 and since then
the platform is in maintenance mode.
Removing Exynos5440 makes our life slightly easier: less maintenance,
smaller code, reduced number of quirks, no need to preserve DTB
backward-compatibility.
The Device Tree sources and some of the drivers for Exynos5440 were
already removed. This removes remaining drivers.
-----BEGIN PGP SIGNATURE-----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=3x4x
-----END PGP SIGNATURE-----
Merge tag 'samsung-drivers-exynos5440-4.19' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/drivers
Exynos5440 drivers removal
The Exynos5440 (quad-core A15 with GMAC, PCIe, SATA) was targeting
server platforms but it did not make it to the market really. There are
no development boards with it and probably there are no real products
neither. The development for Exynos5440 ended in 2013 and since then
the platform is in maintenance mode.
Removing Exynos5440 makes our life slightly easier: less maintenance,
smaller code, reduced number of quirks, no need to preserve DTB
backward-compatibility.
The Device Tree sources and some of the drivers for Exynos5440 were
already removed. This removes remaining drivers.
* tag 'samsung-drivers-exynos5440-4.19' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
usb: host: exynos: Remove support for Exynos5440
clk: samsung: Remove support for Exynos5440
cpufreq: exynos: Remove support for Exynos5440
ata: ahci-platform: Remove support for Exynos5440
Signed-off-by: Olof Johansson <olof@lixom.net>
Moves DPAA2 DPIO driver from staging to fsl/soc
Adds multiple-pin support to QE gpio driver
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=9CHI
-----END PGP SIGNATURE-----
Merge tag 'soc-fsl-for-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux into next/drivers
Various updates to soc/fsl for 4.19
Moves DPAA2 DPIO driver from staging to fsl/soc
Adds multiple-pin support to QE gpio driver
* tag 'soc-fsl-for-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux:
soc: fsl: cleanup Kconfig menu
soc: fsl: dpio: Convert DPIO documentation to .rst
staging: fsl-mc: Remove remaining files
staging: fsl-mc: Move DPIO from staging to drivers/soc/fsl
staging: fsl-dpaa2: eth: move generic FD defines to DPIO
soc: fsl: qe: gpio: Add qe_gpio_set_multiple
Signed-off-by: Olof Johansson <olof@lixom.net>
There's been work for this release cycles in both the SRAM controller
driver in order to support more SoCs, as part of our VPU work, but also to
enable the EMAC on the A64 (that needs to poke at registers within the same
register space).
Some work has been needed too to represent the bus to the display engine
controllers that all need an SRAM to be mapped to the CPU to be able to
access those controllers' registers.
-----BEGIN PGP SIGNATURE-----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=NuX/
-----END PGP SIGNATURE-----
Merge tag 'sunxi-drivers-for-4.19' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/drivers
Allwinner drivers changes for 4.19
There's been work for this release cycles in both the SRAM controller
driver in order to support more SoCs, as part of our VPU work, but also to
enable the EMAC on the A64 (that needs to poke at registers within the same
register space).
Some work has been needed too to represent the bus to the display engine
controllers that all need an SRAM to be mapped to the CPU to be able to
access those controllers' registers.
* tag 'sunxi-drivers-for-4.19' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
soc: sunxi: Add the A13, A23 and H3 system control compatibles
drivers: soc: sunxi: Add support for the C1 SRAM region
dt-bindings: sram: sunxi: Populate valid sections compatibles
dt-bindings: sram: sunxi: Add A13, A20, A23 and H3 dedicated bindings
soc: sunxi: sram: Add dt match for the A10 system-control compatible
dt-bindings: sram: sunxi: Introduce new A10 binding for system-control
bus: add bus driver for accessing Allwinner A64 DE2
dt-bindings: add binding for the Allwinner A64 DE2 bus
soc: sunxi: sram: Add updated compatible string for A64 system control
dt-bindings: sram: Rename A64 SRAM controller compatible
soc: sunxi: export a regmap for EMAC clock reg on A64
Signed-off-by: Olof Johansson <olof@lixom.net>
Some interesting changes, especially:
- MMC support for the H6
- PMIC support for the PineH64
- HDMI simplefb support for the A64
- PWM support for the A64
- New board: Pinebook, Amarula A64-Relic
-----BEGIN PGP SIGNATURE-----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=MH+c
-----END PGP SIGNATURE-----
Merge tag 'sunxi-dt64-for-4.19' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt
Allwinner arm64 DT changes for 4.19
Some interesting changes, especially:
- MMC support for the H6
- PMIC support for the PineH64
- HDMI simplefb support for the A64
- PWM support for the A64
- New board: Pinebook, Amarula A64-Relic
* tag 'sunxi-dt64-for-4.19' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (22 commits)
arm64: allwinner: h6: enable MMC0/2 on Pine H64
arm64: allwinner: h6: add device tree nodes for MMC controllers
dt-binding: mmc: sunxi: add H6 compatible (with A64 fallback)
arm64: dts: allwinner: a64: Remove unused address-cells/size-cells of dwmac-sun8i
arm64: dts: allwinner: h6: enable AXP805 PMIC on Pine H64
arm64: dts: allwinner: h6: Use macros for R_CCU clock and reset indices
arm64: dts: allwinner: a64: add HDMI regulator to all DTs' simplefb_hdmi
arm64: dts: allwinner: a64: add device tree node for HDMI simplefb
arm64: dts: allwinner: a64: add necessary device tree nodes for DE2 CCU
arm64: dts: allwinner: h6: Add LED device nodes for Pine H64
arm64: allwinner: a64: allow laptops to wake up from lid
arm64: allwinner: a64: change TERES-I DLDO3's name to start with "vdd"
arm64: allwinner: a64-sopine: Add cd-gpios to mmc0 node
arm64: dts: allwinner: a64: add SRAM controller device tree node
arm64: dts: allwinner: add support for Pinebook
arm64: dts: allwinner: a64: Add PWM controllers
arm64: dts: allwinner: a64: add R_I2C controller
arm64: allwinner: a64-amarula-relic: Enable AP6330 WiFi support
arm64: allwinner: a64: Add RTC clock to phandle 32kHz external oscillator
arm64: allwinner: a64: Add Amarula A64-Relic initial support
...
Signed-off-by: Olof Johansson <olof@lixom.net>
There's a number of additions for the ARMv7 SoCs for this merge window, and
especially:
- Addition of the system controller for a number of SoCs, as part of the
VPU effort
- Addition of the R40 HDMI support
- Addition of the Mali GPU node for the A10
-----BEGIN PGP SIGNATURE-----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=3J2I
-----END PGP SIGNATURE-----
Merge tag 'sunxi-dt-for-4.19' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt
Allwinner DT changes for 4.19
There's a number of additions for the ARMv7 SoCs for this merge window, and
especially:
- Addition of the system controller for a number of SoCs, as part of the
VPU effort
- Addition of the R40 HDMI support
- Addition of the Mali GPU node for the A10
* tag 'sunxi-dt-for-4.19' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (21 commits)
ARM: dts: sun4i: Add GPU node
ARM: dts: sun5i: Fix the SRAM A3-A4 declaration
ARM: dts: sun8i: r40: Remove unused address-cells/size-cells of dwmac-sun8i
ARM: dts: sun8i: a83t: Remove unused address-cells/size-cells of dwmac-sun8i
dt-bindings: net: dwmac-sun8i: Remove unused address-cells/size-cells
ARM: dts: sun8i: h3: Add SRAM controller node and C1 SRAM region
ARM: dts: sun8i: a23-a33: Add SRAM controller node and C1 SRAM region
ARM: dts: sun7i: Add support for the C1 SRAM region with the SRAM controller
ARM: dts: sun5i: Add support for the C1 SRAM region with the SRAM controller
ARM: dts: sun7i: Use most-qualified system control compatibles
ARM: dts: sun5i: Use most-qualified system control compatibles
ARM: dts: sun4i: Switch to new system control compatible string
ARM: dts: sun8i: r40: Disable TCONs by default.
ARM: dts: sun8i: r40: Add missing TCON-TOP - TCON connections
ARM: dts: sun8i: r40: Remove fallback compatible for TCON TV
ARM: dts: sun8i: r40: Add mixer ids to TCON TOP
ARM: dts: sun8i: r40: Remove fallback display engine compatible
ARM: dts: sun8i: a83t: Add CPU regulator supplies for A83T boards
ARM: dts: sun8i: r40: Enable HDMI output on BananaPi M2 Ultra
ARM: dts: sun8i: r40: Add HDMI pipeline
...
Signed-off-by: Olof Johansson <olof@lixom.net>
With ti-sysc driver working for most use cases, we can start converting
the omap variant SoCs to use device tree data for the interconnect target
modules instead of the legacy hwmod platform data.
We start with omap4 l4 devices excluding the ones that still depend on
a reset controller driver like DSP MMU. And we don't yet convert the l4
ABE instance as that needs a bit more work.
We also add a proper interconnect hierarchy for the devices while at it
to make further work on genpd easier and to avoid most deferred probe
issues.
At this point we are not dropping any platform data, and we initially
still use it to validate the dts data. Then in later merge cycles we
can start dropping the related platform data.
-----BEGIN PGP SIGNATURE-----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=ATsi
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.19/dt-pt3-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt
Start using ti-sysc with device tree data for omap4 l4 devices
With ti-sysc driver working for most use cases, we can start converting
the omap variant SoCs to use device tree data for the interconnect target
modules instead of the legacy hwmod platform data.
We start with omap4 l4 devices excluding the ones that still depend on
a reset controller driver like DSP MMU. And we don't yet convert the l4
ABE instance as that needs a bit more work.
We also add a proper interconnect hierarchy for the devices while at it
to make further work on genpd easier and to avoid most deferred probe
issues.
At this point we are not dropping any platform data, and we initially
still use it to validate the dts data. Then in later merge cycles we
can start dropping the related platform data.
* tag 'omap-for-v4.19/dt-pt3-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: omap4: Add l4 ranges for 4460
ARM: dts: omap4: Move l4 child devices to probe them with ti-sysc
ARM: dts: omap4: Probe watchdog 3 with ti-sysc
ARM: dts: omap4: Add l4 interconnect hierarchy and ti-sysc data
dt-bindings: Update omap l4 binding for optional registers
Signed-off-by: Olof Johansson <olof@lixom.net>
- new SoC: S905W
- new boards: based on S905W: Amlogic P281, Oranth Tanix TX3 Mini
- AXG: add DT for new audio clock controller
-----BEGIN PGP SIGNATURE-----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=bHuf
-----END PGP SIGNATURE-----
Merge tag 'amlogic-dt64-2-1' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/dt
Amlogic 64-bit DT changes for v4.19, round 2
- new SoC: S905W
- new boards: based on S905W: Amlogic P281, Oranth Tanix TX3 Mini
- AXG: add DT for new audio clock controller
* tag 'amlogic-dt64-2-1' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
ARM64: dts: meson-gxl: add support for the Oranth Tanix TX3 Mini
ARM64: dts: meson-gxl: add support for the S905W SoC and the P281 board
dt-bindings: arm: amlogic: Add support for the Oranth Tanix TX3 Mini
dt-bindings: arm: amlogic: Add support for GXL S905W and the P281 board
dt-bindings: add vendor prefix for Shenzhen Oranth Technology Co., Ltd.
ARM64: dts: meson-axg: add the audio clock controller
clk: meson: expose GEN_CLK clkid
clk: meson-axg: add pcie and mipi clock bindings
dt-bindings: clock: add meson axg audio clock controller bindings
Signed-off-by: Olof Johansson <olof@lixom.net>
1. Add handling of external wakeup interrupts mask inside the pin
controller driver.
Existing solution is spread between the driver and machine code. The
machine code writes the mask but its value is taken from pin
controller driver.
This moves everything into pin controller driver allowing later to
remove the cross-subsystem interaction. Also this is a necessary
step for implementing later Suspend to RAM on ARMv8 Exynos5433.
2. Bring necessary suspend/resume callbacks for Exynos542x and
Exynos5260.
3. Document hidden requirement about one external wakeup interrupts
device node.
4. Minor documentation cleanups.
-----BEGIN PGP SIGNATURE-----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=a9XD
-----END PGP SIGNATURE-----
Merge tag 'samsung-pinctrl-4.19' of https://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/samsung into devel
Samsung pinctrl drivers changes for v4.19
1. Add handling of external wakeup interrupts mask inside the pin
controller driver.
Existing solution is spread between the driver and machine code. The
machine code writes the mask but its value is taken from pin
controller driver.
This moves everything into pin controller driver allowing later to
remove the cross-subsystem interaction. Also this is a necessary
step for implementing later Suspend to RAM on ARMv8 Exynos5433.
2. Bring necessary suspend/resume callbacks for Exynos542x and
Exynos5260.
3. Document hidden requirement about one external wakeup interrupts
device node.
4. Minor documentation cleanups.
'interrupt-parent' is often documented as part of define bindings, but
it is really outside the scope of a device binding. It's never required
in a given node as it is often inherited from a parent node. Or it can
be implicit if a parent node is an 'interrupt-controller' node. So
remove it from all the binding files.
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: devicetree@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
This fixes a spelling mistake.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Fix a couple of punctuation "typos" in the description of the
"choice" keyword.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Add a new pixelformat for the vicodec software codec using the
Fast Walsh Hadamard Transform.
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Add MEDIA_ENT_F_PROC_VIDEO_EN/DECODER to be used for the encoder
and decoder entities of codec hardware.
[mchehab+samsung@kernel.org: split description on two senteces by adding dots]
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Mention that IDs should not be hardcoded in applications and that the
entity name must be unique within the media topology.
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Make it clearer that the index starts at 0.
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Add a new function for digital video encoders such as HDMI transmitters.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The use of 'DTV' is very confusing since it normally refers to Digital
TV e.g. DVB etc.
Instead use 'DV' (Digital Video), which nicely corresponds to the
DV Timings API used to configure such receivers and transmitters.
We keep an alias to avoid breaking userspace applications.
Since this alias is only available if __KERNEL__ is *not* defined
(i.e. it is only available for userspace, not kernelspace), any
drivers that use it also have to be converted to the new define.
These drivers are adv7604, adv7842 and tda1997x.
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Document the new struct media_v2_entity 'flags' field.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Document the new struct media_v2_pad 'index' field.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
In order to debug the HDMI 5V line we need to add a new v5-gpios
property.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
There are also a couple of fixes that can wait for the coming merge
window.
Core new features
* Support for phase channels (used in time of flight sensors amongst
other things)
* Support for deep UV light channel modifier.
New Device Support
* AD4758 DAC
- New driver and dt bindings.
* adxl345
- Support the adxl375 +-200g part which is register compatible.
* isl29501 Time of flight sensor.
- New driver
* meson-saradc
- Support the Meson8m2 Socs - right now this is just an ID, but there will
be additional difference in future.
* mpu6050
- New ID for 6515 variant.
* si1133 UV sensor.
- New driver
* Spreadtrum SC27xx PMIC ADC
- New driver and dt bindings.
Features
* adxl345
- Add calibration offset readback and writing.
- Add sampling frequency control.
Fixes and Cleanups
* ad5933
- Use a macro for the channel definition to reduce duplication.
* ad9523
- Replace use of core mlock with a local lock. Part of ongoing efforts
to avoid confusing the purpose of mlock which is only about iio core
state changes.
- Fix displayed phase which was out by a factor of 10.
* adxl345
- Add a link to the datasheet.
- Rework the use of the address field in the chan_spec structures to
allow addition of more per channel information.
* adis imu
- Mark switch fall throughs.
* at91-sama5d2
- Fix some casting on big endian systems.
* bmp280
- Drop some DT elements that aren't used and should mostly be done from
userspace rather than in DT.
* hx711
- add clock-frequency dt binding and resulting delay to deal with capacitance
issue on some boards.
- fix a spurious unit-address in the example.
* ina2xx
- Avoid a possible kthread_stop with a stale task_struct.
* ltc2632
- Remove some unused local variables (assigned but value never used).
* max1363
- Use device_get_match_data to remove some boilerplate.
* mma8452
- Mark switch fall throughs.
* sca3000
- Fix a missing return in a switch statement (a bad fallthrough
previously!)
* sigma-delta-modulator
- Drop incorrect unit address from the DT example.
* st_accel
- Use device_get_match_data to drop some boiler plate.
- Move to probe_new for i2c driver as second parameter not used.
* st_sensors library
- Use a strlcpy (safe in this case).
* st_lsm6dsx
- Add some error logging.
* ti-ads7950
- SPDX
- Allow simultaneous buffered and polled reads. Needed on a Lego Mindstorms
EV3 where some channels are used for power supply monitoring at a very low
rate.
* ti-dac5571
- Remove an unused variable.
* xadc
- Drop some dead code.
-----BEGIN PGP SIGNATURE-----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=T+hS
-----END PGP SIGNATURE-----
Merge tag 'iio-for-4.19b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next
Jonathan writes:
Second set of IIO new device support, features and cleanups.
There are also a couple of fixes that can wait for the coming merge
window.
Core new features
* Support for phase channels (used in time of flight sensors amongst
other things)
* Support for deep UV light channel modifier.
New Device Support
* AD4758 DAC
- New driver and dt bindings.
* adxl345
- Support the adxl375 +-200g part which is register compatible.
* isl29501 Time of flight sensor.
- New driver
* meson-saradc
- Support the Meson8m2 Socs - right now this is just an ID, but there will
be additional difference in future.
* mpu6050
- New ID for 6515 variant.
* si1133 UV sensor.
- New driver
* Spreadtrum SC27xx PMIC ADC
- New driver and dt bindings.
Features
* adxl345
- Add calibration offset readback and writing.
- Add sampling frequency control.
Fixes and Cleanups
* ad5933
- Use a macro for the channel definition to reduce duplication.
* ad9523
- Replace use of core mlock with a local lock. Part of ongoing efforts
to avoid confusing the purpose of mlock which is only about iio core
state changes.
- Fix displayed phase which was out by a factor of 10.
* adxl345
- Add a link to the datasheet.
- Rework the use of the address field in the chan_spec structures to
allow addition of more per channel information.
* adis imu
- Mark switch fall throughs.
* at91-sama5d2
- Fix some casting on big endian systems.
* bmp280
- Drop some DT elements that aren't used and should mostly be done from
userspace rather than in DT.
* hx711
- add clock-frequency dt binding and resulting delay to deal with capacitance
issue on some boards.
- fix a spurious unit-address in the example.
* ina2xx
- Avoid a possible kthread_stop with a stale task_struct.
* ltc2632
- Remove some unused local variables (assigned but value never used).
* max1363
- Use device_get_match_data to remove some boilerplate.
* mma8452
- Mark switch fall throughs.
* sca3000
- Fix a missing return in a switch statement (a bad fallthrough
previously!)
* sigma-delta-modulator
- Drop incorrect unit address from the DT example.
* st_accel
- Use device_get_match_data to drop some boiler plate.
- Move to probe_new for i2c driver as second parameter not used.
* st_sensors library
- Use a strlcpy (safe in this case).
* st_lsm6dsx
- Add some error logging.
* ti-ads7950
- SPDX
- Allow simultaneous buffered and polled reads. Needed on a Lego Mindstorms
EV3 where some channels are used for power supply monitoring at a very low
rate.
* ti-dac5571
- Remove an unused variable.
* xadc
- Drop some dead code.
Currently the only way to use a variant of a supported model with
a different address width is to define a new compatible string and
the corresponding chip data structure.
Provide a flexible way to specify the size of the address pointer
by defining a new property: address-width.
Signed-off-by: Alan Chiang <alanx.chiang@intel.com>
Signed-off-by: Andy Yeh <andy.yeh@intel.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Rob Herring <robh@kernel.org>
[Bartosz: fixed the commit message]
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
There is no way to control the standard of subdevices which are part of
a media device. The ioctls which exists all target video devices
explicitly and the idea is that the video device should talk to the
subdevice. For subdevices part of a media graph this is not possible and
the standard must be controlled on the subdev device directly.
Add four new ioctls to be able to directly interact with subdevices and
control the video standard; VIDIOC_SUBDEV_ENUMSTD, VIDIOC_SUBDEV_G_STD,
VIDIOC_SUBDEV_S_STD and VIDIOC_SUBDEV_QUERYSTD.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Convert the Datapath I/O documentation to .rst format
and move to the Documation/networking/dpaa2 directory
Signed-off-by: Roy Pledge <roy.pledge@nxp.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Reviewed-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Documentation was already saying that fixed and dynamic partitioning can
be mixed but was missing a clear description and examples. This commit
adds a proper documentation of how descriptions can be nested and how
layouts can be mixed.
This addition is important for partitions that contain subpartitions.
In such cases partitions have to be properly described in order to let
system handle them correctly.
Depending on situation, nesting descriptions may provide more accurate
logic/structure and/or allow mixing partitioning types (various
"compatible" values).
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
The S5Pv210 external wakeup interrupts differ from Exynos therefore
separate compatible is needed. Duplicate existing flavor specific data
from exynos4210_wkup_irq_chip and add new compatible for S5Pv210.
At this point this new compatible does not bring anything new and works
exactly as existing "samsung,exynos4210-wakeup-eint".
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Tomasz Figa <tomasz.figa@gmail.com>
Cc: Sylwester Nawrocki <snawrocki@kernel.org>
Acked-by: Tomasz Figa <tomasz.figa@gmail.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
ARMv7 hardware (S5Pv210 and Exynos SoCs) provides only 32 external
interrupts which can wakeup device from deep sleep modes. On S5Pv210
these are gph0-gph3. On all ARMv7 Exynos designs these are gpx0-gpx3.
There is only one 32-bit register for controlling the external wakeup
interrupt mask (masking and unmasking waking capability of these
interrupts).
This lead to implementation in pinctrl driver and machine code which was
using static memory for storing the mask value and not caring about
multiple devices of pin controller... because only one pin controller
device will be handling this.
Since each pin controller node in Device Tree maps onto one device, this
corresponds to hidden assumption in parsing the Device Tree: external
wakeup interrupts can be defined only once. Make this assumption an
explicit requirement.
ARMv8 Exynos5433 and Exynos7 bring additional 32 external wakeup
interrupts (up to 64 total, banks gpa0-gpa3 and gpf1-gpf5) and another
32-bit wide register for controlling them. Existing code does not
support it but anyway these additional interrupts will be belonging to
the same pin controller device/node.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Tomasz Figa <tomasz.figa@gmail.com>
Cc: Sylwester Nawrocki <snawrocki@kernel.org>
Acked-by: Tomasz Figa <tomasz.figa@gmail.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Add 'data-enable-active' property to endpoint node properties list.
The property allows to specify the polarity of the data-enable signal,
which when in active state determinates when data lines have to sampled
for valid pixel data.
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Align description of the Gen2 and Gen3 bindings for parallel input.
This commit prepares for description of optional endpoint properties in ports
subnodes accepting parallel video connections.
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Optionally obtain a lcd-supply regulator during probe and use it in
__pxafb_lcd_power() to switch the power supply of LCD panels.
This helps boards booted from DT to control such voltages without
callbacks.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Reviewed-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
This patch adds the binding documentation for the pxa300 gcu.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
The Exynos5440 is not actively developed, there are no development
boards available and probably there are no real products with it.
Remove wide-tree support for Exynos5440.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Acked-by: Sylwester Nawrocki <snawrocki@kernel.org>
Added support for the CPCAP power management regulator functions on
Tegra based Motorola Xoom devices.
Added sw2_sw4 value tables, which provide power to the Tegra core and
aux devices.
Added the Xoom init tables and device tree compatibility match.
Signed-off-by: Peter Geis <pgwipeout@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
ColdFire coprocessor of the Aspeed SoCs. All the pre-requisites have
already been merged, this is the final piece in the puzzle.
This branch also pull gpio/ib-aspeed which is a topic branch already
in gpio/for-next (and thus in next) whic contains pre-requisites.
Finally, there's also a bug fix to the sbefifo driver for some
inconsistent use of a mutex in the error handling code.
-----BEGIN PGP SIGNATURE-----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=C4C6
-----END PGP SIGNATURE-----
Merge tag 'fsi-updates-2018-07-24' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/linux-fsi into char-misc-testing
Ben writes:
This adds support for offloading the FSI low level bitbanging to the
ColdFire coprocessor of the Aspeed SoCs. All the pre-requisites have
already been merged, this is the final piece in the puzzle.
This branch also pull gpio/ib-aspeed which is a topic branch already
in gpio/for-next (and thus in next) whic contains pre-requisites.
Finally, there's also a bug fix to the sbefifo driver for some
inconsistent use of a mutex in the error handling code.
This patch adds suuport for r8a77990 (R-Car E3).
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
This document describes MQPRIO and CBS Qdisc offload configuration
for cpsw driver based on examples. It potentially can be used in
audio video bridging (AVB) and time sensitive networking (TSN).
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add "rockchip,px30-i2s", "rockchip,rk3066-i2s" for i2s on px30 platform.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Liang Chen <cl@rock-chips.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This binding is used to keep the backward compatibility with the current
dtb's [1]. The binding informs the driver that the unused switch regulators
can be disabled.
If it is not specified, the driver doesn't disable the switch regulators.
[1] https://patchwork.kernel.org/patch/10490381/
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
The Amlogic Meson SAR ADC implementation on the Meson8m2 SoC is
identical to the Meson8b variant. Add a compatible string to indicate
that we support the SAR ADC on the Meson8m2 SoC.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Device tree compiler gives a warning if a device node has "@"
but no reg property.
Fix the example in iio: adc: sigma-delta-modulator.
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This patch adds support for the ISL29501 Time of Flight sensor.
Signed-off-by: Mathieu Othacehe <m.othacehe@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
We have introduce a new return type vm_fault_t for
fault, page_mkwrite and pfn_mkwrite handlers. Update
the document for the same
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
The documentation for this parameter said "6 bytes" when "8 bytes" was
intended; correct it.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
A n-bit binary counter can count a maximum of 2^n events and the count
value ranges from 0 to (2^n)-1
Signed-off-by: Siddaraju DH <siddarajudh@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
As the other files are documented explicitly, let's add a
short description for 'trigger' as well.
Signed-off-by: Andreas Ziegler <andreas.ziegler@fau.de>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
The per-event files to enable or disable kprobes and uprobes
are named 'enable', not 'enabled'. Fix the corresponding
documentation.
Signed-off-by: Andreas Ziegler <andreas.ziegler@fau.de>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Fill in missing documentation for the HardwareCorrupted field in proc.txt.
Signed-off-by: Prashant Dhamdhere <pdhamdhe@redhat.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
As Dave Chinner points out, we don't have a proper documentation for the
ktime_get() family of interfaces, making it rather unclear which of the
over 30 (!) interfaces one should actually use in a driver or elsewhere
in the kernel.
I wrote up an explanation from how I personally see the interfaces,
documenting what each of the functions do and hopefully making it a bit
clearer which should be used where.
This is the first time I tried writing .rst format documentation, so
in addition to any mistakes in the content, I probably also introduce
nonstandard formatting ;-)
I first tried to add an extra section to
Documentation/timers/timekeeping.txt, but this is currently not included
in the generated API, and it seems useful to have the API docs as part
of what gets generated in
https://www.kernel.org/doc/html/latest/core-api/index.html#core-utilities
instead, so I started a new file there.
I also considered adding the documentation inline in the
include/linux/timekeeping.h header, but couldn't figure out how to do
that in a way that would result both in helpful inline comments as
well as readable html output, so I settled for the latter, with
a small note pointing to it from the header.
Cc: Dave Chinner <david@fromorbit.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Stephen Boyd <sboyd@kernel.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Instead of port and endpoint properties for representing ports and
endpoints, use the keys of the hierarchical data extension references
when referring to the port and endpoint nodes. Additionally, use "reg"
properties as in Device Tree to specify the number of the port or the
endpoint.
The keys of the port nodes begin with "port" and the keys of the endpoint
nodes begin with "endpoint", both followed by "@" character and the number
of the port or the endpoint.
These changes have the advantage that no ACPI specific properties need to
be added to refer to non-device nodes. Additionally, using the name of the
node instead of an integer property inside the node is easier to parse in
code and easier for humans to understand.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Document that if a port has a single endpoint only, its value shall be
zero. Similarly, if a device object only has a single port, its value
shlla be zero.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Address a few issues in the ACPI _DSD properties graph documentation:
- the extension for port nodes is a data extension (and not property
extension),
- clean up language in port hierarchical data extension definition,
- add examples of port and endpoint packages,
- port property value is the number of the "port" and not the number
of the "port node",
- remove word "individual" from endpoint data node description, it
was redundant,
- remove the extra "The" in the endpoint property description,
- refer to hierarchical data extension keys and targets instead of
first and second package list entries.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Hierarchical data extension 1.1 allows using references as the second
entries of the hierearchical data extension packages. Update the
references and the examples.
The quotes are left in documentation for clarity.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
As part of the hierarchical data extension key naming, introduce numbering
scheme for the nodes that may be referred to using hierarchical data
extension references. This allows iterating over particular kind of nodes
recognised by the node name whilst allowing numbering the nodes, bringing
ACPI to feature parity with DT in this respect.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add documentation on how to refer to hierarchical data nodes in a
generic way. This brings ACPI to feature parity with Device Tree in
terms of being able to refer to any node in the tree.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This represents a physical chip in the system and allows
a stable numbering scheme to be passed to udev for userspace
to recognize which chip is which.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Rob Herring <robh@kernel.org>
This isn't per-se a real device, it's a pseudo-device that
represents the use of the Aspeed built-in ColdFire to
implement the FSI protocol by bitbanging the GPIOs instead
of doing it from the ARM core.
Thus it's a drop-in replacement for the existing
fsi-master-gpio pseudo-device for use on systems based
on the Aspeed chips. It has most of the same properties,
plus some more needed to operate the coprocessor.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: Rob Herring <robh@kernel.org>
This branch adds initial support for new Texas Instruments AM654
quad core A53 ARMv8 SoC. It's the first device for TI K3 multicore SoC
architecture.
Initially only basic devices are configured, support for more devices
will follow later on. And many of the internal devices familiar from
earlier TI SoCs should work with existing kernel device drivers.
-----BEGIN PGP SIGNATURE-----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=pkLC
-----END PGP SIGNATURE-----
Merge tag 'am654-for-v4.19-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt
TI AM654 support for v4.19 merge window
This branch adds initial support for new Texas Instruments AM654
quad core A53 ARMv8 SoC. It's the first device for TI K3 multicore SoC
architecture.
Initially only basic devices are configured, support for more devices
will follow later on. And many of the internal devices familiar from
earlier TI SoCs should work with existing kernel device drivers.
* tag 'am654-for-v4.19-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
arm64: dts: ti: Add support for AM654 EVM base board
soc: ti: Add Support for AM654 SoC config option
arm64: dts: ti: Add Support for AM654 SoC
arm64: Add support for TI's K3 Multicore SoC architecture
dt-bindings: arm: ti: Add bindings for AM654 SoC
Signed-off-by: Olof Johansson <olof@lixom.net>
This adds new drivers and bindings for the SDM845 AOSS (always on
subsystem) reset controller and for the Uniphier USB3 core reset.
SPI controller resets are added to the Uniphier reset driver.
-----BEGIN PGP SIGNATURE-----
iI4EABYIADYWIQRRO6F6WdpH1R0vGibVhaclGDdiwAUCW1G8dhgccGhpbGlwcC56
YWJlbEBnbWFpbC5jb20ACgkQ1YWnJRg3YsASjAD/a7JFfDm8DTkTaGd15NuO3FB2
HE/VMc0ULgbFs5UPqeIA/R9cJXIbSnEEIw3h4QYQVyTHCQzMvQMDybhmLwyu5zAJ
=hJ6s
-----END PGP SIGNATURE-----
Merge tag 'reset-for-4.19' of git://git.pengutronix.de/git/pza/linux into next/drivers
Reset controller changes for v4.19
This adds new drivers and bindings for the SDM845 AOSS (always on
subsystem) reset controller and for the Uniphier USB3 core reset.
SPI controller resets are added to the Uniphier reset driver.
* tag 'reset-for-4.19' of git://git.pengutronix.de/git/pza/linux:
reset: uniphier: add reset control support for SPI
reset: uniphier: add USB3 core reset control
dt-bindings: reset: uniphier: add USB3 core reset support
reset: simple: export reset_simple_ops to be referred from modules
reset: qcom: AOSS (always on subsystem) reset controller
dt-bindings: reset: Add AOSS reset bindings for SDM845 SoCs
Signed-off-by: Olof Johansson <olof@lixom.net>
- Add device tree support for i.MX6SLL SoC.
- New board support: ConnectCore 6UL System-On-Module and SBC Express;
ZII SCU2 Mezz, SCU3 ESB, SSMB SPU3 and CFU1 board; i.MX6SLL EVK
board; Engicam i.CoreM6 1.5 Quad/Dual MIPI; LogicPD MX31Lite board;
i.MX53 HSC/DDC boards from K+P.
- Remove fake regulator bus container node and enable USB OTG support
for i.MX6 wandboard and riotboard.
- Populate RAVE SP EEPROM, backlight, power button and watchdog devices
for ZII boards.
- Add cooling-cells for cpufreq cooling device, and add OPP properties
for all CPUs.
- A series from Anson Huang to enable LCD panel and backlight support
for imx6sll-evk board.
- Make pfuze100 sw4 regulator always-on for for a few Freescale/NXP
development boards, because the regulator is critical there and
cannot be turned off.
- Add more device support for i.MX5: AIPSTZ, SAHARA Crypto, M4IF,
Tigerp, PMU, CodaHx4 VPU.
- Enable PMU secure-reg-access for imx51-babbage, imx51-zii-rdu1 and
imx53-ppd board.
- Switch more device tree license to use SPDX identifier.
- Switch to use OF graph to describe the display for imx7d-nitrogen7.
- Add chosen/stdout-path for more boards, so that earlycon can be
enabled more easily on kernel cmdline.
- Convert GPC to new device tree bindings and add Vivante gpu nodes
for i.MX6SL SoC.
- Add more device support for imx6dl-mamoj board: parallel display,
WiFi and USB.
- A series from Stefan Agner to update i.MX6 apalis/colibri boards on
various aspects: SD/MMC card detection, regulators, etc.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJbUo3SAAoJEFBXWFqHsHzOtMAH/3UgJzGvYHIiOVVTAvwz3V5y
vZibWFOmzQDUcn3nrP54wGaMHT0abQ81AwrHKr0Bj1ujeJTCglRT8N5I/Dph6emU
aDSBIlv8y1fqF/96LhDk3bqGwg/pdF29dWBsaV45Va/ZZGErEzSTNlxV/n+nHkVy
S6rjGRkqk9abGmpDdJg2gYDYisDr9dl8iAEEBzBmOWLusEL2nvrqaMEmqBtVDFYd
fwLa+4HYZF3DaIfEjYy1INHeoCyBEAk8BS9u7b1jWTxONLNXh5GA6qFhiJgtZYrk
9+/mQ6D44fWkpJjWCOP4I12iRa5fr1UyVTslq4D6BmVK44Mhym/kyi9wXkv4fmc=
=j9qu
-----END PGP SIGNATURE-----
Merge tag 'imx-dt-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt
i.MX device tree update for 4.19:
- Add device tree support for i.MX6SLL SoC.
- New board support: ConnectCore 6UL System-On-Module and SBC Express;
ZII SCU2 Mezz, SCU3 ESB, SSMB SPU3 and CFU1 board; i.MX6SLL EVK
board; Engicam i.CoreM6 1.5 Quad/Dual MIPI; LogicPD MX31Lite board;
i.MX53 HSC/DDC boards from K+P.
- Remove fake regulator bus container node and enable USB OTG support
for i.MX6 wandboard and riotboard.
- Populate RAVE SP EEPROM, backlight, power button and watchdog devices
for ZII boards.
- Add cooling-cells for cpufreq cooling device, and add OPP properties
for all CPUs.
- A series from Anson Huang to enable LCD panel and backlight support
for imx6sll-evk board.
- Make pfuze100 sw4 regulator always-on for for a few Freescale/NXP
development boards, because the regulator is critical there and
cannot be turned off.
- Add more device support for i.MX5: AIPSTZ, SAHARA Crypto, M4IF,
Tigerp, PMU, CodaHx4 VPU.
- Enable PMU secure-reg-access for imx51-babbage, imx51-zii-rdu1 and
imx53-ppd board.
- Switch more device tree license to use SPDX identifier.
- Switch to use OF graph to describe the display for imx7d-nitrogen7.
- Add chosen/stdout-path for more boards, so that earlycon can be
enabled more easily on kernel cmdline.
- Convert GPC to new device tree bindings and add Vivante gpu nodes
for i.MX6SL SoC.
- Add more device support for imx6dl-mamoj board: parallel display,
WiFi and USB.
- A series from Stefan Agner to update i.MX6 apalis/colibri boards on
various aspects: SD/MMC card detection, regulators, etc.
* tag 'imx-dt-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (96 commits)
ARM: dts: imx7d: remove "operating-points" property for cpu1
ARM: dts: vf610-zii-ssmb-spu3: Fix W=1 level warnings
ARM: dts: vf610: Add ZII CFU1 board
ARM: dts: imx6dl-mamoj: Add usb host and device support
ARM: dts: imx6dl-mamoj: Add Wifi support
ARM: dts: imx6dl-mamoj: Add parallel display support
ARM: dts: vf610: Add ZII SSMB SPU3 board
ARM: dts: imx6ul-pico-hobbit: Do not hardcode the memory size
ARM: dts: imx6sl-evk: make pfuze100 sw4 always on
ARM: dts: imx6sll-evk: make pfuze100 sw4 always on
ARM: dts: imx6sx-sdb-reva: make pfuze100 sw4 always on
ARM: dts: imx6qdl-sabresd: make pfuze100 sw4 always on
ARM: dts: imx6sl-evk: add missing GPIO iomux setting
ARM: dts: imx51-zii-scu3-esb: Fix RAVE SP watchdog compatible string
ARM: dts: imx51-zii-scu3-esb: Add switch IRQ line pinumx config
ARM: dts: imx6sx-nitrogen6sx: remove obsolete display configuration
ARM: dts: imx7d-nitrogen7: use OF graph to describe the display
ARM: dts: imx: Switch Boundary Devices boards to SPDX identifier
ARM: dts: imx6sl: Add vivante gpu nodes
ARM: dts: imx6sll-evk: enable SEIKO 43WVF1G lcdif panel
...
Signed-off-by: Olof Johansson <olof@lixom.net>
Bindings relating to initial support for RZ/N1D (R9A06G032) SoC and its
RZN1D-DB board:
* Add Renesas R9A06G032 SMP enable method
To be used to enable second CA7 CPU
* Document SoC and Board bindings
-----BEGIN PGP SIGNATURE-----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=CTVC
-----END PGP SIGNATURE-----
Merge tag 'renesas-dt-bindings-for-v4.19' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt
Renesas ARM Based SoC DT Bindings Updates for v4.19
Bindings relating to initial support for RZ/N1D (R9A06G032) SoC and its
RZN1D-DB board:
* Add Renesas R9A06G032 SMP enable method
* Document SoC and Board bindings
* tag 'renesas-dt-bindings-for-v4.19' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
dt-bindings: cpu: Add Renesas R9A06G032 SMP enable method.
dt-bindings: arm: Document the RZN1D-DB board
Signed-off-by: Olof Johansson <olof@lixom.net>
- New boards from Laird: WB45N, WB50N, SOM60 modules and DVK, Gatwick
- fix the PMC compatibles
-----BEGIN PGP SIGNATURE-----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=XVdU
-----END PGP SIGNATURE-----
Merge tag 'at91-ab-4.19-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux into next/dt
AT91 DT for 4.19:
- New boards from Laird: WB45N, WB50N, SOM60 modules and DVK, Gatwick
- fix the PMC compatibles
* tag 'at91-ab-4.19-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
ARM: dts: at91: fix typos for SSC TD functions
ARM: dts: add support for Laird SOM60 module and DVK boards
ARM: dts: add support for Gatwick board based on WB50N
ARM: dts: add support for Laird WB50N cpu module and DVK
ARM: dts: add support for Laird WB45N cpu module and DVK
ARM: dts: at91: add labels to soc dtsi for derivative boards
dt-bindings: add laird and giantec vendor prefix
ARM: dts: fix PMC compatible
ARM: at91: fix USB clock detection handling
dt-bindings: clk: at91: Document all the PMC compatibles
dt-bindings: arm: remove PMC bindings
Signed-off-by: Olof Johansson <olof@lixom.net>
This adds dts files for two new beaglebone variants for
Octavo Systems OSD3358-SM-RED and Sancloud am335x-sancloud-bbe.
-----BEGIN PGP SIGNATURE-----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=h3F9
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.19/dt-pt2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt
Few more beaglebone variants for v4.19 merge window
This adds dts files for two new beaglebone variants for
Octavo Systems OSD3358-SM-RED and Sancloud am335x-sancloud-bbe.
* tag 'omap-for-v4.19/dt-pt2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: am335x: add am335x-sancloud-bbe board support
dt-bindings: Add vendor prefix for Sancloud
ARM: dts: Add DT support for Octavo Systems OSD3358-SM-RED based on TI AM335x
Signed-off-by: Olof Johansson <olof@lixom.net>
Add device binding documentation for Qualcomm Technology Inc's RPMH RSC
driver. The driver is used for communicating resource state requests for
shared resources.
Cc: devicetree@vger.kernel.org
Signed-off-by: Lina Iyer <ilina@codeaurora.org>
Reviewed-by: Rob Herring <robh@kernel.org>
[rplsssn@codeaurora.org: minor order correction for TCS type]
Signed-off-by: Raju P.L.S.S.S.N <rplsssn@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
arm64's new use of KVMs get_events/set_events API calls isn't just
or RAS, it allows an SError that has been made pending by KVM as
part of its device emulation to be migrated.
Wire this up for 32bit too.
We only need to read/write the HCR_VA bit, and check that no esr has
been provided, as we don't yet support VDFSR.
Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Dongjiu Geng <gengdongjiu@huawei.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
For the arm64 RAS Extension, user space can inject a virtual-SError
with specified ESR. So user space needs to know whether KVM support
to inject such SError, this interface adds this query for this capability.
KVM will check whether system support RAS Extension, if supported, KVM
returns true to user space, otherwise returns false.
Signed-off-by: Dongjiu Geng <gengdongjiu@huawei.com>
Reviewed-by: James Morse <james.morse@arm.com>
[expanded documentation wording]
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
For the migrating VMs, user space may need to know the exception
state. For example, in the machine A, KVM make an SError pending,
when migrate to B, KVM also needs to pend an SError.
This new IOCTL exports user-invisible states related to SError.
Together with appropriate user space changes, user space can get/set
the SError exception state to do migrate/snapshot/suspend.
Signed-off-by: Dongjiu Geng <gengdongjiu@huawei.com>
Reviewed-by: James Morse <james.morse@arm.com>
[expanded documentation wording]
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Update the documentation to reflect the ordering requirements of
restoring the GICD_IIDR register before any other registers and the
effects this has on restoring the interrupt groups for an emulated GICv2
instance.
Also remove some outdated limitations in the documentation while we're
at it.
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Add new channel type support for phase.
This channel may be used by Time-of-flight sensors to express the
phase difference between emitted and received signals. Those sensor
will then use the phase shift of return signals to approximate the
distance to objects.
Signed-off-by: Mathieu Othacehe <m.othacehe@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Also mention that the traditional devices provide glyph values whereas
/dev/vcsu* is unicode based.
Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Serial aliases are optional since commit 7678f4c20f ("serial:
sh-sci: Add support for dynamic instances").
Update the DT bindings to reflect this.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The RZ/N1 UART is a modified Synopsys DesignWare UART.
The modifications only relate to DMA so you could actually use the
controller with the Synopsys compatible string if you are not using
DMA, but you should not do so.
Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch adds compatible string support for the Renesas R-Car E3
(r8a77990) SoC.
Signed-off-by: Hiromitsu Yamasaki <hiromitsu.yamasaki.ym@renesas.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Document the bindings.
Signed-off-by: Eddie James <eajames@linux.vnet.ibm.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Users of if_changed could easily feel invited to use it to divide a
recipe into parts like:
a: prereq FORCE
$(call if_changed,do_a)
$(call if_changed,do_b)
But this is problematic, because if_changed should not be used more
than once per target: in the above example, if_changed stores the
command-line of the given command in .a.cmd and when a is up-to-date
with respect to prereq, the file .a.cmd contains the command-line for
the last command executed, i.e. do_b.
When the recipe is then executed again, without any change of
prerequisites, the command-line check for do_a will fail, do_a will be
executed and stored in .a.cmd. The next check, however, will still see
the old content (the file isn't re-read) and if_changed will skip
do_b, because the command-line test will not recognize a change. On
the next execution of the recipe the roles will flip: do_a is OK but
do_b not and it will be executed. And so on...
Signed-off-by: Dirk Gouders <dirk@gouders.net>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
the data and metadata area. This allows userspace tools (e.g. LVM2)
to place a header and metadata at the front of the writecache device
for its use.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJbUjNdAAoJEMUj8QotnQNa3NsH/RfalVY4y+Y8TSyfz20oHHcf
Gxr0dMKQPYYeuAMxqcVyn9IhowZpcoBNbR050NEDpBjsE2augf0t2Ixl08gOn6Hx
QJECHxqMQsIcSnvQLqqf4DGXU78WiacbYlLXI+7fnvddWrV+VRALSDxiuQAbCKue
Oj/LSsRh/zhf9ruMWURrHpy8k/GOEZzrhgH3as6OZcYgLYaakv3yGY42vPmSbIj+
RXmTzfJzxxxkWXAg6IIqawFlxZunLkcOhd1jSAE46Gh8NGe4jbP6U3AprMyp2yyB
E388aggr7CgZqsCWp84EcAWa30f0G9+XlUFqB4ydQO/Mp39WH3VX2r5QBLBo2+8=
=BN6D
-----END PGP SIGNATURE-----
Merge tag 'for-4.18/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fix from Mike Snitzer:
"Fix DM writecache target to allow an optional offset to the start of
the data and metadata area.
This allows userspace tools (e.g. LVM2) to place a header and metadata
at the front of the writecache device for its use"
* tag 'for-4.18/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm writecache: support optional offset for start of device
Here are the USB-serial updates for 4.19-rc1, including:
- gpio support for CP2102N devices
- improved line-speed handling for cp210x
- conversion to spin_lock_irqsave() in completion handlers
- dropped kl5kusb105 support from the kl5kusb105 driver (sic!)
Included are also various lower-priority fixes and clean ups.
All but the final commit have been in linux-next, and with no reported
issues.
Signed-off-by: Johan Hovold <johan@kernel.org>
-----BEGIN PGP SIGNATURE-----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=0ukW
-----END PGP SIGNATURE-----
Merge tag 'usb-serial-4.19-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-next
Johan writes:
USB-serial updates for v4.19-rc1
Here are the USB-serial updates for 4.19-rc1, including:
- gpio support for CP2102N devices
- improved line-speed handling for cp210x
- conversion to spin_lock_irqsave() in completion handlers
- dropped kl5kusb105 support from the kl5kusb105 driver (sic!)
Included are also various lower-priority fixes and clean ups.
All but the final commit have been in linux-next, and with no reported
issues.
Signed-off-by: Johan Hovold <johan@kernel.org>
Add the DT bindings documentation for axg sound card
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add the DT bindings documentation for axg's TDM interfaces
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The Tanix TX3 Mini is a TV box based on the Amlogic S905W chipset. It
comes with:
- 1 GiB or 2 GiB of DDR3 memory depending on the model
- 8 GB or 16 GB eMMC flash depending on the model
- 802.11 b/g/n wifi (Silicon Valley Microelectronics SSV6051, does not
support Bluetooth, not supported by any mailine driver)
- an LED 7 segment display with an FD628 controller (not supported by
any mainline driver)
- HDMI and AV (CVBS) output
- 2x USB (utilizing both USB ports provided by the SoC)
- micro SD card slot
The board seems to be very similar to the P23x and Q20x reference
boards:
- eMMC reset routed to BOOT_9
- the SDIO wifi chip's reset line is routed to GPIOX_6 and the reference
clock is 32.768KHz on PWM_E
- SD card detection is routed to CARD_6
- vqmmc of all MMC controllers is hard-wired to 1.8V (VDDIO_BOOT)
- uart_AO can be accessed after opening the case and soldering RX, TX
and GND lines onto the exposed solder points (marked with RX, TX and
GND)
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
S905W SoC is another SoC from the GXL family. It is a cost-reduced
version of the S905X SoC. The following differences are known:
- S905W supports HDMI resolutions up to 4k@30fps (while S905X support
resolutions up to 4k@60fps)
- the built-in video decoders of S905W decode up to 4k@30fps (while
S905X supports decoding up to 4k@60fps)
- CPU speed on S905W is limited to 1.2GHz (compared to 1.5GHz on S905X,
this is handled in the SCPI firmware)
- the DRAM interface on S905W is limited to 16-bit (GXL supports both,
16-bit and 32-bit)
Notes based on Amlogic's GPL kernel sources:
- the P281 is a development board from Amlogic which uses the S905W SoC.
Amlogic's GPL kernel sources indicate that it uses the same PCB layout
as the "P231" board (and simply replaces the S905D from the original
P231 board with a S905W SoC).
- it is assumed that the S905W SoC is pin-compatible with the S905X SoC
since Amlogic's GPL kernel sources use the same driver for both SoCs.
- gxl_p281_1g.dts contains a comment which mentions that "max gp pll for
gpu is 650M, temporarily disabled". However, it seems to boot fine
with 744MHz (as used on GXBB and the other GXL SoCs).
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
According to their website (http://www.oranth.com/about-oranth/)
Shenzhen Oranth Technology Co., Ltd. (or simply "Oranth") "is a
professional Design House & Manufacturer for Android TV Box established
in 2014". One of their brands is Tanix (sometimes also spelled "TANIX").
One of their most popular devices is the "Tanix TX3 Mini" TV box (which
uses the Amlogic S905W chipset).
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Add dt-bindings for the audio memory arbiter found on Amlogic's
A113 based SoCs
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Document Mediatek X20 Development Board which is a 96Boards Consumer
Edition platform based on MT6797 SoC.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
The S805X is a variant of the Amlogic Meson GXL SoC family with the
following physical limitations :
- No SDCard interface
- No GPIOCLK pins
- No USB OTG ID pin (but Gadget feature can stil be forced)
- No 5V regulator
- Reduced ADC inputs (only ADC0 and ADC1)
- GPIODV_26, GPIOAO_3, GPIOAO_4, GPIOAO_5, GPIOAO_6, GPIOX_14,
GPIOX_15, GPIOH_3 are no more exposed on the package
Amlogic exposes the following SW limitations :
- HDMI max resolution should be 1080p60, VPU clock should be downgraded
- Video Decoding should be limited to 1080p60, VDEC clock should be downgraded
- CPU speed should be limited by SCPI OPP table to 1.2GHz
- DRAM interface is limited to DDR4 16bit up to 1GiB
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Commit 34962fb807 ("docs: Fix more broken references") replaced the
broken reference to rockchip,dwc3-usb-phy.txt binding for the Qualcomm
DWC3 binding (qcom-dwc3-usb-phy.txt). That's wrong, so replace that
reference for the correct ones.
Fixes: 34962fb807 ("docs: Fix more broken references")
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Rob Herring <robh@kernel.org>
By default metadata only copy up is disabled. Provide a mount option so
that users can choose one way or other.
Also provide a kernel config and module option to enable/disable metacopy
feature.
metacopy feature requires redirect_dir=on when upper is present.
Otherwise, it requires redirect_dir=follow atleast.
As of now, metacopy does not work with nfs_export=on. So if both
metacopy=on and nfs_export=on then nfs_export is disabled.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
We can now drop description of the ro/rw inconsistency from the
documentation.
Also clarify, that now fully standard compliant behavior can be enabled
with kernel/module/mount options.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
add ufs node document for Hisilicon.
Signed-off-by: Li Wei <liwei213@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Tested-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Core Changes:
- add support for DisplayPort CEC-Tunneling-over-AUX (Hans Verkuil)
- more doc updates (Daniel Vetter)
- fourcc: Add is_yuv field to drm_format_info (Ayan Kumar Halder)
- dma-buf: correctly place BUG_ON (Michel Dänzer)
Driver Changes:
- more vkms support(Rodrigo Siqueira)
- many fixes and small improments to all drivers
-----BEGIN PGP SIGNATURE-----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=HyBh
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2018-07-18' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for 4.19:
Core Changes:
- add support for DisplayPort CEC-Tunneling-over-AUX (Hans Verkuil)
- more doc updates (Daniel Vetter)
- fourcc: Add is_yuv field to drm_format_info (Ayan Kumar Halder)
- dma-buf: correctly place BUG_ON (Michel Dänzer)
Driver Changes:
- more vkms support(Rodrigo Siqueira)
- many fixes and small improments to all drivers
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180718200826.GA20165@juma
Add sysfs attributes for rootport statistics (that are cumulative of all
the ERR_* messages seen on this PCI hierarchy).
Signed-off-by: Rajat Jain <rajatja@google.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Add sysfs attributes to provide total and breakdown of the AERs seen,
into different type of correctable, fatal and nonfatal errors:
/sys/bus/pci/devices/<dev>/aer_dev_correctable
/sys/bus/pci/devices/<dev>/aer_dev_fatal
/sys/bus/pci/devices/<dev>/aer_dev_nonfatal
Signed-off-by: Rajat Jain <rajatja@google.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The interrupt controller of the JZ4725B works the same way as the other
JZ SoCs from Ingenic; so we just add a new compatible string.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
The MMC controllers on H6 is similar to the ones on A64, but with some
new features.
Add compatible strings for them (with the A64 compatible strings as
fallback, in order to make them to work with A64 drivers).
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
address-cells/size-cells is unnecessary for dwmac-sun8i node.
It was in early days, but since a mdio node is used, it could be
removed.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Add MSI-X support and update driver documentation accordingly.
Add 2 new IOCTL commands:
- Allow to reconfigure driver IRQ type in runtime.
- Allow to retrieve current driver IRQ type configured.
Add IRQ type validation before executing the READ/WRITE/COPY tests.
Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
Add MSI-X support and update driver documentation accordingly.
Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
Cleanup PCI_ENDPOINT_TEST memspace (by moving the interrupt number away
from command section).
Add IRQ_TYPE register to identify the triggered ID interrupt required
for the READ/WRITE/COPY tests and raise IRQ test commands.
Update documentation accordingly.
Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
The bindings were missing when the device-tree
files were added
Signed-off-by: Luis Araneda <luaraneda@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Move the Adapteva Parallela board to Xilinx dt-bindings,
as it's based on a Zynq SoC from Xilinx
Signed-off-by: Luis Araneda <luaraneda@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>