Martin T. H. Sandsmark
|
b703b09a7c
|
zero-gravitas: set the BATLOWEN bit if not set when booting
|
2017-07-31 15:20:23 +02:00 |
|
Martin T. H. Sandsmark
|
1b7060f27e
|
fix logic for displaying low battery splash
|
2017-05-26 20:15:30 +02:00 |
|
Martin T. H. Sandsmark
|
270b026103
|
add boot arg that says why the board booted
|
2017-05-26 19:49:26 +02:00 |
|
Martin T. H. Sandsmark
|
0d0a7a9d21
|
fix build without epdc support
|
2017-05-22 14:28:34 +02:00 |
|
Martin T. H. Sandsmark
|
9e8b0dad07
|
fix build without epdc
|
2017-04-24 18:54:19 +02:00 |
|
Martin T. H. Sandsmark
|
39b981fc4f
|
try to handle low power situations
|
2017-04-24 18:54:02 +02:00 |
|
Martin T. H. Sandsmark
|
4ef80c1c15
|
epdc_setup: fix build without epdc stuff
|
2017-04-24 18:53:11 +02:00 |
|
Martin T. H. Sandsmark
|
56a8d48df8
|
board: fix board name
|
2017-02-10 17:23:06 +01:00 |
|
Martin T. H. Sandsmark
|
d177e67478
|
board: power off automatically if battery is low and not charging
|
2017-02-10 17:20:17 +01:00 |
|
Martin T. H. Sandsmark
|
89394643ee
|
board: do the epdc pmic gpio init in the right place
|
2017-02-10 16:12:38 +01:00 |
|
Martin T. H. Sandsmark
|
fce825d4b9
|
board: update SPL code to match DCD, add usb failsafe boot mode
|
2017-02-10 16:11:51 +01:00 |
|
Martin T. H. Sandsmark
|
09627d5f52
|
board: fix failing to detect failsafe key press
|
2017-02-10 16:10:19 +01:00 |
|
Martin T. H. Sandsmark
|
ff69e58e1f
|
board: add command to jump to hab failsafe for debugging
|
2017-02-10 16:08:24 +01:00 |
|
Martin T. H. Sandsmark
|
416bde753a
|
board: fix display timing info
|
2017-02-10 15:50:31 +01:00 |
|
Martin T. H. Sandsmark
|
ab4dbd1024
|
board: add command for checking battery status, for debugging
|
2017-02-10 15:34:31 +01:00 |
|
Martin T. H. Sandsmark
|
400273f192
|
board: fix reading of charging status
|
2017-02-10 15:28:58 +01:00 |
|
Martin T. H. Sandsmark
|
9c265ea028
|
board: simplify iomuxing with appropriate define
|
2017-02-10 15:16:42 +01:00 |
|
Martin T. H. Sandsmark
|
23f85ebd9b
|
dcd: fix reinitialization of DDR
|
2017-01-30 14:55:00 +01:00 |
|
Martin T. H. Sandsmark
|
483198b94e
|
Try to clean up the epdc driver a bit
|
2016-12-04 22:32:37 +01:00 |
|
Martin T. H. Sandsmark
|
e0d40e16d6
|
Remove custom splash loading, use standard uboot splash stuff
|
2016-12-04 22:17:59 +01:00 |
|
Martin T. H. Sandsmark
|
1bc287e726
|
Try to set clocks before jumping to HAB failsafe
This is what the bare-metal SDK does
|
2016-12-04 20:04:50 +01:00 |
|
Martin T. H. Sandsmark
|
6e86f08d1c
|
Add splash screen for our board using EPDC
|
2016-12-04 20:03:55 +01:00 |
|
Martin T. H. Sandsmark
|
3a42eb901b
|
Disable automatic power-on circuitry when starting
|
2016-12-04 19:32:30 +01:00 |
|
Martin T. H. Sandsmark
|
60e1615193
|
Add support for checking gpio keys for magic keypress as well
|
2016-12-04 19:31:21 +01:00 |
|
Martin T. H. Sandsmark
|
ee5aa5e375
|
fix battery checking, only print out status for now
|
2016-12-02 11:28:22 +01:00 |
|
Martin T. H. Sandsmark
|
cd0e6f0b2f
|
improve readability of DCD by using defines and comments
|
2016-12-02 11:23:40 +01:00 |
|
Martin T. H. Sandsmark
|
c1794c409e
|
Start on battery checking during boot
|
2016-12-02 11:14:47 +01:00 |
|
Martin T. H. Sandsmark
|
e7ffea40ea
|
Verify PMIC version before trying to interact with it
|
2016-10-19 10:35:19 +02:00 |
|
Martin T. H. Sandsmark
|
be004af0e7
|
Move pf100 debug output into separate function, dump SW4 and OTP register values
|
2016-10-19 10:34:59 +02:00 |
|
Martin T. H. Sandsmark
|
afaeaaec02
|
Remove FEC support, do our own bringup of the pf100, try to set the SW4
voltage of the PF100.
|
2016-10-11 10:08:31 +02:00 |
|
Martin T. H. Sandsmark
|
47a01543d2
|
Print the contents of the INSTAT registers on boot
|
2016-09-28 11:58:45 +02:00 |
|
Martin T. H. Sandsmark
|
32b32132d2
|
Add hack to launch USB serial download mode on magic key press
|
2016-09-27 18:42:02 +02:00 |
|
Martin T. H. Sandsmark
|
2a7419c1d8
|
Fix MAINTAINERS
|
2016-09-07 09:31:21 +02:00 |
|
Martin T. H. Sandsmark
|
e0be6171bb
|
Document the clocks in DCD
|
2016-08-23 12:12:28 +02:00 |
|
Martin T. H. Sandsmark
|
5fee53e5d1
|
Add RST pin to USDHC2
|
2016-08-23 10:37:29 +02:00 |
|
Martin T. H. Sandsmark
|
3d874ddfd3
|
Bring up clocks in DCD
|
2016-08-23 10:34:44 +02:00 |
|
Martin T. H. Sandsmark
|
b04283e042
|
Disable CD pins for usdhc2 and usdhc3
|
2016-08-23 10:30:30 +02:00 |
|
Martin T. H. Sandsmark
|
3588b75eb3
|
Adjust for mmc changes
|
2016-08-16 20:28:06 +02:00 |
|
Martin T. H. Sandsmark
|
9fed9e35b4
|
Manually enable UART clock, this might be done in the DCD instead
|
2016-08-15 19:10:05 +02:00 |
|
Martin T. H. Sandsmark
|
4e37642b7c
|
fix format of dcd data
|
2016-08-11 17:56:25 +02:00 |
|
Martin T. H. Sandsmark
|
3816c1aeaf
|
Yank out DCD from old Freescale example for imx6sl + ddr3
|
2016-08-04 17:05:00 +02:00 |
|
Martin T. H. Sandsmark
|
db2fdc22f6
|
Revert "Replace DCD with one from Kaifa"
This was still non-bootable for Kaifa.
This reverts commit 30648ce8d2867915c80c4e22646ab815151f044f.
|
2016-08-04 13:13:17 +02:00 |
|
Martin T. H. Sandsmark
|
98363af830
|
Try to update the SPL DDR init code, based on the sabresd code using DDR3
|
2016-08-04 13:12:50 +02:00 |
|
Martin T. H. Sandsmark
|
f6eaee96b1
|
Replace DCD with one from Kaifa
|
2016-08-04 11:59:40 +02:00 |
|
Martin T. H. Sandsmark
|
f3695d5c01
|
fix build
|
2016-07-29 15:20:04 +02:00 |
|
Martin T. H. Sandsmark
|
e37df70399
|
Update position of our configs
|
2016-07-29 15:07:43 +02:00 |
|
Martin T. H. Sandsmark
|
f7bfa2a059
|
update our defconfig
|
2016-07-29 14:37:49 +02:00 |
|
Martin T. H. Sandsmark
|
d45d9c0452
|
Update naming and metadata for our device
|
2016-07-29 14:35:59 +02:00 |
|
Martin T. H. Sandsmark
|
4ed481c16a
|
Update DCD based on calculations in DDR calculation spreadsheet
|
2016-07-29 14:09:32 +02:00 |
|
Martin T. H. Sandsmark
|
87e4148ec8
|
Start creating our own board config based on imx6slevk
|
2016-07-29 12:40:01 +02:00 |