1
0
Fork 0
alistair23-linux/arch/arm/boot/dts
Kumar Gala e512448f6e ARM: dts: qcom: Add SATA support on IPQ8064/AP148
Add SATA PHY and SATA AHCI controller nodes to device tree to enable
generic ahci support on the IPQ8064/AP148 board.

Signed-off-by: Kumar Gala <galak@codeaurora.org>
2014-10-16 02:44:47 -05:00
..
include
Makefile ARM: dts: qcom: Add initial IFC6540 board device tree 2014-09-11 11:14:00 -05:00
aks-cdu.dts ARM: at91/dt: aks-cdu: define slow crytal frequency 2014-07-09 19:05:16 +02:00
am33xx-clocks.dtsi ARM: dts: am33xx-clock: Fix ehrpwm tbclk data 2014-05-23 11:50:36 +03:00
am33xx.dtsi ARM: dts: AM33xx: Add mailbox node 2014-07-15 05:08:56 -07:00
am35xx-clocks.dtsi ARM: dts: omap3 clock data 2014-01-17 12:36:41 -08:00
am43x-epos-evm.dts Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input 2014-08-08 17:39:48 -07:00
am43xx-clocks.dtsi Merge branch 'for-v3.16/clk-dt' of https://github.com/t-kristo/linux-pm into omap-for-v3.16/dt-v2 2014-05-28 10:14:48 -07:00
am335x-base0033.dts ARM: dts: AM33XX BASE0033: add 32KBit EEPROM support 2013-11-26 15:03:38 -08:00
am335x-bone-common.dtsi ARM: dts: AM33XX: fix ethernet and mdio default state 2014-05-14 14:45:15 -07:00
am335x-bone.dts ARM: dts: AM33XX: Add AES data and documentation 2013-10-11 21:06:40 +02:00
am335x-boneblack.dts ARM: dts: am335x-boneblack: remove use of ti,vcc-aux-disable-is-sleep 2014-05-05 17:37:13 -07:00
am335x-evm.dts ARM: dts: am335x-evm: Enable the McASP FIFO for audio 2014-07-07 04:57:17 -07:00
am335x-evmsk.dts arm: Xilinx Zynq dt patches for v3.17 2014-07-19 12:16:34 -07:00
am335x-igep0033.dtsi ARM: dts: Fix TI CPSW Phy mode selection on IGEP COM AQUILA. 2014-07-07 05:01:18 -07:00
am335x-nano.dts ARM: dts: AM33XX: fix ethernet and mdio default state 2014-05-14 14:45:15 -07:00
am335x-pepper.dts ARM: dts: Add devicetree for Gumstix Pepper board 2014-07-09 04:34:19 -07:00
am437x-gp-evm.dts Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input 2014-08-08 17:39:48 -07:00
am437x-sk-evm.dts ARM: dts: add support for AM437x StarterKit 2014-07-01 05:47:35 -07:00
am3517-craneboard.dts ARM: dts: Add basic devices for AM3517-craneboard 2014-03-02 18:34:14 +01:00
am3517-evm.dts ARM: dts: Add basic devices on am3517-evm 2013-12-08 14:15:46 -08:00
am3517.dtsi ARM: dts: AM3517: Disable absent IPs inherited from OMAP3 2014-04-25 09:55:00 -07:00
am3517_mt_ventoux.dts ARM: dts: AM3XXX: Use #include for all device trees 2013-06-18 18:53:41 -05:00
am4372.dtsi ARM: SoC device-tree changes for 3.17 2014-08-08 11:16:58 -07:00
animeo_ip.dts ARM: at91/dt: animeo_ip: define crystals frequencies 2014-07-09 19:05:18 +02:00
armada-38x.dtsi mvebu DT changes for v3.17 (round 2) 2014-07-20 12:23:56 -07:00
armada-370-db.dts ARM: SoC devicetree updates for 3.16 2014-06-02 16:34:00 -07:00
armada-370-mirabox.dts ARM: mvebu: remove clock-frequency of serial port Device Tree nodes 2014-04-26 00:34:44 +00:00
armada-370-netgear-rn102.dts ARM: mvebu: remove clock-frequency of serial port Device Tree nodes 2014-04-26 00:34:44 +00:00
armada-370-netgear-rn104.dts ARM: mvebu: remove clock-frequency of serial port Device Tree nodes 2014-04-26 00:34:44 +00:00
armada-370-rd.dts ARM: mvebu: remove clock-frequency of serial port Device Tree nodes 2014-04-26 00:34:44 +00:00
armada-370-xp.dtsi mvebu DT changes for v3.16 2014-05-19 21:55:03 -07:00
armada-370.dtsi ARM: mvebu: switch to the new PMSU binding in Armada 370/XP Device Tree 2014-04-24 05:28:41 +00:00
armada-375-db.dts mvebu DT changes for v3.17 (round 2) 2014-07-20 12:23:56 -07:00
armada-375.dtsi ARM: mvebu: Add missing MDIO clock in Armada 375 2014-07-23 12:04:40 +00:00
armada-380.dtsi ARM: mvebu: Fix the improper use of the compatible string armada38x using a wildcard 2014-06-24 11:33:24 +00:00
armada-385-db.dts mvebu fixes for v3.16 2014-06-25 20:26:30 +02:00
armada-385-rd.dts ARM: mvebu: Fix the improper use of the compatible string armada38x using a wildcard 2014-06-24 11:33:24 +00:00
armada-385.dtsi ARM: mvebu: Fix the improper use of the compatible string armada38x using a wildcard 2014-06-24 11:33:24 +00:00
armada-xp-axpwifiap.dts ARM: mvebu: remove clock-frequency of serial port Device Tree nodes 2014-04-26 00:34:44 +00:00
armada-xp-db.dts ARM: SoC devicetree updates for 3.16 2014-06-02 16:34:00 -07:00
armada-xp-gp.dts ARM: SoC devicetree updates for 3.16 2014-06-02 16:34:00 -07:00
armada-xp-lenovo-ix4-300d.dts ARM: mvebu: Add dts definition for Lenovo Iomega ix4-300d NAS 2014-07-28 13:59:41 +00:00
armada-xp-matrix.dts Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next 2014-06-12 14:27:40 -07:00
armada-xp-mv78230.dtsi ARM: mvebu: update Armada XP DT for dynamic frequency scaling 2014-07-16 12:54:13 +00:00
armada-xp-mv78260.dtsi ARM: mvebu: update Armada XP DT for dynamic frequency scaling 2014-07-16 12:54:13 +00:00
armada-xp-mv78460.dtsi ARM: mvebu: update Armada XP DT for dynamic frequency scaling 2014-07-16 12:54:13 +00:00
armada-xp-netgear-rn2120.dts ARM: mvebu: don't use clocks property in UART node for Netgear RN2120 2014-04-26 00:34:57 +00:00
armada-xp-openblocks-ax3-4.dts ARM: mvebu: DT: fix OpenBlocks AX3-4 RAM size 2014-06-17 17:09:37 +02:00
armada-xp.dtsi ARM: mvebu: update Armada XP DT for dynamic frequency scaling 2014-07-16 12:54:13 +00:00
armv7-m.dtsi ARM: device trees for Energy Micro's EFM32 Cortex-M3 SoCs 2013-12-16 17:51:34 +01:00
at91-ariag25.dts ARM: at91/dt: ariag25: define crystals frequencies 2014-07-09 19:05:10 +02:00
at91-cosino.dtsi ARM: at91/dt: cosino define crystals frequencies 2014-07-09 19:05:20 +02:00
at91-cosino_mega2560.dts ARM: at91/dt: at91-cosino_mega2560 remove useless tsadcc node 2014-05-07 18:28:41 +02:00
at91-foxg20.dts ARM: at91/dt: foxg20: define crystals frequencies 2014-07-09 19:05:14 +02:00
at91-qil_a9260.dts ARM: at91/dt: qil_a9260: define crystals frequencies 2014-07-09 19:05:15 +02:00
at91-sama5d3_xplained.dts ARM: at91/dt: sama5d3 crystals under the clocks node 2014-07-09 18:02:45 +02:00
at91rm9200.dtsi ARM: at91/dt: rm9200: define clocks 2014-07-09 19:05:11 +02:00
at91rm9200_pqfp.dtsi ARM: at91/dt: add at91rm9200 PQFP package version 2013-08-21 12:18:52 +02:00
at91rm9200ek.dts ARM: at91/dt: at91rm9200ek: define crystals frequencies 2014-07-09 19:05:12 +02:00
at91sam9g15.dtsi
at91sam9g15ek.dts
at91sam9g20.dtsi ARM: at91/dt: sam9g20: define clocks 2014-07-09 19:05:13 +02:00
at91sam9g20ek.dts
at91sam9g20ek_2mmc.dts
at91sam9g20ek_common.dtsi ARM: at91/dt: at91sam9g20ek: define crystals frequencies 2014-07-09 19:05:14 +02:00
at91sam9g25.dtsi ARM: at91/dt: split sam9x5 peripheral definitions 2013-10-16 15:47:07 +02:00
at91sam9g25ek.dts
at91sam9g35.dtsi ARM: at91/dt: split sam9x5 peripheral definitions 2013-10-16 15:47:07 +02:00
at91sam9g35ek.dts
at91sam9g45.dtsi ARM: at91/dt: sam9g45: define clocks 2014-07-09 19:05:19 +02:00
at91sam9m10g45ek.dts ARM: at91/dt: sam9m10g45ek: define crystals frequencies 2014-07-09 19:05:19 +02:00
at91sam9n12.dtsi Linux 3.16-rc6 2014-07-28 17:04:15 +02:00
at91sam9n12ek.dts ARM: at91: at91sam9n12ek: switch sound to CCF 2014-07-09 18:02:46 +02:00
at91sam9rl.dtsi ARM: at91/dt: add NAND + DMA property for at91sam9rl 2014-07-09 18:02:47 +02:00
at91sam9rlek.dts ARM: at91/dt: sam9rl crystals under the clocks node 2014-07-09 18:02:44 +02:00
at91sam9x5.dtsi Linux 3.16-rc6 2014-07-28 17:04:15 +02:00
at91sam9x5_can.dtsi ARM: at91/dt: define sam9x5 clocks 2014-05-22 18:03:13 +02:00
at91sam9x5_isi.dtsi ARM: at91/dt: define sam9x5 clocks 2014-05-22 18:03:13 +02:00
at91sam9x5_lcd.dtsi ARM: at91/dt: define sam9x5 clocks 2014-05-22 18:03:13 +02:00
at91sam9x5_macb0.dtsi ARM: at91/dt: define sam9x5 clocks 2014-05-22 18:03:13 +02:00
at91sam9x5_macb1.dtsi ARM: at91/dt: define sam9x5 clocks 2014-05-22 18:03:13 +02:00
at91sam9x5_usart3.dtsi ARM: at91/dt: define sam9x5 clocks 2014-05-22 18:03:13 +02:00
at91sam9x5cm.dtsi ARM: at91/dt: sam9x5 crystals under the clocks node 2014-07-09 18:02:44 +02:00
at91sam9x5ek.dtsi ARM: SoC DT updates for 3.12 2013-09-06 13:26:27 -07:00
at91sam9x25.dtsi ARM: at91/dt: split sam9x5 peripheral definitions 2013-10-16 15:47:07 +02:00
at91sam9x25ek.dts
at91sam9x35.dtsi ARM: at91/dt: split sam9x5 peripheral definitions 2013-10-16 15:47:07 +02:00
at91sam9x35ek.dts
at91sam9260.dtsi ARM: at91/dt: sam9260: define clocks 2014-07-09 19:05:13 +02:00
at91sam9261.dtsi ARM: at91/dt: sam9261 crystals under the clocks node 2014-07-09 18:02:43 +02:00
at91sam9261ek.dts ARM: at91/dt: sam9261 crystals under the clocks node 2014-07-09 18:02:43 +02:00
at91sam9263.dtsi ARM: at91/dt: sam9263: define clocks 2014-07-09 19:05:21 +02:00
at91sam9263ek.dts ARM: at91/dt: sam9263ek: define crystals frequencies 2014-07-09 19:05:22 +02:00
atlas6-evb.dts
atlas6.dtsi ARM: SoC devicetree updates for 3.16 2014-06-02 16:34:00 -07:00
axm55xx.dtsi ARM: dts: axxia: Add reset controller 2014-05-23 18:18:46 +02:00
axm5516-amarillo.dts ARM: dts: Device tree for AXM55xx. 2014-05-23 18:18:45 +02:00
axm5516-cpus.dtsi ARM: dts: Device tree for AXM55xx. 2014-05-23 18:18:45 +02:00
bcm2835-rpi-b.dts ARM: bcm2835: add USB controller to device tree 2014-01-02 12:08:03 -08:00
bcm2835.dtsi ARM: bcm2835: fix clock DT node names 2014-02-24 19:40:27 -07:00
bcm4708-netgear-r6250.dts ARM: BCM5301X: add dts files for BCM4708 SoC 2014-02-19 09:15:59 -05:00
bcm4708.dtsi ARM: BCM5301X: add dts files for BCM4708 SoC 2014-02-19 09:15:59 -05:00
bcm5301x.dtsi ARM: BCM5301X: add dts files for BCM4708 SoC 2014-02-19 09:15:59 -05:00
bcm7445-bcm97445svmb.dts ARM: brcmstb: dts: add a reference DTS for Broadcom 7445 2014-07-28 10:01:46 -04:00
bcm7445.dtsi ARM: brcmstb: dts: add a reference DTS for Broadcom 7445 2014-07-28 10:01:46 -04:00
bcm11351.dtsi ARM: dts: enable SMP support for bcm28155 2014-07-28 09:41:44 -04:00
bcm21664-garnet.dts ARM: dts: bcm21664: Add device tree files. 2014-03-14 12:22:37 -04:00
bcm21664.dtsi ARM: dts: enable SMP support for bcm21664 2014-07-28 09:41:54 -04:00
bcm28155-ap.dts ARM: dts: Enable the PWM for bcm28155 AP board 2014-04-28 11:14:47 -04:00
bcm59056.dtsi ARM: dts: bcm590xx: add support for GPLDO and VBUS regulators 2014-05-23 08:07:01 -04:00
berlin2-sony-nsz-gs7.dts ARM: add Armada 1500 and Sony NSZ-GS7 device tree files 2013-12-13 16:31:05 +01:00
berlin2.dtsi ARM: dts: berlin: add SMP related nodes and properties for BG2 2014-06-16 13:17:53 +02:00
berlin2cd-google-chromecast.dts ARM: add Armada 1500-mini and Chromecast device tree files 2013-12-13 16:31:06 +01:00
berlin2cd.dtsi ARM: dts: berlin: add the pinctrl node and muxing setup for uarts 2014-05-19 23:02:31 +02:00
berlin2q-marvell-dmp.dts ARM: dts: berlin: enable i2c0 and i2c2 2014-06-16 13:17:36 +02:00
berlin2q.dtsi ARM: dts: berlin: add SMP related nodes and properties for BG2Q 2014-06-16 13:17:53 +02:00
cros-ec-keyboard.dtsi ARM: dts: Create a cros-ec-keyboard fragment 2014-06-16 12:11:31 -06:00
da850-enbw-cmc.dts ARM: davinci: da850: Use #include for all device trees 2013-06-20 15:04:30 +05:30
da850-evm.dts ARM: davinci: da850 evm: add GPIO pinumux entries DT node 2013-12-15 18:40:49 +05:30
da850.dtsi ARM: davinci: da850: add GPIO DT node 2013-12-15 18:35:37 +05:30
dove-cm-a510.dts ARM: dove: use preprocessor on device tree files 2013-09-30 15:00:35 +00:00
dove-cubox-es.dts ARM: dts: mvebu: split SolidRun CuBox into variants 2014-06-20 23:46:25 +00:00
dove-cubox.dts ARM: dts: mvebu: split SolidRun CuBox into variants 2014-06-20 23:46:25 +00:00
dove-d2plug.dts ARM: dove: use preprocessor on device tree files 2013-09-30 15:00:35 +00:00
dove-d3plug.dts ARM: dove: add initial DT file for Globalscale D3Plug 2013-09-30 15:00:54 +00:00
dove-dove-db.dts ARM: dove: use preprocessor on device tree files 2013-09-30 15:00:35 +00:00
dove.dtsi ARM: dts: dove: add DT LCD controllers 2014-07-25 00:07:22 +00:00
dra7-evm.dts arm: Xilinx Zynq dt patches for v3.17 2014-07-19 12:16:34 -07:00
dra7.dtsi ARM: SoC device-tree changes for 3.17 2014-08-08 11:16:58 -07:00
dra7xx-clocks.dtsi arm: Xilinx Zynq dt patches for v3.17 2014-07-19 12:16:34 -07:00
dra72-evm.dts ARM: dts: Add support for DRA72x family of devices 2014-05-06 10:20:14 -07:00
dra72x.dtsi ARM: dts: Add support for DRA72x family of devices 2014-05-06 10:20:14 -07:00
dra74x.dtsi ARM: dts: Add support for DRA72x family of devices 2014-05-06 10:20:14 -07:00
ea3250.dts
ecx-2000.dts ARM: dts: calxeda: move memory-controller node out of ecx-common.dtsi 2013-11-04 17:01:05 -06:00
ecx-common.dtsi EDAC updates for 3.13 2013-11-18 14:50:17 -08:00
efm32gg-dk3750.dts ARM: efm32: properly namespace i2c location property 2014-03-14 16:04:30 +01:00
efm32gg.dtsi ARM: efm32: fix unit address part in USART2 device nodes' names 2014-03-14 16:04:15 +01:00
elpida_ecb240abacn.dtsi
emev2-kzm9d.dts ARM: shmobile: emev2: Use interrupt macros in DT files 2013-12-10 17:27:20 +09:00
emev2.dtsi ARM: shmobile: Update EMEV2 DTS to include CPU frequency 2014-06-17 17:27:54 +09:00
ethernut5.dts ARM: at91/dt: ethernut5: define crystals frequencies 2014-07-09 19:05:17 +02:00
evk-pro3.dts ARM: at91/dt: evk-pro3: define slow crytal frequency 2014-07-09 19:05:17 +02:00
exynos4.dtsi ARM: SoC device-tree changes for 3.17 2014-08-08 11:16:58 -07:00
exynos4x12-pinctrl.dtsi ARM: dts: Add pinctrl entries for Exynos4x12 FIMC-IS peripherals 2013-08-06 02:49:43 +09:00
exynos4x12.dtsi ARM: SoC device-tree changes for 3.17 2014-08-08 11:16:58 -07:00
exynos5.dtsi Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linux 2014-08-07 17:36:12 -07:00
exynos3250-pinctrl.dtsi ARM: dts: add dts files for exynos3250 SoC 2014-05-31 02:09:17 +09:00
exynos3250.dtsi ARM: SoC device-tree changes for 3.17 2014-08-08 11:16:58 -07:00
exynos4210-origen.dts ARM: dts: use key code macros on Origen and Arndale boards 2014-05-31 02:06:51 +09:00
exynos4210-pinctrl.dtsi ARM: dts: Add Exynos4210 SoC camera port pinctrl nodes 2013-08-07 01:08:24 +09:00
exynos4210-smdkv310.dts ARM: dts: fix the chip select gpios definition in the SPI nodes 2014-07-17 19:37:50 +01:00
exynos4210-trats.dts ARM: dts: Enable USB gadget functionality for exynos4210-trats 2014-05-23 02:34:11 +09:00
exynos4210-universal_c210.dts ARM: dts: add external sd card node for exynos4210-universal_c210 2014-05-23 02:34:14 +09:00
exynos4210.dtsi ARM: SoC device-tree changes for 3.17 2014-08-08 11:16:58 -07:00
exynos4212.dtsi Exynos cleanup for v3.15 2014-03-29 02:03:39 +01:00
exynos4412-odroid-common.dtsi ARM: dts: Add sound nodes for Odroid-X2/U3 boards 2014-07-16 03:16:44 +09:00
exynos4412-odroidu3.dts ARM: dts: Add sound nodes for Odroid-X2/U3 boards 2014-07-16 03:16:44 +09:00
exynos4412-odroidx.dts ARM: dts: add support for GPIO buttons for exynos4412-odroid 2014-07-16 02:54:07 +09:00
exynos4412-odroidx2.dts ARM: dts: Add sound nodes for Odroid-X2/U3 boards 2014-07-16 03:16:44 +09:00
exynos4412-origen.dts ARM: dts: use key code macros on Origen and Arndale boards 2014-05-31 02:06:51 +09:00
exynos4412-smdk4412.dts ARM: dts: Update Exynos DT files with generic compatible strings 2014-03-21 02:17:22 +09:00
exynos4412-tiny4412.dts ARM: dts: Update Exynos DT files with generic compatible strings 2014-03-21 02:17:22 +09:00
exynos4412-trats2.dts ARM: dts: fix the chip select gpios definition in the SPI nodes 2014-07-17 19:37:50 +01:00
exynos4412.dtsi ARM: dts: clean up arm-pmu node for exynos4 2014-07-19 03:11:48 +09:00
exynos5250-arndale.dts ARM: SoC devicetree updates for 3.16 2014-06-02 16:34:00 -07:00
exynos5250-cros-common.dtsi ARM: dts: cypress,cyapa trackpad is exynos5250-Snow only 2014-07-30 07:53:07 +09:00
exynos5250-pinctrl.dtsi ARM: dts: Add pwmX_out pinctrl nodes to exynos5250 2014-05-19 23:14:02 +09:00
exynos5250-smdk5250.dts ARM: SoC device-tree changes for 3.17 2014-08-08 11:16:58 -07:00
exynos5250-snow.dts Samsung DT 2nd updates for v3.17 2014-07-31 20:17:53 -07:00
exynos5250.dtsi ARM: dts: exynos: Update PMU node with CLKOUT related data 2014-07-26 02:47:10 +02:00
exynos5260-pinctrl.dtsi ARM: dts: add dts files for exynos5260 SoC 2014-05-31 02:09:04 +09:00
exynos5260-xyref5260.dts ARM: dts: add dts file for exynos5260-xyref5260 board 2014-05-31 02:09:10 +09:00
exynos5260.dtsi ARM: SoC device-tree changes for 3.17 2014-08-08 11:16:58 -07:00
exynos5410-smdk5410.dts ARM: dts: add dts files for exynos5410 and exynos5410-smdk5410 2014-05-31 02:09:18 +09:00
exynos5410.dtsi ARM: SoC device-tree changes for 3.17 2014-08-08 11:16:58 -07:00
exynos5420-arndale-octa.dts Samsung 3rd DT updates for v3.16 2014-05-30 21:21:10 -07:00
exynos5420-peach-pit.dts ARM: dts: Add cros_ec to exynos5420-peach-pit and exynos5800-peach-pi 2014-07-19 04:09:15 +09:00
exynos5420-pinctrl.dtsi ARM: dts: Add pwmX_out pinctrl nodes to exynos5420 2014-05-09 06:06:10 +09:00
exynos5420-smdk5420.dts ARM: dts: Add MFC memory banks to exynos5420 boards 2014-05-20 01:04:13 +09:00
exynos5420.dtsi ARM: dts: exynos5420: remove disp_pd 2014-08-09 08:25:50 -07:00
exynos5440-sd5v1.dts ARM: dts: Update Exynos DT files with generic compatible strings 2014-03-21 02:17:22 +09:00
exynos5440-ssdk5440.dts ARM: dts: Update Exynos DT files with generic compatible strings 2014-03-21 02:17:22 +09:00
exynos5440.dtsi ARM: dts: SAMSUNG: Add aliases of UART nodes 2014-07-09 17:22:55 -07:00
exynos5800-peach-pi.dts ARM: dts: Add cros_ec to exynos5420-peach-pit and exynos5800-peach-pi 2014-07-19 04:09:15 +09:00
exynos5800.dtsi ARM: dts: add mfc node for exynos5800 2014-05-31 02:09:17 +09:00
ge863-pro3.dtsi ARM: at91/dt: ge863-pro3: define main crystal frequency 2014-07-09 19:05:16 +02:00
hi3620-hi4511.dts ARM: dts: rename hi4511 dts file 2013-12-20 08:23:01 -08:00
hi3620.dtsi ARM: SoC platform changes for 3.17 2014-08-08 11:14:29 -07:00
highbank.dts ARM: dts: calxeda: move memory-controller node out of ecx-common.dtsi 2013-11-04 17:01:05 -06:00
hisi-x5hd2-dkb.dts ARM: hisi: remove smp from machine descriptor 2014-07-30 22:32:21 -07:00
hisi-x5hd2.dtsi ARM: dts: Add hix5hd2-dkb dts file. 2014-07-30 22:32:21 -07:00
imx6dl-aristainetos_4.dts ARM: dts: imx6: add aristainetos board support 2014-07-18 16:49:38 +08:00
imx6dl-aristainetos_7.dts ARM: dts: imx6: add aristainetos board support 2014-07-18 16:49:38 +08:00
imx6dl-cubox-i.dts ARM: imx: initial SolidRun Cubox-i support 2014-01-27 14:21:01 +00:00
imx6dl-dfi-fs700-m60.dts ARM: dts: imx6: Add DFI FS700-M60 board support 2014-02-10 16:27:40 +08:00
imx6dl-gw51xx.dts ARM: dts: imx6: ventana: update model to reflect Dual/Solo CPU types 2014-07-18 16:49:32 +08:00
imx6dl-gw52xx.dts ARM: dts: imx6: ventana: update model to reflect Dual/Solo CPU types 2014-07-18 16:49:32 +08:00
imx6dl-gw53xx.dts ARM: dts: imx6: ventana: update model to reflect Dual/Solo CPU types 2014-07-18 16:49:32 +08:00
imx6dl-gw54xx.dts ARM: dts: imx6: ventana: update model to reflect Dual/Solo CPU types 2014-07-18 16:49:32 +08:00
imx6dl-hummingboard.dts ARM: dts: hummingboard/cubox-i: move usb otg configuration to platform level 2014-06-17 22:00:07 +08:00
imx6dl-nitrogen6x.dts ARM: dts: imx: add nitrogen6x board 2014-02-09 21:29:32 +08:00
imx6dl-phytec-pbab01.dts ARM: dts: Add Phytec pbab01 with i.MX6 DualLite/Solo 2014-05-16 23:01:53 +08:00
imx6dl-phytec-pfla02.dtsi ARM: dts: Add Phytec pfla02 with i.MX6 DualLite/Solo 2014-05-16 23:01:52 +08:00
imx6dl-pinfunc.h ARM: dts: imx: pinfunc: add MX6QDL_PAD_GPIO_6__ENET_IRQ 2014-02-09 21:29:44 +08:00
imx6dl-rex-basic.dts ARM: dts: add initial Rex Basic board support 2014-07-18 16:49:47 +08:00
imx6dl-riotboard.dts ARM: dts: imx6: RIoTboard explicitly define pad settings 2014-07-18 16:49:46 +08:00
imx6dl-sabreauto.dts ARM: dts: imx: share pad macro names between imx6q and imx6dl 2013-08-22 23:29:11 +08:00
imx6dl-sabrelite.dts ARM: dts: imx: sabrelite: add Dual Lite/Solo support 2014-02-09 21:29:16 +08:00
imx6dl-sabresd.dts ARM: dts: imx: share pad macro names between imx6q and imx6dl 2013-08-22 23:29:11 +08:00
imx6dl-tx6dl-comtft.dts ARM: dts: imx6: add support for Ka-Ro TX6 modules 2014-07-18 16:49:35 +08:00
imx6dl-tx6u-801x.dts ARM: dts: imx6: add support for Ka-Ro TX6 modules 2014-07-18 16:49:35 +08:00
imx6dl-tx6u-811x.dts ARM: dts: imx6: add support for Ka-Ro TX6 modules 2014-07-18 16:49:35 +08:00
imx6dl-wandboard-revb1.dts ARM: dts: Restructure imx6qdl-wandboard.dtsi for new rev C1 board. 2014-07-18 16:49:45 +08:00
imx6dl-wandboard.dts ARM: dts: Restructure imx6qdl-wandboard.dtsi for new rev C1 board. 2014-07-18 16:49:45 +08:00
imx6dl.dtsi ARM: dts: imx6qdl: use DT macro for clock ID 2014-07-18 16:49:38 +08:00
imx6q-arm2.dts ARM: dts: imx6q-arm2: use GPIO_6 for FEC interrupt. 2014-02-10 16:27:27 +08:00
imx6q-cm-fx6.dts ARM: dts: Add initial support for cm-fx6. 2014-02-09 21:28:55 +08:00
imx6q-cubox-i.dts ARM: dts: cubox-i: disable spread-spectrum for Cubox-i eSATA 2014-07-18 16:49:40 +08:00
imx6q-dfi-fs700-m60.dts ARM: dts: imx6: Add DFI FS700-M60 board support 2014-02-10 16:27:40 +08:00
imx6q-dmo-edmqmx6.dts ARM: dts: imx6: edmqmx6: Add can bus 2014-07-18 16:49:43 +08:00
imx6q-gk802.dts ARM: dts: Add stdout-path property to i.MX boards 2014-05-16 23:02:07 +08:00
imx6q-gw51xx.dts ARM: dts: imx6: ventana: update model to reflect Dual/Solo CPU types 2014-07-18 16:49:32 +08:00
imx6q-gw52xx.dts ARM: dts: imx6: ventana: update model to reflect Dual/Solo CPU types 2014-07-18 16:49:32 +08:00
imx6q-gw53xx.dts ARM: dts: imx6: ventana: update model to reflect Dual/Solo CPU types 2014-07-18 16:49:32 +08:00
imx6q-gw54xx.dts ARM: dts: imx6: ventana: update model to reflect Dual/Solo CPU types 2014-07-18 16:49:32 +08:00
imx6q-gw5400-a.dts ARM: dts: imx: remove ssi fsl,mode for audio cards 2014-07-18 16:49:37 +08:00
imx6q-nitrogen6x.dts ARM: dts: imx: add nitrogen6x board 2014-02-09 21:29:32 +08:00
imx6q-phytec-pbab01.dts ARM: dts: Add stdout-path property to i.MX boards 2014-05-16 23:02:07 +08:00
imx6q-phytec-pfla02.dtsi ARM: dts: Add Phytec pfla02 with i.MX6 DualLite/Solo 2014-05-16 23:01:52 +08:00
imx6q-pinfunc.h ARM: dts: imx: pinfunc: add MX6QDL_PAD_GPIO_6__ENET_IRQ 2014-02-09 21:29:44 +08:00
imx6q-rex-pro.dts ARM: dts: add initial Rex Pro board support 2014-07-18 16:49:46 +08:00
imx6q-sabreauto.dts ARM: dtsi: enable ahci sata on imx6q platforms 2013-08-22 23:29:25 +08:00
imx6q-sabrelite.dts ARM: dts: imx: sabrelite: add Dual Lite/Solo support 2014-02-09 21:29:16 +08:00
imx6q-sabresd.dts ARM: dts: imx6qdl: Add IPU DI ports and endpoints, move imx-drm node to dtsi 2014-03-07 16:17:59 +00:00
imx6q-sbc6x.dts ARM: dts: imx6qdl: make pinctrl nodes board specific 2014-02-09 21:28:56 +08:00
imx6q-tx6q-1010-comtft.dts ARM: dts: imx6: add support for Ka-Ro TX6 modules 2014-07-18 16:49:35 +08:00
imx6q-tx6q-1010.dts ARM: dts: imx6: add support for Ka-Ro TX6 modules 2014-07-18 16:49:35 +08:00
imx6q-tx6q-1020-comtft.dts ARM: dts: imx6: add support for Ka-Ro TX6 modules 2014-07-18 16:49:35 +08:00
imx6q-tx6q-1020.dts ARM: dts: imx6: add support for Ka-Ro TX6 modules 2014-07-18 16:49:35 +08:00
imx6q-tx6q-1110.dts ARM: dts: imx6: add support for Ka-Ro TX6 modules 2014-07-18 16:49:35 +08:00
imx6q-udoo.dts ARM: dts: imx6q-udoo: Add USB Host support 2014-07-18 16:49:34 +08:00
imx6q-wandboard-revb1.dts ARM: dts: Restructure imx6qdl-wandboard.dtsi for new rev C1 board. 2014-07-18 16:49:45 +08:00
imx6q-wandboard.dts ARM: dts: Restructure imx6qdl-wandboard.dtsi for new rev C1 board. 2014-07-18 16:49:45 +08:00
imx6q.dtsi ARM: dts: imx6qdl: use DT macro for clock ID 2014-07-18 16:49:38 +08:00
imx6qdl-aristainetos.dtsi ARM: dts: imx6: add aristainetos board support 2014-07-18 16:49:38 +08:00
imx6qdl-cubox-i.dtsi ARM: dts: hummingboard/cubox-i: move usb otg configuration to platform level 2014-06-17 22:00:07 +08:00
imx6qdl-dfi-fs700-m60.dtsi ARM: dts: Add stdout-path property to i.MX boards 2014-05-16 23:02:07 +08:00
imx6qdl-gw51xx.dtsi ARM: dts: imx6qdl-gw5xxx: Fix Linear Technology vendor prefix 2014-06-17 21:11:19 +08:00
imx6qdl-gw52xx.dtsi ARM: dts: imx: remove ssi fsl,mode for audio cards 2014-07-18 16:49:37 +08:00
imx6qdl-gw53xx.dtsi ARM: dts: imx: remove ssi fsl,mode for audio cards 2014-07-18 16:49:37 +08:00
imx6qdl-gw54xx.dtsi ARM: dts: imx: remove ssi fsl,mode for audio cards 2014-07-18 16:49:37 +08:00
imx6qdl-microsom-ar8035.dtsi ARM: dt: microsom: don't set bit 7 for ethernet mux settings 2014-04-14 10:22:37 +08:00
imx6qdl-microsom.dtsi ARM: dts: hummingboard/cubox-i: move usb otg configuration to platform level 2014-06-17 22:00:07 +08:00
imx6qdl-nitrogen6x.dtsi ARM: dts: imx: remove ssi fsl,mode for audio cards 2014-07-18 16:49:37 +08:00
imx6qdl-phytec-pbab01.dtsi ARM: dts: pbab01: Enable DVI 2014-05-16 23:01:56 +08:00
imx6qdl-phytec-pfla02.dtsi ARM: dts: pfla02: Add ethernet phy supply regulator 2014-07-18 16:49:33 +08:00
imx6qdl-rex.dtsi ARM: dts: add initial Rex Pro board support 2014-07-18 16:49:46 +08:00
imx6qdl-sabreauto.dtsi ARM: dts: imx6qdl-sabreauto: Support debug LED 2014-02-20 09:38:07 +08:00
imx6qdl-sabrelite.dtsi ARM: dts: imx: remove ssi fsl,mode for audio cards 2014-07-18 16:49:37 +08:00
imx6qdl-sabresd.dtsi ARM: dts: imx: remove ssi fsl,mode for audio cards 2014-07-18 16:49:37 +08:00
imx6qdl-tx6.dtsi ARM: dts: mx6: Disable the keypad in the dtsi files 2014-07-18 16:49:40 +08:00
imx6qdl-wandboard-revb1.dtsi ARM: dts: Restructure imx6qdl-wandboard.dtsi for new rev C1 board. 2014-07-18 16:49:45 +08:00
imx6qdl-wandboard-revc1.dtsi ARM: dts: Restructure imx6qdl-wandboard.dtsi for new rev C1 board. 2014-07-18 16:49:45 +08:00
imx6qdl-wandboard.dtsi ARM: dts: Restructure imx6qdl-wandboard.dtsi for new rev C1 board. 2014-07-18 16:49:45 +08:00
imx6qdl.dtsi ARM: imx6: Align ssi nodes between mx6 variants 2014-07-18 16:49:44 +08:00
imx6sl-evk.dts ARM: dts: imx: remove ssi fsl,mode for audio cards 2014-07-18 16:49:37 +08:00
imx6sl-pinfunc.h
imx6sl.dtsi ARM: imx6: Align ssi nodes between mx6 variants 2014-07-18 16:49:44 +08:00
imx6sx-pinfunc.h ARM: dts: imx: add pin function header for imx6sx 2014-07-18 16:49:30 +08:00
imx6sx-sdb.dts ARM: dts: imx6sx-sdb: Add audio support 2014-07-18 16:49:44 +08:00
imx6sx.dtsi ARM: imx6: Align ssi nodes between mx6 variants 2014-07-18 16:49:44 +08:00
imx23-evk.dts ARM: dts: imx: use generic node name for fixed regulator 2014-02-09 21:32:30 +08:00
imx23-olinuxino.dts ARM: dts: imx: use generic node name for fixed regulator 2014-02-09 21:32:30 +08:00
imx23-pinfunc.h ARM: dts: mxs: add pinctrl header files 2013-09-26 13:01:36 +08:00
imx23-stmp378x_devb.dts ARM: dts: imx: use generic node name for fixed regulator 2014-02-09 21:32:30 +08:00
imx23.dtsi ARM: dts: mxs: add mxs phy controller id 2014-02-09 21:33:36 +08:00
imx25-eukrea-cpuimx25.dtsi ARM: dts: Add support for the cpuimx25 board from Eukrea and its baseboard. 2014-02-09 21:33:21 +08:00
imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts ARM: dts: mbimxsd25: cmo-qvga: Fix lcd regulator 2014-07-18 16:49:37 +08:00
imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts ARM: dts: imx25: mbimxsd25: Add displays support. 2014-07-18 16:49:34 +08:00
imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts ARM: dts: imx25: mbimxsd25: Add displays support. 2014-07-18 16:49:34 +08:00
imx25-eukrea-mbimxsd25-baseboard.dts ARM: dts: imx: remove ssi fsl,mode for audio cards 2014-07-18 16:49:37 +08:00
imx25-karo-tx25.dts ARM: dts: Karo TX25: use hardware ecc 2014-05-16 23:02:11 +08:00
imx25-pdk.dts ARM: dts: imx25-pdk: Add USB OTG support 2014-07-18 16:49:42 +08:00
imx25-pinfunc.h ARM: dts: imx25: Add pinctrl functions. 2014-02-09 21:32:31 +08:00
imx25.dtsi ARM: dts: i.MX25: Fix gpt timers clocks. 2014-07-18 16:49:41 +08:00
imx27-apf27.dts ARM: dts: imx: add required #clock-cells for fixed-clock 2014-04-14 10:22:39 +08:00
imx27-apf27dev.dts ARM: dts: imx27-apf27dev: Add pinctrl for cspi, sdhci, leds and keys 2014-02-09 21:33:14 +08:00
imx27-eukrea-cpuimx27.dtsi ARM: dts: Add support for the cpuimx27 board from Eukrea and its baseboard 2014-07-18 16:49:31 +08:00
imx27-eukrea-mbimxsd27-baseboard.dts ARM: dts: imx: remove ssi fsl,mode for audio cards 2014-07-18 16:49:37 +08:00
imx27-pdk.dts ARM: i.MX27 clk: dts: Use clock defines in DTS files 2014-07-18 16:49:44 +08:00
imx27-phytec-phycard-s-rdk.dts ARM: dts: Add stdout-path property to i.MX boards 2014-05-16 23:02:07 +08:00
imx27-phytec-phycard-s-som.dtsi ARM: dts: imx27-phytec-phycard-s-som: Rename file to .dtsi 2014-02-13 09:57:32 +08:00
imx27-phytec-phycore-rdk.dts ARM: i.MX27 clk: dts: Use clock defines in DTS files 2014-07-18 16:49:44 +08:00
imx27-phytec-phycore-som.dtsi ARM: i.MX27 clk: dts: Use clock defines in DTS files 2014-07-18 16:49:44 +08:00
imx27-pinfunc.h pinctrl: i.MX27: Remove nonexistent pad definitions 2014-07-11 14:08:26 +02:00
imx27.dtsi ARM: i.MX27 clk: dts: Use clock defines in DTS files 2014-07-18 16:49:44 +08:00
imx28-apf28.dts ARM: dts: mxs: modify mx23/mx28 dts files to use pinctrl headers 2013-09-26 13:01:36 +08:00
imx28-apf28dev.dts ARM: dts: imx28-apf28dev: add user button 2014-02-09 21:33:45 +08:00
imx28-apx4devkit.dts ARM: dts: imx: use generic node name for fixed regulator 2014-02-09 21:32:30 +08:00
imx28-cfa10036.dts ARM: dt: imx28-cfa10036: introduce a regulator for mmc0 2014-07-18 16:49:32 +08:00
imx28-cfa10037.dts ARM: i.MX28: dts: rename usbphy pin names 2014-02-09 21:33:22 +08:00
imx28-cfa10049.dts ARM: i.MX28: dts: rename usbphy pin names 2014-02-09 21:33:22 +08:00
imx28-cfa10055.dts ARM: dts: mxs: modify mx23/mx28 dts files to use padconfig defines 2013-09-26 13:01:37 +08:00
imx28-cfa10056.dts ARM: dts: mxs: modify mx23/mx28 dts files to use padconfig defines 2013-09-26 13:01:37 +08:00
imx28-cfa10057.dts ARM: i.MX28: dts: rename usbphy pin names 2014-02-09 21:33:22 +08:00
imx28-cfa10058.dts ARM: i.MX28: dts: rename usbphy pin names 2014-02-09 21:33:22 +08:00
imx28-duckbill.dts ARM: dts: imx28-duckbill: use symbolic names from gpio.h 2014-05-16 23:01:48 +08:00
imx28-eukrea-mbmx28lc.dtsi ARM: mxs: Add support for the eukrea-cpuimx28. 2014-02-09 21:33:20 +08:00
imx28-eukrea-mbmx283lc.dts ARM: mxs: Add support for the eukrea-cpuimx28. 2014-02-09 21:33:20 +08:00
imx28-eukrea-mbmx287lc.dts ARM: mxs: Add support for the eukrea-cpuimx28. 2014-02-09 21:33:20 +08:00
imx28-evk.dts ARM: dts: imx28-evk: Run I2C0 at 400kHz 2014-02-09 21:33:00 +08:00
imx28-m28.dtsi ARM: dts: mxs: Split M28EVK into SoM and EVK parts 2014-07-18 16:49:41 +08:00
imx28-m28cu3.dts ARM: dts: imx28-m28cu3: Remove 'reset-active-high' 2014-02-09 21:33:52 +08:00
imx28-m28evk.dts ARM: dts: mxs: Split M28EVK into SoM and EVK parts 2014-07-18 16:49:41 +08:00
imx28-pinfunc.h ARM: dts: mxs: add pinctrl header files 2013-09-26 13:01:36 +08:00
imx28-sps1.dts ARM: i.MX28: dts: rename usbphy pin names 2014-02-09 21:33:22 +08:00
imx28-tx28.dts ARM: dts: imx28-tx28: Remove 'enable-active-low' property 2014-02-10 11:19:43 +08:00
imx28.dtsi ARM: dts: imx28: include gpio.h to allow use of symbolic names 2014-05-16 23:01:47 +08:00
imx31-bug.dts
imx31.dtsi ARM: dts: imx: Add the missing cpus node 2013-08-22 23:29:01 +08:00
imx35-eukrea-cpuimx35.dtsi ARM: dts: cpuimx35 Add touchscreen support. 2014-05-16 23:01:50 +08:00
imx35-eukrea-mbimxsd35-baseboard.dts ARM: dts: imx: remove ssi fsl,mode for audio cards 2014-07-18 16:49:37 +08:00
imx35-pdk.dts ARM: dts: imx35-pdk: Fix memory region description 2014-05-16 23:02:13 +08:00
imx35-pinfunc.h
imx35.dtsi ARM: dts: i.MX35: Add GPT node 2014-07-18 16:49:35 +08:00
imx50-evk.dts ARM: dts: imx: add device tree support for Freescale imx50evk board 2014-02-09 21:32:21 +08:00
imx50-pinfunc.h ARM: dts: imx: add device tree pin definitions for the IMX50 2014-02-09 21:32:18 +08:00
imx50.dtsi ARM: dts: imx50: add ssi dma properties 2014-07-18 16:49:36 +08:00
imx51-apf51.dts ARM: dts: i.MX51 boards: Switch to use standard GPIO flags definitions 2014-02-09 21:32:51 +08:00
imx51-apf51dev.dts ARM: SoC: device tree changes 2014-04-05 15:29:04 -07:00
imx51-babbage.dts ARM: dts: imx: remove ssi fsl,mode for audio cards 2014-07-18 16:49:37 +08:00
imx51-digi-connectcore-jsk.dts ARM i.MX51: Add Digi ConnectCore devicetree 2014-05-16 23:01:51 +08:00
imx51-digi-connectcore-som.dtsi ARM: dts: i.MX51: Allow to define partitions onto NFC 2014-05-16 23:01:56 +08:00
imx51-eukrea-cpuimx51.dtsi ARM: dts: cpuimx51 Add touchscreen support. 2014-05-16 23:01:50 +08:00
imx51-eukrea-mbimxsd51-baseboard.dts ARM: dts: imx: remove ssi fsl,mode for audio cards 2014-07-18 16:49:37 +08:00
imx51-pinfunc.h
imx51.dtsi ARM: dts: imx5: remove fsl,ssi-dma-events 2014-07-18 16:49:36 +08:00
imx53-ard.dts ARM: dts: imx: use generic node name for fixed regulator 2014-02-09 21:32:30 +08:00
imx53-m53.dtsi ARM: dts: mx5: Split M53EVK into SoM and EVK parts 2014-07-18 16:49:46 +08:00
imx53-m53evk.dts ARM: dts: mx5: Split M53EVK into SoM and EVK parts 2014-07-18 16:49:46 +08:00
imx53-mba53.dts ARM: dts: imx: remove ssi fsl,mode for audio cards 2014-07-18 16:49:37 +08:00
imx53-pinfunc.h
imx53-qsb-common.dtsi ARM: dts: imx: remove ssi fsl,mode for audio cards 2014-07-18 16:49:37 +08:00
imx53-qsb.dts ARM: dts: imx53: Add IPU DI ports and endpoints, move imx-drm node to dtsi 2014-03-07 16:17:58 +00:00
imx53-qsrb.dts ARM: dts: i.MX53: add support for MCIMX53-START-R 2014-02-09 21:33:43 +08:00
imx53-smd.dts ARM: dts: imx53: make pinctrl nodes board specific 2014-02-09 21:32:25 +08:00
imx53-tqma53.dtsi ARM: dts: imx: use generic node name for fixed regulator 2014-02-09 21:32:30 +08:00
imx53-tx53-x03x.dts ARM: dts: imx53-tx53: add IPU DI ports and endpoints 2014-04-14 10:22:38 +08:00
imx53-tx53-x13x.dts ARM: dts: imx53: add support for Ka-Ro TX53 modules 2014-02-09 21:33:48 +08:00
imx53-tx53.dtsi ARM: dts: imx: remove ssi fsl,mode for audio cards 2014-07-18 16:49:37 +08:00
imx53-voipac-bsb.dts ARM: dts: imx: remove ssi fsl,mode for audio cards 2014-07-18 16:49:37 +08:00
imx53-voipac-dmm-668.dtsi ARM: dts: i.MX53: dts for Voipac x53-dmm-668 module 2014-02-09 21:32:23 +08:00
imx53.dtsi ARM: dts: imx53: correct clock-names of SATA node 2014-07-18 16:49:45 +08:00
integrator.dtsi ARM: integrator: move EBI to the device tree 2013-12-04 16:22:31 +01:00
integratorap.dts ARM: integrator: get rid of <mach/memory.h> 2014-06-27 10:15:22 +02:00
integratorcp.dts ARM: integrator: define clocks in the device trees 2014-02-13 11:20:31 +01:00
k2e-clocks.dtsi ARM: dts: keystone: fix netcp's clocks definitions 2014-07-08 12:23:42 -04:00
k2e-evm.dts ARM: dts: keystone-evm: add spi nor flash support 2014-05-12 11:43:59 -04:00
k2e.dtsi ARM: dts: keystone: add support for k2 Edison SoC and EVM 2014-02-26 10:06:56 -05:00
k2hk-clocks.dtsi ARM: dts: keystone: fix netcp's clocks definitions 2014-07-08 12:23:42 -04:00
k2hk-evm.dts ARM: dts: keystone-evm: add 1g ethernet phys nodes 2014-07-17 13:29:06 -04:00
k2hk.dtsi ARM: dts: keystone: preparatory patch to support K2L and K2E SOCs 2014-02-26 10:06:56 -05:00
k2l-clocks.dtsi ARM: dts: keystone: fix netcp's clocks definitions 2014-07-08 12:23:42 -04:00
k2l-evm.dts ARM: dts: keystone-evm: add spi nor flash support 2014-05-12 11:43:59 -04:00
k2l.dtsi ARM: dts: keystone: add support for K2 Lamarr SoC and EVM 2014-02-26 10:06:56 -05:00
keystone-clocks.dtsi ARM: dts: keystone: fix netcp's clocks definitions 2014-07-08 12:23:42 -04:00
keystone.dtsi ARM: dts: keystone: add mdio devices entries 2014-07-17 13:29:05 -04:00
kirkwood-98dx4122.dtsi ARM: dts: kirkwood: resynch 98dx4122 dtsi 2014-05-16 17:56:51 +00:00
kirkwood-6192.dtsi ARM: dts: kirkwood: consolidate common pinctrl settings 2014-05-05 00:52:28 +00:00
kirkwood-6281.dtsi ARM: dts: kirkwood: consolidate common pinctrl settings 2014-05-05 00:52:28 +00:00
kirkwood-6282.dtsi ARM: dts: kirkwood: set default pinctrl for I2C1 on 6282 2014-05-05 00:53:24 +00:00
kirkwood-b3.dts mvebu DT changes for v3.16 2014-05-19 21:55:03 -07:00
kirkwood-cloudbox.dts mvebu DT changes for v3.16 2014-05-19 21:55:03 -07:00
kirkwood-d2net.dts ARM: Kirkwood: add DT support for d2 Network v2 2014-07-13 21:29:56 +00:00
kirkwood-db-88f6281.dts ARM: kirkwood: Remove kirkwood_setup_wins and rely on the DT binding 2013-10-01 16:28:03 +00:00
kirkwood-db-88f6282.dts ARM: kirkwood: Remove kirkwood_setup_wins and rely on the DT binding 2013-10-01 16:28:03 +00:00
kirkwood-db.dtsi ARM: dts: kirkwood: set default pinctrl for NAND 2014-05-05 00:53:06 +00:00
kirkwood-dns320.dts ARM: dts: kirkwood: set default pinctrl for UART0/1 2014-05-05 00:52:45 +00:00
kirkwood-dns325.dts ARM: dts: kirkwood: add stdout-path property to all boards 2014-05-05 00:48:35 +00:00
kirkwood-dnskw.dtsi ARM: dts: kirkwood: set default pinctrl for NAND 2014-05-05 00:53:06 +00:00
kirkwood-dockstar.dts ARM: dts: kirkwood: rename pin-controller nodes 2014-05-05 00:51:33 +00:00
kirkwood-dreamplug.dts mvebu DT changes for v3.16 2014-05-19 21:55:03 -07:00
kirkwood-ds109.dts ARM: dts: kirkwood: add stdout-path property to all boards 2014-05-05 00:48:35 +00:00
kirkwood-ds110jv10.dts ARM: dts: kirkwood: add stdout-path property to all boards 2014-05-05 00:48:35 +00:00
kirkwood-ds111.dts ARM: dts: kirkwood: add stdout-path property to all boards 2014-05-05 00:48:35 +00:00
kirkwood-ds112.dts ARM: dts: kirkwood: add stdout-path property to all boards 2014-05-05 00:48:35 +00:00
kirkwood-ds209.dts ARM: dts: kirkwood: add stdout-path property to all boards 2014-05-05 00:48:35 +00:00
kirkwood-ds210.dts ARM: dts: kirkwood: add stdout-path property to all boards 2014-05-05 00:48:35 +00:00
kirkwood-ds212.dts ARM: dts: kirkwood: add stdout-path property to all boards 2014-05-05 00:48:35 +00:00
kirkwood-ds212j.dts ARM: dts: kirkwood: add stdout-path property to all boards 2014-05-05 00:48:35 +00:00
kirkwood-ds409.dts ARM: dts: kirkwood: add stdout-path property to all boards 2014-05-05 00:48:35 +00:00
kirkwood-ds409slim.dts ARM: dts: kirkwood: add stdout-path property to all boards 2014-05-05 00:48:35 +00:00
kirkwood-ds411.dts ARM: dts: kirkwood: add stdout-path property to all boards 2014-05-05 00:48:35 +00:00
kirkwood-ds411j.dts ARM: dts: kirkwood: add stdout-path property to all boards 2014-05-05 00:48:35 +00:00
kirkwood-ds411slim.dts ARM: dts: kirkwood: add stdout-path property to all boards 2014-05-05 00:48:35 +00:00
kirkwood-goflexnet.dts ARM: dts: kirkwood: rename pin-controller nodes 2014-05-05 00:51:33 +00:00
kirkwood-guruplug-server-plus.dts ARM: dts: kirkwood: fix phy-connection-type for Guruplug 2014-06-23 21:48:16 +00:00
kirkwood-ib62x0.dts ARM: dts: kirkwood: set default pinctrl for NAND 2014-05-05 00:53:06 +00:00
kirkwood-iconnect.dts ARM: dts: kirkwood: rename pin-controller nodes 2014-05-05 00:51:33 +00:00
kirkwood-iomega_ix2_200.dts ARM: dts: kirkwood: rename pin-controller nodes 2014-05-05 00:51:33 +00:00
kirkwood-is2.dts ARM: SoC board updates for 3.12 2013-09-06 13:34:43 -07:00
kirkwood-km_common.dtsi ARM: dts: kirkwood: add kirkwood-km_common DTSI files 2014-05-16 17:57:19 +00:00
kirkwood-km_fixedeth.dts ARM: dts: kirkwood: add kirkwood-km_fixedeth DTS file 2014-05-16 17:57:27 +00:00
kirkwood-km_kirkwood.dts ARM: dts: kirkwood: add kirkwood-km_common DTSI files 2014-05-16 17:57:19 +00:00
kirkwood-laplug.dts mvebu DT changes for v3.16 2014-05-19 21:55:03 -07:00
kirkwood-lschlv2.dts ARM: kirkwood: Use the preprocessor on device tree files 2013-08-06 14:11:37 +00:00
kirkwood-lsxhl.dts ARM: kirkwood: Use the preprocessor on device tree files 2013-08-06 14:11:37 +00:00
kirkwood-lsxl.dtsi ARM: dts: kirkwood: rename pin-controller nodes 2014-05-05 00:51:33 +00:00
kirkwood-mplcec4.dts ARM: dts: kirkwood: set default pinctrl for NAND 2014-05-05 00:53:06 +00:00
kirkwood-mv88f6281gtw-ge.dts ARM: SoC devicetree updates for 3.16 2014-06-02 16:34:00 -07:00
kirkwood-net2big.dts ARM: Kirkwood: allow to use netxbig DTSI for d2net_v2 DTS 2014-07-13 21:22:49 +00:00
kirkwood-net5big.dts ARM: Kirkwood: allow to use netxbig DTSI for d2net_v2 DTS 2014-07-13 21:22:49 +00:00
kirkwood-netgear_readynas_duo_v2.dts ARM: dts: kirkwood: set default pinctrl for UART0/1 2014-05-05 00:52:45 +00:00
kirkwood-netgear_readynas_nv+_v2.dts ARM: dts: kirkwood: set default pinctrl for UART0/1 2014-05-05 00:52:45 +00:00
kirkwood-netxbig.dtsi ARM: Kirkwood: allow to use netxbig DTSI for d2net_v2 DTS 2014-07-13 21:22:49 +00:00
kirkwood-ns2-common.dtsi mvebu DT changes for v3.16 2014-05-19 21:55:03 -07:00
kirkwood-ns2.dts ARM: SoC board updates for 3.12 2013-09-06 13:34:43 -07:00
kirkwood-ns2lite.dts ARM: DT: Kirkwood: Use symbolic names from gpio.h 2013-12-08 01:00:54 +00:00
kirkwood-ns2max.dts ARM: DT: Kirkwood: Use symbolic names from gpio.h 2013-12-08 01:00:54 +00:00
kirkwood-ns2mini.dts ARM: DT: Kirkwood: Use symbolic names from gpio.h 2013-12-08 01:00:54 +00:00
kirkwood-nsa3x0-common.dtsi ARM: SoC devicetree updates for 3.16 2014-06-02 16:34:00 -07:00
kirkwood-nsa310.dts mvebu DT changes for v3.16 2014-05-19 21:55:03 -07:00
kirkwood-nsa310a.dts mvebu DT changes for v3.16 2014-05-19 21:55:03 -07:00
kirkwood-nsa320.dts ARM: dts: kirkwood: rename pin-controller nodes 2014-05-05 00:51:33 +00:00
kirkwood-openblocks_a6.dts mvebu DT changes for v3.16 2014-05-19 21:55:03 -07:00
kirkwood-openblocks_a7.dts mvebu DT changes for v3.16 2014-05-19 21:55:03 -07:00
kirkwood-openrd-base.dts ARM: Kirkwood: DT versions of OpenRD boards 2014-05-16 05:20:38 +00:00
kirkwood-openrd-client.dts ARM: Kirkwood: DT versions of OpenRD boards 2014-05-16 05:20:38 +00:00
kirkwood-openrd-ultimate.dts ARM: Kirkwood: DT versions of OpenRD boards 2014-05-16 05:20:38 +00:00
kirkwood-openrd.dtsi ARM: Kirkwood: DT versions of OpenRD boards 2014-05-16 05:20:38 +00:00
kirkwood-rd88f6192.dts ARM: dts: kirkwood: set default pinctrl for SPI0 2014-05-05 00:52:55 +00:00
kirkwood-rd88f6281-a0.dts ARM: Kirkwood: convert rd88f6281-setup.c to DT. 2014-02-17 03:01:25 +00:00
kirkwood-rd88f6281-a1.dts ARM: Kirkwood: convert rd88f6281-setup.c to DT. 2014-02-17 03:01:25 +00:00
kirkwood-rd88f6281.dtsi ARM: dts: kirkwood: rename pin-controller nodes 2014-05-05 00:51:33 +00:00
kirkwood-rs212.dts ARM: dts: kirkwood: add stdout-path property to all boards 2014-05-05 00:48:35 +00:00
kirkwood-rs409.dts ARM: dts: kirkwood: add stdout-path property to all boards 2014-05-05 00:48:35 +00:00
kirkwood-rs411.dts ARM: dts: kirkwood: add stdout-path property to all boards 2014-05-05 00:48:35 +00:00
kirkwood-sheevaplug-common.dtsi ARM: dts: kirkwood: set default pinctrl for NAND 2014-05-05 00:53:06 +00:00
kirkwood-sheevaplug-esata.dts ARM: DT: Kirkwood: Use symbolic names from gpio.h 2013-12-08 01:00:54 +00:00
kirkwood-sheevaplug.dts ARM: DT: Kirkwood: Use symbolic names from gpio.h 2013-12-08 01:00:54 +00:00
kirkwood-synology.dtsi ARM: dts: kirkwood: set default pinctrl for I2C0 2014-05-05 00:53:15 +00:00
kirkwood-t5325.dts ARM: Kirkwood: t5325: Use simple card to instantiate audio 2014-05-05 01:18:45 +00:00
kirkwood-topkick.dts ARM: dts: kirkwood: set default pinctrl for I2C0 2014-05-05 00:53:15 +00:00
kirkwood-ts219-6281.dts ARM: dts: kirkwood: rename pin-controller nodes 2014-05-05 00:51:33 +00:00
kirkwood-ts219-6282.dts ARM: dts: kirkwood: rename pin-controller nodes 2014-05-05 00:51:33 +00:00
kirkwood-ts219.dtsi ARM: dts: kirkwood: set default pinctrl for I2C0 2014-05-05 00:53:15 +00:00
kirkwood-ts419-6281.dts ARM: Kirkwood: Add DT description of QNAP 419 2014-02-05 02:22:07 +00:00
kirkwood-ts419-6282.dts ARM: Kirkwood: Add DT description of QNAP 419 2014-02-05 02:22:07 +00:00
kirkwood-ts419.dtsi ARM: dts: kirkwood: rename pin-controller nodes 2014-05-05 00:51:33 +00:00
kirkwood.dtsi ARM: Kirkwood: DT: Add missing #sound-dai-cells property 2014-05-05 01:18:44 +00:00
kizbox.dts ARM: at91/dt: kizbox: define main crystal frequency 2014-07-09 19:05:18 +02:00
lpc32xx.dtsi
marco-evb.dts
marco.dtsi ARM: l2c: prima2: convert to generic l2c OF initialisation 2014-05-30 00:49:55 +01:00
mmp2-brownstone.dts
mmp2.dtsi
moxart-uc7112lx.dts ARM: moxart: move fixed rate clock child node to board level dts 2014-01-23 18:13:44 -08:00
moxart.dtsi ARM: moxart: move fixed rate clock child node to board level dts 2014-01-23 18:13:44 -08:00
mpa1600.dts ARM: at91/dt: mpa1600: define crytals frequencies 2014-07-09 19:05:16 +02:00
mt6589-aquaris5.dts arm: mediatek: add dts for Aquaris5 mobile phone 2014-07-22 17:52:38 +02:00
mt6589.dtsi arm: add basic support for Mediatek MT6589 boards 2014-07-22 17:52:37 +02:00
mxs-pinfunc.h ARM: dts: mxs: add pinctrl header files 2013-09-26 13:01:36 +08:00
nspire-classic.dtsi arm: Add device trees for TI-Nspire hardware 2013-06-21 20:06:29 +02:00
nspire-clp.dts arm: Add device trees for TI-Nspire hardware 2013-06-21 20:06:29 +02:00
nspire-cx.dts arm: Add device trees for TI-Nspire hardware 2013-06-21 20:06:29 +02:00
nspire-tp.dts arm: Add device trees for TI-Nspire hardware 2013-06-21 20:06:29 +02:00
nspire.dtsi arm: Add device trees for TI-Nspire hardware 2013-06-21 20:06:29 +02:00
omap-gpmc-smsc911x.dtsi ARM: dts: Fix GPMC timings for LAN9220 2014-04-23 11:30:09 -07:00
omap-gpmc-smsc9221.dtsi ARM: dts: omap: Add common file for SMSC9221 2014-03-12 10:18:16 -07:00
omap-zoom-common.dtsi ARM: OMAP2+: Fix GPMC and simplify bootloader timings for 8250 and smc91x 2013-11-15 14:33:26 -08:00
omap2.dtsi ARM: dts: OMAP2: Fix interrupts for OMAP2420 mailbox 2014-04-25 09:53:43 -07:00
omap3-beagle-xm-ab.dts ARM: dts: Add support for the BeagleBoard xM A/B 2014-04-18 16:50:23 -07:00
omap3-beagle-xm.dts ARM: dts: Enable twl4030 off-idle configuration for selected omaps 2014-06-16 01:10:22 -07:00
omap3-beagle.dts ARM: omap3-beagle.dts: add display information 2014-03-19 11:11:27 +02:00
omap3-cm-t3x.dtsi ARM: dts: cm-t3x30: add HS USB Host support 2014-02-28 14:09:11 -08:00
omap3-cm-t3x30.dtsi ARM: dts: Fix GPMC Ethernet timings for omap cm-t sbc-t boards for device tree 2014-04-23 11:29:49 -07:00
omap3-cm-t3517.dts ARM: dts: sbc-t3517: add support for sbc-t3517 2014-02-28 14:09:14 -08:00
omap3-cm-t3530.dts ARM: dts: Add MMC2/SDIO/WLAN support for cm-t3530 2014-03-12 10:40:37 -07:00
omap3-cm-t3730.dts ARM: dts: sbc-t3x: refactor DT support 2014-02-28 14:09:08 -08:00
omap3-devkit8000.dts ARM: dts: OMAP2+: remove uses of obsolete gpmc,device-nand 2014-04-18 16:37:43 -07:00
omap3-evm-37xx.dts fbdev changes for 3.16 (omap devicetree) 2014-06-09 18:32:13 -07:00
omap3-evm-common.dtsi ARM: dts: Enable twl4030 off-idle configuration for selected omaps 2014-06-16 01:10:22 -07:00
omap3-evm.dts ARM: dts: Add common support for omap3-evm 2013-10-14 11:34:37 -07:00
omap3-gta04.dts ARM: dts: omap3-gta04: Add display support 2014-06-03 10:22:21 +03:00
omap3-igep.dtsi ARM: dts: omap3-igep0020: use SMSC9221 timings 2014-04-25 09:30:00 -07:00
omap3-igep0020.dts ARM: dts: omap3-igep0020: use SMSC9221 timings 2014-04-25 09:30:00 -07:00
omap3-igep0030.dts ARM: dts: omap3-igep: fix boot fail due wrong compatible match 2014-02-28 11:29:18 -08:00
omap3-ldp.dts fbdev changes for 3.16 (omap devicetree) 2014-06-09 18:32:13 -07:00
omap3-lilly-a83x.dtsi ARM: dts: omap3 a83x: fix duplicate usb pin config 2014-05-27 13:51:01 -07:00
omap3-lilly-dbb056.dts ARM: dts: omap3: Add support for INCOstartec DBB056 baseboard 2014-02-28 15:04:28 -08:00
omap3-n9.dts ARM: dts: N9/N950: fix boot hang with 3.14-rc1 2014-02-13 15:21:36 -08:00
omap3-n900.dts ARM: dts: Revert enabling of twl configuration for n900 2014-07-29 00:16:25 -07:00
omap3-n950-n9.dtsi ARM: dts: n950: Add missing regulator definitions 2014-05-06 10:19:49 -07:00
omap3-n950.dts ARM: dts: N9/N950: fix boot hang with 3.14-rc1 2014-02-13 15:21:36 -08:00
omap3-overo-alto35-common.dtsi ARM: dts: overo: Add support for 3.5'' LCD output 2014-06-03 10:22:23 +03:00
omap3-overo-alto35.dts ARM: dts: Add support for the Overo Alto35 2014-03-12 10:21:14 -07:00
omap3-overo-base.dtsi ARM: dts: overo: Push uart3 pinmux down to expansion board 2014-03-12 10:18:16 -07:00
omap3-overo-chestnut43-common.dtsi ARM: dts: overo: Add support for 4.3'' LCD output 2014-06-03 10:22:22 +03:00
omap3-overo-chestnut43.dts ARM: dts: Add support for the Overo Chestnut43 2014-03-12 10:21:15 -07:00
omap3-overo-common-dvi.dtsi ARM: dts: overo: Add support for DVI output 2014-06-03 10:22:22 +03:00
omap3-overo-common-lcd35.dtsi ARM: dts: overo: Add support for 3.5'' LCD output 2014-06-03 10:22:23 +03:00
omap3-overo-common-lcd43.dtsi ARM: dts: overo: Add support for 4.3'' LCD output 2014-06-03 10:22:22 +03:00
omap3-overo-common-peripherals.dtsi ARM: dts: overo: Add LIS33DE accelerometer 2014-03-12 10:21:12 -07:00
omap3-overo-gallop43-common.dtsi ARM: dts: overo: Add support for 4.3'' LCD output 2014-06-03 10:22:22 +03:00
omap3-overo-gallop43.dts ARM: dts: Add support for the Overo Gallop43 2014-03-12 10:21:14 -07:00
omap3-overo-palo43-common.dtsi ARM: dts: overo: Add support for 4.3'' LCD output 2014-06-03 10:22:22 +03:00
omap3-overo-palo43.dts ARM: dts: Add support for the Overo Palo43 2014-03-12 10:21:13 -07:00
omap3-overo-storm-alto35.dts ARM: dts: Add support for the Overo Alto35 2014-03-12 10:21:14 -07:00
omap3-overo-storm-chestnut43.dts ARM: dts: Add support for the Overo Chestnut43 2014-03-12 10:21:15 -07:00
omap3-overo-storm-gallop43.dts ARM: dts: Add support for the Overo Gallop43 2014-03-12 10:21:14 -07:00
omap3-overo-storm-palo43.dts ARM: dts: Add support for the Overo Palo43 2014-03-12 10:21:13 -07:00
omap3-overo-storm-summit.dts ARM: dts: Add support for the Overo Summit 2014-03-12 10:21:16 -07:00
omap3-overo-storm-tobi.dts ARM: dts: overo: reorganize include files 2014-03-12 10:17:25 -07:00
omap3-overo-storm.dtsi ARM: dts: omap3-overo: Add HSUSB PHY 2014-03-12 10:17:27 -07:00
omap3-overo-summit-common.dtsi ARM: dts: overo: Add support for DVI output 2014-06-03 10:22:22 +03:00
omap3-overo-summit.dts ARM: dts: Add support for the Overo Summit 2014-03-12 10:21:16 -07:00
omap3-overo-tobi-common.dtsi ARM: dts: overo: Add support for DVI output 2014-06-03 10:22:22 +03:00
omap3-overo-tobi.dts ARM: dts: overo: reorganize include files 2014-03-12 10:17:25 -07:00
omap3-overo.dtsi Merge branch '3.15/dss-dt-dts' into 3.15/fbdev 2014-03-20 08:18:27 +02:00
omap3-panel-sharp-ls037v7dw01.dtsi ARM: dts: Add LCD panel sharp ls037v7dw01 support for omap3-evm and ldp 2014-06-03 10:22:21 +03:00
omap3-sb-t35.dtsi ARM: dts: Fix GPMC timings for LAN9220 2014-04-23 11:30:09 -07:00
omap3-sbc-t3517.dts ARM: dts: Fix GPMC Ethernet timings for omap cm-t sbc-t boards for device tree 2014-04-23 11:29:49 -07:00
omap3-sbc-t3530.dts ARM: dts: sbc-t3530: add support for sbc-t3530 2014-02-28 14:09:13 -08:00
omap3-sbc-t3730.dts ARM: dts: sbc-t3730: add pinmux for usb hub reset 2014-02-28 14:09:12 -08:00
omap3-zoom3.dts ARM: dts: Split omap3 pinmux core device 2014-01-07 14:01:39 -08:00
omap3.dtsi ARM: dts: OMAP2+: Add mailbox fifo and user information 2014-07-15 05:08:11 -07:00
omap3xxx-clocks.dtsi ARM: dts: set 'ti,set-rate-parent' for dpll4_m5 path 2014-05-16 17:08:57 +03:00
omap4-cpu-thermal.dtsi arm: dts: add omap4 CPU thermal data 2013-12-04 09:34:25 -04:00
omap4-duovero-parlor.dts ARM: dts: duovero-parlor: Add HDMI output 2014-06-03 10:22:23 +03:00
omap4-duovero.dtsi ARM: dts: Enable mcpdm and mcbsp1 on DuoVero 2014-05-19 17:20:31 -07:00
omap4-panda-a4.dts ARM: dts: OMAP2+: Use pinctrl constants 2013-06-18 18:53:40 -05:00
omap4-panda-common.dtsi ARM: dts: Fix omap serial wake-up when booted with device tree 2014-05-06 13:48:35 -07:00
omap4-panda-es.dts ARM: dts: omap4-panda-es: Do not reset gpio1 2013-10-20 19:16:53 +02:00
omap4-panda.dts ARM: dts: OMAP2+: Use #include for all device trees 2013-06-18 18:53:38 -05:00
omap4-sdp-es23plus.dts ARM: dts: OMAP2+: Use pinctrl constants 2013-06-18 18:53:40 -05:00
omap4-sdp.dts ARM: dts: Fix omap serial wake-up when booted with device tree 2014-05-06 13:48:35 -07:00
omap4-var-dvk-om44.dts ARM: dts: Add VAR-SOM-OM44 WLAN nodes 2014-05-19 17:20:30 -07:00
omap4-var-om44customboard.dtsi ARM: dts: Add support for OMAP4 Variscite OM44 family 2014-05-19 17:20:30 -07:00
omap4-var-som-om44-wlan.dtsi ARM: dts: Add VAR-SOM-OM44 WLAN nodes 2014-05-19 17:20:30 -07:00
omap4-var-som-om44.dtsi ARM: dts: Add support for OMAP4 Variscite OM44 family 2014-05-19 17:20:30 -07:00
omap4-var-stk-om44.dts ARM: dts: Add VAR-SOM-OM44 WLAN nodes 2014-05-19 17:20:30 -07:00
omap4.dtsi ARM: dts: OMAP4: Add mailbox node 2014-07-15 05:08:56 -07:00
omap5-cm-t54.dts ARM: dts: Change IOPAD macro's for OMAP4/5 2014-05-19 17:20:29 -07:00
omap5-core-thermal.dtsi arm: dts: add omap5 CORE thermal data 2013-12-04 09:34:26 -04:00
omap5-gpu-thermal.dtsi arm: dts: add omap5 GPU thermal data 2013-12-04 09:34:26 -04:00
omap5-sbc-t54.dts ARM: dts: Change IOPAD macro's for OMAP4/5 2014-05-19 17:20:29 -07:00
omap5-uevm.dts ARM: DTS: omap5-uevm: Enable basic audio (McPDM <-> twl6040) 2014-07-15 00:21:25 -07:00
omap5.dtsi Merge branch 'next/fixes-non-critical' into next/soc 2014-07-26 17:54:21 +02:00
omap24xx-clocks.dtsi ARM: dts: omap2 clock data 2014-05-28 13:11:36 +03:00
omap34xx-hs.dtsi ARM: dts: Fix booting for secure omaps 2013-12-06 15:30:43 -08:00
omap34xx-omap36xx-clocks.dtsi ARM: dts: omap3 clock data 2014-01-17 12:36:41 -08:00
omap34xx.dtsi ARM: dts: omap3-n900: Add SSI support 2014-05-27 11:59:44 -07:00
omap36xx-am35xx-omap3430es2plus-clocks.dtsi ARM: dts: fix omap3 dss clock handle names 2014-03-19 09:31:47 +02:00
omap36xx-clocks.dtsi ARM: dts: use ti,fixed-factor-clock for dpll4_m5x2_mul_ck 2014-05-16 17:08:57 +03:00
omap36xx-hs.dtsi ARM: dts: Fix booting for secure omaps 2013-12-06 15:30:43 -08:00
omap36xx-omap3430es2plus-clocks.dtsi ARM: dts: omap3 clocks: simplify ssi aliases 2014-02-28 14:02:25 -08:00
omap36xx.dtsi ARM: dts: omap3-n900: Add SSI support 2014-05-27 11:59:44 -07:00
omap44xx-clocks.dtsi ARM: dts: omap4 clock data 2014-01-17 12:35:57 -08:00
omap54xx-clocks.dtsi Merge branch 'for-v3.16/ti-clk-drv' of github.com:t-kristo/linux-pm into clk-next 2014-06-10 16:53:25 -07:00
omap443x-clocks.dtsi ARM: dts: omap4 clock data 2014-01-17 12:35:57 -08:00
omap443x.dtsi ARM: dts: OMAP4: Add device nodes for ABB 2014-03-05 11:53:36 -08:00
omap446x-clocks.dtsi ARM: dts: omap4 clock data 2014-01-17 12:35:57 -08:00
omap2420-clocks.dtsi ARM: dts: omap2 clock data 2014-05-28 13:11:36 +03:00
omap2420-h4.dts ARM: dts: Remove '0x's from OMAP2420 H4 DTS file 2013-10-08 17:51:40 +02:00
omap2420-n8x0-common.dtsi ARM: OMAP2+: dts: add n8x0 onenand 2013-11-25 15:38:09 -08:00
omap2420-n800.dts ARM: dts: Add basic Nokia N8X0 support 2013-11-25 15:15:24 -08:00
omap2420-n810-wimax.dts ARM: dts: Add basic Nokia N8X0 support 2013-11-25 15:15:24 -08:00
omap2420-n810.dts ARM: dts: Add basic Nokia N8X0 support 2013-11-25 15:15:24 -08:00
omap2420.dtsi ARM: SoC device-tree changes for 3.17 2014-08-08 11:16:58 -07:00
omap2430-clocks.dtsi ARM: dts: omap2 clock data 2014-05-28 13:11:36 +03:00
omap2430-sdp.dts ARM: dts: Add basic device tree support for omap2430 sdp 2013-11-25 15:15:23 -08:00
omap2430.dtsi ARM: SoC device-tree changes for 3.17 2014-08-08 11:16:58 -07:00
omap3430-sdp.dts Add craneboard devices 2014-03-02 14:22:03 -08:00
omap3430es1-clocks.dtsi ARM: dts: fix omap3 dss clock handle names 2014-03-19 09:31:47 +02:00
omap4460.dtsi ARM: dts: OMAP4: Add device nodes for ABB 2014-03-05 11:53:36 -08:00
orion5x-lacie-d2-network.dts ARM: orion5x: convert d2net to Device Tree 2014-04-26 19:45:24 +00:00
orion5x-lacie-ethernet-disk-mini-v2.dts ARM: orion5x: keep TODO list in edmini_v2 DT 2014-04-26 19:45:19 +00:00
orion5x-maxtor-shared-storage-2.dts ARM: orion5x: convert Maxtor Shared Storage II to the Device Tree 2014-04-26 19:45:25 +00:00
orion5x-mv88f5182.dtsi ARM: orion5x: add standard pinctrl configs for sata0 and sata1 2014-04-26 19:45:13 +00:00
orion5x-rd88f5182-nas.dts ARM: orion5x: convert RD-88F5182 to Device Tree 2014-04-26 19:45:22 +00:00
orion5x.dtsi ARM: orion5x: add Device Bus description at SoC level 2014-04-26 19:45:12 +00:00
phy3250.dts
picoxcell-pc3x2.dtsi
picoxcell-pc3x3.dtsi
picoxcell-pc7302-pc3x2.dts
picoxcell-pc7302-pc3x3.dts
pm9g45.dts ARM: at91/dt: pm9g45: crystals frequencies 2014-07-09 19:05:20 +02:00
prima2-evb.dts
prima2.dtsi Merge branch 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm into next 2014-06-05 15:57:04 -07:00
pxa2xx.dtsi
pxa3xx.dtsi ARM: pxa: DTS: override gpio node in pxa3xx.dtsi 2013-08-13 15:51:02 -07:00
pxa27x.dtsi ARM: pxa: add PWM nodes to pxa27x.dtsi 2013-12-11 16:36:47 -08:00
pxa168-aspenite.dts
pxa168.dtsi
pxa910-dkb.dts
pxa910.dtsi
qcom-apq8064-ifc6410.dts ARM: DT: apq8064: Add i2c device nodes 2014-09-17 17:24:20 -05:00
qcom-apq8064-v2.0.dtsi ARM: dts: qcom: Add initial APQ8064 SoC and IFC6410 board device trees 2014-05-29 10:39:07 -05:00
qcom-apq8064.dtsi ARM: DT: apq8064: Add i2c device nodes 2014-09-17 17:24:20 -05:00
qcom-apq8074-dragonboard.dts ARM: dts: qcom: Add I2C dt node for MSM8974 and DB8074 board 2014-09-17 17:23:47 -05:00
qcom-apq8084-ifc6540.dts ARM: dts: qcom: Add initial IFC6540 board device tree 2014-09-11 11:14:00 -05:00
qcom-apq8084-mtp.dts ARM: dts: qcom: Add APQ8084 serial port DT node 2014-08-21 11:43:33 -05:00
qcom-apq8084.dtsi ARM: dts: qcom: Add TLMM DT node for APQ8084 2014-09-11 11:14:05 -05:00
qcom-ipq8064-ap148.dts ARM: dts: qcom: Add SATA support on IPQ8064/AP148 2014-10-16 02:44:47 -05:00
qcom-ipq8064-v1.0.dtsi ARM: qcom: Add initial IPQ8064 SoC and AP148 device trees 2014-08-21 11:43:34 -05:00
qcom-ipq8064.dtsi ARM: dts: qcom: Add SATA support on IPQ8064/AP148 2014-10-16 02:44:47 -05:00
qcom-msm8660-surf.dts ARM: DT: msm8660: Add sdcc nodes 2014-09-22 13:49:41 -05:00
qcom-msm8660.dtsi ARM: DT: msm8660: Add sdcc nodes 2014-09-22 13:49:41 -05:00
qcom-msm8960-cdp.dts ARM: DT: msm8960: Add sdcc nodes 2014-09-22 13:49:43 -05:00
qcom-msm8960.dtsi ARM: DT: msm8960: Add sdcc nodes 2014-09-22 13:49:43 -05:00
qcom-msm8974.dtsi ARM: dts: qcom: Add I2C dt node for MSM8974 and DB8074 board 2014-09-17 17:23:47 -05:00
r7s72100-genmai.dts ARM: shmobile: genmai reference dts: Add RSPI node 2014-07-06 16:29:34 +02:00
r7s72100.dtsi ARM: shmobile: Update r7s72100 DTS to include CPU frequency 2014-06-17 19:50:33 +09:00
r8a73a4-ape6evm-reference.dts ARM: shmobile: ape6evm-reference: Initialise SCIF device using DT 2014-07-12 15:16:57 +02:00
r8a73a4-ape6evm.dts ARM: shmobile: Include all 2 GiB of memory on APE6EVM 2013-12-10 17:27:17 +09:00
r8a73a4.dtsi ARM: shmobile: r8a73a4: Add SCIF nodes 2014-07-12 15:16:57 +02:00
r8a7740-armadillo800eva-reference.dts ARM: shmobile: armadillo800eva-reference: Initialise SCIF device using DT 2014-07-12 15:16:57 +02:00
r8a7740-armadillo800eva.dts ARM: shmobile: Use #include in device tree sources 2013-12-10 17:27:06 +09:00
r8a7740.dtsi ARM: shmobile: r8a7740: Add SCIF nodes 2014-07-12 15:16:57 +02:00
r8a7778-bockw-reference.dts ARM: shmobile: bockw-reference: Initialise SCIF device using DT 2014-07-12 15:16:56 +02:00
r8a7778-bockw.dts ARM: shmobile: Use #include in device tree sources 2013-12-10 17:27:06 +09:00
r8a7778.dtsi ARM: shmobile: r8a7778: Add SCIF nodes 2014-07-12 15:16:56 +02:00
r8a7779-marzen.dts ARM: shmobile: marzen: Consistently use tabs for indentation 2014-07-09 10:36:01 +02:00
r8a7779.dtsi ARM: SoC device-tree changes for 3.17 2014-08-08 11:16:58 -07:00
r8a7790-lager.dts ARM: shmobile: r8a7790: lager: use iic cores instead of i2c 2014-07-11 10:47:06 +02:00
r8a7790.dtsi ARM: shmobile: r8a7790: Fix whitespace errors in pci nodes 2014-07-01 09:35:35 +09:00
r8a7791-henninger.dts ARM: shmobile: henninger: Consistently use tabs for indentation 2014-07-09 10:28:33 +02:00
r8a7791-koelsch.dts ARM: shmobile: koelsch: enable internal PCI 2014-07-08 11:01:15 +02:00
r8a7791.dtsi ARM: SoC device-tree changes for 3.17 2014-08-08 11:16:58 -07:00
rk3xxx.dtsi ARM: dts: rockchip: add watchdog node 2014-07-30 12:14:44 +02:00
rk3066a-bqcurie2.dts ARM: dts: rockchip: add watchdog node 2014-07-30 12:14:44 +02:00
rk3066a.dtsi ARM: dts: rockchip: add watchdog node 2014-07-30 12:14:44 +02:00
rk3188-radxarock.dts ARM: dts: rockchip: add watchdog node 2014-07-30 12:14:44 +02:00
rk3188.dtsi ARM: dts: rockchip: add watchdog node 2014-07-30 12:14:44 +02:00
rk3288-evb-act8846.dts ARM: dts: add rk3288 evaluation board 2014-07-26 13:07:25 +02:00
rk3288-evb-rk808.dts ARM: dts: add rk3288 evaluation board 2014-07-26 13:07:25 +02:00
rk3288-evb.dtsi ARM: dts: Enable USB host0 (EHCI) on rk3288-evb 2014-07-31 05:35:38 +02:00
rk3288.dtsi ARM: dts: Fix the sort ordering of EHCI and HSIC in rk3288.dtsi 2014-08-09 08:22:41 -07:00
s3c24xx.dtsi ARM: dts: SAMSUNG: Add aliases of UART nodes 2014-07-09 17:22:55 -07:00
s3c64xx-pinctrl.dtsi ARM: dts: Add basic dts include files for Samsung S3C64xx SoCs 2013-09-17 06:48:28 +09:00
s3c64xx.dtsi ARM: dts: SAMSUNG: Add aliases of UART nodes 2014-07-09 17:22:55 -07:00
s3c2416-pinctrl.dtsi
s3c2416-smdk2416.dts ARM: dts: add clock data for s3c2416 2014-04-15 02:11:08 +09:00
s3c2416.dtsi ARM: dts: SAMSUNG: Add aliases of UART nodes 2014-07-09 17:22:55 -07:00
s3c6400.dtsi ARM: dts: Add basic dts include files for Samsung S3C64xx SoCs 2013-09-17 06:48:28 +09:00
s3c6410-mini6410.dts ARM: dts: Add dts file for S3C6410-based Mini6410 board 2013-09-17 06:48:29 +09:00
s3c6410-smdk6410.dts ARM: dts: Add dts file for S3C6410-based SMDK6410 board 2013-09-17 06:48:29 +09:00
s3c6410.dtsi ARM: dts: Add basic dts include files for Samsung S3C64xx SoCs 2013-09-17 06:48:28 +09:00
s5pv210-aquila.dts ARM: dts: Add Device tree for s5pc110/s5pv210 boards 2014-07-19 04:31:51 +09:00
s5pv210-goni.dts ARM: dts: Add Device tree for s5pc110/s5pv210 boards 2014-07-19 04:31:51 +09:00
s5pv210-pinctrl.dtsi ARM: dts: Add Device tree for s5pv210 SoC 2014-07-19 04:31:20 +09:00
s5pv210-smdkc110.dts ARM: dts: Add Device tree for s5pc110/s5pv210 boards 2014-07-19 04:31:51 +09:00
s5pv210-smdkv210.dts ARM: dts: Add Device tree for s5pc110/s5pv210 boards 2014-07-19 04:31:51 +09:00
s5pv210-torbreck.dts ARM: dts: Add Device tree for s5pc110/s5pv210 boards 2014-07-19 04:31:51 +09:00
s5pv210.dtsi ARM: dts: Add Device tree for s5pv210 SoC 2014-07-19 04:31:20 +09:00
sama5d3.dtsi ARM: at91/dt: sama5d3 crystals under the clocks node 2014-07-09 18:02:45 +02:00
sama5d3_can.dtsi ARM: at91/dt: define sama5d3 clocks 2013-12-02 15:31:28 +01:00
sama5d3_emac.dtsi ARM: at91/dt: define sama5d3 clocks 2013-12-02 15:31:28 +01:00
sama5d3_gmac.dtsi ARM: at91: change compatibility string for sama5d3x gem 2014-07-24 23:39:55 -07:00
sama5d3_lcd.dtsi ARM: at91/dt: define sama5d3 clocks 2013-12-02 15:31:28 +01:00
sama5d3_mci2.dtsi dt-bindings: clock: Move at91.h to dt-bindigs/clock 2014-04-18 23:44:52 +02:00
sama5d3_tcb1.dtsi dt-bindings: clock: Move at91.h to dt-bindigs/clock 2014-04-18 23:44:52 +02:00
sama5d3_uart.dtsi dt-bindings: clock: Move at91.h to dt-bindigs/clock 2014-04-18 23:44:52 +02:00
sama5d3xcm.dtsi ARM: at91/dt: sama5d3 crystals under the clocks node 2014-07-09 18:02:45 +02:00
sama5d3xdm.dtsi ARM: at91/dt: sama5d3: remove useless adc properties 2014-03-12 19:11:29 +01:00
sama5d3xmb.dtsi ARM: at91: sama5d3xek: switch sound to CCF 2014-07-09 18:02:45 +02:00
sama5d31.dtsi ARM: at91/dt: split sama5d3 peripheral definitions 2013-10-16 15:47:08 +02:00
sama5d31ek.dts ARM: at91/dt: split sama5d3 peripheral definitions 2013-10-16 15:47:08 +02:00
sama5d33.dtsi ARM: at91/dt: split sama5d3 peripheral definitions 2013-10-16 15:47:08 +02:00
sama5d33ek.dts ARM: at91/dt: split sama5d3 peripheral definitions 2013-10-16 15:47:08 +02:00
sama5d34.dtsi ARM: at91/dt: split sama5d3 peripheral definitions 2013-10-16 15:47:08 +02:00
sama5d34ek.dts ARM: at91/dt: split sama5d3 peripheral definitions 2013-10-16 15:47:08 +02:00
sama5d35.dtsi ARM: at91/dt: split sama5d3 peripheral definitions 2013-10-16 15:47:08 +02:00
sama5d35ek.dts ARM: at91/dt: split sama5d3 peripheral definitions 2013-10-16 15:47:08 +02:00
sama5d36.dtsi ARM: at91: fix network interface ordering for sama5d36 2014-03-11 12:49:10 -07:00
sama5d36ek.dts ARM: at91: sama5d3/dt: add sama5d36ek dts files 2013-12-10 09:59:57 -08:00
samsung_k3pe0e000b.dtsi
sh73a0-kzm9g-reference.dts ARM: shmobile: kzm9g-reference: Initialise SCIF device using DT 2014-07-12 15:16:58 +02:00
sh73a0-kzm9g.dts ARM: shmobile: Use #include in device tree sources 2013-12-10 17:27:06 +09:00
sh73a0.dtsi ARM: shmobile: sh73a0: Add SCIF nodes 2014-07-12 15:16:57 +02:00
sh7372-mackerel.dts ARM: shmobile: Use #include in device tree sources 2013-12-10 17:27:06 +09:00
sh7372.dtsi ARM: shmobile: sh7372: Add pin control device to device tree 2013-07-22 10:12:36 +09:00
skeleton.dtsi
skeleton64.dtsi ARM: dts: Fix memory node in skeleton64.dtsi 2013-08-07 16:33:50 +00:00
socfpga.dtsi ARM: SoC device-tree changes for 3.17 2014-08-08 11:16:58 -07:00
socfpga_arria5.dtsi ARM: socfpga: dts: Remove hard coded clock-frequency property 2014-05-05 22:33:15 -05:00
socfpga_arria5_socdk.dts ARM: socfpga: dts: Add DTS entries for USB 2014-05-05 22:33:16 -05:00
socfpga_cyclone5.dtsi ARM: socfpga: dts: Remove hard coded clock-frequency property 2014-05-05 22:33:15 -05:00
socfpga_cyclone5_socdk.dts ARM: socfpga: dts: Add DTS entries for USB 2014-05-05 22:33:16 -05:00
socfpga_cyclone5_sockit.dts ARM: socfpga: dts: Add DTS entries for USB 2014-05-05 22:33:16 -05:00
socfpga_cyclone5_socrates.dts ARM: socfpga: dts: convert to preprocessor includes 2014-05-05 22:33:14 -05:00
socfpga_vt.dts ARM: socfpga: dts: convert to preprocessor includes 2014-05-05 22:33:14 -05:00
spear3xx.dtsi
spear13xx.dtsi ARM: SPEAr13xx: Add pcie and miphy DT nodes 2014-07-14 11:04:43 +05:30
spear300-evb.dts
spear300.dtsi
spear310-evb.dts
spear310.dtsi
spear320-evb.dts
spear320-hmi.dts Shiraz has moved 2014-04-18 16:40:08 -07:00
spear320.dtsi
spear600-evb.dts
spear600.dtsi
spear1310-evb.dts ARM: SPEAr13xx: Add pcie and miphy DT nodes 2014-07-14 11:04:43 +05:30
spear1310.dtsi ARM: SPEAr13xx: Add pcie and miphy DT nodes 2014-07-14 11:04:43 +05:30
spear1340-evb.dts ARM: SPEAr13xx: Add pcie and miphy DT nodes 2014-07-14 11:04:43 +05:30
spear1340.dtsi ARM: SPEAr13xx: Add pcie and miphy DT nodes 2014-07-14 11:04:43 +05:30
st-pincfg.h ARM: STi: OF: Fix a typo in pincfg header 2013-12-04 08:58:39 +00:00
ste-ccu8540-pinctrl.dtsi ARM: ux500: fix devicetree builds 2013-08-14 22:32:07 +02:00
ste-ccu8540.dts arm: dts: Fix missing device_type="memory" for ste-ccu8540 2014-05-16 15:22:40 +01:00
ste-ccu9540.dts ARM: ux500: Convert to the common mmc DT bindings for highspeed mode 2014-05-12 12:52:40 +02:00
ste-dbx5x0.dtsi ARM: ux500: add some DB8500 DMA channel info 2014-07-07 11:54:06 +02:00
ste-href-ab8500.dtsi ARM: ux500: move AB8500 clock out pins to DT 2014-02-04 20:50:50 +01:00
ste-href-ab8505.dtsi ARM: ux500: move last AB8505 set-up to DT 2014-02-04 20:50:55 +01:00
ste-href-family-pinctrl.dtsi ARM: ux500: move the WLAN GPIO pin setup to the device tree 2013-11-26 21:01:56 +01:00
ste-href-stuib.dtsi ARM: ux500: add VCC and VIO regulators to STMPE IC 2014-07-07 11:53:32 +02:00
ste-href-tvk1281618.dtsi ARM: ux500: add misc sensors to the device trees 2014-07-07 11:54:07 +02:00
ste-href.dtsi ARM: ux500: Add a vmmc regulator through DT for the poped eMMC for href 2014-05-12 12:52:44 +02:00
ste-hrefprev60-stuib.dts ARM: ux500: move BU21013 touchpad GPIOs into top-level DTS 2013-10-03 10:29:24 +02:00
ste-hrefprev60-tvk.dts ARM: ux500: split the HREF DTS files from two to four 2013-10-02 16:17:04 +02:00
ste-hrefprev60.dtsi ARM: ux500: move AB8500 GPIOs to device tree 2014-02-04 20:46:50 +01:00
ste-hrefv60plus-stuib.dts ARM: ux500: move BU21013 touchpad GPIOs into top-level DTS 2013-10-03 10:29:24 +02:00
ste-hrefv60plus-tvk.dts ARM: ux500: split the HREF DTS files from two to four 2013-10-02 16:17:04 +02:00
ste-hrefv60plus.dtsi ARM: ux500: add misc sensors to the device trees 2014-07-07 11:54:07 +02:00
ste-nomadik-pinctrl.dtsi ARM: ux500: move GPIO key configuration to device tree 2013-11-26 21:01:56 +01:00
ste-nomadik-s8815.dts ARM: nomadik: fix up double inversion in DT 2014-07-30 12:47:17 -07:00
ste-nomadik-stn8815.dtsi ARM: nomadik: fix up double inversion in DT 2014-07-30 12:47:17 -07:00
ste-snowball.dts ARM: ux500: add misc sensors to the device trees 2014-07-07 11:54:07 +02:00
ste-u300.dts ARM: u300: Convert to the common mmc DT bindings for highspeed mode 2014-05-12 12:52:41 +02:00
stih41x-b2000.dtsi ARM: STi: DT: STiH41x Add clk_ignore_unused to bootargs 2014-05-21 14:27:14 +02:00
stih41x-b2020.dtsi ARM: STi: DT: STiH41x Add clk_ignore_unused to bootargs 2014-05-21 14:27:14 +02:00
stih41x-b2020x.dtsi ARM: STi: stih41x: Add support for the FSM Serial Flash Controller 2014-03-27 02:01:25 +01:00
stih41x.dtsi ARM: sti: stih41x: Provide a proper header for this DTSI file 2014-05-21 14:27:16 +02:00
stih407-b2120.dts ARM: dts: STiH407: Add B2120 board support 2014-05-21 14:20:33 +02:00
stih407-clock.dtsi ARM: dts: Add STiH407 SoC support 2014-05-21 14:20:27 +02:00
stih407-pinctrl.dtsi ARM: dts: Add STiH407 SoC support 2014-05-21 14:20:27 +02:00
stih407.dtsi ARM: dts: Add STiH407 SoC support 2014-05-21 14:20:27 +02:00
stih415-b2000.dts ARM: dts: Fix STi boards compatibles 2014-05-21 14:20:23 +02:00
stih415-b2020.dts ARM: dts: Fix STi boards compatibles 2014-05-21 14:20:23 +02:00
stih415-clock.dtsi ARM: STi: DT: STiH415: 415 DT Entry for clockgen A9 2014-05-21 14:27:14 +02:00
stih415-pinctrl.dtsi Merge tag 'sti-dt-for-v3.16-1' of git://git.stlinux.com/devel/kernel/linux-sti into next/dt 2014-05-23 22:35:56 +02:00
stih415.dtsi ARM: STi: DT: Properly define sti-ethclk & stmmaceth for stih415/6 2014-06-17 16:55:17 +02:00
stih416-b2000.dts ARM: dts: Fix STi boards compatibles 2014-05-21 14:20:23 +02:00
stih416-b2020.dts ARM: dts: Fix STi boards compatibles 2014-05-21 14:20:23 +02:00
stih416-b2020e.dts ARM: stih41x: Rename stih416-b2020-revE.dts to stih416-b2020e.dts 2014-06-19 10:45:36 +02:00
stih416-clock.dtsi ARM: STi: DT: STiH416: 416 DT Entry for clockgen A9/DDR/GPU 2014-05-21 14:27:11 +02:00
stih416-pinctrl.dtsi Merge tag 'sti-dt-for-v3.16-1' of git://git.stlinux.com/devel/kernel/linux-sti into next/dt 2014-05-23 22:35:56 +02:00
stih416.dtsi ARM: STi: DT: Properly define sti-ethclk & stmmaceth for stih415/6 2014-06-17 16:55:17 +02:00
sun4i-a10-a1000.dts ARM: dts: sun4i: Add ir node to various boards 2014-07-01 10:05:38 +02:00
sun4i-a10-ba10-tvbox.dts ARM: dts: sun4i: Add new ba10-tvbox board 2014-07-01 10:01:16 +02:00
sun4i-a10-cubieboard.dts ARM: dts: sun4i: Add ir node to various boards 2014-07-01 10:05:38 +02:00
sun4i-a10-hackberry.dts ARM: dts: sun4i: Add ir node to various boards 2014-07-01 10:05:38 +02:00
sun4i-a10-inet97fv2.dts ARM: dts: sun4i: Add AXP209 support to various boards 2014-07-01 09:48:54 +02:00
sun4i-a10-mini-xplus.dts ARM: dts: sun4i: Add ir node to various boards 2014-07-01 10:05:38 +02:00
sun4i-a10-olinuxino-lime.dts ARM: dts: sun4i: Add AXP209 support to various boards 2014-07-01 09:48:54 +02:00
sun4i-a10-pcduino.dts ARM: dts: sun4i: Add AXP209 support to various boards 2014-07-01 09:48:54 +02:00
sun4i-a10.dtsi ARM: dts: sun4i: Add ir controller nodes and pinmux 2014-07-01 10:05:20 +02:00
sun5i-a10s-olinuxino-micro.dts ARM: dts: sun5i: Add reg_vcc3v3 to sun5i board mmc nodes 2014-05-11 19:07:07 +02:00
sun5i-a10s-r7-tv-dongle.dts ARM: dts: sun5i: Add new A10s r7 hdmi tv dongle board 2014-05-12 17:06:55 +02:00
sun5i-a10s.dtsi ARM: dts: sunxi: Add #interrupt-cells to pinctrl nodes 2014-07-01 09:48:53 +02:00
sun5i-a13-olinuxino-micro.dts ARM: dts: sun5i: Add reg_vcc3v3 to sun5i board mmc nodes 2014-05-11 19:07:07 +02:00
sun5i-a13-olinuxino.dts ARM: dts: sun5i: Add reg_vcc3v3 to sun5i board mmc nodes 2014-05-11 19:07:07 +02:00
sun5i-a13.dtsi ARM: dts: sunxi: Add #interrupt-cells to pinctrl nodes 2014-07-01 09:48:53 +02:00
sun6i-a31-app4-evb1.dts ARM: sunxi: dt: add APP4-EVB1 board support 2014-05-14 14:30:05 +02:00
sun6i-a31-colombus.dts ARM: sun6i: Add MMC0 controller to the Colombus board 2014-05-22 10:49:21 +02:00
sun6i-a31-hummingbird.dts ARM: dts: sun6i: Add Merrii A31 Hummingbird support 2014-07-18 22:40:37 +02:00
sun6i-a31-m9.dts ARM: dts: sun6i: Add reg_vcc3v3 to sun6i board mmc nodes 2014-05-11 19:07:10 +02:00
sun6i-a31.dtsi ARM: dts: sun6i: Add ethernet alias for GMAC 2014-07-18 22:36:54 +02:00
sun7i-a20-cubieboard2.dts ARM: dts: sun7i: Add AXP209 support to various boards 2014-07-01 09:48:54 +02:00
sun7i-a20-cubietruck.dts ARM: dts: sun7i: Add AXP209 support to various boards 2014-07-01 09:48:54 +02:00
sun7i-a20-i12-tvbox.dts ARM: dts: sun7i: Add ir receiver support to a20-i12-tvbox 2014-07-01 09:48:55 +02:00
sun7i-a20-olinuxino-micro.dts ARM: dts: sun7i: Add AXP209 support to various boards 2014-07-01 09:48:54 +02:00
sun7i-a20-pcduino3.dts ARM: dts: sun7i: Add board support for LinkSprite pcDuino V3 2014-07-01 09:49:37 +02:00
sun7i-a20.dtsi ARM: dts: sun7i: Rename sun7i-a20-ir to sun4i-a10-ir 2014-07-01 09:48:55 +02:00
sun8i-a23-ippo-q8h-v5.dts ARM: sun8i: dt: Add Ippo-q8h v5 support 2014-07-01 09:48:50 +02:00
sun8i-a23.dtsi ARM: sun8i: Add PRCM clock and reset controller nodes to the DTSI 2014-07-15 08:54:16 +02:00
sunxi-common-regulators.dtsi ARM: sunxi: Add fixed 3V regulator 2014-05-21 10:23:32 +02:00
tegra20-colibri-512.dtsi ARM: SoC DT updates for 3.14 2014-01-23 18:45:38 -08:00
tegra20-harmony.dts ARM: tegra: Remove legacy PCIe power supply properties 2014-07-18 11:20:10 +02:00
tegra20-iris-512.dts ARM: tegra: convert dts files of Tegra20 platforms to use pinctrl defines 2013-12-16 14:09:20 -07:00
tegra20-medcom-wide.dts ARM: tegra: tamonten: add the display to the Medcom Wide 2014-07-17 15:02:10 +02:00
tegra20-paz00.dts ARM: tegra: paz00: Fix some indentation inconsistencies 2014-07-30 12:48:52 -07:00
tegra20-plutux.dts ARM: tegra: tamonten: add the base board regulators 2014-07-17 15:02:09 +02:00
tegra20-seaboard.dts ARM: tegra: enable LCD panel on Seaboard 2014-02-19 10:15:37 -07:00
tegra20-tamonten.dtsi ARM: SoC driver changes for 3.17 2014-08-08 11:34:32 -07:00
tegra20-tec.dts ARM: tegra: tamonten: add the base board regulators 2014-07-17 15:02:09 +02:00
tegra20-trimslice.dts ARM: tegra: Remove legacy PCIe power supply properties 2014-07-18 11:20:10 +02:00
tegra20-ventana.dts ARM: tegra: enable LCD panel on Ventana 2014-02-19 10:15:45 -07:00
tegra20-whistler.dts ARM: tegra: set up /aliases entries for RTCs 2013-12-18 14:10:48 -07:00
tegra20.dtsi ARM: SoC cleanups for 3.17 2014-08-08 11:00:26 -07:00
tegra30-apalis-eval.dts ARM: tegra: apalis t30: fix device tree compatible node 2014-07-30 12:49:00 -07:00
tegra30-apalis.dtsi ARM: tegra: Migrate Apalis T30 PCIe power supply scheme 2014-07-17 15:02:10 +02:00
tegra30-beaver.dts ARM: tegra: Remove legacy PCIe power supply properties 2014-07-18 11:20:10 +02:00
tegra30-cardhu-a02.dts ARM: tegra: fix node sort order 2013-12-16 14:09:17 -07:00
tegra30-cardhu-a04.dts ARM: tegra: fix node sort order 2013-12-16 14:09:17 -07:00
tegra30-cardhu.dtsi ARM: tegra: Remove legacy PCIe power supply properties 2014-07-18 11:20:10 +02:00
tegra30-colibri-eval-v3.dts ARM: tegra: initial add of Colibri T30 2014-05-15 12:30:40 -06:00
tegra30-colibri.dtsi ARM: tegra: initial add of Colibri T30 2014-05-15 12:30:40 -06:00
tegra30.dtsi ARM: SoC cleanups for 3.17 2014-08-08 11:00:26 -07:00
tegra114-dalmore.dts ARM: tegra: add SD wp-gpios to Dalmore DT 2014-04-29 10:09:54 -06:00
tegra114-roth.dts ARM: tegra: roth: add display DT node 2014-07-17 15:02:14 +02:00
tegra114-tn7.dts ARM: tegra: add Tegra Note 7 device tree 2014-05-02 12:17:11 -06:00
tegra114.dtsi ARM: SoC cleanups for 3.17 2014-08-08 11:00:26 -07:00
tegra124-jetson-tk1.dts ARM: tegra: Fix typoed ams,ext-control properties 2014-07-17 15:02:13 +02:00
tegra124-venice2.dts ARM: tegra: Fix typoed ams,ext-control properties 2014-07-17 15:02:13 +02:00
tegra124.dtsi ARM: SoC device-tree changes for 3.17 2014-08-08 11:16:58 -07:00
tny_a9g20.dts
tny_a9260.dts
tny_a9260_common.dtsi ARM: at91/dt: tny_a9260: define crystals frequencies 2014-07-09 19:05:15 +02:00
tny_a9263.dts ARM: at91/dt: tny_a9263: define crystals frequencies 2014-07-09 19:05:22 +02:00
tps6507x.dtsi
tps65217.dtsi
tps65910.dtsi ARM: dts: tps65910 backup battery regulator 2014-02-28 13:52:25 -08:00
twl4030.dtsi ARM: dts: twl4030: Add madc 2014-05-06 10:19:49 -07:00
twl4030_omap3.dtsi ARM: dts: Configure omap3 twl4030 I2C4 pins by default 2014-05-06 15:45:14 -07:00
twl6030.dtsi
twl6030_omap4.dtsi ARM: dts: twl6030: Move common configuration for OMAP4 boards in a separate dtsi file 2013-10-08 17:51:41 +02:00
usb_a9g20-dab-mmx.dtsi
usb_a9g20.dts
usb_a9g20_common.dtsi
usb_a9g20_lpw.dts
usb_a9260.dts
usb_a9260_common.dtsi ARM: at91/dt: usb_a9260: define crystals frequencies 2014-07-09 19:05:14 +02:00
usb_a9263.dts ARM: at91/dt: usb_a9263: define crystals frequencies 2014-07-09 19:05:23 +02:00
versatile-ab.dts The branch contains the following device tree changes the v3.17 merge 2014-08-14 09:53:39 -06:00
versatile-pb.dts The branch contains the following device tree changes the v3.17 merge 2014-08-14 09:53:39 -06:00
vexpress-v2m-rs1.dtsi mfd: vexpress: Define the device as MFD cells 2014-05-15 17:02:19 +01:00
vexpress-v2m.dtsi mfd: vexpress: Define the device as MFD cells 2014-05-15 17:02:19 +01:00
vexpress-v2p-ca5s.dts dts: ca5: add the global timer for the A5 2014-04-22 11:44:26 +02:00
vexpress-v2p-ca9.dts
vexpress-v2p-ca15-tc1.dts
vexpress-v2p-ca15_a7.dts mfd: vexpress: Convert custom func API to regmap 2014-05-15 17:02:18 +01:00
vf610-colibri.dts ARM: dts: add initial Colibri VF61 board support 2014-05-16 23:01:49 +08:00
vf610-cosmic.dts ARM: dts: vf610: make pinctrl nodes board specific 2014-02-09 21:32:28 +08:00
vf610-pinfunc.h
vf610-twr.dts ARM: dts: vf610-twr: Enables FTM PWM device. 2014-05-16 23:01:45 +08:00
vf610.dtsi ARM: dts: vf610: add FlexCAN node 2014-07-18 16:49:47 +08:00
vt8500-bv07.dts
vt8500.dtsi net: via-rhine: add OF bus binding 2014-04-23 15:24:06 -04:00
wm8505-ref.dts
wm8505.dtsi
wm8650-mid.dts
wm8650.dtsi net: via-rhine: add OF bus binding 2014-04-23 15:24:06 -04:00
wm8750-apc8750.dts
wm8750.dtsi
wm8850-w70v2.dts ARM: dts: Use the PWM polarity flags 2013-09-03 13:08:11 +02:00
wm8850.dtsi net: via-rhine: add OF bus binding 2014-04-23 15:24:06 -04:00
xenvm-4.2.dts
zynq-7000.dtsi ARM: zynq: DT: Add CAN node 2014-07-29 07:31:40 +02:00
zynq-parallella.dts ARM: zynq: DT: Remove DMA from board DTs 2014-07-29 07:33:02 +02:00
zynq-zc702.dts ARM: zynq: DT: Add CAN node 2014-07-29 07:31:40 +02:00
zynq-zc706.dts ARM: zynq: dt: Add I2C nodes to Zynq device tree 2014-04-22 09:30:49 +02:00
zynq-zed.dts ARM: dts: zynq: Add SDHCI nodes 2014-01-31 14:58:56 -08:00